Selenium in soil-plant system: Transport, detoxification and bioremediation

Selenium (Se) is an essential micronutrient for humans and a beneficial element for plants. However, high Se doses always exhibit hazardous effects. Recently, Se toxicity in plant-soil system has received increasing attention. This review will summarize (1) Se concentration in soils and its sources, (2) Se bioavailability in soils and influencing factors, (3) mechanisms on Se uptake and translocation in plants, (4) toxicity and detoxification of Se in plants and (5) strategies to remediate Se pollution. High Se concentration mainly results from wastewater discharge and industrial waste dumping. Selenate (Se [VI]) and selenite (Se [IV]) are the two primary forms absorbed by plants. Soil conditions such as pH, redox potential, organic matter and microorganisms will influence Se bioavailability. In plants, excessive Se will interfere with element uptake, depress photosynthetic pigment biosynthesis, generate oxidative damages and cause genotoxicity. Plants employ a series of strategies to detoxify Se, such as activating antioxidant defense systems and sequestrating excessive Se in the vacuole. In order to alleviate Se toxicity to plants, some strategies can be applied, including phytoremediation, OM remediation, microbial remediation, adsorption technique, chemical reduction technology and exogenous substances (such as Methyl jasmonate, Nitric oxide and Melatonin). This review is expected to expand the knowledge of Se toxicity/detoxicity in soil-plant system and offer valuable insights into soils Se pollution remediation strategies.

A critical analysis of sources, pollution, and remediation of selenium, an emerging contaminant

Selenium (Se) is an essential metalloid and is categorized as emerging anthropogenic contaminant released to the environment. The rise of Se release into the environment has raised concern about its bioaccumulation, toxicity, and potential to cause serious damages to aquatic and terrestrial ecosystem. Therefore, it is extremely important to monitor Se level in environment on a regular basis. Understanding Se release, anthropogenic sources, and environmental behavior is critical for developing an effective Se containment strategy. The ongoing efforts of Se remediation have mostly emphasized monitoring and remediation as an independent topics of research. However, our paper has integrated both by explaining the attributes of monitoring on effective scale followed by a candid review of widespread technological options available with specific focus on Se removal from environmental media. Another novel approach demonstrated in the article is the presentation of an overwhelming evidence of limitations that various researchers are confronted with to overcome achieving effective remediation. Furthermore, we followed a holistic approach to discuss ways to remediate Se for cleaner environment especially related to introducing weak magnetic field for ZVI reactivity enhancement. We linked this phenomenal process to electrokinetics and presented convincing facts in support of Se remediation, which has led to emerge 'membrane technology', as another viable option for remediation. Hence, an interesting, innovative and future oriented review is presented, which will undoubtedly seek attention from global researchers.

Recent Advances on Heteroatom-Doped Porous Carbon/Metal Materials: Fascinating Heterogeneous Catalysts for Organic Transformations

Design and preparation of low-cost, effective, and novel catalysts are important topics in the field of heterogeneous catalysis from academic and industrial perspectives. Recently, heteroatom-doped porous carbon/metal materials have received significant attention as promising catalysts in divergent organic reactions. Incorporation of heteroatom into the carbon framework can tailor the properties of carbon, providing suitable interaction between support and metal, resulting in superior catalytic performance compared with those of traditional pure carbon/metal catalytic systems. In this review, we try to underscore the recent advances in the design, preparation, and application of heteroatom-doped porous carbon/metal catalysts towards various organic transformations.

Environmental Impacts of Selenium Contamination: A Review on Current-Issues and Remediation Strategies in an Aqueous System

In both aquatic and terrestrial environment, selenium contamination may exist at concentrations above the micronutrient limit. Since there is such a narrow bandwidth between which selenium concentration is acceptable, the health of the public may be at risk of selenium toxicity once the concentration increases beyond a threshold. Selenium contamination in an aqueous environment can occur due to anthropogenic activities and/or from natural sources. This study presents a review of the forms of selenium, inorganic and organic selenium contamination, mobilization, analytical methods for various forms of selenium and remediation strategies. The review also provides recent advances in removal methods for selenium from water including bioremediation, precipitation, coagulation, electrocoagulation, adsorption, nano-zerovalent iron, iron co-precipitation and other methods. A review of selenomethionine and selenocysteine removal strategy from industrial wastewaters is presented. Selenium resource recovery from copper ore processing has been discussed. Various analytical methods used for selenium and heavy metal analysis were compared. Importantly, existing knowledge gaps were identified and prospective areas for further research were recommended.

