A cobalt(II) coordination polymer-derived catalyst engineered via temperature-induced semi-reversible single-crystal-to-single-crystal (SCSC) dehydration for efficient liquid-phase epoxidation of olefins

Single-crystal-to-single-crystal (SCSC) transformations provide more avenues for phase transitions, which have piqued great interest in crystal engineering. In this work, a 3D Co(II)-based coordination polymer (CP), {Co2(OH2)8(btec)}·4H2O (1), (where (btec)4- = 1,2,4,5-benzenetetracarboxylate) undergoes SCSC transition upon heating at 180 °C to afford an anhydrous phase [Co2(btec)] (1'). Room-temperature water-vapour induced semi-reversible SCSC transformation of 1' involves condensation of two water molecules coordinating to the metal cluster, yielding a new framework [Co2(OH2)2(btec)] (2). These SCSC transitions were accomplished through a sequential bond breaking and new bond formation process which was accompanied by colour changes from orange (1) → violet (1') → pink (2). All materials were structurally elucidated by single-crystal X-ray diffraction (SCXRD) and further established by various analytical techniques. According to SCXRD data, all the frameworks possess octahedral geometries around the cobalt(II) sphere. SCXRD studies further revealed that 1 is a polymeric architecture with a binodal 4-c sql topology while 1' and 2 possess (3,6)-c kgd and (4,6)-c scu 3D nets, respectively. By virtue of multitopicity exhibited by the tetracarboxylate, the coordination number of the linker around the Co(II) sphere increased from four (in 1) to eight (in 1') and then decreased to six (in 2). Most interestingly, permanent porosity could be observed for the dihydrate 2, originated from potential void space as substantiated by dinitrogen (N2) sorption isotherm. These porous frameworks were active catalysts for the aerobic epoxidation of the model substrate cyclohexene using molecular oxygen (O2) as the final oxidant in the presence of the sacrificial i-butyraldehyde (IBA) reductant. For using the dihydrous phase 2, cyclohexene and various other olefins were catalytically oxidised to their corresponding epoxides with up to 38.5% conversion and 99.0% selectivity. The catalyst 2 can be expediently recycled in four runs without significant loss of activity. This research demonstrates that a little innovation in the active-site-engineered organic-inorganic hybrid materials can significantly enhance the catalytic performance and selectivity of coordination polymer-derived heterogeneous catalysts.

Ionic Liquid Modified Fe-Porphyrinic Metal-Organic Frameworks as Efficient and Selective Photocatalysts for CO2 Reduction

Porphyrin-based metal-organic frameworks (MOFs) are ideal platforms for heterogeneous photocatalysts toward CO2 reduction. To further explore photocatalytic MOF systems, it is also necessary to consider their ability to fine-tune the microenvironments of the active sites, which affects their overall catalytic operation. Herein, a kind of ionic liquid (IL, here is 3-butyric acid-1-methyl imidazolium bromide, BAMeImBr) was anchored to iron-porphyrinic Zr-MOFs with different amounts to obtain ILx@MOF-526 (MOF-526 = Zr6O4(OH)4(FeTCBPP)3, FeTCBPP = iron 5,10,15,20-tetra[4-(4'-carboxyphenyl)phenyl]-porphyrin, x = 100, 200, and 400). ILx@MOF-526 series was designed to investigate the effects of the microenvironmental and electronic structural modification on the efficiency and selectivity of the photochemical reduction of CO2 after introducing IL fragments. Compared to parent MOF-526, the production and selectivity of CO were greatly improved in the absence of any photosensitizer under visible light by the ILx@MOF-526 series. Among them, the CO yield of IL200@MOF-526 was up to 14.0 mmol g-1 within 72 h with a remarkable CO selectivity of 97%, which is superior to that of MOF-526 without BAMeIm+ modification and other amounts of BAMeIm+ loaded. Furthermore, density functional theory calculations were performed to study the mechanism of the CO2 reduction.

Copper(II) Ions Originating from CuBTC MOF Act as a Soluble Catalyst in the Friedländer Synthesis

The copper-based metal-organic framework (MOF), CuBTC (where H3BTC = benzene-1,3,5-tricarboxylate), has been reported as a reusable heterogeneous catalyst for the Friedländer synthesis of substituted quinolines, which are desirable targets in the pharmaceutical industry. Because of this application, we further investigated the CuBTC-catalyzed Friedländer synthesis of 3-acetyl-2-methyl-4-phenylquinoline. CuBTC was synthesized in-house and used as a catalyst for the Friedländer synthesis. Fresh and used CuBTC were analyzed using scanning electron microscopy (SEM), powder X-ray diffraction (pXRD), and X-ray photoelectron spectroscopy (XPS). The used CuBTC shows structural breakdown in pXRD patterns and SEM images. Despite the structural breakdown, the desired product, 3-acetyl-2-methyl-4-phenylquinoline, is still produced in a moderate yield (76.3% ± 0.2), as confirmed via time-of-flight mass spectrometry and nuclear magnetic resonance spectroscopy. Inductively coupled plasma atomic emission spectroscopy of the recovered supernatant solution indicates the presence of copper(II) ions in solution. Thus, we hypothesized that the standard Friedländer conditions may degrade the CuBTC framework, resulting in copper(II) ions in solution. Control experiments with copper(II) from Cu(NO3)2·3H2O catalyzes the Friedländer reaction in yields (75.6% ± 0.1) equal to that of the CuBTC MOF. Overall, our findings suggest that CuBTC acts as a copper(II) source, and the copper(II) ions originating from the CuBTC MOF are responsible for the observed catalysis.

