Graphene Quantum Dots: Green Synthesis, Characterization, and Antioxidant and Antimicrobial Potential

Antibiotic resistance is becoming more common, emphasising the demand for novel antibacterial treatments. The current investigation describes the green synthesis of graphene quantum dots (GQDs) using M. indica leaves and characterization via Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and ultraviolet-visible (UV-Vis) spectrophotometer. The results showed that GQDs are spherical in shape. In vitro antioxidant and antimicrobial studies indicate that the biological efficacy of synthesized GQDs was higher than the ethanolic leaf extract. GQDs exhibited the highest scavenging efficacy with lowest IC50 (half-maximal inhibitory concentration) value. However, antimicrobial study showed more inhibitory activity of GQDs against all screened microorganisms, i.e., Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa, and fungi, i.e., Aspergillus niger and Aspergillus flavus. Graphene quantum dots facilitate reactive oxygen species (ROS) which ultimately lead to antioxidant and antibacterial activity. This approach would provide an efficient alternate method for tackling microorganisms.

Sustainable Preparation of Graphene Quantum Dots from Leaves of Date Palm Tree

The date palm (Phoenix dactylifera), a subtropical and tropical tree, included in the family Palmae (Arecaceae) is one of the oldest cultivated plants of mankind. Date palm is a major agricultural product in the semi-arid and arid areas of the world, particularly in Arab countries. These trees generate high quantities of agricultural waste in the form of dry leaves, seeds, etc. In this study, dried date palm leaves were used as green precursors for synthesizing graphene quantum dots (GQDs). This work reported the preparation of GQDs using two different sustainable methods. GQD-1 was developed using a simple, hydrothermal technique at 200 °C for 12 h in water, with no requirement of reducing or passivizing agents or organic solvents. GQD-2 was prepared using a hydrothermal technique at 200 °C for 12 h in water, with the usage of just distilled water and absolute ethanol. The compositional analysis of the leaf extract was performed, along with the morphological, compositional, and optical examination of the sustainably developed GQDs. The characterization results confirmed the successful formation of GQDs, with average sizes ranging from 3.5 to 8 nm. This study helps to obtain GQDs in an economical, eco-friendly, and biocompatible manner and can assist in large-scale production and in recycling date palm tree waste products from Middle East countries into value-added products.

One-Pot Synthesis of Nitrogen-Doped Graphene Quantum Dots and Their Applications in Bioimaging and Detecting Copper Ions in Living Cells

Two natural carbon sources, glutamic acid and tyrosine, were used to fabricate strong green emission nitrogen-doped graphene quantum dots (N-GQDs) with the one-pot pyrolysis method. The morphology of the prepared GQDs has been characterized by high-resolution transmission electron microscopy, showing a well-displayed crystalline structure with a lattice spacing of 0.262 nm. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy were used to analyze the surface functional groups and elemental composition, suggesting that the N-GQDs have active carboxylic and amino functional groups. Meanwhile, photoluminescence and ultraviolet-visible (UV-vis) spectroscopy were used to evaluate the optical properties of GQDs; the prepared N-GQDs show an excitation-dependent fluorescence behavior with a maximum excitation/emission wavelength at 460/522 nm, respectively. N-GQDs showed good photostability and the fluorescence intensity quenched about 10% after irradiating 2800 s in the experiment of time kinetic analysis. The MTT assay was utilized to assess the viability of N-GQDs; good biocompatibility with a relatively high quantum yield of 12% demonstrated the potential for serving as bioimaging agents. Besides, the selectivity study on metal ions indicates that the N-GQDs could be used in Cu2+ detection. The linear range is from 0.1 to 10 μM with a limit of detection of 0.06 μM. Overall, these proposed N-GQDs with one-pot synthesis showed their promising potential in cell imaging and Cu2+ monitoring applications involved in the biological environment.

