Sulfide-Induced Dimerization Versus Demetallation of Tricopper(I) Clusters Protected by Tris-Thiolato Metalloligands

Here, we report the reactivity of copper(I) clusters toward sulfide ions; these sulfide copper(I) clusters have attracted much attention due to their relevance to biologically active centers and their fascinating structural and photophysical properties. Treatment of the CuI 3RhIII 2 pentanuclear complex, [Cu3{Rh(aet)3}2]3+ (aet=2-aminoethanethiolate), in which a {CuI 3}3+ cluster moiety is bound by two fac-[Rh(aet)3] metalloligands, with NaSH in water produced the CuI 6RhIII 4 decanuclear complex, [Cu6S{Rh(aet)3}4]4+, accompanied by the dimerization of [Cu3{Rh(aet)3}2]3+ and the incorporation of a sulfide ion at the center. While similar treatment using the analogous CuI 3IrIII 2 complex with fac-[Ir(aet)3] metalloligands, [Cu3{Ir(aet)3}2]3+, produced the isostructural CuI 6IrIII 4 decanuclear complex, [Cu6S{Ir(aet)3}4]4+, the use of the CuI 3RhIII 2 complex with fac-[Rh(apt)3] metalloligands, [Cu3{Rh(apt)3}2]3+ (apt=3-aminopropanethiolate), resulted in the removal of one of the three CuI atoms from {CuI 3}3+ to afford the CuI 2RhIII 2 tetranuclear complex, [Cu2{Rh(apt)3}2]2+.

Engineering of copper sulfide mediated by phototherapy performance

Copper sulfide based phototherapy, including photothermal therapy and photodynamic therapy, is an emerging minimally invasive treatment of tumor, which the light was converted to heat or reactive oxygen to kill the tumor cells. Compared with conventional chemotherapy and radiation therapy, Cu2-x S based phototherapy is more efficient and has fewer side effects. However, considering the dose-dependent toxicity of Cu2-x S, the performance of Cu2-x S based phototherapy still cannot meet the requirement of the clinical application to now. To overcome this limitation, engineering of Cu2-x S to improve the phototherapy performance by increasing light absorption has attracted extensive attention. For better guidance of Cu2-x S engineering, we outline the currently engineering method being explored, including (1) structural engineering, (2) compositional engineering, (3) functional engineering, and (4) performance engineering. Also, the relationship between the engineering method and phototherapy performance was discussed in this review. In addition, the further development of Cu2-x S based phototherapy is prospected, including smart materials based phototherapy, phototherapy induced immune microenvironment modulation et al. This review will provide new ideas and opportunities for engineering of Cu2-x S with better phototherapy performance. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Facile Synthesis of Needle-like Copper Sulfide Structures as an Effective Electrochemical Sensor Material for Neurotransmitter Detection in Biological Samples

Electrochemical sensors, due to their excellent and unique features, are of high interest nowadays for the detection and monitoring of several biological compounds. In such a case, serotonin (SRN), an important neurotransmitter, was herein studied for its detection in biological fluids since its presence is more crucial to be monitored and detected in clinical and medical applications. Several study strategies have been used to determine the chemical and physical properties. The crystalline size of the constructed copper sulfide (Cu2S) material was measured to be 25.92 nm. The Cu2S was fabricated over the working surface and further analyzed for several sensor parameters to be optimized. The charge transfer resistance of the copper sulfide-modified glassy carbon electrode (Cu2S/GCE) was determined to be about 277.0 Ω. With the linear range from about 0.029 μM to 607.6 μM for SRN, the limit of detection (LOD) was calculated as 3.2 nM, with a good sensitivity of 13.23 μA μM-1 cm2. The sensor experienced excellent repeatability, reproducibility, and long-term stability. The fabricated electrode was selective with the presence of different interfering compounds. The real sample analysis, as determined with the regular addition method with human serum and urine samples, revealed a good recovery percentage. Thus, the employed fabricated electrode material will be highly effective in sensing other analytes of choice.

A robust Au@Cu2-xS nanoreactor assembled by silk fibroin for enhanced intratumoral glucose depletion and redox dyshomeostasis

Intracellular redox dyshomeostasis promoted by tumor microenvironment (TME) modulation has become an appealing therapeutic target for cancer management. Herein, a dual plasmonic Au/SF@Cu_2-xS nanoreactor (abbreviation as ASC) is elaborately developed by covalent immobilization of sulfur defective Cu_2-xS nanodots onto the surface of silk fibroin (SF)-capped Au nanoparticles. Tumor hypoxia can be effectively alleviated by ASC-mediated local oxygenation, owing to the newfound catalase-mimic activity of Cu_2-xS. The semiconductor of Cu_2-xS with narrow bandgap energy of 2.54 eV enables a more rapid dissociation of electron-hole (e^-/h⁺) pair for a promoted US-triggered singlet oxygen (¹O₂) generation, in the presence of Au as electron scavenger. Moreover, Cu_2-xS is devote to Fenton-like reaction to catalyze H₂O₂ into ·OH under mild acidity and simultaneously deplete glutathione to aggravate intracellular oxidative stress. In another aspect, Au nanoparticles with glucose oxidase-mimic activity consumes intrinsic glucose, which contributes to a higher degree of oxidative damage and energy exhaustion of cancer cells. Importantly, such tumor starvation and ¹O₂ yield can be enhanced by Cu_2-xS-catalyzed O₂ self-replenishment in H₂O₂-rich TME. ASC-initiated M1 macrophage activation and therapy-triggered immunogenetic cell death (ICD) favors the systematic tumor elimination by eliciting antitumor immunity. This study undoubtedly enriches the rational design of SF-based nanocatalysts for medical utilizations.