A simple electrochemical strategy for the detection of the cancer marker CA19-9 by signal amplification using copper organic framework nanocomposite

In this work, label-free electrochemical immunosensing of the cancer biomarker carbohydrate antigen 19-9 (CA19-9) is reported using [Fe(CN)6]3-/4- as a signal probe and a copper organic framework (Cu-BTC) nanocomposite for the amplification of the signal. The immunosensor was fabricated by the following process. First, the Cu-BTC nanomaterial with a larger surface area and good biocompatibility was synthesized to improve the dispersion of gold nanoparticles (Au NPs). Then, nitrogen-doped graphene (N-GR) was combined with Cu-BTC to form the nanocomposite. The synthesized Cu-BTC@N-GR@AuNPs@CS nanocomposite was employed to modify the surface of the immunosensor to accelerate the electron transfer rate and improve the immobilization amount of CA19-9 antibodies (Ab). Various techniques, including TEM, SEM and XPS were used to characterize Cu-BTC and nanocomposites. Differential pulse voltammetry (DPV) was used to measure the electrochemical response of the immunosensor in [Fe(CN)6]3-/4-. The signal intensity of the immunosensor was linearly changed upon increasing the concentration of CA19-9 antigen from 10 μU mL-1 to 100 U mL-1, and a detection limit of 4.2 μU mL-1 was achieved. Furthermore, the immunosensor showed good stability, reproducibility and specificity, indicating its potential application in clinical analysis.

Computational NMR investigation of mixed-metal (Al,Sc)-MIL-53 and its phase transitions

Compositionally complex metal-organic frameworks (MOFs) have properties that depend on local structure that is often difficult to characterise. In this paper a density functional theory (DFT) computational study of mixed-metal (Al,Sc)-MIL-53, a flexible MOF with several different forms, was used to calculate the relative energetics of these forms and to predict NMR parameters that can be used to evaluate whether solid-state NMR spectroscopy can be used to differentiate, identify and characterise the forms adopted by mixed-metal MOFs of different composition. The NMR parameters can also be correlated with structural features in the different forms, giving fundamental insight into the nature and origin of the interactions that affect nuclear spins. Given the complexity of advanced NMR experiments required, and the potential need for expensive and difficult isotopic enrichment, the computational work is invaluable in predicting which experiments and approaches are likely to give the most information on the disorder, local structure and pore forms of these mixed-metal MOFs.

Ni-Rh-based bimetallic conductive MOF as a high-performance electrocatalyst for the oxygen evolution reaction

Metal-organic frameworks (MOFs) have recently been considered the promising catalysts due to their merits of abundant metal sites, versatile coordination groups, and tunable porous structure. However, low electronic conductivity of most MOFs obstructs their direct application in electrocatalysis. In this work, we fabricate an Ni-Rh bimetallic conductive MOF ([Ni2.85Rh0.15(HHTP)2]n/CC) grown in situ on carbon cloth. Abundant nanopores in the conductive MOFs expose additional catalytic active sites, and the advantageous 2D π-conjugated structure helps accelerate charge transfer. Owing to the introduction of Rh, [Ni2.85Rh0.15(HHTP)2]n/CC exhibited substantially improved oxygen evolution reaction (OER) activity and exhibited only an overpotential of 320 mV to achieve the current density of 20 mA cm-2. The remarkable OER performance confirmed by the electrochemical tests could be ascribed to the synergistic effect caused by the doped Rh together with Ni in [Ni2.85Rh0.15(HHTP)2]n/CC, thereby exhibiting outstanding electrocatalytic performance.

Gas-phase organometallic catalysis in MFM-300(Sc) provided by switchable dynamic metal sites

MFM-300(Sc) was explored as a catalyst for the gas-phase hydrogenation of acetone. The catalysis results support the presence of non-permanent open Sc(III) sites within the structure due to the requirement of Lewis acid sites for the reaction to proceed. The open Sc(III) sites are generated in situ due to the presence of hemilabile Sc-O bonds. MFM-300(Sc) showed high mechanical and chemical stability, and the crystalline structure was maintained after the catalytic reaction. The catalytic activity of the material was quantified by performing a gas-phase reaction using a continuous flow reactor. The acetone conversion in MFM-300(Sc) was estimated to be 27.7% with no loss of activity after catalytic cycles.

