012 facets modulated LDH composite for neurotoxicity risk assessment through direct electrochemical profiling of dopamine

Rising concerns of pesticide-induced neurotoxicity and neurodegenerative diseases like Parkinson's, Alzheimer's, and Multiple Sclerosis, are exacerbated by overexposure to contaminated waterbodies. Therefore, evaluating the risk accurately requires reliable monitoring of related biomarkers like dopamine (DA) through electrochemical detection. Layered double hydroxides (LDHs) have shown great potential in sensors. However, to meet the challenges of rapid detection of large patient cohorts in real-time biological media, they should be further tailored to display superior analytical readouts. Herein, a ternary LDH (Ni2CoMn0.5) was integrated with the sheets of thermally reduced graphene oxide (trGO), to expose more highly active edge planes of the LDH, as opposed to its generally observed inert basal planes. The improvement in detection performance through such a modulated structure-property is a prospect that hasn't been previously explored for any other LDH-based materials employed in sensing applications. The 2 folds superior electrochemical activity exhibited by the face-on oriented LDH with trGO as compared to the pristine LDH material was further employed for direct detection of DA in real blood plasma samples. Moreover, the designed sensor exhibited exceptional selectivity towards the detection of DA with a limit of detection of 34.6 nM for a wide dynamic range of 0.001-5 mM with exceptional stability retaining 88.56% of the initial current even after storage in ambient conditions for 30 days.

Electrochemical sensor based on the synergy between Cucurbit[8]uril and 2D-MoS2 for enhanced melatonin quantification

We present the development of an electrochemical sensor towards melatonin determination based on the synergistic effect between MoS₂ nanosheets and cucurbit[8]uril. For the sensor construction cucurbit[8]uril suspensions were prepared in water, and MoS₂ nanosheets were obtained by liquid exfoliation in ethanol:water. The sensing platform was topographically characterized by Atomic Force Microscopy. Electrochemical Impedance Spectroscopy experiments allowed us to study the charge transfer process during melatonin oxidation. Moreover, stoichiometry of the resulting complex has also been determined. After the optimization of the sensor construction and the experimental variables involved in the Differential Pulse Voltammetric response of melatonin, detection limit of 3.80 × 10^-7 M, relative errors minor than 3.8% and relative standard deviation lower than 4.4% were obtained. The proposed sensor has been successfully applied to melatonin determination in pharmaceutical and biological samples as human urine and serum, with very good recoveries ranging from 90 to 102%.

A review on microfluidic-assisted nanoparticle synthesis, and their applications using multiscale simulation methods

Recent years have witnessed an increased interest in the development of nanoparticles (NPs) owing to their potential use in a wide variety of biomedical applications, including drug delivery, imaging agents, gene therapy, and vaccines, where recently, lipid nanoparticle mRNA-based vaccines were developed to prevent SARS-CoV-2 causing COVID-19. NPs typically fall into two broad categories: organic and inorganic. Organic NPs mainly include lipid-based and polymer-based nanoparticles, such as liposomes, solid lipid nanoparticles, polymersomes, dendrimers, and polymer micelles. Gold and silver NPs, iron oxide NPs, quantum dots, and carbon and silica-based nanomaterials make up the bulk of the inorganic NPs. These NPs are prepared using a variety of top-down and bottom-up approaches. Microfluidics provide an attractive synthesis alternative and is advantageous compared to the conventional bulk methods. The microfluidic mixing-based production methods offer better control in achieving the desired size, morphology, shape, size distribution, and surface properties of the synthesized NPs. The technology also exhibits excellent process repeatability, fast handling, less sample usage, and yields greater encapsulation efficiencies. In this article, we provide a comprehensive review of the microfluidic-based passive and active mixing techniques for NP synthesis, and their latest developments. Additionally, a summary of microfluidic devices used for NP production is presented. Nonetheless, despite significant advancements in the experimental procedures, complete details of a nanoparticle-based system cannot be deduced from the experiments alone, and thus, multiscale computer simulations are utilized to perform systematic investigations. The work also details the most common multiscale simulation methods and their advancements in unveiling critical mechanisms involved in nanoparticle synthesis and the interaction of nanoparticles with other entities, especially in biomedical and therapeutic systems. Finally, an analysis is provided on the challenges in microfluidics related to nanoparticle synthesis and applications, and the future perspectives, such as large-scale NP synthesis, and hybrid formulations and devices.

