Sequence-Controlled Electrochemical Immobilization of Catalyst-Photosensitizer Oligomers for Tuning Photoelectrochemical Behaviors

Immobilizing catalysts and photosensitizers on an electrode surface is crucial in interfacial energy conversion. However, their combination for optimizing catalytic performance is an unpredictable challenge. Herein, we report that catalyst and photosensitizer monomers are selectively grafted one-by-one addition onto the electrode surface by interfacial electrosynthesis to achieve composition and sequence-controlled oligomer photoelectrocatalytic monolayers. This electrosynthesis relies on the oxidative coupling reaction of carbazole and the reductive coupling reaction of vinyl on the catalyst and photosensitizer monomers, and it initiates on self-assembled monolayers and propagates with alternating positive and negative potentials. Each addition and completion of the target monomer can be quantitatively identified and monitored by optical and electrical responses and their linear coefficients as a function of reaction steps. The resulting composition and sequence-controlled monolayers exhibit tuning electrocatalytic behaviors including water splitting and CO2 reduction, indicating an efficient way to optimize the electro- and photocatalytic functions and performance of molecular materials.

Effect of Anchoring Dynamics on Proton-Coupled Electron Transfer in the Ru(bda) Coordination Oligomer on a Graphitic Surface

The oligomeric ruthenium-based water oxidation catalyst, Ru(bda), is known to be experimentally anchored on graphitic surfaces through CH-π stacking interactions between the auxiliary bda ([2,2'-bipyridine]-6,6'-dicarboxylate) ligand bonded to ruthenium and the hexagonal rings of the surface. This anchoring provides control over their molecular coverage and enables efficient catalysis of water oxidation to dioxygen. The oligomeric nature of the molecule offers multiple anchoring sites at the surface, greatly enhancing the overall stability of the hybrid catalyst-graphitic surface anode through dynamic bonding. However, the impact of this dynamic anchoring on the overall catalytic mechanism is still a topic of debate. In this study, a crucial proton-coupled electron transfer event in the catalytic cycle is investigated using DFT-based molecular dynamics simulations plus metadynamics. The CH-π stacking anchoring plays a critical role not only in stabilizing this hybrid system but also in facilitating the proton-coupled electron transfer event with possible vibronic couplings between the anchoring bonds motion and charge fluctuations at the catalyst - graphitic surface interface. Furthermore, this computational investigation displays the presence of a quartet spin state intermediate that can lead to the experimentally observed and thermodynamically more stable doublet spin state.

Efficient Voltage-Driven Oxidation of Water and Alcohols by an Organic Molecular Catalyst Directly Attached to a Carbon Electrode

The integration of heterogeneous electrocatalysis and molecular catalysis is a promising approach to designing new catalysts for the oxygen evolution reaction (OER) and other processes. We recently showed that the electrostatic potential drop across the double layer contributes to the driving force for electron transfer between a dissolved reactant and a molecular catalyst immobilized directly on the electrode surface. Here, we report high current densities and low onset potentials for water oxidation attained using a metal-free voltage-assisted molecular catalyst (TEMPO). Scanning electrochemical microscopy (SECM) was used to analyze the products and determine faradic efficiencies for the generation of H₂O₂ and O₂. The same catalyst was employed for efficient oxidations of butanol, ethanol, glycerol, and H₂O₂. DFT calculations show that the applied voltage alters the electrostatic potential drop between TEMPO and the reactant as well as chemical bonding between them, thereby increasing the reaction rate. These results suggest a new route for designing next-generation hybrid molecular/electrocatalysts for OER and alcohol oxidations.

Structure-Activity Relationship for Di- up to Tetranuclear Macrocyclic Ruthenium Catalysts in Homogeneous Water Oxidation

Two di- and tetranuclear Ru(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylate) macrocyclic complexes were synthesized and their catalytic activities in chemical and photochemical water oxidation investigated in a comparative manner to our previously reported trinuclear congener. Our studies have shown that the catalytic activities of this homologous series of multinuclear Ru(bda) macrocycles in homogeneous water oxidation are dependent on their size, exhibiting highest efficiencies for the largest tetranuclear catalyst. The turnover frequencies (TOFs) have increased from di- to tetranuclear macrocycles not only per catalyst molecule but more importantly also per Ru unit with TOF of 6 s-1 to 8.7 s-1 and 10.5 s-1 in chemical and 0.6 s-1 to 3.3 s-1 and 5.8 s-1 in photochemical water oxidation per Ru unit, respectively. Thus, for the first time, a clear structure-activity relationship could be established for this novel class of macrocyclic water oxidation catalysts.

