The immune-stealth polymeric coating on drug delivery nanocarriers: In vitro engineering and in vivo fate

Although essential nanosystems such as nanoparticles and nanocarriers are desirable options for transporting various drug molecules into the biological environment, they rapidly remove from the circulatory system due to their interaction with multiple in vivo barriers, especially the immune barrier, which will result in their short-term effects. In order to improve their effectiveness and durability in the circulatory system, the polymer coatings can use to cover the surface of nanoparticles and nanocarriers to conceal them from the immune system. Due to their different properties (like charge, elasticity, and hydrophilicity/hydrophobicity), these coatings can improve drug delivery nanosystem durability and therapeutic applications. The mentioned coatings have different types and are divided into various categories, such as synthetic polymers, polysaccharides, and zwitterionic polymers. Each of these polymers has unique properties based on its category, origin, and chemical structure that make them suitable for producing stealth drug delivery nanocarriers. In this review article, we have tried to explain the importance of these diverse polymer coatings in determining the fate of drug nanocarriers and then introduced the different types of these coatings and, finally, described various methods that directly and indirectly analyze the nanocoatings to determine the stability of nanoparticles in the body.

The impact of protein corona on the biological behavior of targeting nanomedicines

For successful translation of targeting nanomedicines from bench to bedside, it is vital to address their most common drawbacks namely rapid clearance and off-target accumulation. These complications evidently originate from a phenomenon called "protein corona (PC) formation" around the surface of targeting nanoparticles (NPs) which happens once they encounter the bloodstream and interact with plasma proteins with high collision frequency. This phenomenon endows the targeting nanomedicines with a different biological behavior followed by an unexpected fate, which is usually very different from what we commonly observe in vitro. In addition to the inherent physiochemical properties of NPs, the targeting ligands could also remarkably dictate the amount and type of adsorbed PC. As very limited studies have focused their attention on this particular factor, the present review is tasked to discuss the best simulated environment and latest characterization techniques applied to PC analysis. The effect of PC on the biological behavior of targeting NPs engineered with different targeting moieties is further discussed. Ultimately, the recent progresses in manipulation of nano-bio interfaces to achieve the most favorite therapeutic outcome are highlighted.

Constrained thermoresponsive polymers - new insights into fundamentals and applications

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Protein nanoparticles in drug delivery: animal protein, plant proteins and protein cages, albumin nanoparticles

In this article, we will describe the properties of albumin and its biological functions, types of sources that can be used to produce albumin nanoparticles, methods of producing albumin nanoparticles, its therapeutic applications and the importance of albumin nanoparticles in the production of pharmaceutical formulations. In view of the increasing use of Abraxane and its approval for use in the treatment of several types of cancer and during the final stages of clinical trials for other cancers, to evaluate it and compare its effectiveness with conventional non formulations of chemotherapy Paclitaxel is paid. In this article, we will examine the role and importance of animal proteins in Nano medicine and the various benefits of these biomolecules for the preparation of drug delivery carriers and the characteristics of plant protein Nano carriers and protein Nano cages and their potentials in diagnosis and treatment. Finally, the advantages and disadvantages of protein nanoparticles are mentioned, as well as the methods of production of albumin nanoparticles, its therapeutic applications and the importance of albumin nanoparticles in the production of pharmaceutical formulations.

