Tetrabutylammonium decatungstate (TBADT), a compelling and trailblazing catalyst for visible-light-induced organic photocatalysis

Tetrabutylammonium decatungstate (TBADT) has recently emerged as an intriguing photocatalyst under visible-light or near-visible-light irradiation in a wide range of organic reactions that were previously not conceivable. Given its ability to absorb visible light and excellent effectiveness in activating unactivated chemical bonds, it is a promising addition to traditional photocatalysts. This review covers some of the contemporary developments in visible-light or near-visible-light photocatalysis reactions enabled by the TBADT catalyst to 2023, with the contents organized by reaction type.

Nickel/Photo-Cocatalyzed Three-Component Alkyl-Acylation of Aryl-Activated Alkenes

Herein, we disclose a nickel/photo-cocatalyzed three-component alkyl-acylation of aryl-substituted alkenes with aldehydes and electron-withdrawing-group-activated alkyl bromides, providing straightforward access to various ketones under mild and ligand-free conditions. The photocatalyst TBADT plays a dual role in activating the acyl C-H bond of aldehydes via hydrogen atom transfer and reducing the C-Br bond of alkyl bromides via single-electron transfer. While the terminal C-C bond is forged through polarity-matched radical-type addition, nickel is likely involved in the acylation step.

Asymmetric imino-acylation of alkenes enabled by HAT-photo/nickel cocatalysis

By merging nickel-mediated facially selective aza-Heck cyclization and radical acyl C-H activation promoted by tetrabutylammonium decatungstate (TBADT) as a hydrogen atom transfer (HAT) photocatalyst, we accomplish an asymmetric imino-acylation of oxime ester-tethered alkenes with readily available aldehydes as the acyl source, enabling the synthesis of highly enantioenriched pyrrolines bearing an acyl-substituted stereogenic center under mild conditions. Preliminary mechanistic studies support a Ni(i)/Ni(ii)/Ni(iii) catalytic sequence involving the intramolecular migratory insertion of a tethered olefinic unit into the Ni(iii)-N bond as the enantiodiscriminating step.

Transition-metal-catalyzed C-H bond alkylation using olefins: recent advances and mechanistic aspects

Transition metal catalysis has contributed immensely to C-C bond formation reactions over the last few decades, and alkylation is no exception. The superiority of such methodologies over traditional alkylation is evident from minimal reaction steps, shorter reaction times, and atom economy while also allowing control over regio- and stereo-selectivity. In particular, hydrocarbonation of alkenes has grabbed increased attention due its fundamental ability to effectively and selectively synthesise a wide range of industrially and pharmaceutically relevant moieties. This review attempts to provide a scientific viewpoint and a systematic analysis of the recent developments in transition-metal-catalyzed alkylation of various C-H bonds using simple and activated olefins. The key features and mechanistic studies involved in these transformations are described briefly.

New directions in radical carbonylation chemistry: combination with electron catalysis, photocatalysis and ring-opening

Radical carbonylation offers potent methods for introducing carbon monoxide into organic molecules. This feature article focuses on our current efforts to develop new strategies for radical carbonylation, which include electron-transfer carbonylation, site-selective C(sp³)-H carbonylation by a photocatalyst and ring-opening carbonylation.

A Polyniobotungstate-Based Hybrid for Visible-Light-Induced Phosphorylation of N-Aryl-Tetrahydroisoquinoline

A new organic-inorganic hybrid based on a Nb/W mixed-addendum polyoxometalate with the formula H₁₄[(Co(H₂O)₃)₂(C₁₀H₈N₂)₄(P₄W₃₀Nb₆O₁₂₃)]·4(C₁₀H₈N₂)·8H₂O (Co-POM) has been synthesized by the solvothermal method and characterized by single-crystal X-ray diffraction (XRD), powder X-ray diffraction (PXRD), elemental analysis, FTIR spectroscopy, UV-vis absorption spectrum, and thermogravimetric analysis (TGA). Importantly, visible-light-absorption peaks around 525 nm for Co-POM indicated that this material should have potential in visible-light-induced organic reactions. Herein, we disclosed visible-light-promoted phosphorylation of N-aryl-tetrahydroisoquinoline using Co-POM as an efficient heterogeneous photocatalyst. In this procedure, diverse phosphorus reagents are compatible at room temperature and in an O₂ atmosphere, giving the corresponding products in good to excellent yields (up to 97%). Simultaneously, this heterogeneous photocatalyst can be recycled up to ten times with a negligible decrease in yield, showing outstanding sustainability and recyclability.

