Enhancing photocatalytic destruction of lignin via cellulose derived carbon quantum dots/g-C3N4 heterojunctions

Lignocellulosic biomass exhibits a promising potential for production of carbon materials. Nitrogen and phosphorus co-doped carbon quantum dots (N,P-CQDs) were fabricated via (NH4)2HPO4 assisted hydrothermal treatment of cellulose pulp fibers. The as-prepared N,P-CQDs were characterized by HRTEM, FTIR, fluorescence and UV-vis, and then incorporated into g-C3N4 (CN) through sonication and liquid deposition, forming N,P-CQDs/sonication treated g-C3N4 (C-SCN) composites, which were then explored as photocatalysts. The photocatalytic ability of C-SCN towards model lignin was further analyzed. The results showed that, the fluorescence intensity and photoluminescence performance of N,P-CQDs were much higher than that of CQDs; the heterojunction was successfully constructed between the composites of N,P-CQDs and SCN; the incorporation of N,P-CQDs enhanced the visible light absorption, but reduced the band gap of the composite heterojunction; the resultant photocatalysts exhibited a good photocatalytic ability of model lignin via catalyze the fracture of β-O-4' ether bond and CC bond, i.e., the photocatalytic degradation ratio reached up to 95.5 %; and the photocatalytic reaction generated some valuable organics such as phenyl formate, benzaldehyde, and benzoic acid. This study would promote the high value-added utilization of lignocellulosic resources especially in the transformation of lignin, conforming the concept of sustainable development.

Synthesis of Multiple Emission Carbon Dots from Dihydroxybenzoic Acid via Decarboxylation Process

Carbon dots (CDs), as a new zero-dimensional carbon-based nanomaterial with desirable optical properties, exhibit great potential for many application fields. However, the preparation technique of multiple emission CDs with high yield is difficult and complex. Therefore, exploring the large-scale and straightforward synthesis of multicolor CDs from a simple carbon source is necessary. In this work, the solvent-free method prepares a series of multicolor emission CDs from dihydroxybenzoic acid (DHBA). The maximum emission wavelengths are 408, 445, 553, 580, and 610 nm, respectively, covering the visible light region. The 2,4- and 2,6-CDs possess the longer emission wavelength caused by the 2,4-, and 2,6-DHBA easily undergo decarboxylation to form the larger sp² domain graphitized structure. These CDs incorporated with g-C₃N₄ can significantly improve the photocatalytic water-splitting hydrogen production rate by extending the visible light absorption and enhancing the charge separation efficiency. The long-wavelength emission CDs can further enhance photocatalytic activity primarily by improving visible light absorption efficiency.

Surface-assisted synthesis of biomass carbon-decorated polymer carbon nitride for efficient visible light photocatalytic hydrogen evolution

Template is frequently studied as a structure-directing agent to tune the nanomorphology of photocatalysts. However, the influences of template on the polymerization of precursors and compositions of the resulting samples are rarely considered. Herein, a biomass carbon-modified graphitic carbon nitride (CCNx) with a thin-layer morphology is synthesized via one-pot surface-assisted polymerization of melamine precursor on organic yeast. The formation of the hydrogen bond between melamine and yeast induces a strong interfacial confinement, giving rise to small-sized CCNx. In addition, the carbon materials derived from yeast dramatically broaden n → π* visible light harvesting, improve electron delocalization, and greatly enhance charge carrier separation. The optimized CCNx presents a much higher photocatalytic hydrogen production rate of 2704 μmol g^-1h^-1 under visible light irradiation (λ ≥ 420 nm), which is nearly 11-fold that of its pristine counterpart. This work realizes the synergistic effect between morphology tunning and composition tailoring by using biomass template, which shows a great potential in developing efficient metal-free photocatalysts.

Visible Photocatalytic Hydrogen Evolution by g-C3N4/SrZrO3 Heterostructure Material

A heterostructure material g-C₃N₄/SrZrO₃ was simply prepared by grinding and heating the mixture of SrZrO₃ and g-C₃N₄. The morphology and structure of the synthesized photocatalysts were determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), high-resolution transmission electron microscopy (HRTEM) and infrared spectra. It showed visible light absorption ability and much higher photocatalytic activity than that of pristine g-C₃N₄ or SrZrO₃. Under the optimal reaction conditions, the hydrogen production efficiency is 1222 μmol·g^-1·h^-1 and 34 μmol·g^-1·h^-1 under ultraviolet light irradiation and visible light irradiation, respectively. It is attributed to the higher separation efficiency of photogenerated electrons and holes between the cooperation of g-C₃N₄ and SrZrO₃, which is demonstrated by photocurrent measurements.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Constructing novel graphitic carbon nitride-based nanocomposites - From the perspective of material dimensions and interfacial characteristics