Mechanochemical synthesis of non-stoichiometric copper sulfide Cu1.8S applicable as a photocatalyst and antibacterial agent and synthesis scalability verification

An effort to prepare different non-stoichiometric Cu_xS_y compounds starting from elemental precursors using mechanochemistry was made in this study. However, out of the 7 stoichiometries tested, it was only possible to obtain three phases: covellite CuS, chalcocite Cu₂S and digenite Cu_1.8S and their mixtures. To obtain the digenite phase with the highest purity, the Cu : S stoichiometric ratio needed to be fixed at 1.6 : 1. The reaction between copper and sulfur was completed within a second range, however, milling was performed for up to 15 minutes until the equilibrium in phase composition between digenite and covellite was reached. The possibility of preparing the product in a 300 g batch by eccentric vibratory milling in 30 minutes was successfully verified at the end. The estimated crystallite sizes for the digenite Cu_1.8S obtained via lab-scale and scalable experiments were around 12 and 17 nm, respectively. The obtained products were found to be efficient photocatalysts under visible light irradiation in the presence of hydrogen peroxide, being capable of the complete degradation of the Methyl Orange dye in a concentration of 10 mg L^-1 in 2 hours. Finally, the antibacterial potential of both lab-scale and large-scale industrial products was proven and, regardless of the manufacturing scale, the nanoparticles retained their properties against bacterial cells.

Aqueous-Based Synthesis of Photocatalytic Copper Sulfide Using Sulfur Waste as Sulfurizing Agent

Most of the copper sulfide synthetic approaches developed until now are still facing issues in their procedure, such as long synthesis duration, high energetic consumption, and high implementation costs. This publication reports a facile and sustainable approach for synthesizing copper sulfides on a large scale. In particular, an industrial by-product of sulfur waste was used as a sulfurizing agent for copper sulfide synthesis in a water medium. The reaction was performed in the hydrothermal environment by following a novel proposed mechanism of copper sulfide formation. The investigation of morphological and optical properties revealed that the target products obtained by using waste possess the resembling properties as the ones synthesized from the most conventional sulfurizing agent. Since the determined band gap of synthesis products varied from 1.72 to 1.81 eV, the photocatalytic properties, triggered under visible light irradiation, were also investigated by degrading the methylene blue as a model pollutant. Importantly, the degradation efficiency of the copper sulfide synthesized from sulfur waste was equivalent to a sample obtained from a reference sulfurizing agent since the value for both samples was 96% in 180 min. This very simple synthetic approach opens up a new way for large-scale sustainable production of visible-light-driven photocatalysts for water purification from organic pollutants.

Mechanochemical Preparation, Characterization and Biological Activity of Stable CuS Nanosuspension Capped by Bovine Serum Albumin

The biocompatible nanosuspension of CuS nanoparticles (NPs) using bovine serum albumin (BSA) as a capping agent was prepared using a two-stage mechanochemical approach. CuS NPs were firstly synthetized by a high-energy planetary ball milling in 15 min by milling elemental precursors. The stability of nanoparticles in the simulated body fluids was studied, revealing zero copper concentration in the leachates, except simulated lung fluid (SLF, 0.015%) and simulated gastric fluid (SGF, 0.078%). Albumin sorption on CuS NPs was studied in static and dynamic modes showing a higher kinetic rate for the dynamic mode. The equilibrium state of adsorption was reached after 90 min with an adsorption capacity of 86 mg/g compared to the static mode when the capacity 59 mg/g was reached after 2 h. Then, a wet stirred media milling in a solution of BSA was introduced to yield the CuS-BSA nanosuspension, being stable for more than 10 months, as confirmed by photon cross-correlation spectroscopy. The fluorescent properties of the nanosuspension were confirmed by photoluminescence spectroscopy, which also showed that tryptophan present in the BSA could be closer to the binding site of CuS than the tyrosine residue. The biological activity was determined by in vitro tests on selected cancer and non-tumor cell lines. The results have shown that the CuS-BSA nanosuspension inhibits the metabolic activity of the cells as well as decreases their viability upon photothermal ablation.

Ultrathin covalent and cuprophilic interaction-assembled copper-sulfur monolayer in organic metal chalcogenide for oriented photoconductivity

We report the thinnest copper sulfur atomic monolayer in an organic copper chalcogenide [Cu(CMP)]_n (CMP = 5-chloro-2-mercaptopyridine). The layer features a new type of copper sulfur structure woven by both covalent bond and cuprophilic interaction and shows an intriguing oriented photoconductivity.

