Antibacterial property, angiogenic and osteogenic activity of Cu-incorporated TiO2 coating

Preparation and Characterization of Nanofiber Coatings on Bone Implants for Localized Antimicrobial Activity Based on Sustained Ion Release and Shape-Preserving Design

Titanium (Ti), as a hard tissue implant, is facing a big challenge for rapid and stable osseointegration owing to its intrinsic bio-inertness. Meanwile, surface-related infection is also a serious threat. In this study, large-scale quasi-vertically aligned sodium titanate nanowire (SNW) arrayed coatings incorporated with bioactive Cu2+ ions were fabricated through a compound process involving acid etching, hydrothermal treatment (HT), and ion exchange (IE). A novel coating based on sustained ion release and a shape-preserving design is successfully obtained. Cu2+ substituted Na+ in sodium titanate lattice to generate Cu-doped SNW (CNW), which maintains the micro-structure and phase components of the original SNW, and can be efficiently released from the structure by immersing them in physiological saline (PS) solutions, ensuring superior long-term structural stability. The synergistic effects of the acid etching, bidirectional cogrowth, and solution-strengthening mechanisms endow the coating with higher bonding strengths. In vitro antibacterial tests demonstrated that the CNW coatings exhibited effective good antibacterial properties against both Gram-positive and Gram-negative bacteria based on the continuous slow release of copper ions. This is an exciting attempt to achieve topographic, hydrophilic, and antibacterial activation of metal implants, demonstrating a paradigm for the activation of coatings without dissolution and providing new insights into insoluble ceramic-coated implants with high bonding strengths.

Cu-vitamin B3 donut-like MOFs incorporated into TEMPO-oxidized bacterial cellulose nanofibers for wound healing

In this study, a novel multifunctional nanocomposite wound dressing was developed, consisting of TEMPO-oxidized bacterial cellulose (TOBC) nanofibers functionalized with donut-like copper-based metal-organic frameworks (CuVB3 MOFs). These CuVB3 MOFs were constructed using copper nodes linked by vitamin B3 molecules, resulting in a copper nicotinate crystal structure as confirmed by X-ray diffraction. Electron microscopy confirmed the presence of donut-like microstructures with uniform element distribution in the synthesized MOFs. Through the incorporation of CuVB3 MOFs into the TOBC nanofibers, innovative TOBC-CuVB3 nanocomposites were created. Biocompatibility testing using the MTT assay demonstrated enhanced cell viability of over 115% for the TOBC-CuVB3 nanocomposite. Acridine Orange staining revealed a ratio of 88-92% live cells on the wound dressings. Furthermore, fibroblast cells cultured on TOBC-CuVB3 exhibited expanded morphologies with long filopodia. The agar diffusion method exhibited improved antibacterial activity against both Gram-positive and Gram-negative bacterial strains, correlating with increased CuVB3 concentration in the samples. In vitro cellular scratch assays demonstrated excellent wound healing potential, with a closure rate of over 98% for wounds treated with the TOBC-CuVB3 nanocomposite. These findings underscore the synergistic effects of copper, vitamin B3, and TOBC nanofibers in the wound healing process.

Titanium surfaces with biomimetic topography and copper incorporation to modulate behaviors of stem cells and oral bacteria

Purpose: Insufficient osseointegration and implant-associated infection are major factors in the failure of Ti-based implants, thus spurring scientists to develop multifunctional coatings that are better suited for clinical requirements. Here, a new biomimetic micro/nanoscale topography coating combined with antibacterial copper was simultaneously designed for Ti-based implant surfaces by adopting a hybrid approach combining plasma electrolytic oxidation and hydrothermal treatment. Results: The biological interactions between this biofunctionalized material interface and stem cells promoted cellular adhesion and spreading during initial attachment and supported cellular proliferation for favorable biocompatibility. Bone marrow mesenchymal stem cells (BMMSCs) on the coating displayed enhanced cellular mineral deposition ability, higher alkaline phosphatase activity, and upregulated expression of osteogenic-related markers without the addition of osteoinductive chemical factors, which improved osseointegration. More interestingly, this new coating reduced the viability of oral pathogens (Fusobacterium nucleatum and Porphyromonas gingivalis)-the primary causes of implant-associated infections as indicated by damage of cellular structures and decreased population. This is the first study investigating the antibacterial property of dental implants modified by a hybrid approach against oral pathogens to better mimic the oral environment. Conclusion: These findings suggest that biofunctionalization of the implant coating by surface modification methods and the incorporation of antibacterial copper (Cu) offer superior osteogenesis capability and effective antibacterial activity, respectively. These strategies have great value in orthopedic and dental implant applications.

Surface Modification of Titanium Implants by Metal Ions and Nanoparticles for Biomedical Application

Implant surface modification can improve osseointegration and reduce peri-implant inflammation. Implant surfaces are modified with metals because of their excellent mechanical properties and significant functions. Metal surface modification is divided into metal ions and nanoparticle surface modification. These two methods function by adding a finishing metal to the surface of the implant, and both play a role in promoting osteogenic, angiogenic, and antibacterial properties. Based on this, the nanostructural surface changes confer stronger antibacterial and cellular affinity to the implant surface. The current paper reviews the forms, mechanisms, and applications of nanoparticles and metal ion modifications to provide a foundation for the surface modification of implants.

Graphene Oxide/RhPTH(1-34)/Polylactide Composite Nanofibrous Scaffold for Bone Tissue Engineering

Polylactide (PLA) is one of the most promising polymers that has been widely used for the repair of damaged tissues due to its biocompatibility and biodegradability. PLA composites with multiple properties, such as mechanical properties and osteogenesis, have been widely investigated. Herein, PLA/graphene oxide (GO)/parathyroid hormone (rhPTH(1-34)) nanofiber membranes were prepared using a solution electrospinning method. The tensile strength of the PLA/GO/rhPTH(1-34) membranes was 2.64 MPa, nearly 110% higher than that of a pure PLA sample (1.26 MPa). The biocompatibility and osteogenic differentiation test demonstrated that the addition of GO did not markedly affect the biocompatibility of PLA, and the alkaline phosphatase activity of PLA/GO/rhPTH(1-34) membranes was about 2.3-times that of PLA. These results imply that the PLA/GO/rhPTH(1-34) composite membrane may be a candidate material for bone tissue engineering.

