Preparation of PdNi bimetallic loaded amino modified porous carbon material catalyst based on chitosan and its applications

The utilization efficiency of palladium-based catalysts has sharply increased in many catalytic reactions. However, numerous studies have shown that preparing alloys of palladium with other metals has superior catalytic activity than pure palladium. Additionally, hierarchical porous carbon has gradually developed into an excellent carrier for loading bimetallic nanoparticles. In this study, we firstly pyrolyzed chitosan, sodium bicarbonate and nickel nitrate to create highly dispersed porous carbon materials doped with Ni NPs. The carbon materials were then grafted with silane coupling agent (APTMS) to afford them with amino groups on the surface. Taking advantage of the fact that Pd2+ can react with Ni in spontaneous reduction reaction, Pd was deposited on the surface of Ni to produce PdNi bimetallic-loaded carbon catalysts containing amino groups. The resulting catalysts were examined by a series of characterizations and were found to have a hierarchically porous structure and large specific surface area, which increased the number of active sites of the catalysts. In comparison to other Pd catalysts, the PdNi/HPCS-NH2 catalysts displayed remarkable activity for Suzuki coupling reaction and hydro reduction of nitroaromatics, which exhibited a high turnover frequency value (TOF) of 37,857 h-1 and 680.9 h-1, respectively. These were mainly due to the high dispersion of the PdNi NPs and the superior structure of the carriers. Moreover, the catalysts did not experience a significant decline in activity after ten cycles. All in all, this investigation has created a new approach for the fabrication of novel carriers for Pd catalysts, which is in line with the concept of green chemistry and recyclable.

Design and Understanding of Adaptive Hydrogenation Catalysts Triggered by the H2/CO2-Formic Acid Equilibrium

An adaptive catalytic system for selective hydrogenation was developed exploiting the H2 + CO2 ⇔  HCOOH equilibrium for reversible, rapid, and robust on/off switch of the ketone hydrogenation activity of ruthenium nanoparticles (Ru NPs). The catalyst design was based on mechanistic studies and DFT calculations demonstrating that adsorption of formic acid to Ru NPs on silica results in surface formate species that prevent C═O hydrogenation. Ru NPs were immobilized on readily accessible silica supports modified with guanidinium-based ionic liquid phases (Ru@SILPGB) to generate in situ sufficient amounts of HCOOH when CO2 was introduced into the H2 feed gas for switching off ketone hydrogenation while maintaining the activity for hydrogenation of olefinic and aromatic C═C bonds. Upon shutting down the CO2 supply, the C═O hydrogenation activity was restored in real time due to the rapid decarboxylation of the surface formate species without the need for any changes in the reaction conditions. Thus, the newly developed Ru@SILPGB catalysts allow controlled and alternating production of either saturated alcohols or ketones from unsaturated substrates depending on the use of H2 or H2/CO2 as feed gas. The major prerequisite for design of adaptive catalytic systems based on CO2 as trigger is the ability to shift the H2 + CO2 ⇔  HCOOH equilibrium sufficiently to exploit competing adsorption of surface formate and targeted functional groups. Thus, the concept can be expected to be more generally applicable beyond ruthenium as the active metal, paving the way for next-generation adaptive catalytic systems in hydrogenation reactions more broadly.

Surface-Enriched Room-Temperature Liquid Bismuth for Catalytic CO2 Reduction

Bismuth-based electrocatalysts are effective for carbon dioxide (CO2) reduction to formate. However, at room temperature, these materials are only available in solid state, which inevitably suffers from surface deactivation, declining current densities, and Faradaic efficiencies. Here, the formation of a liquid bismuth catalyst on the liquid gallium surface at ambient conditions is shown as its exceptional performance in the electrochemical reduction of CO2 (i.e., CO2RR). By doping a trace amount of bismuth (740 ppm atomic) in gallium liquid metal, a surface enrichment of bismuth by over 400 times (30 at%) in liquid state is obtained without atomic aggregation, achieving 98% Faradic efficiency for CO2 conversion to formate over 80 h. Ab initio molecular simulations and density functional theory calculations reveal that bismuth atoms in the liquid state are the most energetically favorable sites for the CO2RR intermediates, superior to solid Bi-sites, as well as joint GaBi-sites. This study opens an avenue for fabricating high-performing liquid-state metallic catalysts that cannot be reached by elementary metals under electrocatalytic conditions.

Transition metal pincer catalysts for formic acid dehydrogenation: a mechanistic perspective

The storage and transportation of hydrogen gas, a non-polluting alternative to carbon-based fuels, have always been challenging due to its extreme flammability. In this regard, formic acid (FA) is a promising liquid organic hydrogen carrier (LOHC), and over the past decades, significant progress has been made in dehydrogenating FA through transition metal catalysis. In this review, our goal is to provide a detailed insight into the existing processes to expose various mechanistic challenges associated with FA dehydrogenation (FAD). Specifically, methodologies catalyzed by pincer-ligated metal complexes were chosen. Pincer ligands are preferred as they provide structural rigidity to the complexes, making the isolation and analysis of reaction intermediates less challenging and consequently providing a better mechanistic understanding. In this perspective, the catalytic activity of the reported pincer complexes in FAD was overviewed, and more importantly, the catalytic cycles were examined in detail. Further attention was given to the structural modifications, role of additives, reaction medium, and their crucial effects on the outcome.

Development of a practical formate/bicarbonate energy system

Liquid (organic) hydrogen carriers ([18H]-dibenzyltoluene, MeOH, formic acid, etc.) form a toolbox for the storage and transport of green hydrogen, which is crucial for the implementation of renewable energy technologies. Simple organic salts have been scarcely investigated for this purpose, despite many advantages such as low cost and minor toxicity, as well as easy handling. Here, we present a potassium formate/potassium bicarbonate hydrogen storage and release energy system, that is applicable and shows high stability (6 months). Utilizing ppm amounts of the molecularly defined Ru-5 complex, hydrogen release rates of up to 9.3 L h-1 were achieved. The same catalyst system promoted the hydrogenation of KHCO3 to HCOOK with a TON of 9650. In this way, combined hydrogen storage-release cycles can be performed for 40 times.

