Antibacterial and biofilm-inhibitory effects of vancomycin-loaded mesoporous silica nanoparticles on methicillin-resistant staphylococcus aureus and gram-negative bacteria

The present study aimed to prepare and characterize vancomycin-loaded mesoporous silica nanoparticles (Van-MSNs) to detect inhibitory effects on the planktonic and biofilm forms of methicillin-resistant Staphylococcus aureus (MRSA) isolates, and study the biocompatibility and toxicity of Van-MSNs in vitro as well as antibacterial activity of Van-MSNs against Gram-negative bacteria. The inhibitory effects of Van-MSNs were investigated on MRSA using the determination of minimum inhibitory (MIC) and minimum biofilm-inhibitory concentrations (MBIC) as well as the effect on bacterial attachment. Biocompatibility was studied by examining the effect of Van-MSNs on the lysis and sedimentation rate of red blood cells (RBC). The interaction of Van-MSNs with human blood plasma was detected by the SDS-PAGE approach. The cytotoxic effect of the Van-MSNs on human bone marrow mesenchymal stem cells (hBM-MSCs) was evaluated by the MTT assay. The antibacterial effects of vancomycin and Van-MSNs on Gram-negative bacteria were also investigated using MIC determination using the broth microdilution method. Furthermore, bacteria outer membrane (OM) permeabilization was determined. Van-MSNs showed inhibitory effects on planktonic and biofilm forms of bacteria on all isolates at levels lower than MICs and MBICs of free vancomycin, but the antibiofilm effect of Van-MSNs was not significant. However, Van-MSNs did not affect bacterial attachment to surfaces. Van-loaded MSNs did not show a considerable effect on the lysis and sedimentation of RBC. A low interaction of Van-MSNs was detected with albumin (66.5 kDa). The hBM-MSCs viability in exposure to different levels of Van-MSNs was 91-100%. MICs of ≥ 128 µg/mL were observed for vancomycin against all Gram-negative bacteria. In contrast, Van-MSNs exhibited modest antibacterial activity inhibiting the tested Gram-negative bacterial strains, at concentrations of ≤ 16 µg/mL. Van-MSNs increased the OM permeability of bacteria that can increase the antimicrobial effect of vancomycin. According to our findings, Van-loaded MSNs have low cytotoxicity, desirable biocompatibility, and antibacterial effects and can be an option for the battle against planktonic MRSA.

Zwitterionic keratin coating on silk-Laponite fibrous membranes for guided bone regeneration

Implant-related infection is one of the main challenges in periodontal diseases. According to the zwitterionic properties of keratin, we aim to develop guided bone regeneration (GBR) membrane with antibacterial and bioactivity properties using a keratin coating. In this study, electrospun silk fibroin (SF)-Laponite (LAP) fibrous membranes were developed as GBR membranes, and keratin extracted from sheep wool was electrosprayed on them. Here, the role of electrospraying time (2, 3, and 4h) on the properties of the GBR membranes was investigated. After physicochemical characterization of the keratin-modified membranes, in vitro bioactivity and degradation rate of the membranes were studied in simulated body fluid and phosphate buffer saline, respectively. Moreover, proliferation and differentiation of mesenchymal stem cells were evaluated in contact with the keratin-modified SF-LAP membrane. Finally, the antibacterial activity of membranes against gram-positive bacteria (Staphylococcus aureus) was investigated. Results demonstrated the successful formation of homogeneous wool keratin coating on SF-LAP fibrous membranes using a simple electrospray process. While wool keratin coating significantly enhanced the elongation and hydrophilicity of the SF-LAP membrane, the mechanical strength was not changed. In addition, keratin coating significantly improved the bioactivity and degradation rate of SF-LAP membranes, owing to the carboxyl groups of amino acids in keratin coating. In addition, the synergic role of LAP nanoparticles and keratin coating drastically improved osteoblast proliferation and differentiation. Finally, the zwitterionic property of wool keratin coating originating from their equal positive (NH₃ ⁺ ) and negative (COO^- ) charges considerably improved the antibacterial activity of the SF-LAP membrane. Overall, keratin-coated SF-LAP fibrous membranes with significant mechanical and biological properties could have the potential for GBR membranes.

