Improved selectivity of electrochemical aniline sensing using one-dimensional silver nanorods with high aspect ratio synthesized by ascorbic acid assisted method

BACKGROUND

Aniline serves as a pivotal precursor in many industries such as pesticides, pharmaceuticals, and chemicals. However, its ingestion can lead to severe health consequences, including the potential to induce cancer, respiratory tract irritation, and adverse effects on the nervous and digestive systems in the human body. The widespread use of aniline in industrial processes, coupled with inadequate wastewater management that allows for the direct release of aniline into the environment, leads to surface and groundwater contamination. Therefore, it becomes crucial to devise a reliable electrochemical sensor capable of detecting even trace amounts of aniline.

RESULTS

This study presents a modified polyol synthesis method for producing silver nanorods (AgNRs, length: 861-1345 nm, diameter: 66-107 nm) with preferential growth along the (111) crystal plane. Immobilizing AgNRs on a glassy carbon (GC) electrode with Nafion as a binder decreases its charge transfer resistance from 3040 to 129 kΩ and increases its electroactive area from 0.034 to 0.101 cm2. AgNRs/GC electrode exhibited an aniline detection limit of 0.032 μM and sensitivity of 1.4841 μA.M-1cm-2 within a linear range of 0-10 μM using square wave voltammetry (SWV). The reaction rate constant of aniline sensing was determined to be 0.08697 s-1. Chlorobenzene, acephate, and chlorpyrifos could not interfere aniline detection, and 26 % decrease in peak response was observed after the 10th cycle of aniline sensing. The sensor demonstrated ∼100 % recovery for aniline, comparable to the performance of high-performance liquid chromatography when applied to real-world samples like tap and river water.

SIGNIFICANCE

The electrochemical sensing of aniline is notably efficient in tap and river water within the acceptable limit, by utilizing one dimensional AgNRs functionalized GC electrode. Importantly, the presence of interferents does not compromise the sensitivity of the sensor. Therefore, one dimensional AgNRs synthesized via a modified polyol route emerge as a promising electrocatalyst for the in-situ detection and determination of aniline.

RhB-Embedded Mn-MOF with Cyclotriphosphazene Skeleton as Dual-Emission Sensor for Putrescine as well as Smart Fluorescent Response of Aromatic Diamines and Nitrophenol

Luminescent metal-organic framework composites with multiple luminescence emissions have been efficient sensing platforms. Herein, a fluorescent sensor (RhB@1-0.4) with dual-emission fluorescence properties was prepared by introducing rhodamine B (RhB) into the framework of complex 1, [Mn2.5(HCPCP)(H2O)4]·(CH3CN)0.5 [HCPCP = hexa-(4-carboxyl-phenoxy)-cyclotriphosphazene and CH3CN = acetonitrile), which is a novel crystalline two-dimensional (2D) coordinated organic framework material. It is a highly desirable material, realizing a ratiometric fluorescence response to putrescine with a high signal-to-noise ratio, and the detection limit can be as low as 6.8 μM. In addition, RhB@1-0.4 exhibited a better fluorescent sensing performance for aromatic diamines and nitrophenols compared with that of complex 1. It is a potential functionalized MOF material for the application of multichannel fluorescence sensing.

An Ir(III) cyclometalate-functionalized molecularly imprinted polymer: photophysics, photochemistry and chemosensory applications

A luminescent trimethylamine (TMA) sensor, PTMA-Ir, has been designed and synthesized through immobilizing a phosphorescent iridium(III) complex on a TMA-imprinted polymer. Detailed study shows that the quenching of phosphorescence of PTMA-Ir can serve as a reporter for the binding of TMA on the imprinting sites, thus providing a sensitive, selective, and rapid detection of TMA in both aqueous solutions and gaseous states. Loading PTMA-Ir on filter paper produced a deposition T-Ir, the phosphorescence of which is quenched within 5 s upon exposure to TMA vapor with detection limits of 9.0 ± 0.1 ppm under argon and 15.0 ± 0.1 ppm in an air atmosphere. This work provided an effective method for establishing an imprinting polymer-immobilized luminescent amine sensor.

