Dasatinib and erianin co-loaded ion-responsive in-situ hydrogel for effective treatment of corneal neovascularization

Corneal neovasularization (CNV) is one of the leading causes for visual impairment. Dasatinib is a multi-target tyrosine kinase inhibitor, which can inhibit both platelet derived growth factor receptor and Src family kinases. Erianin exhibits excellent anti-inflammatory and anti-angiogenic effects. In this study, dasatinib and erianin were found to synergically inhibit the proliferation, migration and tube formation of Ea.hy926 cells, the three most important cellular processes of CNV. Next, dasatinib and erianin were co-encapsulated in nanostructured lipid carriers (dasa-eri-NLC), which increased the solubility of dasatinib by about 1790 times, increased the solubility of erianin by about 3 times. To improve its retention time on the ocular surface, dasa-eri-NLC was mixed with gellan gum (dasa-eri-NLC-gel), which achieved a sol-gel transformation when got in contact with tears. The dasa-eri-NLC-gel exhibited good rheological properties with shear thinning properties, extended the ocular residence time by more than 6 times, sustained the drug release, improved the corneal permeability of drug and exhibited good biocompatibility. Finally, the in vivo anti-CNV effect was evaluated in an alkaline burned mouse model of CNV, in which, the dasa-eri-NLC-gel significantly impeded the development and pathological changes of CNV, inhibited the expression of TNF-α, VEGF-A, HIF-1α, Src, pSrc in the cornea. In summary, dasa-eri-NLC-gel safely and efficiently delivered dasatinib and erianin to the cornea and exhibited significantly anti-CNV effect via inhibiting various angiogenesis related cytokines or factors. Dasa-eri-NLC-gel showed a great promise for the treatment of CNV and our study laid a solid foundation for future clinical transformation.

Mechanical and biological behavior of double network hydrogels reinforced with alginate versus gellan gum

Alginate and gellan gum have both been used by researchers as reinforcing networks to create tough and biocompatible polyethylene glycol (PEG) based double network (DN) hydrogels; however, the relative advantages and disadvantages of each approach are not understood. This study directly compares the mechanical and biological properties of polyethylene glycol di-methacrylate (PEGDMA) hybrid DN hydrogels reinforced with either gellan gum or sodium alginate using PEGDMA concentrations from 10 to 20 wt% and reinforcing network concentrations of 1 and 2 wt%. The findings demonstrate that gellan gum reinforcement is more effective at increasing the strength, stiffness, and toughness of PEGDMA DN hydrogels. In contrast, alginate reinforcement yields DN hydrogels with greater stretchability compared to gellan gum reinforced PEGDMA. Furthermore, separate measurements of toughness via unnotched work of rupture testing and notched fracture toughness testing showed a strong correlation of these two properties for a single reinforcing network type, but not across the two types of reinforcing networks. This suggests that additional notched fracture toughness experiments are important for understanding the full mechanical response when comparing different tough DN hydrogel systems. Regarding the biological response, after conjugation of matrix protein to the surface of both materials robust cell attachment and spreading was supported with higher yes associated protein (YAP) nuclear expression observed in populations adhering to the stiffer gellan gum-PEGDMA material. This study provides valuable insights regarding how to design double network hydrogels for specific property requirements, e.g., for use in biomedical devices, as scaffolding for tissue engineering, or in soft robotic applications.

3D printing of gellan-dextran methacrylate IPNs in glycerol and their bioadhesion by RGD derivatives

The ever-growing need for new tissue and organ replacement approaches paved the way for tissue engineering. Successful tissue regeneration requires an appropriate scaffold, which allows cell adhesion and provides mechanical support during tissue repair. In this light, an interpenetrating polymer network (IPN) system based on biocompatible polysaccharides, dextran (Dex) and gellan (Ge), was designed and proposed as a surface that facilitates cell adhesion in tissue engineering applications. The new matrix was developed in glycerol, an unconventional solvent, before the chemical functionalization of the polymer backbone, which provides the system with enhanced properties, such as increased stiffness and bioadhesiveness. Dex was modified introducing methacrylic groups, which are known to be sensitive to UV light. At the same time, Ge was functionalized with RGD moieties, known as promoters for cell adhesion. The printability of the systems was evaluated by exploiting the ability of glycerol to act as a co-initiator in the process, speeding up the kinetics of crosslinking. Following semi-IPNs formation, the solvent was removed by extensive solvent exchange with HEPES and CaCl2, leading to conversion into IPNs due to the ionic gelation of Ge chains. Mechanical properties were investigated and IPNs ability to promote osteoblasts adhesion was evaluated on thin-layer, 3D-printed disk films. Our results show a significant increase in adhesion on hydrogels decorated with RGD moieties, where osteoblasts adopted the spindle-shaped morphology typical of adherent mesenchymal cells. Our findings support the use of RGD-decorated Ge/Dex IPNs as new matrices able to support and facilitate cell adhesion in the perspective of bone tissue regeneration.

