A Dopamine Detection Sensor Based on Au-Decorated NiS2 and Its Medical Application

This article reports a simple hydrothermal method for synthesizing nickel disulfide (NiS2) on the surface of fluorine-doped tin oxide (FTO) glass, followed by the deposition of 5 nm Au nanoparticles on the electrode surface by physical vapor deposition. This process ensures the uniform distribution of Au nanoparticles on the NiS2 surface to enhance its conductivity. Finally, an Au@NiS2-FTO electrochemical biosensor is obtained for the detection of dopamine (DA). The composite material is characterized using transmission electron microscopy (TEM), UV-Vis spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical properties of the sensor are investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and time current curves in a 0.1 M PBS solution (pH = 7.3). In the detection of DA, Au@NiS2-FTO exhibits a wide linear detection range (0.1~1000 μM), low detection limit (1 nM), and fast response time (0.1 s). After the addition of interfering substances, such as glucose, L-ascorbic acid, uric acid, CaCl2, NaCl, and KCl, the electrode potential remains relatively unchanged, demonstrating its strong anti-interference capability. It also demonstrates strong sensitivity and reproducibility. The obtained Au@NiS2-FTO provides a simple and easy-to-operate example for constructing nanometer catalysts with enzyme-like properties. These results provide a promising method utilizing Au coating to enhance the conductivity of transition metal sulfides.

BSA nanoclusters-based sensor for detection of dopamine in schizophrenia from biofluids

OBJECTIVE

To develop nontoxic and stable fluorescent emission B-Cu nanoclusters (NCs) for the specific detection of dopamine at low concentrations in cerebrospinal fluid (CSF).

SIGNIFICANCE

Fluorescent gold and copper NCs conjugated with proteins, such as bovine serum albumin (BSA), offer photostability and healthcare potential. This study focused on fabricating B-Cu NCs that exhibited superior characteristics for sensitive dopamine detection.

METHODS

The study employed various instrumental techniques including attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), spectrofluorometry, and transmission electron microscopy (TEM) to characterize the formulated B-Cu NCs. The NCs were synthesized, resulting in particle size ∼300 nm. The highest observed fluorescence was recorded at 24542.81 relative fluorescence units (RFU).

RESULTS

The introduction of dopamine at concentrations of 0.1, 0.2, 0.3, and 0.4 ng/mL led to decreased fluorescence in both B-Au and B-Cu NCs due to an electron transport system. This reduction in fluorescence allowed dopamine concentration analysis in phosphate buffer and biological fluids such as blood plasma and CSF. B-Cu NCs showed potential as a biosensing system for point-of-care (POC) applications, specifically for diagnosing schizophrenia.

CONCLUSION

The study successfully synthesized stable and nontoxic B-Cu NCs with enhanced fluorescent emission properties. These NCs exhibited the capacity to detect dopamine at low concentrations in CSF. The study's findings hold promise for future applications, particularly in the development of a B-Cu NCs-based biosensing system for convenient POC detection of schizophrenia by both patients and clinicians. The potential impact of this technology on healthcare and biomedical fields is substantial.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Biosensing Dopamine and L-Epinephrine with Laccase (Trametes pubescens) Immobilized on a Gold Modified Electrode

Engineering electrode surfaces through the electrodeposition of gold may provide a range of advantages in the context of biosensor development, such as greatly enhanced surface area, improved conductivity and versatile functionalization. In this work we report on the development of an electrochemical biosensor for the laccase-catalyzed assay of two catecholamines—dopamine and L-epinephrine. Variety of electrochemical techniques—cyclic voltammetry, differential pulse voltammetry, electrochemical impedance spectroscopy and constant potential amperometry have been used in its characterization. It has been demonstrated that the laccase electrode is capable of sensing dopamine using two distinct techniques—differential pulse voltammetry and constant potential amperometry, the latter being suitable for the assay of L-epinephrine as well. The biosensor response to both catecholamines, examined by constant potential chronoamperometry over the potential range from 0.2 to −0.1 V (vs. Ag|AgCl, sat KCl) showed the highest electrode sensitivity at 0 and −0.1 V. The dependencies of the current density on either catecholamine’s concentration was found to follow the Michaelis—Menten kinetics with apparent constants K_M^app = 0.116 ± 0.015 mM for dopamine and K_M^app = 0.245 ± 0.031 mM for L-epinephrine and linear dynamic ranges spanning up to 0.10 mM and 0.20 mM, respectively. Calculated limits of detection for both analytes were found to be within the sub-micromolar concentration range. The biosensor applicability to the assay of dopamine concentration in a pharmaceutical product was demonstrated (with recovery rates between 99% and 106%, n = 3).

