State-of-the-art strategies for the colorimetric detection of heavy metals using gold nanorods based on aspect ratio reduction

A near-infrared plasmonic biosensor for detection of morphine and codeine in biological samples based on the end-to-end assembly of modified gold nanorods

The analytical determination of opiates in biological samples is a critical mission and remains a challenge for almost all judicial and clinical drug testing panels due to their high abuse potential. Based on the high sensitivity of the longitudinal surface plasmon resonance (LSPR) peak of gold nanorods (AuNRs), we successfully developed a novel and simple refractive index sensing platform for detection of morphine (MOR) and codeine (COD) by means of 2-amino-5-mercapto-1,3,4-thiadiazole functionalized gold nanorods (AMTD-AuNRs) in aqueous solution, which is, to the best of our knowledge, the first report on the assay of MOR and COD using AuNRs. AMTD molecules strongly anchor onto the tips of AuNRs via the mercapto group and subsequent hydrogen-bonding interactions between AMTD and the analytes induced end-to-end chain assembly of AuNRs and a consequent decrease of the LSPR absorption band at 850 nm along with a bathochromic shift and emergence of a new hybridized plasmon mode at 1050 nm which was characterized using a Vis-NIR spectrophotometer. After systematic optimization, the absorbance ratio (A1050/A850) was proportional to the concentration of MOR in the ranges of 0.08-5 μM and 0.2-8 μM for COD without any significant effect from possible interferents. Furthermore, detection limits of 40 and 62 nM were achieved for MOR and COD, respectively, which are much lower than the cut-off level of 2000 ng mL-1 for opiates in urine samples set by the Substance and Abuse Mental Health Services Administration (SAMHSA). Eventually, as proof-of-applicability, human urine and blood serum samples spiked with MOR and COD were analyzed and excellent recoveries ranging from 94.4 to 108.9% were obtained, demonstrating the successful applicability of the designed refractive index probe in real biological specimens.

Nanoanalysis of the leaching process simulation of Pb in agricultural soil

Using the Spectral characteristics of gold nanorods to investigate heavy metals Pb in agricultural soils. Studied included: (1) The effects of humic acid on Pb transformation and its formation changing were explored. The laboratory model was established to simulate Pb leaching process in the soil and investigated the change of total Pb content at different layers. (2) The migration and transformation of different forms Pb were studied by the nano system. The effect of humic acid and pH were analyzed based on the nano-analysis method. (3) The relationship between various forms Pb irons were analyzed. (4) The data showed that ion exchange state and iron-manganese oxidation state Pb were more likely to enriched at 0 cm depth, and organic bound state was more likely to enriched at 10 cm depth. Humic acid increased the solidify ability of different forms of Pb in agricultural soil, and the analysis system was efficient to supply the exactly transition process.

Thiol-mediated etching of gold nanorods as a neoteric strategy for room-temperature and multicolor detection of nitrite and nitrate

The excessive presence of nitrite and nitrate in environmental matrixes has raised concerns among the scientific communities due to their negative impacts on human health and living organisms. Considering the necessity of regular monitoring and rapid evaluation of nitrite and nitrate, it is of great interest to develop methods capable of on-site detection of these compounds. This study presents a non-aggregation colorimetric method based on etching gold nanorods (AuNRs) for visual detection of nitrite and nitrate. Instead of temperature, we propose using thiourea as a sulfur-containing compound to accelerate the rate of AuNR etching. Thiourea forms stable cationic species with Au⁺ ions and consequently speeds up the etching process by reducing the redox potential of Au⁺/Au. In the presence of thiourea, the AuNRs are etched by nitrite resulting in wide obvious color changes from brown to light brown, green, blue, purple, pink, and colorless. In addition to nitrite, the developed method is capable of nitrate determination by reducing nitrate to nitrite through acid-washed zinc powder and is the first report of colorful detection of nitrate. Under optimized conditions, a good linear relationship was found between nitrite/nitrate concentration and the colorimetric response in the range of 8.0 to 100 μmol L^-1 and 0.5 to 3.0 mmol L^-1 with a limit of detection (LOD) as low as 1.3 μmol L^-1 and 173.3 μmol L^-1 for nitrite and nitrate, respectively. Furthermore, the practical application of our developed probe was confirmed by accurate determination of nitrite and nitrate in various complex media including water samples, soil extracts, and food products such as salami and sausage.

