Polymer-Supported Heterogeneous Fenton Catalysts for the Environmental Remediation of Wastewater

Materials based on polymer hydrogels have demonstrated potential as innovative Fenton catalysts for treating water. However, developing these polymer-supported catalysts with robust stability presents a significant challenge. This paper explores the development and application of polymer-supported heterogeneous Fenton catalysts for the environmental remediation of wastewater, emphasizing the enhancement of metal incorporation into catalysts for improved efficiency. The study begins with an introduction to the heterogeneous Fenton process and its relevance to wastewater treatment. It further delves into the specifics of polymer-supported heterogeneous Fenton catalysts, focusing on iron oxide, copper complexes/nanoparticles, and ruthenium as key components. The synthesis methods employed to prepare these catalysts are discussed, highlighting the innovative approaches to achieve substantial metal incorporation. Operational parameters such as catalyst dosage, pollutant concentration, and the effect of pH on the process efficiency are thoroughly examined. The catalytic performance is evaluated, providing insights into the effectiveness of these catalysts in degrading pollutants. Recent developments in the field are reviewed, showcasing advancements in catalyst design and application. The study also addresses the stability and reusability of polymer-supported heterogeneous Fenton catalysts, critical factors for their practical application in environmental remediation. Environmental applications are explored, demonstrating the potential of these catalysts in addressing various pollutants. The Conclusions offers future perspectives, underlining the ongoing challenges and opportunities in the field, and the importance of further research to enhance the efficacy and sustainability of polymer-supported heterogeneous Fenton catalysts for wastewater treatment.

Highly Efficient Photocatalytic Degradation of Organic Pollutants Using a Polyvinylidene Fluoride/Polyvinylpyrrolidone-Cuprous Oxide Composite Membrane

Enhancing the efficiency of photocatalysts in the removal of organic pollutants is of vital importance in wastewater treatment. In this work, a set of composite membranes that can be used for efficient removal of the organic dyes, such as methyl orange (MO), methylene blue (MB), and Congo red (CR), were prepared through coblending/electrospinning techniques using polyvinylidene fluoride (PVDF) as the substrate, polyvinylpyrrolidone (PVP) as the dispersing agent and wettability regulator, and cuprous oxide (Cu2O) as the photocatalyst. The results showed that Cu2O particles were well encapsulated in the electrospun PVDF/PVP fibers, and the composite membranes exhibited apparently enhanced hydrophilicity. Furthermore, compared with the pure Cu2O particles, the composite membranes not only showed a higher photocatalytic degradation ratio for MO (93.6%) but also showed a much higher degradation rate (62.4 mg/(mg·h)) in comparison with the other reported Cu2O-based composite photocatalytic materials in the literature. In addition, the membrane sample also had excellent recycling stability, and the retention rate of its removal ability maintained 92.1% after 5 times of recycling. Furthermore, the composite membranes also showed high removal ability toward MB and CR, with photocatalytic degradation ratios of 81.4 and 76.1%, respectively. This work indicates that the prepared PVDF/PVP-Cu2O composite membranes possess promising application prospects in wastewater treatment.

White Magnetic Paper with Zero Remanence Based on Electrospun Cellulose Microfibers Doped with Iron Oxide Nanoparticles

The preparation procedure of zero magnetic remanence superparamagnetic white paper by means of three-layer membrane configuration (sandwiched structure) is presented. The cellulose acetate fibrous membranes were prepared by electrospinning. The middle membrane layer was magnetically loaded by impregnation with an aqueous ferrofluid of 8 nm magnetic iron oxide nanoparticles colloidally stabilized with a double layer of oleic acid. The nanoparticles show zero magnetic remanence due to their very small diameters and their soft magnetic properties. Changing the ferrofluid magnetic nanoparticle volume fraction, white papers with zero magnetic remanence and tunable saturation magnetization in the range of 0.5–3.5 emu/g were prepared. The dark coloring of the paper owing to the presence of the black magnetite nanoparticles was concealed by the external layers of pristine white cellulose acetate electrospun fibrous membranes.

