Activated Ni-O-Ir Enhanced Electron Transfer for Boosting Oxygen Evolution Reaction Activity of LaNi1-x Irx O3

Tuning the structure of the active center of catalysts to atomic level provides the most efficient utilization of the active component, which plays an especially important role for precious metals. In this study, the liquid phase ion exchange method is used to introduce atomic Ir into LaNiO₃ perovskite oxide, which shows excellent catalytic performance in the oxygen evolution reaction (OER). The catalyst, LaNi_0.96 Ir_0.04 O₃ , with the optimal concentration of Ir, displays an overpotential of just 280 mV at 10 mA cm^-2 . The introduced Ir enriches the surface electron density significantly, which not only improves site-to-site electron transfer between O and Ni sites but also allows stable adsorption of the intermediates. The results of cyclic voltammetry tests reveal the superior overpotential and remarkable efficiency of the OER process because of the strong interactions in Ni-O-Ir. Moreover, the Ir atom inhibits the participation of a lattice oxygen oxidation mechanism (LOM) in LaNiO₃ that guarantees the stability of the catalyst in alkaline conditions. It is anticipated that this work will be instrumental for the preparation and study of a broad range of atomic metal-doped perovskite oxides for water splitting.

One-pot production of a sea urchin-like alloy electrocatalyst for the oxygen electro-reduction reaction

Designing a cost-effective catalyst with high performance towards the oxygen electro-oxidation reaction (ORR) is of great interest for the development of green energy storage and conversion technologies. We report herein a facile self-assembly strategy in a mild reducing environment to realize an urchin-like NiPt bimetallic alloy with the domination of the (111) facets as an efficient ORR electrocatalyst. In the rotating-disk electrode test, the as-obtained NiPt nanourchins (NUCs)/C catalyst demonstrates an increase in both onset potential (0.96 V_RHE) and half-wave potential (0.92 V_RHE) and a direct four-electron ORR pathway with enhanced reaction kinetics. Additionally, the as-made NiPt NUCs/C electrocatalyst also shows impressive ORR catalytic stability compared to a commercial Pt NPs/C catalyst after an accelerated durability test with 15.29% degradation in mass activity, which is 3.04-times lower than 46.48% of the Pt NPs/C catalyst. The great ORR performance of the as-made catalyst is due to its unique urchin-like morphology with the dominant (111) facets and the synergistic and electronic effects of alloying Ni and Pt. This study not only provides a robust ORR electrocatalyst, but also opens a facile but effective route for fabricating 3D Pt-based binary and ternary alloy catalysts.

A review of the role and mechanism of surfactants in the morphology control of metal nanoparticles

Although great progress has been made in the synthesis of metal nanoparticles, good repeatability and accurate predictability are still difficult to achieve. This difficulty can be attributed to the synthetic method based primarily on observation and subjective experience, and the role of many surfactants remains unclear. It should be noted that surfactants play an important role in the synthetic process. Understanding their function and mechanism in the synthetic process is a prerequisite for the rational design of nanocatalysts with ideal morphology and performance. In this review article, the function of surfactants is introduced first, and then the mechanism of action of surfactants in controlling the morphology of nanoparticles is discussed according to the types of surfactants, and the promoting and sealing effects of surfactants on the crystal surface is revealed. The relationship between surfactants and the morphology structure of nanoparticles is studied. The removal methods of surfactants are discussed, and the existing problems in the current development strategy are summarized. Finally, the application of surfactants in controlling the morphology of metal nanocrystals is prospected. It is hoped that the review can open up new avenues for the synthesis of nanocrystals.

Modern Chemical Routes for the Controlled Synthesis of Anisotropic Bimetallic Nanostructures and Their Application in Catalysis