Advances in Electrochemical Techniques for the Detection and Analysis of Genetically Modified Organisms: An Analysis Based on Bibliometrics

Since the first successful transgenic plants obtained in 1983, dozens of plants have been tested. On the one hand, genetically modified plants solve the problems of agricultural production. However, due to exogenous genes of transgenic plants, such as its seeds or pollen drift, diffusion between populations will likely lead to superweeds or affect the original traits. The detection technology of transgenic plants and their products have received considerable attention. Electrochemical sensing technology is a fast, low-cost, and portable analysis technology. This review interprets the application of electrochemical technology in the analysis and detection of transgenic products through bibliometrics. A total of 83 research articles were analyzed, spanning 2001 to 2021. We described the different stages in the development history of the subject and the contributions of countries and institutions to the topic. Although there were more annual publications in some years, there was no explosive growth in any period. The lack of breakthroughs in this technology is a significant factor in the lack of experts from other fields cross-examining the subject. Through keyword co-occurrence analysis, different research directions on this topic were discussed. The use of nanomaterials with excellent electrical conductivity allows for more sensitive detection of GM crops by electrochemical sensors. Furthermore, co-citation analysis was used to interpret the most popular reports on the topic. In the end, we predict the future development of this topic according to the analysis results.

Rosaniline Hydrochloride Encapsulated MCM-48: Fluorescent and Electrochemical Sensor for Dopamine

The dye Rosaniline hydrochloride (RANH) has been successfully incorporated in MCM-48 (designated as RANH@MCM-48) and characterized by various spectroscopic methods including FT-IR, SEM, EDX and N₂ adsorption-desorption isotherm. RANH@MCM-48 in aqueous medium acts as fluorescence "on" sensor for neurotransmitter dopamine (DA) in presence of its main biological interfering agent ascorbic acid or vitamin c (AA) along with Glucose, Cholesterol and Uric acid (UA). The limits of detection (LOD) were found to be 65 nM and 51 nM respectively in absence and in presence of AA. The interaction of DA to RANH@MCM-48 is found to be reversible with respect to EDTA^2-. The fluorescence intensity vs. pH plot shows a narrow fluorescence window of 7.2 to 8.8. RANH@MCM-48 has been successfully applied for DA detection in artificial cerebrospinal fluid (ACF) and bovine serum albumin (BSA) with LOD values 27 nM and 22.5 nM respectively. Platinum disc electrode has been modified with RANH@MCM-48 which showed distinct oxidation peaks with a separation of 0.188 V in cyclic voltammetry (CV). The LOD for DA in presence of AA determined from oxidation current is 77.5 nM. The voltammetric detection of DA is found to be free from common interfering species Na⁺, K⁺, Ca²⁺, Fe²⁺, UA, Cholesterol and Glucose. RANH@MCM-48 has been found to be a very effective fluorescence and voltammetric sensor for DA with very low  LOD.