Two pillared-layer metal-organic frameworks based on the pinwheel trinuclear carboxylate-clusters of Zn(II) and Co(II): synthesis, crystal structures, magnetic study, and Lewis acid catalysis

Using a dicarboxylic acid, [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂L1) and an exobidentate ligand, (1E,1'E)-N,N'-(1,4-phenylene)bis(1-(pyridin-4-yl)methanimine) (L2), two 3D interpenetrated networks, {[Zn₃(L1)₃(L2)]·9H₂O}_n (Zn-MOF) and {[Co₃(L1)₃(L2)(DMF)]·0.5DMF}_n (Co-MOF), have been prepared in good yields. The crystal structure analysis of Zn-MOF and Co-MOF revealed that both have a 3D pillared-layer structure based on pinwheel trinuclear metal-carboxylate clusters as secondary building units (SBUs). Furthermore, the structures also exhibited three-fold interpenetration. Although the overall networks in Zn-MOF and Co-MOF showed significant resemblances, there are marked differences in their crystal structures, which are associated with the coordination environment of the metal centre and the binding modes of the carboxylates. Gas adsorption studies (N₂ at 77 K and 1 bar) indicated that Co-MOF is more porous than Zn-MOF. Magnetic measurements on Co-MOF indicate a significant antiferromagnetic interaction (45 K to 303 K) between trimeric Co(II) S = 3/2 spins through syn-syn carboxylato bridges. Both MOFs were studied for the Lewis acid catalyzed Knoevenagel condensation reactions between benzaldehydes and malononitrile with an active methylene group, where Zn-MOF was found to be a better catalyst than Co-MOF. This was supported by the Monte Carlo simulations indicating the better substrate binding ability of Zn-MOF than Co-MOF.

Open metal site (OMS)-inspired investigation of adsorption and catalytic functions in a porous metal-organic framework (MOF)

In this article, we report the adsorption and catalytic study of the three-dimensional (3D) metal-organic framework (MOF) {Mn₂(1,4-bdc)₂(DMF)₂} (1) (1,4-bdcH₂, 1,4-benzene dicarboxylic acid; DMF, N,N-dimethylformamide) together with the synthesis and structure of two new Mn(II)-MOFs {Mn₃(Br-bdc)₃(DMF)₄} (2) and {Mn₃(NO₂-bdc)₃(DMF)₄} (3) (Br-bdcH₂, 2-bromo-1,4-benzene dicarboxylic acid; NO₂-bdcH₂, 2-nitro-1,4-benzene dicarboxylic acid) under solvothermal conditions. Compounds 2 and 3 have two-dimensional (2D) extended structures and feature trimeric {Mn₃(CO₂)₆} units that serve as secondary building units for the frameworks. The desolvated compound of 1, denoted as 1', having potential Mn(II) open metal sites (OMSs) lined in a one-dimensional (1D) Mn-chain interconnected by carboxylate groups, exhibits guest-selective adsorption of solvent vapours wherein the compound shows a stepwise profile with H₂O vapour, while a gated isotherm was recorded with MeOH. After realizing the favourable interaction of 1' with polar solvent molecules, we have used Mn(II) OMSs in 1' for efficient cyanosilylation reactions of aromatic aldehydes. We have recorded 100% conversion for eight aromatic aldehydes, while several other aldehydes showed appreciable conversion. Notably, the recorded conversions in the case of many substrates are higher than those for many other reported MOF catalysts.

Recent advances in non-plasmonic surface-enhanced Raman spectroscopy nanostructures for biomedical applications

Surface-enhanced Raman spectroscopy (SERS) is an emerging powerful vibrational technique offering unprecedented opportunities in biomedical science for the sensitive detection of biomarkers and the imaging and tracking of biological samples. Conventional SERS detection is based on the use of plasmonic substrates (e.g., Au and Ag nanostructures), which exhibit very high enhancement factors (EF = 1010 -1011 ) but suffers from serious limitations, including light-induced local heating effect due to ohmic loss and expensive price. These drawbacks may limit detection accuracy and large-scaled practical applications. In this review, we focus on alternative approaches based on plasmon-free SERS detection on low-cost nanostructures, such as carbons, oxides, chalcogenides, polymers, silicons, and so forth. The mechanism of non-plasmonic SERS detection has been attributed to interfacial charge transfer between the substrate and the adsorbed molecules, with no photothermal side-effects but usually less EF compared with plasmonic nanostructures. The strategies to improve Raman signal detection, through the tailoring of substrate composition, structure, and surface chemistry, is reviewed and discussed. The biomedical applications, for example, SERS cell characterization, biosensing, and bioimaging are also presented, highlighting the importance of substrate surface functionalization to achieve sensitive, accurate analysis, and excellent biocompatibility. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Ultrahigh Size Exclusion Selectivity for Carbon Dioxide from Nitrogen/Methane in an Ultramicroporous Metal-Organic Framework