Facile and versatile strategy for fabrication of highly bacteriostatic and biocompatible SLA-Ti surfaces with the regulation of Mg/Cu coimplantation ratio for dental implant applications

The low bactericidal activity and poor osteogenic activity of Ti limit the use of this metal in dental implants by increasing the risk of their periimplantitis-induced failure. To address this problem, we herein surface-modify biomedical Ti through the plasma immersion coimplantation of Mg and Cu ions and examine the physicochemical properties and bio-/hemocompatibility of the resulting materials as well as their activity against periimplantitis-causing bacteria, namely Streptococcus mutans and Porphyromonas gingivalis. The reactive oxygen species release (ROS) was assessed via the 2'7'-dichlorodihydrofluorescein diacetate (DCFH-DA) assay. The best-performing sample Mg/Cu（8/10）-Ti promotes cell proliferation and initial cell adhesion while exhibiting high hydrophilicity, outstanding activity against the aforementioned pathogens, and good bio-/hemocompatibility. Additionally, higher levels of cellular ROS generation in S. mutans and P. gingivalis could provide insight into the antibacterial mechanisms involved in Mg/Cu（8/10）-Ti. Thus, Mg/Cu coimplantation is concluded to endow the Ti surface with high bacteriostatic activity and biocompatibility, paving the way to the widespread use of Ti-based dental implants.

The race for the optimal antimicrobial surface: perspectives and challenges related to plasma electrolytic oxidation coating for titanium-based implants

Plasma electrolytic oxidation (PEO) is a low-cost, structurally reliable, and environmentally friendly surface modification method for orthopedic and dental implants. This technique is successful for the formation of porous, corrosion-resistant, and bioactive coatings, besides introducing antimicrobial compounds easily. Given the increase in implant-related infections, antimicrobial PEO-treated surfaces have been widely proposed to surmount this public health concern. This review comprehensively discusses antimicrobial implant surfaces currently produced by PEO in terms of their in vitro and in vivo microbiological and biological properties. We present a critical [part I] and evidence-based [part II] review about the plethora of antimicrobial PEO-treated surfaces. The mechanism of microbial accumulation on implanted devices and the principles of PEO technology to ensure antimicrobial functionalization by one- or multi-step processes are outlined. Our systematic literature search showed that particular focus has been placed on the metallic and semi-metallic elements incorporated into PEO surfaces to facilitate antimicrobial properties, which are often dose-dependent, without leading to cytotoxicity in vitro. Meanwhile, there are concerns over the biocompatibility of PEO and its long-term antimicrobial effects in animal models. We clearly highlight the importance of using clinically relevant infection models and in vivo long-term assessments to guarantee the rational design of antimicrobial PEO-treated surfaces to identify the 'finish line' in the race for antimicrobial implant surfaces.

HIF-1α Regulates Bone Homeostasis and Angiogenesis, Participating in the Occurrence of Bone Metabolic Diseases

In the physiological condition, the skeletal system's bone resorption and formation are in dynamic balance, called bone homeostasis. However, bone homeostasis is destroyed under pathological conditions, leading to the occurrence of bone metabolism diseases. The expression of hypoxia-inducible factor-1α (HIF-1α) is regulated by oxygen concentration. It affects energy metabolism, which plays a vital role in preventing bone metabolic diseases. This review focuses on the HIF-1α pathway and describes in detail the possible mechanism of its involvement in the regulation of bone homeostasis and angiogenesis, as well as the current experimental studies on the use of HIF-1α in the prevention of bone metabolic diseases. HIF-1α/RANKL/Notch1 pathway bidirectionally regulates the differentiation of macrophages into osteoclasts under different conditions. In addition, HIF-1α is also regulated by many factors, including hypoxia, cofactor activity, non-coding RNA, trace elements, etc. As a pivotal pathway for coupling angiogenesis and osteogenesis, HIF-1α has been widely studied in bone metabolic diseases such as bone defect, osteoporosis, osteonecrosis of the femoral head, fracture, and nonunion. The wide application of biomaterials in bone metabolism also provides a reasonable basis for the experimental study of HIF-1α in preventing bone metabolic diseases.

Strontium-incorporated bioceramic scaffolds for enhanced osteoporosis bone regeneration

The restoration of bone defects caused by osteoporosis remains a challenge for surgeons. Strontium ranelate has been applied in preventative treatment approaches due to the biological functions of the trace element strontium (Sr). In this study, we aimed to fabricate bioactive scaffolds through Sr incorporation based on our previously developed modified amino-functional mesoporous bioactive glass (MBG) and to systematically investigate the bioactivity of the resulting scaffold in vitro and in vivo in an osteoporotic rat model. The results suggested that Sr-incorporated amino-functional MBG scaffolds possessed favorable biocompatibility. Moreover, with the incorporation of Sr, osteogenic and angiogenic capacities were upregulated in vitro. The in vivo results showed that the Sr-incorporated amino-functional MBG scaffolds achieved better bone regeneration and vessel formation. Furthermore, bioinformatics analysis indicated that the Sr-incorporated amino-functional MBG scaffolds could reduce reactive oxygen species levels in bone marrow mesenchymal stem cells in the osteoporotic model by activating the cAMP/PKA signaling pathway, thus playing an anti-osteoporosis role while promoting osteogenesis. This study demonstrated the feasibility of incorporating trace elements into scaffolds and provided new insights into biomaterial design for facilitating bone regeneration in the treatment of osteoporosis.

Nanostructured Cu-doped TiO2 with photothermal effect for prevention of implant-associated infection

Bacterial infection of titanium (Ti) dental implants is still a major clinical complication. In this study, a combination of copper (Cu) ions and photothermal therapy is used to combat implant-associated infection. Cu doped TiO₂ (TiO₂-Cu) films were prepared on Ti by magnetron sputtering and subsequently annealing. TiO₂-Cu films had efficient photothermal conversion ability due to the generated nanostructure during the annealing process. Under the irradiation of 808 near infrared light, the combined actions of hyperthermia and Cu ions gave rise to excellent antibacterial activity against Streptococcus mutans on Ti as demonstrated by the experiments conducted in vitro and in vivo. The TiO₂-Cu films also exhibited excellent biocompatibility. In addition, the surface hardness and corrosion resistance of TiO₂-Cu films were greatly improved.

Osteoblastic Cell Responses of Copper Nanoparticle Coatings on Ti-6Al-7Nb Alloy Using Electrophoretic Deposition Method

Aim

To investigate and compare the cell cytotoxicity, proliferation, cell attachment, and morphology of human fetal osteoblasts (hFOB) cells of coated samples (titanium nanocopper (Ti Cu), titanium nanohydroxyapatite (Ti HA) and titanium nanocopper ion doped hydroxyapatite (Ti Cu/HA) and uncoated samples (Ti) in order to assess the suitability of these surface modifications on Ti-6Al-7Nb for dental implant application.

Materials and Methods

The cytotoxicity was studied by examining the hFOB cell response by MTT assessment. The cell morphology was evaluated by inverted microscopy and observed under scanning electronic microscopy (SEM).

