Graphene-based nanomaterials for adsorption of iodinated X-ray contrast media from contaminated water: A comparative study

Iodinated X-ray contrast media (ICM) was frequently detected in the aqueous environment. In this work, the applicability of three graphene-based nanomaterials (graphene nanosheets (GNS), graphene oxide (GO), and reduced graphene oxide (rGO)) for the adsorptive removal of the six ICMs including iohexol, iopamidol, iomeprol, iopromide, iodixanol and ioversol from aqueous solution was firstly evaluated by batch adsorption method. Among the three graphene-based nanomaterials, the GNS displayed the best adsorption performances for the adsorption of the six ICMs. The maximum uptakes of the six ICMs by the GNS (161.5 mg g-1 for iohexol, 267.2 mg g-1 for iodixanol, 197.7 mg g-1 for iopromide, 197.0 mg g-1 for iopamidol, 109.6 mg g-1 for iomeprol, and 168.2 mg g-1 for ioversol) can rapidly achieved within 10 min and indicate no dependence on pH in the range of 4-9. The results obtained from the calculations of isotherms, kinetics and thermodynamic supported the occurrence of a chemisorption of the GNS for the six ICMs. The π-π interactions between benzene ring of the ICMs and the sp2-hybridized two-dimensional sheet of GNS were deemed the predominant adsorption mechanism.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

Iopamidol Abatement from Waters: A Rigorous Approach to Determine Physicochemical Parameters Needed to Scale Up from Batch to Continuous Operation

The abatement of iopamidol (IPM), an X-ray iodinated contrast agent, in aqueous solution using powdered activated carbon (PAC) as a sorbent was investigated in the present work. The material was characterized by various analytical techniques such as thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, dynamic light scattering, and zeta potential measurements. Both thermodynamic and kinetic experiments were conducted in a batch apparatus, and the effects of the initial concentration of IPM, the temperature, and the adsorbent bulk density on the adsorption kinetics were investigated. The adsorption isotherms were interpreted well using the Langmuir model. Moreover, it was demonstrated that IPM adsorption on PAC is spontaneous and exothermic (ΔH0 = -27 kJ mol-1). The adsorption kinetic data were described using a dynamic intraparticle model for fluid-solid adsorption kinetics (ADIM) allowing determination of a surface activation energy Es = 6 ± 1 kJ mol-1. Comparing the experimental results and the model predictions, a good model fit was obtained.

Adsorption of the First-Line Covid Treatment Analgesic onto Activated Carbon from Residual Pods of Erythrina Speciosa

In this study, the residual pods of the forest species Erythrina speciosa were carbonized with ZnCl₂ to obtain porous activated carbon and investigated for the adsorptive removal of the drug paracetamol (PCM) from water. The PCM adsorption onto activated carbon is favored at acidic solution pH. The isothermal studies confirmed that increasing the temperature from 298 to 328 K decreased the adsorption capacity from 65 mg g^-1 to 50.4 mg g^-1 (C₀ = 175 mg L^-1). The Freundlich model showed a better fit of the equilibrium isotherms. Thermodynamic studies confirmed the exothermic nature (ΔH⁰ = -39.1066 kJ mol^-1). Kinetic data indicates that the external mass transfer occurs in the first minutes followed by the surface diffusion, considering that the linear driving force model described the experimental data. The application of the material in the treatment of a simulated effluent with natural conditions was promising, presenting a removal of 76.45%. Therefore, it can be concluded that the application of residual pods of the forest species Erythrina speciosa carbonized with ZnCl₂ is highly efficient in the removal of the drug paracetamol and also in mixtures containing other pharmaceutical substances.

Bottom-Up Synthesis of De-Functionalized and Dispersible Carbon Spheres as Colloidal Adsorbent