Sustainable Preparation of Graphene Quantum Dots for Metal Ion Sensing Application

Over the past several years, graphene quantum dots (GQDs) have been extensively studied in water treatment and sensing applications because of their exceptional structure-related properties, intrinsic inert carbon property, eco-friendly nature, etc. This work reported on the preparation of GQDs from the ethanolic extracts of eucalyptus tree leaves by a hydrothermal treatment technique. Different heat treatment times and temperatures were used during the hydrothermal treatment technique. The optical, morphological, and compositional analyses of the green-synthesized GQDs were carried out. It can be noted that the product yield of GQDs showed the maximum yield at a reaction temperature of 300 °C. Further, it was noted that at a treatment period of 480 min, the greatest product yield of about 44.34% was attained. The quantum yields of prepared GQDs obtained after 480 min of treatment at 300 °C (named as GQD/300) were noted to be 0.069. Moreover, the D/G ratio of GQD/300 was noted to be 0.532 and this suggested that the GQD/300 developed has a nano-crystalline graphite structure. The TEM images demonstrated the development of GQD/300 with sizes between 2.0 to 5.0 nm. Furthermore, it was noted that the GQD/300 can detect Fe³⁺ in a very selective manner, and hence the developed GQD/300 was successfully used for the metal ion sensing application.

Graphene Quantum Dot-Added Thin-Film Composite Membrane with Advanced Nanofibrous Support for Forward Osmosis

Forward osmosis (FO) technology for desalination has been extensively studied due to its immense benefits over conventionally used reverse osmosis. However, there are some challenges in this process such as a high reverse solute flux (RSF), low water flux, and poor chlorine resistance that must be properly addressed. These challenges in the FO process can be resolved through proper membrane design. This study describes the fabrication of thin-film composite (TFC) membranes with polyethersulfone solution blown-spun (SBS) nanofiber support and an incorporated selective layer of graphene quantum dots (GQDs). This is the first study to sustainably develop GQDs from banyan tree leaves for water treatment and to examine the chlorine resistance of a TFC FO membrane with SBS nanofiber support. Successful GQD formation was confirmed with different characterizations. The performance of the GQD-TFC-FO membrane was studied in terms of flux, long-term stability, and chlorine resistance. It was observed that the membrane with 0.05 wt.% of B-GQDs exhibited increased surface smoothness, hydrophilicity, water flux, salt rejection, and chlorine resistance, along with a low RSF and reduced solute flux compared with that of neat TFC membranes. The improvement can be attributed to the presence of GQDs in the polyamide layer and the utilization of SBS nanofibrous support in the TFC membrane. A simulation study was also carried out to validate the experimental data. The developed membrane has great potential in desalination and water treatment applications.

Multifunctional nanomaterials and nanocomposites for sensing and monitoring of environmentally hazardous heavy metal contaminants

The applications of conventional sensors are limited by the long response time, high cost, large detection limit, low sensitivity, complicated usage and low selectivity. These sensors are nowadays replaced by Nanocomposite-based modalities and nanomaterials which are known for their high selectivity and physical and chemical properties. These nanosensors effectively detect heavy metal contaminants in the environment as the discharge of heavy metals into natural water as a result of human activity has become a global epidemic. Exposure to these toxic metals might induce many health-related complications, including kidney failure, brain injury, immune disorders, muscle paleness, cardiac damage, nervous system impairment and limb paralysis. Therefore, designing and developing novel sensing systems for the detection and recognition of these harmful metals in various environmental matrices, particularly water, is of extremely important. Emerging nanotechnological approaches in the past two decades have played a key role in overcoming environmentally-related problems. Nanomaterial-based fabrication of chemical nanosensors has widely been applied as a powerful analytical tool for sensing heavy metals. Portability, high sensitivity, on-site detection capability, better device performance and selectivity are all advantages of these nanosensors. The detection and selectivity have been improved using molecular recognition probes for selective binding on different nanostructures. This study aims to evaluate the sensing properties of various nanomaterials such as metal-organic frameworks, fluorescent materials, metal-based nanoparticles, carbon-based nanomaterials and quantum dots and graphene-based nanomaterials and quantum dots for heavy metal ions recognition. All these nano-architectures are frequently served as effective fluorescence probes to directly (or by modification with some large or small biomolecules) sense heavy metal ions for improved selectivity. However, efforts are still needed for the simultaneous designing of multiple metal ion-based detection systems, exclusively in colorimetric or optical fluorescence nanosensors for heavy metal cations.

