Undergoing lignin-coated seeds to cold plasma to enhance the growth of wheat seedlings and obtain future outcome under stressed ecosystems

Climate changes threat global food security and food production. Soil salinization is one of the major issues of changing climate, causing adverse impacts on agricultural crops. Germination and seedlings establishment are damaged under these conditions, so seeds must be safeguard before planting. Here, we use recycled organic tree waste combined with cold (low-pressure) plasma treatment as grain coating to improve the ability of wheat seed cultivars (Misr-1 and Gemmeza-11) to survive, germinate and produce healthy seedlings. The seeds were coated with biofilms of lignin and hash carbon to form a protective extracellular polymeric matrix and then exposed them to low-pressure plasma for different periods of time. The effectiveness of the coating and plasma was evaluated by characterizing the physical and surface properties of coated seeds using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) spectroscopy, and wettability testing. We also evaluated biological and physiological properties of coated seeds and plants they produced by studying germination and seedling vigor, as well as by characterizing fitness parameters of the plants derived from the seeds. The analysis revealed the optimal plasma exposure time to enhance germination and seedling growth. Taken together, our study suggests that combining the use of recycled organic tree waste and cold plasma may represent a viable strategy for improving crop seedlings performance, hence encouraging plants cultivation in stressed ecosystems.

Hyper-crosslinked Isoporous Block Copolymer Membranes with Robust Solvent Resistance and Customized Pore Sizes for Precise Separation

Isoporous block copolymer membranes are viewed as the next-generation separation membranes for their unique structures and urgent application in precise separation. However, an obvious weakness for such membranes is their poor solvent-resistance which limits their applications to aqueous solution, and isoporous membranes with superior solvent-resistance and tunable pore size have been rarely prepared before. Herein, self-supporting isoporous membranes with excellent solvent resistance are prepared by the facile yet robust hyper-crosslinking approach which is able to create a rigid network in whole membranes. The hyper-crosslinking is found to be a novel and non-destructive approach that does not change pore size and isoporous structure during the reaction, and the resulting hyper-crosslinked isoporous membranes display superior structural and separation stability to a broad range of solvents with varied polarities for months to years. More importantly, hyper-crosslinking has proved to be a universal strategy that is applicable to isoporous membranes with varied pore size and pore chemistry, offering an important opportunity to prepare solvent-resistant isoporous membranes with customizable pore size and pore functionality that are important to realize their accurate separations in organic solvents. This concept is demonstrated finally by precise and on-demand separation of nanoparticles with the prepared membranes.

Fabrication of Organic Solvent Nanofiltration Membrane through Interfacial Polymerization Using N-Phenylthioure as Monomer for Dimethyl Sulfoxide Recovery

To recover dimethyl sulfoxide, an organic solvent nanofiltration membrane is prepared via the interfacial polymerization method. N-Phenylthiourea (NP)is applied as a water-soluble monomer, reacted with trimesoyl chloride (TMC) on the polyetherimide substrate crosslinked by ethylenediamine. The results of attenuated total reflectance-fourier transform infrared spectroscopy and X-ray electron spectroscopy confirm that N-Phenylthiourea reacts with TMC. The membrane morphology is investigated through atomic force microscopy and scanning electronic microscopy, respectively. The resultant optimized TFC membranes NF-1NP exhibited stable permeance of about 4.3 L m−2 h−1 bar-1 and rejection of 97% for crystal violet (407.98 g mol−1) during a 36 h continuous separation operation. It was also found that the NF-1NP membrane has the highest rejection rate in dimethyl sulfoxide (DMSO), and the rejection rates in methanol, acetone, tetrahydrofuran, ethyl acetate and dimethylacetamide(DMAc) are 51%, 84%, 94%, 96% and 92% respectively. The maximum flux in the methanol system is 11 L m−2 h−1 bar−1, while that in acetone, tetrahydrofuran, ethyl acetate and DMAc is 4.3 L m−2 h−1 bar−1, 6.3 L m−2 h−1 bar−1, 3.2 L m−2 h−1 bar−1, 4.9 L m−2 h−1 bar−1 and 2.1 L m−2 h−1 bar−1, respectively. It was also found that the membrane prepared by N-Phenylthiourea containing aromatic groups has lower mobility and stronger solvent resistance than that of by thiosemicarbazide.

