Artificial switchable catalysts

Dinuclear group IV metal complexes based on a bis(indenyl)-(E/Z)-stilbene platform: a potential prototype of "photoswitchable" catalysts for olefin polymerization

The preparation of dizirconium complexes based on a novel bis(indenyl)-(E/Z)-stilbene platform was explored. Negishi coupling between the in situ-generated diorganozincates obtained from the respective o/m/p-(E/Z)-dibromostilbenes and the bromo-functionalized zirconocene (η5-Cp*)(η5-2-methyl-4-bromoindenyl)ZrCl2, or, alternatively, the preparation of bis(indene)stilbene pro-ligands {o/m/p-(E/Z)-BisIndSB}H2 through Negishi coupling of the corresponding dibromostilbenes with 4-bromoindene and subsequent metallation/transmetallation with Cp*ZrCl3 or Zr(NMe2)4, allowed the preparation of a series of dinuclear complexes. These were analyzed by NMR spectroscopy and some of them by iASAP-mass spectrometry and by X-ray diffraction studies. Experimental results were compared with DFT modelling of the targeted dinuclear complexes evidencing that the (E)-complexes are more stable by 7-11 kcal mol-1 than their (Z)-analogues. Thermal, uncontrolled isomerization of (Z)- to (E)-stilbene platform was observed experimentally for some systems, in the course of their synthesis, either from the (Z)-dibromostilbene reagent or on the dinuclear complexes resulting from the Negishi coupling. Photoisomerization of the (E)- and (Z)-{BisIndSB}H2 proligands and of complexes {o-(E)-BisIndSB}(Zr(NMe2)3)2 and {m-(E)-BisIndSB}(ZrCl2Cp*)2 was investigated under a variety of conditions. It proved effective for the proligands but induced decomposition of the dizirconium complexes. Time-dependent DFT (TD-DFT) computations were performed to identify unambiguously the nature of the observed absorption bands and account for decomposition of the complexes. Preliminary ethylene/1-hexene homo- and copolymerization investigations did not evidence putative cooperativity phenomena within these dinuclear systems nor significantly differentiated behavior between the (Z)- and (E)-isomers of a given type of complex under the reaction conditions investigated.

Recent Advances on Diarylethene-Based Photoswitching Materials: Applications in Bioimaging, Controlled Singlet Oxygen Generation for Photodynamic Therapy and Catalysis

Photoswitching materials have emerged as a promising class of compounds that possess manifold interesting properties rendering their widespread use from photoswitches, regulators to optoelectronic devices, security technologies and biochemical assays. Diarylethenes (DAE) constitute one such category of photoswitchable compounds, where the key features of stability, photoisomerization wavelengths, quantum yield and variability in the photoisomers significantly depend on their derivatization. The last decade has witnessed a surge in the engagement of DAEs in different areas of chemical and biological sciences, like biomarkers, controlled generation of singlet oxygen, photo-dynamic therapy, chemosensing, catalysis, etc. In all the cases, the photoswitchability of DAE is the principal regulating factor along with its emission properties according to the appended groups. Previous reviews on applications of DAE-based systems did not predominantly cover all the aspects of biological and industrial implementations. They have covered only one field of application either in the biological science or in the synthetic aspect or photochromic aspects only. This review is a coalition of all those aspects in last six years. Here the variation of properties of the DAE systems with respect to structural diversifications have been discussed in detail along with their potential applications in bioimaging of cells, regulating singlet oxygen generation for photodynamic therapy and catalysis of organic reactions, and their future prospects. A tabular presentation of the photophysical properties of DAE derivatives adds to the basic understanding of this subject at a glance. We hope that this cumulative collection of contemporary research on DAE, as presented in this review, will enhance the knowledge of the readers about synthetic design anticipating their properties well in advance, and will certainly motivate researchers to generate new DAE architectures with superior chemical and biological properties in future.

Light switching for product selectivity control in photocatalysis

Artificial switchable catalysis is a new, rapidly expanding field that offers great potential advantages for both homogeneous and heterogeneous catalytic systems. Light irradiation is widely accepted as the best stimulus to artificial switchable chemical systems. In recent years, tremendous progress has been made in the synthesis and application of photo-switchable catalysts that can control when and where bond formation and dissociation take place in reactant molecules. Photo-switchable catalysis is a niche area in current catalysis, on which systematic analysis and reviews are still lacking in the scientific literature, yet it offers many intriguing and versatile applications, particularly in organic synthesis. This review aims to highlight the recent advances in photo-switchable catalyst systems that can result in two different chemical product outcomes and thus achieve a degree of control over organic synthetic reactions. Furthermore, this review evaluates different approaches that have been employed to achieve dynamic control over both the catalytic function and the selectivity of several different types of synthesis reactions, along with the remaining challenges and potential opportunities. Owing to the great diversity of the types of reactions and conditions adopted, a quantitative comparison of efficiencies between considered systems is not the focus of this review, instead the review showcases how insights from successful adopted strategies can help better harness and channel the power of photoswitchability in this new and promising area of catalysis research.

A Photoswitchable Metallocycle Based on Azobenzene: Synthesis, Characterization, and Ultrafast Dynamics

The novel photoswitchable ligand 3,3'-Azobenz(metPA)2 (1) is used to prepare a [Cu2(1)2](BF4)2 metallocycle (2), whose photoisomerization was characterized using static and time-resolved spectroscopic methods. Optical studies demonstrate the highly quantitative and reproducible photoinduced cyclic E/Z switching without decay of the complex. Accordingly and best to our knowledge, [Cu2(1)2](BF4)2 constitutes the first reversibly photoswitchable (3d)-metallocycle based on azobenzene. The photoinduced multiexponential dynamics in the sub-picosecond to few picosecond time domain of 1 and 2 have been assessed. These ultrafast dynamics as well as the yield of the respective photostationary state (PSSZ = 65 %) resemble the behavior of archetypical azobenzene. Also, the innovative pump-probe laser technique of gas phase transient photodissociation (τ-PD) in a mass spectrometric ion trap was used to determine the intrinsic relaxation dynamics for the isolated complex. These results are consistent with the results from femtosecond UV/Vis transient absorption (fs-TA) in solution, emphasizing the azobenzene-like dynamics of 2. This unique combination of fs-TA and τ-PD enables valuable insights into the prevailing interplay of dynamics and solvation. Both analyses (in solution and gas phase) and quantum chemical calculations reveal a negligible effect of the metal coordination on the switching mechanism and electronic pathway, which suggests a non-cooperative isomerization process.

