In vitro study on the competitive reactions between arsenite and selenite with glutathione

Exposure to arsenic can cause various biological effects by increasing the production of reactive oxygen species (ROS). Selenium acts as a beneficial element by regulating ROS and limiting heavy metal uptake and translocation. There are studies on the interactive effects of As and Se in plants, but the antagonistic and synergistic effects of these elements based on their binding to glutathione (GSH) molecules have not been studied yet. In this study, we aimed to investigate the antagonistic or synergistic effects of As and Se on the binding mechanism of Se and As with GSH at pH 3.0, 5.0, or 6.5. The interaction of As and Se in Se(SG)2 + As(III) or As(SG)3 + Se(IV) binary systems and As(III) + Se(IV) + GSH ternary system were examined depending on their ratios via liquid chromatography diode array detector/electrospray mass spectrometry (LC-DAD/MS) and liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS). The results showed that the formation of As(GS)3 was not detected in the As(III) + Se(SG)2 binary system, indicating that As(III) did not affect the stability of Se(SG)2 complex antagonistically. However, in the Se(IV) + As(SG)3 binary system, the addition of Se(IV) to As(SG)3 affected the stability of As(SG)3 antagonistically. Se(IV) reacted with GSH, disrupting the As(SG)3 complex, and consequently, Se(SG)2 formation was measured using LC-MS/DAD. In the Se(IV) + GSH + As(III) ternary system, Se(SG)2 formation was detected upon mixing As(III), Se(IV), and GSH. The increase in the concentration of As(III) did not influence the stability of the Se(SG)2 complex. Additionally, Se(IV) has a higher affinity than As(III) to the GSH, regardless of the pH of the solution. In both binary and ternary systems, the formation of the by-product glutathione trisulfide (GSSSG) was detected using LC-ESI-MS/MS.

Isotopologue pattern based data mining for selenium species from HILIC-ESI-Orbitrap-MS-derived spectra

Automated and specific picking of selenium-containing molecular entities has not been an obvious option for software tools associated with electrospray high-resolution mass spectrometry (MS). In our study, a comprehensive pattern matching approach based on intra-isotopologue distance and isotopologue ratio data was critically evaluated in terms of reproducibility and selenium isotope selection on three samples, including selenized Torula yeast and the selenium hyperaccumulator plant Cardamine violifolia. Hydrophilic interaction liquid chromatography was applied to provide a one-step separation for water soluble metabolites to put an end to the need for either orthogonal setups or poor retention on reversed phase chromatography. Assistance from inductively coupled plasma-MS was taken only for chromatographic verification purposes, and the involvement of absolute mass defect (MD) data in selenometabolite-specific screening was assessed by multivariate statistical tools. High focus was placed on screening efficiency and on the validation of discovered selenized molecules to avoid reporting of artefacts. From the >1000 molecular entries detected, selenium-containing molecules were picked up with a recovery rate of >88% and a false positive rate of <10%. Isotop(ologu)e pairs of 78Se-80Se and 80Se-82Se proved to be the most performant in the detection. On the basis of accurate mass information and hypothetical deamination processes, elemental composition could be proposed for 72 species out of the 75 selenium species encountered without taking into account selenocompound databases. Absolute MD data were used to significantly differentiate a potentially sample-specific subgroup of false positive molecular entities from non-selenized and selenized entities.

Direct and indirect selenium speciation in biofortified wheat: A tale of two techniques

Wheat can be biofortified with different inorganic selenium (Se) forms, selenite or selenate. The choice of Se source influences the physiological response of the plant and the Se metabolites produced. We looked at selenium uptake, distribution and metabolization in wheat exposed to selenite, selenate and a 1:1 molar mixture of both to determine the impact of each treatment on the Se speciation in roots, shoots, and grains. To achieve a comprehensive quantification of the Se species, the complementarity of high-performance liquid chromatography coupled with inductively coupled plasma mass spectrometry and X-ray absorption spectroscopy was exploited. This approach allowed the identification of the six main selenium species: selenomethionine, selenocysteine, selenocystine, selenite, selenate, and elemental selenium. The three treatments resulted in similar total selenium concentration in grains, 90-150 mg Se kg^-1 , but produced different effects in the plant. Selenite enhanced root accumulation (66% of selenium) and induced the maximum toxicity, whereas selenate favored shoot translocation (46%). With the 1:1 mixture, selenium was distributed along the plant generating lower toxicity. Although all conditions resulted in >92% of organic selenium in the grain, selenate produced mainly C-Se-C forms, such as selenomethionine, while selenite (alone or in the mixture) enhanced the production of C-Se-Se-C forms, such as selenocystine, modifying the selenoamino acid composition. These results provide a better understanding of the metabolization of selenium species which is key to minimize plant toxicity and any concomitant effect that may arise due to Se-biofortification.