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄), a fascinating metal-free conjugated polymer, has garnered immense interest in the fields of solar power generation and environmental remediation. The construction of g-C₃N₄-based nanocomposites with materials of various dimensions can further improve their photocatalytic activities by surface area enlargement, bandgap tuning, heterojunction formation, etc. In this paper, we comprehensively reviewed the design, synthesis, and functionalities of g-C₃N₄-based nanocomposites based on their applications in hydrogen evolution, CO₂ reduction, and pollutants removal. We provided detailed analyses on the integration of 2D g-C₃N₄ with zero-, one-, two-, and three-dimensional materials with a focus on their interfacial characteristics and functional improvement. This review aims to stimulate fresh ideas on the interfacial engineering of g-C₃N₄-based nanocomposites to broaden their future applications.

Self-Assembled Silver Nanoparticles Decorated on Exfoliated Graphitic Carbon Nitride/Carbon Sphere Nanocomposites as a Novel Catalyst for Catalytic Reduction of Cr(VI) to Cr(III) from Wastewater and Reuse for Photocatalytic Applications

Silver nanoparticles decorated on an exfoliated graphitic carbon nitride/carbon sphere (AgNP/Eg-C₃N₄/CS) nanocomposites were synthesized by an adsorption method with a self-assembled process. These nanoparticles were characterized by different techniques like UV-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), Raman spectroscopy, scanning electron spectroscopy (SEM), transmission electron spectroscopy (TEM), electrochemical impedance spectroscopy (EIS), and ζ potential. AgNP/Eg-C₃N₄/CS nanocomposites showed a higher catalytic reduction activity for the conversion of Cr(VI) into Cr(III) with formic acid (FA) at 45 °C when compared to bulk graphitic carbon nitride (Bg-C₃N₄, Eg-C₃N₄, CS, and Eg-C₃N₄/CS). The kinetic rate constants were determined as a function of catalyst dosage, concentration of Cr(VI), pH, and temperature for the AgNP/Eg-C₃N₄/CS nanocomposite. This material showed higher reduction efficiency (98.5%, k = 0.0621 min^-1) with turnover frequency (0.0158 min^-1) for the reduction of Cr(VI) to Cr(III). It also showed great selectivity and high stability after six repeated cycles (98.5%). Further, the reusability of the Cr(III)-AgNP/Eg-C₃N₄/CS nanocomposite was also investigated for the photocatalytic degradation of methylene blue (MB) under visible light irradiation with various time intervals and it showed good degradation efficiency (α = 97.95%). From these results, the AgNP/Eg-C₃N₄/CS nanocomposite demonstrated higher catalytic activity, improved environmental friendliness, lower cost for the conversion of toxic Cr(VI) to Cr(III) in solutions, and also good reusability.

Bifunctional Nitrogen-Doped Carbon Dots in g-C3N4/WOx Heterojunction for Enhanced Photocatalytic Water-Splitting Performance

A novel metal-free all-solid-state z-scheme g-C₃N₄/NCDs/WO_x photocatalyst was fabricated using nitrogen-doped carbon dots (NCDs) as the electron mediator. As-prepared sandwich-structured composites displayed enhanced visible and NIR light photocatalytic activity. Under visible light irradiation, the hydrogen evolution rate reached 3.27 mmol g^-1 h^-1, which increased to roughly seven times higher than that of pure g-C₃N₄ and roughly twice that of g-C₃N₄/NCDs or g-C₃N₄/WO_x binary heterojunctions. The apparent quantum efficiency is 7.58% at 420 nm. The localized surface plasmon resonance effect of WO_x and the up-converted photoluminescence property of NCDs enhanced the utilization efficiency of NIR light together. In addition, the matched energy band structures of WO_x and g-C₃N₄ as well as the effective electron conductor (NCDs) between them accelerate electron transfer at the interface. The all-solid-state z-scheme g-C₃N₄/NCDs/WO_x photocatlyst was confirmed by a series of characterizations and experiment results. This report offered new insights into constructing an efficient all-solid-state z-scheme photocatalyst to be applied during the photocatalytic water-splitting reaction in the visible and NIR light regions.