Azobenzene-Integrated NHC Ligands: A Versatile Platform for Visible-Light-Switchable Metal Catalysis

A new class of photoswitchable NHC ligands, named azImBA, has been developed by integrating azobenzene into a previously unreported imidazobenzoxazol-1-ylidene framework. These rigid photochromic carbenes enable precise control over confinement around a metal's coordination sphere. As a model system, gold(I) complexes of these NHCs exhibit efficient bidirectional E-Z isomerization under visible light, offering a versatile platform for reversibly photomodulating the reactivity of organogold species. Comprehensive kinetic studies of the protodeauration reaction reveal rate differences of up to 2 orders of magnitude between the E and Z isomers of the NHCs, resulting in a quasi-complete visible-light-gated ON/OFF switchable system. Such a high level of photomodulation efficiency is unprecedented for gold complexes, challenging the current state-of-the-art in photoswitchable organometallics. Thorough investigations into the ligand properties paired with structure-reactivity correlations underscored the unique ligand's steric features as a key factor for reactivity. This effective photocontrol strategy was further validated in gold(I) catalysis, enabling in situ photoswitching of catalytic activity in the intramolecular hydroalkoxylation and -amination of alkynes. Given the significance of these findings and its potential as a widely applicable, easily customizable photoswitchable ancillary ligand platform, azImBA is poised to stimulate the development of adaptive, multifunctional metal complexes.

Switchable supramolecular helices for asymmetric stereodivergent catalysis

Despite recent developments on the design of dynamic catalysts, none of them have been exploited for the in-situ control of multiple stereogenic centers in a single molecular scaffold. We report herein that it is possible to obtain in majority any amongst the four possible stereoisomers of an amino alcohol by means of a switchable asymmetric catalyst built on supramolecular helices. Hydrogen-bonded assemblies between a benzene-1,3,5-tricarboxamide (BTA) achiral phosphine ligand coordinated to copper and a chiral BTA comonomer are engaged in a copper-hydride catalyzed hydrosilylation and hydroamination cascade process. The nature of the product stereoisomer is related to the handedness of the helices and can thus be directed in a predictable way by changing the nature of the major enantiomer of the BTA comonomer present in the assemblies. The strategy allows all stereoisomers to be obtained one-pot with similar selectivities by conducting the cascade reaction in a concomitant manner, i.e. without inverting the handedness of the helices, or sequentially, i.e. by switching the handedness of the supramolecular helices between the hydrosilylation and hydroamination steps. Supramolecular helical catalysts appear as a unique and versatile platform to control the configuration of molecules or polymers embedding several stereogenic centers.

Switchable Enantioselectivity in Conjugate Alkyne Addition of β,γ-Unsaturated α-Keto Esters by Asymmetric Binary Acid Catalysis

Switchable enantioselectivity was uncovered in the enantioselective catalytic conjugate addition of β,γ-unsaturated α-keto esters with terminal alkynes to the chiral Lewis acid complex of In(BF4)3 and chiral phosphoric acid.

Dithienylethene-Based Photoswitchable Phosphines for the Palladium-Catalyzed Stille Coupling Reaction

Homogeneous transition metal catalysis is a constantly developing field in chemical sciences. A growing interest in this area is photoswitchable catalysis, which pursues in situ modulation of catalyst activity through noninvasive light irradiation. Phosphorus ligands are excellent targets to accomplish this goal by introducing photoswitchable moieties; however, only a limited number of examples have been reported so far. In this work, we have developed a series of palladium complexes capable of catalyzing the Stille coupling reaction that contain photoisomerizable phosphine ligands based on dithienylethene switches. Incorporation of electron-withdrawing substituents into these dithienylethene moieties allows variation of the electron density on the phosphorus atom of the ligands upon light irradiation, which in turn leads to a modulation of the catalytic properties of the formed complexes and their activity in a model Stille coupling reaction. These results are supported by theoretical computations, which show that the energy barriers for the rate-determining steps of the catalytic cycle decrease when the photoswitchable phosphine ligands are converted to their closed state.

Regulating Access to Active Sites via Hydrogen Bonding and Cation-Dipole Interactions: A Dual Cofactor Approach to Switchable Catalysis

Hydrogen bonding networks are ubiquitous in biological systems and play a key role in controlling the conformational dynamics and allosteric interactions of enzymes. Yet in small organometallic catalysts, hydrogen bonding rarely controls ligand binding to the metal center. In this work, a hydrogen bonding network within a well-defined organometallic catalyst works in concert with cation-dipole interactions to gate substrate access to the active site. An ammine ligand acts as one cofactor, templating a hydrogen bonding network within a pendent crown ether and preventing the binding of strong donor ligands, such as nitriles, to the nickel center. Sodium ions are the second cofactor, disrupting hydrogen bonding to enable switchable ligand substitution reactions. Thermodynamic analyses provide insight into the energetic requirements of the different supramolecular interactions that enable substrate gating. The dual cofactor approach enables switchable catalytic hydroamination of crotononitrile. Systematic comparisons of catalysts with varying structural features provide support for the critical role of the dual cofactors in achieving on/off catalysis with substrates containing strongly donating functional groups that might otherwise interfere with switchable catalysts.

Synthesis and Characterization of a [1,2,6]Diazaphosphonine Oxide: An Example of a Photoswitchable Phosphorus-Containing Cyclic Azobenzene

We report herein the synthesis and characterization of a phosphorus-containing cyclic azobenzene as a new photoswitchable scaffold. This backbone reveals high bidirectional photoswitching yields and high thermal stability for both isomers, with t1/2 > 90 days at 60 °C. Both E- and Z-isomers have been characterized by UV-vis spectroscopy and X-ray crystallography.

