Structural determinants in a library of low molecular weight gelators

Transparent Organogels as a Medium for the Light-Induced Conversion from Spiropyran to Merocyanine

Low-molecular-weight peptide gelators are a versatile class of compounds able to form gels under a variety of conditions, even via simple ultrasound sonication. In this paper, the ability of Boc-L-Phe-D-Oxd-L-Phe-OBn to gelate three organic solvents (toluene, tert-butyl methyl ether, and ethanol) was evaluated. The rheological behaviour of the materials was assessed via strain sweep analysis, while the fibrous network was analysed via optical microscopy on the wet gels. The gel obtained from toluene is a highly transparent material, and the one from ethanol appears translucent, while the one from tert-butyl methyl ether is opaque. These gels were used to study the reversible light-induced transformation from spyropiran (SP) to merocyanine (MC) and back, as a model system to check the effect of the gel medium onto the rection kinetic. We observed that the solvent used to form the organogels has a crucial effect on the reaction, as gels from aprotic solvents stabilize the SP form, while the ones from protic solvents stabilize the MC form. We thus obtained a solid support to stabilize the two photochromic species just by changing the solvent polarity. Moreover, we could demonstrate that the self-assembled gels do not interfere with the light-driven conversion process, either starting from SP or MC, thus representing a valid and economical photochromic material.

Molecular dynamics study of low molecular weight gel forming salt-triggered dipeptide

Molecular dynamics simulation method was used to study the aggregation of Na and Ca salts in different concentrations of Naphthalene-dipeptide (2NapFF) solutions. The results show that high-valence Ca2+ triggers the formation of a gel at a certain dipeptide concentration, and the low-valence Na+ system follows the aggregation law of general surfactants. The results also show that hydrophobic and electrostatic forces are the main driving forces for the formation of dipeptide aggregates, and that hydrogen bonds do not play a major role in the formation of dipeptide solution aggregates. Hydrophobic and electrostatic effects are the main driving forces for the formation of gels in dipeptide solutions triggered by Ca2+. Electrostatic attraction drives Ca2+ to form a weak coordination with four oxygen atoms on two carboxyl groups, which causes the dipeptide molecules to form a gel with a branched network structure.

Self-Assembly, Bioactivity, and Nanomaterials Applications of Peptide Conjugates with Bulky Aromatic Terminal Groups

The self-assembly and structural and functional properties of peptide conjugates containing bulky terminal aromatic substituents are reviewed with a particular focus on bioactivity. Terminal moieties include Fmoc [fluorenylmethyloxycarbonyl], naphthalene, pyrene, naproxen, diimides of naphthalene or pyrene, and others. These provide a driving force for self-assembly due to π-stacking and hydrophobic interactions, in addition to the hydrogen bonding, electrostatic, and other forces between short peptides. The balance of these interactions leads to a propensity to self-assembly, even for conjugates to single amino acids. The hybrid molecules often form hydrogels built from a network of β-sheet fibrils. The properties of these as biomaterials to support cell culture, or in the development of molecules that can assemble in cells (in response to cellular enzymes, or otherwise) with a range of fascinating bioactivities such as anticancer or antimicrobial activity, are highlighted. In addition, applications of hydrogels as slow-release drug delivery systems and in catalysis and other applications are discussed. The aromatic nature of the substituents also provides a diversity of interesting optoelectronic properties that have been demonstrated in the literature, and an overview of this is also provided. Also discussed are coassembly and enzyme-instructed self-assembly which enable precise tuning and (stimulus-responsive) functionalization of peptide nanostructures.

Controlling supramolecular filament chirality of hydrogel by co-assembly of enantiomeric aromatic peptides

Supramolecular chirality plays an indispensable role in living and synthetic systems. However, the generation and control of filament chirality in the supramolecular hydrogel of short peptides remains challenging. In this work, as the first example, we report that the heterodimerization of the enantiomeric mixture controls the alignment, chirality, and stiffness of fibrous hydrogels formed by aromatic building blocks. The properties of the resulting racemic hydrogel could not be achieved by either pure enantiomer. Cryo-EM images indicate that the mixture of L and D enantiomers forms chiral nanofibers, the percentage of which can be readily controlled through stoichiometric co-assembly of heterochiral enantiomers. 2D NOESY NMR and diffusion-ordered NMR spectroscopy reveal that heterodimerization of enantiomers plays a crucial role in the formation of chiral nanofibers. Further mechanistic studies unravel the mechanism of supramolecular chirality formation in this two-component system. Molecular dynamics simulations confirm that the intermolecular hydrogen bond and π–π interaction of heterodimers play important roles in forming a chiral hydrogel. Furthermore, regulation of the adhesion and morphology of mammalian cells is achieved by tuning the relative ratio of L and D enantiomers at the same concentration. This work illustrates a novel strategy to control the supramolecular chirality of aromatic peptide hydrogels for materials science.