Biological responses to physicochemical properties of biomaterial surface

Biomedical scientists use chemistry-driven processes found in nature as an inspiration to design biomaterials as promising diagnostic tools, therapeutic solutions, or tissue substitutes. While substantial consideration is devoted to the design and validation of biomaterials, the nature of their interactions with the surrounding biological microenvironment is commonly neglected. This gap of knowledge could be owing to our poor understanding of biochemical signaling pathways, lack of reliable techniques for designing biomaterials with optimal physicochemical properties, and/or poor stability of biomaterial properties after implantation. The success of host responses to biomaterials, known as biocompatibility, depends on chemical principles as the root of both cell signaling pathways in the body and how the biomaterial surface is designed. Most of the current review papers have discussed chemical engineering and biological principles of designing biomaterials as separate topics, which has resulted in neglecting the main role of chemistry in this field. In this review, we discuss biocompatibility in the context of chemistry, what it is and how to assess it, while describing contributions from both biochemical cues and biomaterials as well as the means of harmonizing them. We address both biochemical signal-transduction pathways and engineering principles of designing a biomaterial with an emphasis on its surface physicochemistry. As we aim to show the role of chemistry in the crosstalk between the surface physicochemical properties and body responses, we concisely highlight the main biochemical signal-transduction pathways involved in the biocompatibility complex. Finally, we discuss the progress and challenges associated with the current strategies used for improving the chemical and physical interactions between cells and biomaterial surface.

Recent advances in the analysis of nanoparticle-protein coronas

In spite of radical advances in nanobiotechnology, the clinical translation of nanoparticle (NP)-based agents is still a major challenge due to various physiological factors that influence their interactions with biological systems. Recent decade witnessed meticulous investigation on protein corona (PC) that is the first surrounds NPs once administered into the body. Formation of PC around NP surface exhibits resilient effects on their circulation, distribution, therapeutic activity, toxicity and other factors. Although enormous literature is available on the role of PC in altering pharmacokinetics and pharmacodynamics of NPs, understanding on its analytical characterization methods still remains shallow. Therefore, the current review summarizes the impact of PC on biological fate of NPs and stressing on analytical methods employed for studying the NP-PC.

Design of Ultra-Thin PEO/PDMAEMA Polymer Coatings for Tunable Protein Adsorption

Protein adsorption on solid surfaces provides either beneficial or adverse outcomes, depending on the application. Therefore, the desire to predict, control, and regulate protein adsorption on different surfaces is a major concern in the field of biomaterials. The most widely used surface modification approach to prevent or limit protein adsorption is based on the use of poly (ethylene oxide) (PEO). On the other hand, the amount of protein adsorbed on poly(2-(dimethylamine)ethyl methacrylate) (PDMAEMA) coatings can be regulated by the pH and ionic strength of the medium. In this work, ultra-thin PEO/PDMAEMA coatings were designed from solutions with different ratios of PEO to PDMAEMA, and different molar masses of PEO, to reversibly adsorb and desorb human serum albumin (HSA), human fibrinogen (Fb), lysozyme (Lys), and avidine (Av), four very different proteins in terms of size, shape, and isoelectric points. X-ray photoelectron spectroscopy (XPS), quartz crystal microbalance (QCM), and atomic force microscopy (AFM) were used to characterize the mixed polymer coatings, revealing the presence of both polymers in the layers, in variable proportions according to the chosen parameters. Protein adsorption at pH 7.4 and salt concentrations of 10-3 M was monitored by QCM. Lys and Av did not adsorb on the homo-coatings and the mixed coatings. The amount of HSA and Fb adsorbed decreased with increasing the PEO ratio or its molar mass in a grafting solution. It was demonstrated that HSA and Fb, which were adsorbed at pH 7.4 and at an ionic strength of 10-3 M, can be fully desorbed by rinsing with a sodium chloride solution at pH 9.0 and ionic strength 0.15 M from the mixed PEO5/PDMAEMA coatings with PEO/PDMAEMA mass ratios of 70/30, and 50/50, respectively. The results demonstrate that mixed PEO/PDMAEMA coatings allow protein adsorption to be finely tuned on solid surfaces.

