Novel fluorescent self-assembling material with gel properties: ion recognition and energy transfer

A novel fabrication strategy for preparing fluorescent nanomaterials has been proposed based on supramolecular self-assembly complexes and energy transfer. Here a dual acylhydrazone-functionalized molecule (DAF) was designed and synthesized by...

Carbon dot based nucleus targeted fluorescence imaging and detection of nuclear hydrogen peroxide in living cells

Investigation of the intracellular generation of H2O2, one of the most important reactive oxygen species (ROS), is crucial for preventing various diseases since it is closely linked with different physiological and complex cell signaling pathways. Despite the development of various fluorescent probes, the majority of the fluorescent probes cannot move across the nuclear membrane. However, detection of the nuclear level of H2O2 is very important since it can directly cause oxidative DNA damage which ultimately leads to various diseases. Therefore, in this study, p-phenylenediamine based carbon quantum dots (B-PPD CDs) have been synthesized and integrated with 4-formylbenzeneboronic acid as a doping agent for the detection of H2O2. The detection mechanism showed that, upon exposure to H2O2, the fluorescence of the B-PPD CDs was immediately quenched. Further investigation has been done in the in vitro RAW 264.7 cell line by both exogenous and endogenous exposure of H2O2 to demonstrate the feasibility of the method. It is shown successfully that the exogenous presence and endogenous generation of H2O2 in RAW 264.7 cells can be detected using B-PPD CDs. The limit of detection (LOD) was determined to be 0.242 μM. The development of such imaging probes using carbon quantum dots will lead to live-cell imaging as well as ROS detection.

Efficient Hydro- and Organogelation by Minimalistic Diketopiperazines Containing a Highly Insoluble Aggregation-Induced, Blue-Shifted Emission Luminophore*

We report the synthesis, gelation abilities and aggregation-induced, blue-shifted emission (AIBSE) properties of two minimalistic diketopiperazine-based gelators. Despite containing a highly insoluble luminophore that makes up more than half of their respective molecular masses, efficient hydrogelation by multiple stimuli for one and efficient organogelation for the other compound are reported. Insights into the aggregation and gelation properties were gained through examination of the photophysical and material properties of selected gels, which are representative of the different modes of gelation. The synthesis of the gelators is highly modular and based on readily available amino acid building blocks, allowing the efficient and rapid diversification of these core structures and fine-tuning of gel properties.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Small-molecule Bifunctional Fluorescent Probes for the Differential Detection of Multiple Guests

During the last few years, the preparation of bifunctional fluorescent probes, which exhibit differential response towards multiple analytes, has attracted considerable attention since they are cost-effective and highly desirable for real-time applications. This review focuses on the recent advances in the design principles, recognition mechanisms, and applications of multifunctional fluorescent probes for the differential detection of multiple guests.

Double addition of phenylacetylene onto the mixed bridge phosphinito-phosphanido Pt(i) complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt)

The reaction of the dinuclear phosphinito bridged complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (1) with phenylacetylene affords the η1-alkenyl-μ,η1:η2-alkynyl complex [(η1-trans-(Ph)HC[double bond, length as m-dash]CH)(PHCy2)Pt(μ-PCy2)(μ,η1:η2-PhC[triple bond, length as m-dash]C)Pt{κP-P(O)Cy2}(PHCy2)] (4) displaying a σ-bonded 2-phenylethenyl ligand and an alkynyl (μ-κCα:η2) bridge between the platinum atoms. Complex 4 was shown to form in two steps: initially, the attack of the first molecule of phenylacetylene gives the σ-acetylide complex [(PHCy2)(η1-PhC[triple bond, length as m-dash]C)Pt1(μ-PCy2)Pt2(PHCy2){κP-P(OH)Cy2}](Pt-Pt) (5) featuring an intramolecular π-type hydrogen bond between the POH and the C[triple bond, length as m-dash]C triple bond; fast reaction of 5 with a second molecule of phenylacetylene results in the oxidative addition of the terminal C-H bond of the second alkyne to Pt1 that, after rearrangements, leads to 4. When left in solution for two weeks, complex 4 spontaneously isomerizes completely to [(PHCy2)(η1-trans-(Ph)HC[double bond, length as m-dash]CH)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(η1-PhC[triple bond, length as m-dash]C)(PHCy2)] (7) displaying a 2-phenylethenyl ligand and a phenylethynyl group both σ-bonded to the metal. Density functional calculations at the B3LYP/LACV3P++**//DFT/LACVP* level were carried out to study the thermodynamics of the formation of all considered complexes and to trace the mechanism of formation of the observed products.