Advances in laccase-triggered anabolism for biotechnology applications

This is the first comprehensive overview of laccase-triggered anabolism from fundamental theory to biotechnology applications. Laccase is a typical biological oxidordeuctase that induces the one-electronic transfer of diverse substrates for engendering four phenoxy radicals with concomitant reduction of O₂ into 2H₂O. In vivo, laccase can participate in anabolic processes to create multifarious functional biopolymers such as fungal pigments, plant lignins, and insect cuticles, using mono/polyphenols and their derivatives as enzymatic substrates, and is thus conducive to biological tissue morphogenesis and global carbon storage. Exhilaratingly, fungal laccase has high redox potential (E° = 500-800 mV) and thermodynamic efficiency, making it a remarkable candidate for utilization as a versatile catalyst in the green and circular economy. This review elaborates the anabolic mechanisms of laccase in initiating the polymerization of natural phenolic compounds and their derivatives in vivo via radical-based self/cross-coupling. Information is also presented on laccase immobilization engineering that expands the practical application ranges of laccase in biotechnology by improving the enzymatic catalytic activity, stability, and reuse rate. Particularly, advances in biotechnology applications in vitro through fungal laccase-triggered macromolecular biosynthesis may provide a key research direction beneficial to the rational design of green chemistry.

Analytical performance of functional nanostructured biointerfaces for sensing phenolic compounds

Electrochemical biointerfaces are constructed with a wide range of nanomaterials and conducting polymers that strongly affect the analytical performance of biosensors. The analysis of progress toward electrochemical sensing platforms offers opportunities to provide devices for commercial use. The investigation of different methods for the synthesis of phenol biointerfaces leads to design challenges in the field of monitoring phenolic compounds. This paper review the innovative strategies and feature techniques in the construction of phenolic compound biosensors. The focus was made on the preparation methods of nanostructures and nanomaterials design for catalytic improvements of sensing interfaces. The paper also provides a comprehensive overview in the field of enzyme immobilization approaches at solid supports and technical formation of polymer nanocomposites, as well as applications of hybrid organic-inorganic nanocomposites in phenolic biosensors. This review also highlights the recent progress in the electrochemical detection of phenolic compounds and summarizes analytical performance parameters including sensitivity, storage stability, limit of detection, linear range, and Michaelis-Menten kinetic analysis. It also emphasizes advances from the past decade including technical challenges for the construction of suitable biointerfaces for monitoring phenolic compounds.

Polyphenol oxidase-based electrochemical biosensors: A review

The detection of phenolic compounds is relevant not only for their possible benefits to human health but also for their role as chemical pollutants, including as endocrine disruptors. The required monitoring of such compounds on-site or in field analysis can be performed with electrochemical biosensors made with polyphenol oxidases (PPO). In this review, we describe biosensors containing the oxidases tyrosinase and laccase, in addition to crude extracts and tissues from plants as enzyme sources. From the survey in the literature, we found that significant advances to obtain sensitive, robust biosensors arise from the synergy reached with a diversity of nanomaterials employed in the matrix. These nanomaterials are mostly metallic nanoparticles and carbon nanostructures, which offer a suitable environment to preserve the activity of the enzymes and enhance electron transport. Besides presenting a summary of contributions to electrochemical biosensors containing PPOs in the last five years, we discuss the trends and challenges to take these biosensors to the market, especially for biomedical applications.

Function integrated chitosan-based beads with throughout sorption sites and inherent diffusion network for efficient phosphate removal

A novel, cost-effective and biomass-derived adsorbent was fabricated by coating polydopamine on lanthanum-chitosan hydrogel (La-CS@PDA), which were endowed with a plentiful of amine groups. The diffusion structure of channel-network of La-CS@PDA made it well used in phosphate removal in wastewater treatment. The Langmuir isotherm delivered the maximal adsorption capacity about 195.3 mg/g, which was superior to most reported phosphate removal materials. More significantly, in the presence of competitive anions Cl^-, SO₄^2-, HCO₃^-, NO₃^-, F^- and HCrO₄^-, the resultant La-CS@PDA still conducted distinct selectivity for phosphate, which could be attributed to the selective binding sites of La species in the composite. Under continuous adsorption, the dynamic experimental data fitted well with Thomas model which imitates industrial practical application. By virtue of more fortes of high efficiency, ease of separation and expectable mechanical strength, as-prepared La-CS@PDA might be a promising candidate of dephosphorizing sorbent.