Doping strategy, properties and application of heteroatom-doped ordered mesoporous carbon

To date, tremendous achievements have been made to produce ordered mesoporous carbon (OMC) with well-designed and controllable porous structure for catalysis, energy storage and conversion. However, OMC as electrode material suffers from poor hydrophilicity and weak electrical conductivity. Numerous attempts and much research interest have been devoted to dope different heteroatoms in OMC as the structure defects to enhance its performance, such as nitrogen, phosphorus, sulphur, boron, and multi heteroatoms. Unfortunately, the "how-why-what" question for the heteroatom-doped OMC has not been summarized in any published reports. Therefore, this review focuses on the functionalization strategies of heteroatoms in OMC and the corresponding process characteristics, including in situ method, post treatment method, and chemical vapor deposition. The fundamentally influencing mechanisms of various heteroatoms in electrochemical property and porous structure are summarized in detail. Furthermore, this review provides an updated summary about the applications of different heteroatom-doped OMC in supercapacitor, electrocatalysis, and ion battery during the last decade. Finally, the future challenges and research strategies for heteroatom-doped OMC are also proposed.

Enhanced reactivity and electron selectivity of GAC-Fe-Cu ternary micro-electrolysis system toward p-chloronitrobenzene under oxic conditions

A novel GAC-Fe-Cu ternary micro-electrolysis system was synthesized for the removal of p-chloronitrobenzene (p-CNB) under oxic conditions. p-CNB could be efficiently removed by GAC-Fe-Cu at a wide initial pH range of 1.0-9.0. In particular, the p-CNB removal efficiency of 96.96 % was obtained at initial pH of 7.2, and the degradation (44.96 %) was the major removal pathway. Additionally, reduction and oxidation simultaneously contributed to the degradation of p-CNB. The results indicated that OH was the prime reactive species under acidic conditions while O₂^- dominated the degradation of p-CNB under neutral conditions. Reduction reaction was remarkably enhanced in the presence of dissolved oxygen and the iron corrosion could be accelerated by in-situ generated H₂O₂. Furthermore, XPS analysis of GAC-Fe-Cu revealed the surface-mediated electron transfer and oxidant generation process. The excellent degradation efficiency of p-CNB at initial pH of 7.2 was attributed to the enhanced electron selectivity of GAC-Fe-Cu as well as the high selectivity of near-surface generated O₂^- toward p-CNB and its intermediate products.

Facile synthesis of N/B-double-doped Mn2O3 and WO3 nanoparticles for dye degradation under visible light

In the present work, nitrogen-doped and nitrogen-boron-double-doped manganese oxide (Mn₂O₃) and tungsten oxide (WO₃) nanoparticles were synthesized using precipitation-hydrothermal method for methylene blue degradation under visible light. Materials were characterized using X-ray diffraction (XRD) analysis, Scanning electron microscopy, Energy dispersive X-ray spectroscopy and UV-vis spectroscopy. Results showed that N and B were successfully incorporated into the crystal lattices of Mn₂O₃ and WO₃. XRD showed that WO₃ was crystallized in the form of a monoclinic lattice, while cubic Mn₂O₃ was produced in the cubic form. The crystallite size was found to be decreased due to the substitution of N and B elements which reveals their roles to accelerate the crystal nucleation rate resulting in the decreased size. On the other hand, single and double doping has successfully narrowed the band gaps of the as-synthesised metal oxide photocatalysts resulting in better absorption in the visible light. Band gaps obtained were as follows: 3.02, 2.50, 1.73 and 1.77 eV for N-WO₃ N/B-WO₃, N-Mn₂O₃ and N/B-Mn₂O₃ respectively. Photocatalytic experiments showed that all as-synthesised materials exhibited a photocatalytic efficiency under visible light ≥420 nm. The degradation efficiency of methylene blue (MB) was in the following order: N-B-co-doped metal oxides > N-doped metal oxides > metal oxides. The presence of scavenger molecules such as isopropanol, EDTA-2Na and benzoquinone inhibited MB degradation. Finally, the results showed that these materials can be reused several times without a notable decrease in efficiency.