Cu-Doped Hollow Bioactive Glass Nanoparticles for Bone Infection Treatment

In search of new approaches to treat bone infection and prevent drug resistance development, a nanosystem based on hollow bioactive glass nanoparticles (HBGN) of composition 79.5SiO₂-(18-x)CaO-2.5P₂O₅-xCuO (x = 0, 2.5 or 5 mol-% CuO) was developed. The objective of the study was to evaluate the capacity of the HBGN to be used as a nanocarrier of the broad-spectrum antibiotic danofloxacin and source of bactericidal Cu²⁺ ions. Core-shell nanoparticles with specific surface areas close to 800 m²/g and pore volumes around 1 cm³/g were obtained by using hexadecyltrimethylammonium bromide (CTAB) and poly(styrene)-block-poly(acrylic acid) (PS-b-PAA) as structure-directing agents. Flow cytometry studies showed the cytocompatibility of the nanoparticles in MC3T3-E1 pre-osteoblastic cell cultures. Ion release studies confirmed the release of non-cytotoxic concentrations of Cu²⁺ ions within the therapeutic range. Moreover, it was shown that the inclusion of copper in the system resulted in a more gradual release of danofloxacin that was extended over one week. The bactericidal activity of the nanosystem was evaluated with E. coli and S. aureus strains. Nanoparticles with copper were not able to reduce bacterial viability by themselves and Cu-free HBGN failed to reduce bacterial growth, despite releasing higher antibiotic concentrations. However, HBGN enriched with copper and danofloxacin drastically reduced bacterial growth in sessile, planktonic and biofilm states, which was attributed to a synergistic effect between the action of Cu²⁺ ions and danofloxacin. Therefore, the nanosystem here investigated is a promising candidate as an alternative for the local treatment of bone infections.

Bioinspired Phosphorylcholine Coating for Surface Functionalization of Interventional Biomedical Implants with Bacterial Resistance and Anti-Encrustation Properties

Enhancing the lubrication property and bacterial resistance is extremely important for interventional biomedical implants to avoid soft tissue damage and biofilm formation. In this study, a zwitterionic phosphorylcholine coating (PMPC) was successfully developed to achieve surface functionalization of a polyurethane (PU)-based ureteral stent via subsurface "grafting from" photopolymerization. Typical surface characterizations such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and surface wettability and morphology analyses examined by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy demonstrated that the phosphorylcholine polymer was grafted on the substrate with a thickness of 180 nm. Additionally, the tribological experiment performed by a universal material tester showed that the lubrication performance of PU-PMPC was significantly improved compared with that of PU. The in vitro experiments indicated that the PMPC coating was biocompatible and stably modified on the surface of the substrate with an excellent bacterial resistance rate of >90%. Furthermore, the result of the in vivo experiment showed that the anti-encrustation performance of the surface-functionalized ureteral stent was better than that of the bare ureteral stent. The great enhancement in the lubrication, bacterial resistance, and anti-encrustation properties of the phosphorylcholine coating was thought to be due to the hydration effects of the zwitterionic charges. In summary, the bioinspired zwitterionic phosphorylcholine coating developed herein achieved significantly improved lubrication, bacterial resistance, and anti-encrustation performances and could be used as a convenient approach for surface functionalization of interventional biomedical implants.

Recent Progress in Nanostructured Smart Drug Delivery Systems for Cancer Therapy: A Review

Traditional treatment approaches for cancer involve intravenous chemotherapy or other forms of drug delivery. These therapeutic measures suffer from several limitations such as nonspecific targeting, poor biodistribution, and buildup of drug resistances. However, significant technological advancements have been made in terms of superior modes of drug delivery over the last few decades. Technical capability in analyzing the molecular mechanisms of tumor biology, nanotechnology─particularly the development of biocompatible nanoparticles, surface modification techniques, microelectronics, and material sciences─has increased. As a result, a significant number of nanostructured carriers that can deliver drugs to specific cancerous sites with high efficiency have been developed. This particular maneuver that enables the introduction of a therapeutic nanostructured substance in the body by controlling the rate, time, and place is defined as the nanostructured drug delivery system (NDDS). Because of their versatility and ability to incorporate features such as specific targeting, water solubility, stability, biocompatibility, degradability, and ability to reverse drug resistance, they have attracted the interest of the scientific community, in general, and nanotechnologists as well as biomedical scientists. To keep pace with the rapid advancement of nanotechnology, specific technical aspects of the recent NDDSs and their prospects need to be reported coherently. To address these ongoing issues, this review article provides an overview of different NDDSs such as lipids, polymers, and inorganic nanoparticles. In addition, this review also reports the challenges of current NDDSs and points out the prospective research directions of these nanocarriers. From our focused review, we conclude that still now the most advanced and potent field of application for NDDSs is lipid-based, while other significantly potential fields include polymer-based and inorganic NDDSs. However, despite the promises, challenges remain in practical implementations of such NDDSs in terms of dosage and stability, and caution should be exercised regarding biocompatibility of materials. Considering these aspects objectively, this review on NDDSs will be particularly of interest for small-to-large scale industrial researchers and academicians with expertise in drug delivery, cancer research, and nanotechnology.