Porous Bi Nanosheets Derived from β-Bi2O3 for Efficient Electrocatalytic CO2 Reduction to Formate

The electrochemical CO2 reduction reaction (ECO2RR) is a promising strategy for converting CO2 into high-value chemical products. However, the synthesis of effective and stable electrocatalysts capable of transforming CO2 into a specified product remains a huge challenge. Herein, we report a template-regulated strategy for the preparation of a Bi2O3-derived nanosheet catalyst with abundant porosity to achieve the expectantly efficient CO2-to-formate conversion. The resultant porous bismuth nanosheet (p-Bi) not only exhibited marked Faradaic efficiency of formate (FEformate), beyond 91% in a broad potential range from -0.75 to -1.1 V in the H-type cell, but also demonstrated an appreciable FEformate of 94% at a high current density of 262 mA cm-2 in the commercially important gas diffusion cell. State-of-the-art X-ray absorption near edge structure spectroscopy (XANES) and theoretical calculation unraveled the distinct formate production performance of the p-Bi catalyst, which was cocontributed by its smaller size, plentiful porous structure, and stronger Bi-O bond, thus accelerating the absorption of CO2 and promoting the subsequent formation of intermediates. This work provides an avenue to fabricate bismuth-based catalysts with high planar and porous morphologies for a broad portfolio of applications.

THF-Assisted CO2 Reduction Catalyzed by Electride Mg2EP: Insight from DFT Calculations

Hydroboration and hydrogenation reductions of CO2 catalyzed by a porphyrinoid-based dimagnesium(I) electride (Mg2EP) were investigated by density functional theory calculations. Herein, the presence of potentially excess electrons located at the Mg-Mg bond endows Mg2EP with the ability to activate small molecules such as CO2, HBpin, and H2, thus opening up the possibility for further CO2 conversion. The Mg2EP-catalyzed hydroboration of CO2 to HCOOBpin is predicted to have relatively higher activity in comparison to the hydrogenation reduction to formic acid (HCOOH). Interestingly, the common solvent molecule tetrahydrofuran as an auxiliary can coordinate with the Mg center to effectively weaken the bonding interaction between the dimagnesium center and the intermediate species from the CO2 conversion, thereby promoting the catalytic cycle for the CO2 hydroboration. The present results suggest that the electride Mg2EP is promising for the molecular catalyst in the CO2 transformation.

Electrolytic Hydrogen Release from Hydrogen Boride Sheets

Solid-state hydrogen storage materials are safe and lightweight hydrogen carriers. Among the various solid-state hydrogen carriers, hydrogen boride (HB) sheets possess a high gravimetric hydrogen capacity (8.5 wt%). However, heating at high temperatures and/or strong ultraviolet illumination is required to release hydrogen (H2) from HB sheets. In this study, the electrochemical H2 release from HB sheets using a dispersion system in an organic solvent without other proton sources is investigated. H2 molecules are released from the HB sheets under the application of a cathodic potential. The Faradaic efficiency for H2 release from HB sheets reached >90%, and the onset potential for H2 release is -0.445 V versus Ag/Ag+, which is more positive than those from other proton sources, such as water or formic acid, under the same electrochemical conditions. The total electrochemically released H2 in a long-time experiment reached ≈100% of the hydrogen capacity of HB sheets. The H2 release from HB sheets is driven by a small bias; thus, they can be applied as safe and lightweight hydrogen carriers with economical hydrogen release properties.

Plasmon-Switched Kinetics for Formic Acid Dehydrogenation: Selective Adsorption Driven by Local Field and Hot Carriers

Understanding illumination-mediated kinetics is essential for catalyst design in plasmon catalysis. Here we prepare Pd-based plasmonic catalysts with tunable electronic structures to reveal the underlying illumination-enhanced kinetic mechanisms for formic acid (HCOOH) dehydrogenation. We demonstrate a kinetic switch from a competitive Langmuir-Hinshelwood adsorption mode in dark to a non-competitive type under irradiation triggered by local field and hot carriers. Specifically, the electromagnetic field induces a spatial-temporal separation of dehydrogenation-favorable configurations of reactant molecule HCOOH and HCOO- due to their natural different polarities. Meanwhile, the generated energetic carriers can serve as active sites for selective molecular adsorption. The hot electrons act as adsorption sites for HCOOH, while holes prefer to adsorb HCOO-. Such unique non-competitive adsorption kinetics induced by plasmon effects serves as another typical characteristic of plasmonic catalysis that remarkably differs from thermocatalysis. This work unravels unique adsorption transformations and a kinetic switching driven by plasmon nonthermal effects.

Molybdenum-catalyzed hydrogenation of carbon dioxide, bicarbonate, and inorganic carbonates to formates

Herein, we report the hydrogenation of carbon dioxide to sodium formate catalyzed by low-valent molybdenum phosphine complexes. The 1,3-bis(diphenylphosphino)propane (DPPP)-based Mo complex was found to be an efficient catalyst in the presence of NaOH affording formate with a TON of 975 at 130 °C in THF/H2O after 24 h utilizing 40 bar (CO2 : H2 = 10 : 30) pressure. The complex was also active in the hydrogenation of sodium bicarbonate and inorganic carbonates to the corresponding formates. Mechanistic investigation revealed that the reaction proceeded via an intermediate formato complex.

Redox regulation of Ni hydroxides with controllable phase composition towards biomass-derived polyol electro-refinery

Electrocatalytic refinery from biomass-derived glycerol (GLY) to formic acid (FA), one of the most promising candidates for green H2 carriers, has driven widespread attention for its sustainability. Herein, we fabricated a series of monolithic Ni hydroxide-based electrocatalysts by a facile and in situ electrochemical method through the manipulation of local pH near the electrode. The as-synthesized Ni(OH)2@NF-1.0 affords a low working potential of 1.36 VRHE to achieve 100% GLY conversion, 98.5% FA yield, 96.1% faradaic efficiency and ∼0.13 A cm-2 of current density. Its high efficiency on a wide range of polyol substrates further underscores the promise of sustainable electro-refinery. Through a combinatory analysis via H2 temperature-programmed reduction, cyclic voltammetry and in situ Raman spectroscopy, the precise regulation of synthetic potential was discovered to be highly essential to controlling the content, phase composition and redox properties of Ni hydroxides, which significantly determine the catalytic performance. Additionally, the 'adsorption-activation' mode of ortho-di-hydroxyl groups during the C-C bond cleavage of polyols was proposed based on a series of probe reactions. This work illuminates an advanced path for designing non-noble-metal-based catalysts to facilitate electrochemical biomass valorization.

