An "off-on-enhanced on" electrochemiluminescence biosensor based on resonance energy transfer and surface plasmon coupled 3D DNA walker for ultra-sensitive detection of microRNA-21

In this study, a novel electrochemiluminescence (ECL) biosensor was developed to detect microRNA-21 (miRNA-21) with high sensitivity by leveraging the combined mechanisms of resonance energy transfer (RET) and surface plasmon coupling (SPC). Initially, the glassy carbon electrode (GCE) were coated with Cu-Zn-In-S quantum dots (CZIS QDs), known for their defect-related emission suitable for ECL sensing. Subsequently, a hairpin DNA H3 with gold nanoparticles (Au NPs) attached at the end was modified over the surface of the quantum dots. The Au NPs could effectively quench the ECL signals of CZIS QDs via RET. Further, a significant amount of report DNA was generated through the action of a 3D DNA walker. When the report DNA opened H3-Au NPs, the hairpin structure experienced a conformational change to a linear shape, increasing the gap between the CZIS QDs and the Au NPs. Consequently, the localized surface plasmon resonance ECL (LSPR-ECL) effect replaced ECL resonance energy transfer (ECL-RET). Moreover, the report DNA was released following the addition of H4-Au NPs, resulting in the formation of Au dimers and a surface plasma-coupled ECL (SPC-ECL) effect that enhanced the ECL intensity to 6.97-fold. The integration of new ECL-RET and SPC-ECL biosensor accurately quantified miRNA-21 concentrations from 10-8 M to 10-16 M with a limit of detection (LOD) of 0.08 fM, as well as successfully applied to validate human serum samples.

Versatile photoelectrochemical biosensor based on AIS/ZnS QDs sensitized-WSe2 nanoflowers coupled with DNA nanostructure probe for"On-Off"assays of TNF-α and MTase

Herein, a novel multifunctional photoelectrochemical (PEC) biosensor based on AgInS2 (AIS)/ZnS quantum dots (QDs) sensitized-WSe2 nanoflowers and DNA nanostructure signal probe was designed to achieve ultra-sensitive "On-Off" detection of human tumor necrosis factor α (TNF-α) and methylase Dam MTase (MTase). AIS/ZnS QDs as an excellent photosensitive material was found to match WSe2 in energy level for the first time, and the photocurrent signal after sensitization was 65 times that of WSe2 nanoflowers and 17.9 times that of AIS/ZnS QDs. Moreover, abundant AIS/ZnS QDs were loaded on the TiO2 nanoparticles with good conductivity by DNA to fabricate a multifunctional probe, which can not only amplify signal but also specifically recognize target. When target TNF-α was present, the AIS/ZnS QDs signal probe was attached to the WSe2 nanoflowers-modified electrode through binding to aptamer, and the amplified PEC signal was generated for "on" assay of TNF-α. Furthermore, Dam MTase as second target induced methylation of hairpin HDam, so it is cleaved by the endonuclease DpnI, resulting in the shedding of AIS/ZnS QDs signal probe for signal "off" detection of MTase. This work opened a new photosensitized probe and developed a promising PEC biosensor for dual-targets assay. By programming the DNA nanostructure, the biosensor can detect versatile targets in a simple and sensitive method, which has good practical application value in human serum.

DNAzyme-Mediated Biodeposition Coupling Adjustable Cascade Electric Fields for Photoelectrochemical Telomerase Activity Monitoring