Thiol-suppressed I2-etching of AuNRs: acetylcholinesterase-mediated colorimetric detection of organophosphorus pesticides

For the first time it is demonstrated that sulfhydryl compounds can suppress longitudinal etching of gold nanorods via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for detecting organophosphorus pesticides, which are most widely used in modern agriculture to improve food production but with high toxicity to animals and the ecological environment. Triazophos was selected as a model organophosphorus pesticide. In the absence of triazophos, the active acetylcholinesterase can catalyze the conversion of acetylthiocholine iodide to thiocholine whose thiol group can suppress the I₂-induced etching of gold nanorods. When triazophos is present, the activity of AchE is inhibited, and I₂-induced etching of gold nanorods results in triazophos concentration-dependent color change from brown to blue, pink, and red. The aspect ratio of gold nanorods reduced with gradually blue-shifted longitudinal absorption. There was a linear detection range from 0 to 117 nM (R² = 0.9908), the detection limit was 4.69 nM, and a good application potential was demonstrated by the assay of real water samples. This method will not only contribute to public monitoring of organophosphorus pesticides but also has verified a new signaling mechanism which will open up a new path to develop colorimetric detection methods. It has been first found that sulfhydryl compounds can suppress longitudinal etching of gold nanorods (AuNRs) via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for sensitively detecting organophosphorus pesticides (OPs). It will not only contribute to public monitoring of OPs but also has verified a new signaling mechanism which will open up a new path to develop multicolor colorimetric methods.

Recent advances in nanomaterial-enhanced enzyme-linked immunosorbent assays

This review highlights functional roles of nanomaterials for advancing conventional ELISA assays by serving as substrate-alternatives, enzyme-alternatives, or non-enzyme amplifiers.

Noble Metal Nanoparticle-Based Multicolor Immunoassays: An Approach toward Visual Quantification of the Analytes with the Naked Eye

Noble metal nanoparticle-based colorimetric sensors have become powerful tools for the detection of different targets with convenient readout. Among the many types of nanomaterials, noble metal nanoparticles exhibit extraordinary optical responses mainly due to their excellent localized surface plasmon resonance (LSPR) properties. The absorption spectrum of the noble metal nanoparticles was mostly in the visible range. This property enables the visual detection of various analytes with the naked eye. Among numerous color change modes, the way that different concentrations of targets represent vivid color changes has been brought to the forefront because the color distinction capability of normal human eyes is usually better than the intensity change capability. We review the state of the art in noble metal nanoparticle-based multicolor colorimetric strategies adopted for visual quantification by the naked eye. These multicolor strategies based on different means of morphology transformation are classified into two categories, namely, the etching of nanoparticles and the growth of nanoparticles. We highlight recent progress on the different means by which biocatalytic reactions mediated LSPR modulation signal generation and their applications in the construction of multicolor immunoassays. We also discuss the current challenges associated with multicolor colorimetric sensors during actual sample detection and propose the future development of next-generation multicolor qualification strategies.

The Roles of Nanomaterials in Conventional and Emerging Technologies for Heavy Metal Removal: A State-of-the-Art Review

Heavy metal (HM) pollution in waterways is a serious threat towards global water security, as high dosages of HM poisoning can significantly harm all living organisms. Researchers have developed promising methods to isolate, separate, or reduce these HMs from water bodies to overcome this. This includes techniques, such as adsorption, photocatalysis, and membrane removal. Nanomaterials play an integral role in all of these remediation techniques. Nanomaterials of different shapes have been atomically designed via various synthesis techniques, such as hydrothermal, wet chemical synthesis, and so on to develop unique nanomaterials with exceptional properties, including high surface area and porosity, modified surface charge, increment in active sites, enhanced photocatalytic efficiency, and improved HM removal selectivity. In this work, a comprehensive review on the role that nanomaterials play in removing HM from waterways. The unique characteristics of the nanomaterials, synthesis technique, and removal principles are presented. A detailed visualisation of HM removal performances and the mechanisms behind this improvement is also detailed. Finally, the future directions for the development of nanomaterials are highlighted.