Self-assembled di- and tripeptide gels for the passive entrapment and pH-responsive, sustained release of an antidiabetic drug, glimepiride

Diabetes is a global epidemic that poses a severe challenge to public health. The characteristic features of this disease are hyperglycemia and deterioration of the function of pancreatic β-cells, which...

Surface-controlled spatially heterogeneous physical properties of a supramolecular gel with homogeneous chemical composition

Controlling supramolecular self-assembly across multiple length scales to prepare gels with localised properties is challenging. Most strategies concentrate on fabricating gels with heterogeneous components, where localised properties are generated by the stimuli-responsive component. Here, as an alternative approach, we use a spiropyran-modified surface that can be patterned with light. We show that light-induced differences in surface chemistry can direct the bulk assembly of a low molecular weight gelator, 2-NapAV, meaning that mechanical gel properties can be controlled by the surface on which the gel is grown. Using grazing incidence X-ray diffraction and grazing incidence small angle X-ray scattering, we demonstrate that the origin of the different gel properties relates to differences in the architectures of the gels. This provides a new method to prepare a single domain (i.e., chemically homogeneous) hydrogel with locally controlled (i.e., mechanically heterogeneous) properties.

Self-Assembly of Peptide Hierarchical Helical Arrays with Sequence-Encoded Circularly Polarized Luminescence

Self-assembled peptide materials with sequence-encoded properties have attracted great interest. Despite their intrinsic chirality, the generation of circularly polarized luminescence (CPL) based on the self-assembly of simple peptides has been rarely reported. Here, we report the self-assembly of peptides into hierarchical helical arrays (HHAs) with controlled supramolecular handedness. The HHAs can emit full-color CPL signals after the incorporation of various achiral fluorescent molecules, and the g_lum value is 40 times higher than that of the CPL signal from the solutions. By simply changing the amino acid sequence of the peptides, CPL signals with opposite handedness can be generated within the HHAs. The peptide HHAs can provide hydrophobic pockets to accommodate the fluorescent molecules with helical arrangement through strong aromatic stacking interactions, which are responsible for the CPL signals. This work provides a pathway to construct highly ordered chiral materials, which have broad applications in the chiroptical field.

Enzymatically Forming Cell Compatible Supramolecular Assemblies of Tryptophan-Rich Short Peptides

Here we report a new type of tryptophan-rich short peptides, which act as hydrogelators, form supramolecular assemblies via enzymatic dephosphorylation, and exhibit cell compatibility. The facile synthesis of the peptides starts with the production of phosphotyrosine, then uses solid phase peptide synthesis (SPPS) to build the phosphopeptides that contain multiple tryptophan residues. Besides exhibiting excellent solubility, these phosphopeptides, unlike the previously reported cytotoxic phenylalanine-rich phosphopeptides, are largely compatible toward mammalian cells. Our preliminary mechanistic study suggests that the tryptophan-rich peptides, instead of forming pericellular assemblies, largely accumulate in lysosomes. Such lysosomal localization may account for their cell compatibility. Moreover, these tryptophan-rich peptides are able to transiently reduce the cytotoxicity of phenylalanine-rich peptide assemblies. This rather unexpected result implies that tryptophan may act as a useful aromatic building block for developing cell compatible supramolecular assemblies for soft materials and find applications for protecting cells from cytotoxic peptide assemblies.