Advances on Hormones and Steroids Determination: A Review of Voltammetric Methods since 2000

This article presents advances in the electrochemical determination of hormones and steroids since 2000. A wide spectrum of techniques and working electrodes have been involved in the reported measurements in order to obtain the lowest possible limits of detection. The voltammetric and polarographic techniques, due to their sensitivity and easiness, could be used as alternatives to other, more complicated, analytical assays. Still, growing interest in designing a new construction of the working electrodes enables us to prepare new measurement procedures and obtain lower limits of detection. A brief description of the measured compounds has been presented, along with a comparison of the obtained results.

A graphene-based electrochemical flow analysis device for simultaneous determination of dopamine, 5-hydroxytryptamine, and melatonin

A graphene-based electrochemical flow analysis device for simultaneous determination of dopamine, 5-hydroxytryptamine, and melatonin.

A Sensitive Electrochemical Sensor Based on Sonogel-Carbon Material Enriched with Gold Nanoparticles for Melatonin Determination

In this work, the development of an electrochemical sensor for melatonin determination is presented. The sensor was based on Sonogel-Carbon electrode material (SNGCE) and Au nanoparticles (AuNPs). The low-cost and environmentally friendly SNGCE material was prepared by the ultrasound-assisted sonogel method. AuNPs were prepared by a chemical route and narrow size distribution was obtained. The electrochemical characterization of the SNGCE/AuNP sensor was carried out by cyclic voltammetry in the presence of a redox probe. The analytical performance of the SNGCE/AuNP sensor in terms of linear response range, repeatability, selectivity, and limit of detection was investigated. The optimized SNGCE/AuNP sensor displayed a low detection limit of 8.4 nM melatonin in synthetic samples assessed by means of the amperometry technique. The potential use of the proposed sensor in real sample analysis and the anti-matrix capability were assessed by a recovery study of melatonin detection in human peripheral blood serum with good accuracy.

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Carbon Nanotubes, Graphene, and Carbon Dots as Electrochemical Biosensing Composites

Carbon nanomaterials (CNMs) have been extensively used as electrochemical sensing composites due to their interesting chemical, electronic, and mechanical properties giving rise to increased performance. Due to these materials' unknown long-term ecological fate, care must be given to make their use tractable. In this review, the design and use of carbon nanotubes (CNTs), graphene, and carbon dots (CDs) as electrochemical sensing electrocatalysts applied to the working electrode surface are surveyed for various biosensing applications. Graphene and CDs are readily biodegradable as compared to CNTs. Design elements for CNTs that carry over to graphene and CDs include Coulombic attraction of components and using O or N atoms that serve as tethering points for attaching electrocatalytically active nanoparticles (NPs) and/or other additives.

Recent Advances in Electrochemical and Optical Sensors for Detecting Tryptophan and Melatonin

Tryptophan and melatonin are pleiotropic molecules, each capable of influencing several cellular, biochemical, and physiological responses. Therefore, sensitive detection of tryptophan and melatonin in pharmaceutical and human samples is crucial for human well-being. Mass spectrometry, high-performance liquid chromatography, and capillary electrophoresis are common methods for both tryptophan and melatonin analysis; however, these methods require copious amounts of time, money, and manpower. Novel electrochemical and optical detection tools have been subjects of intensive research due to their ability to offer a better signal-to-noise ratio, high specificity, ultra-sensitivity, and wide dynamic range. Recently, researchers have designed sensitive and selective electrochemical and optical platforms by using new surface modifications, microfabrication techniques, and the decoration of diverse nanomaterials with unique properties for the detection of tryptophan and melatonin. However, there is a scarcity of review articles addressing the recent developments in the electrochemical and optical detection of tryptophan and melatonin. Here, we provide a critical and objective review of high-sensitivity tryptophan and melatonin sensors that have been developed over the past six years (2015 onwards). We review the principles, performance, and limitations of these sensors. We also address critical aspects of sensitivity and selectivity, limit and range of detection, fabrication process and time, durability, and biocompatibility. Finally, we discuss challenges related to tryptophan and melatonin detection and present future outlooks.