Carbazole modification of ruthenium bipyridine-dicarboxylate oxygen evolution molecular catalysts

We synthesized new oxygen-evolving molecular Ru(II) catalysts with one or two carbazole moieties on the axial pyridyl ligands, namely [Ru(bda)(cbz-py)(py)] and [Ru(bda)(cbz-py)₂] [C1 and C2; bdaH₂ = 2,2'-bipyridyl-6,6'-dicarboxylic acid, py = pyridine, and cbz-py = 9-(pyridin-4-yl)-9H-carbazole] to investigate the effect of cbz modification on the photophysical and catalytic properties of the well-known molecular catalyst [Ru(bda)(py)₂] (C0). The initial oxygen-evolving catalytic activities of C1 and C2 were higher than that of C0 in both a chemical reaction driven by the strong oxidant (NH₄)₂[Ce(NO₃)₆] (CAN = ceric ammonium nitrate) and photochemical oxidation using a [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine) photosensitizer with Na₂S₂O₈ as the sacrificial oxidant. The higher activities were ascribed to the electron-withdrawing cbz groups, which promoted the radical coupling reaction to form a Ru^IV-O-O-Ru^IV species. A unique oxygen-evolution rate change behaviour was observed for both C1 and C2 in the presence of a large excess of CAN, suggesting the competitive oxidation of the cbz moiety during the chemical oxygen evolution reaction. This work suggests that the cbz modification of an oxygen evolution molecular catalyst is a promising approach for integrating the hole accumulator near the oxygen evolution catalytic centre.

Supramolecular photocatalysts fixed on the inside of the polypyrrole layer in dye sensitized molecular photocathodes: application to photocatalytic CO2 reduction coupled with water oxidation

The development of systems for photocatalytic CO2 reduction with water as a reductant and solar light as an energy source is one of the most important milestones on the way to artificial photosynthesis. Although such reduction can be performed using dye-sensitized molecular photocathodes comprising metal complexes as redox photosensitizers and catalyst units fixed on a p-type semiconductor electrode, the performance of the corresponding photoelectrochemical cells remains low, e.g., their highest incident photon-to-current conversion efficiency (IPCE) equals 1.2%. Herein, we report a novel dye-sensitized molecular photocathode for photocatalytic CO2 reduction in water featuring a polypyrrole layer, [Ru(diimine)3]2+ as a redox photosensitizer unit, and Ru(diimine)(CO)2Cl2 as the catalyst unit and reveal that the incorporation of the polypyrrole network significantly improves reactivity and durability relative to those of previously reported dye-sensitized molecular photocathodes. The irradiation of the novel photocathode with visible light under low applied bias stably induces the photocatalytic reduction of CO2 to CO and HCOOH with high faradaic efficiency and selectivity (even in aqueous solution), and the highest IPCE is determined as 4.7%. The novel photocathode is coupled with n-type semiconductor photoanodes (CoO x /BiVO4 and RhO x /TaON) to construct full cells that photocatalytically reduce CO2 using water as the reductant upon visible light irradiation as the only energy input at zero bias. The artificial Z-scheme photoelectrochemical cell with the dye-sensitized molecular photocathode achieves the highest energy conversion efficiency of 8.3 × 10-2% under the irradiation of both electrodes with visible light, while a solar to chemical conversion efficiency of 4.2 × 10-2% is achieved for a tandem-type cell using a solar light simulator (AM 1.5, 100 mW cm-2).