Effect of photobiomodulation on the behaviour of mesenchymal stem cells in three-dimensional cultures

Photobiomodulation (PBM) has been proposed as a strategy to improve the regenerative capacity of human adipose-derived stem cells (hASCs). Yet, this effect has been proved in 2D culture conditions. To analyze the effect of different doses of laser irradiation (660 nm) with different levels of energy (1 J, 2 J and 6 J) on hASCs cultured at 2D and 3D conditions. We used gellan gum spongy-like hydrogels as a biomaterial to 3D culture hASCs. Different doses (1-7 daily irradiations) and energy levels (1-6 J) of PBM were applied, and the metabolic activity, viability, proliferation, and release of ROS and IL-8 was evaluated up to 7 days. In 3D, cell proliferation increased at high energy (6 J) and after a single dose of irradiation, while in 2D, metabolic activity and proliferation was enhanced only after 3 doses and independently of the energy. More than 1 dose was needed to promote ROS secretion both in 2D and 3D culture conditions. Interestingly, a decrease of IL-8 secretion was detected only in 3D after 3-7 daily irradiations. Overall, hASCs response to PBM was not only dependent on the energy level and the number of applied stimuli, but also on the in vitro culture conditions.

The current state of the art in gellan-based printing inks in tissue engineering

With the advancement of enhanced fabrication technologies, specifically 3D printing, it is now possible to build artificial tissue for personalized healing. However, inks developed from polymers often fail to meet expectations in terms of mechanical strength, scaffold integrity, and the stimulation of tissue formation. Developing new printable formulations as well as adapting existing printing methods is an essential aspect of contemporary biofabrication research. In order to push the boundaries of the printability window, various strategies have been developed employing gellan gum. This has resulted in major breakthroughs in the development of 3D hydrogels scaffolds that exhibit significant resemblance to genuine tissues and enables the fabrication of more complex systems. In light of the many uses of gellan gum, the purpose of this paper is to provide a synopsis of the printable ink designs drawing attention to the various compositions and fabrication approaches that may be used for tuning the properties of 3D printed hydrogels for tissue engineering applications. The purpose of this article is to outline the development of gellan-based 3D printing inks and to encourage research by highlighting the possible applications of gellan gum.

Bioactivated gellan gum hydrogels affect cellular rearrangement and cell response in vascular co-culture and subcutaneous implant models

Hydrogels are suitable soft tissue mimics and capable of creating pre-vascularized tissues, that are useful for in vitro tissue engineering and in vivo regenerative medicine. The polysaccharide gellan gum (GG) offers an intriguing matrix material but requires bioactivation in order to support cell attachment and transfer of biomechanical cues. Here, four versatile modifications were investigated: Purified NaGG; avidin-modified NaGG combined with biotinylated fibronectin (NaGG-avd); oxidized GG (GGox) covalently modified with carbohydrazide-modified gelatin (gelaCDH) or adipic hydrazide-modified gelatin (gelaADH). All materials were subjected to rheological analysis to assess their viscoelastic properties, using a time sweep for gelation analysis, and subsequent amplitude sweep of the formed hydrogels. The sweeps show that NaGG and NaGG-avd are rather brittle, while gelatin-based hydrogels are more elastic. The degradation of preformed hydrogels in cell culture medium was analyzed with an amplitude sweep and show that gelatin-containing hydrogels degrade more dramatically. A co-culture of GFP-tagged HUVEC and hASC was performed to induce vascular network formation in 3D for up to 14 days. Immunofluorescence staining of the αSMA⁺ network showed increased cell response to gelatin-GG networks, while the NaGG-based hydrogels did not allow for the elongation of cells. Preformed, 3D hydrogels disks were implanted to subcutaneous rat skin pockets to evaluate biological in vivo response. As visible from the hematoxylin and eosin-stained tissue slices, all materials are biocompatible, however gelatin-GG hydrogels produced a stronger host response. This work indicates, that besides the biochemical cues added to the GG hydrogels, also their viscoelasticity greatly influences the biological response.