Facile Green Approach for Developing Electrochemically Reduced Graphene Oxide-Embedded Platinum Nanoparticles for Ultrasensitive Detection of Nitric Oxide

Nitric oxide (NO) plays a crucial and important role in cellular physiology and also acts as a signaling molecule for cancer in humans. However, conventional detection methods have their own limitations in the detection of NO at low concentrations because of its high reactivity and low lifetime. Herein, we report a strategy to fabricate Pt nanoparticle-decorated electrochemically reduced graphene oxide (erGO)-modified glassy carbon electrode (GCE) with efficiency to detect NO at a low concentration. For this study, Pt@erGO/GCE was fabricated by employing two different sequential methods [first GO reduction followed by Pt electrodeposition (SQ-I) and Pt electrodeposition followed by GO reduction (SQ-II)]. It was interesting to note that the electrocatalytic current response for SQ-I (184 μA) was ∼15 and ∼3 folds higher than those of the bare GCE (11.7 μA) and SQ-II (61.5 μA). The higher current response was mainly attributed to a higher diffusion coefficient and electrochemically active surface area. The proposed SQ-I electrode exhibited a considerably low LOD of 52 nM (S/N = 3) in a linear range of 0.25-40 μM with a short response time (0.7 s). In addition, the practical analytical applicability of the proposed sensor was also verified.

Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review

Over the last years, different nanomaterials have been investigated to design highly selective and sensitive sensors, reaching nano/picomolar concentrations of biomolecules, which is crucial for medical sciences and the healthcare industry in order to assess physiological and metabolic parameters. The discovery of graphene (G) has unexpectedly impulsed research on developing cost-effective electrode materials owed to its unique physical and chemical properties, including high specific surface area, elevated carrier mobility, exceptional electrical and thermal conductivity, strong stiffness and strength combined with flexibility and optical transparency. G and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the area of optical and electrochemical sensors. The presence of oxygenated functional groups makes GO nanosheets amphiphilic, facilitating chemical functionalization. G-based nanomaterials can be easily combined with different types of inorganic nanoparticles, including metals and metal oxides, quantum dots, organic polymers, and biomolecules, to yield a wide range of nanocomposites with enhanced sensitivity for sensor applications. This review provides an overview of recent research on G-based nanocomposites for the detection of bioactive compounds, providing insights on the unique advantages offered by G and its derivatives. Their synthesis process, functionalization routes, and main properties are summarized, and the main challenges are also discussed. The antioxidants selected for this review are melatonin, gallic acid, tannic acid, resveratrol, oleuropein, hydroxytyrosol, tocopherol, ascorbic acid, and curcumin. They were chosen owed to their beneficial properties for human health, including antibiotic, antiviral, cardiovascular protector, anticancer, anti-inflammatory, cytoprotective, neuroprotective, antiageing, antidegenerative, and antiallergic capacity. The sensitivity and selectivity of G-based electrochemical and fluorescent sensors are also examined. Finally, the future outlook for the development of G-based sensors for this type of biocompounds is outlined.

Application of magnetic nanomaterials in electroanalytical methods: A review

Magnetic nanomaterials (MNMs) have gained high attention in different fields of studies due to their ferromagnetic/superparamagnetic properties and their low toxicity and high biocompatibility. MNMs contain magnetic elements such as iron and nickel in metallic, bimetallic, metal oxide, and mixed metal oxide. In electroanalytical methods, MNMs have been applied as sorbents for sample preparation before the electrochemical detection (sorbent role), as the electrode modifier (catalytic role), and the integration of the above two roles (as both sorbent and catalytic agent). In this paper, the application of MNMs in electroanalytical methods have been classified based on the main role of the nanomaterial and discussed separately. Furthermore, catalytic activities of MNMs in electroanalytical methods such as redox electrocatalytic, nanozymes catalytic (peroxidase, catalase activity, oxidase activity, superoxide dismutase activity), catalyst gate, and nanocontainer have been discussed.