Results

MTT assay results displayed that the Cu content on the surface of Ti-6Al-7Nb alloys did not produce any cytotoxic effect on cell viability. The cell viability rate in all samples ranges from 97% to 126%, indicating that hFOB cells grew at a high proliferation rate. However, no significant differences in cell viability were observed between Ti and Ti Cu and between Ti HA and Ti Cu/HA groups. Microscopic examination demonstrated no difference in the cell morphology of hFOB among all samples. In addition, SEM observation indicated favorable adhesion and spreading of the cells on the coated and uncoated samples.

Conclusions

The surface modification of Ti-6Al-7Nb alloy with Cu, HA, and Cu/HA exhibits good cell biocompatibility, and the Cu has no influence on the cell proliferation and differentiation of hFOB.

Study on TiO2 Nanofilm That Reduces the Heat Production of Titanium Alloy Implant in Microwave Irradiation and Does Not Affect Fracture Healing

Background

Metal implants can produce heat and damage adjacent tissues under microwave irradiation, which makes local metal implants in the body a contraindication for microwave therapy. However, with the wide application of titanium alloy implants which have low permeability and low conductivity, this concept has been challenged. Our team members have confirmed through previous research that continuous low-power microwave irradiation does not cause thermal damage to the surrounding tissues of the titanium alloy. Is there any other way to further increase the dose of microwave irradiation while reducing the heat production of titanium alloy implants? In this study, the effect of TiO₂ nanofilm on reducing the heat production of titanium alloy implants in microwave field was verified by animal experiments, and the effect of TiO₂ nanofilm on fracture healing was observed.

Methods

30 rabbits were selected. In the experiment of temperature measurement, 10 rabbits were randomly divided into experimental group (n = 5) and control group (n = 5), and the contralateral lower limb of the rabbits in experimental group was set as the sham operation group. The right femurs in the experimental group were implanted with Ti6Al4V plates coated with TiO₂ nanofilm, and the right femurs in the control group were implanted with common titanium alloy plates without TiO₂ nanofilm. The same surgical procedure was used in the sham operation group, but no plate was implanted. The temperature of the deep tissue above the metal implant was measured with an anti-interference thermocouple thermometer during 20 minutes of microwave irradiation. The other 20 rabbits were randomly divided into two groups, experimental group (n = 10) and control group (n = 10). The femoral shaft fracture models were established again. Ti6Al4V plates coated with TiO₂ nanofilm and common titanium alloy plates were implanted in the two groups, respectively, and both groups were exposed to continuous microwave irradiation with a power of 40 W or 60 W for 30 days after operation. The fracture healing was evaluated by X-ray at 0 day, 14 days, and 30 days after microwave irradiation, respectively. The animals were sacrificed at 30 days after operation for histopathological assessment.

Results

The temperature in the experimental group, control group, and sham operation group increased significantly after 40 W and 60 W microwave irradiation (2.18 ± 0.15°C~6.02 ± 0.38°C). When exposed to 40 W microwave, the temperature rise of the control group was 4.0 ± 0.34°C, which was significantly higher than that of the experimental group 2.82 ± 0.15°C (P < 0.01) and the sham operation group 2.18 ± 0.33°C (P < 0.01). There was no significant difference in temperature rise between the experimental group and the sham operation group (P = 0.21). When exposed to 60 W microwave, the temperature rise of the control group was 6.02 ± 0.38°C, which was significantly higher than that of the experimental group 3.66 ± 0.14°C (P < 0.01) and sham operation group 2.96 ± 0.22°C (P < 0.01), and there was no significant difference between the experimental group and the sham operation group (P = 0.32). X-ray evaluation showed that there was no significant difference in callus maturity between the experimental group and the control group at 14 days (P = 0.554), but there was significant difference in callus maturity between the two groups at 30 days (P = 0.041). The analysis of bone histologic and histomorphometric data at 30 days was also consistent with this.

Conclusion

Under the animal experimental condition, compared with the common titanium alloy implant, the TiO₂ nanofilm can reduce the heat production of the titanium alloy implant in the 2450 MHz microwave field and has no adverse effect on fracture healing. This study opens up a promising new idea for the application of microwave therapy to metal implants in human body.

Promoting osteointegration effect of Cu alloyed titanium (TiCu) in ovariectomized rats

Osteoporosis is a common skeletal disease making patients be prone to the osteoporotic fracture. However, the clinical implants made of titanium and its alloys with a poor osseointegration need a long time for healing and easily to loosening. Thus, a new class of Cu-alloyed titanium (TiCu) alloys with excellent mechanical properties and bio-functionalization has been developed. In this study, the osteoporosis modeled rats were used to study the osteointegration effect and underlying mechanism of TiCu. The results showed that after implantation for 4 weeks, TiCu alloy could promote the reconstruction of vascular network around the implant by up-regulating vascular endothelial growth factor expression. After 8 weeks, it could further promote the proliferation and differentiation of osteoblasts, mineralization and deposition of collagens, and then significantly increasing bone mineral density around the implant. In conclusion, TiCu alloy would enhance the fixation stability, accelerate the osteointegration, and thus reduce the risk of aseptic loosening during the long-term implantation in the osteoporosis environment. This study was the first to report the role and mechanism of a Cu-alloyed metal in promoting osteointegration in osteoporosis environment, which provides a new attractive support for the improvement of future clinical applications of Cu-alloyed antibacterial titanium alloys.

The osteogenesis of Ginsenoside Rb1 incorporated silk/micro-nano hydroxyapatite/sodium alginate composite scaffolds for calvarial defect

Ginsenoside Rb1, the effective constituent of ginseng, has been demonstrated to play favorable roles in improving the immunity system. However, there is little study on the osteogenesis and angiogenesis effect of Ginsenoside Rb1. Moreover, how to establish a delivery system of Ginsenoside Rb1 and its repairment ability in bone defect remains elusive. In this study, the role of Ginsenoside Rb1 in cell viability, proliferation, apoptosis, osteogenic genes expression, ALP activity of rat BMSCs were evaluated firstly. Then, micro-nano HAp granules combined with silk were prepared to establish a delivery system of Ginsenoside Rb1, and the osteogenic and angiogenic effect of Ginsenoside Rb1 loaded on micro-nano HAp/silk in rat calvarial defect models were assessed by sequential fluorescence labeling, and histology analysis, respectively. It revealed that Ginsenoside Rb1 could maintain cell viability, significantly increased ALP activity, osteogenic and angiogenic genes expression. Meanwhile, micro-nano HAp granules combined with silk were fabricated smoothly and were a delivery carrier for Ginsenoside Rb1. Significantly, Ginsenoside Rb1 loaded on micro-nano HAp/silk could facilitate osteogenesis and angiogenesis. All the outcomes hint that Ginsenoside Rb1 could reinforce the osteogenesis differentiation and angiogenesis factor’s expression of BMSCs. Moreover, micro-nano HAp combined with silk could act as a carrier for Ginsenoside Rb1 to repair bone defect.