Recent innovative adsorption technologies for water purification rely on micrometer-sized activated carbon (AC) for ultrafast adsorption or in situ remediation. In this study, the bottom-up synthesis of tailored activated carbon spheres (aCS) from sucrose as renewable feedstock is demonstrated. The synthesis is based on a hydrothermal carbonization step followed by a targeted thermal activation of the raw material. This preserves its excellent colloid properties, i.e., narrow particle size distribution around 1 µm, ideal spherical shape and excellent aqueous dispersibility. We investigated the ageing of the freshly synthesized, highly de-functionalized AC surface in air and aqueous media under conditions relevant to the practice. A slow but significant ageing due to hydrolysis and oxidation reactions was observed for all carbon samples, leading to an increase of the oxygen contents with storage time. In this study, a tailored aCS product was generated within a single pyrolysis step with 3 vol.-% H₂O in N₂ in order to obtain the desired pore diameters and surface properties. Adsorption characteristics, including sorption isotherms and kinetics, were investigated with monochlorobenzene (MCB) and perfluorooctanoic acid (PFOA) as adsorbates. The product showed high sorption affinities up to log (K_D/[L/kg]) of 7.3 ± 0.1 for MCB and 6.2 ± 0.1 for PFOA, respectively.

Paracetamol and Ibuprofen Removal from Aqueous Phase Using a Ceramic-Derived Activated Carbon

Emerging pollutants, including pharmaceuticals and personal care products, have been detected in surface and groundwaters. The adsorption of paracetamol and ibuprofen, two widespread drugs, has been studied in aqueous medium, using a ceramic-derived carbon (CeDC) and a commercial activated carbon (CoAC). CeDC yielded a BET surface area of 895 m² g^-1, a bimodal pore size distribution (13.2 and 35 nm) and a total pore volume of 1.99 cm³ g^-1. CoAC had an approximate surface area of 1000 m² g^-1, a homogeneous pore size distribution and a total pore volume of 0.42 cm³ g^-1. Kinetic and equilibrium tests were carried out in batch systems to study the materials' sorption performances. The intraparticle diffusion model best fitted the experimental kinetic data. The maximum ibuprofen sorption capacities were 120 mg g^-1 and 133 mg g^-1 for CoAC and CeDC, respectively, whereas no major differences on the maximum paracetamol sorption capacities (qm) were observed among the sorbents (150-159 mg g^-1). Therefore, CeDC, synthesized easily from a ceramic composite, improved time and sorption capacity of paracetamol and ibuprofen compared to the commercial activated carbon, indicating the potential of the developed carbon as an emerging pollutant sorbent material.

Steam Activation of Acid-Chars for Enhanced Textural Properties and Pharmaceuticals Removal

The present work aims to explore steam activation of sisal or glucose-derived acid-chars as an alternative to KOH activation to prepare superactivated carbons, and to assess the adsorption performance of acid-chars and derived activated carbons for pharmaceuticals removal. Acid-chars were prepared from two biomass precursors (sisal and glucose) using various H₂SO₄ concentrations (13.5 M, 12 M, and 9 M) and further steam-activated at increasing burn-off degrees. Selected materials were tested for the removal of ibuprofen and iopamidol from aqueous solution (kinetic and equilibrium assays) in single-solute conditions. Activated carbons prepared from acid-char carbonized with 13.5 M and 12 M H₂SO₄ are mainly microporous solids composed of compact rough particles, yielding a maximum surface area and a total pore volume of 1987 m² g^-1 and 0.96 cm³ g^-1, respectively. Solid state NMR reveals that steam activation increased the aromaticity degree and amount of C=O functionalities. Steam activation improved the acid-chars adsorption capacity for ibuprofen from 20-65 mg g^-1 to higher than 280 mg g^-1, leading to fast adsorption kinetics (15-20 min). The maximum adsorption capacities of selected activated samples for ibuprofen and iopamidol were 323 and 1111 mg g^-1, respectively.

Instructive analysis of engineered carbon materials for potential application in water and wastewater treatment

Water remediation is an essential component for sustainable development. Increasing population and rapid industrialization have contributed to the deterioration of water resources. In particular, effluents from chemical, pharmaceutical, petroleum industries, and anthropogenic activities have led to severe ecological degradation. Many of these detrimental pollutants are highly toxic even at low concentrations, acting as carcinogens and inflicting severe long-lasting effects on human health. This review underscores the potential applications of engineered carbon-based materials for effective wastewater treatment. It focuses on the performance as well as efficiency of activated carbon, graphene nanomaterial, and carbon nanotubes, both with and without chemical functionalization. Plausible mechanisms of action between the chemically functionalized adsorbent and pollutants are also discussed. Based on the keywords from the literature published in the recent five years, a statistical practicality-vs-applicability analysis of these three materials is also provided. The review will provide a deep understanding of the physical or chemical interactions of the wastewater pollutants with carbon materials.