Tin disulfide-graphene oxide-β-cyclodextrin mediated electro-oxidation of melatonin hormone: an efficient platform for electrochemical sensing

Here, we have developed an electrochemical sensor based on integrated 2D materials including tin disulfide (SnS2) nanoflakes, graphene oxide (GO), and β-cyclodextrin (β-CD) forming a ternary nanocomposite decorated on a screen-printed electrode (SPE) for the electrochemical detection of melatonin. Hydrothermally synthesized SnS2 was mixed with GO/β-CD to prepare the ternary composite via an ultra-sonication process. The nanocomposite was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and field emission transmission electron microscopy (FEG-TEM). The electrochemical performance of the modified electrode was investigated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The electrochemical sensor exhibited a linearity range from 1 nM to 100 μM with the lowest detection limit of 0.17 nM. The sensor was successfully applied for the detection of melatonin in commercial drugs and human saliva, which showed a consistent result with the Enzyme-Linked Immuno-Sorbent Assay (ELISA).

Structural and physico-chemical evaluation of melatonin and its solution-state excited properties, with emphasis on its binding with novel coronavirus proteins

Melatonin is a natural hormone from the pineal gland that regulates the sleep-wake cycle. We examined the structure and physico-chemical properties of melatonin using electronic structure methods and molecular-mechanics tools. Density functional theory (DFT) was used to optimise the ground-state geometry of the molecule from frontier molecular orbitals, which were analysed using the B3LYP functional. As its electrons interacted with electromagnetic radiation, electronic excitations between different energy levels were analysed in detail using time-dependent DFT with CAM-B3LYP orbitals. The results provide a wealth of information about melatonin's electronic properties, which will enable the prediction of its bioactivity. Molecular docking studies predict the biological activity of the molecules against the coronavirus2 protein. Excellent docking scores of −7.28, −7.20, and −7.06 kcal/mol indicate that melatonin can help to defend against the viral load in vulnerable populations. Hence it can be investigated as a candidate drug for the management of COVID.

•

Detailed quantum mechanical studies of the sleep regulating hormone melatonin

•

Analysed the intramolecular stabilisation and nonlinear properties

•

Excited state properties using TD-DFT formalism

•

Compound active binds to three known novel coronavirus 2019 proteins.

Electrochemical detection of exogenously administered melatonin in the brain

Melatonin (MT) is an important electroactive hormone that regulates different physiological actions in the brain, ranging from circadian clock to neurodegeneration. An impressive number of publications have highlighted the effectiveness of MT treatments in different types of sleep and neurological disorders, including Alzheimer's and Parkinson's disease. The ability to detect MT in different regions of the brain would provide further insights into the physiological roles and therapeutic effects of MT. While multiple electrochemical methods have been used to detect MT in biological samples, monitoring MT in the brain of live animals has not been demonstrated. Here, we optimized a square wave voltammetry (SWV) electroanalytical method to evaluate the MT detection performance at CFEs in vitro and in vivo. SWV was able to sensitively detect the MT oxidation peak at 0.7 V, and discriminate MT from most common interferents in vitro. More importantly, using the optimized SWV, CFEs successfully detected and reliably quantified MT concentrations in the visual cortex of anesthetized mice after intraperitoneal injections of different MT doses, offering stable MT signals for up to 40 minutes. To the best of our knowledge, this is the first electrochemical measurement of exogenously administered MT in vivo. This electrochemical MT sensing technique will provide a powerful tool for further understanding MT's action in the brain.

Nicotinamide adenine dinucleotide immobilized tungsten trioxide nanoparticles for simultaneous sensing of norepinephrine, melatonin and nicotine

Herein, we report the anionic surfactant, ethylene diamine tetraacetic acid (EDTA), mediated synthesis of WO₃ nanoparticles and its subsequent modification through gamma irradiation (GI) and electrochemical immobilization with nicotinamide adenine dinucleotide (NAD). Glassy carbon electrode (GCE) modified with GI-WO₃ NPs and the enzyme NAD exhibited strong electro-oxidation of three important biomolecules such as norepinephrine (NEP), melatonin (MEL) and nicotine (NIC) in 0.1 M phosphate buffer saline (PBS) at physiological pH of 7. Square wave voltammetry (SWV) studies exhibited three well-defined peaks at potentials of 120, 570 and 840 mV, corresponding to the oxidation of NEP, MEL and NIC respectively, indicating that simultaneous determination of these compounds is feasible at the NAD/GI EDTA-WO₃/GCE. The proposed sensor displayed a wide linear range of 0.010-1000 μM with the lowest detection limit of 1.4 nM for NEP, 2.6 nM for MEL and 1.7 nM for NIC respectively. Furthermore, the modified electrode was successfully applied to detect NEP, MEL and NIC in pharmaceutical and cigarette samples with excellent selectivity and reproducibility.