Telomerase, as a specialized reverse transcriptase, plays a vital role in early cancer diagnostics and prognosis; thus, developing efficient sensing technologies is of vital importance. Herein, an innovative "signal-on-off" photoelectrochemical (PEC) sensing platform was developed for ultrasensitive evaluation of telomerase activity based on an electron-transfer tunneling distance regulation strategy and DNAzyme-triggerable biocatalytic precipitation. Concretely, cascade internal electric fields between CuInS2 quantum dots (QDs), graphitic carbon nitride nanosheets (g-C3N4 NSs), and TiO2 nanorod arrays (NRAs) were developed to realize cascade electron extraction and hole transfer. Enabled by such a design, an effective "signal-on" state to gain a progressively enhanced PEC output was designed by suppressing the photogenerated electron-hole pair recombination. With the introduction of hairpin probe H2 and the subsequent extension of the primer sequence driven by the target telomerase, the CuInS2 QDs labeled with hairpin probe H1 were programmatically unfolded, resulting in CuInS2 QDs' close proximity to the working electrode away from the cascade interface, accompanied by the formation of G-quadruplex/hemin complexes. The gradual undermining of tunneling distance and implantation of DNAzyme-initiating biocatalytic precipitation tremendously induced the sluggish migration kinetics of the photoinduced charge, accompanied by the photocurrent intensity decrement, leading to the "signal-off" state. Under optimized conditions, the as-prepared PEC biosensor realizes ultrasensitive detection of telomerase activity from 10 to 105 cell·mL-1 with a detection limitation of 3 cells·mL-1. As a proof of concept, this well-designed method provides new insights into signal amplification for telomerase activity evaluation and also presents promising potential for further development in drug screening, healthcare diagnostics, and biological assays.

Green synthesis of glyco-CuInS2 QDs with visible/NIR dual emission for 3D multicellular tumor spheroid and in vivo imaging

Glyco-quantum dots (glyco-QDs) have attracted significant interest in bioimaging applications, notably in cancer imaging, because they effectively combine the glycocluster effect with the exceptional optical properties of QDs. The key challenge now lies in how to eliminate the high heavy metal toxicity originating from traditional toxic Cd-based QDs for in vivo bioimaging. Herein, we report an eco-friendly pathway to prepare nontoxic Cd-free glyco-QDs in water by the "direct" reaction of thiol-ending monosaccharides with metal salts precursors. The formation of glyco-CuInS₂ QDs could be explained by a nucleation-growth mechanism following the LaMer model. As-prepared four glyco-CuInS₂ QDs were water-soluble, monodispersed, spherical in shape and exhibited size range of 3.0-4.0 nm. They exhibited well-separated dual emission in the visible region (500-590 nm) and near-infrared range (~ 827 nm), which may be attributable to visible excitonic emission and near-infrared surface defect emission. Meanwhile, the cell imaging displayed the reversibly distinct dual-color (green and red) fluorescence in tumor cells (HeLa, A549, MKN-45) and excellent membrane-targeting properties of glyco-CuInS₂ QDs based on their good biorecognition ability. Importantly, these QDs succeed in penetrating uniformly into the interior (the necrotic zone) of 3D multicellular tumor spheroids (MCTS) due to their high negative charge (zeta potential values ranging from - 23.9 to - 30.1 mV), which overcame the problem of poor penetration depth of existing QDs in in vitro spheroid models. So, confocal analysis confirmed their excellent ability to penetrate and label tumors. Thus, the successful application in in vivo bioimaging of these glyco-QDs verified that this design strategy is an effective, low cost and simple procedure for developing green nanoparticles as cheap and promising fluorescent bioprobes.

Self-powered photoelectrochemical aptasensor based on MIL-68(In) derived In2O3 hollow nanotubes and Ag doped ZnIn2S4 quantum dots for oxytetracycline detection

A self-powered photoelectrochemical (PEC) aptasensor was constructed based on MIL-68(In) derived indium oxide hollow nanotubes (In₂O₃ HNs) and Ag-doped ZnIn₂S₄ quantum dots (QDs) as sensing matrix for the ultrasensitive detection of oxytetracycline (OTC). The hollow tube structure of the designed photoelectric active platform provided abundant active sites and a larger specific surface area for the immobilization of target recognition unit. The coupling of Ag:ZnIn₂S₄ QDs and In₂O₃ HNs can accelerate the transmit and separation of photoinduced charge, and thus greatly increasing the intensity of photocurrent signal. Then, the well-constructed OTC-aptamer was anchored on the modified photoelectrode as an accurate capturing element, achieving the specific detection of analyte. Under optimal conditions, the photocurrent intensity of the PEC aptasensor decreases linearly, with a linear response range of 10^-4 -10 nmol/L, and a limit of detection (LOD) of 3.3 × 10^-5 nmol/L (S/N = 3). The developed self-powered aptasensor with excellent reproducibility, stability, and selectivity, provides a potential way to detect antibiotic residues in environmental media.