CuS Nanoparticles Trigger Sulfite for Fast Degradation of Organic Dyes under Dark Conditions

CuS nanoparticles (CuS NPs) were synthesized by a simple precipitation method using rice starch water as a capping and reducing agent. The phase composition, morphology, absorbance, chemical bonds, and chemical states of the CuS NPs were investigated systematically and then examined for dye degradation catalytic activity with or without sulfite (SO₃ ^2-) under dark conditions. Herein, we observed two reaction trends after the addition of SO₃ ^2- in a CuS NPs/dye system, first substantially enhanced dye degradation and second greater degradation activity between reaction time interval "t" 0-12 min. The redox cycling of Cu(II)/Cu(I) and oxidized sulfur (SO _x ^2-) species on the surface of CuS NPs played a major role for the activation of SO₃ ^2- and generation and transformation of a sulfite radical (^•SO₃ ^-) into a sulfate radical (^•SO₄ ^-). Scavenging studies of reactive oxygen species (ROS) revealed that ^•SO₄ ^- was major reactive species involved in dye degradation. Our study showed that SO₃ ^2- acted as a source and CuS NP surface acted as an SO₃ ^2- activating agent for the generation of ^•SO₄ ^-, which degrades the dyes. The activation pathway of SO₃ ^2- and generation pathway of relevant ROS were proposed.

CuS nanoparticles-enhanced luminol-O2 chemiluminescence reaction used for determination of paracetamol and vancomycin

A new chemiluminescence (CL) method was proposed to measure two widely used drugs, including paracetamol (PCM) and vancomycin (VAN). The CL reaction used was the CuS nanoparticles (CuS NPs)-luminol-O₂ system. In this system, CuS NPs played the role of catalyst and increased the CL intensity. CuS NPs were easily synthesized by quick-precipitation. CuS NPs were characterized by spectroscopic techniques, and the mean size of NPs was estimated to be about 9 nm. In the developed CL methods, PCM and VAN decreased the CL intensity. In the proposed method, the linear concentration ranges were 4.0 × 10^-5-4.0 × 10^-4 mol L^-1 of PCM and 2.0 × 10^-5-6.0 × 10^-4 mol L^-1 of VAN. The limit of detections were 2.9 × 10^-5 mol L^-1 and 8.9 × 10^-6 mol L^-1 for PCM and VAN, respectively. The relative standard deviations (RSD) of the CL method were 2.99 and 4.31 (n = 6) for the determination of 3.0 × 10^-4 mol L^-1 PCM and VAN, respectively. It was also shown that the CL methods can measure PCM and VAN concentrations in various real samples.

Copper Dithiocarbamates: Coordination Chemistry and Applications in Materials Science, Biosciences and Beyond

Copper dithiocarbamate complexes have been known for ca. 120 years and find relevance in biology and medicine, especially as anticancer agents and applications in materials science as a single-source precursor (SSPs) to nanoscale copper sulfides. Dithiocarbamates support Cu(I), Cu(II) and Cu(III) and show a rich and diverse coordination chemistry. Homoleptic [Cu(S2CNR2)2] are most common, being known for hundreds of substituents. All contain a Cu(II) centre, being either monomeric (distorted square planar) or dimeric (distorted trigonal bipyramidal) in the solid state, the latter being held together by intermolecular C···S interactions. Their d9 electronic configuration renders them paramagnetic and thus readily detected by electron paramagnetic resonance (EPR) spectroscopy. Reaction with a range of oxidants affords d8 Cu(III) complexes, [Cu(S2CNR2)2][X], in which copper remains in a square-planar geometry, but Cu–S bonds shorten by ca. 0.1 Å. These show a wide range of different structural motifs in the solid-state, varying with changes in anion and dithiocarbamate substituents. Cu(I) complexes, [Cu(S2CNR2)2]−, are (briefly) accessible in an electrochemical cell, and the only stable example is recently reported [Cu(S2CNH2)2][NH4]·H2O. Others readily lose a dithiocarbamate and the d10 centres can either be trapped with other coordinating ligands, especially phosphines, or form clusters with tetrahedral [Cu(μ3-S2CNR2)]4 being most common. Over the past decade, a wide range of Cu(I) dithiocarbamate clusters have been prepared and structurally characterised with nuclearities of 3–28, especially exciting being those with interstitial hydride and/or acetylide co-ligands. A range of mixed-valence Cu(I)–Cu(II) and Cu(II)–Cu(III) complexes are known, many of which show novel physical properties, and one Cu(I)–Cu(II)–Cu(III) species has been reported. Copper dithiocarbamates have been widely used as SSPs to nanoscale copper sulfides, allowing control over the phase, particle size and morphology of nanomaterials, and thus giving access to materials with tuneable physical properties. The identification of copper in a range of neurological diseases and the use of disulfiram as a drug for over 50 years makes understanding of the biological formation and action of [Cu(S2CNEt2)2] especially important. Furthermore, the finding that it and related Cu(II) dithiocarbamates are active anticancer agents has pushed them to the fore in studies of metal-based biomedicines.

Advances in photothermal nanomaterials for biomedical, environmental and energy applications

Materials that exhibit photothermal effect have attracted enormous research interests due to their ability to strongly absorb light and effectively transform it into heat for a wide range of applications in biomedical, environmental and energy related fields. The past decade has witnessed significant advances in the preparation of a variety of photothermal materials, mainly due to the emergence of many nano-enabled new materials, such as plasmonic metals, stoichiometric/non-stoichiometric semiconductors, and the newly emerging MXenes. These photothermal nanomaterials can be hybridized with other constituents to form functional hybrids or composites for achieving enhanced photothermal performance. In this review, we present the fundamental insight of inorganic photothermal materials, including their photothermal conversion mechanisms/properties as well as their potential applications in various fields. Emphasis is placed on strategic approaches for improving their light harvesting and photothermal conversion capabilities through engineering their nanostructured size, shape, composition, bandgap and so on. Lastly, the underlying challenges and perspectives for future development of photothermal nanomaterials are proposed.