Resveratrol Encapsulation and Release from Pristine and Functionalized Mesoporous Silica Carriers

Resveratrol, a naturally occurring polyphenol, has attracted significant attention due to its antioxidant, cardioprotective and anticancer potential. However, its low aqueous solubility limits resveratrol bioavailability and use. In this work, different mesoporous silica matrices were used to encapsulate the polyphenol and to increase its dissolution rate. Pristine MCM-41, MCM-48, SBA-15, SBA-16, FDU-12 and MCF silica were obtained. The influence of SBA-15 functionalized with aminopropyl, isocyanate, phenyl, mercaptopropyl, and propionic acid moieties on resveratrol loading and release profiles was also assessed. The cytotoxic effects were evaluated for mesoporous carriers and resveratrol-loaded samples against human lung cancer (A549), breast cancer (MDA-MB-231) and human skin fibroblast (HSF) cell lines. The effect on apoptosis and cell cycle were assayed for selected resveratrol-loaded carriers. The polyphenol molecules are encapsulated only inside the mesopores, mostly in amorphous state. All materials containing either pristine or functionalized silica carriers increased polyphenol dissolution rate. The influence of the physico-chemical properties of the mesoporous carriers and resveratrol–loaded supports on the kinetic parameters was identified. Resv@SBA-15-SH and Resv@SBA-15-NCO samples exhibited the highest anticancer effect against A549 cells (IC50 values were 26.06 and 36.5 µg/mL, respectively) and against MDA-MB-231 (IC50 values were 35.56 and 19.30 µg/mL, respectively), which highlights their potential use against cancer.

Chronology of Global Success: 20 Years of Prof Vallet-Regí Solving Questions

Twenty years ago, a group of bold scientists led by Prof Vallet-Regí suggested for the first time the use of mesoporous materials as potential drug delivery systems. Without knowing it; these pioneers unleashed the beast of creativity around the world because that original idea has been the inspiration of hundreds of scientific groups for the design of many versatile delivery systems based on mesoporous materials. Because the dream is not the destination, it is the journey, the present review aims to summarise the chain of events that catapulted a small and young research team from the grassroots of academia to the elite of the Biomedical Engineering field.

Strontium-Modified Scaffolds Based on Mesoporous Bioactive Glasses/Polyvinyl Alcohol Composites for Bone Regeneration

In the search of a new biomaterial for the treatment of bone defects resulting from traumatic events, an osteoporosis scenario with bone fractures, tumor removal, congenital pathologies or implant revisions for infection, we developed 3D scaffolds based on mesoporous bioactive glasses (MBGs) (85 − x)SiO₂–5P₂O₅–10CaO–xSrO (x = 0, 2.5 and 5 mol.%). The scaffolds with meso-macroporosity were fabricated by pouring a suspension of MBG powders in polyvinyl alcohol (PVA) into a negative template of polylactic acid (PLA), followed by removal of the template by extraction at low temperature. SrO-containing MBGs exhibited excellent properties for bone substitution including ordered mesoporous structure, high textural properties, quick in vitro bioactive response in simulated body fluid (SBF) and the ability of releasing concentrations of strontium ions able to stimulate expression of early markers of osteoblastic differentiation. Moreover, the direct contact of MC3T3-E1 pre-osteoblastic cells with the scaffolds confirmed the cytocompatibility of the three compositions investigated. Nevertheless, the scaffold containing 2.5% of SrO induced the best cellular proliferation showing the potential of this scaffold as a candidate to be further investigated in vitro and in vivo, aiming to be clinically used for bone regeneration applications in non-load bearing sites.

Biomaterials against Bone Infection

Chronic bone infection is considered as one of the most problematic biofilm-related infections. Its recurrent and resistant nature, high morbidity, prolonged hospitalization, and costly medical care expenses have driven the efforts of the scientific community to develop new therapies to improve the standards used today. There is great debate on the management of this kind of infection in order to establish consistent and agreed guidelines in national health systems. The scientific research is oriented toward the design of anti-infective biomaterials both for prevention and cure. The properties of these materials must be adapted to achieve better anti-infective performance and good compatibility, which allow a good integration of the implant with the surrounding tissue. The objective of this review is to study in-depth the antibacterial biomaterials and the strategies underlying them. In this sense, this manuscript focuses on antimicrobial coatings, including the new technological advances on surface modification; scaffolding design including multifunctional scaffolds with both antimicrobial and bone regeneration properties; and nanocarriers based on mesoporous silica nanoparticles with advanced properties (targeting and stimuli-response capabilities).