A Review of Caffeine Adsorption Studies onto Various Types of Adsorbents

A systematic literature review of publications from 2000 to 2020 was carried out to identify research trends on adsorbent materials for the removal of caffeine from aqueous solutions. Publications were retrieved from three databases (Scopus, Web of Science, and Google Scholar). Words "adsorption AND caffeine" were examined into titles, abstracts, and keywords. A brief bibliometric analysis was performed with emphasis on the type of publication and of most cited articles. Materials for the removal of caffeine were classified according to the type of material into three main groups: organic, inorganic, and composites, each of them subdivided into different subgroups consistent with their origin or production. Tables resume for each subgroup of adsorbents the key information: specific surface area, dose, pH, maximum adsorption capacity, and isotherm models for the removal of caffeine. The highest adsorption capacities were achieved by organic adsorbents, specifically those with granular activated carbon (1961.3 mg/g) and grape stalk activated carbon (916.7 mg/g). Phenyl-phosphate-based porous organic polymer (301 mg/g), natural sandy loam sediment (221.2 mg/g), composites of MCM-48 encapsulated graphene oxide (153.8 mg/g), and organically modified clay (143.7 mg/g) showed adsorption capacities lower than those of activated carbons. In some activated carbons, a relation between the specific surface area (SSA) and the maximum adsorption capacity (Q max) was found.

Comprehensive review on iodinated X-ray contrast media: Complete fate, occurrence, and formation of disinfection byproducts

Iodinated contrast media (ICM) are drugs which are used in medical examinations for organ imaging purposes. Wastewater treatment plants (WWTPs) have shown incapability to remove ICM, and as a consequence, ICM and their transformation products (TPs) have been detected in environmental waters. ICM show limited biotransformation and low sorption potential. ICM can act as iodine source and can react with commonly used disinfectants such as chlorine in presence of organic matter to yield iodinated disinfection byproducts (IDBPs) which are more cytotoxic and genotoxic than conventionally known disinfection byproducts (DBPs). Even highly efficient advanced treatment systems have failed to completely mineralize ICM, and TPs that are more toxic than parent ICM are produced. This raises issues regarding the efficacy of existing treatment technologies and serious concern over disinfection of ICM containing waters. Realizing this, the current review aims to capture the attention of scientific community on areas of less focus. The review features in depth knowledge regarding complete environmental fate of ICM along with their existing treatment options.

Lignin-Based Porous Supraparticles for Carbon Capture

Multiscale carbon supraparticles (SPs) are synthesized by soft-templating lignin nano- and microbeads bound with cellulose nanofibrils (CNFs). The interparticle connectivity and nanoscale network in the SPs are studied after oxidative thermostabilization of the lignin/CNF constructs. The carbon SPs are formed by controlled sintering during carbonization and develop high mechanical strength (58 N·mm^-3) and surface area (1152 m²·g^-1). Given their features, the carbon SPs offer hierarchical access to adsorption sites that are well suited for CO₂ capture (77 mg CO₂·g^-1), while presenting a relatively low pressure drop (∼33 kPa·m^-1 calculated for a packed fixed-bed column). The introduced lignin-derived SPs address the limitations associated with mass transport (diffusion of adsorbates within channels) and kinetics of systems that are otherwise based on nanoparticles. Moreover, the carbon SPs do not require doping with heteroatoms (as tested for N) for effective CO₂ uptake (at 1 bar CO₂ and 40 °C) and are suitable for regeneration, following multiple adsorption/desorption cycles. Overall, we demonstrate porous SP carbon systems of low cost (precursor, fabrication, and processing) and superior activity (gas sorption and capture).