Optimized alginate-based 3D printed scaffolds as a model of patient derived breast cancer microenvironments in drug discovery

The cancer microenvironment influences tumor progression and metastasis and is pivotal to consider when designingin vivo-like cancer models. Current preclinical testing platforms for cancer drug development are mainly limited to 2D cell culture systems that poorly mimic physiological environments and traditional, low throughput animal models. The aim of this work was to produce a tunable testing platform based on 3D printed scaffolds (3DPS) with a simple geometry that, by extracellular components and response of breast cancer reporter cells, mimics patient-derived scaffolds (PDS) of breast cancer. Here, the biocompatible polysaccharide alginate was used as base material to generate scaffolds consisting of a 3D grid containing periostin and hydroxyapatite. Breast cancer cell lines (MCF7 and MDA-MB-231) produced similar phenotypes and gene expression levels of cancer stem cell, epithelial-mesenchymal transition, differentiation and proliferation markers when cultured on 3DPS and PDS, contrasting conventional 2D cultures. Importantly, cells cultured on 3DPS and PDS showed scaffold-specific responses to cytotoxic drugs (doxorubicin and 5-fluorouracil) that were different from 2D cultured cells. In conclusion, the data presented support the use of a tunable alginate-based 3DPS as a tumor model in breast cancer drug discovery.

Soft matter polysaccharide-based hydrogels as versatile bioengineered platforms for brain tissue repair and regeneration

Acute or chronic brain injuries promote deaths and the life-long debilitating neurological status where, despite advances in therapeutic strategies, clinical outcome hardly achieves total patient recovery. In recent decades, brain tissue engineering emerged as an encouraging area of research for helping in damaged central nervous system (CNS) recovery. Polysaccharides are abundant naturally occurring biomacromolecules with a great potential enhancement of advanced technologies in brain tissue repair and regeneration (BTRR). Besides carrying rich biological information, polysaccharides can interact and communicate with biomolecules, including glycosaminoglycans present in cell membranes and many signaling moieties, growth factors, chemokines, and axon guidance molecules. This review includes a comprehensive investigation of the current progress on designing and developing polysaccharide-based soft matter biomaterials for BTRR. Although few interesting reviews concerning BTRR have been reported, this is the first report specifically focusing on covering multiple polysaccharides and polysaccharide-based functionalized biomacromolecules in this emerging and intriguing field of multidisciplinary knowledge. This review aims to cover the state of art challenges and prospects of this fascinating field while presenting the richness of possibilities of using these natural biomacromolecules for advanced biomaterials in prospective neural tissue engineering applications.

Efficient Prevention of Marine Biofilm Formation Employing a Surface-Grafted Repellent Marine Peptide

Creation of surfaces resistant to the formation of microbial biofilms via biomimicry has been heralded as a promising strategy to protect a range of different materials ranging from boat hulls to medical devices and surgical instruments. In our current study, we describe the successful transfer of a highly effective natural marine biofilm inhibitor to the 2D surface format. A series of cyclic peptides inspired by the natural equinatoxin II protein produced by Beadlet anemone (Actinia equine) have been evaluated for their ability to inhibit the formation of a mixed marine microbial consortium on polyamide reverse osmosis membranes. In solution, the peptides are shown to effectively inhibit settlement and biofilm formation in a nontoxic manner down to 1 nM concentrations. In addition, our study also illustrates how the peptides can be applied to disperse already established biofilms. Attachment of a hydrophobic palmitic acid tail generates a peptide suited for strong noncovalent surface interactions and allows the generation of stable noncovalent coatings. These adsorbed peptides remain attached to the surface at significant shear stress and also remain active, effectively preventing the biofilm formation over 24 h. Finally, the covalent attachment of the peptides to an acrylate surface was also evaluated and the prepared coatings display a remarkable ability to prevent surface colonization at surface loadings of 55 ng/cm² over 48 h. The ability to retain the nontoxic antibiofilm activity, documented in solution, in the covalent 2D-format is unprecedented, and this natural peptide motif displays high potential in several material application areas.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