The aging effect on the enhancement of thermal stability, mechanical stiffness and fluorescence properties of histidine-appended naphthalenediimide based two-component hydrogels

A histidine attached naphthalenediimide (NDI)-containing amphiphilic molecule (NDIP) self-assembles into nanotubes in aqueous solution at pH 6.6 as revealed by high-resolution transmission electron microscopy studies. This histidine-appended NDI forms a two-component hydrogel in the presence of tartaric acid at a molar ratio of 1 : 2. A morphological transformation was observed from a nanotube structure in the non-gel aggregated state of histidine appended NDI to interconnected cross-linked nanofibers of the two-component hydrogel in the presence of tartaric acid. Interestingly, the gel exhibits an unusual behavior upon aging compared to the fresh gel. It is found that the thermal stability and gel stiffness increase very significantly upon aging. Another important feature noted is that the very weak fluorescence of the fresh gel is transformed into bright greenish fluorescence upon aging. These results suggest that intermolecular interactions among the gelator molecules and tartaric acid in the gel phase slowly increase with time to form a mechanically very stiff and thermally robust gel.

Dehydropeptide-based plasmonic magnetogels: a supramolecular composite nanosystem for multimodal cancer therapy

Supramolecular hydrogels are highly promising candidates as biomedical materials owing to their wide array of properties, which can be tailored and modulated. Additionally, their combination with plasmonic/magnetic nanoparticles to form plasmonic magnetogels further improves their potential in biomedical applications through the combination of complementary strategies, such as photothermia, magnetic hyperthermia, photodynamic therapy and magnetic-guided drug delivery. Here, a new dehydropeptide hydrogelator, Npx-l-Met-Z-ΔPhe-OH, was developed and combined with two different plasmonic/magnetic nanoparticle architectures, i.e., core/shell manganese ferrite/gold nanoparticles and gold-decorated manganese ferrite nanoparticles with ca. 55 nm and 45 nm sizes, respectively. The magnetogels were characterized via HR-TEM, FTIR spectroscopy, circular dichroism and rheological assays. The gels were tested as nanocarriers for a model antitumor drug, the natural compound curcumin. The incorporation of the drug in the magnetogel matrices was confirmed through fluorescence-based techniques (FRET, fluorescence anisotropy and quenching). The curcumin release profiles were studied with and without the excitation of the gold plasmon band. The transport of curcumin from the magnetogels towards biomembrane models (small unilamellar vesicles) was assessed via FRET between the fluorescent drug and the lipid probe Nile Red. The developed magnetogels showed promising results for photothermia and photo-triggered drug release. The magnetogels bearing gold-decorated nanoparticles showed the best photothermia properties, while the ones containing core/shell nanoparticles had the best photoinduced curcumin release.

Controlling the Assembly and Properties of Low-Molecular-Weight Hydrogelators

Low-molecular-weight gels are formed by the self-assembly of small molecules into fibrous networks that can immobilize a significant amount of solvent. Here, we focus on our work with a specific class of gelator, the functionalized dipeptide. We discuss the current state of the art in the area, focusing on how these materials can be controlled. We also highlight interesting and unusual observations and unanswered questions in the field.

Protein-induced low molecular weight hydrogelator self-assembly through a self-sustaining process

Controlling how, when and where a self-assembly process occurs is essential for the design of the next generation of smart materials. Along this route, enzyme-assisted self-assembly is a powerful tool developed during the last decade. Here we introduce another strategy allowing for spatiotemporal control over peptide self-assemblies. We use a Fmoc-peptide precursor in dynamic equilibrium with its low molecular weight hydrogelator (LMWH) through a reversible disulfide bond. In the absence of proteins, no self-assembly of the hydrogelator is observed. In the presence of proteins, their interactions with the precursor initiate a self-assembly process of the hydrogelator around them. This self-assembly displaces the equilibrium between precursor and LMWH according to Le Chatelier's principle, producing new hydrogelators available to pursue the self-assembly growth. One thus establishes a self-sustaining cycle fuelled by the self-assembly itself until full consumption of the LMWH. For proteins in solutions this process can lead to a supramolecular hydrogel whereas for proteins deposited on a surface, the gel growth is initiated exclusively from the surface.