Recent progress on nanostructured carbon-based counter/back electrodes for high-performance dye-sensitized and perovskite solar cells

Dye-sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) favor minimal environmental impact and low processing costs, factors that have prompted intensive research and development. In both cases, rare, expensive, and less stable metals (Pt and Au) are used as counter/back electrodes; this design increases the overall fabrication cost of commercial DSSC and PSC devices. Therefore, significant attempts have been made to identify possible substitutes. Carbon-based materials seem to be a favorable candidate for DSSCs and PSCs due to their excellent catalytic ability, easy scalability, low cost, and long-term stability. However, different carbon materials, including carbon black, graphene, and carbon nanotubes, among others, have distinct properties, which have a significant role in device efficiency. Herein, we summarize the recent advancement of carbon-based materials and review their synthetic approaches, structure-function relationship, surface modification, heteroatoms/metal/metal oxide incorporation, fabrication process of counter/back electrodes, and their effects on photovoltaic efficiency, based on previous studies. Finally, we highlight the advantages, disadvantages, and design criteria of carbon materials and fabrication challenges that inspire researchers to find low cost, efficient and stable counter/back electrodes for DSSCs and PSCs.

Ibuprofen as an emerging organic contaminant in environment, distribution and remediation

Pharmaceutical and personal care products (PPCPs) are the one of sub-class under emerging organic contaminants (EOCs). Ibuprofen is the world's third most consumable drug. This drug enters into our water system through human pharmaceutical use. It attracts the attention of environmentalist on the basis of risk associated, presence and transformation in the environment. The detection and removal are the two key area where we need to focus. The concentration of such compounds in waterbodies detected through conventional and also by the advanced methods. This review we described the available technologies including chemical, physical and biological methods, etc used the for removal of Ibuprofen. The pure culture based method, mixed culture approach and activated sludge culture approach focused and pathway of degradation of ibuprofen was deciphered by using the various methods of structure determination. The various degradation methods used for Ibuprofen are discussed. The advanced methods coupled with physical, chemical, biological, chemical methods like ozonolysis, oxidation and adsorption, nanotechnology based methods, nanocatalysis and use of nonosensors to detect the presence of small amount in waterbodies can enhance the future degradation of this drug. It is necessary to develop the new detection methods to enhance the detection of such pollutants. With the developments in new detection methods based on GC-MS//MS, HPLC, LC/MS and nanotechnology based sensors makes easier detection of these compounds which can detect even very minute amount with great sensitivity and in less time. Also, the isolation and characterization of more potent microbial strains and nano-photocatalysis will significantly increase the future degradation of such harmful compounds from the environment.

Composites for wastewater purification: A review

The review deals with different kinds of composites which have been used for wastewater treatment. The use of different types of composites ranging from nanocomposites, activated charcoal composites, polymer composites, oxide-based composites, hybrid composites, and biosorbent composites, etc. has been dealt with in detail, and presented as a central source of knowledge. The paper incorporates water purification explicitly via adsorption process, which has proven to be economical and efficient. These composites have been explored for treating or elimination of various hazardous substances like heavy metal species, different classes of colored contaminants (dyes), several organic and inorganic pollutants from wastewater. The composites discussed have successfully eliminated Zn²⁺, Ni²⁺, Cu²⁺, Pb²⁺, Hg, etc. In some instances the removal percentage of the contaminants was almost 100%. The presented data reveals the efficiency of composite materials in wastewater treatment over the conventional singular materials.

Carbon-Based Sorbent Coatings for the Determination of Pharmaceutical Compounds by Bar Adsorptive Microextraction

Thirteen carbon materials comprising commercial activated carbons and lab-made materials (activated carbons, hydrochars, and low-T and high-T activated hydrochars) were assayed as sorbent coatings in bar adsorptive microextration (BAμE) to monitor trace levels of ten common pharmaceutical compounds (PhCs) in environmental water matrices including surface water, seawater, tap water, and wastewater. Polar and nonpolar pharmaceuticals were selected, sulfamethoxazole, triclosan, carbamazepine, diclofenac, mefenamic acid, 17-α-ethinylestradiol, 17-β-estradiol, estrone, gemfibrozil, and clofibric acid, as model compounds to cover distinct therapeutic classes. Despite having a less-developed porosity, data showed that "in-house" prepared low-T activated hydrochars, obtained from carbohydrates and an eutectic salt mixture at low temperature (i.e., 180 °C) and autogenerated pressure, compete with the best commercial activated carbons for this particular application. The combination of a micro and mesopore network with a rich oxygen-based surface chemistry yielding an acidic nature allowed these low-T activated hydrochars to present the best overall recoveries (between 20.9 and 82.4%) for the simultaneous determination of the ten target PhCs with very distinct chemical properties using high performance liquid chromatography-diode array detection (HPLC-DAD).