Radiation-induced synthesis of copper sulfide nanotubes with improved catalytic and antibacterial activities

In the current paper, copper sulfide nanotubes have been successfully synthesized via the green, simple, and effective gamma-radiolysis method without adding any capping or reducing agents. The structural and morphological characteristics of the as-prepared CuS nanotubes were investigated by X-ray diffraction (XRD), N₂ adsorption-desorption measurements at 77 K, transmission electron microscopy (TEM), and ultraviolet-visible (UV-vis) spectroscopy, which all demonstrated the formation of pure CuS covellite phase with tubular morphology. The synthesized CuS nanotubes possessed not only high activity towards the reduction of both cationic (methylene blue) and anionic (Congo red) dyes in the presence of NaBH₄ but also exhibited excellent reusability. In addition, the pseudo-first-order kinetic model represented the reduction of MB very well, and the value of the normalized rate constant (2.4 × 10^-2 s^-1 mg^-1) was higher than those of other solid catalysts reported in the literature. Ultimately, CuS nanotubes were found to have a broad-spectrum microbicidal action against the common microbiota, such as Gram-positive (exemplified by Bacillus subtilis and Staphylococcus aureus), Gram-negative bacteria (exemplified by Pseudomonas aeruginosa and Escherichia coli), yeast (exemplified by Candida albicans), and plant pathogenic fungi (exemplified by Aspergillus niger).

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Owing to their high performance and earth abundance, copper sulfides (Cu_2-x S) have attracted wide attention as a promising medium-temperature thermoelectric material. Nanostructure and grain-boundary engineering are explored to tune the electrical transport and phonon scattering of Cu_2-x S based on the liquid-like copper ion. Here multiscale architecture-engineered Cu_2-x S are fabricated by a room-temperature wet chemical synthesis combining mechanical mixing and spark plasma sintering. The observed electrical conductivity in the multiscale architecture-engineered Cu_2-x S is four times as much as that of the Cu_2-x S sample at 800 K, which is attributed to the potential energy filtering effect at the new grain boundaries. Moreover, the multiscale architecture in the sintered Cu_2-x S increases phonon scattering and results in a reduced lattice thermal conductivity of 0.2 W·m^-1·K^-1 and figure of merit (zT) of 1.0 at 800 K. Such a zT value is one of the record values in copper sulfide produced by chemical synthesis. These results suggest that the introduction of nanostructure and formation of new interface are effective strategies for the enhancement of thermoelectric material properties.

SUPPLEMENTARY INFORMATION

The online version of this article (10.1007/s12598-020-01698-6) contains supplementary material, which is available to authorized users.

Enhanced Supercapacitor Performance and Electromagnetic Interference Shielding Effectiveness of CuS Quantum Dots Grown on Reduced Graphene Oxide Sheets

This study is focused on the preparation of the CuS/RGO nanocomposite via the hydrothermal method using GO and Cu-DTO complex as precursors. X-ray diffraction, Fourier-transform infrared spectroscopy, and Raman and X-ray photoelectron spectroscopy study revealed the formation of the CuS/RGO nanocomposite with improved crystallinity, defective nanostructure, and the presence of the residual functional group in the RGO sheet. The morphological study displayed the transformation of CuS from nanowire to quantum dots with the incorporation of RGO. The galvanostatic charge/discharge curve showed that the CuS/RGO nanocomposite (12 wt % Cu-DTO complex) has tremendous and outperforming specific capacitance of 3058 F g-1 at 1 A g-1 current density with moderate cycling stability (∼60.3% after 1000 cycles at 10 A g-1). The as-prepared nanocomposite revealed excellent improvement in specific capacitance, cycling stability, Warburg impedance, and interfacial charge transfer resistance compared to neat CuS. The fabricated nanocomposites were also investigated for their bulk DC electrical conductivity and EMI shielding ability. It was observed that the CuS/RGO nanocomposite (9 wt % Cu-DTO) exhibited a total electromagnetic shielding efficiency of 64 dB at 2.3 GHz following absorption as a dominant shielding mechanism. Such a performance is ascribed to the presence of interconnected networks and synergistic effects.

Room Temperature Wafer-Scale Synthesis of Highly Transparent, Conductive CuS Nanosheet Films via a Simple Sulfur Adsorption-Corrosion Method

The development of highly conductive electrodes with robust mechanical durability and clear transmittance in the visible to IR spectral range is of great importance for future wearable/flexible electronic applications. In particular, low resistivity, robust flexibility, and wide spectral transparency have a significant impact on optoelectronic performance. Herein, we introduce a new class of covellite copper monosulfide (CuS) nanosheet films as a promising candidate for soft transparent conductive electrodes (TCEs). An atmospheric sulfur adsorption-corrosion phenomenon represents a key approach in our work for the achievement of wafer-scale CuS nanosheet films through systematic control of the neat Cu layer thickness ranging from 2 to 10 nm multilayers at room temperature. These nanosheet films provide outstanding conductivity (∼25 Ω sq^-1) and high transparency (> 80%) in the visible to infrared region as well as distinct flexibility and long stability under air exposure, yielding a high figure-of-merit (∼60) that is comparable to that of conventional rigid metal oxide material-based TCEs. Our unique room temperature synthesis process delivers high quality CuS nanosheets on any arbitrary substrates in a short time (< 1 min) scale, thus guaranteeing the widespread use of highly producible and scalable device fabrication.