Visible Light-Induced Transition Metal Catalysis

In recent years, visible light-induced transition metal catalysis has emerged as a new paradigm in organic photocatalysis, which has led to the discovery of unprecedented transformations as well as the improvement of known reactions. In this subfield of photocatalysis, a transition metal complex serves a double duty by harvesting photon energy and then enabling bond forming/breaking events mostly via a single catalytic cycle, thus contrasting the established dual photocatalysis in which an exogenous photosensitizer is employed. In addition, this approach often synergistically combines catalyst-substrate interaction with photoinduced process, a feature that is uncommon in conventional photoredox chemistry. This Review describes the early development and recent advances of this emerging field.

α-Functionalization of ketones promoted by sunlight and heterogeneous catalysis in the aqueous phase

Herein, a protocol that combines heterogeneous catalysis and solar photocatalysis for the regioselective α-substitution of asymmetric ketones with quinoxalinones has been reported. The result indicates that the reaction is more likely to occur on the α-carbon. This strategy provides a green and efficient way for the α-functionalization of ketones. A singlet oxygen involved mechanism is suggested for the transformation.

Experimental and Computational Studies on the Ruthenium-Catalyzed Dehydrative C-H Coupling of Phenols with Aldehydes for the Synthesis of 2-Alkylphenol, Benzofuran, and Xanthene Derivatives

The cationic Ru-H complex [(C₆H₆)(PCy₃)(CO)RuH]⁺BF₄^- (1) was found to be an effective catalyst for the dehydrative C-H coupling reaction of phenols and aldehydes to form 2-alkylphenol products. The coupling reaction of phenols with branched aldehydes selectively formed 1,1-disubstituted benzofurans, while the coupling reaction with salicylaldehydes yielded xanthene derivatives. A normal deuterium isotope effect was observed from the coupling reaction of 3-methoxyphenol with benzaldehyde and 2-propanol/2-propanol-d₈ (k_H/k_D = 2.3 ± 0.3). The carbon isotope effect was observed on the benzylic carbon of the alkylation product from the coupling reaction of 3-methoxyphenol with 4-methoxybenzaldehyde (C(3) 1.021(3)) and on both benzylic and ortho-arene carbons from the coupling reaction with 4-trifluorobenzaldehdye (C(2) 1.017(3), C(3) 1.011(2)). The Hammett plot from the coupling reaction of 3-methoxyphenol with para-substituted benzaldehydes p-X-C₆H₄CHO (X = OMe, Me, H, F, Cl, CF₃) displayed a V-shaped linear slope. Catalytically relevant Ru-H complexes were observed by NMR from a stoichiometric reaction mixture of 1, 3-methoxyphenol, benzaldehyde, and 2-propanol in CD₂Cl₂. The DFT calculations provided a detailed catalysis mechanism featuring an electrophilic aromatic substitution of the aldehyde followed by the hydrogenolysis of the hydroxy group. The calculations also revealed a mechanistic rationale for the strong electronic effect of the benzaldehdye substrates p-X-C₆H₄CHO (X = OMe, CF₃) in controlling the turnover-limiting step. The catalytic C-H coupling method provides an efficient synthetic protocol for 2-alkylphenols, 1,1-disubstituted benzofurans, and xanthene derivatives without employing any reactive reagents or forming wasteful byproducts.

Iron-Catalyzed C(sp3)–H Alkylation through Ligand-to-Metal Charge Transfer

We report the FeCl3-catalyzed alkylation of nonactivated C(sp3)–H bonds. Photoinduced ligand-to-metal charge transfer at the iron center generates chlorine radicals that then preferentially abstract hydrogen atoms from electron-rich C(sp3)–H bonds distal to electron-withdrawing functional groups. The resultant alkyl radicals are trapped by electron-deficient olefins, and the catalytic cycle is closed by Fe(II) recombination and protodemetalation.

Direct Photocatalyzed Hydrogen Atom Transfer (HAT) for Aliphatic C-H Bonds Elaboration

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PC_HAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCs_HAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

A computational study of site-selective hydrogen abstraction by sulfate radical anion

Many hydrogen abstraction reactions on sp3 carbons with oxyradicals take place site-selectively (regioselectively). To investigate this selectivity, ab initio and density functional theory (DFT) calculations were carried out using cyclopentanone and SO4-˙ as the substrate and oxyradical, respectively. At the ωB97XD/6-311+G(d,p) level, the energy barriers for the forward process (ΔE1‡) of both α- and β-hydrogen abstraction were predicted to be 54.6 and 50.9 kJ mol-1, respectively. Consideration of solvent effects (acetonitrile) decreased these energy barriers to 33.2 and 26.1 kJ mol-1, respectively. These calculation outcomes suggested that β-hydrogen abstraction would be favourable, which supports experimental findings (i.e. β-selective abstraction). At the ωB97XD level, investigations into hydrogen abstraction from cyclohexanone with SO4-˙ confirmed the regioselectivity observed experimentally. Hydrogen abstractions from 2-propylpyridine and 3-methyl-1-butanol using SO4-˙, which are unknown reactions, were also calculated using the DFT method, and the predicted regioselectivity was consistent with that in the known reactions using tetrabutylammonium decatungstate (TBADT). In addition, regioselectivities in unexplored hydrogen abstractions of cyclopentanone by several oxyradicals were predicted. Natural bond orbital (NBO) analysis carried out at the ωB97XD level indicated that the transferred hydrogen atom is partially positively charged when abstracted by an oxyradical. Interestingly, hydrogens bonded to the most positively charged carbon in the substrate were predominantly abstracted by oxyradicals in practice, which should be a simple compass for predicting regioselectivity in the functionalisation of C(sp3)-H bonds with oxyradicals.