Mesoporous Silica Nanoparticles for the Treatment of Complex Bone Diseases: Bone Cancer, Bone Infection and Osteoporosis

Bone diseases, such as bone cancer, bone infection and osteoporosis, constitute a major issue for modern societies as a consequence of their progressive ageing. Even though these pathologies can be currently treated in the clinic, some of those treatments present drawbacks that may lead to severe complications. For instance, chemotherapy lacks great tumor tissue selectivity, affecting healthy and diseased tissues. In addition, the inappropriate use of antimicrobials is leading to the appearance of drug-resistant bacteria and persistent biofilms, rendering current antibiotics useless. Furthermore, current antiosteoporotic treatments present many side effects as a consequence of their poor bioavailability and the need to use higher doses. In view of the existing evidence, the encapsulation and selective delivery to the diseased tissues of the different therapeutic compounds seem highly convenient. In this sense, silica-based mesoporous nanoparticles offer great loading capacity within their pores, the possibility of modifying the surface to target the particles to the malignant areas and great biocompatibility. This manuscript is intended to be a comprehensive review of the available literature on complex bone diseases treated with silica-based mesoporous nanoparticles-the further development of which and eventual translation into the clinic could bring significant benefits for our future society.

Bioinspired Surface Functionalization of Titanium Alloy for Enhanced Lubrication and Bacterial Resistance

In clinics it is extremely important for implanted devices to achieve the property of enhanced lubrication and bacterial resistance; however, such a strategy has rarely been reported in previous literature. In the present study, a surface functionalization method, motivated by articular cartilage-inspired superlubrication and mussel-inspired adhesion, was proposed to modify titanium alloy (Ti6Al4V) using the copolymer (DMA-MPC) synthesized via free radical copolymerization. The copolymer-coated Ti6Al4V (Ti6Al4V@DMA-MPC) was evaluated by X-ray photoelectron spectroscopy, water contact angle, and Raman spectra to confirm that the DMA-MPC copolymer was successfully coated onto the Ti6Al4V substrate. In addition, the tribological test, with the polystyrene microsphere and Ti6Al4V or Ti6Al4V@DMA-MPC as the tribopair, indicated that the friction coefficient was greatly reduced for Ti6Al4V@DMA-MPC. Furthermore, the bacterial resistance test showed that bacterial attachment was significantly inhibited for Ti6Al4V@DMA-MPC for the three types of bacteria tested. The enhanced lubrication and bacterial resistance of Ti6Al4V@DMA-MPC was due to the tenacious hydration shell formed surrounding the zwitterionic charges in the phosphorylcholine group of the DMA-MPC copolymer. In summary, a bioinspired surface functionalization strategy is developed in this study, which can act as a universal and promising method to achieve enhanced lubrication and bacterial resistance for biomedical implants.

Nanomaterials as Promising Alternative in the Infection Treatment

Both the prevalence of antibiotic resistance and the increased biofilm-associated infections are boosting the demand for new advanced and more effective treatment for such infections. In this sense, nanotechnology offers a ground-breaking platform for addressing this challenge. This review shows the current progress in the field of antimicrobial inorganic-based nanomaterials and their activity against bacteria and bacterial biofilm. Herein, nanomaterials preventing the bacteria adhesion and nanomaterials treating the infection once formed are presented through a classification based on their functionality. To fight infection, nanoparticles with inherent antibacterial activity and nanoparticles acting as nanovehicles are described, emphasizing the design of the carrier nanosystems with properties targeting the bacteria and the biofilm.

Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.

Mixed-charge pseudo-zwitterionic mesoporous silica nanoparticles with low-fouling and reduced cell uptake properties

The design of drug delivery systems needs to consider biocompatibility and host body recognition for an adequate actuation. In this work, mesoporous silica nanoparticles (MSNs) surfaces were successfully modified with two silane molecules to provide mixed-charge brushes (-NH3⊕/-PO3⊝) and well evaluated in terms of surface properties, low-fouling capability and cell uptake in comparison to PEGylated MSNs. The modification process consists in the simultaneous direct-grafting of hydrolysable short chain amino (aminopropyl silanetriol, APST) and phosphonate-based (trihydroxy-silyl-propyl-methyl-phosphonate, THSPMP) silane molecules able to provide a pseudo-zwitterionic nature under physiological pH conditions. Results confirmed that both mixed-charge pseudo-zwitterionic MSNs (ZMSN) and PEG-MSN display a significant reduction of serum protein adhesion and macrophages uptake with respect to pristine MSNs. In the case of ZMSNs, this reduction is up to a 70-90% for protein adsorption and c.a. 60% for cellular uptake. This pseudo-zwitterionic modification has been focused on the aim of local treatment of bacterial infections through the synergistic effect between the inherent antimicrobial effect of mixed-charge system and the levofloxacin antibiotic release profile. These findings open promising future expectations for the effective treatment of bacterial infections through the use of mixed-charge pseudo-zwitterionic MSNs furtive to macrophages and with antimicrobial properties. STATEMENT OF SIGNIFICANCE: Herein a novel antimicrobial mixed-charge pseudo-zwitterionic MSNs based system with low-fouling and reduced cell uptake behavior has been developed. This chemical modification has been performed by the simultaneous grafting of short chain organosilanes, containing amino and phosphonate groups, respectively. This nanocarrier has been tested for local infection treatment through the synergy between the antimicrobial effect of mixed-charge brushes and the levofloxacin antibiotic release profile.