Separations based on molecular size (molecular sieving) are a solution for environmental remediation. We have synthesized and characterized two new metal-organic frameworks (MOFs) (Zn₂M; M = Zn, Cd) with ultramicropores (<0.7 nm) suitable for molecular sieving. We explore the synthesis of these MOFs and the role that the DMSO/H₂O/DMF solvent mixture has on the crystallization process. We further explore the crystallographic data for the DMSO and methanol solvated structures at 273 and 100 K; this not only results in high-quality structural data but also allows us to better understand the structural features at temperatures around the gas adsorption experiments. Structurally, the main difference between the two MOFs is that the central metal in the trimetallic node can be changed from Zn to Cd and that results in a sub-Å change in the size of the pore aperture, but a stark change in the gas adsorption properties. The separation selectivity of the MOF when M = Zn is infinite given the pore aperture of the MOF can accommodate CO₂ while N₂ and/or CH₄ is excluded from entering the pore. Furthermore, due to the size exclusion behavior, the MOF has an adsorption selectivity of 4800:1 CO₂/N₂ and 5 × 10²⁸:1 CO₂/CH₄. When M = Cd, the pore aperture of the MOF increases slightly, allowing N₂ and CH₄ to enter the pore, resulting in a 27.5:1 and a 10.5:1 adsorption selectivity, respectively; this is akin to UiO-66, a MOF that is not able to function as a molecular sieve for these gases. The data delineate how subtle sub-Å changes to the pore aperture of a framework can drastically affect both the adsorption selectivity and separation selectivity.

Immobilizing a homogeneous manganese catalyst into MOF pores for α-alkylation of methylene ketones with alcohols

An encapsulation strategy via nano-confinement of a homogeneous manganese–phenanthroline complex into MOF pores selectively produced functionalized branched ketones.

Emerging MXene@Metal-Organic Framework Hybrids: Design Strategies toward Versatile Applications

Rapid progress on developing smart materials and design of hybrids is motivated by pressing challenges associated with energy crisis and environmental remediation. While emergence of versatile classes of nanomaterials has been fascinating, the real excitement lies in the design of hybrid materials with tunable properties. Metal-organic frameworks (MOFs) are the key materials for gas sorption and electrochemical applications, but their sustainability is challenged by limited chemical stability, poor electrical conductivity, and intricate, inaccessible pores. Despite tremendous efforts towards improving the stability of MOF materials, little progress has made researchers inclined toward developing hybrid materials. MXenes, a family of two-dimensional transition-metal carbides, nitrides and carbonitrides, are known for their compositional versatility and formation of a range of structures with rich surface chemistry. Hybridization of MOFs with functional layered MXene materials may be beneficial if the host structure provides appropriate interactions for stabilizing and improving the desired properties. Recent efforts have focused on integrating Ti₃C₂T_x and V₂CT_x MXenes with MOFs to result in hybrid materials with augmented electrochemical and physicochemical properties, widening the scope for emerging applications. This review discusses the potential design strategies of MXene@MOF hybrids, attributes of tunable properties in the resulting hybrids, and their applications in water treatment, sensing, electrochemical energy storage, smart textiles, and electrocatalysis. Comprehensive discussions on the recent efforts on rapidly evolving MXene@MOF materials for various applications and potential future directions are highlighted.

Smart Metal-Organic Frameworks for Biotechnological Applications: A Mini-Review

In this pandemic situation it is evident that viruses and bacteria, more specifically, multiple drug resistant (MDR) bacteria, endanger human civilization severely. It is high time to design smart weapons to combat these pathogens for the prevention and cure of allied ailments. Metal-organic frameworks (MOFs) are porous materials designed from metal ions or inorganic clusters and multidentate organic ligands. Due to some unique features like high porosity, tunable pore shape and size, numerous possible metal-ligand combinations, etc., MOFs are ideal candidates to design "smart biotechnological tools". MOFs construct promising fluorescence based biosensing platforms for detection of viruses. MOFs also exhibit excellent antibacterial activity due to their ability for sustained release of active biocidal agents. There are several reviews that summarize the antibacterial applications of MOFs, but the biosensing platforms based on MOFs for detection of viruses have scarcely been summarized. This review carefully covers both the aspects including virus detection (nucleic acid recognition and immunological detection) with underlying mechanisms as well as antibacterial application of MOFs and doped MOFs or composites. This review will deliver valuable information and references for designing new, smarter antimicrobial agents based on MOFs.

Three novel metal-organic frameworks with different coordination modes for trace detection of anthrax biomarkers

Dipicolinic acid (DPA) is an anthrax biomarker. Its serious consequences make its detection a great need. In this paper, three novel metal-organic frameworks (MOFs) with different coordination modes were synthesized by a simple solvothermal method, which can be used as highly efficient fluorescence sensors for the highly selective and sensitive trace detection of DPA. MOFs 1-3 showed rapid responses to DPA (<30 s), and the limits of detection (LODs) were calculated to be 1.01 × 10^-6 M^-1 (MOF 1), 1.17 × 10^-6 M^-1 (MOF 2) and 2.07 × 10^-6 M^-1 (MOF 3). DPA detection based on MOFs 1-3 in fetal bovine serum is highly reliable based on the high recovery rates (90% to 115%). Hence, the three MOF-based sensors can be used in the real-time detection of DPA.