A blueprint for green chemists: lessons from nature for sustainable synthesis

The design of new chemical reactions that are convenient, sustainable, and innovative is a preeminent concern for modern synthetic chemistry. While the use of earth abundant element catalysts remains underdeveloped by chemists, nature has developed a cornucopia of powerful transformation using only base metals, demonstrating their viability for sustainable method development. Here we show how study of nature’s approach to disparate chemical problems, from alkene desaturation to photodetection in bacteria, can inspire and enable new approaches to difficult synthetic chemistry problems past, present, and future.

Light-Promoted Organic Transformations Utilizing Carbon-Based Gas Molecules as Feedstocks

Carbon-based gas molecules are readily available feedstocks and are widely used in industry as building blocks or fuels. However, their application in the synthesis of fine chemicals has been hampered due to operational complexity, poor reaction efficiency and selectivity. Recent development of photoredox-promoted transformations using such gaseous reagents has received considerable attention from the synthetic community. In this review, efforts in developing light-promoted organic transformations using carbon-based natural gases as C1 or C2 feedstocks and to overcome the associated challenges are briefly summarized.

Site-Selective Alkenylation of Unactivated C(sp3 )-H Bonds Mediated by Compact Sulfate Radical

A broad variety of unactivated acyclic and alicyclic substrates cleanly undergo site-selective alkenylation of unactivated C(sp³ )-H bonds with 1,2-bis(phenylsulfonyl)ethene in the presence of persulfate. This simple transformation furnishes (E)-2-alkylvinylphenylsulfones in up to 88 % yield. In contrast with the previously reported decatungstate protocol, the current method is applicable to alkenylation of sterically hindered C-H bonds. This important advantage significantly broadens the substrate scope, and is attributed to the compact size of the sulfate radical employed in the C-H activation and cleavage.

Copper Catalyzed C(sp3)-H Bond Alkylation via Photoinduced Ligand-to-Metal Charge Transfer

Utilizing catalytic CuCl₂ we report the functionalization of numerous feedstock chemicals via the coupling of unactivated C(sp³)-H bonds with electron-deficient olefins. The active cuprate catalyst undergoes Ligand-to-Metal Charge Transfer (LMCT) to enable the generation of a chlorine radical which acts as a powerful hydrogen atom transfer reagent capable of abstracting strong electron-rich C(sp³)-H bonds. Of note is that the chlorocuprate catalyst is an exceedingly mild oxidant (0.5 V vs SCE) and that a proposed protodemetalation mechanism offers a broad scope of electron-deficient olefins, offering high diastereoselectivity in the case of endocyclic alkenes. The coupling of chlorine radical generation with Cu reduction through LMCT enables the generation of a highly active HAT reagent in an operationally simple and atom economical protocol.

Sunlight-mediated [3 + 2] cycloaddition of azobenzenes with arynes: an approach toward the carbazole skeleton

A mild sunlight-mediated [3 + 2] cycloaddition of azobenzenes with arynes has been established for the construction of the carbazole backbone.

The sunlight-promoted aerobic selective cyclization of olefinic amides and diselenides

A novel sunlight-promoted approach for the selective synthesis of selenated iminoisobenzofurans or isoindolinones via the aerobic O-cyclization or N-cyclization of olefinic amides with diselenides has been developed.

The Mizoroki–Heck reaction initiated formal C(sp3)–H arylation of carbonyl compounds

This work described a Mizoroki–Heck reaction initiated formal C(sp3)–H arylation of α-methylcinnamaldehydes under phosphane-free conditions.

Generation of Alkyl Radicals: From the Tyranny of Tin to the Photon Democracy

Alkyl radicals are key intermediates in organic synthesis. Their classic generation from alkyl halides has a severe drawback due to the employment of toxic tin hydrides to the point that "flight from the tyranny of tin" in radical processes was considered for a long time an unavoidable issue. This review summarizes the main alternative approaches for the generation of unstabilized alkyl radicals, using photons as traceless promoters. The recent development in photochemical and photocatalyzed processes enabled the discovery of a plethora of new alkyl radical precursors, opening the world of radical chemistry to a broader community, thus allowing a new era of photon democracy.