Solution and Solvent-Free Stopper Exchange Reactions for the Preparation of Pillar[5]arene-containing [2] and [3]Rotaxanes

Diamine reagents have been used to functionalize a [2]rotaxane building block bearing an activated pentafluorophenyl ester stopper. Upon a first acylation, an intermediate host-guest complex with a terminal amine function is obtained. Dissociation of the intermediate occurs in solution and acylation of the released axle generates a [2]rotaxane with an elongated axle subunit. In contrast, the corresponding [3]rotaxane can be obtained if the reaction conditions are appropriate to stabilize the inclusion complex of the mono-amine intermediate and the pillar[5]arene. This is the case when the stopper exchange is performed under mechanochemical solvent-free conditions. Alternatively, if the newly introduced terminal amide group is large enough to prevent the dissociation, the second acylation provides exclusively a [3]rotaxane. On the other hand, detailed conformational analysis has been also carried out by variable temperature NMR investigations. A complete understanding of the shuttling motions of the pillar[5]arene subunit along the axles of the rotaxanes reported therein has been achieved with the help of density functional theory calculations.

Supramolecular Hydrolase Mimics in Equilibrium and Kinetically Trapped States

The folding of proteins into intricate three-dimensional structures to achieve biological functions, such as catalysis, is governed by both kinetic and thermodynamic controls. The quest to design artificial enzymes using minimalist peptides seeks to emulate supramolecular structures existing in a catalytically active state. Drawing inspiration from the nuanced process of protein folding, our study explores the enzyme-like activity of amphiphilic peptide nanosystems in both equilibrium and non-equilibrium states, featuring the formation of supramolecular nanofibrils and nanosheets. In contrast to thermodynamically stable nanosheets, the kinetically trapped nanofibrils exhibit dynamic characteristics (e.g., rapid molecular exchange and relatively weak intermolecular packing), resulting in a higher hydrolase-mimicking activity. We emphasize that a supramolecular microenvironment characterized by an optimal local polarity, microviscosity, and β-sheet hydrogen bonding is conducive to both substrate binding and ester bond hydrolysis. Our work underscores the pivotal role of both thermodynamic and kinetic control in impacting biomimetic catalysis and sheds a light on the development of artificial enzymes.

Heterobifunctional rotaxanes featuring two chiral subunits - synthesis and application in asymmetric organocatalysis

Rotaxanes can serve as scaffolds for the generation of bifunctional catalysts. We have now generated acid-base functionalized rotaxanes featuring two chiral subunits. The mechanical bond leads to increased reaction rates and also to strongly altered enantioselectivites in comparison to the non-interlocked control catalysts.

Chemical Information Processing by a Responsive Chemical System

Nature has an extraordinary capacity to precisely regulate the chemical reactivity in a highly complex mixture of molecules that is present in the cell. External stimuli lead to transient up- and downregulation of chemical reactions and provide a means for a cell to process information arriving from the environment. The development of synthetic chemical systems with life-like properties requires strategies that allow likewise control over chemical reactivity in a complex environment. Here, we show a synthetic system that mimics the initial steps that take place when a natural signal transduction pathway is activated. Monophosphate nucleosides act as chemical triggers for the self-assembly of nanoreactors that upregulate chemical reactions between reagents present at low micromolar concentrations. Different nucleotides template different assemblies and hence activate different pathways, thus establishing a distinct connection between input and output molecules. Trigger-induced upregulation of chemical reactivity occurs for only a limited amount of time because the chemical triggers are gradually removed from the system by enzymes. It is shown that the same system transiently produces different output molecules depending on the chemical input that is provided.

Bi- and tridentate coordination behaviour of a novel bis(phosphinimino)methanide ligand

Herein, we report the synthesis of a novel ferrocenyl-functionalized bis(phosphinimino)methane ligand (CH2 (PPh2 NFc)2 ). Deprotonation of CH2 (PPh2 NFc)2 with KN(SiMe3 )2 gave the dimeric species [K{CH(PPh2 NFc)2 }]2 , which was further reacted with ECl2 (E=Ge, Sn) to yield the tetrylene compounds [{CH(PPh2 NFc)2 }ECl]. The ligand and the resulting tetrylenes were examined for their electrochemical properties with the aid of cyclic voltammetry. Furthermore, the reaction of the tetrylenes [{CH(PPh2 NFc)2 }ECl] with [AuC6 F5 (tht)] resulted in the bimetallic complexes [{(AuC6 F5 )CH(PPh2 NFc)2 }ECl] with an unusual Au coordination on the ligand backbone.

Photoswitchable Enantioselective and Helix-Sense Controlled Living Polymerization

A pair of enantiomeric photoswitchable PdII catalysts, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo , were prepared via the coordination of alkyne-PdII and azobenzene-modified phosphine ligands LR-azo and LS-azo . Owing to the cis-trans photoisomerization of the azobenzene moiety, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo exhibited different polymerization activities, helix-sense selectivities, and enantioselectivities during the polymerization of isocyanide monomers under irradiation of different wavelength lights. Furthermore, the achiral isocyanide monomer A-1 could be polymerized efficiently using alkyne-PdII /LR-azo under dark condition in a living/controlled manner. Further, it generated single right-handed helical poly-A-1m (LR-azo ), confirmed by the circular dichroism spectra and atomic force microscopy images. However, the polymerization of A-1 almost could not be initiated under 420 nm light in identical conditions of dark condition. Moreover, the photoswitchable catalyst alkyne-PdII /LR-azo exhibited high enantioselectivity for the polymerization of the racemates of L-1 and D-1, respectively. D-1 was polymerized preferentially under dark condition with a D-1/L-1 rate ratio of 70, yielding single right-handed polyisocyanides. Additionally, reversible enantioselectivity was observed under 420 nm light using alkyne-PdII /LR-azo , and the calculated polymerization rate ratio of L-1/D-1 was 57 because of the isomerization of the azobenzene moiety of the catalyst. Furthermore, alkyne-PdII /LS-azo showed opposite enantioselectivity and helix-sense selectivity during the polymerization of the racemates of L-1 and D-1.