Heterogeneous Catalysis in Production and Utilization of Formic Acid for Renewable Energy

As the cleanest energy source, hydrogen has been followed with interest by researchers around the world. However, due to the internal low density of hydrogen, it cannot be stored and used efficiently which limits the hydrogen application on a huge scale. Chemical hydrogen storage is considered as a useful method for efficient handling and storage. Due to its excellent safety, formic acid stands out. It is worth noting that the matter and energy conversion is established based on formic acid, which is not referred to in the previous documentation. In this review, the latest development of research on heterogeneous catalysis via production and application of formic acid for energy application is reported. The matter and energy conversion based on formic acid are both discussed systematically. More importantly, with formic acid as the node, biomass energy shows potential to be in a dominant position in the energy conversion process. In addition, the catalytic mechanism is also mentioned. This review can provide the current state in this field and the new inspirations for developing superior catalytic systems.

The superiority of Pd2+ in CO2 hydrogenation to formic acid

The hydrogenation of CO2 to formic acid is an essential subject since formic acid is a promising hydrogen storage material and a valuable commodity chemical. In this study, we report for the first time the hydrogenation of CO2 to formic acid catalyzed by a Pd2+ catalyst, Pd-V/AC-air. The catalyst exhibited extraordinary catalytic activity toward the hydrogenation of CO2 to formic acid. The TON and TOF are up to 4790 and 2825 h-1, respectively, representing the top level among reported heterogeneous Pd catalysts. By combining a study of first-principles density functional theory with experimental results, the superiority of Pd2+ over Pd0 was confirmed. Furthermore, the presence of V modified the electronic state of Pd2+, thus promoting the reaction. This study reports the effect of metal valence and electronic state on the catalytic performance for the first time and provides a new prospect for the design of an efficient heterogeneous catalyst for the hydrogenation of CO2 to formic acid.

Spatial Confinement of Pt Nanoparticles in Carbon Nanotubes for Efficient and Selective H2 Evolution from Methanol

H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of O─H bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.

Catalytic Dehydrogenation of Formic Acid Promoted by Triphos-Co Complexes: Two Competing Pathways for H2 Production

In this study, we reported the synthesis and structural characterization of a triphos-CoII complex [(κ3-triphos)CoII(CH3CN)2]2+ (1) and a triphos-CoI-H complex [(κ2-triphos)HCoI(CO)2] (4). The facile synthetic pathways from 1 to [(κ3-triphos)CoII(κ2-O2CH)]+ (1') and [(κ3-triphos)CoI(CH3CN)]+ (2), respectively, as well as the interconversion between [(κ3-triphos)CoI(CO)2]+ (3) and 4 have been established. The activation energy barrier, associated with the dehydrogenation of a coordinated formate fragment in 1' yielding the corresponding 2 accompanied by the formation of H2 and CO2, was experimentally determined as 23.9 kcal/mol. With 0.01 mol % loading of 1, a maximum TON ∼ 1735 within 18 h and TOF ∼ 483 h-1 for the first 3 h could be achieved. Kinetic isotope effect (KIE) values of 2.25 (kHCOOH/kDCOOH) and 1.36 (kHCOOH/kHCOOD) for the dehydrogenation of formic acid and its deuterated derivatives, respectively, implicate that the H-COOH bond cleavage is likely the rate-determining step. The catalytic mechanism proposed by density functional theory (DFT) calculations coupled with experimental 1H NMR and gas chromatography-mass spectrometry (GC-MS) analysis unveils two competing pathways for H2 production; specifically, deprotonating a HCOO-H bond by a proposed Co-H intermediate C and homolytic cleavage of the CoII-H moiety of C, presumably via a dimeric Co intermediate D containing a [Co2(μ-H)2]2+ core, to yield the corresponding 2 and H2.

Formate dehydrogenase activity by a Cu(II)-based molecular catalyst and deciphering the mechanism using DFT studies

Due to the requirement to establish renewable energy sources, formic acid (FA), one of the most probable liquid organic hydrogen carriers (LOHCs), has received great attention. Catalytic formic acid dehydrogenation in an effective and environmentally friendly manner is still a challenge. The N3Q3 ligand (N3Q3 = N,N-bis(quinolin-8-ylmethyl)quinolin-8-amine) and the square pyramidal [Cu(N3Q3)Cl]Cl complex have been synthesised in this work and characterised using several techniques, such as NMR spectroscopy, mass spectrometry, EPR spectroscopy, cyclic voltammetry, X-ray diffraction and DFT calculations. This work investigates the dehydrogenation of formic acid using a molecular and homogeneous catalyst [Cu(N3Q3)Cl]Cl in the presence of HCOONa. The mononuclear copper complex exhibits catalytic activity towards the dehydrogenation of formic acid in H2O with the evolution of a 1 : 1 CO2 and H2 mixture. The activation energy of formic acid dehydrogenation was calculated to be Ea = 86 kJ mol-1, based on experiments carried out at various temperatures. The Gibbs free energy was found to be 82 kJ at 298 K for the decomposition of HCOOH. The DFT studies reveal that [Cu(N3Q3)(HCOO-)]+ undergoes an uphill process of rearrangement followed by decarboxylation to generate [Cu(N3Q3)(H-)]+. The initial uphill step for forming a transition state is the rate-determining step. The [Cu(N3Q3)(H-)]+ follows an activated state in the presence of HCOOH to liberate H2 and generate the [Cu(N3Q3)(OH2)]2+.

An allosteric redox switch involved in oxygen protection in a CO2 reductase

Metal-dependent formate dehydrogenases reduce CO2 with high efficiency and selectivity, but are usually very oxygen sensitive. An exception is Desulfovibrio vulgaris W/Sec-FdhAB, which can be handled aerobically, but the basis for this oxygen tolerance was unknown. Here we show that FdhAB activity is controlled by a redox switch based on an allosteric disulfide bond. When this bond is closed, the enzyme is in an oxygen-tolerant resting state presenting almost no catalytic activity and very low formate affinity. Opening this bond triggers large conformational changes that propagate to the active site, resulting in high activity and high formate affinity, but also higher oxygen sensitivity. We present the structure of activated FdhAB and show that activity loss is associated with partial loss of the metal sulfido ligand. The redox switch mechanism is reversible in vivo and prevents enzyme reduction by physiological formate levels, conferring a fitness advantage during O2 exposure.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Visible-Light-Driven CO2 Reduction with Homobimetallic Complexes. Cooperativity between Metals and Activation of Different Pathways