A carbon paste electrode modified with Al2O3-supported palladium nanoparticles for simultaneous voltammetric determination of melatonin, dopamine, and acetaminophen

The authors have modified a carbon paste electrode with Al₂O₃-supported palladium nanoparticles (PdNP@Al₂O₃) to obtain a sensor for simultaneous voltammetric determination of melatonin (MT), dopamine (DA) and acetaminophen (AC). The PdNP@Al₂O₃ was characterized by scanning electron microscopy and energy-dispersive X-ray spectra. The sensor can detect DA, AC, MT and their mixtures by giving distinct signals at working voltages of typically 236, 480 and 650 mV (vs. Ag/AgCl), respectively. Differential pulse voltammetric peak currents of DA, AC and MT increase linearly in the 50 nmol L^-1 - 1.45 mmol L^-1, 40 nmol L^-1 -1.4 mmol L^-1, and 6.0 nmol L^-1 - 1.4 mmol L^-1 concentration ranges. The limits of detection are 36.5 nmol L^-1 for DA, 36.5 nmol L^-1 for AC, and 21.6 nmol L^-1 for MT. The sensor was successfully used to detect the analytes in (spiked) human serum and drug samples. Graphical abstract Schematic presentation of Al2O3-supported palladium nanoparticles (PdNP@Al2O3) for modification of a carbon paste electrode (CPE) to develop a voltammetric sensor for the simultaneous determination of dopamine (DA), acetaminophen (AC) and melatonin (MT).

Self-stacking of exfoliated charged nanosheets of LDHs and graphene as biosensor with real-time tracking of dopamine from live cells

This study introduces a new strategy for periodic stacking of positively charged NiAl layered double hydroxides (LDHs) nanosheets with negatively charged monolayers of graphene (G) by systematically optimizing several parameters in a controlled co-feeding fashion and resultant heterostacked NiAl LDH/G LBL nanocomposites have been practically applied in sensitive detection of dopamine released from live cells as early Parkinson's disease (PD) diagnostic tool. PD is the second most chronic neurodegenerative disorder with gradual progressive loss of movement and muscle control causing substantial disability and threatening the life seriously. Unfortunately majority of dopaminergic neurons present in substantia nigra of PD patients are destroyed before it is being clinically diagnosed, so early stages PD diagnosis is essential. Because of direct neighboring of extremely conductive graphene to semiconductive LDHs layers, enhanced intercalation capability of LDHs, and huge surface area with numerous active sites, good synergy effect is harvested in heteroassembled NiAl LDH/G LBL material, which in turn shows admirable electrocatalytic ability in DA detection. The interference induced by UA and AA is effectively eliminated especially after the modifying the electrode with Nafion. The outstanding electrochemical sensing performance of NiAl LDH/G LBL modified electrode has been achieved in terms of broad linear range and lowest real detection limit of 2 nM (S/N = 3) towards DA oxidation. Benefitting from superior efficiency, biosensor has been successfully used for real-time in-vitro tracking of DA efflux from live human nerve cell after being stimulated. We believe that our biosensing platform of structurally integrated well-ordered LBL heteroassembly by inserting graphene directly to the interlayer galleries of LDHs material will open up new avenue in diseases determination window.

Direct electrochemical reduction of hematite decorated graphene oxide (α-Fe2O3@erGO) nanocomposite for selective detection of Parkinson's disease biomarker

An unusual approach is reported herein to fabricate magnetic hematite (α-Fe₂O₃) decorated electrochemically reduced graphene oxide (α-Fe₂O₃@erGO) nanocomposite. The method utilizes direct electrochemical reduction of self-assembled, ex-situ synthesized α-Fe₂O₃ anchored GO to erGO (α-Fe₂O₃@erGO) on glassy carbon electrode (GCE) for selective detection dopamine (DA), an important biomarker of Parkinson's disease. The formation of α-Fe₂O₃@erGO/GCE has been confirmed by XPS and Raman spectroscopy. α-Fe₂O₃@erGO modified GCE exhibits synergistic catalytic activity nearly 2.2 and 5 fold higher than α-Fe₂O₃@GO and other modified electrodes, respectively towards oxidation of DA. The fabricated sensor exhibited linear dynamic ranges over 0.25 - 100 µM in response to DA with a LOD of 0.024 µM (S/N = 3), LOQ of 0.08 µM (S/N = 10), and a sensitivity of 12.56 µA µM^-1 cm^-2. Finally, the practical analytical application of the proposed α-Fe₂O₃@erGO/GCE was investigated for the determination of DA in commercially available pharmaceutical formulation and human serum samples, and showed satisfactory recovery results towards DA.

