Photochemical behavior of antibiotics impacted by complexation effects of concomitant metals: a case for ciprofloxacin and Cu(II)

Comparing the photodegradation of typical antibiotics in ice and in water: Degradation kinetics, mechanisms, and effects of dissolved substances

New antibiotic contaminants have been detected in both surface waters and natural ice across cold regions. However, few studies have revealed distinctions between their ice and aqueous photochemistry. In this study, the photodegradation and effects of the main dissolved substances on the photolytic kinetics were investigated for sulfonamides (SAs) and fluoroquinolones (FQs) in ice/water under simulated sunlight. The results showed that the photolysis of sulfamethizole (SMT), sulfachloropyridazine (SCP), enrofloxacin (ENR) and difloxacin (DIF) in ice/water followed the pseudo-first-order kinetics with their quantum yields ranging from 4.93 × 10-3 to 11.15 × 10-2. The individual antibiotics experienced disparate photodegradation rates in ice and in water. This divergence was attributed to the concentration-enhancing effect and the solvent cage effect that occurred in the freezing process. Moreover, the main constituents (Cl-, HASS, NO3- and Fe(III)) exhibited varying degrees of promotion or inhibition on the photodegradation of SAs and FQs in the two phases (p < 0.05), and these effects were dependent on the individual antibiotics and the matrix. Extrapolation of the laboratory data to the field conditions provided a reasonable estimate of environmental photolytic half-lives (t1/2,E) during midsummer and midwinter in cold regions. The estimated t1/2,E values ranged from 0.02 h for ENR to 14 h for SCP, which depended on the reaction phases, latitudes and seasons. These results revealed the similarities and differences between the ice and aqueous photochemistry of antibiotics, which is important for the accurate assessment of the fate and risk of these new pollutants in cold environments.

Photodegradation of organic micropollutants in aquatic environment: Importance, factors and processes

Photochemical reactions widely occur in the aquatic environment and play fundamental roles in aquatic ecosystems. In particular, solar-induced photodegradation is efficient for many organic micropollutants (OMPs), especially those that cannot undergo hydrolysis or biodegradation, and thus can mitigate chemical pollution. Recent reports indicate that photodegradation may play a more important role than biodegradation in many OMP transformations in the aquatic environment. Photodegradation can be influenced by the water matrix such as pH, inorganic ions, and dissolved organic matter (DOM). The effect of the water matrix such as DOM on photodegradation is complex, and new insights concerning the disparate effects of DOM have recently been reported. In addition, the photodegradation process is also influenced by physical factors such as latitude, water depth, and temporal variations in sunlight as these factors determine the light conditions. However, it remains challenging to gain an overview of the importance of photodegradation in the aquatic environment because the reactions involved are diverse and complex. Therefore, this review provides a concise summary of the importance of photodegradation and the major processes related to the photodegradation of OMPs, with particular attention given to recent progress on the major reactions of DOM. In addition, major knowledge gaps in this field of environmental photochemistry are highlighted.

Possibilities and Limitations of the Sono-Fenton Process Using Mid-High-Frequency Ultrasound for the Degradation of Organic Pollutants

Mid-high-frequency ultrasound (200-1000 kHz) eliminates organic pollutants and also generates H₂O₂. To take advantage of H₂O₂, iron species can be added, generating a hybrid sono-Fenton process (sF). This paper presents the possibilities and limitations of sF. Heterogeneous (a natural mineral) and homogeneous (Fe²⁺ and Fe³⁺ ions) iron sources were considered. Acetaminophen, ciprofloxacin, and methyl orange were the target organic pollutants. Ultrasound alone induced the pollutants degradation, and the dual competing role of the natural mineral (0.02-0.20 g L^-1) meant that it had no significant effects on the elimination of pollutants. In contrast, both Fe²⁺ and Fe³⁺ ions enhanced the pollutants' degradation, and the elimination using Fe²⁺ was better because of its higher reactivity toward H₂O₂. However, the enhancement decreased at high Fe²⁺ concentrations (e.g., 5 mg L^-1) because of scavenger effects. The Fe²⁺ addition significantly accelerated the elimination of acetaminophen and methyl orange. For ciprofloxacin, at short treatment times, the degradation was enhanced, but the pollutant complexation with Fe³⁺ that came from the Fenton reaction caused degradation to stop. Additionally, sF did not decrease the antimicrobial activity associated with ciprofloxacin, whereas ultrasound alone did. Therefore, the chemical structure of the pollutant plays a crucial role in the feasibility of the sF process.