Dopamine-Functionalized Gellan Gum Hydrogel as a Candidate Biomaterial for a Retinal Pigment Epithelium Cell Delivery System

In this study, dopamine-functionalized gellan gum (DFG) hydrogel was prepared as a carrier for retinal pigment epithelium (RPE) cell delivery via a carbodiimide reaction. The carboxylic acid of gellan gum (GG) was replaced with catechol in a 21.3% yield, which was confirmed by NMR. Sol fraction and weight loss measurements revealed that dopamine improved degradability in the GG hydrogel. Measurements of the viscosity, injection force, and compressibility also showed that dopamine-functionalized GG hydrogels had more desirable rheological/mechanical properties for improving injectability. These characteristics were confirmed to arise from the GG's helix structure loosened by the dopamine's bulky nature. Moreover, dopamine's hydrophilic characteristics were confirmed to create a more favorable microenvironment for cell growth by promoting swelling capability and cell attachment. This improved biocompatibility became more pronounced when the hydrophilicity of dopamine was combined with a larger specific surface area stemming from the less porous structure of the dopamine-grafted hydrogels. This effect was apparent from the live/dead staining images of the as-prepared hydrogels. Meanwhile, the nonionic cross-linked DFG (DG) hydrogel showed the lowest protein expression in the immunofluorescence staining images obtained after 28 days of culture, supporting that it had the highest degradability and associated cell-releasing ability. That tendency was also observed in the gene expression data acquired by real-time polymerase chain reaction (RT-PCR) analysis. RT-PCR analysis also revealed that the DG hydrogel carrier could upregulate the visual function-related gene of RPE. Overall, the DG hydrogel system demonstrated its feasibility as a carrier of RPE cells and its potential as a means of improving visual function.

Electrospun regenerated Antheraea pernyi silk fibroin scaffolds with improved pore size, mechanical properties and cytocompatibility using mesh collectors

Generally, electrospun silk fibroin scaffolds collected by traditional plates present limited pore size and mechanical properties, which may restrict their biomedical applications. Herein, regenerated Antheraea pernyi silk fibroin (RASF) with excellent inherent cell adhesion property was chosen as a raw material and the conductive metal meshes were used as collectors to prepare modified RASF scaffolds by electrospinning from its aqueous solution. A traditional intact plate was used as a control. The morphology and mechanical properties of the obtained scaffolds were investigated. Schwann cells were further used to assess the cytocompatibility and cell migration ability of the typical scaffolds. Interestingly, compared with the traditional intact plate, the mesh collector with an appropriate gap size (circa 7 mm) could significantly improve the pore size, porosity and mechanical properties of the RASF scaffolds simultaneously. In addition, the scaffold collected under this condition (RASF-7mmG) showed higher cell viability, deeper cell permeation and faster cell migration of Schwann cells. Combined with the excellent inherent properties of ASF and the obviously enhanced scaffold cytocompatibility and mechanical properties, the RASF-7mmG scaffold is expected to be a candidate with great potential for biomedical applications.

Development of fluorescein isothiocyanate conjugated gellan gum for application of bioimaging for biomedical application

Herein, gellan gum (GG), a nature-derived polysaccharide, was applied to combine fluorescein isothiocyanate (FITC) to fabricate a bio-imaging material. The synthesis process of the FITC grafted GG (GG-F) and manufacturing method of GG-F scaffolds are presented. Chemical, physicochemical, and mechanical properties were characterized. In vitro study and in vivo study by implanting the GG-F scaffolds under the subcutaneous area of the nude mice were carried out to verify biocompatibility and safety of the material. The emission of the FITC was confirmed with high-resolution confocal laser scanning microscope (SR CLMS) and fluorescence in vivo imaging (FOBI). The results exhibited well-synthesized GG-F and the manufactured GG-F scaffolds showed similar property of GG scaffolds which confirms that the chemical modification does not affect the property of GG scaffolds. The in vitro and in vivo study exhibited biocompatibility of the GG-F material. Overall, the properly blended GG-F in GG did not influence the characteristics of the pristine GG except for the chemical property. Therefore, the GG-F can be applied for the future analysis in verifying the mechanism of GG characters and can be a promising candidate for bio-imaging.