Photosensitized direct C-H fluorination and trifluoromethylation in organic synthesis

The importance of fluorinated products in pharmaceutical and medicinal chemistry has necessitated the development of synthetic fluorination methods, of which direct C-H fluorination is among the most powerful. Despite the challenges and limitations associated with the direct fluorination of unactivated C-H bonds, appreciable advancements in manipulating the selectivity and reactivity have been made, especially via transition metal catalysis and photochemistry. Where transition metal catalysis provides one strategy for C-H bond activation, transition-metal-free photochemical C-H fluorination can provide a complementary selectivity via a radical mechanism that proceeds under milder conditions than thermal radical activation methods. One exciting development in C-F bond formation is the use of small-molecule photosensitizers, allowing the reactions i) to proceed under mild conditions, ii) to be user-friendly, iii) to be cost-effective and iv) to be more amenable to scalability than typical photoredox-catalyzed methods. In this review, we highlight photosensitized C-H fluorination as a recent strategy for the direct and remote activation of C-H (especially C(sp3)-H) bonds. To guide the readers, we present the developing mechanistic understandings of these reactions and exemplify concepts to assist the future planning of reactions.

Luminescent tungsten(vi) complexes as photocatalysts for light-driven C-C and C-B bond formation reactions

The realization of photocatalysis for practical synthetic application hinges on the development of inexpensive photocatalysts which can be prepared on a large scale. Herein an air-stable, visible-light-absorbing photoluminescent tungsten(vi) complex which can be conveniently prepared at the gram-scale is described. This complex could catalyse photochemical organic transformation reactions including borylation of aryl halides, such as aryl chloride, reductive coupling of benzyl bromides for C-C bond formation, reductive coupling of phenacyl bromides, and decarboxylative coupling of redox-active esters of alkyl carboxylic acid with high product yields and broad functional group tolerance.

One-Pot Formal Dehydrogenative Ketone Synthesis from Aldehydes and Non-activated Hydrocarbons

Ketones are a fundamental functionality found throughout a range of natural and synthetic compounds, making their synthesis essential throughout the chemical disciplines. Herein, we describe a one-pot synthesis of ketones via decatungstate-mediated formal dehydrogenative coupling between aldehydes and non-activated hydrocarbons. A variety of substituted benzaldehydes and cycloalkanes could be used in the optimized reaction to produce the desired ketones in moderate yields. The decatungstate photocatalyst functions in two reactions in this synthesis, catalyzing both the coupling and oxidation steps of the process. Notably, the reaction displays both high atom economy and sustainability, as it uses light and oxygen as key energy sources.

Cerium-Catalyzed C-H Functionalizations of Alkanes Utilizing Alcohols as Hydrogen Atom Transfer Agents

Modern photoredox catalysis has traditionally relied upon metal-to-ligand charge-transfer (MLCT) excitation of metal polypyridyl complexes for the utilization of light energy for the activation of organic substrates. Here, we demonstrate the catalytic application of ligand-to-metal charge-transfer (LMCT) excitation of cerium alkoxide complexes for the facile activation of alkanes utilizing abundant and inexpensive cerium trichloride as the catalyst. As demonstrated by cerium-catalyzed C-H amination and the alkylation of hydrocarbons, this reaction manifold has enabled the facile use of abundant alcohols as practical and selective hydrogen atom transfer (HAT) agents via the direct access of energetically challenging alkoxy radicals. Furthermore, the LMCT excitation event has been investigated through a series of spectroscopic experiments, revealing a rapid bond homolysis process and an effective production of alkoxy radicals, collectively ruling out the LMCT/homolysis event as the rate-determining step of this C-H functionalization.

Photocatalytic hydroacylation of trifluoromethyl alkenes

Hydrofunctionalization of trifluoromethyl alkenes is highly challenging, because the nucleophilic addition is oftentimes followed by β-F elimination in this case. By the use of tetrabutylammonium decatungstate (TBADT) as a hydrogen-atom-transfer (HAT) photocatalyst for acyl C-H activation, we successfully avoid the β-F elimination in the hydroacylation of trifluoromethyl alkenes with aldehydes. This light (390 nm) promoted reaction provides a facile and efficient access to various β-CF3 ketones in complete regiocontrol with high functionality tolerance and 100% atom economy.

Site-Selective α-Alkoxyl Alkynation of Alkyl Esters Mediated by Boryl Radicals

A novel method for site-selective C-H functionalization of ethyl acetate mediated by pyridine-boryl radicals is presented, delivering a variety of 4-phenylbut-3-yn-2-yl acetate derivatives under mild conditions. A distinguishing feature of this reaction is that the pyridine-ligated boryl radicals can abstract the inactive α-hydrogen of the alkoxyl group instead of the α-hydrogen of carbonyl groups described in a previous report using amine-ligated boryl radicals. Significantly, substrates with halogen atoms are compatible under the reaction conditions.