Metal-Organic Frameworks/Heterojunction Structures for Surface-Enhanced Raman Scattering with Enhanced Sensitivity and Tailorability

Metal-organic frameworks (MOFs), which are composed of crystalline microporous materials with metal ions, have gained considerable interest as promising substrate materials for surface-enhanced Raman scattering (SERS) detection via charge transfer. Research on MOF-based SERS substrates has advanced rapidly because of the MOFs' excellent structural tunability, functionalizable pore interiors, and ultrahigh surface-to-volume ratios. Compared with traditional noble metal SERS plasmons, MOFs exhibit better biocompatibility, ease of operation, and tailorability. However, MOFs cannot produce a sufficient limit of detection (LOD) for ultrasensitive detection, and therefore, developing an ultrasensitive MOF-based SERS substrate is imperative. To the best of our knowledge, this is the first study to develop an MOFs/heterojunction structure as an SERS enhancing material. We report an in situ ZIF-67/Co(OH)2 heterojunction-based nanocellulose paper (nanopaper) plate (in situ ZIF-67 nanoplate) as a device with an LOD of 0.98 nmol/L for Rhodamine 6G and a Raman enhancement of 1.43 × 107, which is 100 times better than that of the pure ZIF-67-based SERS substrate. Further, we extend this structure to other types of MOFs and develop an in situ HKUST-1 nanoplate (with HKUST-1/Cu(OH)2). In addition, we demonstrate that the formation of heterojunctions facilitates efficient photoinduced charge transfer for SERS detection by applying the Mx(OH)y-assisted (where M = Co, Cu, or other metals) MOFs/heterojunction structure. Finally, we successfully demonstrate the application of medicine screening on our nanoplates, specifically for omeprazole. The nanoplates we developed still maintain the tailorability of MOFs and perform high anti-interference ability. Our approach provides customizing options for MOF-based SERS detection, catering to diverse possibilities in future research and applications.

A double defects-dominated flexible TiO2 matrix for in-situ SERS sensing of antibiotic residues in aquatic ecosystem (fish & fishpond water) and their on-site degradation in flowing water

High-performance flexible semiconductor material can be used as an excellent multifunctional matrix for in-situ ultrasensitive surface-enhanced Raman scattering (SERS) detection and synchronous photocatalytic degradation of antibiotic residues in aquatic ecosystem. Here, a calcium-doped TiO2 flexible matrix with double defects (surface oxygen vacancy defect and Ti3+ energy level defect) was developed by its "in-situ one-step" hydrothermal synthesis on cotton fabric for the above purposes. Due to the joint contribution of double defects, a multi-channel charge transfer mode and a high-efficiency carrier separation are achieved, which endows flexible cotton fabric/Ca-doped TiO2 (Cot/Ca-TiO2) substrate with the greatly boosted SERS effect for in-situ detection of antibiotic residues on fish body surface and in fishpond water by a simple wiping or dipping sampling method, even for simultaneous identification of multi-component residues. The detection limits of three antibiotic residues (enrofloxacin, ciprofloxacin and enoxacin) are as low as 10-9 M, which are far lower than the EU standard. More meaningfully, the flexible Cot/Ca-TiO2 can be used as a multifunctional filter-membrane type photocatalyst for efficient on-site degradation of antibiotic residues in flowing fishpond water by a multi-grade photocatalysis means. Moreover, the flexible matrix exhibits good recyclability in both actual detection and photocatalysis.

Smart optical sensing of multiple antibiotic residues from wastewater effluents with ensured specificity using SERS assisted with multivariate analysis