Enhancement of Fenton processes at initial circumneutral pH for the degradation of norfloxacin with Fe@Fe2O3 core-shell nanomaterials

The degradation of norfloxacin by Fenton reagent with core-shell Fe@Fe₂O₃ nanomaterials was studied under neutral conditions in a closed batch system. Norfloxacin was significantly degraded (90%) in the Fenton system with Fe@Fe₂O₃ in 30 min at the initial pH 7.0, but slightly degraded in Fenton system without Fe@Fe₂O₃ under the same experimental conditions. The intermediate products were investigated by gas chromatography-mass spectrometry, and the possible Fenton oxidation pathway of norfloxacin in the presence of Fe@Fe₂O₃ nanowires was proposed. Electron spin resonance spectroscopy was used to identify and characterize the free radicals generated, and the mechanism for norfloxacin degradation was also revealed. Finally, the reusability and the stability of Fe@Fe₂O₃ nanomaterials were studied using x-ray diffraction and scanning electron microscope, which indicated that Fe@Fe₂O₃ is a stable catalyst and can be used repetitively in environmental pollution control.

Magnetic polymer-supported adsorbent with two functional adsorption sites for phosphate removal

In this paper, a new magnetic polymer-supported phosphate adsorbent MPVC-EDA-Ce was prepared by loading cerium (hydr)oxides onto ethylenediamine-functionalized polyvinyl chloride for the first time. MPVC-EDA-Ce showed excellent adsorption performances towards phosphate and easy recovery. The adsorption isotherm and kinetics of MPVC-EDA-Ce followed Langmuir monolayer model and the pseudo-second-order model, respectively. The pH results demonstrated that the MPVC-EDA-Ce could effectively remove phosphate in a wide range of pH with insignificant cerium leaching. Furthermore, analyses on adsorption mechanism and effect of competing anions demonstrated the formation of strong inner-sphere complexation between cerium (hydr)oxides and phosphate, which was a selective adsorption process, while positively charged quaternary ammonium groups adsorbed phosphate via relatively weak electrostatic attraction which was a non-selective adsorption process. The study provided a good reference to design novel phosphate adsorbents with two even more functional adsorption sites and a deep insight to investigate the adsorption mechanism towards phosphate.

Response of phytoplankton to banana cultivation: A case study of Lancang-Mekong River, southwestern China

This study examined the possible effects of banana cultivation on phytoplankton biomass and community structure in southwest China along the Lancang-Mekong River. Water and phytoplankton samples were collected on March (dry season) and August (rainy season), and physical-chemical properties of water, phytoplankton biomass and community structure were determined. The results indicated that the banana cultivation resulted in increases in sediment, total phosphorus (TP) and total nitrogen (TN) concentrations at estuaries of Lancang-Mekong River branches. Cultivation decreased phytoplankton diversity, abundance and biomass, as well as changed the phytoplankton community structure at estuaries of branches. Sediment concentration (increased by cultivation) was considered as the dominant influence factor of phytoplankton biomass and community structure. However, at downstream sites (primary channel), banana cultivation did not cause (result from its huge flow) the significant changes in physical-chemical properties of water, phytoplankton biomass or community structure.

Enhanced degradation of 1-naphthol in landfill leachate using Arthrobacter sp

Arthrobacter sp. named as JY5-1 isolated from contaminated soil of a coking plant can degrade 1-naphthol as the sole carbon source. Through identification of species, analysis of the optimal degradation condition and kinetic equation, the degradation characteristic of Arthrobacter sp. JY5-1 was obtained. Later, the acclimated strain was added into the bio-reactor to observe treatment performance of landfill leachate. The results showed that the optimal conditions for strain JY5-1 biodegradation in the study were pH 7.0 and 30^oC. The bio-reactor operation experiment declared that Arthrobacter sp. JY5-1 had a strengthened effect on COD removal of landfill leachate. Moreover, the efficiency of COD removal could be high and stable when JY5-1 was accumulated as a biofilm together with active sludge. These results demonstrate that adding 1-naphthol-degrading strain JY5-1 is a feasible technique for the enhanced treatment of sanitary landfill leachate, providing theoretical support for engineering utilization.

Rh/polymeric carbon nitride porous tubular catalyst: visible light enhanced chlorophenol hydrodechlorination in base-free aqueous medium

Novel porous tubular Rh/PCN exhibited highly promoted activity in hydrodechlorination of harmful chlorophenols to high-value cyclohexanol and cyclohexanone with base-free aqueous medium and balloon H₂ pressure under the irradiation of visible light.