Effect of Different Lead and Cadmium Salts on the Photolytic Degradation of Two Typical Fluoroquinolones under Natural Sunlight Irradiation

This study investigated the effects of different lead and cadmium salts (Pb(NO₃)₂, Cd(NO₃)₂, PbCl₂, and CdCl₂) on the photolytic degradation of two typical fluoroquinolones (levofloxacin (LVF) and norfloxacin (NOR)) under natural sunlight irradiation. Their half-life time and photolytic kinetic constants (k) were calculated at different molar ratios. The results indicated that the photolytic degradation curves of LVF and NOR followed apparent first-order kinetics. After 42 days of sunlight irradiation, approximately 48.3-69.4% of NOR was decomposed when the initial concentration increased from 0.006 to 0.06 mmol/L. In comparison, only 9.8-43.4% of LVF was decomposed. The k of NOR ranged from 0.79 × 10^-3 to 1.30 × 10^-3 h^-1, and the k of LVF increased from 6.82 × 10^-4 to 1.61 × 10^-4 h^-1. Compared with the control, the Pb²⁺ and Cd²⁺ participation tended to enhance the LVF and NOR photodegradation. The effects of Cd²⁺ on the photodegradation efficiency were more significant than those of Pb²⁺. It was inferred that the presence of aqueous NO₃^- obviously suppressed the NOR degradation, but Cl^- had slight effects on these two fluoroquinolones' photodegradation. These results are of importance toward the understanding of the persistence of FQs under natural sunlight irradiation in surface waters.

Aquatic photochemistry of Cu(II) in the presence of As(III): Mechanistic insights from Cu(III) production and As(III) oxidation under neutral pH conditions

Surface complexation between arsenite (As(III)) and colloidal metal hydroxides plays an important role not only in the immobilization and oxidation of As(III) but also in the cycle of the metal and the fate of their ligands. However, the photochemical processes between Cu(II) and As(III) are not sufficiently understood. In this work, the photooxidation of As(III) in the presence of Cu(II) under neutral pH conditions was investigated in water containing 200 μM Cu(II) and 5 μM As(III) under simulated solar irradiation consisting of UVB light. The results confirmed the complexation between As(III) and Cu(II) hydroxides, and the photooxidation of As(III) is attributed to the ligand-to-metal charge transfer (LMCT) process and Cu(III) oxidation. The light-induced LMCT process results in simultaneous As(III) oxidation and Cu(II) reduction, then produced Cu(I) undergoes autooxidation with O₂ to produce O₂^•⁻ and H₂O₂, and further the Cu(I)-Fenton reaction produces Cu(III) that can oxidize As(III) efficiently (k_{Cu(III)+As(III)} = 1.02 × 10⁹ M^-1 s^-1). The contributions from each pathway (ρ_{rCu(II)-As(III)+hv} = 0.62, ρ_{rCu(III)+As(III)} = 0.38) were obtained using kinetic analysis and simulation. Sunlight experiments showed that the pH range of As(III) oxidation could be extended to weak acidic conditions in downstream water from acid mine drainage (AMD). This work helps to understand the environmental chemistry of Cu(II) and As(III) regarding their interaction and photo-induced redox reactions.