Surface-enhanced Raman spectroscopy offers great potential for rapid and highly sensitive detection of pharmaceuticals from environmental sources. Herein, we investigated the feasibility of label-free sensing of antibiotic residues from wastewater effluents with high specificity by combining with multivariate analysis. Highly ordered silver nanoarrays with ∼34 nm roughness have been fabricated using a cost-effective electroless deposition technique. As-fabricated Ag arrays showed superior LSPR effects with an enhancement factor of 8 × 107. Excellent reproducibility has also been noticed with RSD values within 11%, whilst the sensor showed good stability and reusability characteristics for being used as a low-cost and reusable sensor. SERS studies demonstrated that antibiotics-spiked wastewater effluents can be detected with high efficiency in a label-free method. The molecular fingerprint bands of antibiotics such as sulfamethoxazole, sulfadiazine, and ciprofloxacin were well analyzed in effluent, tap, and deionized water. It has been found that antibiotics can be detected near picomolar levels; meanwhile, liquid chromatography-mass spectrometry (LC-MS) exhibited a detection limit within nanomolar concentrations only. Furthermore, the specificity of SERS sensing has been further analyzed using a multivariate analysis method, principal component analysis followed by linear discriminant analysis (PCA-LDA); which showed prominent discrimination to distinguish each antibiotic residue from wastewater effluents. The current study presented the potential of Ag nanoarray sensors for rapid, highly specific, and cost-effective analysis of pharmaceutical products for environmental remediation applications.

Multifunctional Ni(OH)2/Ag composites for ultrasensitive SERS detection and efficient photocatalytic degradation of ciprofloxacin and methylene blue

To enable the widespread application of surface-enhanced Raman scattering (SERS) technique in practical sensing of organic pollutants, it is essential to develop a reliable SERS substrate that offers both high sensitivity and reusability. In this study, we employed a simple and rapid in-situ deposition method to coat Ag nanoparticles onto flower-like Ni(OH)2 spheres, resulting in the formation of Ni(OH)2/Ag composites with excellent photocatalytic performance and SERS activity. These composites were used as a promising SERS analysis tool for effective detection of organic pollutants, including ciprofloxacin hydrochloride (CIP) and methylene blue (MB). Notably, the composites exhibited outstanding detection limits of 10-8 M for MB and 10-7 M for CIP, respectively, and showed a strong linear relationship between SERS intensities and the logarithmic concentration (R2 ≥ 0.97). Moreover, under simulated sunlight irradiation, the Ni(OH)2/Ag composites efficiently degraded MB and CIP molecules within a short period of 120 min for MB and 130 min for CIP. This demonstrated their practical reusability, as evidenced by their consistent performance over five cycles of SERS sensing. These findings underscore the significant potential of these composites for SERS-based detection of trace pollutants and ecological restoration through photocatalytic reactions in the future.

Surface-enhanced Raman scattering detection of thiram and ciprofloxacin using chitosan-silver coated paper substrates

Fast detection of contaminants of emerging concern (CECs) in water resources is of great environmental interest. Ideally, sustainable materials should be used in water quality monitoring technologies implemented for such purposes. In this regard, the application of bio-based materials aimed at the fabrication of analytical platforms has become of great importance. This research merges both endeavors by exploring the application of chitosan-coated paper, decorated with silver nanoparticles (AgNPs), on surface-enhanced Raman scattering (SERS) spectroscopy studies of two distinct types of CECs dissolved in aqueous samples: an antibiotic (ciprofloxacin) and a pesticide (thiram). Our results indicate the superior SERS performance of biocoated substrates compared to their non-coated paper counterparts. The detection limits achieved for thiram and ciprofloxacin using the biocoated substrates were 0.024 ppm and 7.7 ppm, respectively. The efficient detection of both analytes is interpreted in terms of the role of the biopolymer in promoting AgNPs assemblies that result in local regions of enhanced SERS activity. Taking advantage of these observations, we use confocal Raman microscopy to obtain Raman images of the substrates using ciprofloxacin and thiram as molecular probes. We also demonstrate that these biobased substrates can be promising for on-site analysis when used in conjunction with portable Raman instruments.

