Value-Added Products from Coffee Waste: A Review

Coffee waste is often viewed as a problem, but it can be converted into value-added products if managed with clean technologies and long-term waste management strategies. Several compounds, including lipids, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, carotenoids, flavonoids, and biofuel can be extracted or produced through recycling, recovery, or energy valorization. In this review, we will discuss the potential uses of by-products generated from the waste derived from coffee production, including coffee leaves and flowers from cultivation; coffee pulps, husks, and silverskin from coffee processing; and spent coffee grounds (SCGs) from post-consumption. The full utilization of these coffee by-products can be achieved by establishing suitable infrastructure and building networks between scientists, business organizations, and policymakers, thus reducing the economic and environmental burdens of coffee processing in a sustainable manner.

Adsorptive Optimization of Crystal Violet Dye Using Central Composite Rotatable Design and Response Surface Methodology: Statistical Analysis, Kinetic and Isotherm Studies

Water contamination is emerging as the most critical global issues in the world, calling for the treatment eco-techniques. Taking advantage of biowastes as adsorbent materials is not only in accordance with the purpose of environmental protection but also enhance the higher value-added products. In this work, water hyacinth (Eichhornia crassipes) powder was used as an efficient adsorbent for the removal of crystal violet from aqueous solutions. The structure of water hyacinth powder adsorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy analysis. Based on the central composite rotatable design and response surface methodology, the effect of different parameters such as initial pH solution, contact time, adsorbent dosage, and initial crystal violet concentration was optimized. The maximum adsorption capacity of 180.336 mg/g was achieved under the optimum condition as initial pH solution of 6.246, contact time of 125.698 min, the adsorbent dosage of 1.382 g/L, and initial dye concentration of 615.865 mg/L. Moreover, the Langmuir isotherm provided the best fit with a high correlation coefficient of 0.9981 and a maximum monolayer adsorption capacity of 181.818 mg/g at 30 °C. The kinetic studies indicated that the pseudo-second-order model was adequately applied for the adsorption kinetic of crystal violet on the water hyacinth powder adsorbent. The utilization of the water hyacinth plant, an abundant species, as a low-cost biosorbent to remove crystal violet using the central composite rotatable design combined with response surface methodology approach is recommended for the real treatment of organic dyes.

Optimization and characterization of alkaliphilic lipase from a novel Bacillus cereus NC7401 strain isolated from diesel fuel polluted soil

Five Bacillus cereus strains including B. cereus AVP12, B. cereus NC7401, B. cereus BDBCO1, B. cereus JF70 and B. specie JL47 isolated from the diesel fuel polluted soil adhered to the roots of Tagetes minuta were screened for lipase production with phenol red agar method. B. cereus NC7401 strain successfully expressing and secreting lipase with maximal lipolytic activity was subjected to a submerged fermentation process with five different carbon (starch, glucose, maltose, fructose, and lactose) and five different nitrogen (tryptone, ammonium nitrate, peptone, urea, yeast extract) sources to produce lipase enzyme. Maximum enzyme activity was found with starch (30.6 UmL-1), maltose (40 UmL-1), and tryptone (38.6 UmL-1), and the lipases produced using these sources were named lipase A, B, and C respectively. The total protein content of 8.56, 8.86, and 2.75 μg mL-1 were obtained from B. cereus NC7401 cultured using starch, maltose, and tryptone respectively. Lipase was stable between temperature range 30–80°C and pH 5–10 whereas optimally active at 55°C and pH 8.0. The enzyme was relatively stable for 10 days at 4°C and its optimum reaction time with the substrate was 30 minutes. It was tolerant to 1.5% (v/v) methanol as an organic solvent, 1.5% (v/v) Triton X-100 as a media additive and 1.5% (w/v) Ni2+ as a metal ion. SDS, n-hexane, and Ag+ inhibited lipolytic activity. Oil stains were removed from cotton fabric which showed oil removal efficiency enhancement in the presence of a lipase. Fat hydrolysis of 20, 24, and 30% was achieved following 6 hours of incubation of the fat particles with lipase A, B, and C respectively at a concentration of 20 mg mL-1. To as best of our knowledge, this study on lipases extracted from bacteria of Azad Kashmir, Pakistan origin has never been reported before.

Production and purification of laccase by Bacillus sp. using millet husks and its pesticide degradation application

Lignocellulosic agricultural bi-products, pearl millet (PM) and finger millet (FM) husks, were used for the production of laccase using Bacillus sp. PS under solid-state fermentation (SSF). Abiotic variables such as substrate (PM, FM) concentration (1-5%), incubation time (24-96 h) and pH (5-10) were optimized using Response surface methodology (RSM) to maximize the laccase production. The predicted model showed maximum laccase activity of 402 U/mL appearing after 96 h of incubation with PM 2.0 g/L and FM 1.5 g/L at pH 7.0. Single protein band on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) confirmed homogeneity of the laccase with a molecular weight of 63-75 kDa. The partially purified laccase effectively degraded the pesticides (Tricel, 71.8 ± 3.5 and Phoskill 77.3 ± 3.4%) within 5 days of incubation (40 °C) in pH 7.0. The pesticide degradation was further confirmed by high-performance liquid chromatography (HPLC) and the chromatograms showed the single dominant peaks at retention time 2.482 (tricel) and 2.608 (phoskill) min, respectively. Pesticide-degrading laccase was produced by Bacillus sp. PS under SSF reveals the utilization of low-cost bi-substrates for enhanced laccase production.