Functionalized gold nanoparticles for sample preparation: A review

Sample preparation is a crucial step for the reliable and accurate analysis of both small molecule and biopolymers which often involves processes such as isolation, pre-concentration, removal of interferences (purification), and pre-processing (e.g., enzymatic digestion) of targets from a complex matrix. Gold nanoparticle (GNP)-assisted sample preparation and pre-concentration has been extensively applied in many analytical procedures in recent years due to the favorable and unique properties of GNPs such as size-controlled synthesis, large surface-to-volume ratio, surface inertness, straightforward surface modification, easy separation requiring minimal manipulation of samples. This review article primarily focuses on applications of GNPs in sample preparation, in particular for bioaffinity capture and biocatalysis. In addition, their most common synthesis, surface modification and characterization methods are briefly summarized. Proper surface modification for GNPs designed in accordance to their target application directly influence their functionalities, e.g., extraction efficiencies, and catalytic efficiencies. Characterization of GNPs after synthesis and modification is worthwhile for monitoring and controlling the fabrication process to ensure proper quality and functionality. Parameters such as morphology, colloidal stability, and physical/chemical properties can be assessed by methods such as surface plasmon resonance, dynamic light scattering, ζ-potential determinations, transmission electron microscopy, Taylor dispersion analysis, and resonant mass measurement, among others. The accurate determination of the surface coverage appears to be also mandatory for the quality control of functionality of the nanoparticles. Some promising applications of (functionalized) GNPs for bioanalysis and sample preparation are described herein.

A conjugated carbon-dot–tyrosinase bioprobe for highly selective and sensitive detection of dopamine

A conjugated carbon-dot–tyrosinase bioprobe was first designed and applied for sensitive and selective dopamine detection in human serum.

Application of eukaryotic and prokaryotic laccases in biosensor and biofuel cells: recent advances and electrochemical aspects

Laccases exhibit a wide range of applications, especially in the electrochemical field, where they are regarded as a potential biotic component. Laccase-based biosensors have immense practical applications in the food, environmental, and medical fields. The application of laccases as biocathodes in enzymatic biofuel cells has promising potential in the preparation of implantable equipment. Extensive studies have been directed towards the potential role of fungal laccases as biotic components of electrochemical equipment. In contrast, the potential of prokaryotic laccases in electrochemistry has been not fully understood. However, there has been recent and rapid progress in the discovery and characterization of new types of prokaryotic laccases. In this review, we have comprehensively discussed the application of different sources of laccases as a biocatalytic component in various fields of application. Further, we described the potential of different types of laccases in bioelectrochemical applications.

Selective fluorescence quenching of papain-Au nanoclusters by self-polymerization of dopamine

In this paper, we synthesized a papain-stabilized fluorescent Au nanocluster (NC) probe and studied its interaction with dopamine. As fluorescence of papain-Au NCs is quenched in the presence of dopamine under alkaline conditions, we were able to establish a simple, selective analytical method for dopamine determination. By studying the fluorescence lifetime and dynamic light scattering of the NCs before and after interaction with dopamine, we found that this fluorescence quenching mechanism was possibly due to dopamine self-polymerization that produced polydopamine that cross-linked papain-Au NCs. Based on this new phenomenon, we proposed a highly selective analytical method for dopamine detection. Other small organic molecules, such as amino acids, ascorbic acid and uric acid did not interfere with dopamine detection. Dopamine in the range 20-100 μM can be linearly detected by the fluorescence quenching ratio of gold nanoclusters. Dopamine detection could be visually realized by watching color changes of papain-Au NCs under UV light or daylight, as both fluorescence and absorption of the papain-Au NCs changed during dopamine polymerization.

Simple strategy for sensitive detection of dopamine using CdTe QDs modified glassy carbon electrode

BACKGROUND

Cellular and brain metabolism of dopamine can be correlated with a number of neurodegenerative disorders, our study was to explore a simple and efficient method to detect dopamine in real samples.

METHODS

A new quantum dots (CdTe QDs) could be prepared using the hydrothermal method, the electrochemical biosensor was established by dropping CdTe QDs on the surface of glassy carbon electrode (GCE).