Visible-light-driven reduction of CO2 to both CO and formate (HCOO-) was achieved in acetonitrile solutions using a homobimetallic Cu bisquaterpyridine complex. In the presence of a weak acid (water) as coreactant, the reaction rate was enhanced, and a total of ca. 766 TON (turnover number) was reached for the CO2 reduction, with 60% selectivity for formate and 28% selectivity for CO, using Ru(phen)32+ as a sensitizer and amines as sacrificial electron donors. Mechanistic studies revealed that with the help of cooperativity between two Cu centers, a bridging hydride is generated in the presence of a proton source (water) and further reacts with CO2 to give HCOO-. A second product, CO, was also produced in a parallel competitive pathway upon direct coordination of CO2 to the reduced complex. Mechanistic studies further allowed comparison of the observed reactivity to the monometallic Cu quaterpyridine complex, which only produced CO, and to the related homobimetallic Co bisquaterpyridine complex, that has been previously shown to generate formate following a mechanism not involving the formation of an intermediate hydride species.

Formic Acid Dehydrogenation through Ligand Design Strategy of Amidation in Half-Sandwich Ir Complexes

A series of Cp*Ir (Cp* = pentamethylcyclopentadienyl) complexes with amidated 8-aminoquinoline ligands were synthesized and tested for formic acid (FA) dehydrogenation. These complexes showed improved activities compared to pristine 8-anminquinoline (L1). Specially, amidation changed the outer coordination sphere of the complex (3) bearing N-8-quinolinylformamide (L3), and 3 was proved to be a proton-responsive catalyst. Our experimental results and DFT calculations demonstrated that the deprotonated carbanion in L3 could interact with a water molecule to stabilize the transition states and lower the reaction energy barrier, which improved the reaction activity. A turnover frequency of 206250 h-1 was achieved by 3 under optimized conditions. This study presents a method to develop new ligands and modify the existing ligands for efficient FA dehydrogenation.

N-Site Regulation of Pyridyltriazole in Cp*Ir(N̂N)(H2O) Complexes Achieving Catalytic FA Dehydrogenation

A series of novel Cp*Ir complexes with nitrogen-rich N̂N bidentate ligands were developed for the catalytic dehydrogenation of formic acid in water under base-free conditions. These complexes were synthesized by using pyridyl 1,2,4-triazole, methylated species, or pyridyl 1,2,3-triazole as a N-site regulation ligand and were fully characterized. Complex 1-H2O bearing 1,2,4-triazole achieved a high turnover frequency of 14192 h-1 at 90 °C in 4 M FA aqueous solution. The terminal and bridged Ir-H intermediates of 1-H2O were successfully detected by 1H NMR and mass spectrometry measurements. Kinetic isotope effect experiments and density functional theory (DFT) calculations were performed; then a plausible mechanism was proposed involving the β-hydride elimination and formation of H2. Water-assisted H2 release was proven to be the rate-determining step of the reaction. The distribution of Mulliken charges on N atoms of triazole ligand internally revealed that the ortho site N2 of 1-H2O with a higher electron density was conducive to efficient proton transfer. Additionally, the advantage of water-assisted short-range bridge of 1,2,4-triazole moieties led to a higher catalytic activity of 1-H2O. This study demonstrated the effectiveness of nitrogen-rich ligands on FA dehydrogenation and revealed a good strategy for N site regulation in the development of new homogeneous catalysts.

On the Demise of PPP-Ligated Iron Catalysts in the Formic Acid Dehydrogenation Reaction

The PPP-ligated iron complexes, cis-(iPrPPRP)FeH2(CO) [iPrPPRP = (o-iPr2PC6H4)2PR (R = H or Me)], catalyze the dehydrogenation of formic acid to carbon dioxide but lose their catalytic activity over time. This study focuses on the analysis of the species formed from the degradation of cis-(iPrPPMeP)FeH2(CO) over its course of catalyzing the dehydrogenation reaction. These degradation products include species both soluble and insoluble in the reaction medium. The soluble component of the decomposed catalyst is a mixture of cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x], protonated iPrPPMeP, and oxidation products resulting from adventitious O2. The precipitate is solvated Fe(OCHO)2. Further mechanistic investigation suggests that cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x] displays diminished but measurable catalytic activity, likely through the displacement of a CO ligand by the formate ion. The formation of Fe(OCHO)2 along with the dissociation of iPrPPMeP is responsible for the eventual loss of catalytic activity.

Recent Developments in Reversible CO2 Hydrogenation and Formic Acid Dehydrogenation over Molecular Catalysts

Carbon dioxide (CO2), a valuable feedstock, can be reutilized as a hydrogen carrier by hydrogenating CO2 to formic acid (FA) and releasing hydrogen by FA dehydrogenation in a reversible manner. Notably, FA is liquid at room temperature and can be stored and transported considerably more safely than hydrogen gas. Herein, we extensively reviewed transition-metal-based molecular catalysts explored for reversible CO2 hydrogenation and FA dehydrogenation. This Review describes different approaches explored for carbon-neutral hydrogen storage and release by applying CO2 hydrogenation to FA/formate and the subsequent release of H2 by the dehydrogenation of FA over a wide range of molecular catalysts based on noble and non-noble metals. Emphasis is also placed on the specific catalyst-to-substrate interaction by highlighting the specific role of the catalyst in the CO2 hydrogenation-FA dehydrogenation pathway.

Atomically Dispersed Cobalt/Copper Dual-Metal Catalysts for Synergistically Boosting Hydrogen Generation from Formic Acid

The development of practical materials for (de)hydrogenation reactions is a prerequisite for the launch of a sustainable hydrogen economy. Herein, we present the design and construction of an atomically dispersed dual-metal site Co/Cu-N-C catalyst allowing significantly improved dehydrogenation of formic acid, which is available from carbon dioxide and green hydrogen. The active catalyst centers consist of specific CoCuN6 moieties with double-N-bridged adjacent metal-N4 clusters decorated on a nitrogen-doped carbon support. At optimal conditions the dehydrogenation performance of the nanostructured material (mass activity 77.7 L ⋅ gmetal -1  ⋅ h-1 ) is up to 40 times higher compared to commercial 5 % Pd/C. In situ spectroscopic and kinetic isotope effect experiments indicate that Co/Cu-N-C promoted formic acid dehydrogenation follows the so-called formate pathway with the C-H dissociation of HCOO* as the rate-determining step. Theoretical calculations reveal that Cu in the CoCuN6 moiety synergistically contributes to the adsorption of intermediate HCOO* and raises the d-band center of Co to favor HCOO* activation and thereby lower the reaction energy barrier.