Mesoporous Silica Materials as Drug Delivery: "The Nightmare" of Bacterial Infection

Mesoporous silica materials (MSM) have a great surface area and a high pore volume, meaning that they consequently have a large loading capacity, and have been demonstrated to be unique candidates for the treatment of different pathologies, including bacterial infection. In this text, we review the multiple ways of action in which MSM can be used to fight bacterial infection, including early detection, drug release, targeting bacteria or biofilm, antifouling surfaces, and adjuvant capacity. This review focus mainly on those that act as a drug delivery system, and therefore that have an essential characteristic, which is their great loading capacity. Since MSM have advantages in all stages of combatting bacterial infection; its prevention, detection and finally in its treatment, we can venture to talk about them as the "nightmare of bacteria".

The Role of Zwitterionic Materials in the Fight against Proteins and Bacteria

Zwitterionization of biomaterials has been heightened to a potent tool to develop biocompatible materials that are able to inhibit bacterial and non-specific proteins adhesion. This constitutes a major progress in the biomedical field. This manuscript overviews the main functionalization strategies that have been reported up to date to design and develop these advanced biomaterials. On this regard, the recent research efforts that were dedicated to provide their surface of zwitterionic nature are summarized by classifying biomaterials in two main groups. First, we centre on biomaterials in clinical use, concretely bioceramics, and metallic implants. Finally, we revise emerging nanostructured biomaterials, which are receiving growing attention due to their multifunctionality and versatility mainly in the local drug delivery and bone tissue regeneration scenarios.

Drug Delivery and Bone Infection

Bone infection represents greatest challenge in public health care with serious social and economic implications. The efforts of the scientific community are focused in the development of innovative and advanced biomaterials with anti-infective properties related to their non-fouling, bactericidal and/or antibiofilm capabilities. This chapter aims at thoroughly surveying the different approaches based on silica mesoporous materials (SMMs) for bone infection management. Bacteria repelling surfaces by zwitterionization process, bactericidal effect by implantable devices with antimicrobial local delivery agents and antibiofilm effect by more sophisticated systems based on targeted nanocarriers will be considered.

CO Preferential Photo-Oxidation in Excess of Hydrogen in Dark and Simulated Solar Light Irradiation over AuCu-Based Catalysts on SBA-15 Mesoporous Silica-Titania

In this work, SBA-15 silica and silica-titania have been used as supports for photocatalysts based on AuCu alloy (Au:Cu = 1) to be used in the preferential oxidation of CO (CO-PROX) in excess of hydrogen at room temperature and atmospheric pressure both in the dark and under simulated solar light irradiation. To study their textural, structural, chemical and optical properties, the samples were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), adsorption-desorption of N₂ at -196 °C, 13C and 29Si solid state nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance ultraviolet-visible (DRUV-vis) spectroscopy. Titanium was present mainly in the form of titania aggregates, but also as small particles interacting with the SBA support. In both catalysts, the metal alloy nanoparticles displayed an average size of 4 nm as demonstrated by TEM measurements. AuCu/Ti-SBA turned out to be photoactive and selective in the photo-CO-PROX reaction showing the highest activity, with conversion and selectivity towards CO₂ of 80%, due both to the presence of titania incorporated in SBA-15 and to the synergistic effect of Cu when alloyed with Au.

Controlling drug release from mesoporous silica through an amorphous, nanoconfined 1-tetradecanol layer

Mesoporous silica materials are promising nano-carriers for drug delivery systems. Even though there are many strategies for controlling the drug release kinetics, these must be adapted through trial and error on a case-by-case basis. Here we explore the possibility of tailoring the release kinetics of hydrophilic, water soluble therapeutic agents from mesoporous silica through addition of a hydrophobic excipient, 1-tetradecanol. In vitro drug release experiments performed at 37 °C, in phosphate buffer solution (pH 7.4) show that the addition of tetradecanol yields slower drug release kinetics, which was correlated with the presence of a liquid fatty alcohol interfacial layer. The layer mass is 11-23 wt.% of the metoprolol-loaded silica sample, and it causes up to 1.6 times decrease of initial release rate with respect to materials without the fatty alcohol. This effect does not depend of carrier pore arrangement, being noticed for both hexagonal MCM-41 and cubic KIT-5 mesoporous silica. The toxicity of tetradecanol-containing materials was evaluated by formazan-based viability assay on Opossum kidney epithelial cell line, and no significant toxicity was observed.