Small-molecule fluorescent probes for specific detection and imaging of chemical species inside lysosomes

In the past few years, the preparation of novel small-molecule fluorescent probes for specific detection and imaging of chemical species inside lysosomes has attracted considerable attention because of their wide applications in chemistry, biology, and medical science. This feature article summarizes the recent advances in the design and preparation of small-molecule fluorescent probes for specific detection of chemical species inside lysosomes. In addition, their properties and applications for the detection and imaging of pH, H2O2, HOCl, O2˙-, lipid peroxidation, H2S, HSO3-, thiols, NO, ONOO-, HNO, Zn2+, Cu2+, enzymes, etc. in lysosomes are discussed as well.

Multi-stimuli responsive supramolecular gels based on a D-π-A structural cyanostilbene derivative with aggregation induced emission properties

Developing multi-stimuli responsive fluorescent gel materials in a single system remains challenging. Gelator molecules with classical fluorophores suffer from the aggregation-caused quenching (ACQ) effect, limiting their applications further. Herein, a novel V-shaped cyanostilbene-based molecule (BAPBIA) with aggregation induced emission (AIE) characteristics and great gelation ability was synthesized and was found to exhibit multi-stimuli responsive behaviors. Reversible gel-sol phase transitions together with emission quenching are realized in response to external stimuli including heat, light and fluoride ions. Especially, the introduction of a dimethylaniline group (donor) and a cyano group (acceptor) generates a D-π-A structure, further leading to an intramolecular charge transfer (ICT) effect, which enlarges the emission contrast with the variation of the distribution of charge. Thus, upon trifluoroacetic acid (TFA) triggered protonation of the dimethylaniline group, not only a gel-sol transition but also emission color switching (yellow-to-blue) is achieved due to the loss of the ICT effect. This work paves an easy way to construct fully reversible multi-stimuli responsive fluorescence modulation smart materials.

Supramolecular Gel Based on Crown-Ether-Appended Dynamic Covalent Macrocycles

A new type of dynamic covalent macrocycle with self-promoted supramolecular gelation behavior is developed. Under oxidative conditions, the dithiol compound containing a diamide alkyl linker with an odd number (7) of carbon chain and an appended crown ether shows a remarkable gelation ability in acetonitrile, without any template molecules. Due to the existence of crown ethers and disulfide bonds, the obtained gel shows a multiple stimuli-responsiveness behavior. The mechanical properties and reversibility of the gel are investigated. Computational modeling suggests that the peripheral chain for diamide hydrogen bonding is responsible for the gelation process.

Cytidine and ribothymidine nucleolipids synthesis, organogelation, and selective anion and metal ion responsiveness

Nucleolipids of 2′,3′-O-diacylatedribothymidine supports the organogelation by utilizing inherent self-base pairing and solvent mediated bifurcated H-bonding and hydrophobic effect. These organogels exhibits unusual Hg²⁺ mediated base pairing.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

Hierarchical self-assembly of a fluorescence emission-enhanced organogelator and its multiple stimuli-responsive behaviors

A discrete hexagonal metallacycle 1 decorated with tetraphenylethylene, amide groups and long hydrophobic alkyl chains was constructed via [3 + 3] coordination-driven self-assembly, from which the fluorescence emission-enhanced organogelator with multiple stimuli-responsiveness was successfully prepared via hierarchical self-assembly.

Effect of phosphine ligand on the optical absorption/emission properties of platinum-containing conjugated polymers

The λ_max values of platinum-containing poly(phenyleneethynylene)s with aryl groups bonded to P were higher than those with alkyl groups.