Near-Infrared Light and Acid/Base Dual-Regulated Polymerization Utilizing Imidazole-Anion-Fused Perylene Diimides as Photocatalysts

This work presents the first example of acid/base-responsive and near-infrared (NIR)-absorbing photocatalysts based on imidazole-anion-fused perylene diimide chromophores. The photocatalysts were in situ generated by deprotonation of imidazole-fused perylene diimide under an alkaline environment. NIR (λ = 730 nm, 128 mW/cm2) photoinduced atom transfer radical polymerization (ATRP) was implemented, exhibiting high efficiency and excellent livingness under ppm level of photocatalysts (15 ppm relative to monomer) and Cu(II) complex (10 ppm relative to monomer) concentrations. The method showed capabilities to polymerize behind opaque barriers (i.e., paper and pig skin) and under aerobic condition. Notably, this work demonstrated a dual temporal control of polymerization by adding weak base/acid and switching NIR light on/off. The polymerization can even be halted by bubbling CO2 and was then fully recovered by adding triethylamine. The NIR photoATRP of acrylamide monomers in aqueous solution was also performed, which can be regulated by the change of pH.

Oxygen Dependent Switchable Selectivity during Ruthenium Catalyzed Selective Synthesis of C3-Alkylated Indoles and Bis(indolyl)methanes

Herein, we report a ligand-centered redox-controlled oxygen-dependent switchable selectivity during ruthenium-catalyzed selective synthesis of C3-alkylated indoles and bis(indolyl)methanes (BIMs). A wide variety of C3-alkylated indoles and BIMs were prepared selectively in moderate to good isolated yields by coupling a wide variety of indoles and alcohols, catalyzed by a well-defined, air-stable, and easy-to-prepare Ru(II)-catalyst (1a) bearing a redox-active tridentate pincer (L1a). Catalyst 1a efficiently catalyzed the C3-alkylation of indoles under an argon atmosphere while, under an oxygen environment, exclusively producing the BIMs. A few drug molecules containing BIMs were also synthesized efficiently. 1a exhibited excellent chemoselectivity with alcohols containing internal carbon-carbon double bonds. Mechanistic investigation revealed that the coordinated azo-aromatic ligand actively participates during the catalysis. During the dehydrogenation of alcohols, the azo-moiety of the ligand stores the hydrogen removed from the alcohols and subsequently transfers the hydrogen to the alkylideneindolenine intermediate, forming the C3-alkylated indoles. While under an oxygen environment, the transfer of hydrogen from the ligand scaffold to the molecular oxygen generates H2O2, leaving no scope for hydrogenation of the alkylideneindolenine intermediate, rather than it undergoing 1,4-Michael-type addition forming the BIMs.

Switchable Organocatalysis from N-heterocyclic Carbene-Carbodiimide Adducts with Tunable Release Temperature

N-Heterocyclic carbenes (NHCs) are powerful organocatalysts, but practical applications often require in situ generation from stable precursors that "mask" the NHC reactivity via reversible binding. Previously established "masks" are often simple small molecules, such that the NHC structure is used to control both catalytic activity and activation temperature, leading to undesirable tradeoffs. Herein, we show that NHC-carbodiimide (CDI) adducts can be masked precursors for switchable organocatalysis and that the CDI substituents can control the reaction profile without changing the NHC structure. Large electronic variations on the CDI (e.g., alkyl versus aryl) drastically change the catalytically active temperature, whereas smaller perturbations (e.g., different para-substituted phenyls) tune the catalyst release within a narrower window. This control was demonstrated for three classic NHC-catalyzed reactions, each influencing the NHC-CDI equilibrium in different ways. Our results introduce a new paradigm for controlling NHC organocatalysis as well as present practical considerations for designing appropriate masks for various reactions.

Tuning the Catalytic Activity of a Pincer Complex of Rhodium(I) by Supramolecular and Redox Stimuli

We report the rhodium(I) complex [Rh(CNC-NDI)(CO)]+ , in which CNC-NDI refers to a pincer-CNC ligand decorated with a naphthalenediimide moiety. Due to the presence of the planar CNC ligand and the naphthalenediimide moiety, the electronic nature of the complex can be modulated by means of supramolecular and redox stimuli, respectively. The metal complex shows a strong π-π-stacking interaction with coronene. This interaction has an impact on the electron-richness of the metal, as demonstrated by the shifting of the ν(CO) stretching band to a lower frequency. The addition of tetrabutylammonium fluoride facilitates the sequential one- and two-electron reduction of the NDI moiety of the ligand, thus resulting in a situation in which the ligand can increase its electron-donor strength in two levels. The nature of the interaction with the fluoride anion was studied computationally. The catalytic activity of the [Rh(CNC-NDI)(CO)]+ complex was tested in the cycloisomerization of alkynoic acids, where it is observed that the activity of the catalyst can be modulated between four levels of activity, which correspond to i) the use of the unmodified catalyst, ii) catalyst+coronene, iii) catalyst+2 equivalents of fluoride, and iv) catalyst+5 equivalents of fluoride.

Adaptive Catalysts for the Selective Hydrogenation of Bicyclic Heteroaromatics using Ruthenium Nanoparticles on a CO2 -Responsive Support

Ruthenium nanoparticles (NPs) immobilized on an amine-functionalized polymer-grafted silica support act as adaptive catalysts for the hydrogenation of bicyclic heteroaromatics. Whereas full hydrogenation of benzofuran and quinoline derivatives is achieved under pure H2 , introducing CO2 into the H2 gas phase leads to an effective shutdown of the arene hydrogenation while preserving the activity for the hydrogenation of the heteroaromatic part. The selectivity switch originates from the generation of ammonium formate species on the surface of the materials by catalytic hydrogenation of CO2 . The CO2 hydrogenation is fully reversible, resulting in a robust and rapid switch between the two states of the catalyst adapting its performance in response to the feed gas composition. A variety of benzofuran and quinoline derivatives were hydrogenated to fully or partially saturated products in high selectivity and yields simply by altering the composition of the feed gas from H2 to H2 /CO2 . The adaptive catalytic system thus provides controlled access to valuable products using a single catalyst rather than two specific and distinct catalysts with static reactivity.