Process optimization of biogas energy production from cow dung with alkali pre-treated coffee pulp

Biogas production from cow dung with co-substrate agricultural waste is one of the most demanding technologies for generating energy in a sustainable approach considering eco-friendly. In the present study, coffee pulp (CP) was pre-treated with 1% NaOH and combined with various proportions of cow dung (CD) to explore its biogas producing potentiality. The optimization of the process was studied using Response surface methodology. Statistics based on 3-D plots were generated to evaluate the changes in the response surface and to understand the relationship between the biogas yield and other parameters. The highest methane production (144 mL/kg) was achieved after 90 h of incubation with 1:3 of CP and CD at 40 °C. Gas chromatography analyzes the chemical compositions of the generated biogas and its post combustion emissions. The chemical composition of the substrates before digestion and after fermentation (biogas spent sludge) were measured in terms of fiber content and the values were noted as, total solids (0.53%), ash content (9.2%), volatile fatty acid (100 mg/L), organic carbon (46%) and a total carbohydrate (179 mg/g). The results of the optimization of biogas production presented in this work found to have significance with the process parameters. The outcome of the study has supported the fact of conventional combustion technology that has to be upgraded to prevent these hazardous emissions into the atmosphere.

Design and composition of synthetic fungal-bacterial microbial consortia that improve lignocellulolytic enzyme activity

Microbial interactions are important for metabolism as they can improve or reduce metabolic efficiency. To improve lignocellulolytic enzyme activity, a series of synergistic microbial consortia of increasing diversity and complexity were devised using fungal strains, including Trichoderma reesei, Penicillium decumbens, Aspergillus tubingensis, and Aspergillus niger. However, when a screened microbial community with cellulolytic capacity was added to the consortia to increase the number of strains, it engendered more microbial interactions with the above strains and universally improved the β-glucosidase activity of the consortia. Analysis of the microbial community structure revealed that the bacteria in the consortia are more important for lignocellulolytic enzyme activity than the fungi. One fungal and 16 bacterial genera in the consortia may interact with T. reesei and are potential members of a devised synergistic microbial consortium. Such devised microbial consortia may potentially be applied to effectively and economically degrade lignocellulose.

Optimization of protease production from surface-modified coffee pulp waste and corncobs using Bacillus sp. by SSF

The aim of the study was to identify new sources of substrate from agro-industrial waste for protease production using Bacillus sp., a local bacteria isolated from an agro-waste dumping site. The strain was identified as Bacillus sp. BT MASC 3 by 16S rRNA sequence followed by phylogenic analysis. Response surface methodology-based Box-Behnken design (BBD) was used to optimize the variables such as pH, incubation time, coffee pulp waste (CPW) and corncob (CC) substrate concentration. The BBD design showed a reasonable adjustment of the quadratic model with the experimental data. Statistics-based contour and 3-D plots were generated to evaluate the changes in the response surface and understand the relationship between the culture conditions and the enzyme yield. The maximum yield of protease production (920 U/mL) was achieved after 60 h of incubation with 3.0 g/L of CPW and 2.0 g/L of CC at pH 8 and temperature 37 °C in this study. The molecular mass of the purified enzyme was 46 kDa. The highest activity was obtained at 50 °C and pH 9 for the purified enzymes.

Impact of an organic formulation (panchakavya) on the bioleaching of copper and lead in contaminated mine soil

The study was aimed to evaluate the potential of organic formulation, panchakavya, for enhancing the biological leaching of Pb and Cu in contaminated mine soil. Response surface methodology based Box-Behnken design was used to optimize the variables such as incubation time, panchakavya concentration, and agitation rate. The maximum bioleaching (Pb=64% and Cu=49%) was observed after 54 h of incubation with 10 mL panchakavya at 120 rpm. Statistics-based contour and three-dimensional plots were generated to understand the relationship between Pb and Cu bioleaching and variables. High-performance liquid chromatography analysis showed the presence of lactic (25.88 mg g(-1)), citric (0.14 mg g(-1)), succinic (0.14 mg g(-1)), malic (0.66 mg g(-1)), and acetic (0.44 mg g(-1)) acids in panchakavya, which may have a vital role in the removal of metals from the contaminated soil. Soil fraction studies indicate a significant increase of Pb (45%) in the exchangeable fraction of panchakavya-treated soil. XRD studies confirmed the role of panchakavya induced calcite and other minerals in the precipitation of metal ions. A significant increase in the enzyme activities of phosphatase, dehydrogenase, urease, amylase, invertase, and cellulase were observed in the panchakavya-treated soil.

An unique solvent assisted ‘green’ hydrotropic precipitation and response surface optimization for isolation of the dietary micronutrient β-sitosterol-d-glucopyranoside from Desmostachya bipinnata

Novel Box–Behnken optimized isolation of the dietary micronutrient β-sitosterol-d-glucopyranoside by solvent assisted ‘green’ hydrotropic precipitation from Desmostachya bipinnata.

Box–Behnken designed adsorption based elution – unique separation process for commercially important acetyl shikonin from Arnebia nobilis

Box–Behnken optimized, adsorption based robust separation technique for acetyl shikonin (AS), a commercially important compound from industrial crop Arnebia nobilis.