Efficient additive-free formic acid dehydrogenation with a NNN-ruthenium complex

A new ruthenium complex containing a pyridylidene amine-based NNN ligand was developed as a catalyst precursor for formic acid dehydrogenation, which, as a rare example, does not require basic additives to display high activity (TOF ∼10 000 h-1). Conveniently, the complex is air-stable, but sensitive to light. Mechanistic investigations using UV-vis and NMR spectroscopic monitoring correlated with gas evolution profiles indicate rapid and reversible protonation of the central nitrogen of the NNN ligand as key step of catalyst activation, followed by an associative step for formic acid dehydrogenation.

Carbon neutral hydrogen storage and release cycles based on dual-functional roles of formamides

The development of alternative clean energy carriers is a key challenge for our society. Carbon-based hydrogen storage materials are well-suited to undergo reversible (de)hydrogenation reactions and the development of catalysts for the individual process steps is crucial. In the current state, noble metal-based catalysts still dominate this field. Here, a system for partially reversible and carbon-neutral hydrogen storage and release is reported. It is based on the dual-functional roles of formamides and uses a small molecule Fe-pincer complex as the catalyst, showing good stability and reusability with high productivity. Starting from formamides, quantitative production of CO-free hydrogen is achieved at high selectivity ( > 99.9%). This system works at modest temperatures of 90 °C, which can be easily supplied by the waste heat from e.g., proton-exchange membrane fuel cells. Employing such system, we achieve >70% H₂ evolution efficiency and >99% H₂ selectivity in 10 charge-discharge cycles, avoiding undesired carbon emission between cycles.

Size Effects of Highly Dispersed Bismuth Nanoparticles on Electrocatalytic Reduction of Carbon Dioxide to Formic Acid

Electrocatalytic reduction of carbon dioxide into value-added chemical fuels is a promising way to achieve carbon neutrality. Bismuth-based materials have been considered as favorable electrocatalysts for converting carbon dioxide to formic acid. Moreover, size-dependent catalysis offers significant advantages in catalyzed heterogeneous chemical processes. However, the size effects of bismuth nanoparticles on formic acid production have not been fully explored. Here, we prepared Bi nanoparticles uniformly supported on porous TiO₂ substrate electrocatalytic materials by in situ segregation of the Bi element from Bi₄Ti₃O₁₂. The Bi-TiO₂ electrocatalyst with Bi nanoparticles of 2.83 nm displays a Faradaic efficiency of greater than 90% over a wide potential range of 400 mV. Theoretical calculations have also demonstrated subtle electronic structural evolutions induced by the size variations of Bi nanoparticles, where the 2.83 nm Bi nanoparticles display the most active p-band and d-band centers to guarantee high electroactivity toward CO₂RR.

Efficient [Fe-Imidazole@SiO2] Nanohybrids for Catalytic H2 Production from Formic Acid

Three imidazole-based hybrid materials, coded as IGOPS, IPS and impyridine@SiO₂ nanohybrids, were prepared via the covalent immobilization of N-ligands onto a mesoporous nano-SiO₂ matrix for H₂ generation from formic acid (FA). BET and HRTEM demonstrated that the immobilization of the imidazole derivative onto SiO₂ has a significant effect on the SSA, average pore volume, and particle size distribution. In the context of FA dehydrogenation, their catalytic activity (TONs, TOFs), stability, and reusability were assessed. Additionally, the homologous homogeneous counterparts were evaluated for comparison purposes. Mapping the redox potential of solution E_h vs. SHE revealed that poly-phosphine PP₃ plays an essential role in FA dehydrogenation. On the basis of performance and stability, [Fe²⁺/IGOPS/PP₃] demonstrated superior activity compared to other heterogeneous catalysts, producing 9.82 L of gases (VH₂ + CO₂) with TONs = 31,778, albeit with low recyclability. In contrast, [Fe²⁺/IPS/PP₃] showed the highest stability, retaining considerable performance after three consecutive uses. With VH₂ + CO₂ = 7.8 L, [Fe²⁺/impyridine@SiO₂/PP₃] activity decreased, and it was no longer recyclable. However, the homogeneous equivalent of [Fe²⁺/impyridine/PP₃] was completely inactive. Raman, FT/IR, and UV/Vis spectroscopy demonstrated that the reduced recyclability of [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/impyridine@SiO₂/PP₃] nanohybrids is due to the reductive cleavage of their C-O-C bonds during catalysis. An alternative grafting procedure is proposed, applying here to the grafting of IPS, resulting in its higher stability. The accumulation of water derived from substrate's feeding causes the inhibition of catalysis. In the case of [Fe²⁺-imidazole@SiO₂] nanohybrids, simple washing and drying result in their re-activation, overcoming the water inhibition. Thus, the low-cost imidazole-based nanohybrids IGOPS and IPS are capable of forming [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/IPS/PP₃] heterogeneous catalytic systems with high stability and performance for FA dehydrogenation.

Diruthenium Catalyst for Hydrogen Production from Aqueous Formic Acid

Diruthenium complexes [{(η⁶-arene)RuCl}₂(μ-κ²:κ²-benztetraimd)]²⁺ containing the bridging bis-imidazole methane-based ligand {1,4-bis(bis(2-ethyl-5-methyl-1H-imidazol-4-yl)methyl)benzene} (benztetraimd) are synthesized for catalytic formic acid dehydrogenation in water at 90 °C. Catalyst [{(η⁶-p-cymene)RuCl}₂(μ-κ²:κ²-benztetraimd)]²⁺ [1-Cl₂] exhibited a remarkably high turnover frequency (1993 h^-1 per Ru atom) and long-term stability over 60 days for formic acid dehydrogenation, while the analogous (η⁶-benzene)diruthenium and mononuclear catalysts displayed low activity with poor long-term stability. Notably, catalyst [1-Cl₂] also displayed an appreciably high turnover number of 93 200 for the bulk-scale reaction. In addition, the in-depth mass and nuclear magnetic resonance investigations under the catalytic and control experimental conditions revealed the active involvement of several crucial catalytic intermediate species, such as Ru-aqua species [{(η⁶-p-cymene)Ru(H₂O)}₂(μ-L)]²⁺ [1-(OH₂)₂], Ru-formato species [{(η⁶-p-cymene)Ru(HCOO)}₂(μ-L)] [1-(HCOO)₂], and Ru-hydrido species [{(η⁶-p-cymene)Ru(H)}₂(μ-L)] [1-(H)₂], in the catalytic formic acid dehydrogenation reaction.