Green construction of eco-friendly phosphotungstic acid Sr-MOF catalysts for crystal violet removal and synthesis of coumarin and xanthene compounds

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes. This reduces the contamination of toxic chemicals and helps the disposal of organic dyes. In the current work, a metal–organic framework-based Sr(ii) was fabricated to achieve the desired goal for dye removal and catalysis. Sr-MOF-based phosphotungstic acid (PWA/Sr-MOF) was hydrothermally synthesized to study its adsorption and catalytic activities. Remarkably, about 99.9% of crystal violet (CV) dye was removed using PWA/Sr-MOF within 90 min at room temperature. Various factors have been studied to investigate the optimum conditions such as pH of solution, initial dye concentration, contact time, and temperature. The maximum adsorption capacity of CV dye was reached after 90 min and well fitted the pseudo-second kinetic order and Langmuir adsorption isotherm. Coumarin and xanthene reactions were chosen to test the catalytic activity of the prepared PWA/Sr-MOF at 373 K. Furthermore, structural and chemical characterization of the fabricated samples was obtained using FT-IR, XRD, TGA, DTA, TEM, EDX, and XPS. PWA/Sr-MOF can be considered as a promising and green framework in the material design used to study catalytic and adsorption performances.

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes.

Toward sustainable syntheses of Ca-based MOFs

We report the use of benign and green precursors, including waste chicken eggshells and PET (polyethylene terephthalate) from recycled plastic bottles, for the facile synthesis of a variety of calcium-based metal-organic frameworks (Ca-MOFs), using water based and mechanochemical synthesis techniques.

Antioxidative Composites Based on Multienzyme Systems Encapsulated in Metal-Organic Frameworks

Skin is exposed to ultraviolet radiation from the sun constantly, which may induce overproduction of reactive oxygen species (ROS) causing oxidative stress to cells and tissues. Enzymes and small molecules work together to maintain the redox homeostasis, among which superoxide dismutase (SOD) and catalase (CAT) are two kinds of most important antioxidants that suffer from the fragile nature of proteins. Moreover, the proportion of two enzymes used in products must be precisely controlled to reduce the damage caused by the toxic intermediate H₂O₂. Metal-organic frameworks (MOFs) are emerging as promising candidates for multiple enzyme encapsulation due to their high porosity, easy synthesis, and good biocompatibility. Herein, we developed enzyme-MOF composites, SC@ZIF-8, which exhibited an excellent antioxidative activity in vitro. Chemically protective cages formed by MOFs endow the encapsulated enzymes the long-term stability under unnatural conditions in cosmetic and biomedical materials. The pH-dependent protein release profile of SC@ZIF-8 facilitated the successful delivery of enzymes into the cytoplasm to scavenge toxic ROS. The nanocomposites protected human cells from paraquat-induced oxidative stress, paving a new path for the stable and efficient application of antioxidative enzymes in cosmetic and dermatological fields.

Dual-ligated metal organic framework as novel multifunctional nanovehicle for targeted drug delivery for hepatic cancer treatment

In the last decade, nanosized metal organic frameworks (NMOFs) have gained an increasing applicability as multifunctional nanocarriers for drug delivery in cancer therapy. However, only a limited number of platforms have been reported that can serve as an effective targeted drug delivery system (DDSs). Herein, we report rational design and construction of doxorubicin (DOX)-loaded nanoscale Zr (IV)-based NMOF (NH2-UiO-66) decorated with active tumor targeting moieties; folic acid (FA), lactobionic acid (LA), glycyrrhetinic acid (GA), and dual ligands of LA and GA, as efficient multifunctional DDSs for hepatocellular carcinoma (HCC) therapy. The success of modification was exhaustively validated by various structural, thermal and microscopic techniques. Biocompatibility studies indicated the safety of pristine NH2-UiO-66 against HSF cells whereas DOX-loaded dual-ligated NMOF was found to possess superior cytotoxicity against HepG2 cells which was further confirmed by flow cytometry. Moreover, fluorescence microscopy was used for monitoring cellular uptake in comparison to the non-ligated and mono-ligated NMOF. Additionally, the newly developed dual-ligated NMOF depicted a pH-responsiveness towards the DOX release. These findings open new avenues in designing various NMOF-based DDSs that actively target hepatic cancer to achieve precise therapy.

Investigation on the optical nonlinearity of the layered magnesium-mediated metal organic framework (Mg-MOF-74)

The wavelength-related optical nonlinearities of few-layer Mg-MOF-74 nanosheets were investigated in the wavelength region around 1.08, 1.94, and 2.85 μm by the closed aperture Z-scan, open aperture Z-scan and I-scan method. Under the excitation of 100-μJ laser pulses, the nonlinear refractive index (n₂) of -7.7 ± 2.6, -131 ± 5 and 4.9 ± 0.2 cm²/W were obtained, respectively. The wavelength-related optical nonlinearity of the Mg-MOF-74 nanosheet was also investigated. In 2.85 μm wavelength region, the Mg-MOF-74 nanosheets shows a stable saturable absorption property with a modulation depth of 8% and a saturation intensity of 170 mJ/cm². In the 1.08 and 1.94 μm wavelength regions, we can observe that the Mg-MOF-74 transits from saturable absorption regime to reverse saturable absorption regime with the increasing incident laser intensity. Employed as a saturable absorber in a Er:Lu₂O₃ laser, Mg-MOF-74 nanosheet shows a thickness-related laser modulation performance. The shortest laser pulse of 284-ns was achieved under a repetition rate of 116 kHz with a 6-nm-thick Mg-MOF-74 nanosheet, which corresponds to a pulse energy of 3.2 µJ and a peak power of 11.4 W.