Fabrication of Amine-Modified Magnetite-Electrochemically Reduced Graphene Oxide Nanocomposite Modified Glassy Carbon Electrode for Sensitive Dopamine Determination

Amine-modified magnetite (NH₂-Fe₃O₄)/reduced graphene oxide nanocomposite modified glassy carbon electrodes (NH₂-Fe₃O₄/RGO/GCEs) were developed for the sensitive detection of dopamine (DA). The NH₂-Fe₃O₄/RGO/GCEs were fabricated using a drop-casting method followed by an electrochemical reduction process. The surface morphologies, microstructure and chemical compositions of the NH₂-Fe₃O₄ nanoparticles (NPs), reduced graphene oxide (RGO) sheets and NH₂-Fe₃O₄/RGO nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. The electrochemical behaviors of DA on the bare and modified GCEs were investigated in phosphate buffer solution (PBS) by cyclic voltammetry (CV). Compared with bare electrode and RGO/GCE, the oxidation peak current (i_pa) on the NH₂-Fe₃O₄/RGO/GCE increase significantly, owing to the synergistic effect between NH₂-Fe₃O₄ NPs and RGO sheets. The oxidation peak currents (i_pa) increase linearly with the concentrations of DA in the range of 1 × 10^-8 mol/L - 1 × 10^-7 mol/L, 1 × 10^-7 mol/L - 1 × 10^-6 mol/L and 1 × 10^-6 mol/L - 1 × 10^-5 mol/L. The detection limit is (4.0 ± 0.36) ×10^-9 mol/L (S/N = 3). Moreover, the response peak currents of DA were hardly interfered with the coexistence of ascorbic acid (AA) and uric acid (UA). The proposed NH₂-Fe₃O₄/RGO/GCE is successfully applied to the detection of dopamine hydrochloride injections with satisfactory results. Together with low cost, facile operation, good selectivity and high sensitivity, the NH₂-Fe₃O₄/RGO/GCEs have tremendous prospects for the detection of DA in various real samples.

Preparation of Cu₂O-Reduced Graphene Nanocomposite Modified Electrodes towards Ultrasensitive Dopamine Detection

Cu₂O-reduced graphene oxide nanocomposite (Cu₂O-RGO) was used to modify glassy carbon electrodes (GCE), and applied for the determination of dopamine (DA). The microstructure of Cu₂O-RGO nanocomposite material was characterized by scanning electron microscope. Then the electrochemical reduction condition for preparing Cu₂O-RGO/GCE and experimental conditions for determining DA were further optimized. The electrochemical behaviors of DA on the bare electrode, RGO- and Cu₂O-RGO-modified electrodes were also investigated using cyclic voltammetry in phosphate-buffered saline solution (PBS, pH 3.5). The results show that the oxidation peaks of ascorbic acid (AA), dopamine (DA), and uric acid (UA) could be well separated and the peak-to-peak separations are 204 mV (AA-DA) and 144 mV (DA-UA), respectively. Moreover, the linear response ranges for the determination of 1 × 10⁻⁸ mol/L~1 × 10⁻⁶ mol/L and 1 × 10⁻⁶ mol/L~8 × 10⁻⁵ mol/L with the detection limit 6.0 × 10⁻⁹ mol/L (S/N = 3). The proposed Cu₂O-RGO/GCE was further applied to the determination of DA in dopamine hydrochloride injections with satisfactory results.

A core–shell structured Ni–Co@Pt/C nanocomposite-modified sensor for the voltammetric determination of pseudoephedrine HCl

Herein, a core–shell structured Ni–Co@Pt/C nanocomposite was developed for the determination of pseudoephedrine HCl (PSE) in drug samples.