Application of microfluidic technology based on surface-enhanced Raman scattering in cancer biomarker detection: A review

With the continuous discovery and research of predictive cancer-related biomarkers, liquid biopsy shows great potential in cancer diagnosis. Surface-enhanced Raman scattering (SERS) and microfluidic technology have received much attention among the various cancer biomarker detection methods. The former has ultrahigh detection sensitivity and can provide a unique fingerprint. In contrast, the latter has the characteristics of miniaturization and integration, which can realize accurate control of the detection samples and high-throughput detection through design. Both have the potential for point-of-care testing (POCT), and their combination (lab-on-a-chip SERS (LoC-SERS)) shows good compatibility. In this paper, the basic situation of circulating proteins, circulating tumor cells, exosomes, circulating tumor DNA (ctDNA), and microRNA (miRNA) in the diagnosis of various cancers is reviewed, and the detection research of these biomarkers by the LoC-SERS platform in recent years is described in detail. At the same time, the challenges and future development of the platform are discussed at the end of the review. Summarizing the current technology is expected to provide a reference for scholars engaged in related work and interested in this field.

Preparation of SiO2@Ag@molecular imprinted polymers hybrid for sensitive and selective detection of amoxicillin using surface-enhanced Raman scattering

In this work, we fabricated a 300 nm-sized silver-coated silica (SiO₂@Ag) SERS substrate. Based on SiO₂@Ag, we designed SiO₂@Ag@molecular imprinted polymers (SiO₂@Ag@MIPs) to realize selectively detection of amoxicillin by coating a molecular imprinted layer averagely thinner than 10 nm on SiO₂@Ag. The as-prepared SERS-active substrate demonstrates excellent enhancement for amoxicillin as well as the enhancement factors were 1.63 × 10⁶ of SiO₂@Ag@MIPs and 2.97 × 10⁵ of SiO₂@Ag, respectively. The SiO₂@Ag@MIPs core-shell hybrids as SERS substrates and the minimum detectable concentration of amoxicillin was as low as 2.7 × 10^-9 M, and the detection limit of SiO₂@Ag was 2.7 × 10^-7 M. The linear relationship between intensities of characteristic peaks and concentrations of amoxicillin was established. Both SiO₂@Ag and SiO₂@Ag@MIPs substrates were highly sensitive and could achieve qualitative and semi-quantitative analysis of amoxicillin in aqueous media with good linear correlations. Based on the above, SiO₂@Ag@MIPs will be conducive to detecting actual samples and expanding the practical application.

Cyclodextrin-assisted SERS determination of fluoroquinolone antibiotics in urine and blood plasma

This paper describes the use of cyclodextrins (CDs) to improve the determination of fluoroquinolone antibiotics in human body fluids using surface-enhanced Raman spectroscopy (SERS). CDs were used to (i) prepare the CD-SERS substrate (synthesis and stabilization of silver nanoparticles), (ii) increase the sensitivity of the assay by enhancing the interaction between analyte molecules and the substrate, and (iii) improve the analysis accuracy by reducing the interaction between the substrate and endogenous components of body fluids. Two native CDs (α-CD and β-CD) and two of their derivatives with hydroxypropyl groups were tested, and the best results were obtained with CD-SERS substrate prepared using native β-CD. The CD-SERS assay has been developed and optimized for the determination of commonly used and structurally related fluoroquinolones (ciprofloxacin, norfloxacin, pefloxacin, and levofloxacin) in urine and blood plasma samples. Importantly, the non-significant difference in the interaction of the CD-modified SERS substrate with various fluoroquinolones has been successfully used to develop a versatile assay suitable for the analyte-class-specific analysis. Calibration plots were obtained for concentration ranges suitable for the determination of the antibiotics in urine (50-500 μg mL^-1) and blood plasma (1-6 μg mL^-1). The following figures of merit were obtained (for urine and blood plasma, respectively): RSD values are ≤15% and ≤23%, LOD values are 2.9-5.8 and 0.05-0.34 μg mL^-1, recovery ranges are 96-105% and 91-111%. In addition, the influence of excessive concentrations of some main endogenous components of the body fluids on the analytical signal was studied. This step was used to evaluate possible limitations of the assay associated with the deviation of the composition of the body fluid matrix. Therefore, accounting for the short analysis time (≤15 min) and the use of a portable Raman spectrometer, the proposed assay can be suggested for therapeutic drug monitoring in hospitals.