Bimetallic nanoparticles (BNPs) have attracted greater attention compared to its monometallic counterpart because of their chemical/physical properties. The BNPs have a wide range of applications in the fields of health, energy, water, and environment. These properties could be tuned with a number of parameters such as compositions of the bimetallic systems, their preparation method, and morphology. Monodisperse and anisotropic BNPs have gained considerable interest and numerous efforts have been made for the controlled synthesis of bimetallic nanostructures (BNS) of different sizes and shapes. This review offers a brief summary of the various synthetic routes adopted for the synthesis of Palladium(Pd), Platinum(Pt), Nickel(Ni), Gold(Au), Silver(Ag), Iron(Fe), Cobalt(Co), Rhodium(Rh), and Copper(Cu) based transition metal bimetallic anisotropic nanostructures, growth mechanisms e.g., seed mediated co-reduction, hydrothermal, galvanic replacement reactions, and antigalvanic reaction, and their application in the field of catalysis. The effect of surfactant, reducing agent, metal precursors ratio, pH, and reaction temperature for the synthesis of anisotropic nanostructures has been explained with examples. This review further discusses how slight modifications in one of the parameters could alter the growth mechanism, resulting in different anisotropic nanostructures which highly influence the catalytic activity. The progress or modification implied in the synthesis techniques within recent years is focused on in this article. Furthermore, this article discussed the improved activity, stability, and catalytic performance of BNS compared to the monometallic performance. The synthetic strategies reported here established a deeper understanding of the mechanisms and development of sophisticated and controlled BNS for widespread application.

3D ordered macro-/mesoporous carbon supported Ag nanoparticles for efficient electrocatalytic oxygen reduction reaction

Three-dimensionally ordered macro-/mesoporous carbon (OMMC)-supported Ag nanoparticles (Ag/OMMC) with homogeneously dispersed Ag particles are prepared and investigated as effective electrocatalysts for oxygen reduction reaction (ORR) in alkaline aqueous system. The obtained Ag/OMMC catalyst displays smaller Ag particle size, higher Ag dispersion, and enhanced catalytic activity and durability compared with the carbon black Vulcan XC-72R supported Ag (Ag/XC-72R). The sizes of Ag particles supported on the OMMC and XC-72R are 4.3 and 6.5 nm, respectively. The prepared Ag/OMMC catalyst shows a positive half-wave potential of 0.79 V vs. RHE and a large diffusion-limited current of 5.6 mA cm^-2 at 0.4 V, superior to Ag/XC-72R catalyst. The better ORR performance of the Ag/OMMC is probably ascribed to the unique 3D ordered interconnected macro-/mesoporous structure, which contributes to facilitating the mass/charge transport, improving the Ag particle dispersion, and preventing the Ag particle growth and aggregation.

One-step electrodeposition of AuNi nanodendrite arrays as photoelectrochemical biosensors for glucose and hydrogen peroxide detection

A novel nonsemiconductor photoelectrochemical biosensor was first constructed using the unique plasmonic AuNi nanodendrite arrays. The AuNi nanodendrite arrays were rapidly prepared by a one-step electrodeposition method using the porous anodic aluminum templates. Owing to its hierarchical structure with abundant active sites, the synergistic catalytic of Au and Ni can be better exploited. These plasmonic AuNi nanodendrite arrays display exceptional photoelectrocatalytic activities for glucose oxidation and hydrogen peroxide reduction reaction under visible light illumination. Specifically, the detection sensitivity for glucose (3.7277 mA mM^-1 cm^-2) under illumination is about 3.3 folds improvement than in the dark (1.1287 mA mM^-1 cm^-2), together with high accuracy and low detection limit of 3 μM. The markedly enhanced performance of AuNi nanodendrite arrays can be attributed to its hierarchical structure with abundant active sites and plasmonic effect of Au with strong absorption band in visible region. Such a newly developed method via the facile and low-cost route is of great significance in designing the plasmon-aided photoelectrochemical biosensors.

Galvanic replacement of liquid metal galinstan with Pt for the synthesis of electrocatalytically active nanomaterials

The galvanic replacement reaction is a verstile method for the fabrication of bimetallic nanomaterials which is usually limited to solid precursors. Here we report on the galvanic replacement of liquid metal galinstan with Pt which predominantly results in the formation of a Pt5Ga1 material. During the galvanic replacement process an interesting phenomenon was observed whereby a plume of nanomaterial is ejected upwards from the centre of the liquid metal droplet into solution which is due to surface tension gradients on the liquid metal surface that induces surface convection. It was also found that hydrogen gas was liberated during the process facilitated by the formation of the Pt rich nanomaterial which is a highly effective catalyst for the hydrogen evolution reaction (HER). The material was characterised by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction and dynamic light scattering measurements. It was found that Pt5Ga1 was highly effective for the electrochemical oxidation of methanol and ethanol and outperformed a commercial Pt/C catalyst. Density functional theory calculations confirmed that the increased activity is due to the anti poisoning properties of the surface towards CO upon the incorporation of Ga atoms into a Pt catalyst. The use of liquid metals and galvanic replacement offers a simple approach to fabricating Ga based alloy nanomaterials that may have use in many other types of applications.