Seeded Growth Combined with Cation Exchange for the Synthesis of Anisotropic Cu2-x S/ZnS, Cu2-x S, and CuInS2 Nanorods

Colloidal copper(I) sulfide (Cu_2-x S) nanocrystals (NCs) have attracted much attention for a wide range of applications because of their unique optoelectronic properties, driving scientists to explore the potential of using Cu_2-x S NCs as seeds in the synthesis of heteronanocrystals to achieve new multifunctional materials. Herein, we developed a multistep synthesis strategy toward Cu_2-x S/ZnS heteronanorods. The Janus-type Cu_2-x S/ZnS heteronanorods are obtained by the injection of hexagonal high-chalcocite Cu_2-x S seed NCs in a hot zinc oleate solution in the presence of suitable surfactants, 20 s after the injection of sulfur precursors. The Cu_2-x S seed NCs undergo rapid aggregation and coalescence in the first few seconds after the injection, forming larger NCs that act as the effective seeds for heteronucleation and growth of ZnS. The ZnS heteronucleation occurs on a single (100) facet of the Cu_2-x S seed NCs and is followed by fast anisotropic growth along a direction that is perpendicular to the c-axis, thus leading to Cu_2-x S/ZnS Janus-type heteronanorods with a sharp heterointerface. Interestingly, the high-chalcocite crystal structure of the injected Cu_2-x S seed NCs is preserved in the Cu_2-x S segments of the heteronanorods because of the high-thermodynamic stability of this Cu_2-x S phase. The Cu_2-x S/ZnS heteronanorods are subsequently converted into single-component Cu_2-x S and CuInS₂ nanorods by postsynthetic topotactic cation exchange. This work expands the possibilities for the rational synthesis of colloidal multicomponent heteronanorods by allowing the design principles of postsynthetic heteroepitaxial seeded growth and nanoscale cation exchange to be combined, yielding access to a plethora of multicomponent heteronanorods with diameters in the quantum confinement regime.

Copper sulfide nanostructures: easy synthesis, photocatalytic and doxorubicin anticancer drug delivery applications

Copper sulfide nanostructures with different morphologies were used as a photocatalyst and antitumor drug delivery.

Cadmium and copper heavy metal treatment from water resources by high-performance folic acid-graphene oxide nanocomposite adsorbent and evaluation of adsorptive mechanism using computational intelligence, isotherm, kinetic, and thermodynamic analyses

In this paper, folic acid-coated graphene oxide nanocomposite (FA-GO) is used as an adsorbent for the treatment of heavy metals including cadmium (Cd²⁺) and copper (Cu²⁺) ions. As such, graphene oxide (GO) is modified by folic acid (FA) to synthesize FA-GO nanocomposite and characterized by the atomic force microscopy (AFM), Fourier transform-infrared (FT-IR) spectrophotometry, scanning electron microscopy (SEM), and C/H/N elemental analyses. Also, computational intelligence tests are used to study the mechanism of the interaction of FA molecules with GO. Based on the results, FA molecules formed a strong π-π stacking, chemical, and hydrogen bond interactions with functional groups of GO. Main parameters including pH of the sample solution, amounts of adsorbent, and contact time are studied and optimized by the Response Surface Methodology Based on Central Composite Design (RSM-CCD). In this study, the equilibrium of adsorption is appraised by two (Langmuir and Freundlich and Temkin and D-R models) and three parameter (Sips, Toth, and Khan models) isotherms. Based on the two parameter evaluations, Langmuir and Freundlich models have high accuracy according to the R² coefficient (more than 0.9) in experimental curve fittings of each pollutant adsorption. But, multilayer adsorption of each contaminant onto the FA-GO adsorbent (Freundlich equation) is demonstrated by three parameter isotherm analysis. Also, isotherm calculations express maximum computational adsorption capacities of 103.1 and 116.3 mg g^-1 for Cd²⁺ and Cu²⁺ ions, correspondingly. Kinetic models are scrutinized and the outcomes depict the adsorption of both Cd²⁺ and Cu²⁺ followed by the pseudo-second-order equation. Meanwhile, the results of the geometric model illustrate that the variation of adsorption and desorption rates do not have any interfering during the adsorption process. Finally, thermodynamic studies show that the adsorption of Cu²⁺ and Cd²⁺ onto the FA-GO nanocomposite is an endothermic and spontaneous process.

Electrochemical Enzyme-free Sensing of Oxalic Acid Using an Amine-mediated Synthesis of CuS Nanosphere

Copper sulfide nanospheres (CuS NS) were prepared by a solvothermal method with the support of p-phenylene diamine as a structure direct agent. The formation of CuS NS was evaluated using XRD, FE-SEM, HR-TEM, XPS, and electrochemical methods. The CuS NS modified electrode demonstrated excellent electro-catalytic behavior for the electro-oxidation of oxalic acid (OA). The modified electrode showed a good linear range (50 to 700 μM), high sensitivity (0.0353 μA μM^-1 cm^-2), a low detection limit (35.6 μM), long term stability and good anti-interference behavior.