Identifying the Coiled-Coil Triple Helix Structure of β-Peptide Nanofibers at Atomic Resolution

Peptide self-assembly represents a powerful bottom-up approach to the fabrication of nanomaterials. β³-Peptides are non-natural peptides composed entirely of β-amino acids, which have an extra methylene in the backbone, and we reported fibers derived from the self-assembly of β³-peptides that adopt 14-helical structures. β³-Peptide assemblies represent a class of stable nanomaterials that can be used to generate bio- and magneto-responsive materials with proteolytic stability. However, the three-dimensional structure of many of these materials remains unknown. To develop structure-based criteria for the design of β³-peptide-based biomaterials with tailored function, we investigated the structure of a tri-β³-peptide nanoassembly by molecular dynamics simulations and X-ray fiber diffraction analysis. Diffraction data was collected from aligned fibrils formed by Ac-β³[LIA] in water and used to inform and validate the model structure. Models with 3-fold radial symmetry resulted in stable fibers with a triple-helical coiled-coil motif and measurable helical pitch and periodicity. The fiber models revealed a hydrophobic core and twist along the fiber axis arising from a maximization of contacts between hydrophobic groups of adjacent tripeptides on the solvent-exposed fiber surface. These atomic structures of macroscale fibers derived from β³-peptide-based materials provide valuable insight into the effects of the geometric placement of the side chains and the influence of solvent on the core fiber structure which is perpetuated in the superstructure morphology.

Broad-Spectrum Antibacterial Activity of Proteolytically Stable Self-Assembled αγ-Hybrid Peptide Gels

Bacterial infections pose a serious threat to mankind, and there is immense interest in the design and development of self-assembled peptide gels using ultrashort peptides for antibacterial applications. The peptide gels containing natural amino acids suffer from poor stability against proteolytic enzymes. Therefore, there is a need to design and develop peptide gels with improved stability against proteolytic enzymes. In the present work, we report the synthesis and characterization of α/γ hybrid peptides Boc-D-Phe-γ⁴-L-Phe-PEA (NH007) and Boc-L-Phe-γ⁴-L-Phe-PEA (NH009) to improve the proteolytic stability. Both of the dipeptides were found to self-assemble into gels in aqueous DMSO (3-5% w/v), and the self-assembly process was studied using FTIR and CD, which indicated antiparallel β-sheet formation with random coils in NH007 gels and random or unordered conformation in NH009. The rheological studies indicated viscoelastic characteristics for both gels; the storage modulus ( G') for NH007 and NH009 gels (3% w/v) was estimated as 0.2 and 0.5 MPa, higher than the loss modulus ( G''). Also, both gels demonstrated self-healing characteristics for six consecutive cycles when subjected to varying strains of 0.1 and 30% (200 s each). The peptide gels were incubated with a mocktail of proteolytic enzymes, proteinase K, pepsin, and chymotrypsin, and stability was monitored using RP HPLC. Up to 23 and 40% degradation was observed for NH007 (3%, w/v) in 24 and 36 h, and 77 and 94% degradation was observed for NH009 (3%, w/v), within the same period. Thus α/γ hybrid peptide gels containing D-Phe exhibited higher stability than gels fabricated using L-Phe. The use of D-residue in α/γ hybrid peptide significantly enhanced the stability of peptides against proteolytic enzymes, as the stability data reported in this work are possibly the best in class. Both peptide gels exhibited broad-spectrum antibacterial activity against Gram-negative and Gram-positive bacteria, such as Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, and Staphylococcus aureus. The Pseudomonas aeruginosa and Staphylococcus aureus, in particular, are known to develop resistance. The NH007 (3%, w/v) demonstrated 65% inhibition, whereas NH009 (3%, w/v) showed 78% inhibition, with potent activity against Pseudomonas aeruginosa. Mechanistic studies, using SEM, HR-TEM, and bacterial live-dead assay, indicated entrapment of bacteria in gel networks, followed by interaction with cell membrane components and lysis. Cell viability (MTT assay) and toxicity (LDH assay) studies showed that both gels are not toxic to NIH 3T3 mouse embryonic fibroblast cells (mammalian). MTT assay showed >85% cell viability, and LDH assay exhibited not more than 15% cytotoxicity, even at higher concentrations (5%, w/v) and prolonged exposures (48 h). Overall, studies indicate the potential application of gels developed from the α/γ hybrid peptides in preventing biomaterial-related infections.

Enzymatically-stable oxetane-based dipeptide hydrogels

A new Fmoc-protected dipeptide incorporating an oxetane ring as a surrogate for the amide carbonyl group is an effective gelator.

Towards a fragment-based approach in gelator design: halogen effects leading to thixotropic, mouldable and self-healing systems in aryl-triazolyl amino acid-based gelators!

A simple replacement of a H atom by Br transformed non-gelating aryl triazolyl amino acid benzyl ester to a versatile gelator, which formed shape-persistent, self-healing and mouldable gels.