Characterization of an Isostructural MOF Series of Imidazolate Frameworks Potsdam by Means of Sorption Experiments with Water Vapor

Sorption measurements of water vapor on an isoreticular series of Imidazolate Frameworks Potsdam (IFP), based on penta-coordinated metal centers with secondary building units (SBUs) connected by multidentate amido-imidate-imidazolate linkers, have been carried out at 303.15 K. The isotherm shapes were analyzed in order to gain insight into material properties and compared to sorption experiments with nitrogen at 77.4 K and carbon dioxide at 273.15 K. Results show that water vapor sorption measurements are strongly influenced by the pore size distribution while having a distinct hysteresis loop between the adsorption and desorption branch in common. Thus, IFP-4 and -8, which solely contain micropores, exhibit H4 (type I) isotherm shapes, while those of IFP-1, -2 and -5, which also contain mesopores, are of H3 (type IV) shape with three inflection points. The choice of the used linker substituents and transition metals employed in the framework has a tremendous effect on the material properties and functionality. The water uptake capacities of the examined IFPs are ranging 0.48 mmol g^-1 (IFP-4) to 6.99 mmol g^-1 (IFP-5) and comparable to those documented for ZIFs. The water vapor stability of IFPs is high, with the exception of IFP-8.

Beyond structural motifs: the frontier of actinide-containing metal-organic frameworks

In this perspective, we feature recent advances in the field of actinide-containing metal-organic frameworks (An-MOFs) with a main focus on their electronic, catalytic, photophysical, and sorption properties. This discussion deviates from a strictly crystallographic analysis of An-MOFs, reported in several reviews, or synthesis of novel structural motifs, and instead delves into the remarkable potential of An-MOFs for evolving the nuclear waste administration sector. Currently, the An-MOF field is dominated by thorium- and uranium-containing structures, with only a few reports on transuranic frameworks. However, some of the reported properties in the field of An-MOFs foreshadow potential implementation of these materials and are the main focus of this report. Thus, this perspective intends to provide a glimpse into the challenges, triumphs, and future directions of An-MOFs in sectors ranging from the traditional realm of gas sorption and separation to recently emerging areas such as electronics and photophysics.

Quantum Mechanical Calculations for Biomass Valorization over Metal-Organic Frameworks (MOFs)

Metal-organic framework (MOF) in biomass valorization is a promising technology developed in recent decades. By tailoring both the metal nodes and organic ligands, MOFs exhibit multiple functionalities, which not only extend their applicability in biomass conversion but also increase the complexity of material designs. To address this issue, quantum mechanical simulations have been used to provide mechanistic insights into the catalysis of biomass-derived molecules, which could potentially facilitate the development of novel MOF-based materials for biomass valorization. The aim of this review is to survey recent quantum mechanical simulations on biomass reactions occurring in MOF catalysts, with the emphasis on the studies of the catalytic activity of active sites and the effects of organic ligand and porous structures on the kinetics. Moreover, different model systems and computational methods used for MOF simulations are also surveyed and discussed in this review.

Zr-MOF-808 as Catalyst for Amide Esterification

In this work, zirconium-based metal-organic framework Zr-MOF-808-P has been found to be an efficient and versatile catalyst for amide esterification. Comparing with previously reported homogeneous and heterogeneous catalysts, Zr-MOF-808-P can promote the reaction for a wide range of primary, secondary and tertiary amides with n-butanol as nucleophilic agent. Different alcohols have been employed in amide esterification with quantitative yields. Moreover, the catalyst acts as a heterogeneous catalyst and could be reused for at least five consecutive cycles. The amide esterification mechanism has been studied on the Zr-MOF-808 at molecular level by in situ FTIR spectroscopic technique and kinetic study.

Cu(II)-Containing Metal-Organic Framework with 1D Hexagonal Channels for Cyanosilylation Reaction and Anticancer Activity on Osteosarcoma Cells

A novel metal-organic framework (MOF) has been produced via Cu(NO₃)₂·6H₂O reaction with 3-(1H-tetrazol-5-yl)pyridine (HL) in water, and its chemical formula is {[(Cu(L)₂(H₂O)₂](H₂O)₈) _n } (1). Due to its high density of coordinately unsaturated sites along with large one-dimensional (1D) hexagonal channels, the activated complex 1 (1a) was explored as the solvent-free heterogeneous catalyst for cyanosilylation under mind conditions. The inhibitory function of compound 1a against the survival rate of OS-732 osteosarcoma cells was evaluated via Cell Counting Kit-8 (CCK-8) detection kit. Furthermore, the Annexin V-FITC/PI detection kit and the active oxygen (ROS) detection kit was carried out to determine the cell apoptosis levels and the ROS accumulation in OS-732 osteosarcoma cells after treatment by compound 1a.