Photocatalytic degradation of persistent organic pollutants by Co-Cl bond reinforced CoAl-LDH/Bi12O17Cl2 photocatalyst: mechanism and application prospect evaluation

The widespread distribution of persistent organic pollutants (POPs) in natural waters has aroused global concern due to their potential threat to the aquatic environment. Photocatalysis represents a promising mean to remediate polluted waters with the simple assistance of solar energy. Herein, we fabricated a Co-Cl bond reinforced CoAl-LDH/Bi₁₂O₁₇Cl₂ heterogeneous photocatalyst to investigate the feasibility of photocatalysis to treat POPs-polluted water under environmental conditions. The optimum CoAl-LDH/Bi₁₂O₁₇Cl₂ (5-LB) composite photocatalyst exhibited excellent photocatalytic performance, which could degrade 92.47 % of ciprofloxacin (CIP) and 95 % of bisphenol A (BPA) with 2h of actual solar light irradiation in Changsha, China (N 28.12 °, E 112.59 °). In view of the synergistic influence of water constituents, various water matrices greatly affected the degradation rate of CIP (BPA), with the degradation efficiency of 82.17% (84.37%) in tap water, 69.67% (71.63%) in wastewater effluent, and 44.07% (67.7%) in wastewater inflow. The results of electron spin resonance, and chemical trapping experiment, HPLC-MS and density functional theory calculation reflected that the degradation of CIP was mainly attributed to h⁺ and ¹O₂ attacking the active atoms of CIP molecule with high Fukui index. Furthermore, the non-toxicity of both 5-LB photocatalyst and treated CIP solution was proved by E.coli and B.subtilis cultivation, which further demonstrated the feasibility of the 5-LB to treat POPs in real water under irradiation of solar light.

Differential Sensing of Antibiotics Using Metal Ions and Gold Nanoclusters Based on TMB–H2O2 System

In the water system, antibiotic pollution significantly impacts the human body and the environment. Therefore, it is essential to quickly identify the types of antibiotics in the system and detect their concentration. It has been reported that many metal ions interact with antibiotics, and some of them can also change the enzyme-like catalytic properties of gold clusters (AuNCs). In the experiments, we found significant differences in the experimental results when different antibiotics and metal ions were placed in a TMB-H2O2 system with AuNCs as catalysts. Based on this result, we devised a simple and sensitive colorimetric method for the simultaneous detection of multiple antibiotics using AuNCs-metal ions as the sensor, a multifunctional microplate detector as the detection instrument, and LDA as the analytical method. This method was successfully applied for the identification of antibiotics and the detection of their concentrations in river water.

Bisulfite activated permanganate for oxidative water decontamination

Recently, bisulfite-activated permanganate (MnO₄^-; Mn(VII)) process has attracted considerable attention as a novel class of advanced oxidation technology for destruction of organic contaminants in water. However, disputes over the underlying activation mechanism as well as reactive species generated in the Mn(VII)/bisulfite system remain for a long period due to the fairly complex chemistry involved in this system. This article aims to present a critical review on scientific development of the Mn(VII)/bisulfite system, with particular focus on the generation and contribution of various reactive intermediates. Both reactive manganese species (RMnS) (i.e., soluble Mn(III), Mn(V), and Mn(VI)) and radical species (primarily SO₄^•-) are identified as the oxidizing components responsible for enhanced degradation of organic contaminants by the Mn(VII)/bisulfite system. Bisulfite plays a dual role of being an activating agent for reactive intermediates generation and acting as a complexing agent to stabilize RMnS. Solution chemistry (e.g., the [Mn(VII)]/[bisulfite] molar ratio, solution pH, the type of contaminants, ligands, and water matrix components) greatly impacts the generation and consumption of RMnS and radicals, thus influencing the degradation kinetics and pathways of organics. Particularly, dissolved oxygen (DO) is a vital factor for driving the oxidation of organics since the absence of DO can block the generation of SO₄^•- and meantime causes the consumption of RMnS by excess SO₃^•- as a strong reductant. Interestingly, ferrate (FeO₄^2-, Fe(VI)) and hexavalent chromium (CrO₄^2-/HCrO₄^-, Cr(VI)) that are high-valent metal oxyanions analogous to Mn(VII) can be activated by bisulfite via a similar pathway (i.e. both high-valent metal-oxo intermediates and reactive radicals are involved). Furthermore, key knowledge gaps are identified and future research needs are proposed to address the potential challenges encountered in practical application of the Mn(VII)/bisulfite oxidation technology.

Antibiotics in Aquaculture Wastewater: Is It Feasible to Use a Photodegradation-Based Treatment for Their Removal?