The effect ofl-DOPA hydroxyl groups on the formation of supramolecular hydrogels

Fmoc-l-DOPA-d-Oxd-OH was prepared starting from commercially availablel-DOPA. Its gelation ability was tested by comparison with Fmoc-l-Tyr-d-Oxd-OH and Fmoc-l-Phe-d-Oxd-OH using ten different triggers.

Self-assembled chiral helical nanofibers by amphiphilic dipeptide derived from d- or l-threonine and application as a template for the synthesis of Au and Ag nanoparticles

The discovery of a class of self-assembling peptides that spontaneously undergo self-organization into well-ordered structures opened a new avenue for molecular fabrication of biological materials. In this paper, the structure controlled helical nanofibers were prepared by two artificial β-sheet dipeptides with long alkyl chains derived from l- and d-threonine (Thr) and sodium hydroxide (NaOH). These helical nanofibers have been characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), circular dichroism (CD), Fourier transform infrared (FT-IR) spectroscopy, and X-ray powder diffraction (XRD). It was demonstrated that the helicity of the nanofibers could be easily controlled by changing the chirality of the constituent amino acids in the peptide species (d- or l-threonine). Moreover, the hydrogen bonding interactions between the amide groups as well as the hydrophobic interactions among the alkyl chains play important roles in the self-assembly process. It also can be observed that with the passage of time, the hydrogen bonding interactions between the individual nanofiber induced the conversion from nanofibers to nanobelts. Particularly, gold and silver nanoparticles performed good catalytic ability were synthesized using the assembled nanofibers as template.

Substituent interference on supramolecular assembly in urea gelators: synthesis, structure prediction and NMR

Eighteen N-aryl-N'-alkyl urea gelators were synthesised in order to understand the effect of head substituents on gelation performance. Minimum gelation concentration values obtained from gel formation studies were used to rank the compounds and revealed the remarkable performance of 4-methoxyphenyl urea gelator 15 in comparison to 4-nitrophenyl analogue 14, which could not be simply ascribed to substituent effects on the hydrogen bonding capabilities of the urea protons. Crystal structure prediction calculations indicated alternative low energy hydrogen bonding arrangements between the nitro group and urea protons in gelator 14, which were supported experimentally by NMR spectroscopy. As a consequence, it was possible to relate the observed differences to interference of the head substituents with the urea tape motif, disrupting the order of supramolecular packing. The combination of unbiased structure prediction calculations with NMR is proposed as a powerful approach to investigate the supramolecular arrangement in gel fibres and help understand the relationships between molecular structure and gel formation.

Linking micellar structures to hydrogelation for salt-triggered dipeptide gelators

Some functionalised dipeptides can form hydrogels when salts are added to solutions at high pH. We have used surface tension, conductivity, rheology, optical, confocal and scanning electron microscopy, (1)H NMR and UV-Vis spectroscopy measurements to characterise fully the phase behaviour of solutions of one specific gelator, 2NapFF, at 25 °C at pH 10.5. We show that this specific naphthalene-dipeptide undergoes structural transformations as the concentration is increased, initially forming spherical micelles, then worm-like micelles, followed by association of these worm-like micelles. On addition of a calcium salt, gels are generally formed as long as worm-like micelles are initially present in solution, although there are structural re-organisations that occur at lower concentrations, allowing gelation at lower than expected concentration. Using IR and SANS, we show the differences between the structures present in the solution and hydrogel phases.

A Peptide-Based Mechano-sensitive, Proteolytically Stable Hydrogel with Remarkable Antibacterial Properties

A long-chain amino acid containing dipeptide has been found to form a hydrogel in phosphate buffer whose pH ranges from 6.0 to 8.8. The hydrogel formed at pH 7.46 has been characterized by small-angle X-ray scattering (SAXS), wide-angle powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM) imaging and rheological analyses. The microscopic imaging studies suggest the formation of a nanofibrillar three-dimensional (3D) network for the hydrogel. As observed visually and confirmed rheologically, the hydrogel at pH 7.46 exhibits thixotropy. This thixotropic property can be exploited to inject the peptide. Furthermore, the hydrogel exhibits remarkable antibacterial activity against Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa, which are responsible for many common diseases. The hydrogel has practical applicability due to its biocompatibility with human red blood cells and human fibroblast cells. Interestingly, this hydrogel shows high resistance toward proteolytic enzymes, making it a new potential antimicrobial agent for future applications. It has also been observed that a small change in molecular structure of the gelator peptide not only turns the gelator into a nongelator molecule under similar conditions, but it also has a significant negative impact on its bactericidal character.