Graphene templated growth of copper sulphide 'flowers' can suppress electromagnetic interference

With increasing usage of electronic gadgets in various fields, the problem of electromagnetic interference (EMI) has become eminent. To suppress this interference, lightweight materials that are non-corrosive in nature and easy to fabricate, design, integrate and process are in great demand. In the present study, we have grown copper sulphide 'flowers' on graphene oxide by a facile one pot hydrothermal technique. The growth time of the "flower-like" structure was optimised based on structural (XRD) and morphological analysis (SEM). Then, the as-prepared structures were dispersed in a PVDF matrix using melt blending. The bulk AC electrical conductivity and EMI shielding ability of the prepared composite were assessed, and it was observed that the nanocomposites exhibited an EMI shielding effectiveness up to -25 dB manifesting in 86% absorption of the incoming EM waves at a thickness of only 1 mm. Moreover, it was also observed that addition of hybrid nanoparticles has a better effect on the electromagnetic (EM) shielding performance compared to when the nanoparticles are added separately in terms of both total shielding effectiveness as well as absorption performance. A minimum skin depth of 0.38 mm was observed in the case of the hybrid nanostructure.

Ultrasmall aqueous starch-capped CuS quantum dots with tunable localized surface plasmon resonance and composition for the selective and sensitive detection of mercury(ii) ions

Ultrasmall starch-capped CuS quantum dots (QDs) with controllable size were chemically fabricated in an aqueous medium. The phase of the CuS QDs was confirmed via X-ray diffraction (XRD), whereas the characteristic localized surface plasmon resonance (LSPR) peak in the near-infrared (NIR) region was measured using UV-Vis spectroscopy. Transmission electron microscopy and high bandgap analysis confirmed the formation of ultrasmall CuS QDs in the size range of 4-8 nm. CuS QDs have been used for the selective and sensitive detection of Hg2+ ions through colorimetric and spectroscopic techniques. The selective sensing of Hg2+ ions from various metal ions was detected via a remarkable change in color, damping in LSPR intensity, significant change in the Fourier-transform infrared spectra and X-ray photoelectron spectroscopic measurements. The mechanism of interaction between the CuS QDs and Hg2+ ions has been deeply explored in terms of the role played by the starch and the reorganization of sulfide and disulfide bonds to facilitate the access of Hg2+ ions into the CuS lattice. Finally, an intermediate Cu2-x Hg x S nanostructure resulted in the leaching of Cu+ ions into the solution, which were further recovered and reused for the formation of fluorescent Cu2S nanoparticles. Thus, the entire process of synthesis, sensing and reuse paves the way for sustainable nanotechnology.

Potential Link between Cu Surface and Selective CO2 Electroreduction: Perspective on Future Electrocatalyst Designs

Electrochemical reduction of carbon dioxide (CO₂ RR) product distribution has been identified to be dependent on various surface factors, including the Cu facet, morphology, chemical states, doping, etc., which can alter the binding strength of key intermediates such as *CO and *OCCO during reduction. Therefore, in-depth knowledge of the Cu catalyst surface and identification of the active species under reaction conditions aid in designing efficient Cu-based electrocatalysts. This progress report categorizes various Cu-based electrocatalysts into four main groups, namely metallic Cu, Cu alloys, Cu compounds (Cu + non-metal), and supported Cu-based catalysts (Cu supported by carbon, metal oxides, or polymers). The detailed mechanisms for the selective CO₂ RR are presented, followed by recent relevant developments on the synthetic procedures for preparing Cu and Cu-based nanoparticles. Herein, the potential link between the Cu surface and CO₂ RR performance is highlighted, especially in terms of the chemical states, but other significant factors such as defective sites and roughened morphology of catalysts are equally considered during the discussion of current studies of CO₂ RR with Cu-based electrocatalysts to fully understand the origin of the significant enhancement toward C₂ formation. This report concludes by providing suggestions for future designs of highly selective and stable Cu-based electrocatalysts for CO₂ RR.

Plasmonic Copper Sulfide Nanoparticles Enable Dark Contrast in Optical Coherence Tomography

Optical coherence tomography (OCT) is an imaging technique affording noninvasive optical biopsies. Like for other imaging techniques, the use of dedicated contrast agents helps better discerning biological features of interest during the clinical practice. Although bright OCT contrast agents have been developed, no dark counterpart has been proposed yet. Herein, plasmonic copper sulfide nanoparticles as the first OCT dark contrast agents working in the second optical transparency window are reported. These nanoparticles virtually possess no light scattering capabilities at the OCT working wavelength (≈1300 nm); thus, they exclusively absorb the probing light, which in turn results in dark contrast. The small size of the nanoparticles and the absence of apparent cytotoxicity support the amenability of this system to biomedical applications. Importantly, in the pursuit of systems apt to yield OCT dark contrast, a library of copper sulfide nanoparticles featuring plasmonic resonances spanning the three optical transparency windows is prepared, thus highlighting the versatility and potential of these systems in light-controlled biomedical applications.