Rapid SERS inspection of carcinogenic aromatic amines in textiles by using liquid interfacial assembled Au array

Wide uses of azo dyes produce a great risk of high residuals of carcinogenic aromatic amines, and hence it is important to rapidly analyze these carcinogenic compounds in the textile products to guarantee product safety. In the present work, a surface enhanced Raman spectroscopic (SERS) method was developed for rapid detection of carcinogenic aromatic amines in textiles. In this method, target aromatic amines are extracted from textiles, and then gold nanoparticles are added to the organic extractant, which assemble into closely packed Au array at liquid interface in situ. Finally, fingerprint SERS signals of the target aromatic amines are detected on the generated Au array on the basis of strong chemical interaction between the aromatic amines and the Au surface. The proposed method provided good reproducibility with a relative standard deviation of 3.5% for ten parallel tests of benzidine. It was applied to analyze 70 textile products. To strengthen the spectroscopic data processing, a cluster analysis model was established with 50 samples to automatically identify the spectra based on the good signal reproducibility. The other 20 samples were used as test sets to validate this model. It was found that all the positive samples were successfully identified with false positive rate of 20%. With the addition of the Artificial Intelligence step, the reliability of the discriminant results can be ensured.

An electron-deficient naphthalene diimide-based metal-organic framework for detecting electron-rich molecules through photo-/chemo-induced chromism

A novel naphthalene diimide-based metal-organic framework (MOF) {[Zn(3-DPMNI)_0.5(NDC)]·3DMF} (1@DMF), (H₂NDC = 2,6-naphthalenedicarboxylic acid, DPMNI = N,N'-bis(3-pyridylmethyl)-1,4,5,8-naphthalene diimide, DMF = N,N'-dimethylformamide), has been synthesized, which shows a 3D pillar-layer architecture built of carboxylate layers and naphthalene diimide pillars. The compound exhibits outstanding photochromic performance due to photoinduced electron transfer (ET) between the electron-rich guest molecules and electron-deficient host framework (host-guest ET). Of note, the host framework of 1 cannot show a macroscopic color change owing to the absence of the ET pathway. Nevertheless, it exhibits discriminative photochromic behavior in the presence of electron-rich solvents, which is mainly attributed to different electron-donating abilities of guest solvents and distinct interfacial contacts of electron donors/acceptors. Furthermore, the MOF can also show discriminative ET chemochromic response to different sizes and shapes of organic amines, which can be potentially used for the visual detection of electron-rich organic amines, especially n-butylamine (n-BUA).

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Cu-MOF Material Constructed with a Triazine Polycarboxylate Skeleton: Multifunctional Identify and Microdetecting of the Aromatic Diamine Family (o,m,p-Phenylenediamine) Based on the Luminescent Response

Organic aromatic amines are widely used in various fields such as pharmaceuticals, pesticides, dyes, and tobacco smoke. The pollution of organic amines has become a problem that cannot be ignored, due to the extensive harmful effects on the environment and public health, which has become one of the most concerned frontier fields in the world. Identifying and microdetecting o-phenylenediamine (OPD), m-phenylenediamine (MPD), and p-phenylenediamine (PPD) using MOFs have rarely been reported. On the basis of the blue emission properties of Cu-TBDA constructed with 5,5'-((6-chloro-1,3,5-triazine-2,4-diyl)bis(azanediyl))diisophthalic acid (H₄TBDA) ligand, Cu-TBDA was studied primarily to identify and detect aromatic diamine family as a multifunctional chemical sensor. Interestingly, Cu-TBDA has a very high selectivity and sensitivity to OPD and MPD with a low limit of detection (5.00 μM for OPD and 1.77 μM for MPD). Especially for OPD, Cu-TBDA has a unique switching function for it. When the concentration of OPD is less than 9.1 × 10^-4 M, the fluorescence response of Cu-TBDA suspension exhibit enhanced. However, when the concentration of OPD is more than 9.1 × 10^-4 M, the emission intensity displays quenching phenomenon. Therefore, Cu-TBDA as a chemical sensor not only has recognition and detection functions for organic aromatic amines but also first exhibits turn-on and -off sensing behavior toward OPD.