Multifunctional Gas and pH Fluorescent Sensors Based on Cellulose Acetate Electrospun Fibers Decorated with Rhodamine B-Functionalised Core-Shell Ferrous Nanoparticles

Ferrous core-shell nanoparticles consisting of a magnetic γ-Fe₂O₃ multi-nanoparticle core and an outer silica shell have been synthesized and covalently functionalized with Rhodamine B (RhB) fluorescent molecules (γ-Fe₂O₃/SiO₂/RhB NPs). The resulting γ-Fe₂O₃/SiO₂/RhB NPs were integrated with a renewable and naturally-abundant cellulose derivative (i.e. cellulose acetate, CA) that was processed in the form of electrospun fibers to yield multifunctional fluorescent fibrous nanocomposites. The encapsulation of the nanoparticles within the fibers and the covalent anchoring of the RhB fluorophore onto the nanoparticle surfaces prevented the fluorophore's leakage from the fibrous mat, enabling thus stable fluorescence-based operation of the developed materials. These materials were further evaluated as dual fluorescent sensors (i.e. ammonia gas and pH sensors), demonstrating consistent response for very high ammonia concentrations (up to 12000 ppm) and fast and linear response in both alkaline and acidic environments. The superparamagnetic nature of embedded nanoparticles provides means of electrospun fibers morphology control by magnetic field-assisted processes and additional means of electromagnetic-based manipulation making possible their use in a wide range of sensing applications.

Fluorescent electrospun PMMA microfiber mats with embedded NaYF4: Yb/Er upconverting nanoparticles

Functional upconverting nanoparticles (UCNPs) can offer new possibilities in fluorescent applications as they exhibit desired characteristic properties like large shift between the fluorescent emission signal and the infrared excitation wavelength, multi- and narrow-band absorption and emission in visible and near infrared - Vis/NIR, together with excellent photostability and low toxicity as opposed to semiconducting quantum dots. The upconversion luminescence emission or quenching characteristics of UCNPs can be altered upon exposure to physical or chemical environmental factors providing thus a functionality that can be utilized for sensing or imaging. Furthermore their functionalization with suitable indicator dyes or recognition elements can extend the range of luminescence response and ratiometric sensing to specific analytes. Synergistically, electrospun nano- and microfibers offering large surface area can enhance the functionality of UCNPs by retaining the fluorescence efficiency and improving the overall responsivity due to dramatically increased surface. For the optimization of this hybrid material system the controllable incorporation of UCNPs is required especially at increased concentration conditions needed for high brightness. Herein, we report the fabrication, morphological and optical characterization of electrospun polymer-based nanocomposite fibers, consisting of poly(methyl methacrylate) (PMMA) and upconverting lanthanide doped nanoparticles of the type NaYF₄ : 20% Yb³⁺/2% Er³⁺ @ NaYF₄. Morphological studies regarding the uniformity and aggregation effects of the UCNP inclusion within the fibers have been implemented followed by upconversion emission characterization by pulsed near-infrared excitation. The study and optimization of such nanocomposite fibrous systems could provide useful insights for the development of efficient upconverting electrospun fiber mats for a number of imaging and sensing applications.

A non-enzymatic glucose sensor based on electrospun 3-D copper oxide micro-nanofiber network films using carboxylic-functionalized poly(arylene ether ketone)s as templates

3-D network films of rope-like CuO-MNFs with high surface-to-volume ratio were prepared. The product is a promising electrode material for fabrication of amperometric enzymeless glucose sensors.

Electrospun porous hybrid CuO/CdO nanofibers using carboxylic-functionalized poly(arylene ether ketone)s as a template for glucose determination

As a high performance polymer, PCA-poly(arylene ether ketone) (PAEK) was first used as a template to fabricate hybrid copper oxide (CuO)/cadmium oxide (CdO) nanofibers (NFs) via electrospinning and subsequent calcination. Porous NFs with a mean diameter of 463 nm were obtained. The formation of morphology was decided by the ion exchange reaction between the functional groups on polymer template and metal ions, which was proved by Fourier transform infrared spectra. Energy-dispersive X-ray spectrometer and X-ray powder diffractometry spectra demonstrated the obtained substance was CuO/CdO compound. The products were then investigated in detail for direct electrocatalytic oxidation of glucose, which was evaluated by cyclic voltammetry and chronoamperometry. Results revealed a similar anti-interference, higher sensitive, and faster response of glucose than the fibers produced from traditional template at +0.40 V. The improved performances were ascribed to the porous morphology which increased the surface-to-volume ratio. The porous morphology was found to be decided by the immobilization of metal ions onto PCA-PAEK. In conclusion, the functional group on PCA-PAEK side chain was the decisive factor to prepare CuO/CdO NFs with special morphology and good electrooxidation performances.