Near-Infrared-Driven Photocatalysts: Design, Construction, and Applications

Photocatalysts, which utilize solar energy to catalyze the oxidation or reduction half reactions, have attracted tremendous interest due to their great potential in addressing increasingly severe global energy and environmental issues. Solar energy utilization plays an important role in determining photocatalytic efficiencies. In the past few decades, many studies have been done to promote photocatalytic efficiencies via extending the absorption of solar energy into near-infrared (NIR) light. This Review comprehensively summarizes the recent progress in NIR-driven photocatalysts, including the strategies to harvest NIR photons and corresponding photocatalytic applications such as the degradation of organic pollutants, water disinfection, water splitting for H₂ and O₂ evolution, CO₂ reduction, etc. The application of NIR-active photocatalysts employed as electrocatalysts is also presented. The subject matter of this Review is designed to present the relationship between material structure and material optical properties as well as the advantage of material modification in photocatalytic reactions. It paves the way for future material design in solar energy-related fields and other energy conversion and storage fields.

Photogenerated Holes Mediated Nitric Oxide Production for Hypoxic Tumor Treatment

Nitric oxide (NO) is a gaseous signal molecule with multiple physiological functions, and it also plays a key role in cancer therapy. However, the production of NO which depends on O₂ or H₂ O₂ is limited within the tumor microenvironment, leading to unsatisfactory anticancer effect. Herein, we report a NO-based phototherapeutic strategy mediated by photogenerated holes for hypoxic tumors, which is achieved by irradiation of the poly-L-arginine modified carbon-dots-doped graphitic carbon nitride nanomaterial (ArgCCN). Upon red light irradiation, the photogenerated holes on ArgCCN oxidized water into H₂ O₂ which subsequently oxidized the arginine residues to produce NO. In vitro and in vivo experiments showed that the high concentration of NO produced by ArgCCN could induce cancer cell apoptosis. The presented phototherapeutic strategy is based on microenvironment-independent photogenerated holes mediated oxidation reaction, paving the way for the development of NO therapeutic strategy.

The in situ photodeposition fabrication of a NixCoy/g-C3N4 photocatalyst for efficient catalytic hydrogen generation

Photocatalytic H2 evolution on Ni23Co1/CN was demonstrated.

Amperometric sensing of catechol by using a nanocomposite prepared from Ag/Ag2O nanoparticles and N,S-doped carbon quantum dots

This work describes the synthesis of a nanocomposite consisting of Ag₂O, silver nanoparticles and N,S-doped carbon quantum dots (Ag₂O/Ag@NS-CQD). The NS-CQD were prepared by hydrothermal treatment of p-aminobenzenesulfonic acid. They act as both the reducing and stabilizing agent for synthesis of Ag₂O/Ag@NS-CQD. The composite was characterized by UV-vis spectroscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The glassy carbon electrode (GCE) was modified by coating it with Ag₂O/Ag@NS-CQD. It exhibits excellent amperometric response to catechol, typically at a low working potential of around 0.25 V. Under the best experimental conditions, the sensor has a wide linear response (0.2 to 180 μM) and a low detection limit (13 nM; at S/N = 3). The method was applied to analysis of spiked water samples and gave satisfactory results. Graphical abstract Schematic representation of the preparation of the Ag/Ag2O@N,S-doped carbon quantum dots composite using p-aminobenzenesulfonic acid and silver nitrate as the starting materials. The corresponding modified glassy carbon electrode exhibits the excellent amperometric sensing performance toward catechol at pH 7.0 with low detection limit and good selectivity.

Latest progress in constructing solid-state Z scheme photocatalysts for water splitting

Artificial Z scheme photocatalysis has been considered as a promising strategy for producing the clean energy source of hydrogen gas. The core of the Z scheme is a two-step excitation process in a tandem structured photosystem aiming to satisfy both the criteria of wide range solar spectrum absorption and strong thermodynamic driving force for photolysis reactions. Therefore, efficient connection and matching between the two photosystems is the key to improve the photocatalytic activity. Recently, new progress has been achieved concerning the principles and applications of state-of-the-art solid-state Z schematic systems to enhance the photocatalytic efficiency and repress competitive reactions. This review summarizes the latest approaches to all-solid-state Z schemes for photocatalytic water splitting, including new tandem structures, new morphologies, and new connection modes to improve light absorption as well as carrier transportation. The challenges for developing novel high performance Z scheme photocatalysts are also discussed.