Difunctional chitosan-stabilized Fe/Cu bimetallic nanoparticles for removal of hexavalent chromium wastewater

Bimetallic Fe/Cu nanoparticles were successfully stabilized by chitosan used for remediating hexavatlent chromium contaminated wasterwater. However, the over-loaded chitosan on the surface of Fe/Cu particles limited the Cr(VI) reduction due to the occupation of the surface reactive sites. Weighing the colloid stability and the reduction reactivity, the optimal dosage of chitosan is 2.0 wt% and the optimal Cu doping dosage is 3.0 wt%. SEM and TEM images showed that the chitosan-stabilized Fe/Cu bimetallic nanoparticles (CS-Fe/Cu nanoparticles) were uniformly dispersed, which had loose and porous surface. FTIR characterization showed that the binding sites of nZVI and chitosan. XRD demonstrated that the presence of copper and chitosan did not change the existence form of zero-valent iron. Most importantly, the contribution of chitosan and Cu in the removal mechanism was studied by the reduction experiments and the XPS analysis. On the one hand, chitosan could effectively combine with Cr(VI) due to chelation, on the other hand, Cu played an important role in the precipitation and coprecipitation phenomena. These findings indicate that CS-Fe/Cu has the potential to be a promising material for wastewater treatment.

Voltammetric Biosensor Based on Nitrogen-doped Ordered Mesoporous Carbon for Detection of Organophosphorus Pesticides in Vegetables

Background:

Pesticides residues in agricultural products have posed a serious threat to food safety and human health, so it is necessary to develop a rapid and accurate method to detect pesticide in the environment. N-OMC with excellent electroconductivity, high biocompatibility and the functional amino group that can be covalently attached to the enzyme can be applied to construct a sensitive and stable acetylcholinesterase biosensor for rapid and accurate detection of organophosphorus pesticides with the help of L-cysteine self-assembled monolayer and AuNPs.

Methods:

Transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption measurements are used to characterize materials. Electrochemical impedance spectroscopy and cyclic voltammetry are used to study the surface features of modified electrodes. Differential pulse voltammetric is used to measure the peak current of modified electrodes. GC-MS is applied to verify the reliability of the prepared biosensor for organophosphorus pesticides detection.

Results:

N-OMC was synthesized and applied to constructed stable and sensitive acetylcholinesterase biosensors. The combination of N-OMC, L-cysteine self-assembled monolayer and AuNPs to modify the electrode surface has greatly improved the conductivity of biosensor and provided a stable platform for acetylcholinesterase immobilization. The linear detection range of paraoxon was from 3 to 24 nM with a lower detection limit of 0.02 nM.

Conclusion:

The biosensor exhibited satisfactory reproducibility, repeatability and stability, and was successfully employed to determine the paraoxon in vegetables as well as tap water samples, providing a promising tool for rapid and sensitive detection of organophosphorus pesticides in agricultural products.

Applications and factors influencing of the persulfate-based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

Persulfate is the latest oxidant which is being used increasingly for the remediation of groundwater and soil contaminated with organic compounds. It is of great significant to offer readers a general summary about different methods of activating persulfate, mainly including heat-activated, metal ions-activated, UV-activated, and alkaline-activated. Meanwhile, in addition to persulfate concentration as an influencing factor for persulfate oxidation process, selected information like temperature, anions, cations, pH, and humic acid are presented and discussed. The last section focuses on the advantages of different activated persulfate processes, and the suggestions and research needs for persulfate-based advanced oxidation in the remediation of polluted groundwater and soil.

Poly (γ-Glutamic Acid) Promotes Enhanced Dechlorination of p-Chlorophenol by Fe-Pd Nanoparticles