Biopolymer Stabilization/Solidification of Soils: A Rapid, Micro-Macro, Cross-Disciplinary Approach

In this study, we describe a novel high throughput, micro-macro approach for the identification and efficient design of biopolymer stabilized soil systems. At the "microscopic" scale, we propose a rapid Membrane Enabled Bio-Mineral Affinity Screening (MEBAS) approach supported by Mineral Binding Characterization (MBC) (TGA, ATR-FTIR and ζ Potential), while at the "macroscopic" scale, micro scale results are confirmed by Geotechnical Verification (GV) through unconfined compression testing. We illustrate the methodology using an exemplar mine tailings Fe₂O₃-SiO₂ system. Five different biopolymers were tested against Fe₂O₃: locust bean gum, guar gum, gellan gum, xanthan gum, and sodium carboxymethyl cellulose. The screening revealed that locust bean gum and guar gum have the highest affinity for Fe₂O₃, which was confirmed by MBC and in agreement with GV. This affinity is attributed to the biopolymer's ability to form covalent C-O-Fe bonds through β-(1,4)-d-mannan groups. Upon their 1% addition to a "macroscopic" Fe₂O₃ based exemplar MT system, unconfined compressive strengths of 5171 and 3848 kPa were obtained, significantly higher than those for the other biopolymers and non-Fe systems. In the current study, MEBAS gave an approximately 50-fold increase in rate of assessment compared to GV alone. Application of the proposed MEBAS-MBC-GV approach to a broad range of soil/earthwork components and additives is discussed.

Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels

Three-dimensional (3D) bioprinting has recently advanced as an important tool to produce viable constructs that can be used for regenerative purposes or as tissue models. To develop biomimetic and sustainable 3D constructs, several important processing aspects need to be considered, among which crosslinking is most important for achieving desirable biomechanical stability of printed structures, which is reflected in subsequent behavior and use of these constructs. In this work, crosslinking methods used in 3D bioprinting studies are reviewed, parameters that affect bioink chemistry are discussed, and the potential toward improving crosslinking outcomes and construct performance is highlighted. Furthermore, current challenges and future prospects are discussed. Due to the direct connection between crosslinking methods and properties of 3D bioprinted structures, this Review can provide a basis for developing necessary modifications to the design and manufacturing process of advanced tissue-like constructs in future.

Modulating Alginate Hydrogels for Improved Biological Performance as Cellular 3D Microenvironments

The rational choice and design of biomaterials for biomedical applications is crucial for successful in vitro and in vivo strategies, ultimately dictating their performance and potential clinical applications. Alginate, a marine-derived polysaccharide obtained from seaweeds, is one of the most widely used polymers in the biomedical field, particularly to build three dimensional (3D) systems for in vitro culture and in vivo delivery of cells. Despite their biocompatibility, alginate hydrogels often require modifications to improve their biological activity, namely via inclusion of mammalian cell-interactive domains and fine-tuning of mechanical properties. These modifications enable the addition of new features for greater versatility and control over alginate-based systems, extending the plethora of applications and procedures where they can be used. Additionally, hybrid systems based on alginate combination with other components can also be explored to improve the mimicry of extracellular microenvironments and their dynamics. This review provides an overview on alginate properties and current clinical applications, along with different strategies that have been reported to improve alginate hydrogels performance as 3D matrices and 4D dynamic systems.

Application of Gellan Gum-Based Scaffold for Regenerative Medicine

Gellan gum (GG) is a linear microbial exopolysaccharide which is derived naturally by the fermentation process of Pseudomonas elodea. Application of GG in tissue engineering and regeneration medicine (TERM) is already over 10 years and has shown great potential. Although this biomaterial has many advantages such as biocompatibility, biodegradability, nontoxic in nature, and physical stability in the presence of cations, a variety of modification methods have been suggested due to some disadvantages such as mechanical properties, high gelation temperature, and lack of attachment sites. In this review, the application of GG-based scaffold for tissue engineering and approaches to improve GG properties are discussed. Furthermore, a recent trend and future perspective of GG-based scaffold are highlighted.