Interplay between anti-anti and syn-anti conformations of thiourea modulating ON-OFF catalysis

The design, synthesis and operation of a readily accessible two-state switch are demonstrated. The switch initially exists in an intramolecularly hydrogen-bonded self-locked state, as evidenced by the solution-state NMR and solid-state structure. The switch can be reversibly altered between anti-anti and syn-anti conformations by adding and removing Cu+ ions, as evidenced by the NMR and crystallographic study. The anti-anti form was found to be catalytically active in the Michael addition reaction, whereas the syn-anti form was catalytically inactive.

Reversal of Enantioselectivity for the Desymmetrization of meso-1,2-Diols Catalyzed by Pyridine-N-oxides

The desymmetrization of meso-vic-diols with a reversal of enantioselectivity catalyzed by chiral pyridine-N-oxides with l-proline as a single source of chirality is reported. With chiral 3-substituted ArPNO C2c and 2-substituted 4-(dimethylamino)pyridine-N-oxide C3b as catalysts, a wide range of monoesters were obtained with satisfactory results with a complete and controlled switch in stereoselectivity (up to 97:3 and 1:99 er). Chiral six-membered carbocyclic uracil nucleosides were generated with excellent enantioselectivities after derivatization. A series of control experiments and density functional theory (DFT) calculations supported that the reaction proceeded in a bifunctional activated manner, where the N-oxide groups and N-H proton of the amides were vital for catalytic reactivity and stereocontrol. The DFT calculation also supported the distance-directed switching of enantioselectivity, in which the l-prolinamide moiety moved from the C3 to C2 position on the pyridine ring, resulting in the H-bond interaction between the amide N-H and OH group of meso-vic-diol also shifted from one hydroxyl group to another.

Photoswitchable electron-rich phosphines: using light to modulate the electron-donating ability of phosphines

The synthesis and properties of photoswitchable electron-rich phosphines containing N-heterocyclic imines equipped with a photochromic dithienylethene unit are reported. Heteronuclear NMR spectroscopy and UV/vis studies reveal that the imine substituents undergo reversible electrocyclic ring-closing and ring-opening reactions upon exposure to UV and visible light, respectively. The photoisomerization alters the electron-donating ability of the phosphines by up to ΔTEP = 8 cm-1.

Synthesis and Characterization of Photoswitchable Dithienylethene-Based Chiral Bisoxazoline Compounds with Bidirectional Visible-Light Control

In this paper, we have successfully synthesized dithienylethene-based chiral bisoxazoline ligands with bidirectional photoswitching capabilities under visible light irradiation and proposed a strategy for adjusting the conjugation system length in sensitizer groups. The detailed experimental procedures and the characterization data are presented in the main text and the Supporting Information. Despite their moderate photoswitching rates, these ligands provide a promising approach towards developing fully visible light-responsive chiral catalysts.

A catalytically active oscillator made from small organic molecules

Oscillatory systems regulate many biological processes, including key cellular functions such as metabolism and cell division, as well as larger-scale processes such as circadian rhythm and heartbeat1-4. Abiotic chemical oscillations, discovered originally in inorganic systems5,6, inspired the development of various synthetic oscillators for application as autonomous time-keeping systems in analytical chemistry, materials chemistry and the biomedical field7-17. Expanding their role beyond that of a pacemaker by having synthetic chemical oscillators periodically drive a secondary function would turn them into significantly more powerful tools. However, this is not trivial because the participation of components of the oscillator in the secondary function might jeopardize its time-keeping ability. We now report a small molecule oscillator that can catalyse an independent chemical reaction in situ without impairing its oscillating properties. In a flow system, the concentration of the catalytically active product of the oscillator shows sustained oscillations and the catalysed reaction is accelerated only during concentration peaks. Augmentation of synthetic oscillators with periodic catalytic action allows the construction of complex systems that, in the future, may benefit applications in automated synthesis, systems and polymerization chemistry and periodic drug delivery.

Supramolecular Regulation of Catalytic Activity in Molecularly Responsive Catalysts

Some enzymes switch between an open form and a closed form. We report a molecularly tuned catalyst that accommodates a substrate and a signal molecule simultaneously. Binding of the signal molecule helps direct the reactive group of the substrate to the catalytic group and enhances the catalytic activity. Subtle structural changes in either the substrate or the signal molecule are readily detected. The switching mechanism also allows the catalytic reaction to be turned on and off reversibly by specific molecular signals.

Reversible Modulation of the Electronic and Spatial Environment around Ni(0) Centers Bearing Multifunctional Carbene Ligands with Triarylaluminum

Designing and modulating the electronic and spatial environments surrounding metal centers is a crucial issue in a wide range of chemistry fields that use organometallic compounds. Herein, we demonstrate a Lewis-acid-mediated reversible expansion, contraction, and transformation of the spatial environment surrounding nickel(0) centers that bear N-phosphine oxide-substituted N-heterocyclic carbenes (henceforth referred to as (S)PoxIms). Reaction between tetrahedral (syn-κ-C,O-(S)PoxIm)Ni(CO)₂ and Al(C₆F₅)₃ smoothly afforded heterobimetallic Ni/Al species such as trigonal-planar {κ-C-Ni(CO)₂}(μ-anti-(S)PoxIm){κ-O-Al(C₆F₅)₃} via a complexation-induced rotation of the N-phosphine oxide moieties, while the addition of 4-dimethylaminopyridine resulted in the quantitative regeneration of the former Ni complexes. The corresponding interconversion also occurred between (SPoxIm)Ni(η²:η²-diphenyldivinylsilane) and {κ-C-Ni(η²:η²-diene)}(μ-anti-SPoxIm){κ-O-Al(C₆F₅)₃} via the coordination and dissociation of Al(C₆F₅)₃. The shape and size of the space around the Ni(0) center was drastically changed through this Lewis-acid-mediated interconversion. Moreover, the multinuclear NMR, IR, and XAS analyses of the aforementioned carbonyl complexes clarified the details of the changes in the electronic states on the Ni centers; i.e., the electron delocalization was effectively enhanced among the Ni atom and CO ligands in the heterobimetallic Ni/Al species. The results presented in this work thus provide a strategy for reversibly modulating both the electronic and spatial environment of organometallic complexes, in addition to the well-accepted Lewis-base-mediated ligand-substitution methods.