Aquacultures are a sector facing a huge development: farmers usually applying antibiotics to treat and/or prevent diseases. Consequently, effluents from aquaculture represent a source of antibiotics for receiving waters, where they pose a potential threat due to antimicrobial resistance (AMR) induction. This has recently become a major concern and it is expectable that regulations on antibiotics’ discharge will be established in the near future. Therefore, it is urgent to develop treatments for their removal from wastewater. Among the different possibilities, photodegradation under solar radiation may be a sustainable option. Thus, this review aims at providing a survey on photolysis and photocatalysis in view of their application for the degradation of antibiotics from aquaculture wastewater. Experimental facts, factors affecting antibiotics’ removal and employed photocatalysts were hereby addressed. Moreover, gaps in this research area, as well as future challenges, were identified.

The application of UV/O3 process on ciprofloxacin wastewater containing high salinity: Performance and its degradation mechanism

The increasing discharge of high-salinity organic wastewater has drawn much concern. This work investigated the degradation and mineralization of ciprofloxacin (CIP) in high-salinity wastewater by ozonation coupled with ultraviolet irradiation (UV). After coupling with UV, the removal efficiency of CIP was increased insignificantly (maximum 5.0%), while the dissolved organic carbon (DOC) removal in CIP wastewater (CW) was enhanced dramatically to 91.4% as compared with independent O₃ (37.5%). The reactive oxygen species (ROS) were identified as singlet oxygen (¹O₂) and superoxide anion radical (O₂^-•)·through electron paramagnetic resonance (EPR) and quenching experiments, among which ¹O₂ predominated in the UV/O₃ process. The existence of salt (Na₂SO₄ or NaCl) accelerated the mass transfer of O₃ at the gas-liquid interface, thus CIP removal was promoted in UV/O₃/SO₄^2- system. However, excessive Cl^- inhibited the removal efficiency of DOC in CW owing to its consumption of O₃. CIP degradation decreased as pH increased in non-salinity and UV/O₃/SO₄^2- system, which proved the direct reaction occurred between CIP and O₃. On the contrary, the O₃ mass transfer increased with increasing pH, hence the elimination of DOC in CW was promoted in UV/O₃/Cl^- system. Volatile organic compounds (VOCs) were detected from tail gas, but the toxicity estimation indicated the toxicity of products was similar or less than that of CIP. Overall, this work is meaningful for the practical application of UV/O₃ process in the high-salinity industry.

Significant role of iron on the fate and photodegradation of enrofloxacin

Enrofloxacin (ENR) belongs to the fluoroquinolone (FQ) antibiotics family, which are contaminants of emerging concern frequently found in effluents. Although many works studying photo-Fenton process for FQ degradation have been reported, there are no reports analysing in deep the effect of iron complexation, as well as other metals, towards FQs' photolysis, which, evidently, also contributes in the overall degradation of the pollutant. Therefore, in this work, we report a comparative study between the photochemical fate of ENR and its complex with Fe(III) under simulated sunlight irradiation. In addition, the effect of dissolved oxygen, self-sensitization process, and H₂O₂ addition on the studied photochemical systems are also investigated. Results indicate that, for free and iron-complexed ENR, singlet oxygen (¹O₂) is generated from the interaction of its triplet state with ground state oxygen. Half-life time (t_1/2) of ENR under sun simulated conditions is estimated to be around 22 min, while complexation with iron enhances its photostability, leading to a t_1/2 of 2.1 h. Such finding indicates that at least the presence of iron, might notably increase the residence time of these pollutants in the environment. Eventually, only with the addition of H₂O₂, the FQ-iron complex is efficiently degraded due to photo-Fenton process even at circumneutral pH values due to the high stability of the formed complex. Finally, after LC/FT-ICR MS analysis, 39 photoproducts are detected, of which the 14 most abundant ones are identified. Results indicate that photoproducts formation is pH and iron dependent.