Multifunctional pH sensitive 3D scaffolds for treatment and prevention of bone infection

Multifunctional-therapeutic three-dimensional (3D) scaffolds have been prepared. These biomaterials are able to destroy the S. aureus bacterial biofilm and to allow bone regeneration at the same time. The present study is focused on the design of pH sensitive 3D hierarchical meso-macroporous 3D scaffolds based on MGHA nanocomposite formed by a mesostructured glassy network with embedded hydroxyapatite nanoparticles, whose mesopores have been loaded with levofloxacin (Levo) as antibacterial agent. These 3D platforms exhibit controlled and pH-dependent Levo release, sustained over time at physiological pH (7.4) and notably increased at infection pH (6.7 and 5.5), which is due to the different interaction rate between diverse Levo species and the silica matrix. These 3D systems are able to inhibit the S. aureus growth and to destroy the bacterial biofilm without cytotoxic effects on human osteoblasts and allowing an adequate colonization and differentiation of preosteoblastic cells on their surface. These findings suggest promising applications of these hierarchical MGHA nanocomposite 3D scaffolds for the treatment and prevention of bone infection.

STATEMENT OF SIGNIFICANCE

Multifunctional 3D nanocomposite scaffolds with the ability for loading and sustained delivery of an antimicrobial agent, to eliminate and prevent bone infection and at the same time to contribute to bone regeneration process without cytotoxic effects on the surrounding tissue has been proposed. These 3D scaffolds exhibit a sustained levofloxacin delivery at physiological pH (pH 7.4), which increasing notably when pH decreases to characteristic values of bone infection process (pH 6.7 and pH 5.5). In vitro competitive assays between preosteoblastic and bacteria onto the 3D scaffold surface demonstrated an adequate osteoblast colonization in entire scaffold surface together with the ability to eliminate bacteria contamination.

Lysine-Grafted MCM-41 Silica as an Antibacterial Biomaterial

This paper proposes a facile strategy for the zwitterionization of bioceramics that is based on the direct incorporation of l-lysine amino acid via the ε-amino group onto mesoporous MCM-41 materials. Fourier transform infrared (FTIR) studies of lysine-grafted MCM-41 (MCM-LYS) simultaneously showed bands at 3080 and 1540 cm-1 and bands at 1625 and 1415 cm-1 corresponding to -NH3+/COO- pairs, which demonstrate the incorporation of the amino acid on the material surface keeping its zwitterionic character. Both elemental and thermogravimetric analyses showed that the amount of grafted lysine was 8 wt. % based on the bioceramic total weight. Moreover, MCM-LYS exhibited a reduction of adhesion of S. aureus and E. coli bacteria in 33% and 50%, respectively at physiological pH, as compared with pristine MCM-41. Biofilm studies onto surfaces showed that lysine functionalization elicited a reduction of the area covered by S. aureus biofilm from 42% to only 5% (88%). This research shows a simple and effective approach to chemically modify bioceramics using single amino acids that provides zwitterionic functionality, which is useful to develop new biomaterials that are able to resist bacterial adhesion.

Prevention of bacterial adhesion to zwitterionic biocompatible mesoporous glasses

Novel materials, based on Mesoporous Bioactive Glasses (MBGs) in the ternary system SiO₂-CaO-P₂O₅, decorated with (3-aminopropyl)triethoxysilane (APTES) and subsequently with amino acid Lysine (Lys), by post-grafting method on the external surface of the glasses (named MBG-NH₂ and MBG-Lys), are reported. The surface functionalization with organic groups did not damage the mesoporous network and their structural and textural properties were also preserved despite the high solubility of MBG matrices. The incorporation of Lys confers a zwitterionic nature to these MBG materials due to the presence of adjacent amine and carboxylic groups in the external surface. At physiologic pH, this coexistence of basic amine and carboxilic acid groups from anchored Lys provided zero surface charge named zwitterionic effect. This behaviour could give rise to potential applications of antibacterial adhesion. Therefore, in order to assess the influence of zwitterionic nature in in vitro bacterial adhesion, studies were carried out with Staphylococcus aureus. It was demonstrated that the efficient interaction of these zwitterionic pairs onto the MBG surfaces reduced bacterial adhesion up to 99.9% compared to bare MBGs. In order to test the suitability of zwitterionic MBGs materials as bone grafts, their cytocompatibility was investigated in vitro with MC3T3-E1 preosteoblasts. These findings suggested that the proposed surface functionalization strategy provided MBG materials with notable antibacterial adhesion properties, hence making these materials promising candidates for local bone infection therapy.