Evaluation of hydrochar efficiency for simultaneous removal of diclofenac and ibuprofen from aqueous system using surface response methodology

Pharmaceutically active compounds like diclofenac (DFS), ibuprofen (IBP), and other drugs that persist in the environment are listed as emerging contaminants. These escape from normal wastewater treatment plants and find their way to water streams; therefore, alternate treatment processes are needed. Herein, a sorbent material is reported that is prepared through hydrotermal carbonization from dried fruit powder of Zizipus mauritiana L. (HTC-ZM) and applied for simultaneous removal of DFS and IBP. Carbonized material (HTC-ZM) was found as agglomerates of approximately 1 μm particle size with surface area of 1160 m²/g having oxygen functional groups (e.g., COO, O, C=O) on surface. Simultaneous removal of IBP and DFS onto HTC-ZM was studied using response surface methodology with a set of 18 experiments using factors such as pH, amount of sorbent, contact time, and sorbate concentration. Maximum removal efficiency was obtained 88% and 97% for DFS and for IBP, respectively, with adsorption capacity of 2.03 mmol g^-1 for DFS and 2.54 mmol g^-1 for IBP. Kinetics modeling and "mean free energy" values predicted that sorption is mainly governed by physical interactions followed by "pore filling" mechanism for uptake of DFS and IBP.

Using carbonized low-cost materials for removal of chemicals of environmental concern from water

Adsorption on low-cost biochars would increase the affordability and availability of water treatment in, for example, developing countries. The aim of this study was to identify the precursor materials and hydrochar surface properties that yield efficient removal of compounds of environmental concern (CEC). We determined the adsorption kinetics of a mixture containing ten CECs (octhilinone, triclosan, trimethoprim, sulfamethoxasole, ciprofloxacin, diclofenac, paracetamol, diphenhydramine, fluconazole, and bisphenol A) to hydrochars prepared from agricultural waste (including tomato- and olive-press wastes, rice husks, and horse manure). The surface characteristics of the hydrochars were evaluated via diffuse reflectance infrared spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and N2-adsorption. Kinetic adsorption tests revealed that removal efficiencies varied substantially among different materials. Similarly, surface analysis revealed differences among the studied hydrochars and the degree of changes that the materials undergo during carbonization. According to the DRIFTS data, compared with the least efficient adsorbent materials, the most efficient hydrochars underwent more substantial changes during carbonization.

Development and assessment of a functional activated fore-modified bio-hydrochar for amoxicillin removal

A fore-modified method was put forward and hybridized into hydrothermal process with acid, neutral and alkali circumstances. The activated fore-modified bio-hydrochars of feather and cornstalk (AFBF and AFBC) were manufactured. Some thinner carbon layers/smaller micro carbon spheres and much more hydroxyls functional groups were clearly observed in the acid and alkali fore-modified bio-hydrochars (AFBs). Batch experiments were taken to assess the AMOX removal abilities. By contrast, the AFB fore-modified by alkali, has got the most superior adsorbability of 92.87mg/g. Particularly, the BET surface areas of AFBs increased by 155.46% and the adsorbance of AMOX increased as much as 42.92% than traditional bio-hydrochar. Zeta potentials were introduced to illustrate the interactions between adsorbents and adsorbates under different pH. In addition, the powerful chemical adsorptions processes were also demonstrated by kinetics tests. As a result, the fore- modified method was essential in improving the characters of Bio-hydrochars.

Designing micro- and mesoporous carbon networks by chemical activation of organic resins

Carbon xerogels with ultrahigh micro- and mesopore volumes were synthesized from the activation of polymeric resins prepared by sol–gel polycondensation of resorcinol/formaldehyde mixtures in basic medium and subcritical drying. Various activating conditions (e.g., agent, temperature, impregnation conditions) were used and it was found that the textural features of the resulting carbon xerogels are linked to the experimental procedure of the activation reaction to promote the porosity development. The shrinkage and structural collapse of the fragile resins typically obtained upon annealing at high temperatures (during carbonization and/or physical activation) is suppressed when the impregnation of the chemical activating agent is performed under controlled conditions. If the alkaline reagent (either KOH or K₂CO₃) is put in contact with the resin by wet impregnation (liquid/solid); under such conditions, the intimate contact between both compounds allows the formation of microporosity during the activation along with the enlargement and/or preservation of the mesoporosity of the pristine resin. Furthermore, the chemical activation via wet impregnation allows the combination of high surface areas and the preservation (even higher development) of the mesoporosity created during the synthesis of the resin. The effect of the impregnation method was found highly dependent of the reagent and activation temperature, highlighting the possibility to design micro-mesoporous carbon xerogels at low temperatures with a subtle control of the activation conditions.