Carbon nitrides and metal nanoparticles: from controlled synthesis to design principles for improved photocatalysis

The use of sunlight to drive chemical reactions via photocatalysis is of paramount importance towards a sustainable future. Among several photocatalysts, earth-abundant polymeric carbon nitride (PCN, often wrongly named g-C3N4) has emerged as an attractive candidate due to its ability to absorb light efficiently in the visible and near-infrared ranges, chemical stability, non-toxicity, straightforward synthesis, and versatility as a platform for constructing hybrid materials. Especially, hybrids with metal nanoparticles offer the unique possibility of combining the catalytic, electronic, and optical properties of metal nanoparticles with PCN. Here, we provide a comprehensive overview of PCN materials and their hybrids, emphasizing heterostructures with metal nanoparticles. We focus on recent advances encompassing synthetic strategies, design principles, photocatalytic applications, and charge-transfer mechanisms. We also discuss how the localized surface plasmon resonance (LSPR) effect of some noble metals NPs (e.g. Au, Ag, and Cu), bimetallic compositions, and even non-noble metals NPs (e.g., Bi) synergistically contribute with PCN in light-driven transformations. Finally, we provide a perspective on the field, in which the understanding of the enhancement mechanisms combined with truly controlled synthesis can act as a powerful tool to the establishment of the design principles needed to take the field of photocatalysis with PCN to a new level, where the desired properties and performances can be planned in advance, and the target material synthesized accordingly.

From UV to Near-Infrared Light-Responsive Metal-Organic Framework Composites: Plasmon and Upconversion Enhanced Photocatalysis

The exploitation of photocatalysts that harvest solar spectrum as broad as possible remains a high-priority target yet grand challenge. In this work, for the first time, metal-organic framework (MOF) composites are rationally fabricated to achieve broadband spectral response from UV to near-infrared (NIR) region. In the core-shell structured upconversion nanoparticles (UCNPs)-Pt@MOF/Au composites, the MOF is responsive to UV and a bit visible light, the plasmonic Au nanoparticles (NPs) accept visible light, whereas the UCNPs absorb NIR light to emit UV and visible light that are harvested by the MOF and Au once again. Moreover, the MOF not only facilitates the generation of "bare and clean" Au NPs on its surface and realizes the spatial separation for the Au and Pt NPs, but also provides necessary access for catalytic substrates/products to Pt active sites. As a result, the optimized composite exhibits excellent photocatalytic hydrogen production activity (280 µmol g^-1 h^-1 ) under simulated solar light, and the involved mechanism of photocatalytic H₂ production under UV, visible, and NIR irradiation is elucidated. Reportedly, this is an extremely rare study on photocatalytic H₂ production by light harvesting in all UV, visible, and NIR regions.

Near-Infrared-Driven Selective Photocatalytic Removal of Ammonia Based on Valence Band Recognition of an α-MnO2/N-Doped Graphene Hybrid Catalyst

Near-infrared (NIR)-response photocatalysts are desired to make use of 44% NIR solar irradiation. A flower-like α-MnO₂/N-doped graphene (NG) hybrid catalyst was synthesized and characterized by X-ray diffraction spectroscopy, transmission electron microscopy, Raman spectroscopy, UV-vis-NIR diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The flower-like material of α-MnO₂/NG was oval-shaped with the semi major axis of 140 nm and semi minor axis of 95 nm and the petal thickness of 3.5-8.0 nm. The indirect band gap was measured to be 1.16 eV, which is very close to 0.909 eV estimated by the first-principles calculation. The band gap can harvest NIR irradiation to 1069 nm. The coupling of α-MnO₂ with NG sheets to form α-MnO₂/NG can significantly extend the spectrum response up to 1722 nm, improving dramatically the photocatalytic activity. The experimental results displayed that the α-MnO₂/NG hybrid catalyst can recognize ammonia in methyl orange (MO)-ammonia, rhodamine B (RHB)-ammonia, and humic acid-ammonia mixed solutions and selectively degrade ammonia. The degradation ratio of ammonia reached over 93.0% upon NIR light irradiation in the mixed solutions, while those of MO, RHB, and humic acid were only 9.7, 9.4, and 15.7%, respectively. The products formed during the photocatalytic process were followed with ion chromatography, gas chromatography, and electrochemistry. The formed nitrogen gas has been identified during the photocatalytic process. A valence band recognition model was suggested based on the selective degradation of ammonia via α-MnO₂/NG.

Efficient energy-level modification of novel pyran-annulated perylene diimides for photocatalytic water splitting

We design and synthesize four pyran-embedded perylene diimide (PDI) compounds through a straightforward methodology. UV-driven photocatalytic water splitting using the compounds as photocatalysts demonstrates that the highest photocatalytic H₂ evolution rate under UV light is 0.90 mmol g^-1 h^-1, which paves the way towards organic photoresponsive materials.

