A biogenesis construction of CuO@MWCNT via Chenopodium album extract: an effective electrocatalyst for synaptic plasticity neurodegenerative drug pollutant detection

Clioquinol (CLQ) is one of the most toxic halogenated neurodegenerative drugs, and its synaptic plasticity effect directly affects human health and the environment. Cupric oxide (CuO) is an ideal electrocatalyst owing to its earth-abundance, non-toxic nature, and cost-effectiveness. Since phenolate oxygen and pyridine nitrogen in CLQ act as an electron donor and pave the way for detection with Cu2+ ions in the CuO. Designing the architecture of CuO with a multi-walled carbon nanotube (MWCNT) is a sensible strategy to improve the electrochemical activity of the developed sensor. Inspired by the bio-synthesis and green processing, we have demonstrated the in-situ synthesis of CuO nanosphere-decorated MWCNT by Chenopodium album leaf extract through a sonochemical approach and explored its electrochemical sensing performance toward CLQ. The physical comprehensive characterization of prepared nanocomposite was investigated by various microscopic and spectroscopic techniques. For comparison studies, the CuO nanosphere was prepared by the same preparation process without MWCNT. Based on the physical characterization outcomes, the morphological nature of CuO was observed to be a sphere-like structure, which was decorated on the MWCNT with an average crystallite size of 16 nm (± 1 nm). Based on the electrochemical studies, the fabricated nanocomposite exhibits a wider linear range of 0.025-1375 μM, with a minimum detection limit of 4.59 nM L-1 toward CLQ. The viability examination on the biological matrix obtained considerable spike recoveries.

Electrocatalytic oxidation and amperometric determination of sulfasalazine using bimetal oxide nanoparticles-decorated graphene oxide composite modified glassy carbon electrode at neutral pH

Cube-shaped samarium orthovanadate (SmVO₄) nanoparticles were interconnected with a graphene oxide sheet (GOS) using a simple and eco-friendly method to generate a SmVO₄@GOS nanocomposite. SmVO₄ was characterized using various spectroscopic and microscopic techniques, which confirmed the wrapping of GOS around the SmVO₄ nanoparticles. SmVO₄@GOS was then used to modify a glassy carbon electrode (GCE), which was evaluated for its electrochemical performance toward the assay of sulfasalazine (SSZ), an antibiotic drug. Cyclic voltammetry and amperometry were both used for the assay of SSZ using the SmVO₄@GOS-modified GCE at pH 7. The modified amperometric sensor is more sensitive, with a low detection limit (2.16 nM) and wide linear range of 20 nM-667 μM (Ag/AgCl). The electrochemical oxidation of SSZ was tested with blood serum and urine samples at physiological pH with recoveries in the range 96.1-98.6%. It indicates that the modified electrochemical sensor has good sensitivity and practical applicability toward SSZ detection. In the field of non-enzymatic sensors, SmVO₄@GOS/GCE provides a highly promising performance. Therefore, the electrochemical sensors have capacity for extensive analytical applications in biomedical devices.

Laser-scribed Graphene Electrodes Functionalized with Nafion/Fe3O4 Nanohybrids for the Ultrasensitive Detection of Neurotoxin Drug Clioquinol

The analysis of pharmaceutical active ingredients plays an important role in quality control and clinical trials because they have a significant physiological effect on the human body even at low concentrations. Herein, a flexible three-electrode system using laser-scribed graphene (LSG) technology, which consists of Nafion/Fe₃O₄ nanohybrids immobilized on LSG as the working electrode and LSG counter and reference electrodes on a single polyimide film, is presented. A Nafion/Fe₃O₄/LSG electrode is constructed by drop coating a solution of Nafion/Fe₃O₄, which is electrostatically self-assembled between positively charged Fe₃O₄ and negatively charged Nafion on the LSG electrode and is used for the first time to determine a neurotoxicity drug (clioquinol; CQL) in biological samples. Owing to their porous 3D structure, an enriched surface area at the active edges and polar groups (OH, COOH, and -SO₃H) in Nafion/Fe₃O₄/LSG electrodes resulted in excellent wettability to facilitate electrolyte diffusion, which gave ∼twofold enhancement in electrocatalytic activity over LSG electrodes. The experimental parameters affecting the analytical performance were investigated. The quantification of clioquinol on the Nafion/Fe₃O₄/LSG electrode surface was examined using differential pulse voltammetry and chronoamperometry techniques. The fabricated sensor displays preferable sensitivity (17.4 μA μM^-1 cm^-2), a wide linear range (1 nM to 100 μM), a very low detection limit (0.73 nM), and acceptable selectivity toward quantitative analysis of CQL. Furthermore, the reliability of the sensor was checked by CQL detection in spiked human blood serum and urine samples, and satisfactory recoveries were obtained.