Extraction, Characterization, and Antioxidant Activity of Polysaccharides from Ajwa Seed and Flesh

The date palm has been cultivated in dry and hot areas of the planet for much of human history. In the Kingdom of Saudi Arabia, dates are the main crop used as a source of food. Among several species of date fruits, the Ajwa AL-Madinah date is unique, growing only in Al-Madinah geographical region. The Ajwa date is used in traditional medicine due to its abundant active components and therapeutic properties. This study investigates the structural properties and the antioxidant effects of water-soluble polysaccharides extracted from Ajwa flesh and seed. The polysaccharides were isolated by two techniques including hot water and ultrasonic extraction. After isolation and partial purification, the physicochemical properties of four samples of polysaccharides extracted from flesh and seed were studied by several techniques including FTIR, solid-state NMR, elemental analysis, and mass spectrometry. Several radical scavenging experiments were combined to study the antioxidant activity of the polysaccharide compounds. FTIR and NMR results showed a structure typical of heterogeneous polysaccharides. Mass spectrometry revealed that the polysaccharide samples were composed mainly of mannose, glucose, galactose, xylose, arabinose, galacturonic acid, and fucose. In addition, the physicochemical properties and composition of polysaccharides extracted from flesh and seed were compared. The extracted polysaccharides showed antioxidant activity, with 2, 2′-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging, Fe chelating ability, hydroxyl free radical scavenging ability, and 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging. These results highlight their potential to be a useful nutritional element or supplemental medication.

Fine-tuning of carbon nanostructures/alginate nanofiltration performance: Towards electrically-conductive and self-cleaning properties

Electrically-conductive membranes became the center of attention owing to their enhanced ion selectivity and self-cleaning properties. Carbon nanostructures (CNS) attain high electrical conductivity, and fast water transport. Herein, we adopt a water-based, simple method to entrap CNS within Alginate network to fabricate self-cleaning nanofiltration membranes. CNS are embedded into membranes to improve the swelling/shrinkage resistivity, and to achieve electrical-conductivity. The CaAlg PEG-formed pores are tuned by organic-inorganic network via silane crosslinking. Flux/rejection profiles of Na₂SO₄ are studied/optimized in reference to fabrication parameters. 90% Na₂SO₄ rejection (7 LMH) is achieved for silane-CaAlg₂₀₀-10% CNS membranes. Membranes exhibit outstanding electrical conductivity (∼2858 S m^-1), which is attractive for fouling control. CaAlg/CNS membranes are tested to treat dye/saline water via two-stage filtration, namely, dye/salt separation and desalination. A successful dye/salt separation is achieved at the first stage with a rejection of 100%-RB and only 3.1% Na₂SO₄, and 54% Na₂SO₄ rejection in the second stage.

Untargeted Metabolomic Profiling and Antioxidant Capacities of Different Solvent Crude Extracts of Ephedra foeminea

Ephedra foeminea is a traditional medicinal plant used in the Eastern Mediterranean region. This study aims to investigate the chemical profiles of different solvent extracts of E. foeminea via an untargeted metabolomics approach, alongside determining their antioxidant capacities. E. foeminea samples collected from Jordan were macerated in solvents of varying polarities; dichloromethane/methanol, methanol, ethanol, ethyl acetate, and acetone. The crude extracts were subjected to comprehensive chemical profiling and metabolomics study using Gas chromatography–Mass spectrometry (GC–MS), Liquid chromatography–Mass spectrometry (LC–MS), and Nuclear Magnetic Resonance (NMR). The obtained data were analyzed using Venn diagrams, Principle Component Analysis (PCA), and Metabolite Enrichment Set Analysis (MESA). ABTS assay was performed to measure the crude extracts’ antioxidant activity. MESA revealed the dominant chemical groups as amino acids, fatty acids, carboxylic acids, and carbohydrates. Results indicated that dichloromethane/methanol and methanolic extracts had the most distinct composition as well as the most unique compounds. The methanolic extract had the most potency (IC50 249.6 µg/mL) in the ABTS assay. However, no significant differences were found. In conclusion, solvents influenced the recovery of metabolites in E. foeminea and the antioxidant activity of the E. foeminea methanolic extract could be correlated to the abundant presence of diverse bioactive compounds.