Colloidal and micro-carbon spheres derived from low-temperature polymerization reactions

Carbon spheres (CSs) have recently attracted major interest due to their new applications, mainly in energy storage and conversion but also in hard-templating, sorption/catalysis processes, and drug delivery systems. This is attributable to their physico-chemical properties, including their tunable morphology (solid, hollow and core-shell), size, surface area/porosity, good electrical conductivity, low external surface-to-volume ratio, high packing density, enhanced mass transport, robust mechanical stability, low cytotoxicity, and excellent biocompatibility. They can be obtained from a wide variety of carbon precursors and methods. This review covers their production by carbonization of polymer spheres from low-temperature polymerization reactions, considered here as below 250°C. This is a very important method because it allows the synthesis of CSs with different morphologies and doped with other elements or chemical compounds. The preparation of polymer spheres by this technique is well documented in the literature, and the objective of this review is to summarize and give an overview of the most significant publications, proposing a novel classification based on the formation mechanism of the polymer spheres. This classification includes the following polymerization processes: emulsion polymerization and its derivatives, seeded emulsion and inverse emulsion polymerization; precipitation polymerization and its derivative, dispersion polymerization; hard-templating; spray-drying; and hydrothermal or solvothermal treatment of carbohydrates and biomass in general. This review also reports on the morphology and surface characteristics of the CSs obtained by different synthetic approaches. The final section of the review describes the current applications of these CSs, notably in energy storage (supercapacitors and rechargeable batteries) and energy conversion (fuel cells and dye-sensitized solar cells). Besides the numerous applications listed above, they are utilized as sacrificial hard templates to prepare single- and multi-shell hollow spheres of metal oxides and other inorganic compounds and filters, as well as in adsorption and catalysis processes, drug delivery systems, and other minority applications (e.g., lubricants, black pigment in e-papers, and microwave absorber).

Scalable preparation of monodisperse micron-sized carbon microspheres and their application in anion-exchange chromatography

Polyacrylic acid sodium (PAAS), which is an anionic water-soluble polymer, is widely utilized as a thickener in the food industry and flocculant in water treatment owing to its high anion density, low cost and nontoxicity.

Activated carbon derived from hydrothermal treatment of sucrose and its air filtration application

Design of an all biodegradable filter paper was achieved with activated carbon derived from sucrose. Full characterization of sucrose hydrochar and activated carbon are described.

Enhanced adsorption of orthophosphate and copper onto hydrochar derived from sewage sludge by KOH activation

Hydrochar, produced by hydrothermal carbonization of sewage sludge, adsorbs orthophosphate to improve effluent quality, recover & reutilize phosphorous and positively impact sewage sludge management.

Biodiesel production waste as promising biomass precursor of reusable activated carbons for caffeine removal

Turning waste into valuable products: K₂CO₃ activation of rapeseed residues from biodiesel industry for the production of new and reusable activated carbons for caffeine removal from water.

Physically (CO2) activated hydrochars from hickory and peanut hull: preparation, characterization, and sorption of methylene blue, lead, copper, and cadmium

CO₂ activation of hydrochar resulted in improved physicochemical properties and greater sorption of various contaminants.

Sucrose-derived activated carbons: electron transfer properties and application as oxygen reduction electrocatalysts

ORR electrocatalysts derived from sugar: activated carbons derived from sucrose showed electrocatalytic activity for the oxygen reduction reaction.

The influence of the textural properties of activated carbons on acetaminophen adsorption at different temperatures

Positive effect of temperature on acetaminophen adsorption is observed for carbons with non-continuous micropore size distribution centered at widths close to the critical dimension of acetaminophen planar form.

Nitrogen- and oxygen-containing activated carbons from sucrose for electrochemical supercapacitor applications

High surface area nitrogen- and oxygen-containing activated carbons have been synthesized from sucrose and ammonium nitrateviacombustion route for supercapacitor applications.