Nanoscale zero-valent iron (nZVI) has shown considerable promise in the treatment of chlorinated organic compounds, but rapid aggregation and inactivation hinder its application. In this study, palladium-doped zero-valent iron nanoparticles involving poly (γ-glutamic acid) (Fe-Pd@PGA NPs) were synthesized. The nanoparticles were small (~100 nm), uniformly distributed, and highly stable. The dechlorination performance of Fe-Pd@PGA NPs was evaluated using p-CP as a model. The results demonstrated that Fe-Pd@PGA NPs show high activity even in weakly alkaline conditions. The maximum rate constant reached 0.331 min^- 1 at pH 9.0 with a Fe to p-CP ratio of 100. Additionally, the dechlorination activity of Fe-Pd@PGA NPs is more than ten times higher than that of the bare Fe-Pd NPs, demonstrating the crucial role of PGA in this system. Furthermore, we investigated the dechlorination performance in the presence of different anions. The results indicated that Fe-Pd@PGA NPs can maintain high activity in the presence of Cl^-, H₂PO₄^-, and humic acid, while HPO₄^2-and HCO₃^- ions slightly reduce the dechlorination activity. We believed that PGA is a promising stabilizer and promoter for Fe-Pd NPs and the Fe-Pd@PGA NPs have the potential for practical applications.

Selenium contamination, consequences and remediation techniques in water and soils: A review

Selenium (Se) contamination in surface and ground water in numerous river basins has become a critical problem worldwide in recent years. The exposure to Se, either direct consumption of Se or indirectly may be fatal to the human health because of its toxicity. The review begins with an introduction of Se chemistry, distribution and health threats, which are essential to the remediation techniques. Then, the review provides the recent and common removal techniques for Se, including reduction techniques, phytoremediation, bioremediation, coagulation-flocculation, electrocoagulation (EC), electrochemical methods, adsorption, coprecipitation, electrokinetics, membrance technology, and chemical precipitation. Removal techniques concentrate on the advantages, drawbacks and the recent achievements of each technique. The review also takes an overall consideration of experimental conditions, comparison criteria and economic aspects.

Remediation of contaminated soils by enhanced nanoscale zero valent iron

The use of nanoscale zero valent iron (nZVI) for in situ remediation of soil contamination caused by heavy metals and organic pollutants has drawn great concern, primarily owing to its potential for excellent activity, low cost and low toxicity. This reviews considers recent advances in our understanding of the role of nZVI and enhanced nZVI strategy in the remediation of heavy metals and persistent organic contaminants polluted soil. The performance, the migration and transformation of nZVI affected by the soil physical and chemical conditions are summarized. However, the addition of nZVI inevitably disturbs the soil ecosystem, thus the impacts of nZVI on soil organisms are discussed. In order to further investigate the remediation effect of nZVI, physical, chemical and biological method combination with nZVI was developed to enhance the performance of nZVI. From a high efficient and environmentally friendly perspective, biological method enhanced nZVI technology will be future research needs. Possible improvement of nZVI-based materials and potential areas for further applications in soil remediation are also proposed.

Insight into highly efficient co-removal of p-nitrophenol and lead by nitrogen-functionalized magnetic ordered mesoporous carbon: Performance and modelling

Highly efficient simultaneous removal of Pb(II) and p-nitrophenol (PNP) contamination from water was accomplished by nitrogen-functionalized magnetic ordered mesoporous carbon (N-Fe/OMC). The mutual effects and inner mechanisms of their adsorption onto N-Fe/OMC were systematically investigated by sole and binary systems, and thermodynamic, sorption isotherm and adsorption kinetics models. The liquid-film diffusion step might be the rate-limiting step for PNP and Pb(II). The fitting of experimental data with Temkin model indicates that the adsorption process of PNP and Pb(II) involve physisorption and chemisorption. There exist site competition and enhancement of PNP and Pb(II) on the sorption to N-Fe/OMC. Moreover, N-Fe/OMC could be regenerated effectively and recycled by using dilute NaOH and acetone. These demonstrated superior properties of N-Fe/OMC indicate that it could be applied to treatment of wastewaters containing both lead and PNP.

Metallic cobalt nanoparticles imbedded into ordered mesoporous carbon: A non-precious metal catalyst with excellent hydrogenation performance

Ordered mesoporous carbon (OMC)-metal composites have attracted great attention owing to their combination of high surface area, controlled pore size distribution and physicochemical properties of metals. Herein, we report the cobalt nanoparticles/ordered mesoporous carbon (CoNPs@OMC) composite prepared by a one-step carbonization/reduction process assisted by a hydrothermal pre-reaction. The CoNPs@OMC composite presents a high specific surface area of 544m²g^-1, and the CoNPs are uniformly imbedded or confined in the ordered mesoporous carbon matrix. When used as a non-precious metal-containing catalyst for hydrogenation reduction of p-nitrophenol and nitrobenzene, it demonstrates high efficiency and good cycling stability. Furthermore, the CoNPs@OMC composite can be directly used to catalyze the Fischer-Tropsch synthesis for the high-pressure CO hydrogenation, and presents a good catalytic selectivity for C₅⁺ hydrocarbons. The excellent catalytic performance of the CoNPs@OMC composite can be ascribed to synergistic effect between the high specific surface area, mesoporous structure and well-imbedded CoNPs in the carbon matrix.