The in situ etching assisted synthesis of Pt-Fe-Mn ternary alloys with high-index facets as efficient catalysts for electro-oxidation reactions

Pt-Based alloys enclosed with high-index facets (HIFs) generally show much higher specific catalytic activities than their counterparts with low-index facets in electro-catalytic reactions. However, the exposure of a certain Pt surface would require a well-defined nanostructure, which usually can only be obtained at larger sizes. Therefore, a low dispersion of Pt atoms in Pt-based alloys with HIFs would affect the atomic utilization of Pt, resulting in most of these Pt-based alloys exhibiting lower mass activity than commercial Pt/C and Pt black catalysts for electro-catalytic reactions. Herein, we address a novel strategy to divide the surface areas of larger sized nanocrystals into small surface area nanocrystals by in situ etching Pt-Fe-Mn concave cubes (CNCs) while maintaining the morphology of the Pt-Fe-Mn alloys to improve the utilization of Pt atoms and thus increase the mass activity. Remarkably, the Pt-Fe-Mn unique concave cube (UCNC) nanocrystals (NCs) showed much higher specific and mass activities toward the methanol oxidation reaction (MOR) than the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The kinetic analysis from Tafel plots indicated that UCNC Pt-Fe-Mn NCs had the lowest Tafel slope at whole potentials and the splitting of the first C-H bond of a CH3OH molecule with the first electron transfer was the rate-determining step at high potentials (above 0.45 V). In situ Fourier transform infrared reflection (FTIR) spectroscopic investigation at the molecular level indicated that methanol chemical absorption took place at a low potential of -0.2 V at the UCNC NC electrode. Meanwhile, much higher CO2 productivity was observed at the UCNC NC electrode, indicating the strong anti-poisoning ability of the UCNC Pt-Fe-Mn NCs during methanol electrooxidation. Furthermore, in the formic acid oxidation (FAOR) test, the activity and long-term durability of the Pt-Fe-Mn UCNC NCs were also found to be superior to those of the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The enhanced catalytic performance in both the MOR and FAOR is most probably due to the unique HIF structure consisting of small sized particles, enhanced Pt utilization, the richness of crystalline defects and synergetic effects of Pt, Fe, and Mn metals. Our present work provides an insight into the rational design of Pt based alloys with HIFs to improve the catalytic performance of electro-catalytic reactions for fundamental study.

Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting

Water-based renewable energy cycle involved in water splitting, fuel cells, and metal-air batteries has been gaining increasing attention for sustainable generation and storage of energy. The major challenges in these technologies arise due to the poor kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reactions (OER), besides the high cost of the catalysts. Attempts to address these issues have led to the development of many novel and inexpensive catalysts as well as newer mechanistic insights, particularly so in the last three-four years when more catalysts have been investigated than ever before. With the growing emphasis on bifunctionality, that is, materials that can facilitate both reduction and evolution of oxygen, this review is intended to discuss all major families of ORR, OER, and bifunctional catalysts such as metals, alloys, oxides, other chalcogenides, pnictides, and metal-free materials developed during this period in a single platform, while also directing the readers to specific and detailed review articles dealing with each family. In addition, each section highlights the latest theoretical and experimental insights that may further improve ORR/OER performances. The bifunctional catalysts being sufficiently new, no consensus appears to have emerged about the efficiencies. Therefore, a statistical analysis of their performances by considering nearly all literature reports that have appeared in this period is presented. The current challenges in rational design of these catalysts as well as probable strategies to improve their performances are presented.

Melamine-assisted solvothermal synthesis of PtNi nanodentrites as highly efficient and durable electrocatalyst for hydrogen evolution reaction

Rational design of highly efficient and durable electrocatalysts for hydrogen evolution reaction (HER) is of prime importance for renewable and sustainable energy. Herein, PtNi nanodentrites (PtNi NDs) were facilely synthesized in oleylamine (OAm) by a one-pot solvothermal method, using melamine and cetyltrimethylammonium chloride (CTAC) as co-structure-directing agents. The obtained catalyst showed superior catalytic activity and enhanced durability for HER relative to commercial Pt/C, home-made PtNi₃ nanocrystals (NCs) and Pt₃Ni NCs both in alkaline and acidic media. The enhanced HER activities are attributed to bimetallic synergies and interface structures in PtNi NDs. This work provides an effective strategy to prepare highly efficient and durable electrocatalysts for HER.