STATEMENT OF SIGNIFICANCE

The present research work is focused in finding a preventive treatment of bone infection based on Mesoporous Bioactive Glasses (MBGs) with antibacterial adhesion properties obtained by zwitterionic surface modification. MBGs exhibit unique nanostructural, textural and bioactive characteristics. The novelty and originality of this manuscript is based on the design and optimization of a straightforward functionalization method capable of providing MBGs with zwitterionic surfaces that are able to inhibit bacterial adhesion without affecting their cytocompatibility. This new characteristic enhanced the MBG properties to avoid the bacterial adherence onto the implant surfaces for bone tissue engineering applications. Subsequently, it could help to decrease the infection rates after implantation surgery, which represents one of the most serious complications associated to surgical treatments of bone diseases and fractures.

3D scaffold with effective multidrug sequential release against bacteria biofilm

Bone infection is a feared complication following surgery or trauma that remains as an extremely difficult disease to deal with. So far, the outcome of therapy could be improved with the design of 3D implants, which combine the merits of osseous regeneration and local multidrug therapy so as to avoid bacterial growth, drug resistance and the feared side effects. Herein, hierarchical 3D multidrug scaffolds based on nanocomposite bioceramic and polyvinyl alcohol (PVA) prepared by rapid prototyping with an external coating of gelatin-glutaraldehyde (Gel-Glu) have been fabricated. These 3D scaffolds contain three antimicrobial agents (rifampin, levofloxacin and vancomycin), which have been localized in different compartments of the scaffold to obtain different release kinetics and more effective combined therapy. Levofloxacin was loaded into the mesopores of nanocomposite bioceramic part, vancomycin was localized into PVA biopolymer part and rifampin was loaded in the external coating of Gel-Glu. The obtained results show an early and fast release of rifampin followed by sustained and prolonged release of vancomycin and levofloxacin, respectively, which are mainly governed by the progressive in vitro degradability rate of these scaffolds. This combined therapy is able to destroy Gram-positive and Gram-negative bacteria biofilms as well as inhibit the bacteria growth. In addition, these multifunctional scaffolds exhibit excellent bioactivity as well as good biocompatibility with complete cell colonization of preosteoblast in the entire surface, ensuring good bone regeneration. These findings suggest that these hierarchical 3D multidrug scaffolds are promising candidates as platforms for local bone infection therapy.

STATEMENT OF SIGNIFICANCE

The present study is focused in finding an adequate therapeutic solution for the treatment of bone infection based on 3D multifunctional scaffolds, which combines the merits of osseous regeneration and local multidrug delivery. These 3D multidrug scaffolds, containing rifampin, levofloxacin and vancomycin, localized in different compartments to achieve different release kinetics. These 3D multidrug scaffolds displays an early and fast release of rifampin followed by sustained and prolonged release of vancomycin and levofloxacin, which are able to destroy Staphylococcus and Escherichia biofilms as well as inhibit bacteria growth in very short time periods. This new combined therapy approach involving the sequential delivery of antibiofilms with antibiotics constitutes an excellent and promising alternative for bone infection treatment.

Antibacterial effect of antibiotic-loaded SBA-15 on biofilm formation by Staphylococcus aureus and Staphylococcus epidermidis

Staphylococcus aureus and Staphylococcus epidermidis are human pathogens involved in implant-related infections. During those diseases, they are able to form biofilms showing resistance to the effect of many different antibiotics. Drug delivery systems allow a local and effective delivery of antibiotics at high concentrations in the infected tissue without causing the cytotoxic effects commonly linked to systemic administration. We report the use of a porous ceramic biomaterial, such as SBA-15 loaded with antibiotics, to deliver them directly to the infected tissue. SBA-15 discs were loaded with Vancomycin, Rifampin and a combination of both, introduced in a suspension of S. aureus 15981 and S. epidermidis ATCC 35984 and incubated during 6 and 24 h. A statistically significant decrease in the biofilm density and the number of viable bacteria was detected for all antibiotics at 6 h in both bacteria. Rifampin showed an increase in the biofilm density and the number of viable bacteria at 24 h. No differences were detected between Vancomycin and the combination of antibiotics. S. epidermidis was more sensitive to the effect of the antibiotics than S. aureus. Here we have demonstrated that SBA-15 is able to act as an effective drug delivery system not only from a pharmaceutical point of view, but also from a biological one.