Luminescent copper indium sulfide (CIS) quantum dots for bioimaging applications

Copper indium sulfide (CIS) quantum dots are ideal for bioimaging applications, by being characterized by high molar absorption coefficients throughout the entire visible spectrum, high photoluminescence quantum yield, high tolerance to the presence of lattice defects, emission tunability from the red to the near-infrared spectral region by changing their dimensions and composition, and long lifetimes (hundreds of nanoseconds) enabling time-gated detection to increase signal-to-noise ratio. The present review collects: (i) the most common procedures used to synthesize stable CIS QDs and the possible strategies to enhance their colloidal stability in aqueous environment, a property needed for bioimaging applications; (ii) their photophysical properties and parameters that affect the energy and brightness of their photoluminescence; (iii) toxicity and bioimaging applications of CIS QDs, including tumor targeting, time-gated detection and multimodal imaging, as well as theranostics. Future perspectives are analyzed in view of advantages and potential limitations of CIS QDs compared to most traditional QDs.

Green Synthesis of Sodium Alginate Capped -CuInS2 Quantum Dots with Improved Fluorescence Properties

CuInS₂ (CIS) quantum dots (QDs) are known to be ideal fluorophores based on their low toxicity and tunable emission. However, due to low quantum yield (QY) and photostability, the surface is usually passivated by a higher bandgap shell (e.g. ZnS). This always resulted in a blue-shifted emission position which is not usually favourable for biological imaging. To address this problem, we herein report the passivation of green synthesized near infra-red emitting glutathione (GSH) capped CuInS₂ QDs using different concentration of sodium alginate (SA) at different temperatures. The as-synthesized QDs are small (~ 3.2 nm), highly crystalline and emitted in the near infra-red region. The optical results showed a 36% increase in photostability and a 2-fold increase in quantum yield at ratio 1:8 (SA: CIS) which is suitable for prolonged biological imaging applications. Transmission electron microscope and X-ray diffraction (XRD) analyses showed that the materials are highly crystalline without any change in shape and size after passivation with the biopolymer. Graphical Abstract.

Machado W, Wegner KD, Gontijo LAP, Bettini J, Schiavon MA, Reiss P, Aldakov D. Hydrothermal Synthesis of Aqueous-Soluble Copper Indium Sulfide Nanocrystals and Their Use in Quantum Dot Sensitized Solar Cells

A facile hydrothermal method to synthesize water-soluble copper indium sulfide (CIS) nanocrystals (NCs) at 150 °C is presented. The obtained samples exhibited three distinct photoluminescence peaks in the red, green and blue spectral regions, corresponding to three size fractions, which could be separated by means of size-selective precipitation. While the red and green emitting fractions consist of 4.5 and 2.5 nm CIS NCs, the blue fraction was identified as in situ formed carbon nanodots showing excitation wavelength dependent emission. When used as light absorbers in quantum dot sensitized solar cells, the individual green and red fractions yielded power conversion efficiencies of 2.9% and 2.6%, respectively. With the unfractionated samples, the efficiency values approaching 5% were obtained. This improvement was mainly due to a significantly enhanced photocurrent arising from complementary panchromatic absorption.

CuZn2InTe4 quantum dots-a novel nanostructure employing a green synthesis route

We report the synthesis and characterisation of novel CuZn2InTe4 quantum dots (QDs) suitable for various optoelectronic applications. The nanostructures grown are technologically important due to their Cd and Pb-free composition. The synthesis was maintained "green" by using a phosphine free organometallic procedure utilizing octadecene as the coordinating solvent. The structural properties of the nanocrystals (NCs) were analyzed using high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD). The composition was verified using X-ray photoelectron spectroscopy (XPS), inductive coupled plasma-optical emission spectroscopy (ICP-OES) and energy dispersive X-ray spectroscopy (EDX). The optical studies were performed using UV-VIS-NIR spectroscopy and photoluminescence (PL) spectroscopy and the band gap value obtained was verified using cyclic voltammetry (CV). The nanostructures grown were spherical with a size of about 5 nm possessing appreciable monodispersity.