Carbon Dots: Bottom-Up Syntheses, Properties, and Light-Harvesting Applications

The development of cost-effective and environmentally friendly photocatalysts and photosensitizers has received tremendous attention because of their potential utilization in solar-light-harvesting applications. In this respect, carbon dots (CDs) prepared by bottom-up methods have been considered to be promising light-harvesting materials. Through their preparation from various molecular precursors and synthetic methods, CDs exhibit excellent optical and charge-transfer properties. Furthermore, their photophysical properties can be readily optimized and enhanced by means of doping, functionalization, and post-synthetic treatment. In this review, we summarize the recent progress in CDs synthesized using bottom-up approaches. These CDs exhibit strong light absorption and unique electron donor/acceptor capabilities for light-harvesting applications. We anticipate that this review will provide new insights into novel types of photosensitizers and photocatalysts for a wide range of applications.

Sugarcane juice derived carbon dot-graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

Carbon dots (CDs) and graphitic carbon nitride (g-C3N4) composites (CD/g-C3N4) were successfully synthesized by a hydrothermal method using urea and sugarcane juice as starting materials. The chemical composition, morphological structure and optical properties of the composites and CDs were characterized using various spectroscopic techniques as well as transmission electron microscopy. X-ray photoelectron spectroscopy (XPS) results revealed new signals for carbonyl and carboxyl groups originating from the CDs in CD/g-C3N4 composites while X-ray diffraction (XRD) results showed distortion of the host matrix after incorporating CDs into g-C3N4. Both analyses signified the interaction between g-C3N4 and CDs. The photoluminescence (PL) analysis indicated that the presence of too many CDs will create trap states at the CD/g-C3N4 interface, decelerating the electron (e-) transport. However, the CD/g-C3N4(0.5) composite with the highest coverage of CDs still achieved the best bisphenol A (BPA) degradation rate at 3.87 times higher than that of g-C3N4. Hence, the charge separation efficiency should not be one of the main factors responsible for the enhancement of the photocatalytic activity of CD/g-C3N4. Instead, the light absorption capability was the dominant factor since the photoreactivity correlated well with the ultraviolet-visible diffuse reflectance spectra (UV-vis DRS) results. Although the CDs did not display upconversion photoluminescence (UCPL) properties, the π-conjugated CDs served as a photosensitizer (like organic dyes) to sensitize g-C3N4 and injected electrons to the conduction band (CB) of g-C3N4, resulting in the extended absorption spectrum from the visible to the near-infrared (NIR) region. This extended spectral absorption allows for the generation of more electrons for the enhancement of BPA degradation. It was determined that the reactive radical species responsible for the photocatalytic activity were the superoxide anion radical (O2•-) and holes (h+) after performing multiple scavenging tests.

A facile approach to synthesize graphitic carbon nitride microwires for enhanced photocatalytic H2 evolution from water splitting under full solar spectrum

Photocatalytic hydrogen evolution from water splitting.

Effect of Nitrogen Doping Level on the Performance of N-Doped Carbon Quantum Dot/TiO2 Composites for Photocatalytic Hydrogen Evolution

Carbon quantum dots (CQDs) have attracted widespread interest for photocatalytic applications, owing to their low cost and excellent electron donor/acceptor properties. However, their advancement as visible-light photosensitizers in CQDs/semiconductor nanocomposites is currently impaired by their poor quantum yields (QYs). Herein, we describe the successful fabrication of a series of nitrogen-doped CQDs (NCDs) with N/C atomic ratios ranging from 0.14-0.30. NCDs with the highest N-doping level afforded a remarkable external QY of 66.8 % at 360 nm, and outstanding electron transfer properties and photosensitization efficiencies when physically adsorbed on P25 TiO₂ . A NCDs/P25-TiO₂ hybrid demonstrated excellent performance for hydrogen evolution in aqueous methanol under both UV and visible-light illumination relative to pristine P25 TiO₂ . Controlled nitrogen doping of CQDs therefore represents a very effective strategy for optimizing the performance of CQDs/semiconductor hybrid photocatalysts.