Fabrication of a conjugated microporous polymer membrane and its application for membrane catalysis

A flexible and free standing conjugated microporous polymer (CMP) membrane was prepared using a polyvinylpyrrolidone (PVP) electrospun membrane as a template. The PVP nanofibers of the template membrane were coated with a thin layer of the CMP through the in situ Sonogashira-Hagihara coupling reaction of 1,3,5-triethynylbenzene and 1,4-diiodobenzene. The PVP nanofibers were removed by the solvent extraction to produce the CMP membrane, which retained the entangled fibrous structure of the template membrane. Each fiber showed a hollow tubular structure having a CMP wall with a thickness of tens of nanometers. The microporous polymer membrane exhibited a high BET surface area with hierarchical porosity and good permeability. As a catalytic CMP membrane, the Ag nanoparticle-immobilized microporous polymer membrane was fabricated using an electrospun PVP@Ag membrane as a template. After being coated with the CMP, the PVP nanofibers were removed by the solvent extraction, but the Ag nanoparticles were trapped in the microporous polymer shell. The catalytic CMP membrane was successfully used for the catalytic reduction reaction of 4-nitrophenol. The hollow tubular structure and hierarchical porosity of the membrane allowed for the reactants to easily penetrate into the CMP wall and to contact the Ag nanoparticles, resulting in the high catalytic activity.

Evaluation of PVP/Au Nanocomposite Fibers as Heterogeneous Catalysts in Indole Synthesis

Electrospun nanocomposite fibers consisting of crosslinked polyvinylpyrrolidone (PVP) chains and gold nanoparticles (Au NPs) were fabricated, starting from highly stable PVP/Au NP colloidal solutions with different NP loadings, followed by thermal treatment. Information on the morphological characteristics of the fibers and of the embedded Au NPs was obtained by electron microscopy. Cylindrical, bead-free fibers were visualized by Scanning Electron Microscopy (SEM) while Transmission Electron Microscopy (TEM) and Energy Diffraction X-ray (EDX) analysis supported the presence of Au NPs within the fibers and gave information on their morphologies and average diameters. These materials were briefly evaluated as heterogeneous catalytic supports for the gold-catalyzed intramolecular cyclisation of 2‑(phenylethynyl)aniline to form 2-phenyl-1H-indole. The performance of the gold catalyst was strongly dependent on the Au NP size, with the system containing the smallest Au NPs being the more effective. Moreover, a slight drop of their catalytic efficiency was observed after three consecutive reaction runs, which was attributed to morphological changes as a consequence of fiber merging.

Recent Advances in Recoverable Systems for the Copper-Catalyzed Azide-Alkyne Cycloaddition Reaction (CuAAC)

The explosively-growing applications of the Cu-catalyzed Huisgen 1,3-dipolar cycloaddition reaction between organic azides and alkynes (CuAAC) have stimulated an impressive number of reports, in the last years, focusing on recoverable variants of the homogeneous or quasi-homogeneous catalysts. Recent advances in the field are reviewed, with particular emphasis on systems immobilized onto polymeric organic or inorganic supports.

Electrospun functionalized polyacrylonitrile–chitosan Bi-layer membranes for water filtration applications

The demand for clean drinking water is fundamental for human life and it has sparked immense interest in production of highly efficient filtration devices which employ advanced functional nanosized materials such as nanofibers.

Low temperature and cost-effective growth of vertically aligned carbon nanofibers using spin-coated polymer-stabilized palladium nanocatalysts

We describe a fast and cost-effective process for the growth of carbon nanofibers (CNFs) at a temperature compatible with complementary metal oxide semiconductor technology, using highly stable polymer-Pd nanohybrid colloidal solutions of palladium catalyst nanoparticles (NPs). Two polymer-Pd nanohybrids, namely poly(lauryl methacrylate)-block-poly((2-acetoacetoxy)ethyl methacrylate)/Pd (LauMA x -b-AEMA y /Pd) and polyvinylpyrrolidone/Pd were prepared in organic solvents and spin-coated onto silicon substrates. Subsequently, vertically aligned CNFs were grown on these NPs by plasma enhanced chemical vapor deposition at different temperatures. The electrical properties of the grown CNFs were evaluated using an electrochemical method, commonly used for the characterization of supercapacitors. The results show that the polymer-Pd nanohybrid solutions offer the optimum size range of palladium catalyst NPs enabling the growth of CNFs at temperatures as low as 350 °C. Furthermore, the CNFs grown at such a low temperature are vertically aligned similar to the CNFs grown at 550 °C. Finally the capacitive behavior of these CNFs was similar to that of the CNFs grown at high temperature assuring the same electrical properties thus enabling their usage in different applications such as on-chip capacitors, interconnects, thermal heat sink and energy storage solutions.

Alignment of electrospun polymer fibers using a concave collector

We present a simple concept for producing electrospun aligned polymer fibers based on the use of a static concave collector. Alignment quantification with a Fourier transform method showed an up to 70% fiber alignment in the collector's center area.