Self-healing hydrogels triggered by amino acids

Nine amino acids with different chemical properties have been chosen to promote the formation of hydrogels based on the bolamphiphilic gelator A: three basic amino acids (arginine, histidine and lysine), one acidic amino acid (aspartic acid), two neutral aliphatic amino acids (alanine and serine) and three neutral aromatic amino acids (phenylalanine, tyrosine and tryptophan).

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Hydrogelation Induced by Fmoc-Protected Peptidomimetics

Four new low molecular weight hydrogelators (LMWGs) have been prepared in multigram scale and their attitude to form hydrogels has been tested. The gelation trigger is pH variation. The resulting gels have been characterized with several techniques: measurement of the melting points (T(gel)), transparency, gelation time, and viscoelastic properties, together with ECD analysis. Among them, Fmoc-L-Tyr-D-Oxd-OH 1 is an excellent gelator that leads to the preparation of strong, transparent, and viscoelastic gels, by pH variation. UV-visible analyses have demonstrated that the gels obtained with the LMWG 1 possess high transparency, with a transmittance up to 25.6% at a wavelength of 600 nm. Results of the amplitude sweep experiments showed that the elastic response component (G') was approximately an order of magnitude larger than the viscous component, indicating an elastic rather than viscous attitude of the gels, confirmed by the frequency independence of G' and G″ values, in the range from 0.1 to 100 rad·s(-1). The thermal behavior of gel obtained from Fmoc-L-Tyr-D-Oxd-OH 1 was characterized performing an "ad hoc" rheological temperature sweep experiment, that indicated that G' remained almost constant from 23 °C up to about 65 °C while G″ increased in the same temperature range. At higher temperatures, both G' and G″ values started to slightly decrease without displaying a crossover point.

Dehydrodipeptide Hydrogelators Containing Naproxen N-Capped Tryptophan: Self-Assembly, Hydrogel Characterization, and Evaluation as Potential Drug Nanocarriers

In this work, we introduce dipeptides containing tryptophan N-capped with the nonsteroidal anti-inflammatory drug naproxen and C-terminal dehydroamino acids, dehydrophenylalanine (ΔPhe), dehydroaminobutyric acid (ΔAbu), and dehydroalanine (ΔAla) as efficacious protease resistant hydrogelators. Optimized conditions for gel formation are reported. Transmission electron microscopy experiments revealed that the hydrogels consist of networks of micro/nanosized fibers formed by peptide self-assembly. Fluorescence and circular dichroism spectroscopy indicate that the self-assembly process is driven by stacking interactions of the aromatic groups. The naphthalene groups of the naproxen moieties are highly organized in the fibers through chiral stacking. Rheological experiments demonstrated that the most hydrophobic peptide (containing C-terminal ΔPhe) formed more elastic gels at lower critical gelation concentrations. This gel revealed irreversible breakup, while the C-terminal ΔAbu and ΔAla gels, although less elastic, exhibited structural recovery and partial healing of the elastic properties. A potential antitumor thieno[3,2-b]pyridine derivative was incorporated (noncovalently) into the gel formed by the hydrogelator containing C-terminal ΔPhe residue. Fluorescence and Förster resonance energy transfer measurements indicate that the drug is located in a hydrophobic environment, near/associated with the peptide fibers, establishing this type of hydrogel as a good drug-nanocarrier candidate.

Using the hydrolysis of anhydrides to control gel properties and homogeneity in pH-triggered gelation

The rate of pH change does not affect the primary assembly of a gelator, but does control the mechanical properties of the gel.

Macromolecular crowding and hydrophobic effects on Fmoc-diphenylalanine hydrogel formation in PEG : water mixtures

Addition of water triggers gelation in (poly)ethylene glycol (PEG) solutions of peptide gelators, with or without drugs added. The gels are formed by a combination of macromolecular crowding and hydrophobic effects as evident by significant secondary structure changes when compared to gel formed from pure water.

Hydrogels formed from Fmoc amino acids

A number of Fmoc amino acids can be effective low molecular weight hydrogelators; we compare single crystal structures to fibre X-ray diffraction data.