Dual Effect in Fluorine-Doped Hematite Nanocrystals for Efficient Water Oxidation

Herein, excellent light absorption and oxygen-evolving activity were simultaneously achieved by doping fluorine anions into hematite nanocrystals. Upon anion doping, the band structure of hematite can be effectively regulated, leading to the generation of defect levels between the band gap and remarkably increased visible light absorption. The activity for electrocatalytic oxygen evolution reaction (OER) of the hematite nanocrystals is enhanced after fluorine doping, where the doped hematite assists as an effective catalyst for photoelectrochemical water splitting. The optimization strategy proposed herein may shed light on the future design of photocatalysts for energy-related applications.

Carbon Dots/g-C3N4 Nanoheterostructures-Based Signal-Generation Tags for Photoelectrochemical Immunoassay of Cancer Biomarkers Coupling with Copper Nanoclusters

A class of 0-dimensional/2-dimensional (0D/2D) nanoheterostructures based on carbon quantum dots (CQDs) and graphitic carbon nitride (g-C₃N₄) was designed as the signal-generation tags for the sensitive photoelectrochemical (PEC) immunoassay of prostate-specific antigen (PSA) coupling with the copper nanoclusters (CuNCs). Combination of CQDs with g-C₃N₄ promoted the photoexcited electron/hole separation and largely increased the photocurrents of the nanoheterostructures. Initially, a sandwich-type immunoreaction was carried out on monoclonal anti-PSA antibody-coated microplate by using PSA aptamer linked with CuNCs as the tracer. Accompanying the immunocomplex, the carried CuNCs were dissolved under acidic conditions. The as-released copper ions from the CuNCs could be captured onto the CQDs/g-C₃N₄ nanoheterostructures via the amino-group on the CQD surface as well as the -NH_x (x = 1, 2, 3) of g-C₃N₄ nanosheets. The strong coordination of the Lewis basic sites on the CQDs/g-C₃N₄ with Cu²⁺ decreased the photocurrent of the nanoheterostructures. Under optimal conditions, CQDs/g-C₃N₄ nanoheterostructures displayed good photocurrent responses for the detection of PSA within the dynamic linear range of 0.02-100 ng mL^-1 and a limit of detection (LOD) of 5.0 pg mL^-1. This method was also evaluated for quantitative screening of human PSA serum specimens by using the referenced electrochemiluminescent enzyme-linked immunoassay (ECL-ELIA) and gave good matched results between two methods. Additionally, this system was beneficial to explore the charge-separation and photoinduced electron transfer mechanism in the photoelectrochemical sensing protocols.

Facile transformation of low cost melamine–oxalic acid into porous graphitic carbon nitride nanosheets with high visible-light photocatalytic performance

The high visible-light photocatalytic performance of porous g-C₃N₄nanosheets were prepared by using a long strip-like structure of melamine–oxalic acid (MO) as a precursor.

Metal free and efficient photoelectrocatalytic removal of organic contaminants over g-C3N4 nanosheet films decorated with carbon quantum dots

As a typical metal-free semiconductor photocatalyst, a composite photocatalyst comprised of g-C₃N₄ nanosheets decorated with carbon quantum dots (CQDs/g-C₃N₄) was synthesized via a simple ultrasonic dispersion self-assembly method.

Advances, challenges and promises of carbon dots

Carbon-dots with unique physical and chemical properties have versatile applications in environmental and energy fields.

A facile hydrothermal synthesis of carbon dots modified g-C3N4 for enhanced photocatalytic H2-evolution performance

A facile strategy to realize the homogeneous and solid modification of carbon dots on the g-C₃N₄ surface.

In situ synthesis of g-C3N4/TiO2 heterostructures with enhanced photocatalytic hydrogen evolution under visible light

C₃N₄ nanosheets/TiO₂ nano-heterostructures have been synthesized via a novel method, exhibiting excellent photocatalytic hydrogen generation under visible light irradiation.

Smart Utilization of Carbon Dots in Semiconductor Photocatalysis

Efficient capture of solar energy will be critical to meeting the energy needs of the future. Semiconductor photocatalysis is expected to make an important contribution in this regard, delivering both energy carriers (especially H₂ ) and valuable chemical feedstocks under direct sunlight. Over the past few years, carbon dots (CDs) have emerged as a promising new class of metal-free photocatalyst, displaying semiconductor-like photoelectric properties and showing excellent performance in a wide variety of photoelectrochemical and photocatalytic applications owing to their ease of synthesis, unique structure, adjustable composition, ease of surface functionalization, outstanding electron-transfer efficiency and tunable light-harvesting range (from deep UV to the near-infrared). Here, recent advances in the rational design of CDs-based photocatalysts are highlighted and their applications in photocatalytic environmental remediation, water splitting into hydrogen, CO₂ reduction, and organic synthesis are discussed.