Fluorescence Spectroscopy and Chemometrics: A Simple and Easy Way for the Monitoring of Fluoroquinolone Mixture Degradation

In this work, fluorescence excitation-emission matrices (EEMs), in combination with the chemometric tool and parallel factor analysis (PARAFAC), have been proposed as an unexplored methodology to follow the removal of the fluorescent contaminants of emerging concern, fluoroquinolones (FQs). Ofloxacin, enrofloxacin, and sarafloxacin were degraded by different advanced oxidation processes employing simulated sunlight (hν): photolysis, H₂O₂/hν, and photo-Fenton. All experiments were performed in ultrapure water at three different pH values: 2.8, 5.0, and 7.0. With the obvious advantage of multivariate analysis methods, EEM-PARAFAC allowed the monitoring of degradation from the overall substances (original and formed ones) through simultaneous, rapid, and cost-efficient fluorescence spectroscopy determinations. A five-component model was found to best fit the experimental data, allowing us to (i) describe the decay of the fluorescence signals of the three parent pollutants, (ii) follow the kinetics profile of FQ-like byproducts with similar EEM fingerprints than the original FQs, and (iii) observe the formation of two families of reaction intermediates with completely different EEMs. Results were finally correlated with high pressure liquid chromatography, total organic carbon, and toxicity tests on Escherichia coli, showing good agreement with all the studied techniques.

Degradation of typical macrolide antibiotic roxithromycin by hydroxyl radical: kinetics, products, and toxicity assessment

The degradation of roxithromycin (ROX) by hydroxyl radical (·OH) generated by UV/H₂O₂ was systematically investigated in terms of degradation kinetics, effects of water chemistry parameters, oxidation products, as well as toxicity evaluation. The degradation of ROX by UV/H₂O₂ with varying light irradiation intensity, initial ROX concentration, and H₂O₂ concentration in pure water and wastewater all followed pseudo-first-order kinetics. The second-order rate constant for reaction between ROX and ·OH is 5.68 ± 0.34 × 10⁹/M/s. The degradation rate of ROX increased with the pH; for instance, the apparent degradation rates were 0.0162 and 0.0309/min for pH 4 and pH 9, respectively. The presence of natural organic matter (NOM) at its concentrations up to 10 mg C/L did not significantly affect the removal of ROX. NO₃^- and NO₂^- anions inhibited the degradation of ROX due to the consumption of ·OH in reactions with these ions. Fe³⁺, Cu²⁺, and Mg²⁺ cations inhibited the degradation of ROX, probably because of the formation of ROX-metal chelates. A total of ten degradation products were tentatively identified by HPLC/LTQ-Orbitrap XL MS, which mainly derived from the attack on the oxygen linking the lactone ring and the cladinose moiety, tertiary amine and oxime side chain moiety by ·OH. The toxicity evaluation revealed that UV/H₂O₂ treatment of ROX induced the toxicity to bioluminescent bacteria increased.

Density functional theory study of direct and indirect photodegradation mechanisms of sulfameter

Sulfonamide antibiotics (SAs) have been observed to undergo direct and indirect photodegradation in natural water environments. In this study, the density functional theory (DFT) method was employed for the study of direct and indirect photodegradation mechanisms of sulfameter (SME) with excited triplet states of dissolved organic matter ((3)DOM(*)) and metal ions. SME was adopted as a representative of SAs, and SO2 extrusion product was obtained with different energy paths in the triplet-sensitized photodegradation of the neutral (SME(0)) and the anionic (SME(-)) form of SME. The selected divalent metal ions (Ca(2+), Mg(2+), and Zn(2+)) promoted the triplet-sensitized photodegradation of SME(0) but showed an inhibitory effect in triplet-sensitized photodegradation of SME(-). The triplet-sensitized indirect photodegradation mechanism of SME was investigated with the three DOM analogues, i.e., 2-acetonaphthone (2-AN), fluorenone (FN), and thioxanthone (TN). Results indicated that the selected DOM analogues are highly responsible for the photodegradation via attacking on amine moiety of SME. According to the natural bond orbital (NBO) analysis, the triplet-sensitized photodegradation mechanism of SME(0) with 2-AN, FN, and TN was H-transfer, and the SME(-) was proton plus electron transfer with these DOM analogues.