A highly selective and reversible turn-off fluorescent chemosensor for Cu2+ based on electrospun nanofibrous membrane modified with pyrenecarboxaldehyde

A fluorescent nanofibrous membrane (NFM) was successfully fabricated by functionalizing electrospun ethylene-vinyl alcohol copolymer (EVOH) NFM with 4‑aminobenzoic acid (PABA) and 1‑pyrenecarboxaldehyde (Py-CHO) for fast and selective determination of Cu²⁺ in aqueous solution. The effective grafting of PABA and Py-CHO on the surface of EVOH NFM was confirmed by FTIR and XPS spectra. Benefiting from the integrated merits of electrospun EVOH NFM, PABA and Py-CHO, the as-appeared EVOH-PABA-Py NFM exhibited high sensitivity and selectivity towards Cu²⁺ detection. The quenching efficiency was 91.7% when the concentration of Cu²⁺ reached 5 × 10^-3 M, while the detectable fluorescence response of the NFM was still observed when the concentration of Cu²⁺ was 1 × 10^-9 M. The fluorescence quenching caused by Cu²⁺ was hardly affected by other commonly co-existent metal ions. More importantly, the fluorescent NFM exhibited fast response and high reversibility towards Cu²⁺ detection. The "off-on" fluorescence switching process via alternating addition of Cu²⁺ and Na₂EDTA occurred in 3 min, and the quenching efficiency of the NFM kept relatively stable values within 10 cycles. This work may provide a new insight into the development of rapid, portable, stable and reusable fluorescent sensor based on electrospun nanofibers that can satisfy the requirements of practical metal ions detection.

Fluorescent and Colorimetric Electrospun Nanofibers for Heavy-Metal Sensing

The accumulation of heavy metals in the human body and/or in the environment can be highly deleterious for mankind, and currently, considerable efforts have been made to develop reliable and sensitive techniques for their detection. Among the detection methods, chemical sensors appear as a promising technology, with emphasis on systems employing optically active nanofibers. Such nanofibers can be obtained by the electrospinning technique, and further functionalized with optically active chromophores such as dyes, conjugated polymers, carbon-based nanomaterials and nanoparticles, in order to produce fluorescent and colorimetric nanofibers. In this review we survey recent investigations reporting the use of optically active electrospun nanofibers in sensors aiming at the specific detection of heavy metals using colorimetry and fluorescence methods. The examples given in this review article provide sufficient evidence of the potential of optically electrospun nanofibers as a valid approach to fabricate highly selective and sensitive optical sensors for fast and low-cost detection of heavy metals.

Plasmon-Based Colorimetric Nanosensors for Ultrasensitive Molecular Diagnostics

Colorimetric detection of target analytes with high specificity and sensitivity is of fundamental importance to clinical and personalized point-of-care diagnostics. Because of their extraordinary optical properties, plasmonic nanomaterials have been introduced into colorimetric sensing systems, which provide significantly improved sensitivity in various biosensing applications. Here we review the recent progress on these plasmonic nanoparticles-based colorimetric nanosensors for ultrasensitive molecular diagnostics. According to their different colorimetric signal generation mechanisms, these plasmonic nanosensors are classified into two categories: (1) interparticle distance-dependent colorimetric assay based on target-induced forming cross-linking assembly/aggregate of plasmonic nanoparticles; and (2) size/morphology-dependent colorimetric assay by target-controlled growth/etching of the plasmonic nanoparticles. The sensing fundamentals and cutting-edge applications will be provided for each of them, particularly focusing on signal generation and/or amplification mechanisms that realize ultrasensitive molecular detection. Finally, we also discuss the challenge and give our future perspective in this emerging field.

Recent Advances of Electrospun Nanofibrous Membranes in the Development of Chemosensors for Heavy Metal Detection

It is critical to detect and analyze the heavy metal pollutions in environments and foods. Chemosensors have been widely investigated for fast detection of analytes such as heavy metals due to their unique advantages. In order to improve the detection sensitivity of chemosensors, recently electrospun nanofibrous membranes (ENMs) have been explored for the immobilization of chemosensors or receptors due to their high surface-to-volume ratio, high porosity, easiness of fabrication and functionalization, controllability of nanofiber properties, low cost, easy detection, no obvious pollution to the detection solution, and easy post-treatment after the detection process. The purpose of this review is to summarize and guide the development and application of ENMs in the field of chemosensors for the detection of analytes, especially heavy metals. First, heavy metals, chemosensors, and four types of preparation methods for ENM-immobilized chemosensors/receptors are briefly introduced. And then, ENM-immobilized chemosensors/receptors and their application progresses for optical, electro, and mass detections of heavy metals are reviewed according to the four types of preparation methods. Finally, the application of ENM-immobilized chemosensors/receptors is summarized and an outlook is provided. The review will provide an instruction to the research and development of ENM-immobilized chemosensors/receptors for the detection of analytes.

Plasmonic-ELISA: expanding horizons

Convergence of localized surface plasmon resonance of metal nanoparticles with classical ELISA has emerged as a new class of immunoassays, i.e. plasmonic ELISA, enabling biocatalysis mediated ultrasensitive naked-eye detection of disease biomarkers.