Treatment of arsenic in acid wastewater and river sediment by Fe@Fe2O3 nanobunches: The effect of environmental conditions and reaction mechanism

High concentration of arsenic in acid wastewater and polluted river sediment caused by metallurgical industry has presented a great environmental challenge for decades. Nanoscale zero valent iron (nZVI) can detoxify arsenic-bearing wastewater and groundwater, but the low adsorption capacity and rapid passivation restrict its large-scale application. This study proposed a highly efficient arsenic treatment nanotechnology, using the core-shell Fe@Fe₂O₃ nanobunches (NBZI) for removal of arsenic in acid wastewater with cyclic stability and transformation of arsenic speciation in sediment. The adsorption capacity of As(III) by NBZI was 60 times as high as that of nanoscale zero valent iron (nZVI) at neutral pH. Characterization of the prepared materials after reaction revealed that the contents of As(III) and As(V) were 65% and 35% under aerobic conditions, respectively, which is the evidence of oxidation included in the reaction process apart from adsorption and co-precipitation. The presence of oxygen was proved to improve the adsorption ability of the prepared NBZI towards As(III) with the removal efficiency increasing from 68% to 92%. In order to further enhance the performance of NBZI-2 in the absence of oxygen, a new Fenton-Like system of NBZI/H₂O₂ to remove arsenic under the anoxic condition was also proposed. Furthermore, the removal efficiency of arsenic in acid wastewater remained to be 78% after 9 times of cycling. Meanwhile, most of the mobile fraction of arsenic in river sediment was transformed into residues after NBZI treatment for 20 days. The reaction mechanism between NBZI and arsenic was discussed in detail at last, indicating great potential of NBZI for the treatment of arsenic in wastewater and sediment.

Simultaneous removal of atrazine and copper using polyacrylic acid-functionalized magnetic ordered mesoporous carbon from water: adsorption mechanism

Highly efficient simultaneous removal of atrazine and Cu(II) was accomplished using synthesized polyacrylic acid-functionalized magnetic ordered mesoporous carbon (P-MMC) as compared to magnetic ordered mesoporous carbon (MMC) and ordered mesoporous carbon (OMC). The mutual effects and interactive mechanism of their adsorption onto P-MMC were investigated systematically by binary, preloading and thermodynamic adsorption procedures. In both binary and preloading systems, the adsorption of atrazine was inhibited to some extent by the presence of Cu(II) because of selective recognition and direct competition, but the presence of atrazine had negligible effect on Cu(II) desorption. With the coexistence of humic acid (0–20 mg L⁻¹), both atrazine and Cu(II) sorption increased slightly in sole and binary systems. With the concentration of coexisting NaCl increasing from 0 to 100 mM, the adsorption capacity for Cu(II) slightly decreased, but as for atrazine adsorption, it decreased at first, and then increased slightly in sole and binary systems. P-MMC was applied to treat real environmental samples, and the sorption capacities for atrazine and Cu(II) in real samples were all more than 91.47% and 96.43% of those in lab ultrapure water, respectively. Finally, comprehensively considering the relatively good renewability and the superior behavior in the application to real water samples, P-MMC has potential in removal of atrazine, Cu(II) and possibly other persistent organic pollutants from wastewater.

Iron encapsulated in 3D N-doped carbon nanotube/porous carbon hybrid from waste biomass for enhanced oxidative activity

Novel iron encapsulated in nitrogen-doped carbon nanotubes (CNTs) supported on porous carbon (Fe@N-C) 3D structured materials for degrading organic pollutants were fabricated from a renewable, low-cost biomass, melamine, and iron salt as the precursors. SEM and TEM micrographs show that iron encapsulated bamboo shaped CNTs are vertically standing on carbon sheets, and thus, a 3D hybrid was formed. The catalytic activities of the prepared samples were thoroughly evaluated by activation of peroxymonosulfate for catalytic oxidation of Orange II solutions. The influences of some reaction conditions (pH, temperature, and concentrations of reactants, peroxymonosulfate, and dye) were extensively evaluated. It was revealed that the adsorption could enrich the pollutant which was then rapidly degraded by the catalytically generated radicals, accelerating the continuous adsorption of residual pollutant. Remarkable carbon structure, introduction of CNTs, and N/Fe doping result in promoted adsorption capability and catalytic performances. Due to the simple synthetic process and cheap carbon precursor, Fe@N-C 3D hybrid can be easily scaled up and promote the development of Fenton-like catalysts.