Spectrally tunable humic acid-based carbon dots: a simple platform for metronidazole and ornidazole sensing in multiple real samples

Humic acid-based carbon dots (HACDs) have excellent properties and are widely used in environmental detection, bioimaging, and optoelectronic materials. Herein, we investigated the structure-activity relationship between the morphology and optical properties of HACDs, and reported on a novel strategy for metronidazole (MNZ) and ornidazole (ONZ) sensing in multiple real samples. It was found that the average particle size decreased from 3.28 to 2.44 nm, optimal emission wavelength was blue-shifted from 500 to 440 nm, and the quantum yield (QY) improved from 5 to 23% with the temperature increasing from 110 to 400 °C. Under the oxidation of hydrogen peroxide (H₂O₂) and potassium permanganate (KMnO₄), the UV-vis spectra of HACD aqueous solution showed time-dependent behavior, and the fluorescence emission of HACDs achieved spectrally tunable multi-color luminescence in the temporal dimension. The surface of HACDs contained a large number of hydroxyl (-OH) and carboxyl (-COOH) fluorophores, resulting in excellent pH sensing. Meanwhile, the synthesized HACDs revealed sensitive response to MNZ and ONZ with the limit of detection (LOD) of 60 nM and 50 nM in aqueous solutions, which had also been successfully applied in various actual samples such as lake water, honey, eggs, and milk with satisfactory results because of the inner filter effect (IFE). Our research is advantageous to enhance the potential applications of HACDs in advanced analytical systems.

Graphene quantum dots: A review on the effect of synthesis parameters and theranostic applications

The rising demand for early-stage diagnosis of diseases such as cancer, diabetes, neurodegenerative can be met with the development of materials offering high sensitivity and specificity. Graphene quantum dots (GQDs) have been investigated extensively for theranostic applications owing to their superior photostability and high aqueous dispersibility. These are attractive for a range of biomedical applications as their physicochemical and optoelectronic properties can be tuned precisely. However, many aspects of these properties remain to be explored. In the present review, we have discussed the effect of synthetic parameters upon their physicochemical characteristics relevant to bioimaging. We have highlighted the effect of particle properties upon sensing of biological molecules through 'turn-on' and 'turn-off' fluorescence and generation of electrochemical signals. After describing the effect of surface chemistry and solution pH on optical properties, an inclusive view on application of GQDs in drug delivery and radiation therapy has been given. Finally, a brief overview on their application in gene therapy has also been included.

Applications of graphene-based electrochemical and optical biosensors in early detection of cancer biomarkers

Graphene is a one-atom-thick carbon compound, which holds promises for detecting cancer biomarkers along with its derivatives. The atom-wide graphene layer is ideal for cancer biomarker detection due to its unique physicochemical properties like increased electrical and thermal conductivity, optical transparency, and enhanced chemical and mechanical strength. The scientific aim of any biosensor is to create a smaller and portable point of care device for easy and early cancer detection; graphene is able to live up to that. Apart from tumour detection, graphene-based biosensors can diagnose many diseases, their biomarkers, and pathogens. Many existing remarkable pieces of research have proven the candidacy of nanoparticles in most cancer biomarkers detection. This article discusses the effectiveness of graphene-based biosensors in different cancer biomarker detection. This article provides a detailed review of graphene and its derivatives that can be used to detect cancer biomarkers with high specificity, sensitivity, and selectivity. We have highlighted the synthesis procedures of graphene and its products and also discussed their significant properties. Furthermore, we provided a detailed overview of the recent studies on cancer biomarker detection using graphene-based biosensors. The different paths to create and modify graphene surfaces for sensory applications have also been highlighted in each section. Finally, we concluded the review by discussing the existing challenges of these biosensors and also highlighted the steps that can be taken to overcome them.

Rapid detection of SARS-CoV-2 using graphene-based IoT integrated advanced electrochemical biosensor

Unique characteristics like large surface area, excellent conductivity, functionality, ease of fabrication, etc., of graphene and its derivatives, have been extensively studied as potential candidates in healthcare applications. They have been utilized as a potential nanomaterial in biosensor fabrication for commercialized point-of-care (POC) devices. This review concisely provided innovative graphene and its derivative-based-IoT (Internet-of-Things) integrated electrochemical biosensor for accurate and advanced high-throughput testing of SARS-CoV-2 in POC setting.

