Electrospun cobalt-doped 2D-MoSe2/polypyrrole hybrid-based carbon nanofibers as electrochemical sensing platforms

A novel cobalt-doped two-dimensional molybdenum diselenide/polypyrrole hybrid-based carbon nanofiber (Co/MoSe2/PPy@CNF) was prepared using the hydrothermal method followed by electrospinning technique. The structural and morphological properties of the 2D-TMD@CNF-based hybrids were characterized through X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), and transmission electron microscopy (TEM). The Co-MoSe2/PPy@CNF exhibited large surface area, porous structure, and improved active sites due to the synergistic effect of the components. The electrochemical and electrocatalytic characteristics of the 2D-TMD@CNF-modified electrodes were also investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The Co/MoSe2/PPy@CNF electrode was used as an electrochemical sensor for simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) and showed enhanced catalytic activity and sensitivity. Using DPV measurements, the Co/MoSe2/PPy@CNF demonstrated wide linear ranges of 30-3212 μM for AA, 1.2-536 μM for DA, and 10-1071 μM for UA with low detection limits of 6.32, 0.45, and 0.81 μM, respectively. The developed sensor with the Co/MoSe2/PPy@CNF-modified electrode was also applied to a human urine sample and gave recoveries ranging from 94.0 to 105.5% (n = 3) for AA, DA, and UA. Furthermore, the Co/MoSe2/PPy@CNF-based sensor exhibited good selectivity and reproducibility for the detection of AA, DA, and UA.

Carbon nanomaterial hybrids via laser writing for high-performance non-enzymatic electrochemical sensors: a critical review

Non-enzymatic electrochemical sensors possess superior stability and affordability in comparison to natural enzyme-based counterparts. A large variety of nanomaterials have been introduced as enzyme mimicking with appreciable sensitivity and detection limit for various analytes of which glucose and H2O2 have been mostly investigated. The nanomaterials made from noble metal, non-noble metal, and metal composites, as well as carbon and their derivatives in various architectures, have been extensively proposed over the past years. Three-dimensional (3D) transducers especially realized from the hybrids of carbon nanomaterials either with metal-based nanocatalysts or heteroatom dopants are favorable owing to low cost, good electrical conductivity, and stability. In this critical review, we evaluate the current strategies to create such nanomaterials to serve as non-enzymatic transducers. Laser writing has emerged as a powerful tool for the next generation of devices owing to their low cost and resultant remarkable performance that are highly attractive to non-enzymatic transducers. So far, only few works have been reported, but in the coming years, more and more research on this topic is foreseeable.

Selective and simultaneous sensing of ascorbic acid, dopamine and uric acid based on nitrogen-doped mesoporous carbon

Development of novel sensing nanostructures for facile, economical and fast applications has attracted more and more interest. Herein, a nitrogen-doped mesoporous carbon (NMC) was synthesized by pyrolyzing a mixture of melamine and carbon black at a low-temperature (600 °C) and exploited for the simultaneous sensing of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The as-made NMC exhibits a rougher surface and smaller size than carbon black. Such a one-pot method is very versatile, quick and inexpensive, easy to handle (solvent-, catalyst-, and template-free) and scalable. The oxidation potentials of the NMC/GCE negatively shift and the current responses are enhanced greatly towards the oxidation of AA, DA and UA thanks to the large surface area, mesoporous structure and N-doped active sites. The peak to peak potential separations are 258 and 410 mV for AA-DA and AA-UA. The linear ranges of AA, DA and UA are 5-4500 μM, 0.005-35 μM and 0.5-3500 μM, respectively, and their detection limits are 0.15 μM (AA), 1.6 nM (DA) and 0.15 μM (UA). Meanwhile, the NMC/GCE exhibits satisfactory stability and anti-interference ability. These results show that NMC could be a promising candidate material for electrochemical sensor construction.