Surface-Promoted Evolution of Ru-bda Coordination Oligomers Boosts the Efficiency of Water Oxidation Molecular Anodes

A new Ru oligomer of formula {[Ru^II(bda-κ-N²O²)(4,4'-bpy)]₁₀(4,4'-bpy)}, 10 (bda is [2,2'-bipyridine]-6,6'-dicarboxylate and 4,4'-bpy is 4,4'-bipyridine), was synthesized and thoroughly characterized with spectroscopic, X-ray, and electrochemical techniques. This oligomer exhibits strong affinity for graphitic materials through CH-π interactions and thus easily anchors on multiwalled carbon nanotubes (CNT), generating the molecular hybrid material 10@CNT. The latter acts as a water oxidation catalyst and converts to a new species, 10'(H₂O)₂@CNT, during the electrochemical oxygen evolution process involving solvation and ligand reorganization facilitated by the interactions of molecular Ru catalyst and the surface. This heterogeneous system has been shown to be a powerful and robust molecular hybrid anode for electrocatalytic water oxidation into molecular oxygen, achieving current densities in the range of 200 mA/cm² at pH 7 under an applied potential of 1.45 V vs NHE. The remarkable long-term stability of this hybrid material during turnover is rationalized based on the supramolecular interaction of the catalyst with the graphitic surface.

Electrochemical Polymerization Provides a Function-Integrated System for Water Oxidation

Water oxidation is a key reaction in natural and artificial photosynthesis. In nature, the reaction is efficiently catalyzed by a metal-complex-based catalyst surrounded by hole-transporting amino acid residues. However, in artificial systems, there is no example of a water oxidation system that has a catalytic center surrounded by hole transporters. Herein, we present a facile strategy to integrate catalytic centers and hole transporters in one system. Electrochemical polymerization of a metal-complex-based precursor afforded a polymer-based material (Poly-1). Poly-1 exhibited excellent hole-transporting ability and catalyzed water oxidation with high performance. It was also revealed that the catalytic activity was almost completely suppressed in the absence of the hole-transporting moieties. The present study provides a novel strategy for constructing efficient molecule-based systems for water oxidation.

A Ru diphosphonato complex with a metal-metal bond for water oxidation

Unlike [Ru2(μ-O2CCH3)4], the structurally analogous water-soluble RuII,III2 diphosphonato complex K3[Ru2(hedp)2(H2O)2] (K3·1) is only involved in stoichiometric water oxidation with a maximum 67% O2 yield under CAN/HNO3 solution (pH 1.0) for 2.5 h. The water oxidation mechanism and intermediate products were ascertained by UV-vis, ESI-MS and DFT calculation.

Homogeneous Catalysts Based on First-Row Transition-Metals for Electrochemical Water Oxidation

Strategies that enable the renewable production of storable fuels (i. e. hydrogen or hydrocarbons) through electrocatalysis continue to generate interest in the scientific community. Of central importance to this pursuit is obtaining the requisite chemical (H+ ) and electronic (e- ) inputs for fuel-forming reduction reactions, which can be met sustainably by water oxidation catalysis. Further possibility exists to couple these redox transformations to renewable energy sources (i. e. solar), thus creating a carbon neutral solution for long-term energy storage. Nature uses a Mn-Ca cluster for water oxidation catalysis via multiple proton-coupled electron-transfers (PCETs) with a photogenerated bias to perform this process with TOF 100∼300 s-1 . Synthetic molecular catalysts that efficiently perform this conversion commonly utilize rare metals (e. g., Ru, Ir), whose low abundance are associated to higher costs and scalability limitations. Inspired by nature's use of 1st row transition metal (TM) complexes for water oxidation catalysts (WOCs), attempts to use these abundant metals have been intensively explored but met with limited success. The smaller atomic size of 1st row TM ions lowers its ability to accommodate the oxidative equivalents required in the 4e- /4H+ water oxidation catalysis process, unlike noble metal catalysts that perform single-site electrocatalysis at lower overpotentials (η). Overcoming the limitations of 1st row TMs requires developing molecular catalysts that exploit biomimetic phenomena - multiple-metal redox-cooperativity, PCET and second-sphere interactions - to lower the overpotential, preorganize substrates and maintain stability. Thus, the ultimate goal of developing efficient, robust and scalable WOCs remains a challenge. This Review provides a summary of previous research works highlighting 1st row TM-based homogeneous WOCs, catalytic mechanisms, followed by strategies for catalytic activity improvements, before closing with a future outlook for this field.