Ciprofloxacin Release and Corrosion Behaviour of a Hybrid PEO/PCL Coating on Mg3Zn0.4Ca Alloy

In the present work, a hybrid hierarchical coating (HHC) system comprising a plasma electrolytic oxidation (PEO) coating and a homogeneously porous structured polycaprolactone (PCL) top-coat layer, loaded with ciprofloxacin (CIP), was developed on Mg3Zn0.4Ca alloy. According to the findings, the HHC system avoided burst release and ensured gradual drug elution (64% over 240 h). The multi-level protection of the magnesium alloy is achieved through sealing of the PEO coating pores by the polymer layer and the inhibiting effect of CIP (up to 74%). The corrosion inhibition effect of HHC and the eluted drug is associated with the formation of insoluble CIP-Me (Mg/Ca) chelates that repair the defects in the HHC and impede the access of corrosive species as corroborated by FTIR spectra, EIS and SEM images after 24 h of immersion. Therefore, CIP participates in an active protection mechanism by interacting with cations coming through the damaged coating.

Recent advances in non-plasmonic surface-enhanced Raman spectroscopy nanostructures for biomedical applications

Surface-enhanced Raman spectroscopy (SERS) is an emerging powerful vibrational technique offering unprecedented opportunities in biomedical science for the sensitive detection of biomarkers and the imaging and tracking of biological samples. Conventional SERS detection is based on the use of plasmonic substrates (e.g., Au and Ag nanostructures), which exhibit very high enhancement factors (EF = 1010 -1011 ) but suffers from serious limitations, including light-induced local heating effect due to ohmic loss and expensive price. These drawbacks may limit detection accuracy and large-scaled practical applications. In this review, we focus on alternative approaches based on plasmon-free SERS detection on low-cost nanostructures, such as carbons, oxides, chalcogenides, polymers, silicons, and so forth. The mechanism of non-plasmonic SERS detection has been attributed to interfacial charge transfer between the substrate and the adsorbed molecules, with no photothermal side-effects but usually less EF compared with plasmonic nanostructures. The strategies to improve Raman signal detection, through the tailoring of substrate composition, structure, and surface chemistry, is reviewed and discussed. The biomedical applications, for example, SERS cell characterization, biosensing, and bioimaging are also presented, highlighting the importance of substrate surface functionalization to achieve sensitive, accurate analysis, and excellent biocompatibility. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Au-Based Thin-Film Metallic Glasses for Propagating Surface Plasmon Resonance-Based Sensor Applications

We deposited Au-Cu-Si, an Au-based thin-film metallic glass (TFMG) of ∼50 nm thickness, as the activation layer for propagating surface plasmon resonance (PSPR)-based sensors on a BK7 glass substrate to substitute the commonly used gold layer. The film composition was tuned to yield the maximum Au content (∼65 at %), while the structure remained amorphous. The results showed that the Au-based TFMG could support surface plasmon resonance and gave rise to the extinction in the angle-resolved reflection spectrum. Using deionized water and ethyl alcohol with the refractive index difference of ∼0.03 as the analytes, the angle shift given by Au-based TFMG was 4° compared to 5° given by the Au film. Hence, Au-based TFMG is feasible to be used as the activation layer in PSPR-based sensors. Compared to the Au film, Au-based TFMG has the advantages of being less expensive, lacking grain boundary scattering, better adhesion to the substrate, and higher resistance to scratch and corrosion because of its amorphous structure with excellent mechanical properties.

Complementary Powerful Techniques for Investigating the Interactions of Proteins with Porous TiO2 and Its Hybrid Materials: A Tutorial Review

Understanding the adsorption and interaction between porous materials and protein is of great importance in biomedical and interface sciences. Among the studied porous materials, TiO₂ and its hybrid materials, featuring distinct, well-defined pore sizes, structural stability and excellent biocompatibility, are widely used. In this review, the use of four powerful, synergetic and complementary techniques to study protein-TiO_2-based porous materials interactions at different scales is summarized, including high-performance liquid chromatography (HPLC), atomic force microscopy (AFM), surface-enhanced Raman scattering (SERS), and Molecular Dynamics (MD) simulations. We expect that this review could be helpful in optimizing the commonly used techniques to characterize the interfacial behavior of protein on porous TiO₂ materials in different applications.