A new ESIPT-based fluorescent probe for the highly sensitive detection of amine vapors

A new ESIPT-based fluorescent probe has been developed as a rapid, highly sensitive, and selective sensor for amine vapors.

Detection of organic amines using a ratiometric chromophoric fluorescent probe with a significant emission shift

Taking advantages of both the well-known α,β-unsaturated structure and the special nucleophilicity of organic amines toward its acceptor moieties, intramolecular charge transfer as a signaling mechanism is used to design and synthesize a new ratiometric chromophoric fluorescent probe (BI-CA-ID) with large emission shifts toward organic amines. This probe is employed for the detection of organic amines with high selectivity and sensitivity and a “naked-eye” color change (from red to colorless). Ultraviolet–visible and fluorescence spectrometric measurements are used to determine detection limits as low as 0.024 and 0.43 μM. Furthermore, nucleophilic addition of the amine on the α,β-unsaturated of BI-CA-ID indicated that the sensing mechanism occurs via interruption of the π-conjugation.

Double-detecting fluorescent sensor for ATP based on Cu2+ and Zn2+ response of hydrazono-bis-tetraphenylethylene

Although all kinds of sensors with unique detecting ability for one guest were reported, the fluorescence sensor with multiple detecting abilities was seldom presented. This work designed and synthesized a novel AIE fluorescence probe bearing double detecting for ATP based on Cu²⁺ and Zn²⁺ response of hydrazono-bis-tetraphenylethylene (Bis-TPE). Bis-TPE was prepared in 82% yield with simple procedure. It exhibited strong red AIE fluorescence based on the large conjugated electron effect in aqueous media. It showed outstanding selective sensing abilities for Cu²⁺ by strong fluorescence quenching and for Zn²⁺ by red-orange fluorescence change. The sensing mechanism of 1:1 stoichiometric ratios was confirmed by ¹H NMR and MS study. The strong red fluorescence of Bis-TPE + Cu²⁺ system could be recovered by adding ATP. The orange fluorescence of Bis-TPE + Zn²⁺ system could be quenched by adding Cu²⁺ and then was recovered by adding ATP. These double detecting abilities for ATP with the "off-on" red fluorescence in Bis-TPE + Cu²⁺ system and "allochroic-off-on" orange fluorescence in Bis-TPE + Zn²⁺+Cu²⁺ system were successfully applied to test Cu²⁺, Zn²⁺ and ATP in test paper and living cell imaging, displaying the good application prospects for sensing Cu²⁺, Zn²⁺ and double detecting ATP in the complicated environment.

A multifunctional photochromic metal–organic framework with Lewis acid sites for selective amine and anion sensing

A bipyridinium-based MOF was prepared, which exhibits reversible photochromic properties, good luminescence sensing ability for Cr₂O₇²⁻, and can be considered an excellent colorimetric sensor for the selective detection of amine vapors.