3D Bioprinting and Differentiation of Primary Skeletal Muscle Progenitor Cells

Volumetric loss of skeletal muscle can occur through sports injuries, surgical ablation, trauma, motor or industrial accident, and war-related injury. Likewise, massive and ultimately catastrophic muscle cell loss occurs over time with progressive degenerative muscle diseases, such as the muscular dystrophies. Repair of volumetric loss of skeletal muscle requires replacement of large volumes of tissue to restore function. Repair of larger lesions cannot be achieved by injection of stem cells or muscle progenitor cells into the lesion in absence of a supportive scaffold that (1) provides trophic support for the cells and the recipient tissue environment, (2) appropriate differentiational cues, and (3) structural geometry for defining critical organ/tissue components/niches necessary or a functional outcome. 3D bioprinting technologies offer the possibility of printing orientated 3D structures that support skeletal muscle regeneration with provision for appropriately compartmentalized components ranging across regenerative to functional niches. This chapter includes protocols that provide for the generation of robust skeletal muscle cell precursors and methods for their inclusion into methacrylated gelatin (GelMa) constructs using 3D bioprinting.

Biological Role of Gellan Gum in Improving Scaffold Drug Delivery, Cell Adhesion Properties for Tissue Engineering Applications

Over the past few decades, gellan gum (GG) has attracted substantial research interest in several fields including biomedical and clinical applications. The GG has highly versatile properties like easy bio-fabrication, tunable mechanical, cell adhesion, biocompatibility, biodegradability, drug delivery, and is easy to functionalize. These properties have put forth GG as a promising material in tissue engineering and regenerative medicine fields. Nevertheless, GG alone has poor mechanical strength, stability, and a high gelling temperature in physiological conditions. However, GG physiochemical properties can be enhanced by blending them with other polymers like chitosan, agar, sodium alginate, starch, cellulose, pullulan, polyvinyl chloride, xanthan gum, and other nanomaterials, like gold, silver, or composites. In this review article, we discuss the comprehensive overview and different strategies for the preparation of GG based biomaterial, hydrogels, and scaffolds for drug delivery, wound healing, antimicrobial activity, and cell adhesion. In addition, we have given special attention to tissue engineering applications of GG, which can be combined with another natural, synthetic polymers and nanoparticles, and other composites materials. Overall, this review article clearly presents a summary of the recent advances in research studies on GG for different biomedical applications.

Design of modular gellan gum hydrogel functionalized with avidin and biotinylated adhesive ligands for cell culture applications

This article proposes the coupling of the recombinant protein avidin to the polysaccharide gellan gum to create a modular hydrogel substrate for 3D cell culture and tissue engineering. Avidin is capable of binding biotin, and thus biotinylated compounds can be tethered to the polymer network to improve cell response. The avidin is successfully conjugated to gellan gum and remains functional as shown with fluorescence titration and electrophoresis (SDS-PAGE). Self-standing hydrogels were formed using bioamines and calcium chloride, yielding long-term stability and adequate stiffness for 3D cell culture, as confirmed with compression testing. Human fibroblasts were successfully cultured within the hydrogel treated with biotinylated RGD or biotinylated fibronectin. Moreover, human bone marrow stromal cells were cultured with hydrogel treated with biotinylated RGD over 3 weeks. We demonstrate a modular and inexpensive hydrogel scaffold for cell encapsulation that can be equipped with any desired biotinylated cell ligand to accommodate a wide range of cell types.

Mechanically Biomimetic Gelatin-Gellan Gum Hydrogels for 3D Culture of Beating Human Cardiomyocytes

To promote the transition of cell cultures from 2D to 3D, hydrogels are needed to biomimic the extracellular matrix (ECM). One potential material for this purpose is gellan gum (GG), a biocompatible and mechanically tunable hydrogel. However, GG alone does not provide attachment sites for cells to thrive in 3D. One option for biofunctionalization is the introduction of gelatin, a derivative of the abundant ECM protein collagen. Unfortunately, gelatin lacks cross-linking moieties, making the production of self-standing hydrogels difficult under physiological conditions. Here, we explore the functionalization of GG with gelatin at biologically relevant concentrations using semiorthogonal, cytocompatible, and facile chemistry based on hydrazone reaction. These hydrogels exhibit mechanical behavior, especially elasticity, which resembles the cardiac tissue. The use of optical projection tomography for 3D cell microscopy demonstrates good cytocompatibility and elongation of human fibroblasts (WI-38). In addition, human-induced pluripotent stem cell-derived cardiomyocytes attach to the hydrogels and recover their spontaneous beating in 24 h culture. Beating is studied using in-house-built phase contrast video analysis software, and it is comparable with the beating of control cardiomyocytes under regular culture conditions. These hydrogels provide a promising platform to transition cardiac tissue engineering and disease modeling from 2D to 3D.