Mg/Cu-doped TiO2 nanotube array: A novel dual-function system with self-antibacterial activity and excellent cell compatibility

Many studies were conducted to change the surface morphology and chemical composition of Ti implants for the improvement of antibacterial ability and osseointegration between medical Ti and surrounding bone tissue. In this study, we successfully prepared a novel dual-function coating on pure Ti surface, i.e. Cu and Mg-co-doped TiO₂ nanotube (TN) coating, by combining anodisation and hydrothermal treatment (HT), which could act as a delivery platform for the sustained release of Cu and Mg ions. Results showed that the amounts of Cu and Mg were about 5.43 wt%-6.55 wt% and 0.69 wt%-0.73 wt%, respectively. In addition, the surface morphology of Cu and Mg-co-doped TN (CuMTN) coatings transformed into nanoneedles after HT for 1 h. Compared with TN, CuMTN had no change in roughness and remarkable improved hydrophilicity. Antibacterial tests revealed that CuMTN had an antibacterial rate of more than 93% against Escherichia coli and Staphylococcus aureus, thereby showing excellent antibacterial properties. In addition, CuMTN could induce the formation of apatite well after being immersed in simulated body fluid, showing good biological activity. Preosteoblasts (MC3T3-E1) cultured on CuMTN-coated Ti demonstrated better proliferation and osteogenic differentiation than pristine and as-anodised specimens. To the best of our best knowledge, this study had successfully attempted to combine anodisation and HT, introduce Cu/Mg elements and functionalise Ti-based implant surfaces with enhanced hydrophilicity, osteogenesis and antimicrobial properties that can meet clinical needs for the first time.

Biological applications of copper-containing materials

Copper is an indispensable trace metal element in the human body, which is mainly absorbed in the stomach and small intestine and excreted into the bile. Copper is an important component and catalytic agent of many enzymes and proteins in the body, so it can influence human health through multiple mechanisms. Based on the biological functions and benefits of copper, an increasing number of researchers in the field of biomaterials have focused on developing novel copper-containing biomaterials, which exhibit unique properties in protecting the cardiovascular system, promoting bone fracture healing, and exerting antibacterial effects. Copper can also be used in promoting incisional wounds healing, killing cancer cells, Positron Emission Tomography (PET) imaging, radioimmunological tracing and radiotherapy of cancer. In the present review, the biological functions of copper in the human body are presented, along with an overview of recent progress in our understanding of the biological applications and development of copper-containing materials. Furthermore, this review also provides the prospective on the challenges of those novel biomaterials for future clinical applications.

Influence of Cu2+ on Osteoclast Formation and Activity In Vitro

Background: Copper-containing biomaterials are increasingly applied for bone regeneration due to their pro-angiogenetic, pro-osteogenetic and antimicrobial properties. Therefore, the effect of Cu²⁺ on osteoclasts, which play a major role in bone remodeling was studied in detail. Methods: Human primary osteoclasts, differentiated from human monocytes were differentiated or cultivated in the presence of Cu²⁺. Osteoclast formation and activity were analyzed by measurement of osteoclast-specific enzyme activities, gene expression analysis and resorption assays. Furthermore, the glutathione levels of the cells were checked to evaluate oxidative stress induced by Cu²⁺. Results: Up to 8 µM Cu²⁺ did not induce cytotoxic effects. Activity of tartrate-resistant acid phosphatase (TRAP) was significantly increased, while other osteoclast specific enzyme activities were not affected. However, gene expression of TRAP was not upregulated. Resorptive activity of osteoclasts towards dentin was not changed in the presence of 8 µM Cu²⁺ but decreased in the presence of extracellular bone matrix. When Cu²⁺ was added to mature osteoclasts TRAP activity was not increased and resorption decreased only moderately. The glutathione level of both differentiating and mature osteoclasts was significantly decreased in the presence of Cu²⁺. Conclusions: Differentiating and mature osteoclasts react differently to Cu²⁺. High TRAP activities are not necessarily related to high resorption.

A multifunctional electrowritten bi-layered scaffold for guided bone regeneration

The guided bone regeneration (GBR) concept has been extensively utilized to treat maxillofacial bone defects in clinical practice. However, the repair efficacy of currently available GBR membranes is often compromised by their limited bone regeneration potential and deficient antibacterial activity. In this study, inspired by the bi-layered structure design of the commonly used Bio-Gide^Ⓡmembrane, we designed and fabricated a new kind of multifunctional bi-layered "GBR scaffold" combining solution electrospinning writing (SEW) and solution electrospinning (SES) techniques using a single SEW printer. Copper-loaded mesoporous silica nanoparticles (Cu@MSNs) were incorporated into the poly(lactic-co-glycolic acid)/gelatin (PLGA/Gel, denoted as PG) fiber matrix to construct a composite PG-Cu@MSNs fibrous scaffold. The obtained GBR scaffold consisted of a loose and porous SEW layer to support and facilitate bone ingrowth, and a dense and compact SES layer to resist non-osteoblast interference. The resulting enhanced mechanical properties, coordinated degradation profile, and facile preparation procedure imparted the composite scaffold with good clinical feasibility. In vitro biological experiments indicate that the PG-Cu@MSNs composite scaffold exhibited favorable osteogenic and antibacterial properties. Furthermore, an in vivo rat periodontal defect model further confirmed the promising bone regeneration efficacy of the PG-Cu@MSNs scaffold. In conclusion, the developed electrowritten Cu@MSNs-incorporated bi-layered scaffold with hierarchical architecture and concurrent osteogenic and antibacterial functions may hold great potential for application in GBR.

Biofunctional Elements Incorporated Nano/Microstructured Coatings on Titanium Implants with Enhanced Osteogenic and Antibacterial Performance

Bone fracture is prevalent among athletes and senior citizens and may require surgical insertion of bone implants. Titanium (Ti) and its alloys are widely used in orthopedics due to its high corrosion resistance, good biocompatibility, and modulus compatible with natural bone tissues. However, bone repair and regrowth are impeded by the insufficient intrinsic osteogenetic capability of Ti and Ti alloys and potential bacterial infection. The physicochemical properties of the materials and nano/microstructures on the implant surface are crucial for clinical success and loading with biofunctional elements such as Sr, Zn, Cu, Si, and Ag into nano/microstructured TiO2 coating has been demonstrated to enhance bone repair/regeneration and bacterial resistance of Ti implants. In this review, recent advances in biofunctional element-incorporated nano/microstructured coatings on Ti and Ti alloy implants are described and the prospects and limitations are discussed.