Facile synthesis of urchin-like RuCu and hollow RuCuMo nanoparticles and preliminary insight to their formation process by cyclic voltammetry

Urchin-like RuCu nanoparticles and hollow RuCuMo nanoparticles were prepared by a one-pot chemical reduction method. The nanoparticles were characterized by EDX, HRTEM, XPS and ICP-AES. By combining cyclic voltammetry and TEM, the formation process of nanoparticles was obtained. The urchin-like RuCu nanoparticles are proved to be formed via underpotential deposition mechanism and the formation of ternary nanoparticles RuCuMo was due to the replacement of Cu with Ru and the interception of Mo gradually. It was found that the formation of different morphology is depended on the precursors in the reaction system and their reduction sequences. Compared to previously reported multi-step synthetic routes, the developed method here is much simpler.

Synthesis of Pt-Pd Bimetallic Porous Nanostructures as Electrocatalysts for the Methanol Oxidation Reaction

Pt-based bimetallic nanostructures have attracted a great deal of attention due to their unique nanostructures and excellent catalytic properties. In this study, we prepared porous Pt–Pd nanoparticles using an efficient, one-pot co-reduction process without using any templates or toxic reactants. In this process, Pt–Pd nanoparticles with different nanostructures were obtained by adjusting the temperature and ratio of the two precursors; and their catalytic properties for the oxidation of methanol were studied. The porous Pt–Pd nanostructures showed better electrocatalytic activity for the oxidation of methanol with a higher current density (0.67 mA/cm²), compared with the commercial Pt/C catalyst (0.31 mA/cm²). This method provides one easy pathway to economically prepare different alloy nanostructures for various applications.

Self-Assembled Dendritic Pt Nanostructure with High-Index Facets as Highly Active and Durable Electrocatalyst for Oxygen Reduction

The durability issues of Pt catalyst should be resolved for the commercialization of proton exchange membrane fuel cells. Nanocrystal structures with high-index facets have been recently explored to solve the critical durability problem of fuel cell catalysts as Pt catalysts with high-index facets can preserve the ordered surfaces without change of the original structures. However, it is very difficult to develop effective and practical synthetic methods for Pt-based nanostructures with high-index facets. The current study describes a simple one-pot synthesis of self-assembled dendritic Pt nanostructures with electrochemically active and stable high-index facets. Pt nanodendrites exhibited 2 times higher ORR activity and superior durability (only 3.0 % activity loss after 10 000 potential cycles) than a commercial Pt/C. The enhanced catalytic performance was elucidated by the formation of well-organized dendritic structures with plenty of reactive interfaces among 5 nm-sized Pt particles and the coexistence of low- and high-index facets on the particles.

Facile Synthesis of Porous Dendritic Bimetallic Platinum-Nickel Nanocrystals as Efficient Catalysts for the Oxygen Reduction Reaction

Certain bimetallic nanocrystals (NCs) possess promising catalytic properties for electrochemical energy conversion. Herein, we report a facile method for the one-step synthesis of porous dendritic PtNi NCs in aqueous solution at room temperature that contrasts with the traditional multistep thermal decomposition approach. The dendritic PtNi NCs assembled by interconnected arms are efficient catalysts for the oxygen reduction reaction. This direct and efficient method is favorable for the up-scaled synthesis of active catalysts used in electrochemical applications.

One-Pot and Facile Fabrication of Hierarchical Branched Pt-Cu Nanoparticles as Excellent Electrocatalysts for Direct Methanol Fuel Cells

Hierarchical branched nanoparticles are one promising nanostructure with three-dimensional open porous structure composed of integrated branches for superior catalysis. We have successfully synthesized Pt-Cu hierarchical branched nanoparticles (HBNDs) with small size of about 30 nm and composed of integrated ultrathin branches by using a modified polyol process with introduction of poly(vinylpyrrolidone) and HCl. This strategy is expected to be a general strategy to prepare various metallic nanostructures for catalysis. Because of the special open porous structure, the as-prepared Pt-Cu HBNDs exhibit greatly enhanced specific activity toward the methanol oxidation reaction as much as 2.5 and 1.7 times compared with that of the commercial Pt-Ru and Pt-Ru/C catalysts, respectively. Therefore, they are potentially applicable as electrocatalysts for direct methanol fuel cells.

Silver nanoparticles supported on a nitrogen-doped graphene aerogel composite catalyst for an oxygen reduction reaction in aluminum air batteries

A facile one-step hydrothermal method to prepare the Ag/N-RGO composite as an efficient ORR electrocatalyst.