Cytotoxicity, fluorescence tagging and gene-expression study of CuInS/ZnS QDS - meso (hydroxyphenyl) porphyrin conjugate against human monocytic leukemia cells

The toxicity of heavy metals present in binary semiconductor nanoparticles also known as quantum dots (QDs) has hindered their wide applications hence the advent of non-toxic ternary quantum dots. These new group of quantum dots have been shown to possess some therapeutic action against cancer cell lines but not significant enough to be referred to as an ideal therapeutic agent. In this report, we address this problem by conjugating red emitting CuInS/ZnS QDs to a 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin -photosensitizer for improved bioactivities. The glutathione capped CuInS/ZnS QDs were synthesized in an aqueous medium using a kitchen pressure cooker at different Cu: In ratios (1:4 and 1:8) and at varied temperatures (95 °C, 190 °C and 235 °C). Optical properties show that the as-synthesized CuInS/ZnS QDs become red-shifted compared to the core (CuInS) after passivation with emission in the red region while the cytotoxicity study revealed excellent cell viability against normal kidney fibroblasts (BHK21). The highly fluorescent, water-soluble QDs were conjugated to 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin (mTHPP) via esterification reactions at room temperature. The resultant water-soluble conjugate was then used for the cytotoxicity, fluorescent imaging and gene expression study against human monocytic leukemia cells (THP-1). Our result showed that the conjugate possessed high cytotoxicity against THP-1 cells with enhanced localized cell uptake compared to the bare QDs. In addition, the gene expression study revealed that the conjugate induced inflammation compared to the QDs as NFKB gene was over-expressed upon cell inflammation while the singlet oxygen (1O2) study showed the conjugate possessed large amount of 1O2, three times than the bare porphyrin. Thus, the as-synthesized conjugate looks promising as a therapeutic agent for cancer therapy.

Colloidal synthesis of tunably luminescent AgInS-based/ZnS core/shell quantum dots as biocompatible nano-probe for high-contrast fluorescence bioimaging

Tremendous demands for simultaneous imaging of biological entities, along with the drawback of photobleaching in fluorescent dyes, have encouraged scientists to apply novel and non-toxic colloidal quantum dots (QDs) in biomedical researches. Herein, a novel aqueous-phase approach for the preparation of multicomponent In-based QDs is reported. Absorption and photoluminescence emission spectra of the as-prepared QDs were tuned by alteration of QDs' composition as Zn-Ag-In-S/ZnS, Ag-In-S/ZnS and Cu-Ag-In-S/ZnS core/shell QDs. In order to reach reproducibly intense and tunable light-emissive colloidal QDs with green, amber, and red color, various optimization steps were carefully performed. The structural characterizations such as EDX, ICP-AES, XRD, TEM and FT-IR measurements were also carried out to demonstrate the success of the present method to prepare extremely quantum-confined QDs capped with functional groups. Then, to ensure their promising biomedical applications, the generated intracellular reactive oxygen species (ROS) by QDs were quantitatively and qualitatively measured in dark conditions and under 405 nm laser irradiation. Our results verified an enhancement in the generation of reactive oxygen species (ROS) and cytotoxic effects in the presence of laser irradiation while their muted toxic effects in dark conditions confirmed biocompatible properties of un-excited In-based QDs. Moreover, bioimaging analysis revealed strong merits of the suggested synthetic route to achieve ideal fluorescent QDs as bright/multi-color optical nano-probes in imaging and transporting pumps in the cell membrane. This further emphasized the potential ability of the present AgInS-based/ZnS QDs in obtaining required results as theranostic agents for simultaneous treatment and imaging of cancer. The harmonized advantages in simplicity and effectiveness of synthesis procedure, excellent structural/optical properties enriched with confirmed biomedical merits in high contrast imaging and potential treatment highlight the present work.

Influence of precursor ratio and dopant concentration on the structure and optical properties of Cu-doped ZnCdSe-alloyed quantum dots

Tunable copper doped Zn_1−xCd_xS alloy quantum dots (QDs) were successfully synthesized by the wet chemical method.