Plasmon-assisted nanophase engineering of titanium dioxide for improved performances in single-particle based sensing and photocatalysis

Titanium dioxide (TiO₂) due to its large bandgap, has a very limited efficiency in utilizing sunlight for photocatalysis and photoanode applications. Sensitizing with metallic nanoparticles is one of the promising routes for resolving this issue but it requires thermal annealing and proper bandgap engineering to optimize the Schottky junctions. Here we use plasmonic nanoheating to locally anneal the TiO₂ medium with a sub-nanometer (sub-nm) feature, which results in a nanophase transition from amorphous TiO₂ to anatase and rutile with a gradient configuration. Such gradient nanocoatings of rutile/anatase establish a cascade hot electron transfer via a conduction band and defect states, which improves the surface enhanced Raman scattering (SERS) performance and photocatalytic efficiency over an order of magnitude. Unlike conventional global annealing, this nanoannealing strategy with plasmonic heating enables sub-nm control at the interface between the metal and semiconductors, and this strategy not only provides new opportunities for single particle SERS, but also shows significant implications for photocatalysis and hot-electron chemistry.

An electrochemical sensor for voltammetric detection of ciprofloxacin using a glassy carbon electrode modified with activated carbon, gold nanoparticles and supramolecular solvent

A highly sensitive and novel electrochemical sensor for ciprofloxacin (CIP) has been developed using gold nanoparticles deposited with waste coffee ground activated carbon on glassy carbon electrode (AuNPs/AC/GCE) and combined with supramolecular solvent (SUPRAS). The fabricated AuNPs/AC/GCE displayed good electrocatalytic activity for AuNPs. The addition of SUPRAS, prepared from cationic surfactants namely didodecyldimethylammonium bromide (DDAB) and dodecyltrimethylammonium bromide (DTAB), increased the electrochemical response of AuNPs. The detection of CIP was based on the decrease of the cathodic current of AuNPs. The electrochemical behavior of the modified electrode was investigated using cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under optimum conditions, the calibration plot of CIP exhibited a linear response in the range 0.5-25 nM with a detection limit of 0.20 nM. The fabricated electrochemical sensor was successfully applied to determine CIP in milk samples with achieved recoveries of 78.6-110.2% and relative standard deviations of <8.4%. The developed method was also applied to the analysis of pharmaceutical formulation and the results were compared with high-performance liquid chromatography.Graphical abstract.

Label-Free Ultrasensitive and Environment-Friendly Immunosensor Based on a Silica Optical Fiber for the Determination of Ciprofloxacin in Wastewater Samples

Emerging contaminants, including pharmaceutical compounds, are receiving research attention as a result of their widespread presence in effluents and wastewater treatment plants (WWTPs). The antibiotic ciprofloxacin (CIP) is extensively employed to treat infections in animal and human medicine. Both CIP and its metabolites are common contaminants found in WWTPs. In this study, a label-free ultrasensitive U-bent optical fiber-based immunosensor for the determination of CIP in wastewater samples was developed using the properties of the conducting polymer polyaniline (PANI). The anti-CIP immunoglobulin G (IgG) was deposited on a silica optical fiber surface previously functionalized with PANI. Scanning electron microscopy and micro-Raman spectroscopy were used to investigate the surface of the immunosensor. The analysis of CIP in wastewater was performed without the use of an organic solvent or sample preparation steps, with only the sample dilution in saline buffer (pH = 7.4). The linear range for CIP was from 0.01 to 10,000 ng L^-1. The detection limit was 3.30 × 10^-3 ng L^-1 and the quantification limit was 0.01 ng L^-1. The immunosensor provided a high average recovery of 91% after spiking wastewater samples with CIP at a concentration of 9,100 ng L^-1. The method was applied in triplicate to wastewater samples from Quebec (Canada), obtaining concentrations of 549 and 267 ng L^-1. A comparison with a reference method showed no significant difference (t-test at 95% confidence). The new technique developed is selective, allowing a quantitative analysis of CIP in wastewater.