(Tetrahydrodibenzo[a,i]phenanthridin-5-yl)phenol as a Fluorescent Probe for the Detection of Aniline

Two (tetrahydrodibenzo[a,i]phenanthridin-5-yl)phenols that differ in their substituents at the para position (P1, R = H and P2, R = NEt₂) were designed and synthesized. The presence of a -NEt₂ group in probe P2 facilitates the twisted intramolecular charge transfer (TICT) process, making P2 emissive, which distinctly coordinated with boron trifluoride in the presence of different amines with different electronic properties. A substantial increase in emission intensity with increasing viscosity of the surrounding environment and smooth formation of a planar complex with boron and Zn²⁺ ions concluded the presence of a TICT process. The selective reactivity of P2 toward a tetracoordinated boron complex has been explored as a potential tool for colorimetric and fluorescent discrimination of aromatic primary amines, i.e., anilines. Selective detection of aniline with probe P2 can be viewed through the naked eye, and the corresponding fluorescence turn-on detection limit was found to be 12.65 nM. In addition, the detection of aniline on precoated aluminum-backed thin-layer chromatography plates and Whatman filter paper strips was found to be in good agreement with the color change of P2 in solution and in vapor phase.

A dual-model SERS and RRS analytical platform for Pb(II) based on Ag-doped carbon dot catalytic amplification and aptamer regulation

Several carbon dots doping with diferent elements (Ca, Ag, Au) were fabricated and their catalytic properties had been investigated in this paper. It was found that the Ag-doped carbon dots (CDAg) had played a role of mimic enzyme on the reaction of HAuCl4-H2O2 and generated nanogold particles with surface enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects. The aptamer (Apt) can be adsorbed on the CDAg surface and cause the catalysis weakening. When the target Pb(II) was added, it would combine with the Apt to produce firm complexes Pb-Apt and desorb CDAg, which caused its catalytic effect restore. The formed nanogold had a strong RRS peak (at 375 nm) and a high SERS peak (at 1615 cm-1) in the presence of molecular probe (Victoria blue B, VBB). The dual-model signals of SERS and RRS increased linearly with Pb(II) concentration increase within the scope of 0.006-0.46 μmol/L and 0.01-0.46 μmol/L. And their detection limits respectively were 0.0032 μmol/L and 0.0048 μmol/L Pb(II).

A fluorescent sensor based on aggregation-induced emission: highly sensitive detection of hydrazine and its application in living cell imaging

Aggregation-induced emission (AIE) molecules eliminate the aggregation-caused quenching (ACQ) phenomenon effectively and exhibit excellent properties of a fluorescent sensor in the aggregated state. In this paper, an allochroic fluorescent sensor based on AIE molecules with a diphenylacrylonitrile structure was prepared in high yield by a simple procedure. This molecule possessed good AIE properties and exhibited a sensitive sensor ability for aliphatic amines with an obvious color change from orange to blue-green. The detailed investigation on the detection of hydrazine suggested that the detection limit for hydrazine was 3.67 × 10-6 M, and the highly sensitive sensor for hydrazine was not influenced by other species. The sensor mechanism was confirmed by using 1H NMR and MS spectra. The sensor for hydrazine was successfully applied in a test paper, exhibiting good practical application potential for detecting hydrazine. The experiment of living cell imaging suggested that this sensor showed superior bioimaging performance and presented sensitive detection for hydrazine with an obvious color change from orange to blue-green.

Ammonia-Responsive Luminescence of Ln3+-β-diketonate Complex Encapsulated within Zeolite Y

Assembling Ln³⁺(HPBA_n) (Ln = Eu or Tb, HPBA = N-(2-pyridinyl)benzoylacetamide) in the cavities of zeolite Y (ZY) via the “ship-in-a-bottle” strategy leads to the formation of novel luminescent composite, Ln(HPBA_n)@ZY, whose luminescence can be easily modulated by ammonia on the basis of the energy level variation of HPBA after deprotonation process. Additionally the bimetallic complex doping sample, Eu_0.5Tb_0.5(HPBA_n)@ZY, show great potential as self-referencing luminescent sensor for detecting low ammonia concentration of 10⁻¹²–0.25 wt%.