Enzymatically Degassed Surface-Initiated Atom Transfer Radical Polymerization with Real-Time Monitoring

Polymer brush coatings are frequently prepared by radical polymerization, a notoriously oxygen sensitive process. Glucose oxidase (GOx) can inexpensively enable radical polymerization in solution by enzymatically consuming oxygen as it oxidizes glucose. Here, we report the growth of polymeric brushes using GOx-assisted atom transfer radical polymerization (ATRP) from a surface while open to air. Specifically, we grew a set of biomedically relevant polymer brushes, including poly(oligo(ethylene glycol) methacrylate) (POEGMA), poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), poly(sulfobetaine methacrylate) (PSBMA), and poly(2-(methylsulfinyl)ethyl acrylate (PMSEA). For each of these polymers, we monitored GOx-assisted and GOx-free ATRP reaction kinetics in real time using quartz crystal microbalance (QCM) and verified findings with localized surface plasmon resonance (LSPR). We modeled brush growth kinetics considering bimolecular termination. This model fit our data well ( r² > 0.987 for all samples) and shows the addition of GOx increased effective kinetic chain lengths, propagation rates, and reproducibility. We tested the antifouling properties of the polymer brush coatings against human blood plasma and were surprised to find that coatings prepared with GOx repelled more plasma proteins in all cases than their GOx-free counterparts.

Biomimetic Lubrication and Surface Interactions of Dopamine-Assisted Zwitterionic Polyelectrolyte Coatings

A bioinspired zwitterionic polyelectrolyte coating with excellent hydration ability has been regarded as a promising lubricating candidate for modifying artificial joint cartilage surface. In physiological fluids, the ubiquitous proteins play an important role in achieving outstanding boundary lubrication; however, a comprehensive understanding of the hydration lubrication between polyelectrolyte coatings and proteins still remains unclear. In this work, a facile fabrication of ultrasmooth polyelectrolyte coatings was developed via codeposition of synthesized poly(dopamine methacrylamide- co-2-methacryloyloxyethyl phosphorylcholine) (P(DMA- co-MPC)) and dopamine (DA) in a mild condition. Upon optimization of the feeding ratio of P(DMA- co-MPC) and DA, the as-fabricated PDA/P(DMA- co-MPC) coatings exhibit excellent lubricating properties when sliding with each other (friction coefficient μ = 0.036 ± 0.002, ∼2.8 MPa), as well as sliding with a model protein (bovine serum albumin (BSA)) layer (μ = 0.041 ± 0.005, ∼4.8 MPa) in phosphate-buffered saline (PBS, pH 7.4). Intriguingly, the lubrication in both systems shows Amontons-like behaviors: the friction is directly proportional to the applied load but independent of the shear velocity. Moreover, the PDA/P(DMA- co-MPC) coatings could resist the protein fouling (i.e., BSA) in PBS, which is crucial to prevent the surfaces from being contaminated when applied in biological media, thus maintaining their lubricating properties. Our results provide a versatile approach for facilely fabricating polyelectrolyte coatings with superior lubrication properties to both polyelectrolyte coatings and protein surfaces, with useful implications into the development of novel lubricating coatings for bioengineering applications (e.g., artificial joints).

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

Techniques for the experimental investigation of the protein corona

Due to its enormous relevance the corona formation of adsorbed proteins around nanoparticles is widely investigated. A comparison of different experimental techniques is given. Direct measurements of proteins, such as typically performed with mass spectrometry, will be compared with indirect analysis, in which instead information about the protein corona is gathered from changes in the properties of the nanoparticles. The type of measurement determines also whether before analysis purification from unbound excess proteins is necessary, which may change the equilibrium, or if measurements can be performed in situ without required purification. Pros and contras of the different methods will be discussed.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

pH-Responsive polymers

This review summarizes pH-responsive monomers, polymers and their derivative nano- and micro-structures including micelles, cross-linked micelles, microgels and hydrogels.

Separation of Storage and Loss Modulus of Polyelectrolyte Multilayers on a Nanoscale: A Dynamic AFM Study

Atomic force microscopy (AFM) is used to carry out rheology measurements on the nanoscale and to determine the mechanical properties of poly(l-lysine) (PLL)/hyaluronic acid (HA) multilayer films. Storage (G') and loss modulus (G″) of the films are calculated and compared with the values obtained from quartz crystal microbalance with dissipation monitoring measurements (QCM-D). A predominant elastic behavior independently of the applied frequencies (5-100 Hz) is observed for native HA/PLL films consisting of 36 double layer. If the layers are cross-linked, the value of G' increases by 2 orders of magnitude, while the loss modulus becomes negligible, making these films a purely elastic chemical gel. The values of G' and G'' extracted from QCM-D measurements on native films are much higher, due to the different frequency regime of the applied shear stress. However, the viscoelastic ratio from the two methods is the same and proves the elastic dominated response of the multilayer in both frequency regimes.