Analytical application of H 2 O 2 -induced chiroptical graphitic carbon dots

Carbon dots (CDs) have emerged as efficient peroxidase mimics in recent years. However, to further increase its efficiency as peroxidase-mimic, it is also desirable to understand the modification of CD’s geometry during the catalytic reaction. Herein, we focused on the change in material property of the CDs upon their reaction with H2O2 during the peroxidase reaction. D-(+)-glucose was transformed into chiroptical CDs bearing peroxidase-like activity and can be used to detect H2O2 with a limit of detection of 630 μM. The addition of H2O2 to the CDs resulted in its increased molecular orderliness leading to the introduction of polycrystallinity without affecting its peroxidase-like activity.

Natural Carbon Nanodots: Toxicity Assessment and Theranostic Biological Application

This review outlines the methods for preparing carbon dots (CDs) from various natural resources to select the process to produce CDs with the best biological application efficacy. The oxidative activity of CDs mainly involves photo-induced cell damage and the destruction of biofilm matrices through the production of reactive oxygen species (ROS), thereby causing cell auto-apoptosis. Recent research has found that CDs derived from organic carbon sources can treat cancer cells as effectively as conventional drugs without causing damage to normal cells. CDs obtained by heating a natural carbon source inherit properties similar to the carbon source from which they are derived. Importantly, these characteristics can be exploited to perform non-invasive targeted therapy on human cancers, avoiding the harm caused to the human body by conventional treatments. CDs are attractive for large-scale clinical applications. Water, herbs, plants, and probiotics are ideal carbon-containing sources that can be used to synthesize therapeutic and diagnostic CDs that have become the focus of attention due to their excellent light stability, fluorescence, good biocompatibility, and low toxicity. They can be applied as biosensors, bioimaging, diagnosis, and treatment applications. These advantages make CDs attractive for large-scale clinical application, providing new technologies and methods for disease occurrence, diagnosis, and treatment research.

Shedding Light on Graphene Quantum Dots: Key Synthetic Strategies, Characterization Tools, and Cutting-Edge Applications

During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the use of these materials for target applications. Considering the number of publications and the rapid evolution of this flourishing field of research, this review aims at providing a broad overview of the most widely established synthetic protocols and offering a detailed review of some specific applications that are attracting researchers’ interest.

Synthesis of highly fluorescent and water soluble graphene quantum dots for detection of heavy metal ions in aqueous media

Fluorescent graphene quantum dots (GQDs) are nanomaterials which possess unique properties that show great potential in different applications. In this work, GQDs were synthesized using graphene oxide (GO) as precursor via thermal treatment at high temperature. The obtained GQDs were highly fluorescent and were suitable for the determination of heavy metal ions. X-ray diffraction, FTIR spectroscopy, and UV visible spectroscopy confirm the formation of GQDs. TEM images show that formed GQDs have size ranging from 2 to 10 nm. Emission profile of aqueous GQDs was taken by exciting GQDs at different wavelength. The intensity of GQDs remains the same for 4-5 months. Furthermore, as prepared, GQDs were used for selective recognition of Fe³⁺, Pb⁺², and Cr³⁺ from the bunch of different metal ions in aqueous media. Lower limit of detection obtained for Fe³⁺, Cr³⁺ and Pb²⁺ using GQDs were 50, 100 and 100 nM, respectively, which indicates that the GQDs can be utilized as a promising material for sensing of the heavy metal ions. Graphical abstract.

Top-Down N-Doped Carbon Quantum Dots for Multiple Purposes: Heavy Metal Detection and Intracellular Fluorescence

In the present study, we successfully synthesized N-doped carbon quantum dots (N-CQDs) using a top-down approach, i.e., hydroxyl radical opening of fullerene with hydrogen peroxide, in basic ambient using ammonia for two different reaction times. The ensuing characterization via dynamic light scattering, SEM, and IR spectroscopy revealed a size control that was dependent on the reaction time, as well as a more pronounced -NH2 functionalization. The N-CQDs were probed for metal ion detection in aqueous solutions and during bioimaging and displayed a Cr3+ and Cu2+ selectivity shift at a higher degree of -NH2 functionalization, as well as HEK-293 cell nuclei marking.