Ultrasensitive SERS detection of antitumor drug methotrexate based on modified Ag substrate

Methotrexate (MTX) is a drug with broad-spectrum antitumor activity that is of great importance in therapeutic drug monitoring applications. In this essay, the two-step modified concentrated Ag colloid with the assistance of KF and MgSO₄ was used as the SERS active substrate for the ultrasensitive detection of MTX and its commercial formulations (tablets). It can be found that the two-step modification of the samples is a crucial procedure to remove the by-products in the synthesis of Ag colloid and further concentrate the Ag colloid. Under the optimal detection conditions, the minimum detection concentration of MTX is 1 × 10^-16 mol/L. And, there is a good linear relationship over a wide concentration range of 1 × 10^-16-1 × 10^-6 mol/L. The labelled amounts of the two manufacturers of MTX commercial tablets are in the range of 96.4-104.3% with the RSDs between 1.8% and 3.5% by this method, which are in accordance with the methodological requirements. These results prove that the proposed SERS method exhibits a good reproducibility and ultra-high sensitivity for the detection of the antitumor drug MTX.

Ultrasensitive SERS-Based Plasmonic Sensor with Analyte Enrichment System Produced by Direct Laser Writing

We report an easy-to-implement device for surface-enhanced Raman scattering (SERS)-based detection of various analytes dissolved in water droplets at trace concentrations. The device combines an analyte-enrichment system and SERS-active sensor site, both produced via inexpensive and high-performance direct femtosecond (fs)-laser printing. Fabricated on a surface of water-repellent polytetrafluoroethylene substrate as an arrangement of micropillars, the analyte-enrichment system supports evaporating water droplet in the Cassie-Baxter superhydrophobic state, thus ensuring delivery of the dissolved analyte molecules towards the hydrophilic SERS-active site. The efficient pre-concentration of the analyte onto the sensor site based on densely arranged spiky plasmonic nanotextures results in its subsequent label-free identification by means of SERS spectroscopy. Using the proposed device, we demonstrate reliable SERS-based fingerprinting of various analytes, including common organic dyes and medical drugs at ppb concentrations. The proposed device is believed to find applications in various areas, including label-free environmental monitoring, medical diagnostics, and forensics.

The contribution of photoinduced charge-transfer enhancement to the SERS of uranyl(VI) in a uranyl-Ag2O complex

Charge-transfer (CT) is an important enhancement mechanism in the field of surface-enhanced Raman scattering (SERS) that typically increases the Raman intensity of molecules by as much as 10-100 times. Herein, a low-cost Ag₂O aggregates substrate was prepared via a facile chemical precipitation method, and the calculated CT-based enhancement factor of the uranyl ions adsorbed on it reached as high as 10⁵, a metal-comparable value. The efficient photoinduced CT process from the valence band of Ag₂O to the LUMO of uranyl ions under appropriate excitation sources resulted in the repulsion of the axial oxygen atoms of the OUO bond, which enhanced its polarizability, creating a more intense Raman mode. To the best of our knowledge, this study firstly reports such a strong photoinduced CT enhancement of uranyl ions, with concentrations of 10^-8 mol L^-1 or lower being detected using this Ag₂O substrate. Most importantly, this research has shown that the photoinduced CT enhancement also contributes to the SERS of uranyl ions on pure Ag substrates which have often been ascribed to the electromagnetic enhancement in previous studies. In addition, Ag₂O can be used to selectively detect uranyl ions without interference from many other molecules or ions because of the energy matching rule of the photoinduced CT process, which was readily available for uranyl detection in the environmental aqueous solution.