Development of an Fe3O4@Cu silicate based sensing platform for the electrochemical sensing of dopamine

Abnormal levels of dopamine (DA) in body fluids is an indication of serious health issues, hence development of highly sensitive platforms for the precise detection of DA is highly essential. Herein, we demonstrate an Fe₃O₄@Cu silicate based electrochemical sensing platform for the detection of DA. Morphology and BET analysis shows the formation of ∼320 nm sized sea urchin-like Fe₃O₄@Cu silicate core–shell nanostructures with a 174.5 m² g⁻¹ surface area. Compared to Fe₃O₄ and Fe₃O₄@SiO₂, the Fe₃O₄@Cu silicate urchins delivered enhanced performance towards the electrochemical sensing of DA in neutral pH. The Fe₃O₄@Cu silicate sensor has a 1.37 μA μM⁻¹ cm⁻² sensitivity, 100–700 μM linear range and 3.2 μM limit of detection (LOD). In addition, the proposed Fe₃O₄@Cu silicate DA sensor also has good stability, selectivity, reproducibility and repeatability. The presence of Cu in Fe₃O₄@Cu silicate and the negatively charged surface of the Cu silicate shell play a vital role in achieving high selectivity and sensitivity during DA sensing. The current investigation not only represents the development of a highly selective DA sensor but also directs towards the possibility for the fabrication of other Cu silicate based core–shell nanostructures for the precise detection of DA.

Abnormal levels of dopamine (DA) in body fluids is an indication of serious health issues, hence development of highly sensitive platforms for the precise detection of DA is highly essential.

Iron-Based Nanomaterials/Graphene Composites for Advanced Electrochemical Sensors

Iron oxide nanostructures (IONs) in combination with graphene or its derivatives-e.g., graphene oxide and reduced graphene oxide-hold great promise toward engineering of efficient nanocomposites for enhancing the performance of advanced devices in many applicative fields. Due to the peculiar electrical and electrocatalytic properties displayed by composite structures in nanoscale dimensions, increasing efforts have been directed in recent years toward tailoring the properties of IONs-graphene based nanocomposites for developing more efficient electrochemical sensors. In the present feature paper, we first reviewed the various routes for synthesizing IONs-graphene nanostructures, highlighting advantages, disadvantages and the key synthesis parameters for each method. Then, a comprehensive discussion is presented in the case of application of IONs-graphene based composites in electrochemical sensors for the determination of various kinds of (bio)chemical substances.

Graphene nanoribbon/FePt bimetallic nanoparticles/uric acid as a novel magnetic sensing layer of screen printed electrode for sensitive determination of ampyra

A novel electrochemical sensor for sensitive determination of ampyra (Am) based on graphene nanoribbons modified by iron-platinum bimetallic nanoparticles and uric acid (SPCE/FePtGNR/UA) dropped on the screen-printed carbon electrode (SPCE) surface and magnetically captured onto an SPCE working electrode surface is reported in the present work. The modified nanocomposite and sensing layer was characterized by different techniques, including cyclic voltammetry (CV), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray powdered diffraction (XRD). Am determination by conventional electrochemical methods is not possible, because of its high redox overpotential. Therefore, the differential pulse voltammetry (DPV) signals of UA were used as a redox probe for indirect electrochemical determination of Am. The limit of detection (LOD) and linear concentration range were obtained as 0.028 and 0.08-9.0µmolL^-1 (3S_b/m = 3), respectively. The feasibility of the proposed method was examined by the detection of Am in biological and pharmaceutical samples with satisfactory results. The constructed electrochemical sensor was applied for fast, simple and sensitive detection of Am in real environments.

Melatonin charge transfer complex with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone: Molecular structure, DFT studies, thermal analyses, evaluation of biological activity and utility for determination of melatonin in pure and dosage forms

A simple, accurate and fast spectrophotometric method for the quantitative determination of melatonin (ML) drug in its pure and pharmaceutical forms was developed based on the formation of its charge transfer complex with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as an electron acceptor. The different conditions for this method were optimized accurately. The Lambert-Beer's law was found to be valid over the concentration range of 4-100μgmL^-1 ML. The solid form of the CT complex was structurally characterized by means of different spectral methods. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations were carried out. The different quantum chemical parameters of the CT complex were calculated. Thermal properties of the CT complex and its kinetic thermodynamic parameters were studied, as well as its antimicrobial and antifungal activities were investigated. Molecular docking studies were performed to predict the binding modes of the CT complex components towards E. coli bacterial RNA and the receptor of breast cancer mutant oxidoreductase.