Designing novel morphologies of l-cysteine surface capped 2D covellite (CuS) nanoplates to study the effect of CuS morphologies on dye degradation rate under visible light

Novel CuS@l-Cys NPs are designed by a hydrothermal route. The effects of synthetic parameters on the morphologies of CuS@l-Cys NPs were investigated. CuS@l-Cys NPs exhibit an enhanced dye degradation rate under visible light.

Facile Preparation of CuS Nanoparticles from the Interfaces of Hydrophobic Ionic Liquids and Water

In this work, a two-phase system composed of hydrophobic ionic liquid (IL) and water phases was introduced to prepare copper sulfide (CuS) nanoparticles. It was found that CuS particles generated from the interfaces of carboxyl-functionalized IL and sodium sulfide (Na₂S) aqueous solution were prone to aggregate into nanoplates and those produced from the interfaces of carboxyl-functionalized IL and thioacetamide (TAA) aqueous solution tended to aggregate into nanospheres. Both the CuS nanoplates and nanospheres exhibited a good absorption ability for ultraviolet and visible light. Furthermore, the CuS nanoplates and nanospheres showed highly efficient photocatalytic activity in degrading rhodamine B (RhB). Compared with the reported CuS nanostructures, the CuS nanoparticles prepared in this work could degrade RhB under natural sunlight irradiation. Finally, the production of CuS from the interfaces of hydrophobic IL and water phases had the advantages of mild reaction conditions and ease of operation.

Parallel Multistream Training of High-Dimensional Neural Network Potentials

Over the past years high-dimensional neural network potentials (HDNNPs), fitted to accurately reproduce ab initio potential energy surfaces, have become a powerful tool in chemistry, physics and materials science. Here, we focus on the training of the neural networks that lies at the heart of the HDNNP method. We present an efficient approach for optimizing the weight parameters of the neural network via multistream Kalman filtering, using potential energies and forces as reference data. In this procedure, the choice of the free parameters of the Kalman filter can have a significant impact on the fit quality. Carrying out a large parameter study, we determine optimal settings and demonstrate how to optimize training results of HDNNPs. Moreover, we illustrate our HDNNP training approach by revisiting previously presented fits for water and developing a new potential for copper sulfide. This material, accessible in computer simulations so far only via first-principles methods, forms a particularly complex solid structure at low temperatures and undergoes a phase transition to a superionic state upon heating. Analyzing MD simulations carried out with the Cu₂S HDNNP, we confirm that the underlying ab initio reference method indeed reproduces this behavior.

3D hierarchical porous CuS flower-dispersed CNT arrays on nickel foam as a binder-free electrode for supercapacitors

To fabricate excellent electrochemical supercapacitors, 3D porous copper sulfide flower dispersed carbon nanotube on nickel foam (CuS–CNTs@NF) with high energy density and stability were synthesized via a simple one-step solvothermal method.

S. V, C. S. PK, Kandaiah S. Anodic fabrication of nanostructured CuxS and CuNiSx thin films and their hydrogen evolution activities in acidic electrolytes

The electrochemical anodization method is advantageous for direct growth of highly ordered and large surface area hybrid nanostructures.

Chemical epitaxy of a new orthorhombic phase of Cu2−xS on GaAs

Chemical epitaxy of copper sulfide thin films on GaAs resulted in a previously unreported base-centered orthorhombic phase of Cu_2−xS.

Coated silver nanoparticles: synthesis, cytotoxicity, and optical properties

Coated silver nanoparticles (AgNPs) have recently become a topic of interest due to the fact that they have several applications such as in electronic, antimicrobial, industrial, optical, and medical fields as biosensors and drug delivery systems. However, the use of AgNPs in medical fields remains somewhat limited due to their probable cytotoxic effect. Researchers have succeeded in reducing the toxicity of silver particles by coating them with different substances. Generally, the coating of AgNPs leads to change in their properties depending on the type of the coating material as well as the layer thickness. This review covers the state-of-the-art technologies behind (a) the synthesis of coated AgNPs including coating methods and coating materials, (b) the cytotoxicity of coated AgNPs and (c) the optical properties of coated AgNPs.

Coated silver nanoparticles (AgNPs) have recently become a topic of interest due to the fact that they have several applications such as in electronic, antimicrobial, industrial, optical, and medical fields as biosensors and drug delivery systems.

Pro-angiogenic near infrared-responsive hydrogels for deliberate transgene expression

CuS nanoparticles (CuSNP) are degradable, readily prepared, inexpensive to produce and efficiently cleared from the body. In this work, we explored the feasibility of CuSNP to function as degradable near infrared (NIR) nanotransducers within fibrin-based cellular scaffolds. To prepare NIR-responsive CuSNP hydrogels, fibrinogen was dissolved in cell culture medium and supplemented with aqueous dispersions of CuSNP. Fibrinogen polymerization was catalyzed by the addition of thrombin. In some experiments, HUVEC, C3H/10T1/2 or C3H/10T1/2-fLuc cells, that harbor a heat-activated and rapamycin-dependent gene switch for regulating the expression of firefly luciferase transgene, were incorporated to the sol phase of the hydrogel. For in vivo experiments, hydrogels were injected subcutaneously in the back of adult C3H/HeN mice. Upon NIR irradiation, CuSNP hydrogels allowed heat-inducible and rapamycin-dependent transgene expression in cells contained therein, in vitro and in vivo. C3H/10T1/2 cells cultured in CuSNP hydrogels increased metabolic activity, survival rate and fibrinolytic activity, which correlated with changes at the transcriptome level. Media conditioned by CuSNP hydrogels increased viability of HUVEC which formed pseudocapillary structures and remodeled protein matrix when entrapped within these hydrogels. After long-term implantation, the skin patches that covered the CuSNP hydrogels showed increased capillary density which was not detected in mice implanted with matrices lacking CuSNP. In summary, NIR-responsive scaffolds harboring CuSNP offer compelling features in the tissue engineering field, as degradable implants with enhanced integration capacity in host tissues that can provide remote controlled deployment of therapeutic gene products.