Amplified Peroxidase-like Activity of Co2+ Using 8-Hydroxyquinoline and Its Application for Ultrasensitive Colorimetric Detection of Clioquinol

8-Hydroxyquinoline (8HQ) and its derivatives display diverse bioactivities and therapeutic potentials. In this study, we unveiled that 8HQ can boost the peroxidase-like activity of Co²⁺ in the presence of bicarbonate (HCO₃ ^- ) in neutral pH at room temperature. With 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonate) (ABTS) as the substrate, the formed Co²⁺ /8HQ/HCO₃ ^- complex shows robust catalytic activity with the turnover number (k_cat ) tens to hundreds of times higher than that of Co₃ O₄ and other Co²⁺ complexes in terms of per cobalt ion. This system was used to design colorimetric sensors for ultrasensitive detection of 8HQ-based drugs by activating the activity of Co²⁺ . Take detecting clioquinol as an example, a detection limit of 2.4 nM clioquinol with a linear range from 0.01 to 0.2 μM was obtained. This work not only revealed a new kind of ligand that activated the activity of Co²⁺ , but also provided a facile, low-cost, ultrasensitive, easy-to-use, and universal strategy for sensing various 8HQ-based drugs. Further development of this catalytic system might be beneficial to overcome drug resistance by combined medication.

Rare-Earth Eu3+/Gold Nanocluster Ensemble-Based Fluorescent Photoinduced Electron Transfer Sensor for Biomarker Dipicolinic Acid Detection

The use of metal ions to bridge the fluorescent materials to target analytes has been demonstrated to be a promising way to sensor design. Herein, the effect of rare-earth ions on the fluorescence of l-methionine-stabilized gold nanoclusters (Met-AuNCs) was investigated. It was found that europium (Eu³⁺) can significantly suppress the emission of Met-AuNCs, while other rare-earth ions showed a negligible impact. The mechanism on the observed fluorescence quenching of Met-AuNCs triggered by Eu³⁺ was systematically explored, with results revealing the dominant role of photoinduced electron transfer (PET). Eu³⁺ can bind to the surface of Met-AuNCs by the coordination effect and accepts the electron from the excited Met-AuNCs, which results in Met-AuNC fluorescence suppression. After introducing dipicolinic acid (DPA), an excellent biomarker for spore-forming pathogens, Eu³⁺ was removed from the surface of Met-AuNCs owing to the higher binding affinity between Eu³⁺ and DPA. Consequently, an immediate fluorescence recovery occurred when DPA was present in the system. Based on the Met-AuNC/Eu³⁺ ensemble, we then established a simple and sensitive fluorescence strategy for turn-on determination of biomarker DPA, with a linear range of 0.2-4 μM and a low limit of detection of 110 nM. The feasibility of the proposed method was further validated by the quantitative detection of DPA in the soil samples. We believe that this study would significantly facilitate the construction of metal-ion-mediated PET sensors for the measurement of various interested analytes by applying fluorescent AuNCs as detection probes.