Supramolecular Complexation of Azobenzene Dyes by Cucurbit[7]uril

This report describes cucurbit[7]uril (CB7) complexation of azobenzene dyes that have a 4-(N,N'-dimethylamino) or 4-amino substituent. Absorption and NMR data show that CB7 encapsulates the protonated form of the azobenzene and that the complexed dye exists as its azonium tautomer with a trans azo conformation and substantial quinoid resonance character. Because CB7 complexation stabilizes the dye conjugate acid, there is an upward shift in its pKa, and in one specific case, the pKa of the protonated azobenzene is increased from 3.09 to 4.47. Molecular modeling indicates that the CB7/azobenzene complex is stabilized by three major noncovalent factors: (i) ion-dipole interactions between the partially cationic 4-(N,N'-dimethylamino) or 4-amino group on the encapsulated protonated azobenzene and the electronegative carbonyl oxygens on CB7, (ii) inclusion of the upper aryl ring of the azobenzene within the hydrophobic CB7 cavity, and (iii) a hydrogen bond between the proton on the azo nitrogen and CB7 carbonyls. CB7 complexation enhances azobenzene stability and increases azobenzene hydrophilicity; thus, it is a promising way to improve azobenzene performance as a pigment or prodrug. In addition, the striking yellow/pink color change that accompanies CB7 complexation can be exploited to create azobenzene dye displacement assays with naked eye detection.

A photoresponsive gold catalyst based on azobenzene-functionalized NHC ligands

An azobenzene-bearing N-heterocyclic carbene-based gold catalyst is reported of which the reactivity in a cyclization reaction depends on the isomeric state of the azobenzene. The configurations of the catalyst can be reversibly switched by light and are stable during the reaction, effectively leading to a switchable catalyst system.

Accounts of applied molecular rotors and rotary motors: recent advances

Molecular machines are nanoscale devices capable of performing mechanical works at molecular level. These systems could be a single molecule or a collection of component molecules that interrelate with one another to produce nanomechanical movements and resulting performances. The design of the components of molecular machine with bioinspired traits results in various nanomechanical motions. Some known molecular machines are rotors, motors, nanocars, gears, elevators, and so on based on their nanomechanical motion. The conversion of these individual nanomechanical motions to collective motions via integration into suitable platforms yields impressive macroscopic output at varied sizes. Instead of limited experimental acquaintances, the researchers demonstrated several applications of molecular machines in chemical transformation, energy conversion, gas/liquid separation, biomedical use, and soft material fabrication. As a result, the development of new molecular machines and their applications has accelerated over the previous two decades. This review highlights the design principles and application scopes of several rotors and rotary motor systems because these machines are used in real applications. This review also offers a systematic and thorough overview of current advancements in rotary motors, providing in-depth knowledge and predicting future problems and goals in this area.

Enhanced catalytic performance derived from coordination-driven structural switching between homometallic complexes and heterometallic polymeric materials

A bifunctional ligand 4,4-dimethyl-1-(pyridin-4-yl)pentane-1,3-dione (HL) able to provide two distinct coordination sites, i.e. anionic β-diketonate (after deprotonation) and neutral pyridine, has been used in the synthesis of Ag(I), Pd(II) and Pt(II) complexes that then have been applied as metalloligands for the construction of new heterometallic polymeric materials. The ambidentate nature of L- enables switching between different modes of coordination within mononuclear complexes or their conversion into polymeric species in a fully controllable way. The coordination-driven processes can be triggered by various stimuli, i.e. a metal salt addition or acid-base equilibria, and presents an efficient strategy for the generation of metallosupramolecular materials. As a consequence of self-assembly, new multimetallic coordination aggregates have been synthesized and characterized in depth in solution (¹H NMR, ESI-MS) as well as in the solid state (XPS, SEM-EDS, FTIR, pXRD, TGA). Furthermore, the Pd-based assemblies have been found to be efficient catalyst precursors in the Heck cross-coupling reaction, demonstrating a direct impact of compositional and morphological differences on their catalytic activity.

Tunable and Switchable Catalysis Enabled by Cation-Controlled Gating with Crown Ether Ligands

ConspectusCatalysis has become an essential tool in science and technology, impacting the discovery of pharmaceuticals, the manufacture of commodity chemicals and plastics, the production of fuels, and much more. In most cases, a particular catalyst is optimized to mediate a particular reaction, continually producing a desired product at a given rate. There is enormous opportunity in developing catalysts that are dynamic, capable of responding to a change in the environment to alter structure and function. Controlled catalysis, in which the activity or selectivity of a catalytic reaction can be adjusted through an external stimulus, offers opportunities for innovation in catalysis. Catalyst discovery could be simplified if a single thoughtfully designed complex could work synergistically with additives to optimize performance rather than trying a multitude of different metal/ligand combinations. Temporal control could be gained to facilitate the execution of multiple reactions in the same flask, for example, by activating one catalyst and deactivating another to avoid incompatibilities. Selectivity switching could enable copolymer synthesis with well-defined chemical and material properties. These applications might sound futuristic for synthetic catalysts, but in nature, such a degree of controlled catalysis is commonplace. For example, allosteric interactions and/or feedback loops modulate enzymatic activity to enable complex small-molecule synthesis and sequence-defined polymerization reactions in complex mixtures containing many catalytic sites. In many cases, regulation is achieved by "gating" substrate access to the active site. Fundamental advances in catalyst design are needed to better understand the factors that enable controlled catalysis in the arena of synthetic chemistry, particularly in achieving substrate gating outside of macromolecular environments. In this Account, the development of design principles for achieving cation-controlled catalysis is described. The guiding hypothesis was that gating substrate access to a catalyst site could be achieved by controlling the dynamics of a hemilabile ligand through secondary Lewis acid/base and/or cation-dipole interactions. To enforce such interactions, catalysts sitting at the interface of organometallic catalysis and supramolecular chemistry were designed. A macrocyclic crown ether was incorporated into a robust organometallic pincer ligand, and these "pincer-crown ether" ligands have been explored in catalysis. Complementary studies of controlled catalysis and detailed mechanistic analysis guided the development of iridium, nickel, and palladium pincer-crown ether catalysts capable of substrate gating. Toggling the gate between open and closed states leads to switchable catalysis, where cation addition/removal changes the turnover frequency or the product selectivity. Varying the degree of gating leads to tunable catalysis, where the activity can be tuned based on the identity and amount of salt added. Research has focused on reactions of alkenes, particularly isomerization reactions, which has in turn led to design principles for cation-controlled catalysts.