Facile, large scale synthesis of water soluble AgInSe2/ZnSe quantum dots and its cell viability assessment on different cell lines

I-III-VI chalcopyrite ternary quantum dots have emerged as a good alternative over the conventional II-VI and IV-VI chalcogenide binary QDs that usually consist of heavy metals such as Cd and Pb which has limited their bioapplications. Among the chalcopyrite QDs, AgInSe₂ QDs has been the least developed due to the imbalanced cation reactivity, unwanted impurities, broad size distribution and resultant large particle sizes. In addition, the cell viability of these QDs still needs to be investigated on different cell lines both normal and cancerous ones. Herein, large-scale synthesis of water-soluble thioglycolic acid (TGA) capped and gelatin-stabilized AgInSe₂ (AISe) core and AgInSe₂/ZnSe (AISe/ZnSe) core/shell QDs in the absence of an inert atmosphere and their cell viability against different cell lines are reported. The optical and structural characteristics of the as-synthesized QDs were investigated by UV-visible (vis) absorption, photoluminescence (PL) and Fourier-transmission infrared (FTIR) spectroscopies, dynamic light scattering (DLS), X-ray diffraction (XRD), and high-resolution transmission electron microscope (HRTEM) techniques. Growth of ZnSe shell on the core AISe resulted in the blue shifting of the emission maximum position with the increased PL intensity. The QDs are small and spherical in shape with an average particle diameter of 2.8 nm and 3.2 nm for AISe and AISe/ZnSe QDs respectively. The in vitro cell viability assay revealed that the as-synthesized AISe/ZnSe QDs are not toxic towards cancerous (HeLa -cervical cancer and A549-lung cancer) and normal (BHK21 -Kidney) cell lines.

Synthesis of far-red- and near-infrared-emitting Cu-doped InP/ZnS (core/shell) quantum dots with controlled doping steps and their surface functionalization for bioconjugation

In this study, we designed and synthesized far-red- and near-infrared-emitting Cu-doped InP-based quantum dots (QDs), and we also demonstrated their highly specific and sensitive biological imaging ability. Cu-doped InP/ZnS (core/shell) QDs were prepared using the hot colloidal synthesis method in the organic phase. The ZnS shell passivates the surface and improves the photoluminescence (PL) intensity. However, the InP : Cu/ZnS (core : dopants/shell) QDs, which were obtained after the Cu dopant was incorporated into bare InP QDs, followed by ZnS shell coating, had relatively low PL intensities (maximum PL quantum yield (QY) was only ∼16%) presumably due to the formation of defect sites in the InP-core QDs caused by dopant migration from the InP core to the ZnS shell. We prepared high-quality InP/ZnS : Cu/ZnS (core/shell : dopant/outer-shell) QDs, where thin ZnS shell layers were grown on bare InP QDs prior to Cu ion doping to prevent dopant migration and obtained PL QYs as high as 40%. The native hydrophobic ligands of the as-synthesized Cu-doped QDs were replaced with hydrophilic ligands including dihydrolipoic acid and a zwitterionic ligand, which rendered the QDs water-soluble. These QDs exhibited remarkable colloidal stabilities over a wide pH range, with hydrodynamic diameters less than 10 nm. Modified QD surfaces can also be used in conjugation with other functional moieties to apply highly specific and sensitive imaging probes with very low background levels. As a proof-of-concept study, we successfully demonstrated the selective imaging of streptavidin beads with biotin-conjugated QDs. These decorated Cu-doped InP/ZnS (core/shell) QDs are promising biological-probe candidates for imaging and assaying with reduced concerns regarding toxicity.

Recent advances on fluorescent biomarkers of near-infrared quantum dots for in vitro and in vivo imaging

Luminescence probe has been broadly used for bio-imaging applications. Among them, near-infrared (NIR) quantum dots (QDs) are more attractive due to minimal tissue absorbance and larger penetration depth. Above said reasons allowed whole animal imaging without slice scan or dissection. This review describes in vitro and in vivo imaging of NIR QDs in the regions of 650-900 nm (NIR-I) and 1000-1450 nm (NIR-II). Also, we summarize the recent progress in bio-imaging and discuss the future trends of NIR QDs including group II-VI, IV-VI, I-VI, I-III-VI, III-V, and IV semiconductors.