Development of CuAlO2-Encapsulated Reduced Graphene Oxide Nanocomposites: An Efficient and Selective Electrocatalyst for Detection of Neurodegenerative Disorders

Carbon-based nanomaterials continue to simulate wide interest in diverse disciplines including electrochemical biosensors, which have great ability to function as next-generation clinical diagnostics. Motivated by this point, we for the first time developed a CuAlO₂-encapsulated reduced graphene oxide (rGO) nanocomposite by a facile wet-chemical process to modify a glassy carbon electrode for dopamine detection with high selectivity and good sensitivity. The size, shape, phase purity, chemical composition, and surface area were investigated for the samples through transmission electron microscopy, scanning electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and Brunauer-Emmett-Teller analysis. The electrocatalytic performance was studied using cyclic voltammetry and amperometric technique. The modified rGO/CuAlO₂ nanocomposite electrode showed an enhanced electrochemical performance compared to other electrodes and pure CuAlO₂ electrodes due to the strong promoting effect between rGO and CuAlO₂. Both the oxidation current and concentration were proportional and show a linear range of 9.2 × 10^-8 to 1.6 × 10^-7 M having a detection limit of 15 nM at S/N = 3. Further, the biosensor successfully neglected the interference of ascorbic and uric acid and exhibited enhanced selectivity, improved sensitivity, and stability toward dopamine formulations. Most obviously, the real-time analysis of the electrochemical biosensor may be proved using the clinical diagnostics in the near future.

Facile Synthesis of MnO2 Nanoflowers/N-Doped Reduced Graphene Oxide Composite and Its Application for Simultaneous Determination of Dopamine and Uric Acid

This study reports facile synthesis of MnO2 nanoflowers/N-doped reduced graphene oxide (MnO2NFs/NrGO) composite and its application on the simultaneous determination of dopamine (DA) and uric acid (UA). The microstructures, morphologies, and electrochemical performances of MnO2NFs/NrGO were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), respectively. The electrochemical experiments showed that the MnO2NFs/NrGO composites have the largest effective electroactive area and lowest charge transfer resistance. MnO2NFs/NrGO nanocomposites displayed superior catalytic capacity toward the electro-oxidation of DA and UA due to the synergistic effect from MnO2NFs and NrGO. The anodic peak currents of DA and UA increase linearly with their concentrations varying from 0.2 μM to 6.0 μM. However, the anodic peak currents of DA and UA are highly correlated to the Napierian logarithm of their concentrations ranging from 6.0 μM to 100 μM. The detection limits are 0.036 μM and 0.029 μM for DA and UA, respectively. Furthermore, the DA and UA levels of human serum samples were accurately detected by the proposed sensor. Combining with prominent advantages such as facile preparation, good sensitivity, and high selectivity, the proposed MnO2NFs/NrGO nanocomposites have become the most promising candidates for the simultaneous determination of DA and UA from various actual samples.

A ZIF-8 derived nitrogen-doped porous carbon and nitrogen-doped graphene nanocomposite modified electrode for simultaneous determination of ascorbic acid, dopamine and uric acid

Simultaneous electrochemical detection of ascorbic acid, dopamine and uric acid by a nanocomposite modified electrode was realized.

Simultaneous determination of ascorbic acid, dopamine and uric acid by a novel electrochemical sensor based on N2/Ar RF plasma assisted graphene nanosheets/graphene nanoribbons

A novel nitrogen/argon (N₂/Ar) radio frequency (RF) plasma functionalized graphene nanosheet/graphene nanoribbon (GS/GNR) hybrid material (N₂/Ar/GS/GNR) was developed for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Various nitrogen mites introduced into GS/GNR hybrid structure was evidenced by a detailed microscopic, spectroscopic and surface area analysis. Owing to the unique structure and properties originating from the enhanced surface area, nitrogen functional groups and defects introduced on both the basal and edges, N₂/Ar/GS/GNR/GCE showed high electrocatalytic activity for the electrochemical oxidations of AA, DA, and UA with the respective lowest detection limits of 5.3, 2.5 and 5.7 nM and peak-to-peak separation potential (ΔE_P) (vs Ag/AgCl) in DPV of 220, 152 and 372 mV for AA/DA, DA/UA and AA/UA respectively. Moreover, the selectivity, stability, repeatability and excellent performance in real time application of the fabricated N₂/Ar/GS/GNR/GCE electrode suggests that it can be considered as a potential electrode material for simultaneous detection of AA, DA, and UA.