Fabrication of Poly(amide-co-ester) Solvent Resistant Nanofiltration Membrane from P-nitrophenol and Trimethyl Chloride via Interfacial Polymerization

P-nitrophenol (PNP), a refractory hazardous substance, has not been efficiently utilized so far. In this paper, PNP is used as a membrane modification material for preparing poly(amide-co-ester) composite nanofiltration membrane. An organic solvent nanofiltration (OSN) membrane was prepared via interfacial polymerization reactionby using PNP and trimethyl chloride (TMC) on a ethylenediamine (EDA) crosslinked polyetherimide substrate. The results of ATR-FTIR and XPS show that interfacial polymerization occurs among with PNP and TMC and the terminal amine groups on the ethylenediamine crosslinked -PEI support forming a poly(amide-co-ester) toplayer. The NF-1PNP membrane maintained stable DMF performance permeance of 2.2 L m−2 h−1 bar−1 and rejection of 98% for Rose Bengal red (RB 1017.64 g mol−1) in 36 h continuous separation process. Furthermore, the average pore diameter of the two membranes including NF-1PNP and NF-1.25PNP, which is 0.40 and 0.36nm, respectively. This study not only provides a good way for the preparation of OSN membrane, but also provides a good demonstration for the comprehensive utilization of PNP and other toxic and harmful pollutants.

Cross-Linked Polycarbonate Microfiltration Membranes with Improved Solvent Resistance

In this study, we report a facile preparation of an organic solvent-resistant membrane through the formation of urethane bonds between polycarbonate and polyethyleneimine groups. The modified membrane was further cross-linked with 1,4-butanediol diglycidyl ether (BDG) to enhance its solvent resistance as well as its thermal and mechanical stability. The cross-linked polycarbonate membranes exhibited improved solvent resistance with various organic solvents, giving a maximum swelling degree of 6%. It also showed better mechanical and thermal stability, as well as excellent permeance and rejection performance. This study demonstrates BDG as an attractive cross-linker for polycarbonate microfiltration membranes to transform them toward organic solvent filtration applications.

High-Performance, Free-Standing Symmetric Hybrid Membranes for Osmotic Separation

The internal concentration polarization (ICP) of asymmetric osmotic membranes with support layers greatly reduced membrane water permeability, therefore compromising membrane performance. In this study, a series of free-standing symmetric hybrid forward osmosis (FO) membranes without experiencing ICP were fabricated by covalently linking metal-organic framework (MOF) nanofillers with a polymer matrix. Owing to the introduction of MOFs, which allow only water permeation but reject salts by steric hindrance, the prepared hybrid membranes could approach the empirical permeability-selectivity trade-off. The optimized hybrid membrane displayed an outstanding water/Na₂SO₄ selectivity of ∼1208.4 L mol^-1, compared with that of conventional membranes of ∼375.6 L mol^-1. Additionally, the fabricated hybrid membranes showed excellent mechanical robustness, maintaining structural integrity during the long-term FO separation of high-salinity solution. This work provides an effective methodology to fabricate high-performance, symmetric MOF-based membranes for osmotic separation processes such as seawater desalination and water purification.

Using NMR spectroscopy to investigate the role played by copper in prion diseases

Prion diseases are a group of rare neurodegenerative disorders that develop as a result of the conformational conversion of normal prion protein (PrPC) to the disease-associated isoform (PrPSc). The mechanism that actually causes disease remains unclear. However, the mechanism underlying the conformational transformation of prion protein is partially understood-in particular, there is strong evidence that copper ions play a significant functional role in prion proteins and in their conformational conversion. Various models of the interaction of copper ions with prion proteins have been proposed for the Cu (II)-binding, cell-surface glycoprotein known as prion protein (PrP). Changes in the concentration of copper ions in the brain have been associated with prion diseases and there is strong evidence that copper plays a significant functional role in the conformational conversion of PrP. Nevertheless, because copper ions have been shown to have both a positive and negative effect on prion disease onset, the role played by Cu (II) ions in these diseases remains a topic of debate. Because of the unique properties of paramagnetic Cu (II) ions in the magnetic field, their interactions with PrP can be tracked even at single atom resolution using nuclear magnetic resonance (NMR) spectroscopy. Various NMR approaches have been utilized to study the kinetic, thermodynamic, and structural properties of Cu (II)-PrP interactions. Here, we highlight the different models of copper interactions with PrP with particular focus on studies that use NMR spectroscopy to investigate the role played by copper ions in prion diseases.