Zwitterionic ceramics for biomedical applications

Bioceramics for bone tissue regeneration, local drug delivery and nanomedicine, are receiving growing attention by the biomaterials scientific community. The design of bioceramics with improved surface properties able to overcome clinical issues is a great scientific challenge. Zwitterionization of surfaces has arisen as a powerful alternative in the design of biocompatible bioceramics capable to inhibit bacterial and non-specific protein adsorption, which opens up new insights into the biomedical applications of these materials. This manuscript reviews the different approaches reported up to date for the synthesis and characterization of zwitterionic bioceramics with potential clinical applications.

STATEMENT OF SIGNIFICANCE

Zwitterionic bioceramics are receiving growing attention by the biomaterials scientific community due to their great potential in bone tissue regeneration, local drug delivery and nanomedicines. Herein, the different strategies developed so far to synthesize and characterize zwitterionic bioceramics with potential clinical applications are summarized.

The Influence of Modified Silica Nanomaterials on Adult Stem Cell Culture

The preparation of tailored nanomaterials able to support cell growth and viability is mandatory for tissue engineering applications. In the present work, silica nanoparticles were prepared by a sol-gel procedure and were then functionalized by condensation of amino groups and by adsorption of silver nanoparticles. Transmission electron microscopy (TEM) imaging was used to establish the morphology and the average dimensions of about 130 nm, which were not affected by the functionalization. The three silica samples were deposited (1 mg/mL) on cover glasses, which were used as a substrate to culture adult human bone marrow-mesenchymal stem cells (hBM-MSCs) and human adipose-derived stem cells (hASCs). The good cell viability over the different silica surfaces was evaluated by monitoring the mitochondrial dehydrogenase activity. The analysis of the morphological parameters (aspect ratio, cell length, and nuclear shape Index) yielded information about the interactions of stem cells with the surface of three different nanoparticles. The data are discussed in terms of chemical properties of the surface of silica nanoparticles.

Engineered Nanomaterials for Infection Control and Healing Acute and Chronic Wounds

Nanoengineered biomaterials have dramatically expanded the range of tools used for infection control and to accelerate wound healing. This review thoroughly describes the developments that are shaping this emerging field and evaluates the potential wound healing applications of recently developed engineered nanomaterials for both acute and chronic wounds. Specifically, we will assess the unique characteristics of engineered nanomaterials that render them applicable for wound healing and infection control. A range of engineered nanomaterials, including polymeric-, metallic- and ceramic-based nanomaterials, that could be used as therapeutic delivery agents to accelerate regeneration of damaged dermal and epidermal tissues are also detailed. Finally, we will detail the current state of engineered nanomaterials for wound regeneration and will identify promising new research directions in infection control.

Surface zwitterionization of customized 3D Ti6Al4V scaffolds: a promising alternative to eradicate bone infection

Surface zwitterionization provides new perspectives for custom-made Ti6Al4V EBM implants for bone tissue regeneration with antimicrobial properties.

Silicon oxide based materials for controlled release in orthopedic procedures

By virtue of excellent tissue responses in bone tissue, silicon oxide (silica) based materials have been used for bone tissue engineering. Creating nanoscale porosity within silica based materials expands their applications into the realm of controlled release area. This additional benefit of silica based materials widens their application in the orthopedic fields in a major way. This review discusses the various chemical and physical forms of silica based controlled release materials, the release mechanisms, the applications in orthopedic procedures and their overall biocompatibility.

Fabrication of novel Si-doped hydroxyapatite/gelatine scaffolds by rapid prototyping for drug delivery and bone regeneration

Porous 3-D scaffolds consisting of gelatine and Si-doped hydroxyapatite were fabricated at room temperature by rapid prototyping. Microscopic characterization revealed a highly homogeneous structure, showing the pre-designed porosity (macroporosity) and a lesser in-rod porosity (microporosity). The mechanical properties of such scaffolds are close to those of trabecular bone of the same density. The biological behavior of these hybrid scaffolds is greater than that of pure ceramic scaffolds without gelatine, increasing pre-osteoblastic MC3T3-E1 cell differentiation (matrix mineralization and gene expression). Since the fabrication process of these structures was carried out at mild conditions, an antibiotic (vancomycin) was incorporated in the slurry before the extrusion of the structures. The release profile of this antibiotic was measured in phosphate-buffered saline solution by high-performance liquid chromatography and was adjusted to a first-order release kinetics. Vancomycin released from the material was also shown to inhibit bacterial growth in vitro. The implications of these results for bone tissue engineering applications are discussed.