Room-Temperature Ionic-Liquid-Assisted Microwave Preparation of Tunable Photoluminescent Copper-Indium-Zinc-Sulfide Quantum Dots

A facile approach towards photoluminescent (PL) Cu-In-Zn-S quantum dots (CIZS QDs) has been developed, comprising microwave treatment with the assist of room-temperature ionic liquid (RTIL). Because of its high polarizability, RTIL served as a microwave absorbent, which resulted in the increase of the instantaneous nucleation rate and the rapid synthesis of CIZS QDs at low temperature. Moreover, the surface decoration of QDs with RTIL can passivate the surface defects greatly. The PL intensity of the CIZS QDs depends on the anion species, alkyl chain length of the RTIL, and the metal element ratios of the QDs. On the basis of the variable PL peak position and extended luminescence lifetime of the CIZS QDs, the superior emission behavior of the QDs was confirmed by surface etching with fluoride produced by the hydrolysis of RTIL 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄ ). Moreover, the intermediate alkyl chain length of the RTIL can avoid aggregation, which results in the construction of CIZS QDs with homogenous size distribution. The shape-controlled CIZS QDs show a broadened tunable emission peak from 677 to 579 nm compared with that of QDs prepared by a conventional one-pot method by mixing the raw materials. CIZS QDs also exhibit a high quantum yield (QY) of 24.1 % after coating with a ZnS shell. This method is expected to be a useful technique for the rapid synthesis of multiple QDs with a wider range of emission wavelengths and higher QY for a variety of applications.

Cd-free Cu-doped ZnInS/ZnS Core/Shell Nanocrystals: Controlled Synthesis And Photophysical Properties

Here, we report efficient composition-tunable Cu-doped ZnInS/ZnS (core and core/shell) colloidal nanocrystals (CNCs) synthesized by using a colloidal non-injection method. The initial precursors for the synthesis were used in oleate form rather than in powder form, resulting in a nearly defect-free photoluminescence (PL) emission. The change in Zn/In ratio tunes the percentage incorporation of Cu in CNCs. These highly monodisperse Cu-doped ZnInS CNCs having variable Zn/In ratios possess peak emission wavelength tunable from 550 to 650 nm in the visible spectrum. The quantum yield (QY) of these synthesized Cd-free CNCs increases from 6.0 to 65.0% after coating with a ZnS shell. The CNCs possessing emission from a mixed contribution of deep trap and dopant states to only dominant dopant-related Stokes-shifted emission are realized by a careful control of stoichiometric ratio of different reactant precursors during synthesis. The origin of this shift in emission was understood by using steady state and time-resolved fluorescence (TRF) spectroscopy studies. As a proof-of-concept demonstration, these blue excitable Cu-doped ZnInS/ZnS CNCs have been integrated with commercial blue LEDs to generate white-light emission (WLE). The suitable combination of these highly efficient doped CNCs results led to a Commission Internationale de l'Enclairage (CIE) color coordinates of (0.33, 0.31) at a color coordinate temperature (CCT) of 3694 K, with a luminous efficacy of optical radiation (LER) of 170 lm/Wopt and a color rendering index (CRI) of 88.

Photodoping and Transient Spectroscopies of Copper-Doped CdSe/CdS Nanocrystals

Colloidal Cu⁺-doped CdSe/CdS core/shell semiconductor nanocrystals (NCs) are investigated in their as-prepared and degenerately n-doped forms using time-resolved photoluminescence and transient-absorption spectroscopies. Photoluminescence from Cu⁺:CdSe/CdS NCs is dominated by recombination of delocalized conduction-band (CB) electrons with copper-localized holes. In addition to prominent bleaching of the first excitonic absorption feature, transient-absorption measurements show bleaching of the sub-bandgap copper-to-CB charge-transfer (ML_CBCT) absorption band and also reveal a photoinduced midgap valence-band (VB)-to-copper charge-transfer (L_VBMCT) absorption band that extends into the near-infrared, as predicted by recent computations. The photoluminescence of these NCs is substantially diminished upon introduction of excess CB electrons via photodoping. Time-resolved photoluminescence measurements reveal that the ML_CBCT excited state is still formed upon photoexcitation of the n-doped Cu⁺:CdSe/CdS NCs, but its luminescence is quenched by a fast (picosecond) three-carrier trap-assisted Auger recombination process involving two CB electrons and one copper-bound hole.