Characterizing photocatalysts for water splitting: from atoms to bulk and from slow to ultrafast processes

This review provides a comprehensive overview on characterisation techniques for light-driven redox-catalysts highlighting spectroscopic, microscopic, electrochemical and spectroelectrochemical approaches.

Linear correlation models for the redox potential of organic molecules in aqueous solutions

In this study, we use the molecular orbital energy approximation (MOEA) and the energy difference approximation (EDA) to build linear correlation models for the redox potentials of 53 organic compounds in aqueous solutions. The molecules evaluated include nitroxides, phenols, and amines. Both the MOEA and EDA methods yield similar correlation models, however, the MOEA method is less computationally expensive. Correlation coefficients (R²) below 0.3 and mean absolute errors above 0.25 V were found for correlation models built without solvent effects. When explicit water molecules and a continuum solvent model are added to the calculations, correlation coefficients close to 0.8 are reached, and mean absolute errors below 0.18 V are obtained. The incorporation of solvent effects is necessary for good correlation models, particularly for redox processes of charged molecules in aqueous solutions. A comparison of the correlation models from different methodologies is provided. Graphical abstract.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO₂ reduction and N₂ fixation reactions.

Role of water oxidation in the photoreduction of graphene oxide

By means of a H₂¹⁸O labeling experiment in combination with mass spectrometry tracking, we studied GO photoreduction.

Formal water oxidation turnover frequencies from MIL-101(Cr) anchored Ru(bda) depend on oxidant concentration

[Ru(bda)(L)₂] incorporated into the MIL-101(Cr) metal–organic framework catalyzes water oxidation faster than a homogenous reference, with the number of active catalysts depending on oxidant concentration.

The molecular water oxidation catalyst [Ru(bda)(L)₂] has been incorporated into pyridine-decorated MIL-101(Cr) metal–organic frameworks. The resulting MIL-101@Ru materials exhibit turnover frequencies (TOFs) up to ten times higher compared to the homogenous reference. An unusual dependence of the formal TOFs on oxidant concentration is observed that ultimately arises from differing amounts of catalysts in the MOF crystals being active.

Flavin-sensitized electrode system for oxygen evolution using photo-electrocatalysis

Fabrication of bio-electrode systems decorated with redox active biomolecules, flavins, is demonstrated. Exploiting the photochemistry and electrochemistry of flavins, we explored the photo-electrochemical activity of flavin-functionalized electrode systems to assess their potential utility for sustainable energy production. As model systems, lumiflavin and flavin adenine dinucleotide were immobilized on carbon electrodes by dropcasting and covalent grafting techniques. Activity of these bio-electrodes towards generation of O2 from H2O in 0.5 M potassium phosphate buffer at pH 7.1 was demonstrated. Irradiation of the electrode system with visible light led to increased activity of the electrodes with a 3-fold enhancement of oxidation of H2O.

Surface Immobilization of Molecular Electrocatalysts for Energy Conversion

Electrocatalysts are critically important for a secure energy future, as they facilitate the conversion between electrical and chemical energy. Molecular catalysts offer precise control of structure that enables understanding of structure-reactivity relationships, which can be difficult to achieve with heterogeneous catalysts. Molecular electrocatalysts can be immobilized on surfaces by covalent bonds or through non-covalent interactions. Advantages of surface immobilization include the need for less catalyst, avoidance of bimolecular decomposition pathways, and easier determination of catalyst lifetime. This Minireview highlights surface immobilization of molecular electrocatalysts for reduction of O₂ , oxidation of H₂ O, production of H₂ , and reduction of CO₂ .

A pyrene-modified cobalt salophen complex immobilized on multiwalled carbon nanotubes acting as a precursor for efficient electrocatalytic water oxidation

Highly efficient electrocatalytic water oxidation with an immobilized pyrene-modified cobalt salophen complex: molecular catalysis or heterogeneous catalysis?

Nonaqueous electrocatalytic water oxidation by a surface-bound Ru(bda)(L)2 complex

Electrocatalytic water oxidation by a heterogeneous Ru(bda) catalyst is enhanced in a non-aqueous environment relative to water as the solvent.

An efficient and inexpensive water-oxidizing manganese-based oxide electrode

A cheap and very simple method to synthesize an efficient water-oxidizing manganese-based oxide coated fluorine doped tin oxide electrode was reported.