Extraction, Characterization, and Anticoagulant Activity of a Sulfated Polysaccharide from Bursatella leachii Viscera

Bioactive compounds for drug discovery are increasingly extracted and purified from natural sources including marine organisms. Heparin is a therapeutic agent that has been used for several decades as an anticoagulant. However, heparin is known to cause many undesirable complications such as thrombocytopenia and risk of hemorrhage. Hence, there is a need to find alternatives to current widely used anticoagulant drugs. Here, we extract a sulfated polysaccharide from sea hare, that is, Bursatella leachii viscera, by enzymatic digestion. Several analytical approaches including elemental analysis, Fourier-transform infrared spectroscopy, nuclear magnetic resonance, and high-performance liquid chromatography-mass spectrometry analysis show that B. leachii polysaccharides have chemical structures similar to glycosaminoglycans. We explore the anticoagulant activity of the B. leachii extract using the activated partial thromboplastin time and the thrombin time. Our results demonstrate that the extracted sulfated polysaccharide has heparin-like anticoagulant activity, thus showing great promise as an alternative anticoagulant therapy.

Synthetic polymer materials for forward osmosis (FO) membranes and FO applications: a review

Forward osmosis (FO) has played an important role in alleviating the problems caused by freshwater shortage and water contamination in recent years. However, issues of low water permeability, reverse solute diffusion, concentration polarization and membrane fouling are still widely present in FO processes. These challenges are the current research focus in exploring novel FO membranes. Fabricating FO membranes from chemically modified commercial polymers is a relatively novel approach and has proven effective in obtaining appropriate FO membranes. This paper focuses on the progress of FO membranes made specially from chemically modified polymer materials. First of all, a brief overview of commercial polymers commonly used for FO membrane fabrication is provided. Secondly, the chemical modification strategies and synthesis routes of novel polymer materials as well as the resultant FO membrane performance are presented. The strengths and weaknesses of chemical modifications on polymer materials are assessed. Then, typical FO applications facilitated by the FO membranes made from modified polymer materials are exemplified. Finally, challenges and future directions in exploring novel polymers through chemical modifications for FO membrane fabrication are highlighted. This review may provide new insights into the future advancement of both novel membrane materials and FO membranes.

Nanoporous ionic organic networks: from synthesis to materials applications

This review highlights the recent progress made in the study of the synthesis of nanoporous ionic organic networks (NIONs) and their promising applications.

In situ growth of biocidal AgCl crystals in the top layer of asymmetric polytriazole membranes

Scalable fabrication strategies to concentrate biocidal materials in only the surface of membranes are highly desirable.

Phosphoric acid doped imidazolium silane crosslinked poly(epichlorihydrin)/PTFE as high temperature proton exchange membranes

Phosphoric acid doped novel high temperature proton exchange membranes based on the imidazolium functionalized poly(epichlorohydrin) and porous polyetrafluoroethylene were fabricated and investigated.

Hydroxyl functionalized polytriazole-co-polyoxadiazole as substrates for forward osmosis membranes

Hydroxyl functionalized polytriazole-co-polyoxadiazole (PTA-POD) copolymers have been synthesized and cast as promising highly thermally stable, chemically resistant, and antiorganic/biological fouling porous substrates for the fabrication of thin-film composite (TFC) forward osmosis (FO) membranes. The roles of PTA/POD ratios in the membrane substrates, TFC layers, and FO membrane performance have been investigated. This study demonstrates that the substrate fabricated from the copolymer containing 40 mol % PTA is optimal for the TFC membranes. Compared to the POD-TFC membrane, the 40 mol % PTA-TFC membrane exhibits a remarkable decrease in structural parameter (S) of more than 3.3 times. In addition, the 40 mol % PTA-TFC membrane is characterized by high water fluxes of 24.9 LMH and 47.2 LMH using 1 M NaCl as the draw solution and DI water as the feed under FO and pressure retarded osmosis (PRO) modes, respectively. Compared to a polysulfone (PSU) supported TFC-FO membrane under similar fabrication conditions, the 40% mol PTA-TFC membrane shows better FO performance and enhanced antifouling properties on the support (lower protein binding propensity and improved bacterial inhibition). Moreover, the performance of the 40 mol % PTA supported TFC-FO membrane can be improved to 37.5 LMH (FO mode)/78.4 LMH (PRO mode) and potentially higher by optimizing the support morphology, the TFC formation, and the post-treatment process. Hence, the use of newly developed hydroxyl functionalized polytriazole-co-polyoxadiazole copolymers may open up a new class of material for FO processes.