STATEMENT OF SIGNIFICANCE

Hydrogels composed of fibrin embedding copper sulfide nanoparticles (CuSNP) efficiently convert incident near infrared (NIR) energy into heat and can function as cellular scaffolding. NIR laser irradiation of CuSNP hydrogels can be employed to remotely induce spatiotemporal patterns of transgene expression in genetically engineered multipotent stem cells. CuSNP incorporation in hydrogel architecture accelerates the cell-mediated degradation of the fibrin matrix and induces pro-angiogenic responses that may facilitate the integration of these NIR-responsive scaffolds in host tissues. CuSNP hydrogels that harbor cells capable of controlled expression of therapeutic gene products may be well suited for tissue engineering as they are biodegradable, enhance implant vascularization and can be used to deploy growth factors in a desired spatiotemporal fashion.

Room temperature synthesis of aqueous soluble covellite CuS nanocrystals with high photothermal conversion

Generating aqueous soluble covellite CuS nanocrystals with well-defined NIR plasmon absorbance by reacting Cu²⁺ with S²⁻ ions via a facile and scalable protocol at room temperature, in the presence of various ligands.

Large-scale synthesis of copper sulfide by using elemental sources via simple chemical route

Copper sulfide is a low-cost and non-toxic material which is very attractive and promising for various applications. There is a need of a large-scale production of this material by simple methods. Here, a simple and ambient method is proposed for a large-scale preparation of copper sulfide. The synthesis is carried out at room temperature by using ultrasonication method where the elemental precursors, copper and sulfur are directly used. The present method gives gram scale synthesis with high yield in a short period of time. The materials are characterized by different techniques, their electrical conductivity and Seebeck coefficient are also measured and analyzed. The present method is one of the simple ways of producing copper sulfide just at room temperature.

Switching between Plasmonic and Fluorescent Copper Sulfide Nanocrystals

Control over the doping density in copper sulfide nanocrystals is of great importance and determines its use in optoelectronic applications such as NIR optical switches and photovoltaic devices. Here, we demonstrate that we can reversibly control the hole carrier density (varying from >10²² cm^–3 to intrinsic) in copper sulfide nanocrystals by electrochemical methods. We can control the type of charge injection, i.e., capacitive charging or ion intercalation, via the choice of the charge compensating cation (e.g., ammonium salts vs Li⁺). Further, the type of intercalating ion determines whether the charge injection is fully reversible (for Li⁺) or leads to permanent changes in doping density (for Cu⁺). Using fully reversible lithium intercalation allows us to switch between thin films of covellite CuS NCs (E_g = 2.0 eV, hole density 10²² cm^–3, strong localized surface plasmon resonance) and low-chalcocite CuLiS NCs (E_g = 1.2 eV, intrinsic, no localized surface plasmon resonance), and back. Electrochemical Cu⁺ ion intercalation leads to a permanent phase transition to intrinsic low-chalcocite Cu₂S nanocrystals that display air stable fluorescence, centered around 1050 nm (fwhm ∼145 meV, PLQY ca. 1.8%), which is the first observation of narrow near-infrared fluorescence for copper sulfide nanocrystals. The dynamic control over the hole doping density and fluorescence of copper sulfide nanocrystals presented in this work and the ability to switch between plasmonic and fluorescent semiconductor nanocrystals might lead to their successful implementation into photovoltaic devices, NIR optical switches and smart windows.

Diversified copper sulfide (Cu2-xS) micro-/nanostructures: a comprehensive review on synthesis, modifications and applications

As a significant metal chalcogenide, copper sulfide (Cu_2-xS, 0 < x < 1), with a unique semiconducting and nontoxic nature, has received significant attention over the past few decades. Extensive investigations have been employed to the various Cu_2-xS micro-/nanostructures owing to their excellent optoelectronic behavior, potential thermoelectric properties, and promising biomedical applications. As a result, micro-/nanostructured Cu_2-xS with well-controlled morphologies, sizes, crystalline phases, and compositions have been rationally synthesized and applied in the fields of photocatalysis, energy conversion, in vitro biosensing, and in vivo imaging and therapy. However, a comprehensive review on diversified Cu_2-xS micro-/nanostructures is still lacking; therefore, there is an imperative need to thoroughly highlight the new advances made in function-directed Cu_2-xS-based nanocomposites. In this review, we have summarized the important progress made in the diversified Cu_2-xS micro-/nanostructures, including that in the synthetic strategies for the preparation of 0D, 1D, 2D, and 3D micro-/nanostructures (including polyhedral, hierarchical, hollow architectures, and superlattices) and in the development of modified Cu_2-xS-based composites for enhanced performance, as well as their various applications. Furthermore, the present issues and promising research directions are briefly discussed.