β-FeOOH/Fe-TiO2 heterojunctions on Ti for bacteria inactivation under light irradiation and biosealing

Intraosseous transcutaneous implants transferring mechanical stress directly from the skeleton to a prosthesis are an area of biological mechanics. However, bacterial invasion and weak biosealing with skin tissue usually induce implant failure. In this paper, composite coatings consisting of β-FeOOH as an outer layer and Fe-TiO₂ as an inner layer were prepared on Ti via micro-arc oxidation and hydrothermal treatment (HT). The surface microstructures and optical absorption properties of the coatings were observed, the production of reactive oxygen species (ROS) was measured, Staphylococcus aureus (S. aureus) and fibroblast behaviors were studied in vitro, and bacteria inactivation and skin tissue responses on different surfaces were evaluated in vivo. The results show that Fe³⁺ was doped into TiO₂ and β-FeOOH nanoparticles were gradually deposited on TiO₂ during HT treatment, forming β-FeOOH/Fe-TiO₂ heterojunctions. The light absorption of the composite coatings shifted to the longer wavelength region because of a narrowed TiO₂ bandgap and the formation of heterojunctions. Under light irradiation, photoinduced electrons and holes on the heterojunctions were separated efficiently. Via optimizing the amount of Fe³⁺ in TiO₂, ROS that formed at the heterojunctions after light irradiation for 10 min could kill 80% of S. aureus compared with pure Ti in vitro, but they did not affect fibroblast behavior, including proliferation and phenotyping. In vivo, the optimized β-FeOOH/Fe-TiO₂ heterojunctions, upon light irradiation, could inhibit bacterial infection, suppress an inflammatory response, and promote integration with skin tissue. Such results provide a new perspective suggesting the potential application of β-FeOOH/Fe-TiO₂ heterojunctions in percutaneous Ti implants, especially in infected cases.

Antibacterial Property and Biocompatibility of Silver, Copper, and Zinc in Titanium Dioxide Layers Incorporated by One-Step Micro-Arc Oxidation: A Review

Titanium (Ti) and its alloys are commonly used in medical devices. However, biomaterial-associated infections such as peri-implantitis and prosthetic joint infections are devastating and threatening complications for patients, dentists, and orthopedists and are easily developed on titanium surfaces. Therefore, this review focuses on the formation of biofilms on implant surfaces, which is the main cause of infections, and one-step micro-arc oxidation (MAO) as a coating technology that can be expected to prevent infections due to the implant. Many researchers have provided sufficient data to prove the efficacy of MAO for preventing the initial stages of biofilm formation on implant surfaces. Silver (Ag), copper (Cu), and zinc (Zn) are well used and are incorporated into the Ti surface by MAO. In this review, the antibacterial properties, cytotoxicity, and durability of these elements on the Ti surface incorporated by one-step MAO will be summarized. This review is aimed at enhancing the importance of the quantitative control of Ag, Cu, and Zn for their use in implant surfaces and the significance of the biodegradation behavior of these elements for the development of antibacterial properties.

Zn- or Cu-containing CaP-Based Coatings Formed by Micro-Arc Oxidation on Titanium and Ti-40Nb Alloy: Part II-Wettability and Biological Performance

This work describes the wettability and biological performance of Zn- and Cu-containing CaP-based coatings prepared by micro-arc oxidation on pure titanium (Ti) and novel Ti-40Nb alloy. Good hydrophilic properties of all the coatings were demonstrated by the low contact angles with liquids, not exceeding 45°. An increase in the applied voltage led to an increase of the coating roughness and porosity, thereby reducing the contact angles to 6° with water and to 17° with glycerol. The free surface energy of 75 ± 3 mJ/m² for all the coatings were determined. Polar component was calculated as the main component of surface energy, caused by the presence of strong polar PO₄³⁻ and OH⁻ bonds. In vitro studies showed that low Cu and Zn amounts (~0.4 at.%) in the coatings promoted high motility of human adipose-derived multipotent mesenchymal stromal cells (hAMMSC) on the implant/cell interface and subsequent cell ability to differentiate into osteoblasts. In vivo study demonstrated 100% ectopic bone formation only on the surface of the CaP coating on Ti. The Zn- and Cu-containing CaP coatings on both substrates and the CaP coating on the Ti-40Nb alloy slightly decreased the incidence of ectopic osteogenesis down to 67%. The MAO coatings showed antibacterial efficacy against Staphylococcus aureus and can be arranged as follows: Zn-CaP/Ti > Cu-CaP/TiNb, Zn-CaP/TiNb > Cu-CaP/Ti.

Study of Sr-Ca-Si-based scaffolds for bone regeneration in osteoporotic models

Bone tissue engineering has emerged as a promising alternative therapy for patients who suffer bone fractures or defects caused by trauma, congenital diseases or tumours. However, the reconstruction of bone defects combined with osteoporosis remains a great challenge for clinicians and researchers. Based on our previous study, Ca–Si-based bioceramics (MSCs) showed enhanced bone formation capabilities under normal conditions, and strontium was demonstrated to be therapeutic in promoting bone quality in osteoporosis patients. Therefore, in the present study, we attempted to enlarge the application range of MSCs with Sr incorporation in an osteoporotic bone regeneration model to evaluate whether Sr could assist in regeneration outcomes. In vitro readout suggested that Sr-incorporated MSC scaffolds could enhance the expression level of osteogenic and angiogenic markers of osteoporotic bone mesenchymal stem cells (OVX BMSCs). Animal experiments showed a larger new bone area; in particular, there was a tendency for blood vessel formation to be enhanced in the Sr-MSC scaffold group, showing its positive osteogenic capacity in bone regeneration. This study systematically illustrated the effective delivery of a low-cost therapeutic Sr agent in an osteoporotic model and provided new insight into the treatment of bone defects in osteoporosis patients.

Zn- or Cu-Containing CaP-Based Coatings Formed by Micro-arc Oxidation on Titanium and Ti-40Nb Alloy: Part I-Microstructure, Composition and Properties

Zn- and Cu-containing CaP-based coatings, obtained by micro-arc oxidation process, were deposited on substrates made of pure titanium (Ti) and novel Ti-40Nb alloy. The microstructure, phase, and elemental composition, as well as physicochemical and mechanical properties, were examined for unmodified CaP and Zn- or Cu-containing CaP coatings, in relation to the applied voltage that was varied in the range from 200 to 350 V. The unmodified CaP coatings on both types of substrates had mainly an amorphous microstructure with a minimal content of the CaHPO₄ phase for all applied voltages. The CaP coatings modified with Zn or Cu had a range from amorphous to nano- and microcrystalline structure that contained micro-sized CaHPO₄ and Ca(H₂PO₄)₂·H₂O phases, as well as nano-sized β-Ca₂P₂O₇, CaHPO₄, TiO₂, and Nb₂O₅ phases. The crystallinity of the formed coatings increased in the following order: CaP/TiNb < Zn-CaP/TiNb < Cu-CaP/TiNb < CaP/Ti < Zn-CaP/Ti < Cu-CaP/Ti. The increase in the applied voltage led to a linear increase in thickness, roughness, and porosity of all types of coatings, unlike adhesive strength that was inversely proportional to an increase in the applied voltage. The increase in the applied voltage did not affect the Zn or Cu concentration (~0.4 at%), but led to an increase in the Ca/P atomic ratio from 0.3 to 0.7.