De-bundled single-walled carbon nanotube-modified sensors for simultaneous differential pulse voltammetric determination of ascorbic acid, dopamine, and uric acid

De-bundled SWCNTs modified glassy carbon electrode for the simultaneous differential pulse voltammetric determination of ascorbic acid, dopamine, and uric acid.

CVD graphene as an electrochemical sensing platform for simultaneous detection of biomolecules

The development of electrochemical biosensors for the simultaneous detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), tryptophan (Trp), and nitrite ([Formula: see text]) in human serum is reported in this work. Free-standing graphene nanosheets were fabricated on Ta wire using the chemical vapor deposition (CVD) method. CVD graphene, which here served as a sensing platform, provided a highly sensitive and selective option, with detection limits of AA, DA, UA, Trp, and [Formula: see text] of 1.58, 0.06, 0.09, 0.10, and 6.45 μM (S/N = 3), respectively. The high selectivity of the electrode is here explained by a relationship between the bandgap energy of analyte and the Fermi level of graphene. The high sensitivity in the oxidation current was determined by analyzing the influence of the high surface area and chemical structure of free-standing graphene nanosheets on analyte adsorption capacity. This finding strongly indicates that the CVD graphene electrode can be used as a biosensor to detect five analytes in human serum.

The novel sulfonated polyaniline-decorated carbon nanosphere nanocomposites for electrochemical sensing of dopamine

Herein, a novel dopamine (DA) electrochemical sensor was developed by combining carbon nanospheres (CNSs) and sulfonated polyaniline (SPANI) with their own excellent characteristics.

Novel UIO-66-NO2@XC-72 nanohybrid as an electrode material for simultaneous detection of ascorbic acid, dopamine and uric acid

The UIO-66-NO₂@XC-72 sensor exhibited excellent linear responses to AA, DA and UA due to the synergistic effect of UIO-66-NO₂ and XC-72, as well as the hydrogen bond effect. The detection ranges were 0.2–3.5 μM for AA, 0.03–2.0 μM for DA and 0.75–22 μM for UA.

Carbon nanodots prepared for dopamine and Al(3+) sensing, cellular imaging and logic gate operation

Fluorescent carbon nanodots (CNDs) were synthesized through a facile, economic and green one-step hydrothermal process. The CNDs exhibit various merits including excellent solubility, superior photostability and low toxicity. Besides, the CNDs can be used as an effective fluorescent probe for dopamine and Al(3+). What's more, this CNDs based fluorescent probe was favorably applied to the analyses of dopamine in biological fluids and Al(3+) in food samples. This CDs based sensing platform shows its potential applications in the field of biology and food analysis with extraordinary advantages such as fast and simple as well as environmental-friendly. Inspired by these results, the prepared CNDs can be utilized as logic gates at the molecular level.

Simultaneous determination of dopamine and uric acid in the presence of high ascorbic acid concentration using cetyltrimethylammonium bromide–polyaniline/activated charcoal composite

Simultaneous determination of dopamine and uric acid is described using CTAB–PANI/AC composite and attained detection limits of 0.06 and 0.20 μM, respectively. Practicality is demonstrated in rat brain, injection, serum and urine samples.

A high performance electrochemical biosensor based on Cu2O–carbon dots for selective and sensitive determination of dopamine in human serum

A green and facile method was developed by synthesizing a cuprous oxide–carbon dots/Nafion (Cu₂O–CDs/NF) composite film for highly sensitive and reliable determination of dopamine (DA).

Microfluidic paper analytical device for the chromatographic separation of ascorbic acid and dopamine

Cellulose-based filter papers were used as base materials to construct microfluidic paper-based analytical devices (μPADs) coupling a separation channel with electrochemical detection.