Iridium-(κ2-NSi) catalyzed dehydrogenation of formic acid: effect of auxiliary ligands on the catalytic performance

The iridium(III) complexes [Ir(H)(Cl)(κ²-NSi^tBu₂)(κ²-bipy^Me₂)] (2) and [Ir(H)(OTf)(κ²-NSi^tBu₂)(κ²-bipy^Me₂)] (3) (NSi^tBu₂ = {4-methylpyridine-2-yloxy}ditertbutylsilyl) have been synthesized and characterized including X-ray studies of 3. A comparative study of the catalytic activity of complexes 2, 3, [Ir(H)(OTf)(κ²-NSi^tBu₂)(coe)] (4), and [Ir(H)(OTf)(κ²-NSi^tBu₂)(PCy₃)] (5) (0.1 mol%) as catalysts precursors for the solventless formic acid dehydrogenation (FADH) in the presence of Et₃N (40 mol%) at 353 K has been performed. The highest activity (TOF_{5 min} ≈ 3260 h^-1) has been obtained with 3 at 373 K. However, at that temperature the FTIR spectra show traces of CO together with the desired products (H₂ and CO₂). Thus, the best performance was achieved at 353 K (TOF_{5 min} ≈ 1210 h^-1 and no observable CO). Kinetic studies at variable temperature show that the activation energy of the 3-catalyzed FADH process is 16.76 kcal mol^-1. Kinetic isotopic effect (5 min) values of 1.6, 4.5, and 4.2 were obtained for the 3-catalyzed dehydrogenation of HCOOD, DCOOH, and DCOOD, respectively, at 353 K. The strong KIE found for DCOOH and DCOOD evidenced that the hydride transfer from the C-H bond of formic acid to the metal is the rate-determining step of the process.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Photocatalytic Production of Syngas from Biomass

ConspectusAs a renewable solar energy and carbon carrier, biomass exploration has received global attention. Photocatalytic valorization of biomass into fuels and chemicals is a promising and sustainable method for future chemical production. Photocatalysis has the potential to accomplish reactions under ambient conditions due to the unique reaction mechanisms involving photoinduced charge carriers and has recently been recognized as an efficient and feasible technology for biomass conversion. Biomass is widely used as sacrificial agent to scavenge holes in photocatalytic hydrogen evolution, and the carbon is eventually degraded to CO₂ with a minor amount of CO. The generation of CO instead of CO₂ is more economical and promising but also a challenge under photoreforming conditions.This is a new research direction, while until now there has still been the lack of a comprehensive review article to summarize and provide prospects for this topic. This Account will highlight our contributions in the research direction of the photocatalytic reforming of biomass into syngas (CO + H₂). In 2020, we first reported the photocatalytic conversion of biopolyols and sugars into syngas by employing a defect-rich Cu-TiO₂ nanorod photocatalyst and found that formic acid is a key intermediate to CO. Further study revealed that a facet-dependent electron-trapping state on anatase TiO₂ will affect the photocatalytic dehydration activity for formic acid intermediates by regulating the electron transfer process during the reaction, and the selective generation of FA or CO from photocatalytic biomass reforming was achieved via exposing the (100) or (101) facets, respectively. Visible light-driven syngas generation was further achieved over a CdS-based photocatalyst. Sulfate modification of CdS ([SO₄]/CdS) was constructed as the proton acceptor, thus efficiently facilitating the proton-coupled electron transfer process. Besides, we put forward an oxygen-controlled strategy to increase the CO generation rate without a significant decrease in CO selectivity via controlling the O₂/substrate ratio. Based on this system, a Z-scheme CdS@g-C₃N₄ core-shell structure and CdO-CdS semicoherent interface were created to facilitate charge transfer and enhance the O₂ activation, thus increasing the CO generation rate. Moreover, we also developed a photoelectrochemical approach to separately produce CO and H₂ from biomass. Nitrogen doping of a hexagonal WO₃ nanowire array was used to produce the photoanode. The built-in electric field generated via nitrogen doping promoted charge transfer, hence improving the efficiency of PEC reforming of biopolyols and sugars. This Account will systematically analyze the challenges in this research direction, the reaction route in the photocatalytic biomass reforming, and the factors affecting CO selectivity and give insight into the design of efficient photocatalytic systems.

Electrocatalyst Microenvironment Engineering for Enhanced Product Selectivity in Carbon Dioxide and Nitrogen Reduction Reactions

Carbon and nitrogen fixation strategies are regarded as alternative routes to produce valuable chemicals used as energy carriers and fertilizers that are traditionally obtained from unsustainable and energy-intensive coal gasification (CO and CH₄), Fischer-Tropsch (C₂H₄), and Haber-Bosch (NH₃) processes. Recently, the electrocatalytic CO₂ reduction reaction (CO₂RR) and N₂ reduction reaction (NRR) have received tremendous attention, with the merits of being both efficient strategies to store renewable electricity while providing alternative preparation routes to fossil-fuel-driven reactions. To date, the development of the CO₂RR and NRR processes is primarily hindered by the competitive hydrogen evolution reaction (HER); however, the corresponding strategies for inhibiting this undesired side reaction are still quite limited. Considering such complex reactions involve three gas-liquid-solid phases and successive proton-coupled electron transfers, it appears meaningful to review the current strategies for improving product selectivity in light of their respective reaction mechanisms, kinetics, and thermodynamics. By examining the developments and understanding in catalyst design, electrolyte engineering, and three-phase interface modulation, we discuss three key strategies for improving product selectivity for the CO₂RR and NRR: (i) targeting molecularly defined active sites, (ii) increasing the local reactant concentration at the active sites, and (iii) stabilizing and confining product intermediates.