Protein separations via thermally responsive ionic block copolymer brush layers

Thermoresponsive materials were prepared via multi-step surface-initiated ATRP. Because of the hydrophobic/hydrophilic transitions in the materials, proteins are adsorbed and eluted by simply changing the column temperature.

Poly(N,N-dimethylaminoethyl methacrylate) Brushes: pH-Dependent Switching Kinetics of a Surface-Grafted Thermoresponsive Polyelectrolyte

The temperature-dependent switching behavior of poly(N,N-dimethylaminoethyl methacrylate) brushes in alkaline, neutral, and acidic solutions is examined. A novel microscopic laser temperature-jump technique is employed in order to study characteristic thermodynamic and kinetic parameters. Static laser micromanipulation experiments allow one to determine the temperature-dependent variation of the swelling ratio. The data reveal a strong shift of the volume phase transition of the polymer brushes to higher temperatures when going from pH = 10 to pH = 4. Dynamic laser micromanipulation experiments offer a temporal resolution on a submillisecond time scale and provide a means to determine the intrinsic rate constants. Both the swelling and the deswelling rates strongly decrease in acidic solutions. Complementary experiments using in situ atomic force microscopy show an increased polymer layer thickness at these conditions. The data are discussed on the basis of pH-dependent structural changes of the polymer brushes including protonation of the amine groups and conformational rearrangements. Generally, repulsive electrostatic interactions and steric effects are assumed to hamper and slow down temperature-induced switching in acidic solutions. This imposes significant restrictions for smart polymer surfaces, sensors, and devices requiring fast response times.

Highly efficient antibacterial surface grafted with a triclosan-decorated poly(N-hydroxyethylacrylamide) brush

This work presented a highly efficient antibacterial Ti-surface which was grafted with poly(N-hydroxyethylacrylamide) (PHEAA) brush and further decorated with triclosan (TCS). The modified surfaces were characterized using contact angle measurements, X-ray photoelectron spectroscopy, and attenuated total reflectance Fourier transform infrared. The antibacterial performance of the modified surfaces was evaluated using the Streptococcus mutans and Actinomyces naeslundii attachment test. The Ti surface with PHEAA brush (Ti-PHEAA) was able to resist the adhesion of the bacteria, while the TCS-decorated Ti surface (Ti-TCS) showed the capability of killing the bacteria adhered on the surface. As we coupled the TCS to the PHEAA brush, the surface showed highly efficient antibacterial performance due to the combination of the resistance to the bacteria adhesion and its activity of killing bacteria.

Thermoresponsive hydrophobic copolymer brushes modified porous monolithic silica for high-resolution bioseparation

Thermoresponsive-hydrophobic copolymer brushes were prepared on porous monolithic silica rods through surface initiated ATRP. The monolithic silica can separate biomolecules with high resolution and in short analysis times.

Protein-resistance performance of amphiphilic copolymer brushes consisting of fluorinated polymers and polyacrylamide grafted from silicon surfaces

A series of random copolymer brushes of acrylamide (AM) and 2-(perfluorinated hexyl)ethyl methacrylate (FMA) were grafted from initiator-functionalized silicon wafers by surface-initiated atom transfer radical polymerization.

Creating surface patterns of polymer brushes by degrafting via tetrabutyl ammonium fluoride

We demonstrate the use of tetrabutyl ammonium fluoride (TBAF) for creating spatial patterns of poly(methyl methacrylate) (PMMA) brushes on a flat silica support by degrafting PMMA grafted chains from selected regions on the substrate.