A simple, quantitative method for spectroscopic detection of metformin using gold nanoclusters

We synthesized bovine serum albumin (BSA)-stabilized gold nanoclusters (BSA-GNCs) and confirmed their ultra-small size using HRTEM (High-resolution Transmission Electron Microscope) and DLS (Dynamic Light Scattering). The fluorescence intensity of BSA-GNCs is "turned off" in the presence of Cu(II) metal ions. The resulting Cu(II)-mediated BSA-GNCs were utilized to detect metformin, a drug used to control diabetes. Metformin binds to and displaces Cu(II) ions from the BSA on the surface of the nanoclusters, which turns on the fluorescence of the nanoclusters. The interactions between the protein-stabilized nanoclusters were investigated in the absence and presence of Cu(II) using circular dichroism (CD) and Fourier-transform infrared spectroscopy (FTIR). Cu(II)-quenched BSA-GNCs had an extremely high sensitivity to detect metformin, with a low limit of detection (LOD) of 0.068 μM and a dynamic range of limit of quantification (LOQ = 10/3 LOD) of 0.22 to 11 μM. The ability of this novel "turn-on" nanosensor to detect metformin in human serum and urine samples was confirmed: the percentage recovery in fluorescence for spiked analyte ranged from 96.00-98.50% and 92.60-96.62% in human serum and urine samples, respectively. Thus, BSA-GNCs provide a valid, sensitive, specific fluorometric methodology for the detection of metformin in biomedical applications.

Au25(SR)18: the captain of the great nanocluster ship

Noble metal nanoclusters are in the intermediate state between discrete atoms and plasmonic nanoparticles and are of significance due to their atomically accurate structures, intriguing properties, and great potential for applications in various fields. In addition, the size-dependent properties of nanoclusters construct a platform for thoroughly researching the structure (composition)-property correlations, which is favorable for obtaining novel nanomaterials with enhanced physicochemical properties. Thus far, more than 100 species of nanoclusters (mono-metallic Au or Ag nanoclusters, and bi- or tri-metallic alloy nanoclusters) with crystal structures have been reported. Among these nanoclusters, Au25(SR)18-the brightest molecular star in the nanocluster field-is capable of revealing the past developments and prospecting the future of the nanoclusters. Since being successfully synthesized (in 1998, with a 20-year history) and structurally determined (in 2008, with a 10-year history), Au25(SR)18 has stimulated the interest of chemists as well as material scientists, due to the early discovery, easy preparation, high stability, and easy functionalization and application of this molecular star. In this review, the preparation methods, crystal structures, physicochemical properties, and practical applications of Au25(SR)18 are summarized. The properties of Au25(SR)18 range from optics and chirality to magnetism and electrochemistry, and the property-oriented applications include catalysis, chemical imaging, sensing, biological labeling, biomedicine and beyond. Furthermore, the research progress on the Ag-based M25(SR)18 counterpart (i.e., Ag25(SR)18) is included in this review due to its homologous composition, construction and optical absorption to its gold-counterpart Au25(SR)18. Moreover, the alloying methods, metal-exchange sites and property alternations based on the templated Au25(SR)18 are highlighted. Finally, some perspectives and challenges for the future research of the Au25(SR)18 nanocluster are proposed (also holding true for all members in the nanocluster field). This review is directed toward the broader scientific community interested in the metal nanocluster field, and hopefully opens up new horizons for scientists studying nanomaterials. This review is based on the publications available up to March 2018.

Optical sensing at the nanobiointerface of metal ion-optically-active nanocrystals

Optically-active nanocrystals (such as quantum dots and plasmonic noble metal nanoparticles) have received great attention due to their size-tunable optical properties. The indicator displacement assay (IDA) with optically-active nanocrystals has become a common practice for optical sensor development, since no sophisticated surface functionalization of nanoparticles is required. Among the IDA-based optical sensors, the use of metal ions as receptors seems to be attractive. Therefore, in this review, the research progress of optical sensing at the nanobiointerface of metal ion-optically-active nanocrystals has been summarized. In particular, metal ion-mediated selective recognition has been summarized here based on the classical Hard-Soft-Acid-Base (HSAB) principle, which has been seldom mentioned before. Most of the references were therefore categorized according to their located place based on the HSAB theory. Besides, several metal ion modulation strategies that were not related to the HSAB theory (e.g., redox modulation) were also included. Finally, due to the cross-talk of metal ions in selective recognition, we have also summarized sensor array development based on multiple metal ion receptors in IDA sensing with optically-active nanocrystals. Several interesting applications of the IDA sensing with metal ions as receptors and optically-active nanocrystals as indicators are presented, with specific emphasis on the design principles and photophysical mechanisms of these probes.