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO₂. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO₂ gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO₂ and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO₂ does not require them to be defect-free, but solely continuous and overlapping growth.

Structural transformations of solid electrocatalysts and photocatalysts

Heterogeneous catalysts often undergo structural transformations when they operate under thermal reaction conditions. These transformations are reflected in their evolving catalytic activity, and a fundamental understanding of the changing nature of active sites is vital for the rational design of solid materials for applications. Beyond thermal catalysis, both photocatalysis and electrocatalysis are topical because they can harness renewable energy to drive uphill reactions that afford commodity chemicals and fuels. Although structural transformations of photocatalysts and electrocatalysts have been observed in operando, the resulting implications for catalytic behaviour are not fully understood. In this Review, we summarize and compare the structural evolution of solid thermal catalysts, electrocatalysts and photocatalysts. We suggest that well-established knowledge of thermal catalysis offers a good basis to understand emerging photocatalysis and electrocatalysis research.

Recent Advances in the Engineering of Single-Atom Catalysts Through Metal-Organic Frameworks

This mini-review highlights some recent progress in the engineering of single-atom catalysts (SACs) through metal-organic frameworks (MOFs) and derivatives. The inherent molecular and chemical specificities within the MOFs and derivatives can offer stabilisation of the SACs with high atomic isolation and dispersion. As MOFs are often considered an infinite array of self-assembled molecular catalysts, specifically designed structures can provide further functionalities to suit the needs of different catalytic applications. In brief, we can divide the preparation approaches into three main categories: (1) fabrication onto functional groups of the ligands, (2) fabrication onto Lewis acid sites of nodal centres, and (3) synthesis via a pyrolysis-mediated technique. Through these approaches, strong metal-support interactions can be established to aid the fine-tuning of the catalytic properties. We also discuss how recent progress in the development of state-of-the-art microscopic, spectroscopic, and crystallographic techniques has enabled scientists to elucidate the structure-activity relationship.

On the limit of proton-coupled electronic doping in a Ti(iv)-containing MOF

Ti^IV-containing metal–organic frameworks are known to accumulate electrons in their conduction bands, accompanied by protons, when irradiated in the presence of alcohols. The archetypal system, MIL-125, was recently shown to reach a limit of 2e⁻ per Ti₈ octomeric node. However, the origin of this limit and the broader applicability of this unique chemistry relies not only on the presence of Ti^IV, but also access to inorganic inner-sphere Lewis basic anions in the MOF nodes. Here, we study the loading of protons and electrons in MIL-125, and assess the thermodynamic limit of doping these materials. We find that the limit is determined by the reduction potential of protons: in high charging regimes the MOF exceeds the H⁺/H₂ potential. Generally, we offer the design principle that inorganic anions in MOF nodes can host adatomic protons, which may stabilize meta-stable low valent transition metals. This approach highlights the unique chemistry afforded by MOFs built from inorganic clusters, and provides one avenue to developing novel catalytic scaffolds for hydrogen evolution and transfer hydrogenation.

Photo-promoted doping of MIL-125 is limited by the potential of MOF-bound protons exceeding the hydrogen evolution reaction.

MOF based flexible, low-cost chemiresistive device as a respiration sensor for sleep apnea diagnosis

The monitoring of respiratory disorders requires breath sensors that are fast, robust, and convenient to use and can function under real time conditions. A MOF based flexible sensor is reported for the first time for breath sensing applications. The properties of a highly porous HKUST-1 MOF and a conducting MoS2 material have been combined to fabricate an electronic sensor on a flexible paper support for studying sleep apnea problems. Extensive breath sensing experiments have been performed and interestingly the fabricated sensor is efficient in detecting various kinds of breaths such as deep, fast, slow and hydrated breath. The MOF breath sensor shows a fast response time of just ∼0.38 s and excellent stability with no decline in its performance even after a month. A plausible mechanism has been proposed and a smartphone based prototype has been prepared to demonstrate the real time applications of the hybrid device. This work demonstrates great potential for the application of MOFs in healthcare with a special focus on breath sensing and sleep apnea diagnosis.

A Metal-Organic Framework Based on a Nickel Bis(dithiolene) Connector: Synthesis, Crystal Structure, and Application as an Electrochemical Glucose Sensor

Functionalizing the redox-active tetrathiafulvalene (TTF) core with groups capable of coordination to metals provides new perspectives on the modulation of architectures and electronic properties of organic-inorganic hybrid materials. With a view to extending this concept, we have now synthesized nickel bis(dithiolene-dibenzoic acid), [Ni(C2S2(C6H4COOH)2)2], which can be considered as the inorganic analogue of the organic tetrathiafulvalene-tetrabenzoic acid (H4TTFTB). Likewise, [Ni(C2S2(C6H4COOH)2)2] is a redox-active linker for new functional metal-organic frameworks, as demonstrated here with the synthesis of [Mn2{Ni(C2S2(C6H4COO)2)2}(H2O)2]·2DMF, (1, DMF = N,N-dimethylformamide). 1 is isomorphic to the reported [Mn2(TTFTB)(H2O)2] (2) but is a better electrochemical glucose sensor due to the multiple oxidation-reduction states of the [NiS4] core, which allow glucose to be oxidized to glucolactone by the high oxidation state [NiS4] center. As a non-enzymatic glucose sensor, 1 on Cu foam (CF), 1-CF, was synthesized by a one-step hydrothermal method and exhibited an excellent electrochemical performance. The fabricated 1-CF electrode offers a high sensitivity of 27.9 A M-1 cm-2, with a wide linear detection range from 2.0 × 10-6 to 2.0 × 10-3 M, a low detection limit of 1.0 × 10-7 M (signal/noise = 3), and satisfactory stability and reproducibility.