Anti-Bacterial and Anti-Fouling Capabilities of Poly(3,4-Ethylenedioxythiophene) Derivative Nanohybrid Coatings on SUS316L Stainless Steel by Electrochemical Polymerization

We have successfully fabricated poly(3,4-ethylenedioxythiophene) (PEDOT) derivative nanohybrid coatings on flexible SUS316L stainless steel by electrochemical polymerization, which can offer anti-fouling and anti-bacterial capabilities. PEDOT derivative nanohybrids were prepared from polystyrene sulfonates (PSS) and graphene oxide (GO) incorporated into a conducting polymer of PEDOT. Additionally, the negative charge of the PEDOT/GO substrate was further modified by poly-diallyldimethylammonium chloride (PDDA) to form a positively charged surface. These PEDOT derivative nanohybrid coatings could provide a straightforward means of controlling the surface energy, roughness, and charges with the addition of various derivatives in the electrochemical polymerization and electrostatically absorbed process. The characteristics of the PEDOT derivative nanohybrid coatings were evaluated by Raman spectroscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle, and surface potential (zeta potential). The results show that PEDOT/PSS and PEDOT/GO nanohybrid coatings exhibit excellent anti-fouling capability. Only 0.1% of bacteria can be adhered on the surface due to the lower surface roughness and negative charge surface by PEDOT/PSS and PEDOT/GO modification. Furthermore, the anti-bacterial capability (7 mm of inhibition zone) was observed after adding PDDA on the PEDOT/GO substrates, suggesting that the positive charge of the PEDOT/GO/PDDA substrate can effectively kill bacteria (Staphylococcus aureus). Given their anti-fouling and anti-bacterial capabilities, PEDOT derivative nanohybrid coatings have the potential to be applied to biomedical devices such as cardiovascular stents and surgical apparatus.

Enzyme responsive titanium substrates with antibacterial property and osteo/angio-genic differentiation potentials

After implantation into a host, titanium (Ti) orthopaedic materials are facing two major clinical challenges: bacterial infection and aseptic loosening, which directly determine the long-term survival of the implant. To endow Ti implant with self-defensive antibacterial properties and desirable osteo/angio-genic differentiation potentials, hyaluronic acid (HA)-gentamicin (Gen) conjugates (HA-Gen) and chitosan (Chi) polyelectrolyte multilayers were constructed on deferoxamine (DFO) loaded titania nanotubes (TNT) substrates via layer-by-layer (LBL) assembly technique, termed as TNT/DFO/HA-Gen. The HA-Gen conjugate was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H NMR). The physicochemical properties of the substrates were characterized by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle measurements. The on-demand DFO release was associated with the degradation of multilayers triggered by exogenous hyaluronidase, which indicated enzymatic and bacterial responsiveness. The TNT/DFO/HA-Gen substrates displayed effective antifouling and antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), while were favourable for the adhesion, proliferation and osteo/angio-genic differentiation of mesenchymal stem cells (MSCs). The multifaceted drug-device combination (DDC) strategy showed potential applications in orthopaedic fields.

Dose-response relationships between copper and its biocompatibility/antibacterial activities

BACKGROUND

Copper has already been widely used in the modification of biomaterials because it possesses multifunctional biological effects like osteogenic, angiogenic and antibacterial activities. However, it is still not clear how different cell lines and bacteria will respond to different concentrations of Cu²⁺, which is very critical to the application of copper-doped implants.

METHODS

This study aimed to explore the dose-response relationships of Cu²⁺ and its biological effects in vitro. Rat bone marrow mesenchymal stem cell (rBMSCs), mouse osteoblastic cell line (MC3T3-E1), and human umbilical vein endothelial cells (HUVECs) were used to evaluate cellular behaviors. Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were used to evaluate bacterial behaviors.

RESULTS

Results showed that the HUVECs exhibited significantly higher tolerance to copper ions than MC3T3-E1 and rBMSCs. The IC₅₀ values of copper for HUVECs, MC3T3-E1 and HUVECs were approximated to 327.9 μM, 134.6 μM, and 0.7 μM, respectively. Besides, the threshold concentration of copper for effective inhibition against bacteria growth is 37 μM. When the concentration exceeded the threshold value, antibacterial activity could increase dramatically.

CONCLUSIONS

These results altogether establish a technological foundation for the application of copper-doped biomaterials in bone growth and remodeling.

Osteogenic activity and antibacterial ability on titanium surfaces modified with magnesium-doped titanium dioxide coating

Aim: To improve the bioactivity and antibacterial activity of titanium (Ti) implants. Materials & methods: Magnesium (Mg)-doped titanium dioxide microporous coatings (Mg-TiO₂) were prepared on the surface of Ti implants by plasma electrolytic oxidation. Results: Ti surfaces were covered with porous Mg-TiO₂, and Mg was evenly distributed throughout the coating. Mg-TiO₂ could not only promote osteoblast adhesion, proliferation and differentiation but also inhibit the colonization and growth of Staphylococcus. In addition, Mg-TiO₂ may promote osteogenesis through the ERK/c-Fos signaling pathway as well as the early osseointegration of Ti implants. Conclusion: Mg-TiO₂ has both osteogenic and antibacterial effects and thus presents important theoretical significance and clinical potential.

Characterization, Bioactivity and Antibacterial Properties of Copper-Based TiO2 Bioceramic Coatings Fabricated on Titanium

The bioactive and anti-bacterial Cu-based bioceramic TiO2 coatings have been fabricated on cp-Ti (Grade 2) by two-steps. These two-steps combine micro-arc oxidation (MAO) and physical vapor deposition–thermal evaporation (PVD-TE) techniques for dental implant applications. As a first step, all surfaces of cp-Ti substrate were coated by MAO technique in an alkaline electrolyte, consisting of Na3PO4 and KOH in de-ionized water. Then, as a second step, a copper (Cu) nano-layer with 5 nm thickness was deposited on the MAO by PVD-TE technique. Phase structure, morphology, elemental amounts, thickness, roughness and wettability of the MAO and Cu-based MAO coating surfaces were characterized by XRD (powder- and TF-XRD), SEM, EDS, eddy current device, surface profilometer and contact angle goniometer, respectively. The powder- and TF-XRD spectral analyses showed that Ti, TiO2, anatase-TiO2 and rutile-TiO2 existed on the MAO and Cu-based MAO coatings’ surfaces. All coatings’ surfaces were porous and rough, owing to the presence of micro sparks through MAO. Furthermore, the surface morphology of Cu-based MAO was not changed. Also, the Cu-based MAO coating has more hydrophilic properties than the MAO coating. In vitro bioactivity and in vitro antibacterial properties of the coatings have been investigated by immersion in simulated body fluid (SBF) at 36.5 °C for 28 days and bacterial adhesion for gram-positive (S. aureus) and gram-negative (E. coli) bacteria, respectively. The apatite layer was formed on the MAO and Cu-based MAO surfaces at post-immersion in SBF and therefore, the bioactivity of Cu-based MAO surface was increased to the MAO surface. Also, for S. aureus and E. coli, the antibacterial properties of Cu-based MAO coatings were significantly improved compared to one of the uncoated MAO surfaces. These results suggested that Cu-based MAO coatings on cp-Ti could be a promising candidate for biomedical dental implant applications.