An efficient microwave-assisted hydrothermal synthesis of high-quality CuInZnS/ZnS quantum dots

In this study, we proposed a microwave-assisted hydrothermal method to synthesize novel CuInZnS/ZnS quantum dots (QDs).

Enzymatic biomineralization of biocompatible CuInS2, (CuInZn)S2 and CuInS2/ZnS core/shell nanocrystals for bioimaging

This work demonstrates a bioenabled fully aqueous phase and room temperature route to the synthesis of CuInS₂/ZnS core/shell quantum confined nanocrystals conjugated to IgG antibodies and used for fluorescent tagging of THP-1 leukemia cells. This elegant, straightforward and green approach avoids the use of solvents, high temperatures and the necessity to phase transfer the nanocrystals prior to application. Non-toxic CuInS₂, (CuInZn)S₂, and CuInS₂/ZnS core/shell quantum confined nanocrystals are synthesized via a biomineralization process based on a single recombinant cystathionine γ-lyase (CSE) enzyme. First, soluble In-S complexes are formed from indium acetate and H₂S generated by CSE, which are then stabilized by l-cysteine in solution. The subsequent addition of copper, or both copper and zinc, precursors then results in the immediate formation of CuInS₂ or (CuInZn)S₂ quantum dots. Shell growth is realized through subsequent introduction of Zn acetate to the preformed core nanocrystals. The size and optical properties of the nanocrystals are tuned by adjusting the indium precursor concentration and initial incubation period. CuInS₂/ZnS core/shell particles are conjugated to IgG antibodies using EDC/NHS cross-linkers and then applied in the bioimaging of THP-1 cells. Cytotoxicity tests confirm that CuInS₂/ZnS core/shell quantum dots do not cause cell death during bioimaging. Thus, this biomineralization enabled approach provides a facile, low temperature route for the fully aqueous synthesis of non-toxic CuInS₂/ZnS quantum dots, which are ideal for use in bioimaging applications.

Gram-Scale Synthesis of Hydrophilic PEI-Coated AgInS2 Quantum Dots and Its Application in Hydrogen Peroxide/Glucose Detection and Cell Imaging

Assisted with polyethylenimine, 4.0 L of water-soluble AgInS₂ quantum dots (AIS QDs) were successfully synthesized in an electric pressure cooker. As-prepared QDs exhibit yellow emission with a photoluminescence (PL) quantum yield up to 32%. The QDs also show excellent water/buffer stability. The highly luminescent AIS QDs are used to explore their dual-functional behavior: detection of hydrogen peroxide (H₂O₂)/glucose and cell imaging. The amino-functionalized AIS QDs show high sensitivity and specificity for H₂O₂ and glucose with detection limits of 0.42 and 0.90 μM, respectively. A linear correlation was established between PL intensity and concentration of H₂O₂ in the ranges of 0.5-10 μM and 10-300 μM, while the linear ranges were 1-10 μM and 10-1000 μM for detection of glucose. The AIS QDs reveal negligible cytotoxicity on HeLa cells. Furthermore, the luminescence of AIS QDs gives the function of optical imaging.

A novel CuZnInS quantum dot-based ECL sensing system for lysophosphatidic acid detection

A novel ECL sensing system was developed for lysophosphatidic acid detection based on AGM-CuInZnS QDs and GNs.