A novel photochromic metal-organic framework with good anion and amine sensing

A novel metal-organic hybrid photochromic compound [Zn (CV) (L2)]·2H2O (1) (CV = N,N'-4,4'-bipyridiniodipropionate, H2L2 = isophthalic acid) has been synthesized solvothermally. Compound 1 features a two-dimensional (2D) framework structure, exhibiting photochromic properties under sunlight and UV irradiation with an obvious color change from colorless to dark blue. Meanwhile, the luminescence properties of 1 were investigated, and the results suggested that 1 has good properties of detecting dichromate ions. Furthermore, compound 1 shows different color changes when exposed to different alkyl-amines, and 1 can also be deposited into paper to use as portable test strips. This work can be applied to practical applications as a multifunctional detector against light and chemicals.

3D LnIII-MOFs: displaying slow magnetic relaxation and highly sensitive luminescence sensing of alkylamines

Six isomorphous Ln-based MOFs with 3D structures have been synthesized under solvothermal conditions. Dy-MOF (5) shows slow magnetic relaxation behaviors. Eu-MOF (3) can serve as a recyclable sensor towards alkylamines in water systems.

Fingerprint Detection and Differentiation of Gas-phase Amines Using a Fluorescent Sensor Array Assembled from Asymmetric Perylene Diimides

A series of structurally analogous PDIs were fabricated and used as fluorescent sensor arrays. Adjustment of the molecular electron-donating ability and polarity (i.e., chemical structure) was found to greatly influence the fluorescent quenching by different types of amines. Moreover, the sensor array displayed high sensitivity to amine vapors and allowed the fingerprint differentiation of different species.

AIEE Active Donor-Acceptor-Donor-Based Hexaphenylbenzene Probe for Recognition of Aliphatic and Aromatic Amines

In the present investigation, an intramolecular charge transfer (ICT) and aggregation induced emission enhancement (AIEE) active donor-acceptor-donor (D-A-D) system 5 having fumaronitrile as the acceptor and hexaphenylbenzene (HPB) as the donor moieties joined through rotatable phenyl rings has been designed and synthesized that is highly emissive in the solid state and exhibits stimuli-responsive reversible piezochromic behavior upon grinding and heating. Because of its AIEE characteristics, HPB derivative 5 undergoes aggregation to form fluorescent aggregates in mixed aqueous media that exhibit ratiometric fluorescence response toward aliphatic amines (primary/secondary/tertiary) and turn-off response toward aromatic amines and hence differentiates between them. Further, the solution-coated portable paper strips of derivative 5 showed pronounced and sensitive response toward aromatic and aliphatic amines with a detection limit in the range of picogram and nanogram level, respectively.

Differentiable Detection of Volatile Amines with a Viologen-Derived Metal-Organic Material

The development of selective sensing materials for amine detection has received considerable attentions because amines have high toxicity and exist widely. In this article, we demonstrate for the first time that a degree of discriminative detection of alkylamines can be achieved by a metal-organic coordination material. The material is derived from Cd^II and 4,4'-bipyridinium-1,1'-bis(phenylene-3-carboxylate), shows 1D channels lined with electron-deficient viologen chromophores, and exhibits different colors upon contact with amine vapors of different molecular sizes and types (primary, secondary, and tertiary). The vapochromism is attributable to electron transfer from the amine group to viologen. The discrimination between amines is because the analyte-receptor interactions, which either directly mediate or indirectly affect electron transfer, are influenced by the number of the N-H bonds in the amine molecule, the size of the amine molecule relative to the receptor channel and the steric hindrance for the electron donor-acceptor contacts. The material also shows reversible photo- and hydrochromism owing to stimuli-induced reversible electron transfer. The compound can be deposited in paper simply by spraying the mixture solution of the starting metal salt and the ligand. The paper can be used as portable test strips for visual and differentiable detection of amines and as erasable inkless printing medium.

Reconsideration of the Zincke salt: An efficient colorimetric chemosensor for detection of ethylamines

In this work, an efficient colorimetric chemosensor for the detection of ethylamines using a pyridinium salt (the Zincke salt) is reported. Highly sensitive and selective reactivity of the Zincke salt enables colorimetric response of the Zincke salt solution to the ethylamines by showing well-defined visible color changes from colorless to the deep red. Furthermore, the Zincke salt thin film exhibits discernable color changes in response to ethylamine gas as well, which allows fabrication of simple, fast and portable strip- and textile-type ethylamine sensors.