A multi-stimuli responsive metallosupramolecular polypseudorotaxane gel constructed by self-assembly of a pillar[5]arene-based pseudo[3]rotaxane via zinc ion coordination and its application for highly sensitive fluorescence recognition of metal ions

A novel pillar[5]arene-based metallosupramolecular polypseudorotaxane gel has been successfully prepared.

An N-nitrosation reactivity-based two-photon fluorescent probe for the specific in situ detection of nitric oxide

In situ fluorescence imaging of nitric oxide (NO) is a powerful tool for studying the critical roles of NO in biological events. However, the selective imaging of NO is still a challenge because most currently available fluorescent probes rely on the o-phenylenediamine (OPD) recognition site, which reacts with both NO and some abundant reactive carbonyl species (RCS) (such as dehydroascorbic acid and methylglyoxal) and some reactive oxygen/nitrogen species (ROS/RNS). To address this problem, a new fluorescent probe, NCNO, based on the N-nitrosation of aromatic secondary amine was designed to bypass the RCS, ROS, and RNS interference. As was expected, the probe NCNO could recognize NO with pronounced selectivity and sensitivity among ROS, RNS, and RCS. The probe was validated by detecting NO in live cells and deep tissues owing to its two-photon excitation and red-light emission. It was, hence, applied to monitor NO in ischemia reperfusion injury (IRI) in mice kidneys by two-photon microscopy for the first time, and the results vividly revealed the profile of NO generation in situ during the renal IRI process.

A turn-on fluorescent probe for Cd2+ detection in aqueous environments based on an imine functionalized nanoscale metal–organic framework

A turn-on MOF-based fluorescent probe for Cd²⁺ detection has been developed with high sensitivity and excellent selectivity.

AIEgens-Functionalized Inorganic-Organic Hybrid Materials: Fabrications and Applications

Inorganic materials functionalized with organic fluorescent molecules combine advantages of them both, showing potential applications in biomedicine, chemosensors, light-emitting, and so on. However, when more traditional organic dyes are doped into the inorganic materials, the emission of resulting hybrid materials may be quenched, which is not conducive to the efficiency and sensitivity of detection. In contrast to the aggregation-caused quenching (ACQ) system, the aggregation-induced emission luminogens (AIEgens) with high solid quantum efficiency, offer new potential for developing highly efficient inorganic-organic hybrid luminescent materials. So far, many AIEgens have been incorporated into inorganic materials through either physical doping caused by aggregation induced emission (AIE) or chemical bonding (e.g., covalent bonding, ionic bonding, and coordination bonding) caused by bonding induced emission (BIE) strategy. The hybrid materials exhibit excellent photoactive properties due to the intramolecular motion of AIEgens is restricted by inorganic matrix. Recent advances in the fabrication of AIEgens-functionalized inorganic-organic hybrid materials and their applications in biomedicine, chemical sensing, and solid-state light emitting are presented.

Our Expedition in Linear Neutral Platinum-Acetylide Complexes: The Preparation of Micro/nanostructure Materials, Complicated Topologies, and Dye-Sensitized Solar Cells

During the past few decades, the construction of various kinds of platinum-acetylide complexes has attracted considerable attention, because of their wide applications in photovoltaic cells, non-linear optics, and bio-imaging materials. Among these platinum-acetylide complexes, the linear neutral platinum-acetylide complexes, due to their attractive properties, such as well-defined linear geometry, synthetic accessibility, and intriguing photoproperties, have emerged as a rising star in this field. In this personal account, we will discuss how we entered the field of linear neutral platinum-acetylide chemistry and what we found in this field. The preparation of various types of linear neutral platinum-acetylide complexes and their applications in the areas of micro/nanostructure materials, complicated topologies, and dye-sensitized solar cells will be summarized in this account.

Fluorescent probes for the selective detection of chemical species inside mitochondria

This feature article systematically summarizes the development of fluorescent probes for the selective detection of chemical species inside mitochondria.

A selective fluorescent probe for the detection of Cd2+ in different buffer solutions and water

A fluorescent probe NHQ, which exhibited excellent selectivity toward Cd²⁺ in different buffer solutions such as Tris-HCl buffer solution, HEPES buffer solution, and PBS buffer solution, and even in water, was developed.