Facile and novel synthesis of palladium nanoparticles supported on a carbon aerogel for ultrasensitive electrochemical sensing of biomolecules

Highly stable palladium nanoparticles (Pd NPs) supported on a porous carbon aerogel (Pd/CA) prepared by a facile microwave reduction route is reported. The as-prepared Pd/CA composites were characterized by various techniques, viz. XRD, Raman, SEM-EDX, FE-TEM, BET, and TGA. The Pd NPs were found to disperse uniformly in the porous carbon matrix, which possesses a large surface area (851.8 m² g^-1) and pore volume (3.021 cm³ g^-1). The Pd/CA composite was found to possess extraordinary electrocatalytic activity and excellent selectivity for simultaneous detection of dopamine (DA) and melatonin (ML). The Pd/CA-modified electrode exhibited a wide linear response range for electrochemical sensing of DA (0.01-100 μM) and ML (0.02-500 μM) with a detection limit of 0.0026 and 0.0071 μM, respectively. In addition, the electrochemical sensor reported herein was successfully applied for the detection of DA and ML in human serum and urine samples, revealing perspective practical applications.

Self-Assembled and One-Step Synthesis of Interconnected 3D Network of Fe3O4/Reduced Graphene Oxide Nanosheets Hybrid for High-Performance Supercapacitor Electrode

In the present work, we have synthesized three-dimensional (3D) reduced graphene oxide nanosheets (rGO NSs) containing iron oxide nanoparticles (Fe₃O₄ NPs) hybrids (3D Fe₃O₄/rGO) by one-pot microwave approach. Structural and morphological studies reveal that the as-synthesized Fe₃O₄/rGO hybrids were composed of faceted Fe₃O₄ NPs induced into the interconnected network of rGO NSs. The morphologies and structures of the 3D hybrids have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectrometer (XPS). The electrochemical studies were analyzed by cyclic voltammetry, galvanostatic charge/discharge measurements, and electrochemical impedance spectroscopy, which demonstrate superior electrochemical performance as supercapacitors electrode application. The specific capacitances of 3D hybrid materials was 455 F g^-1 at the scan rate of 8 mV s^-1, which is superior to that of bare Fe₃O₄ NPs. Additionally, the 3D hybrid shows good cycling stability with a retention ratio of 91.4 after starting from ∼190 cycles up to 9600 cycles. These attractive results suggest that this 3D Fe₃O₄/rGO hybrid shows better performance as an electrode material for high-performance supercapacitors.

Magnetic graphene solid-phase extraction in the determination of polycyclic aromatic hydrocarbons in water

Magnetic graphene nanocomposite was fabricated and applied to the extraction of PAHs in water, followed by GC-MS. The method showed a good linearity. The limits of detection (S/N = 3) were in a range between 0.02–14.3 ng L⁻¹.

Nanomolar simultaneous determination of tryptophan and melatonin by a new ionic liquid carbon paste electrode modified with SnO2-Co3O4@rGO nanocomposite

This work describes the development of a new sensor for simultaneous determination of tryptophan and melatonin. The proposed sensor was an ionic liquid carbon paste electrode modified with reduced graphene oxides decorated with SnO₂-Co₃O₄ nanoparticles. The voltammetric oxidation of the analytes by the proposed sensor confirmed that the electrooxidation process undergoes a two-electron/one-proton reaction for melatonin and a two-electron/two-proton reaction for tryptophan in diffusion-controlled processes. Moreover, based on the excellent electrochemical properties of the modified electrode, a sensitive voltammetric method was used for individual and simultaneous determination of melatonin and tryptophan in the aqueous solutions. Under the optimized experimental conditions, a linear response obtained in the range of 0.02 to 6.00μmolL^-1 with detection limits of 4.1 and 3.2nmolL^-1 for melatonin and tryptophan, respectively. The prepared sensor possessed accurate and rapid response toward melatonin and tryptophan with a good sensitivity, selectivity, stability, and repeatability. Finally, the applicability of the proposed sensor was verified by evaluation of melatonin and tryptophan in various real samples including human serum and tablet samples.

Sensitive and simple simultaneous determination of morphine and codeine using a Zn2SnO4nanoparticle/graphene composite modified electrochemical sensor

Simultaneous determination of morphine and codeine using a nanocomposite modified electrochemical sensor.