Titanium dioxide nanotube arrays with silane coupling agent modification for heavy metal reduction and persistent organic pollutant degradation

TiO₂ catalysts have gained extensive attention owing to their excellent catalytic ability, relatively stable physical and chemical properties and competitive price.

A highly effective Ag–RANEY® nickel hybrid catalyst for reduction of nitrofurazone and aromatic nitro compounds in aqueous solution

RANEY® nickel reduced Ag⁺ ions to form ultrafine spherical silver nanoparticles over itself, and the obtained hybrid material was used as catalyst for efficient and selective reduction of nitro compounds, in aqueous solution by using NaBH₄.

New insights into the activity of a biochar supported nanoscale zerovalent iron composite and nanoscale zero valent iron under anaerobic or aerobic conditions

To gain insight into the mechanism of p-nitrophenol removal using the biochar supported nanoscale zerovalent iron composite and nanoscale zero valent iron under anaerobic or aerobic conditions, batch experiments and models were conducted.

pH-dependent degradation of p-nitrophenol by sulfidated nanoscale zerovalent iron under aerobic or anoxic conditions

Sulfidated nanoscale zerovalent iron (S-NZVI) is attracting considerable attention due to its easy production and high reactivity to pollutants. We studied the reactivity of optimized S-NZVI (Fe/S molar ratio 6.9), comparing with pristine nanoscale zerovalent iron (NZVI), at various pH solutions (6.77-9.11) towards p-nitrophenol (PNP) under aerobic and anoxic conditions. Studies showed that the optimized extent of sulfidation could utterly enhance PNP degradation compared to NZVI. Batch experiments indicated that in anoxic S-NZVI systems the degradation rate constant increased with increasing pH up to 7.60, and then declined. However, in aerobic S-NZVI, and in anoxic or aerobic NZVI systems, it decreased as pH increased. It was manifested that anoxic S-NZVI systems preferred to weaker alkaline solutions, whereas aerobic S-NZVI systems performed better in acidic solutions. The highest TOC removal efficiency of PNP (17.59%) was achieved in the aerobic S-NZVI system at pH 6.77, revealing that oxygen improved the degradation of PNP by excessive amounts of hydroxyl radicals in slightly acidic conditions, and the TOC removal efficiency was supposed to be further improved in moderate acidic solutions. Acetic acid, a nontoxic ring opening by-product, confirms that the S-NZVI system could be a promising process for industrial wastewater containing sulfide ions.

Catalytic reduction of hexavalent chromium by a novel nitrogen-functionalized magnetic ordered mesoporous carbon doped with Pd nanoparticles

Hexavalent chromium Cr(VI) is a toxic water pollutant which can cause serious influence to the health of the human and animals. Therefore, developing new methods to remove hexavalent chromium in water attracts great attention of scholars. In our research, we successfully synthesized a new type of magnetic mesoporous carbon hybrid nitrogen (Fe-NMC) loaded with catalyst Pd nanoparticles (NPs), which performed excellent catalytic reduction efficiency toward Cr(VI). The characterization of Pd/Fe-NMC composite was investigated in detail using scanning electron microscope (SEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption measurements. According to the experimental results, we dealt with in-depth discussion and studied on the mechanism of hexavalent chromium removed by Pd/Fe-NMC composite. Furthermore, the batch experiments were conducted to investigate the catalytic reduction ability of composite. It was found that the chromium reduction process conforms to pseudo-first-order reaction kinetics model when the concentrations of chromium and sodium formate were low. It took only 20 min for the Pd/Fe-NMC composite to reach 99.8 % reduction of Cr(VI) (50 mg/L). The results suggested that the Pd/Fe-NMC composite may exhibit significantly improved catalytic activity for the hexavalent chromium reduction at industrial wastewater.