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface

The micro arc oxidation (MAO) coatings with different concentrations of Ca, P and Zn elements are successfully formed on the titanium substrate at the different applied voltages. After MAO treatment, the MAO coating exhibits the porous surface structure and composed of anatase and rutile TiO2 phases. Meanwhile, the average size and density of micro-pores on the MAO coatings have been modified via the adjusting the applied voltages. In addition, the contents of the incorporated elements such as Zn, Ca and P elements in the MAO coatings have been optimized. The bonding strength test results reveal that the MAO coating shows higher bonding strength, which is up to 45 ± 5 MPa. Compared to the pure Ti plate, the MAO coating formed at 350 and 400 V show good apatite-inducing ability. Meanwhile, the MAO coating containing Zn, Ca and P elements have better antibacterial ability for E.coli and S.aureus. Thus, the incorporation of Zn, Ca and P elements was an effective method to improve the antibacterial ability. Moreover, the concentrations of Zn, Ca and P elements could be adjusted with the changing of the applied voltages. As a result, the enhancement of the antibacterial ability on the MAO coating surfaces was depended on the comprehensive effect of the incorporated elements and the surface property of MAO coatings.

Intrinsically ferromagnetic Fe-doped TiO2 coatings on titanium for accelerating osteoblast response in vitro

The microenvironment can regulate osteoblast behavior during integration of implants with host bones. An intrinsically magnetic field induced by an Fe³⁺ doped TiO₂ coating was applied herein to enhance the cytocompatibility of Ti. Porous TiO₂ incorporated with different amounts of Fe (2.27-11.07 wt%) was directly prepared on Ti by micro-arc oxidation. The microstructure, roughness, wettability, ion releasing and magnetic property of TiO₂ coatings were investigated. Cell behavior, including adhesion, proliferation, differentiation, collagen secretion and extracellular matrix mineralization on coating surfaces was evaluated. The results show that incorporation of Fe³⁺ did not significantly alter the phase component, topography, roughness and wettability of coatings, and with increased doses of Fe³⁺, trace amounts of Fe³⁺ were released into the media, whereas the Ca²⁺ accumulation concentration slightly decreased. Fe-Doped TiO₂ displayed a weak ferromagnetic property, and its saturation magnetization value increased initially and then decreased with the increased dose of Fe. Compared with the undoped, proliferation, expression of osteogenesis-related genes, collagen secretion and extracellular matrix mineralization of osteoblasts were enhanced with Fe doped ones, especially for those with 4.25 wt% Fe. By analyzing the structures and properties of different surfaces and their osteoblast responses, it is deduced that the ferromagnetism of Fe doped TiO₂ plays a key role in enhancing osteoblast behavior. Such a result provides a new perspective for the potential application of ferromagnetic coatings in bone repair.

Introducing copper and collagen (via poly(DOPA)) coating to activate inert ceramic scaffolds for excellent angiogenic and osteogenic capacity

Traditional calcium polyphosphate (CPP) scaffolds have attracted wide attention for repairing bone defects owing to their low cytotoxicity and controllable degradation. However, because of poor mechanical strength, significant brittleness and suboptimal osteoinductivity and osteoconductivity, their further clinical applications are restricted. To overcome these limitations, collagen (Col) coated Cu(ii) ion-doped calcium polyphosphate (CCPP) scaffolds were employed and dopamine (DOPA) was used as a linkage (CCPP/D/Col) to ensure their stable and tight structure. Controllable Cu(ii) ion continuously released from scaffolds together with collagen coating could simultaneously enhance the cytocompatibility, compressive strength and ductility, bone-related gene expression and new bone regeneration. In comparison with the initial CPP specimens, these multifunctional CCPP/D/Col composite scaffolds' crystal grains of CCPP were arranged regularly and well-ordered, and the size and rugosity were more suitable for cell spreading and attachment. Murine bone marrow stem cells (BMSCs) seeded on CCPP/D/Col scaffolds possessed better proliferation and migration, rapid attachment and enhanced expression of osteogenic-related genes, which indicated better bone regeneration. The potential mechanism of this process was further elucidated. Both copper doping and collagen coating could effectively stabilize hypoxia-inducible factor-1α (HIF-1α) that thus stimulates the expression of vascular endothelial growth factor (VEGF). In addition, they could also promote the osteogenic differentiation of cells through stimulating bone-related gene expression. The concept of introducing active ions and biological macromolecules to modify inert ceramics may offer a new strategy to construct a multifunctional composite scaffold for bone tissue regeneration.

Effects of copper nanoparticles in porous TiO2 coatings on bacterial resistance and cytocompatibility of osteoblasts and endothelial cells

Copper (Cu) has garnered increasing interest due to its excellent antimicrobial activity and important roles in human metabolism. Although the biological effects of Cu have been studied, the effects of Cu nanoparticles (NPs) on cell behavior are not well understood. In this study, porous TiO₂ coatings doped with different amounts of Cu NPs (designated as 0 Cu, 0.3 Cu, and 3.0 Cu) are deposited on titanium by micro-arc oxidation (MAO). The Cu NPs coated samples exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus). In vitro cytocompatibility evaluation discloses that 0 Cu and 0.3 Cu have no toxicity to osteoblasts but 3.0 Cu shows cytotoxicity. 0.3 Cu promotes proliferation and adhesion of osteoblasts and enhances extracellular matrix mineralization (ECM), but has little effects on the alkaline phosphatase activity (ALP) and collagen secretion. Surprisingly, the Cu NPs coated samples show a different behavior with endothelial cells. Both 0.3 Cu and 3.0 Cu show no cytotoxicity on endothelial cells and promote cell proliferation. Production of nitric oxide (NO) and secretion of vascular endothelial growth factor (VEGF) by the endothelial cells are observed from the Cu NPs doped TiO₂ coatings.