Facets of ICP-MS and their potential in the medical sciences-Part 1: fundamentals, stand-alone and hyphenated techniques

Since its inception in the early 80s, inductively coupled plasma–mass spectrometry has developed to the method of choice for the analysis of elements in complex biological systems. High sensitivity paired with isotopic selectivity and a vast dynamic range endorsed ICP-MS for the inquiry of metals in the context of biomedical questions. In a stand-alone configuration, it has optimal qualities for the biomonitoring of major, trace and toxicologically relevant elements and may further be employed for the characterisation of disrupted metabolic pathways in the context of diverse pathologies. The on-line coupling to laser ablation (LA) and chromatography expanded the scope and application range of ICP-MS and set benchmarks for accurate and quantitative speciation analysis and element bioimaging. Furthermore, isotopic analysis provided new avenues to reveal an altered metabolism, for the application of tracers and for calibration approaches. In the last two decades, the scope of ICP-MS was further expanded and inspired by the introduction of new instrumentation and methodologies including novel and improved hardware as well as immunochemical methods. These additions caused a paradigm shift for the biomedical application of ICP-MS and its impact in the medical sciences and enabled the analysis of individual cells, their microenvironment, nanomaterials considered for medical applications, analysis of biomolecules and the design of novel bioassays. These new facets are gradually recognised in the medical communities and several clinical trials are underway. Altogether, ICP-MS emerged as an extremely versatile technique with a vast potential to provide novel insights and complementary perspectives and to push the limits in the medical disciplines. This review will introduce the different facets of ICP-MS and will be divided into two parts. The first part will cover instrumental basics, technological advances, and fundamental considerations as well as traditional and current applications of ICP-MS and its hyphenated techniques in the context of biomonitoring, bioimaging and elemental speciation. The second part will build on this fundament and describe more recent directions with an emphasis on nanomedicine, immunochemistry, mass cytometry and novel bioassays.

Optimization of elemental selenium (Se(0)) determination in yeasts by anion-exchange HPLC-ICP-MS

An analytical method was developed for the speciation of elemental selenium (Se(0)) in selenized yeasts by anion-exchange HPLC-ICP-MS after its chemical transformation into SeSO₃^2- by reaction with sodium sulfite. The presence of Se(0) in the yeasts was further confirmed by single-particle ICP-MS. Indeed, Se nanoparticles, if present, are expected to be, at least partly, Se(0). X-ray photoelectron spectroscopy, a well-recognized technique for chemical element speciation in the solid state, was also used with this objective. Both methods were able to confirm the presence of Se(0) in the selenized yeasts but failed to provide reliable quantitative results. Analytical performances of the HPLC-ICP-MS method were then evaluated for Se(0) determination. Quantification limits of 1 mg/kg were reached. The recovery levels from an added quantity comprised between 93 and 101%. Within-run and between-run precisions were both below 8%. The procedure developed was finally applied to quantify Se(0) content in a series of seven yeast batches from different suppliers. Se(0) was found to be present in all the studied yeasts and represented on average 10-15% of the total Se.

Water soluble selenometabolome of Cardamine violifolia

Low molecular weight selenium containing metabolites in the leaves of the selenium hyperaccumulator Cardamine violifolia (261 mg total Se per kg d.w.) were targeted in this study. One dimensional cation exchange chromatography coupled to ICP-MS was used for purification and fractionation purposes prior to LC-Unispray-QTOF-MS analysis. The search for selenium species in full scan spectra was assisted with an automated mass defect based filtering approach. Besides selenocystathionine, selenohomocystine and its polyselenide derivative, a total number of 35 water soluble selenium metabolites other than selenolanthionine were encountered, including 30 previously unreported compounds. High occurrence of selenium containing hexoses was observed, together with the first assignment of N-glycoside derivatives of selenolanthionine. Quantification of the most abundant selenium species, selenolanthionine, was carried out with an ion pairing LC - post column isotope dilution ICP-MS setup, which revealed that this selenoamino acid accounted for 30% of the total selenium content of the leaf (78 mg (as Se) per kg d.w.).

Fungal formation of selenium and tellurium nanoparticles

The fungi Aureobasidium pullulans, Mortierella humilis, Trichoderma harzianum and Phoma glomerata were used to investigate the formation of selenium- and tellurium-containing nanoparticles during growth on selenium- and tellurium-containing media. Most organisms were able to grow on both selenium- and tellurium-containing media at concentrations of 1 mM resulting in extensive precipitation of elemental selenium and tellurium on fungal surfaces as observed by the red and black colour changes. Red or black deposits were confirmed as elemental selenium and tellurium, respectively. Selenium oxide and tellurium oxide were also found after growth of Trichoderma harzianum with 1 mM selenite and tellurite as well as the formation of elemental selenium and tellurium. The hyphal matrix provided nucleation sites for metalloid deposition with extracellular protein and extracellular polymeric substances localizing the resultant Se or Te nanoparticles. These findings are relevant to remedial treatments for selenium and tellurium and to novel approaches for selenium and tellurium biorecovery.

Selenolanthionine is the major water-soluble selenium compound in the selenium tolerant plant Cardamine violifolia

BACKGROUND

Selenium hyperaccumulation in plants often involves the synthesis of non-proteinaceous methylated selenoamino acids serving for the elimination of excess selenium from plant metabolism to protect plant homeostasis.