Architectural and catalytic aspects of designer materials built using metalloligands of pyridine-2,6-dicarboxamide based ligands

This perspective presents the design, synthesis and crystal structures of a large number of architectures constructed using assorted metalloligands of pyridine-2,6-dicarboxamide based ligands. The metalloligands offered various appended functional groups, whereas design strategies included varying both their position and number. A combination of these parameters resulted in the development of assorted architectures including discrete trinuclear and tetranuclear complexes as well as 1D/2D/3D coordination polymers. The metalloligand strategy not only assisted in the construction of ordered crystalline materials with varied dimensionalities but also judiciously allowed the incorporation of Lewis acidic and redox-active secondary metals in the resultant architectures. As a result, such designer architectures illustrated their noteworthy role both as homogenous and heterogeneous catalysts in different organic transformation reactions.

Copper Metal-Organic Framework Surface Catalysis: Catalyst Poisoning, IR Spectroscopic, and Kinetic Evidence Addressing the Nature and Number of the Catalytically Active Sites En Route to Improved Applications

The metal-organic framework (MOF) H₃[(Cu₄Cl)₃-(BTTri)₈, H₃BTTri = 1,3,5-tris(¹H-1,2,3-triazol-5-yl)benzene] (CuBTTri) is a precatalyst for biomedically relevant nitric oxide (NO) release from S-nitrosoglutathione (GSNO). The questions of the number and nature of the catalytically most active, kinetically dominant sites are addressed. Also addressed is whether or not the well-defined structural geometry of MOFs (as solid-state analogues of molecular compounds) can be used to generate specific, testable hypotheses about, for example, if intrapore vs exterior surface metal sites are more catalytically active. Studies of the initial catalytic rate vs CuBTTri particle external surface area to interior volume ratio show that intrapore copper sites are inactive within the experimental error (≤1.7 × 10^-5% of the observed catalytic activity)-restated, the traditional MOF intrapore metal site catalysis hypothesis is disproven for the current system. All observed catalysis occurs at exterior surface Cu sites, within the experimental error. Fourier transform infrared (FT-IR) analysis of CN^--poisoned CuBTTri reveals just two detectable Cu sites at a ca. ≥0.5% detection limit, those that bind three or one CN^- ("Cu(CN)₃" and "CuCN"), corresponding to the CN^- binding expected for exterior surface, 3-coordinate (Cu_surface) and intrapore, 5-coordinate (Cu_pore) sites predicted by the idealized, metal-terminated crystal structure. Two-coordinate Cu defect sites are ruled out at the ≥0.5% FT-IR detection limit as such defect sites would have been detectable by the FT-IR studies of the CN^--poisoned catalyst. Size-selective poisoning studies of CuBTTri exterior surface sites reveal that 1.3 (±0.4)% of total copper in 0.6 ± 0.4 μm particles is active. That counting of active sites yields a normalized turnover frequency (TOF), TOF_norm = (4.9 ± 1.2) × 10^-2 mol NO (mol Cu_surface)^-1 s^-1 (in water, at 20 min, 25 °C, 1 mM GSNO, 30% loss of GSNO, and 1.3 ± 0.4 mol % Cu_surface)-a value ∼100× higher than the TOF calculated without active site counting. Overall, Ockham's razor interpretation of the data is that exterior surface, Cu_surface sites are the catalytically most active sites present at a 1.3 (±0.4)% level of total Cu.

Structural Transitions of the Metal-Organic Framework DUT-49(Cu) upon Physi- and Chemisorption Studied by in Situ Electron Paramagnetic Resonance Spectroscopy

Flexible metal-organic frameworks (MOFs) exhibit a variety of phenomena attractive for basic and applied science. DUT-49(Cu) is one of the remarkable representatives of such MOFs, where phase transitions are coupled to pressure amplification and "negative gas adsorption". In this work we report important insights into structural transitions of DUT-49(Cu) upon physi- and chemisorption of gases and volatile liquids obtained by in situ electron paramagnetic resonance (EPR) spectroscopy. In this method, phase transitions are detected via the zero-field splitting in dimeric copper(II) units. First, a new approach was validated upon physisorption of n-butane. Then, using diethyl ether, we for the first time demonstrated that chemisorption can also trigger phase transition in DUT-49(Cu). On the basis of the EPR results, the transition appears completely reversible. The developed EPR-based approach can also be extended to other flexible MOFs containing paramagnetic metal paddlewheels, where high sensitivity and spectral resolution allow in situ studies of stimuli-induced structural variability.