A ligand design strategy to enhance catalyst stability for efficient formic acid dehydrogenation

New Ir complexes bearing N-(methylsulfonyl)-2-pyridinecarboxamide (C1) and N-(phenylsulfonyl)-2-pyridinecarboxamide (C2) were employed as catalysts for aqueous formic acid dehydrogenation (FADH). The ligands were designed to maintain the picolinamide skeleton and introduce strong sigma sulfonamide moieties. C1 and C2 exhibited good stability towards air and concentrated formic acid (FA). During 20 continuous cycles, C1 and C2 could achieve the complete conversion of FA with TONs of 172 916 and 172 187, respectively. C1 achieved a high TOF of 19 500 h^-1 at 90 °C and an air-stable Ir-H species was observed by ¹H NMR spectroscopy.

Structural snapshots of an Al-Cu bond-mediated transformation of terminal acetylenes

The copper(i) alumanyl derivative, [{SiN^Dipp}Al-Cu(NHC^iPr)] (SiN^Dipp = {CH₂SiMe₂NDipp}₂; Dipp = 2,6-di-isopropylphenyl; NHC^iPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), reacts in a stepwise fashion with up to three equivalents of various terminal alkynes. This reactivity results in the sequential formation of cuprous (hydrido)(alkynyl)aluminate, (alkenyl)(alkynyl)aluminate and bis(alkynyl)aluminate derivatives, examples of which have been fully characterised. The process of alkene liberation resulting from the latter reaction step constitutes a unique case of alkyne transfer semi-hydrogenation in which the C-H acidic alkyne itself acts as a source of proton, with the Cu-Al bond providing the requisite electrons to effect reduction. This reaction sequence is validated by DFT calculations, which rationalise the variable stability of the initially formed heterobimetallic hydrides.

Evaluating the Catalytic Activities of PNCNP Pincer Group 10 Metal Hydride Complexes: Pd-Catalyzed Reduction of CO2 to the Formic Acid Level with NH3·BH3 and NaBH4 under Ambient Conditions

In order to develop efficient protocols for CO₂ reduction with less expensive and more convenient hydrogen sources, the catalytic reactivities of group 10 metal hydride complexes supported by a PNCNP pincer ligand, [2,6-(^tBu₂PNH)₂C₆H₃]MH (M = Ni, 1a; Pd, 1b; Pt, 1c), against the hydroboration of CO₂ with NH₃·BH₃ and NaBH₄ have been explored. Both 1a and 1b readily react with CO₂ at room temperature to form the corresponding formato complexes, [2,6-(^tBu₂PNH)₂C₆H₃]MOC(O)H (M = Ni, 2a; Pd, 2b), in nearly quantitative yields. Treatment of NH₃·BH₃ with CO₂ (1 atm) in 1,4-dioxane or THF at room temperature in the presence of 0.05-1.0 mol % of 1b followed by hydrolysis of the resulting mixtures produces formic acid in 105-186% yields, and initial turnover frequencies of up to 2000 h^-1 are observed. In the presence of 1.0 mol % of 1b, NaBH₄ reacts with CO₂ (1 atm) in THF at room temperature to form NaB[OC(O)H]₄ (3) in 87% isolated yield. In situ NMR spectroscopy indicates that the reactions proceed through the insertion of the C═O bond in CO₂ into the Pd-H bond in 1b to form 2b, which sequentially reacts with the hydrides in NH₃·BH₃ or NaBH₄ to produce boron formato species and regenerate 1b. This work represents one of the rare examples of catalytic transfer hydrogenation of CO₂ with NH₃·BH₃ to the formic acid level under very mild conditions without any additives and also the first example of 4 equiv of CO₂ uptake by NaBH₄ in a reaction.

Versatile CO2 Hydrogenation-Dehydrogenation Catalysis with a Ru-PNP/Ionic Liquid System

High catalytic activities of Ru-PNP [Ru = ruthenium; PNP = bis alkyl- or aryl ethylphosphinoamine complexes in ionic liquids (ILs) were obtained for the reversible hydrogenation of CO₂ and dehydrogenation of formic acid (FA) under exceedingly mild conditions and without sacrificial additives. The novel catalytic system relies on the synergic combination of Ru-PNP and IL and proceeds with CO₂ hydrogenation already at 25 °C under a continuous flow of 1 bar of CO₂/H₂ (1:5), leading to 14 mol % FA with respect to the IL. A pressure of 40 bar of CO₂/H₂ (1:1) provides 126 mol % of FA/IL corresponding to a space-time yield (STY) of FA of 0.15 mol L^-1 h^-1. The conversion of CO₂ contained in imitated biogas was also achieved at 25 °C. Furthermore, the Ru-PNP/IL system catalyzes FA dehydrogenation with average turnover frequencies up to 11,000 h^-1 under heat-integrated conditions for proton-exchange membrane fuel cell applications (<100 °C). Thus, 4 mL of a 0.005 M Ru-PNP/IL system converted 14.5 L FA over 4 months with a turnover number exceeding 18,000,000 and a STY of CO₂ and H₂ of 35.7 mol L^-1 h^-1. Finally, 13 hydrogenation/dehydrogenation cycles were achieved with no sign of deactivation. These results demonstrate the potential of the Ru-PNP/IL system to serve as a FA/CO₂ battery, a H₂ releaser, and a hydrogenative CO₂ converter.

A Recent Review of Primary Hydrogen Carriers, Hydrogen Production Methods, and Applications

Hydrogen is a promising energy carrier, especially for transportation, owing to its unique physical and chemical properties. Moreover, the combustion of hydrogen gas generates only pure water; thus, its wide utilization can positively affect human society to achieve global net zero CO2 emissions by 2050. This review summarizes the characteristics of the primary hydrogen carriers, such as water, methane, methanol, ammonia, and formic acid, and their corresponding hydrogen production methods. Additionally, state-of-the-art studies and hydrogen energy applications in recent years are also included in this review. In addition, in the conclusion section, we summarize the advantages and disadvantages of hydrogen carriers and hydrogen production techniques and suggest the challenging tasks for future research.