Optically Controlled Recovery and Recycling of Homogeneous Organocatalysts Enabled by Photoswitches

We address a critical challenge of recovering and recycling homogeneous organocatalysts by designing photoswitchable catalyst structures that display a reversible solubility change in response to light. Initially insoluble catalysts are UV-switched to a soluble isomeric state, which catalyzes the reaction, then back-isomerizes to the insoluble state upon completion of the reaction to be filtered and recycled. The molecular design principles that allow for the drastic solubility change over 10 times between the isomeric states, 87 % recovery by the light-induced precipitation, and multiple rounds of catalyst recycling are revealed. This proof of concept will open up opportunities to develop highly recyclable homogeneous catalysts that are important for the synthesis of critical compounds in various industries, which is anticipated to significantly reduce environmental impact and costs.

Electronic Influences on the Dynamic Range of Photoswitchable Dithienylethene-Thiourea Organocatalysts

Thiourea-based organocatalysts bearing a photoswitchable dithienylethene (DTE) core and a wide range of substituents were prepared and extensively tested for their ability to accelerate the Michael reaction between acetylacetone and trans-β-nitrostyrene. There is a strong correlation between the Hammett parameter of the modulating groups and catalytic activity following UV irradiation. Electron-withdrawing groups afford the largest reactivity difference between the catalysts in their ring-open form and their ring-closed isomer, with evidence for electronic coupling between the two halves in both oDTE and cDTE.

Selective Binding and Isomerization of Oximes in a Self-Assembled Capsule

A series of straight-chain (C7-C13) alkyl-O-methyl aldoximes (R-C(H)═NOMe) were synthesized with various functional groups at the remote ends (alkenes, halogen, -COOH, and NH₂). Their isomers about the C═N bond showed ∼60-40% E-Z-ratio in organic solutions. Surprisingly, their confinement in a water-soluble capsule with benzoselenodiazole walls shows high selectivity for the cis-/Z-isomer. Their relative affinities for the chalcogen-bonded capsule at room temperature depend mainly on the guest chain length and functional groups. A chain length of 14 heavy atoms showed especially high E- to Z-isomer selectivity (>99%) and was used in separation. The E-Z isomerization occurred only in the capsular cavity at room temperature and was accelerated 10-fold by sonication. The Z-isomer selective binding, separation, and E-Z isomerization are supported by NMR, DOSY, and computational studies.

Transient self-assembly of metal-organic complexes

Implementing transient processes in networks of dynamic molecules holds great promise for developing new functional behaviours. Here we report that trichloroacetic acid can be used to temporarily rearrange networks of dynamic imine-based metal complexes towards new equilibrium states, forcing them to express complexes otherwise unfavourable in their initial equilibrium states. Basic design principles were determined for the creation of such networks. Where a complex distribution of products was obtained in the initial equilibrium state of the system, the transient rearrangement temporarily yielded a simplified output, forcing a more structured distribution of products. Where a single complex was obtained in the initial equilibrium state of the system, the transient rearrangement temporarily modified the properties of this complex. By doing so, the mechanical properties of an helical macrocyclic complex could be temporarily altered by rearranging it into a [2]catenane.

Asymmetric Binary Acid Catalysis: Switchable Enantioselectivity in Enantioselective Conjugate Hydride Reduction

The exchange of the metal ion from Zr(IV) to Fe(III) leads to a switch in the enantioselectivity of binary acid-catalyzed conjugate hydride reductions. In the presence of Hantzsch ester, γ-indolyl β,γ-unsaturated α-keto esters could be reduced to the desired (S)- or (R)-products, respectively, with good to excellent enantioselectivity (up to 98% ee).

Light-switched selective catalysis with NADH mimic functionalized metal-organic capsules

By incorporating an active site model of nicotinamide adenine dinucleotide (NADH) as an electron regulator, a redox-active metal-organic capsule as an efficient photocatalyst was obtained for the light switchable synthesis of a series of aromatic azoxy and amino compounds from their corresponding nitroaromatics under either purple (420 nm) or blue (455 nm) LED light irradiation.

Switchable catalysis and CO2 sensing by reduction resistant, luminescent copper-thiolate complexes

Metal-thiolate complexes have been the focus of research for several years because of their unique photophysical properties and their use as a precursor for synthesizing various well-defined metal nanoclusters. A rational understanding of their structure-property relationship is necessary to realize their full potential in practical applications. Herein, we demonstrate the synthesis of a unique copper-thiolate complex with reversibly switchable catalytic and photoluminescence (PL) properties. The as-synthesized complex at basic pH (Complex B) showed cyan PL with a strong peak at ∼488 nm (cyan) and a small shoulder peak at ∼528 nm (green). When the pH of the complex was changed to acidic (Complex A), the PL was switched to light green. Such pH-responsive PL properties were demonstrated to be useful for pH and CO₂ sensing. The switchable properties originate from their two distinct structural states at two different pHs. We found that Complex A was resistant to high concentrations of a strong reducing agent, and had an intermediate oxidation state of copper (Cu⁺) with good thermodynamic stability. Furthermore, the switchable catalytic property was investigated with a 4-nitrophenol reduction and 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction. The reduction kinetics followed pseudo-first-order, where the catalytic activity was enhanced by more than 10³ times when Complex B was switched to Complex A. A similar trend was also observed for TMB oxidation. Our design strategy demonstrates that redox switchable metal-thiolate complexes could be a powerful candidate for a plethora of applications.