METHODS

Our study aimed at the identification of the main selenium species of the selenium hyperaccumulator plant Cardamine violifolia (Brassicaceae) that grows in the wild in the seleniferous region of Enshi, China. A sample of this plant (3.7 g Se kg^-1 d.w.) was prepared with several extraction methods and the extracted selenium species were identified and quantified with liquid chromatography mass spectrometry set-ups.

RESULTS

The Cardamine violifolia sample did not contain in considerable amount any of the organic selenium species that are often formed in hyperaccumulator plants; the inorganic selenium content (mostly as elemental selenium) accounted only for <20% of total Se. The most abundant selenium compound, accounting for about 40% of total Se was proved to be selenolanthionine, a selenium species that has never been unambiguously identified before from any selenium containing sample. The identification process was completed with chemical synthesis too. The molar ratio of lanthionine:selenolanthionine in the water extract was ca. 1:8.

CONCLUSIONS

Finding selenolanthionine as the main organic selenium species in a plant possibly unearths a new way of selenium tolerance. This article is part of a Special Issue entitled Selenium research in biochemistry and biophysics - 200 year anniversary issue, edited by Dr. Elias Arnér and Dr. Regina Brigelius-Flohe.

Importance of ICPMS for speciation analysis is changing: future trends for targeted and non-targeted element speciation analysis

This article is aimed at researchers interested in organic molecules which contain a heteroatom but who have never considered using inductively coupled plasma mass spectrometry (ICPMS) or who have used ICPMS for years and developed numerous methods for analysis of target elemental species. We try to illustrate (1) that ICPMS has been very useful for speciation analysis of metal(loid) target species and that there is now a trend to replace the costly detector with cheaper detection systems for routine target analysis, and (2) that ICPMS has been used and will be used even more in the future for non-targeted analysis of elements which are not normally associated with ICPMS analysis, such as non-metals such as sulfur, phosphorus, chlorine and fluorine.

Graphical Abstract

Influence of Se concentrations and species in hydroponic cultures on Se uptake, translocation and assimilation in non-accumulator ryegrass

The success of biofortification and phytoremediation practices, addressing Se deficiency and Se pollution issues, hinges crucially on the fate of selenium in the plant media in response to uptake, translocation and assimilation processes. We investigate the fate of selenium in root and shoot compartments after 3 and 6 weeks of experiment using a total of 128 plants grown in hydroponic solution supplied with 0.2, 2, 5, 20 and 100 mg L^-1 of selenium in the form of selenite, selenate and a mixture of both species. Selenate-treated plants exhibited higher root-to-shoot Se translocation and total Se uptake than selenite-treated plants. Plants took advantage of the selenate mobility and presumably of the storage capacity of leaf vacuoles to circumvent selenium toxicity within the plant. Surprisingly, 28% of selenate was found in shoots of selenite-treated plants, questioning the ability of plants to oxidize selenite into selenate. Selenomethionine and methylated organo-selenium amounted to 30% and 8% respectively in shoots and 35% and 9% in roots of the identified Se, suggesting that selenium metabolization occurred concomitantly in root and shoot plant compartments and demonstrating that non-accumulator plants can synthesize notable quantities of precursor compound for volatilization. The present study demonstrated that non-accumulator plants can develop the same strategies as hyper-accumulator plants to limit selenium toxicity. When both selenate and selenite were supplied together, plants used selenate in a storage pathway and selenite in an assimilation pathway. Plants might thereby benefit from mixed supplies of selenite and selenate by saving enzymes and energy required for selenate reduction.

The importance of glutathione and phytochelatins on the selenite and arsenate detoxification in Arabidopsis thaliana

We investigated the role of glutathione (GSH) and phytochelatins (PCs) on the detoxification of selenite using Arabidopsis thaliana. The wild-type (WT) of Arabidopsis thaliana and its mutants (glutathione deficient Cad 2-1 and phytochelatins deficient Cad 1-3) were separately exposed to varying concentrations of selenite and arsenate and jointly to both toxicants to determine their sensitivities. The results of the study revealed that, the mutants were about 20-fold more sensitive to arsenate than the WT, an indication that the GSH and PCs affect arsenate detoxification. On the contrary, the WT and both mutants showed a similar level of sensitivity to selenite, an indication that the GSH and PCs do not significantly affect selenite detoxification. However, the WT is about 8 times more sensitive to selenite than to arsenate, and the mutants were more resistant to selenite than arsenate by a factor of 2. This could not be explained by the accumulation of both elements in roots and shoots in exposure experiments. The co-exposure of the WT indicates a synergistic effect with regards to toxicity since selenite did not induce PCs but arsenic and selenium compete in their PC binding as revealed by speciation analysis of the root extracts using HPLC-ICP-MS/ESI-MS. In the absence of PCs an antagonistic effect has been detected which might suggest indirectly that the formation of Se glutathione complex prevent the formation of detrimental selenopeptides. This study, therefore, revealed that PC and GSH have only a subordinate role in the detoxification of selenite.