ROS-responsive magnesium-containing microspheres for antioxidative treatment of intervertebral disc degeneration

Intervertebral disc degeneration (IVDD) is a degenerative disease characterized by lower-back pain, causing disability globally. Antioxidant therapy is currently considered one of the most promising strategies for IVDD treatment, given the crucial role of reactive oxygen species (ROS) in IVDD pathogenesis. Herein, a ROS-responsive magnesium-containing microsphere (Mg@PLPE MS) was constructed for the antioxidative treatment of IVDD. The Mg@PLPE MS has a core-shell structure comprising poly(lactic-co-glycolic acid) (PLGA) and ROS-responsive polymer poly(PBT-co-EGDM) as the shell and a magnesium microparticle as the core. The poly(PBT-co-EGDM) can be destroyed by H₂O₂ through the H₂O₂-triggered hydrophobic-to-hydrophilic transition, subsequently promoting an Mg-water reaction to produce H₂. Thus, Mg@PLPE MS provides a valuable platform for H₂O₂ elimination and controlled H₂ release. The generated H₂ scavenge for ROS by reacting with noxious •OH. Notably, the Mg@PLPE MS exerted significant antioxidative and anti-inflammatory effects in a disc degeneration rat model and alleviated extracellular matrix degradation and disc cells apoptosis, thereby underlining its efficacy in IVDD treatment. The Mg@PLPE MS also exhibited robust biocompatibility and negligible toxicity, presenting the promise for the antioxidative treatment of IVDD in vivo. STATEMENT OF SIGNIFICANCE: Antioxidant therapy is currently considered one of the most promising strategies for intervertebral disc degeneration (IVDD) treatment, given the crucial role of reactive oxygen species (ROS) in IVDD pathogenesis. Here, ROS-responsive magnesium-containing microspheres (Mg@PLPE MSs) were constructed to alleviate IVDD through controlled release of hydrogen gas. The Mg@PLPE MSs can effectively scavenge overproduced ROS by simultaneously reacting with H₂O₂ and •OH, thus creating a suitable microenvironment for inhibition of ECM degradation. As a result, Mg@PLPE MSs treated IVDD rats exhibit minimal nucleus pulposus decrease, less extracellular matrix degradation, minimal radial fissure of fibrous rings, and higher disc height index. Therefore, the as-prepared Mg@PLPE MSs may shed a new light on clinical treatment of IVDD.

Interheteromolecular Hyperconjugation Boosts (De)hydrogenation for Reversible H2 Storage

Interheteromolecular hyperconjugation is ubiquitous in organic systems, affecting bond length, dipole moments, conformations and so on, while its effect on (de)hydrogenation reactivity in a heterogeneous thermo-catalytic system has rarely been explored. Herein, the N-heterocycles containing a benzene ring and aliphatic chain [N-ethylcarbazole (NEC) and N-propylcarbazole (NPC)] were utilized to study the correlation between interheteromolecular hyperconjugation and catalytic (de)hydrogenation. Density functional theory calculations, variable-temperature ¹ H nuclear magnetic resonance spectroscopy, and catalytic experiments showed that the presented hyperconjugation between NEC and NPC weakened the electron cloud density of aromatic rings and thus facilitated the reactivity with hydrogen featuring unpaired electrons. Therefore, an extremely low temperature of 80 °C was enough for the hydrogenation. Moreover, this interheteromolecular hyperconjugation was general in other N-heterocycles (e. g., N-methyindole and NPC) and was also effective to (de)deuterate as revealed by isotope experiments. This work expands the application of interheteromolecular hyperconjugation to heterogeneous thermocatalysis for reversible H₂ storage.

Sustainable Synthesis of Silicon Precursors Coupled with Hydrogen Delivery Based on Circular Economy via Molecular Cobalt-Based Catalysts

The development of a circular economy is a key target to reduce our dependence on fossil fuels and create more sustainable processes. Concerning hydrogen as an energy vector, the use of liquid organic hydrogen carriers is a promising strategy, but most of them present limitations for hydrogen release, such as harsh reaction conditions, poor recyclability, and low-value byproducts. Herein, we present a novel sustainable methodology to produce value-added silicon precursors and concomitant hydrogen via dehydrogenative coupling by using an air- and water-stable cobalt-based catalyst synthesized from cheap and commercially available starting materials. This methodology is applied to the one-pot synthesis of a wide range of alkoxy-substituted silanes using different hydrosilanes and terminal alkenes as reactants in alcohols as green solvents under mild reaction conditions (room temperature and 0.1 mol % cobalt loading). We also demonstrate that the selectivity toward hydrosilylation/hydroalkoxysilylation can be fully controlled by varying the alcohol/water ratio. This implies the development of a circular approach for hydrosilylation/hydroalkoxysilylation reactions, which is unprecedented in this research field up to date. Kinetic and in situ spectroscopic studies (electron paramagnetic resonance, nuclear magnetic resonance, and electrospray ionization mass spectrometry), together with density functional theory simulations, further provide a detailed mechanistic picture of the dehydrogenative coupling and subsequent hydrosilylation. Finally, we illustrate the application of our catalytic system in the synthesis of an industrially relevant polymer precursor coupled with the production of green hydrogen on demand.

Sterically and Electronically Flexible Pyridylidene Amine Dinitrogen Ligands at Palladium: Hemilabile cis/trans Coordination and Application in Dehydrogenation Catalysis

Ligand design is crucial for the development of new catalysts and materials with new properties. Herein, the synthesis and unique hemilabile coordination properties of new bis-pyridylidene amine (bis-PYE) ligands to palladium, and preliminary catalytic activity of these complexes in formic acid dehydrogenation are described. The synthetic pathway to form cationic complexes [Pd(bis-PYE)Cl(L)]X with a cis-coordinated N,N-bidentate bis-PYE ligand is flexible and provides access to a diversity of PdII complexes with different ancillary ligands (L=pyridine, DMAP, PPh3 , Cl, P(OMe)3 ). The 1 H NMR chemical shift of the trans-positioned PYE N-CH3 unit is identified as a convenient and diagnostic handle to probe the donor properties of these ancillary ligands and demonstrates the electronic flexibility of the PYE ligand sites. In the presence of a base, the originally cis-coordinated bis-PYE ligand adopts a N,N,N-tridentate coordination mode with the two PYE units in mutual trans position. This cis-trans isomerization is reverted in presence of an acid, demonstrating a unique structural and steric flexibility of the bis-PYE ligand at palladium in addition to its electronic adaptability. The palladium complexes are active in formic acid dehydrogenation to H2 and CO2 . The catalytic performance is directly dependent on the ligand bonding mode, the nature of the ancillary ligand, the counteranion, and additives. The most active system features a bidentate bis-PYE ligand, PPh3 as ancillary ligand and accomplishes turnover frequencies up to 525 h-1 in the first hour and turnover numbers of nearly 1000, which is the highest activity reported for palladium-based catalysts to date.