Exploring the Gas-Phase Formation and Chemical Reactivity of Highly Reduced M8 L6 Coordination Cages

Coordination cages with well-defined cavities show great promise in the field of catalysis on account of their unique combination of molecular confinement effects and transition-metal redox chemistry. Here, three coordination cages are reduced from their native 16⁺ oxidation state to the 2⁺ state in the gas phase without observable structural degradation. Using this method, the reaction rate constants for each reduction step were determined, with no noticeable differences arising following either the incorporation of a C₆₀ -fullerene guest or alteration of the cage chemical structure. The reactivity of highly reduced cage species toward molecular oxygen is "switched-on" after a threshold number of reduction steps, which is influenced by guest molecules and the structure of cage components. These new experimental approaches provide a unique window to explore the chemistry of highly-reduced cage species that can be modulated by altering their structures and encapsulated guest species.

Cucurbit[10]uril-Based Orthogonal Supramolecular Polymers with Host-Guest and Coordination Interactions and Its Applications in Anion Classification

A novel orthogonal supramolecular polymer (Q[10]-TPDPB-Lu³⁺) in a host-guest ratio of 2:1 was successfully constructed utilizing the specificity and excellent cavity matching of Q[10] with the tripyridine derivatives (TPDPB). Significantly, non-covalent interactions between Q[10]'s hydrophobic cavities and Lu³⁺ were used to induce charge transfer of TPDPB to TPDPB and TPDPB to Lu³⁺, resulting in the construction of structurally interesting orthogonal assemblies with excellent fluorescence properties. Finally, the Q[10]-TPDPB-Lu³⁺ assemblies were shown to have good recognition and classification of strong and weak acid anions as well as iodide anions, and the classification was accompanied by a clear fluorescence emission change allowing visual observation.

"Vermellogens" and the Development of CB[8]-Based Supramolecular Switches Using pH-Responsive and Non-Toxic Viologen Analogues

We present herein the "vermellogens", a new class of pH-responsive viologen analogues, which replace the direct linking between para-substituted pyridinium moieties within those by a hydrazone functional group. A series of such compounds have been efficiently synthesized in aqueous media by hydrazone exchange reactions, displaying a marked pH-responsivity. Furthermore, the parent N,N'-dimethylated "vermellogen": the "red thread", an analogue of the herbicide paraquat and used herein as a representative model of the series, showed anion-recognition abilities, non-reversible electrochemical behavior, and non-toxicity of the modified bis-pyridinium core. The host-guest chemistry for the "red thread" with the CB[7,8] macrocyclic receptors has been extensively studied experimentally and by dispersion corrected density functional theory methods, showing a parallel behavior to that previously described for the herbicide but, crucially, swapping the well-known redox reactive capabilities of the viologen-based inclusion complexes by acid-base supramolecular responsiveness.

Switchable aqueous catalytic systems for organic transformations

In living organisms, enzyme catalysis takes place in aqueous media with extraordinary spatiotemporal control and precision. The mechanistic knowledge of enzyme catalysis and related approaches of creating a suitable microenvironment for efficient chemical transformations have been an important source of inspiration for the design of biomimetic artificial catalysts. However, in "nature-like" environments, it has proven difficult for artificial catalysts to promote effective chemical transformations. Besides, control over reaction rate and selectivity are important for smart application purposes. These can be achieved via incorporation of stimuli-responsive features into the structure of smart catalytic systems. Here, we summarize such catalytic systems whose activity can be switched 'on' or 'off' by the application of stimuli in aqueous environments. We describe the switchable catalytic systems capable of performing organic transformations with classification in accordance to the stimulating agent. Switchable catalytic activity in aqueous environments provides new possibilities for the development of smart materials for biomedicine and chemical biology. Moreover, engineering of aqueous catalytic systems can be expected to grow in the coming years with a further broadening of its application to diverse fields.

Enantiodivergent epoxidation of alkenes with a photoswitchable phosphate manganese-salen complex

The development of enantiodivergent catalysts capable of preparing both enantiomeric products from one substrate in a controlled fashion is challenging. Introducing a switching function into the catalyst can address this challenge, allowing the chiral reaction environment to reversibly change during catalysis. Here we report a photoswitchable phosphate ligand, derived from 2,2'-biphenol, which axially coordinates as the counter ion to an achiral manganese(III) salen catalyst, providing the latter with the ability to switch stereoselectivity in the epoxidation of alkenes. The enantiomers of the chiral ligand exist as a pair of pseudo-enantiomers, which can be interconverted by irradiation with light of different wavelengths. The opposite axial chirality of these pseudo-enantiomers is efficiently transferred to the manganese(III) salen catalyst. With this switchable supramolecular catalyst, the enantioselectivity of the epoxidation of a variety of alkenes can be controlled, resulting in opposite enantiomeric excesses of the epoxide products. This transfer of chirality from a photoswitchable anionic ligand to a metal complex broadens the scope of supramolecular catalysts.

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations

Organocatalysis has evolved into an effective complement to metal‐ or enzyme‐based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition‐metal‐based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition‐metal‐free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Recent Advances in Fuel-Driven Molecular Switches and Machines

The molecular switches and machines arena has entered a new phase in which molecular machines operate under out-of-equilibrium conditions using appropriate fuel. Unlike the equilibrium version, the dissipative off-equilibrium machines necessitate only one stimulus input to complete each cycle and decrease chemical waste. Such a modus operandi would set significant steps towards mimicking the natural machines and may offer a platform for advancing new applications by providing temporal control. This review summarises the recent progress and blueprint of autonomous fuel-driven off-equilibrium molecular switches and machines.