Fluorescent β-ketothiolester boron complex: substitution based “turn-off” or “ratiometric” sensor for diamine

Boron diketonate 3 provides a choice of turn-off or ratiometric detection of diamine with respect to substitution on the boron-chelating ring. Detection of the diamine involves a substitution reaction by elimination of a methylsulfanyl group, favouring selective detection of diamine.

Fluorescence Quenching of a Conjugated Polymer by Synergistic Amine-Carboxylic Acid and π-π Interactions for Selective Detection of Aromatic Amines in Aqueous Solution

Fluorescence sensing of amine in aqueous solution is challenging. The various basicity and chemical structures of amines may lead to poor selectivity in aqueous solution, and selective fluorescence detection of primary aromatic amine is rarely reported. This paper presents design and synthesis of a fluorescent conjugated polymer for rapid and selective sensing of aromatic amines in aqueous solution. The fluorescent conjugated polymer, poly[fluorenyl-alt-p-phenyleneethynylene] with pendant carboxylic acid groups and long alky chains, is synthesized via palladium-catalyzed Sonogashira coupling reaction. The fluorescence of the polymer is selectively quenched by the aromatic amines in aqueous solution, whereas the aliphatic amines enhance the fluorescence of the polymer. The high selectivity to the aromatic amines, particularly to the environmentally important p-phenylenediamine, likely originates from the amplified π-π fluorescence quenching synergized by amine and carboxylic acid interaction. Our results demonstrate an effective material design strategy that may be extended to fluorescence sensing of other aromatic compounds.

Dimalononitrile-containing probe based on aggregation-enhanced emission features for the multi-mode fluorescence detection of volatile amines

A novel multi-mode probe consisting of a hexaphenyl-1,3-butadiene derivative, 2,2′-((((1Z,3Z)-1,2,3,4-tetraphenylbuta-1,3-diene-1,4-diyl)bis(4,1-phenylene))bis(methanylylidene))dimalononitrile (ZZ–HPB–CN), with typical aggregation-enhanced emission (AEE) features was easily prepared for the highly sensitive and rapid detection of amine vapors. The ZZ–HPB–CN sensor, which was prepared by simply depositing ZZ–HPB–CN on filter paper, could detect low concentration vapors of volatile amines using fluorescence, ultraviolet and naked-eye detection. The limit of detection of the sensor was as low as 1 ppb for the fluorescence detection. The color change of the sensor caused by 1–10 ppm amine vapors could be observed under UV light or with the naked eye. The high sensitivity, quick response and easy operation of the probe give it great potential for real-life applications.

Morphological Transformation between Nanocoils and Nanoribbons via Defragmentation Structural Rearrangement or Fragmentation-recombination Mechanism

Kinetic control over the assembly pathways towards novel metastable functional materials or far-from-equilibrium systems has been much less studied compared to the thermodynamic equilibrium self-assembly. Herein, we report the distinct morphological transformation between nanocoils and nanoribbons in the self-assembly of unsymmetric perylene diimide (PDI) molecules. We demonstrate that the morphological transformation of the kinetically trapped assemblies into the thermodynamically stable forms proceeds via two distinct mechanisms, i.e., a direct structural rearrangement (molecule 1 or 2) and a fragmentation-recombination mechanism (molecule 4), respectively. The subtle interplay of the steric hindrance of the bulky substituents and the flexibility of the linker structure between the bulky moiety and the perylene core was demonstrated to enable the effective modulation of the energetic landscape of the assemblies and thus modulation of the assembly pathways. Herein, our work presents a new approach to control the self-assembly pathways and thereby can be used to achieve novel far-from-equilibrium systems.