RESULTS

The CdTe QDs/GCE exhibited the excellent electrochemical catalytic activity toward dopamine (DA) with good stability and high sensitivity in presence of interfering substances. The detection limit of DA was calculated by differential pulse voltammetry (DPV) as low as 0.3 μmol L^-1 with a linear dynamic range of 1 μmol L^-1 to 400 μmol L^-1 .

CONCLUSION

In this paper, the proposed electrochemical biosensor could be effectively used for the direct and rapid detection of DA in human serum and urine samples.

One-Pot Green Synthesis of Graphene Nanosheets Encapsulated Gold Nanoparticles for Sensitive and Selective Detection of Dopamine

We report a simple new approach for green preparation of gallic acid supported reduced graphene oxide encapsulated gold nanoparticles (GA-RGO/AuNPs) via one-pot hydrothermal method. The as-prepared composites were successfully characterized by using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray powder diffraction techniques (XRD), scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM) and elemental analysis. The GA-RGO/AuNPs modified electrode behaves as a hybrid electrode material for sensitive and selective detection of dopamine (DA) in presence of ascorbic acid (AA) and uric acid (UA). The GA-RGO/AuNPs modified electrode displays an excellent electrocatalytic activity towards the oxidation of DA and exhibits a wide linear response range over the DA concentrations from 0.01-100.3 μM with a detection limit (LOD) of 2.6 nM based on S/N = 3. In addition, the proposed sensor could be applied for the determination of DA in human serum and urine samples for practical analysis.

Fluorescent Gold Nanoclusters for Selective Detection of Dopamine in Cerebrospinal fluid

Since the last two decades, protein conjugated fluorescent gold nanoclusters (NCs) owe much attention in the field of medical and nanobiotechnology due to their excellent photo stability characteristics. In this paper, we reported stable, nontoxic and red fluorescent emission BSA-Au NCs for selective detection of L-dopamine (DA) in cerebrospinal fluid (CSF). The evolution was probed by various instrumental techniques such as UV-vis spectroscopy, High resolution transmission electron microscopy (HTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), photoluminescence spectroscopy (PL). The synthesised BSA-Au NCs were showing 4–6 nm with high fluorescent ~8% Quantum yield (QY). The fluorescence intensity of BSA-Au NCs was quenched upon the addition of various concentrations of DA via an electron transfer mechanism. The decrease in BSA-Au NCs fluorescence intensity made it possible to determine DA in PBS buffer and the spiked DA in CSF in the linear range from 0 to 10 nM with the limit of detection (LOD) 0.622 and 0.830 nM respectively. Best of our knowledge, as-prepared BSA-Au NCs will gain possible strategy and good platform for biosensor, drug discovery, and rapid disease diagnosis such as Parkinson’s and Alzheimer diseases.

A highly selective and sensitive fluorescent nanosensor for dopamine based on formate bridged Tb(iii) complex and silver nanoparticles

The proposed fluorescent nanosensor can distinguish DA from EP.

Preparation of Pd/Bacterial Cellulose Hybrid Nanofibers for Dopamine Detection

Palladium nanoparticle-bacterial cellulose (PdBC) hybrid nanofibers were synthesized by in-situ chemical reduction method. The obtained PdBC nanofibers were characterized by a series of analytical techniques. The results revealed that Pd nanoparticles were evenly dispersed on the surfaces of BC nanofibers. Then, the as-prepared PdBC nanofibers were mixed with laccase (Lac) and Nafion to obtain mixture suspension, which was further modified on electrode surface to construct novel biosensing platform. Finally, the prepared electrochemical biosensor was employed to detect dopamine. The analysis result was satisfactory, the sensor showed excellent electrocatalysis towards dopamine with high sensitivity (38.4 µA·mM⁻¹), low detection limit (1.26 µM), and wide linear range (5–167 µM). Moreover, the biosensor also showed good repeatability, reproducibility, selectivity and stability and was successfully used in the detection of dopamine in human urine, thus providing a promising method for dopamine analysis in clinical application.