Facile Synthesis of Cadmium-Free Zn-In-S:Ag/ZnS Nanocrystals for Bio-Imaging

High quality cadmium-free Zn-In-S:Ag doped-nanocrystals (d-NCs) were synthesized via a simple one-step noninjection route using silver nitrate, indium acetate, zinc acetate, oleylamine, S powder and 1-dodecanethiol as starting materials in an organic phase. The size and optical properties can be effectively tailored by controlling the reaction time, reaction temperature, Ag(+) dopant concentration, and the molar ratio of In to Zn. The photoluminescence wavelength of as-prepared Zn-In-S:Ag NCs covered a broad visible range from 458 nm to 603 nm. After being passivated by protective ZnS shell, the photoluminescence quantum yield (PLQY) of Zn-In-S:Ag(+) /ZnS was greatly improved to 43.5%. More importantly, the initial high PLQY of the obtained core/shell d-NCs in organic media can be preserved when being transferred into the aqueous media via ligand exchange. Finally, high quality Zn-In-S:Ag(+) /ZnS d-NCs in aqueous phase were applied as bio-imaging agents for identifying living KB cells.

Optoelectronic Properties of CuInS2 Nanocrystals and Their Origin

The capacity of fluorescent colloidal semiconductor nanocrystals for commercial application has led to the development of nanocrystals with nontoxic constituent elements as replacements for the currently available Cd- and Pb-containing systems. CuInS2 is a good candidate material because of its direct band gap in the near-infrared spectral region and large optical absorption coefficient. The ternary nature, flexible stoichiometry, and different crystal structures of CuInS2 lead to a range of optoelectronic properties, which have been challenging to elucidate. In this Perspective, the optoelectronic properties of CuInS2 nanocrystals are described and what is known of their origin is discussed. We begin with an overview of their synthesis, structure, and mechanism of formation. A complete discussion of the tunable luminescence properties and the radiative decay mechanism of this system is then presented. Finally, progress toward application of these "green" nanocrystals is summarized.

Tumor cell-targeted Zn3In2S6 and Ag–Zn–In–S quantum dots for color adjustable luminophores

We report on the synthesis of water dispersible Zn₃In₂S₆ and Ag–Zn–In–S QDs and their relaxation dynamics.

Flexible Janus nanoribbons to help obtain simultaneous color-tunable enhanced photoluminescence, magnetism and electrical conduction trifunctionality

Upon the unique feature of the asymmetry dual-sided Janus structure, the strong luminescence of the luminescent–electrical–magnetic Janus nanoribbons can be achieved.

Photoluminescence properties of transition metal-doped Zn–In–S/ZnS core/shell quantum dots in solid films

The photoluminescence (PL) properties of transition metal ion (Mn²⁺ or Cu⁺) doped Zn–In–S/ZnS core/shell quantum dots (QDs) in solution and solid films were investigated by using steady-state and time-resolved PL spectra.

Photoluminescence Blinking and Reversible Electron Trapping in Copper-Doped CdSe Nanocrystals

Single-particle photoluminescence blinking is observed in the copper-centered deep-trap luminescence of copper-doped CdSe (Cu(+):CdSe) nanocrystals. Blinking dynamics for Cu(+):CdSe and undoped CdSe nanocrystals are analyzed to identify the effect of Cu(+), which selectively traps photogenerated holes. Analysis of the blinking data reveals that the Cu(+):CdSe and CdSe nanocrystal "off"-state dynamics are statistically identical, but the Cu(+):CdSe nanocrystal "on" state is shorter lived. Additionally, a new and pronounced temperature-dependent delayed luminescence is observed in the Cu(+):CdSe nanocrystals that persists long beyond the radiative lifetime of the luminescent excited state. This delayed luminescence is analogous to the well-known donor-acceptor pair luminescence of bulk copper-doped phosphors and is interpreted as revealing metastable charge-separated excited states formed by reversible electron trapping at the nanocrystal surfaces. A mechanistic link between this delayed luminescence and the luminescence blinking is proposed. Collectively, these data suggest that electron (rather than hole) trapping/detrapping is responsible for photoluminescence intermittency in these nanocrystals.

Visible-light-driven dye degradation using a floriated ZnIn2S4/AgIn5S8 heteromicrosphere catalyst

Here we report a new protocol for synthesizing ZnIn₂S₄/AgIn₅S₈ heteromicrospheres with an excellent photodegradation rate via partial cation exchange.

The composition effect on the optical properties of aqueous synthesized Cu–In–S and Zn–Cu–In–S quantum dot nanocrystals

The relationship between the optical properties and the compositional variation was investigated in aqueous synthesized Cu–In–S and Zn–Cu–In–S QDs.