Hydrogel-assisted neuroregeneration approaches towards brain injury therapy: A state-of-the-art review

Recent years have witnessed the development of an enormous variety of hydrogel-based systems for neuroregeneration. Formed from hydrophilic polymers and comprised of up to 90% of water, these three-dimensional networks are promising tools for brain tissue regeneration. They can assist structural and functional restoration of damaged tissues by providing mechanical support and navigating cell fate. Hydrogels also show the potential for brain injury therapy due to their broadly tunable physical, chemical, and biological properties. Hydrogel polymers, which have been extensively implemented in recent brain injury repair studies, include hyaluronic acid, collagen type I, alginate, chitosan, methylcellulose, Matrigel, fibrin, gellan gum, self-assembling peptides and proteins, poly(ethylene glycol), methacrylates, and methacrylamides. When viewed as tools for neuroregeneration, hydrogels can be divided into: (1) hydrogels suitable for brain injury therapy, (2) hydrogels that do not meet basic therapeutic requirements and (3) promising hydrogels which meet the criteria for further investigations. Our analysis shows that fibrin, collagen I and self-assembling peptide-based hydrogels display very attractive properties for neuroregeneration.

Three-Dimensional Printing and Cell Therapy for Wound Repair

Significance: Skin tissue damage is a major challenge and a burden on healthcare systems, from burns and other trauma to diabetes and vascular disease. Although the biological complexities are relatively well understood, appropriate repair mechanisms are scarce. Three-dimensional bioprinting is a layer-based approach to regenerative medicine, whereby cells and cell-based materials can be dispensed in fine spatial arrangements to mimic native tissue. Recent Advances: Various bioprinting techniques have been employed in wound repair-based skin tissue engineering, from laser-induced forward transfer to extrusion-based methods, and with the investigation of the benefits and shortcomings of each, with emphasis on biological compatibility and cell proliferation, migration, and vitality. Critical issues: Development of appropriate biological inks and the vascularization of newly developed tissues remain a challenge within the field of skin tissue engineering. Future Directions: Progress within bioprinting requires close interactions between material scientists, tissue engineers, and clinicians. Microvascularization, integration of multiple cell types, and skin appendages will be essential for creation of complex skin tissue constructs.

Tissue engineering with gellan gum

Engineering complex tissues for research and clinical applications relies on high-performance biomaterials that are amenable to biofabrication, maintain mechanical integrity, support specific cell behaviours, and, ultimately, biodegrade. In most cases, complex tissues will need to be fabricated from not one, but many biomaterials, which collectively fulfill these demanding requirements. Gellan gum is an anionic polysaccharide with potential to fill several key roles in engineered tissues, particularly after modification and blending. This review focuses on the present state of research into gellan gum, from its origins, purification and modification, through processing and biofabrication options, to its performance as a cell scaffold for both soft tissue and load bearing applications. Overall, we find gellan gum to be a highly versatile backbone material for tissue engineering research, upon which a broad array of form and functionality can be built.

αvβ3 and α5β1 integrin-specific ligands: From tumor angiogenesis inhibitors to vascularization promoters in regenerative medicine?

Integrins are cell adhesion receptors predominantly important during normal and tumor angiogenesis. A sequence present on several extracellular matrix proteins composed of Arg-Gly-Asp (RGD) has attracted attention due to its role in cell adhesion mediated by integrins. The development of ligands that can bind to integrins involved in tumor angiogenesis and brake disease progression has resulted in new investigational drug entities reaching the clinical trial phase in humans. The use of integrin-specific ligands can be useful for the vascularization of regenerative medicine constructs, which remains a major limitation for translation into clinical practice. In order to enhance vascularization, immobilization of integrin-specific RGD peptidomimetics within constructs is a recommended approach, due to their high specificity and selectivity towards certain desired integrins. This review endeavours to address the potential of peptidomimetic-coated biomaterials as vascular network promoters for regenerative medicine purposes. Clinical studies involving molecules tracking active integrins in cancer angiogenesis and reasons for their failure are also addressed.

Recent progress in gellan gum hydrogels provided by functionalization strategies

Gellan gum and its functionalized derivatives present a wide range of applications that open up new possibilities in tissue engineering and regenerative medicine.