Development of ciprofloxacin-loaded poly(vinyl alcohol) dry powder formulations for lung delivery

Polymeric microparticles are micro carriers for the sustained drug delivery of drugs in the lungs, used as alternatives to the use of established excipients. This study aims to develop and characterize inhalable ciprofloxacin (CPx)-loaded poly(vinyl alcohol) (PVA) microparticles by a single-step spray-drying procedure. The optimization of the processing parameters was achieved by an orthogonal design of the most relevant processing parameters (polymer concentration, feed rate and inlet temperature). The obtained spray-dried particles showed a drug encapsulation efficiency higher than 90%. Furthermore, PVA-CPx formulations, with drug contents up to 10 wt%, showed a morphology and size suitable for inhalation, with a sustained release profile over 24 h. Data from Fourier transformed infra-red spectroscopy and differential scanning calorimetry indicated absence of interaction between the polymer matrix and the drug. Aerodynamic assessment of PVA-CPx 10 wt% was determined by the next generation impactor (NGI), using spray-dried CPx as a control. The results showed improved values of mass median aerodynamic diameter (5.06±0.10μm) and a fine particle fraction (39.78±0.98%) when comparing with the CPx alone (5.33±0.39μm and 30.43±1.38%). This study highlights the potential of spray-dried PVA microparticles as drug carriers for lung local delivery of antibiotics.

In situ preparation of Ag nanoparticles on silicon wafer as highly sensitive SERS substrate

An intensive surface enhanced Raman scattering (SERS) effect is realized by ordered Ag nanoparticles (NPs) in situ grown on silicon wafer directly using (3-aminopropyl) trimethoxysilane (APS) as both the surface modifier and reducing agent. The as-prepared ordered Ag NPs based SERS substrate shows excellent performance in detecting glycerin (an important integration in liquid super lubricating system) as well as conventional Rhodamine 6G (R6G, a kind of dye organic pollutant). The enhancement factor (EF) achieves 4-fold for glycerin and 10-fold for R6G (allowing for detecting as low as 10-11 M aqueous R6G), confirming the high sensitivity. The limited relative standard deviations (RSD) of the enhancement factors are within 15% for both glycerin and R6G, indicating the excellent uniformity. This remarkable progress is ascribed to the advantages of APS in improving adsorption and modulating distribution of Ag NPs on silicon, which results in a large local electric field to enhance the Raman signals. The SEM and UV-visible absorption spectrum characterization verified the contribution of APS in SERS improvement by investigating the influence of APS content and reduction time during the preparation process. All these advances imply that the SERS substrates prepared by Ag NPs in situ grown on silicon wafer have great potential application in real-time interface state tracing and sensitive detection.

Recyclable Au–TiO2 nanocomposite SERS-active substrates contributed by synergistic charge-transfer effect

We present the Au–TiO₂ nanocomposite as recyclable substrates for SERS enhancement, which is derived from the combined (synergistic) charge-transfer contribution of semiconductors and noble metals.

Interaction of ciprofloxacin and probe compounds with palygorskite PFl-1

The adsorption of ciprofloxacin (CIP) as well as probe compounds, phenylpiperazine (PP) (NH) and fluorochloroquinolone carboxylic acid (FCQCA) (COOH), on palygorskite (PFl-1) obeyed the Langmuir isotherm at pH 2, 7, and 11 except the FCQCA adsorption at pH 2. The CIP and PP adsorption onto PFl-1 was 98-160 mmol/kg. In neutral solution the total amount of exchangeable cations desorbed correlated with the adsorbed amount of CIP and PP well with a slope of 0.9-1, indicating a cation-exchange mechanism. A low amount of FCQCA adsorption of 27-57 mmol/kg was observed and the amount of exchangeable cations desorbed negatively correlate with the amount of FCQCA adsorbed as influenced by surface complexation or cation bridging. FTIR band shifting due to the ring-stretch vibration of PP and the keto-carbonyl group stretching of FCQCA suggested strong interactions as PP and FCQCA absorbed on PFl-1 in neutral solution. In the interaction of CIP with PFl-1, the piperazine-amine group played an important role in cation-exchange interaction in acidic to neutral solution, while the deprotonated keto carbonyl group actively partook in cation bridging or surface complexation with metal cations adsorbed on PFl-1 when the CIP was in anionic form in alkaline solution.

Anatase TiO2 nanoparticles with controllable crystallinity as a substrate for SERS: improved charge-transfer contribution

Anatase TiO₂ nanoparticles were controllably synthesized by a very simple sol-hydrothermal method with the assistance of H₂SO₄ for improving their SERS performances.