Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

Catechol-Based Antimicrobial Polymers

Catechol is a key constituent in mussel adhesive proteins and is responsible for strong adhesive property and crosslinking formation. Plant-based polyphenols are also capable of chemical interactions similar to those of catechol and are inherently antimicrobial. This review reports a series of catechol-based antimicrobial polymers classified according to their antimicrobial mechanisms. Catechol is utilized as a surface anchoring group for adhering monomers and polymers of known antimicrobial properties onto various types of surfaces. Additionally, catechol's ability to form strong complexes with metal ions and nanoparticles was utilized to sequester these antimicrobial agents into coatings and polymer matrices. During catechol oxidation, reactive oxygen species (ROS) is generated as a byproduct, and the use of the generated ROS for antimicrobial applications was also introduced. Finally, polymers that utilized the innate antimicrobial property of halogenated catechols and polyphenols were reviewed.

Molecular self-assembly of copolymer from renewable phenols: new class of antimicrobial ointment base

Ointments are highly viscous forms intended for external applications either medicated or non-medicated means. Formulation of ointment depends upon the base ingredients to measure the viscosity difference. Several limitations of ointment bases has been encountered timely as agglomeration, oil phase ingredients can form lumps, poor dispersion, poor drug delivery efficiency, make stained, immiscible, and difficult to wash off. Therefore, it is necessary to make a new type of ointment bases that can overcome those limitations. This review summarizes a new type of ointment base preparation from the copolymer of renewable phenolic derivatives. The nanohydrogel preparation from these copolymers are especially effortless and highly efficient in drug delivery, exhibited versatile biological activities such as antioxidant, anti-inflammatory and wound healing in addition to antimicrobial property. Molecular self-assembly mechanisms have been addressed for nanogel formulation. The strategy makes a significant value in health-care application and be supposed to come marketed soon.

Sulfonated Poly(Arylene Ether Sulfone) and Perfluorosulfonic Acid Composite Membranes Containing Perfluoropolyether Grafted Graphene Oxide for Polymer Electrolyte Membrane Fuel Cell Applications

Sulfonated poly(arylene ether sulfone) (SPAES) and perfluorosulfonic acid (PFSA) composite membranes were prepared using perfluoropolyether grafted graphene oxide (PFPE-GO) as a reinforcing filler for polymer electrolyte membrane fuel cell (PEMFC) applications. PFPE-GO was obtained by grafting poly(hexafluoropropylene oxide) having a carboxylic acid end group onto the surface of GO via ring opening reaction between the carboxylic acid group in poly(hexafluoropropylene oxide) and the epoxide groups in GO, using 4-dimethylaminopyridine as a base catalyst. Both SPAES and PFSA composite membranes containing PFPE-GO showed much improved mechanical strength and dimensional stability, compared to each linear SPAES and PFSA membrane, respectively. The enhanced mechanical strength and dimensional stability of composite membranes can be ascribed to the homogeneous dispersion of rigid conjugated carbon units in GO through the increased interfacial interactions between PFPE-GO and SPAES/PFSA matrices.

Cardanol-based polymer latex by radical aqueous miniemulsion polymerization

The facile one-pot, two-step synthesis of a new bio-sourced monomer derived from cardanol and its radical aqueous miniemulsion polymerization are presented.

Antibacterial and biocompatible ABA-triblock copolymers containing perfluoropolyether and plant-based cardanol for versatile coating applications

ABA-triblock copolymers were prepared via ATRP, using modified perfluoropolyether (PFPE) as a macroinitiator (Br–PFPE–Br) to form the B block, and 2-hydroxy-3-cardanylpropyl methacrylate (HCPM) as a monomer to form the A blocks.

Nanostructured coordination complexes/polymers derived from cardanol: “one-pot, two-step” solventless synthesis and characterization

An eco-design of Cardanol and Mn(ii)/Co(ii) based nanostructured CP with octahedral geometry and form micro to nano spheres that self arranged to contour amorphous, layered morphology with desirable antibiofilm activity and high thermal stability.

Mussel-inspired dopamine- and plant-based cardanol-containing polymer coatings for multifunctional filtration membranes

A series of copolymers [PCD#s, where # is the weight percentage of dopamine methacrylamide (DMA) in polymers] containing mussel-inspired hydrophilic dopamine and plant-based hydrophobic cardanol moieties was prepared via radical polymerization using DMA and 2-hydroxy-3-cardanylpropyl methacrylate (HCPM) as the monomers. PCD#s were used as coating materials to prevent flux decline of the membranes caused by the adhesion of biofoulants and oil-foulants. Polysulfone (PSf) ultrafiltration membranes coated with PCD#s showed higher biofouling resistance than the bare PSf membrane, and the bactericidal properties of the membranes increased upon increasing the content of HCPM units in the PCD#s. Serendipitously, the PSf membranes coated with the more or less amphiphilic PCD54 and PCD74, having the optimum amount of both hydrophilic DMA and hydrophobic HCPM moieties, showed noticeably higher oil-fouling resistance than the more hydrophilic PCD91-coated membrane, the more hydrophobic PCD0-coated membrane, and the bare PSf membrane. Therefore, multifunctional coating materials having biofouling- and oil-fouling-resistant and bactericidal properties could be prepared from the monomers containing mussel-inspired dopamine and plant-based cardanol groups.