M2 macrophages contribute to osteogenesis and angiogenesis on nanotubular TiO2 surfaces

The monocyte/macrophage system plays an essential role in the host response and the fate of endosseous implanted materials. Macrophage behavior was thought to be regulated by nanostructured titanium which has been considered as a very promising candidate for dental implants. However, there is little known for subsequent effects of these activated macrophages on osteogenesis and angiogenesis which were essential for bone integration. Here we presented two different dimensions of titanium nanotubes generated by anodic oxidation at 10 V (NT 10) and 20 V (NT 20), respectively. The behavior of macrophages on the surfaces was evaluated, and their conditioned medium (CM) was collected to stimulate MC3T3 and HUVECs, with commercially pure titanium (cp Ti) as control. We found that NT 20 induced macrophage activation similar to the anti-inflammatory M2 macrophage state with the enhanced expression of IL-10 and ARG, while NT 10 was associated with M1 macrophage phenotype characterized by high levels of IL-1β, iNOS and TNF-α. Furthermore, the osteogenic capacity of MC3T3 in CM from NT 20 was enhanced (NT 20 > NT 10 ≈ cp Ti) and the tube formation capacity of HUVECs was promoted in CM from nanotubular surfaces with increasing tube dimensions (NT 20 > NT 10 > cp Ti). Our data suggest that dental implants with the large nanotube dimension surface could result in a favorable osteoimmunomodulatory microenvironment for the establishment of osseointegration.

Effects of Sr-HT-Gahnite on osteogenesis and angiogenesis by adipose derived stem cells for critical-sized calvarial defect repair

Tissue engineering strategies to construct vascularized bone grafts are now attracting much attention. Strontium-hardystonite-Gahnite (Sr-HT-Gahnite) is a strong, highly porous, and biocompatible calcium silicate based bio-ceramic that contains strontium and zinc ions. Adipose derived stem cells (ASCs) have been demonstrated to have the ability in promoting osteogenesis and angiogenesis. In this study, the effects of Sr-HT-Gahnite on cell morphology, cell proliferation, and osteogenic differentiation of ASCs were systematically investigated. The cell proliferation, migration and angiogenic differentiation of human umbilical vein endothelial cell (HUVECs) were studied. Beta-tricalcium phosphate/hydroxyapatite (TCP/HA) bioceramic scaffolds were set as the control biomaterial. Both bio-ceramics exhibited no adverse influence on cell viability. The Sr-HT-Gahnite scaffolds promoted cell attachment and alkaline phosphatase (ALP) activity of ASCs. The Sr-HT-Gahnite dissolution products enhanced ALP activity, matrix mineralization, and angiogenic differentiation of ASCs. They could also improve cell proliferation, migration, and angiogenic differentiation of HUVECs. Levels of in vivo bone formation with Sr-HT Gahnite were significantly higher than that for TCP/HA. The combination of Sr-HT-Gahnite and ASCs promoted both osteogenesis and angiogenesis in vivo study, compared to Sr-HT-Gahnite and TCP/HA bio-ceramics when administered alone, suggesting Sr-HT-Gahnite can act as a carrier for ASCs for construction of vascularized tissue-engineered bone.

The dual function of Cu-doped TiO2 coatings on titanium for application in percutaneous implants

To endow percutaneous implants with improved skin integration and antibacterial activity, microporous TiO₂ coatings doped with different doses of Cu²⁺ (0-1.93 wt%) were directly fabricated on Ti via micro-arc oxidation (MAO). The structures of coatings were investigated; the adhesion, proliferation, phenotype, differentiation and extracellular collagen secretion of fibroblasts, as well as the response of Staphylococcus aureus (S. aureus), were also investigated. The obtained results show that microporous TiO₂ coatings all consist of antase and rutile, and incorporation of Cu²⁺ almost does not alter the phase component, surface roughness and topography of coating. Cu²⁺ facilitates the fibroblasts to switch to fibrotic phenotype and differentiate to myofibroblasts by enhancing the production of intracellular specific protein contents (connective tissue growth factor (CTGF) and alpha smooth muscle action (α-SMA)). Compared to Ti, the adhesion and proliferation of fibroblasts can be significantly enhanced on the TiO₂ coating with 0.67 wt% Cu, while greatly inhibited with 1.93 wt% Cu. The difference should be due to the compromise between the positive effectiveness and the cytotoxicity of Cu²⁺. Cu²⁺-doped TiO₂ coatings show good antibacterial properties, including contact-killing and release-killing of S. aureus, and these properties are positively related to the dose of Cu²⁺ in the coatings.

Antibacterial activity, osteogenic and angiogenic behaviors of copper-bearing titanium synthesized by PIII&D

Two types of Cu-bearing specimens with or without nanoparticles on Ti surface synthesized by PIII&D showed disparate biological responses.

A review on potential neurotoxicity of titanium dioxide nanoparticles

As the rapid development of nanotechnology in the past three decades, titanium dioxide nanoparticles (TiO2 NPs), for their peculiar physicochemical properties, are widely applied in consumer products, food additives, cosmetics, drug carriers, and so on. However, little is known about their potential exposure and neurotoxic effects. Once NPs are unintentionally exposed to human beings, they could be absorbed, and then accumulated in the brain regions by passing through the blood-brain barrier (BBB) or through the nose-to-brain pathway, potentially leading to dysfunctions of central nerve system (CNS). Besides, NPs may affect the brain development of embryo by crossing the placental barrier. A few in vivo and in vitro researches have demonstrated that the morphology and function of neuronal or glial cells could be impaired by TiO2 NPs which might induce cell necrosis. Cellular components, such as mitochondrial, lysosome, and cytoskeleton, could also be influenced as well. The recognition ability, spatial memory, and learning ability of TiO2 NPs-treated rodents were significantly impaired, which meant that accumulation of TiO2 NPs in the brain could lead to neurodegeneration. However, conclusions obtained from those studies were not consistent with each other as researchers may choose different experimental parameters, including administration ways, dosage, size, and crystal structure of TiO2 NPs. Therefore, in order to fully understand the potential risks of TiO2 NPs to brain health, figure out research areas where further studies are required, and improve its bio-safety for applications in the near future, how TiO2 NPs interact with the brain is investigated in this review by summarizing the current researches on neurotoxicity induced by TiO2 NPs.

Copper(i)oxide microparticles – synthesis and antimicrobial finishing of textiles

Copper(i)oxide microparticles were be bound to textile surfaces by means of a pigment binder system to provide antibacterial activity with good wash permanence, using rather simple processing and ordinary chemicals.

Preparation of different sized nano-silver loaded on functionalized graphene oxide with highly effective antibacterial properties

The synthesis of GO@PEG@AgNPs composites: step 1, synthesis of single-layer GO, step 2, the amidation reaction between carboxylic groups of GO and amine group of PEG to synthesize GO@PEG, step 3, GO@PEG in the presence the silver nitrate produces a GO@PEG@AgNPs composites.

Strontium delivery on topographical titanium to enhance bioactivity and osseointegration in osteoporotic rats

Strontium-substituted hierarchical Ti surface can enhance the osseointegration by both increasing new bone formation and reducing bone resorption under osteoporotic conditions.