Detonation nanodiamonds-phthalocyanine photosensitizers with enhanced photophysicochemical properties and effective photoantibacterial activity

The nanophotosensitizers based on acetophenoxy tetrasubstituted metallophthalocyanines (MPc) and detonation nanodiamonds (DNDs) were successfully formed and their photophysicochemical properties were determined. The zinc(II)Pc and indium(III)Pc complexes along with their nanoconjugates were found to have high singlet oxygen quantum yields (0.72 - 0.84) associated with the heavy central metal effect. The ability of the functional groups present on the DNDs to bind to the bacteria cell and the improved solubility of the nanoconjugates due to DNDs resulted in effective photodynamic antimicrobial therapy (PACT) activity against S. aureus planktonic cells, with the highest log reduction of 9.72 ± 0.02 for the conjugate of InPc conjugate with DNDs after 30 min irradiation. PACT studies were investigated at a dose of 10 μg/mL for each sample. The results suggest that the readily synthesized nanoconjugates can be used as appropriate PACT agents.

A search for enhanced photodynamic activity against Staphylococcus aureus planktonic cells and biofilms: the evaluation of phthalocyanine-detonation nanodiamond-Ag nanoconjugates

The present work reports on the synthesis and characterization of novel zinc (2) and indium (3) 2-amino-4-bromophenoxy substituted phthalocyanines (Pcs) along with the self-assembled nanoconjugates formed viaπ-π stacking interaction onto detonation nanodiamonds (DNDs) to form 2@DNDs and 3@DNDs. 2@DNDs and 3@DNDs were covalently linked to chitosan-silver mediated nanoparticles (CSAg) to form 2@DNDs-CSAg and 3@DNDs-CSAg nanoconjugates. High singlet oxygen quantum yields in DMSO of 0.69 and 0.72 for Pcs alone and 0.90 and 0.92 for 2@DNDs-CSAg and 3@DNDs-CSAg, respectively, were obtained. The photodynamic antimicrobial chemotherapy (PACT) activity of both phthalocyanines and nanoconjugates was tested against planktonic cells and biofilms of S. aureus. 2@DNDs-CSAg and 3@DNDs-CSAg caused effective killing with a log reduction of 9.74. In addition, PACT studies on single-species S. aureus biofilms were carried out with log reduction values of 5.12 and 5.27 at 200 μg mL^-1 for 2@DNDs-CSAg and 3@DNDs-CSAg, respectively.

Recent Advancement in Bio-precursor derived graphene quantum dots: Synthesis, Characterization and Toxicological Perspective

Graphene quantum dots (GQDs), impressive materials with enormous future potential, are reviewed from their inception, including different precursors. Considering the increasing burden of industrial and ecological bio-waste, there is an urgency to develop techniques which will convert biowaste into active moieties of interest. Amongst the various materials explored, we selectively highlight the use of potential carbon containing bioprecursors (e.g. plant-based, amino acids, carbohydrates), and industrial waste and its conversion into GQDs with negligible use of chemicals. This review focuses on the effects of different processing parameters that affect the properties of GQDs, including the surface functionalization, paradigmatic characterization, toxicity and biocompatibility issues of bioprecursor derived GQDs. This review also examines current challenges and s the ongoing exploration of potential bioprecursors for ecofriendly GQD synthesis for future applications. This review sheds further light on the electronic and optical properties of GQDs along with the effects of doping on the same. This review may aid in future design approaches and applications of GQDs in the biomedical and materials design fields.

Facile and Efficient Fabrication of Bandgap Tunable Carbon Quantum Dots Derived From Anthracite and Their Photoluminescence Properties

Low-cost and earth-abundant coal has been considered to have a unique structural superiority as carbon sources of carbon quantum dots (CQDs). However, it is still difficult to obtain CQDs from raw coal due to its compactibility and lower reactivity, and the majority of the current coal-based CQDs usually emit green or blue fluorescence. Herein, a facile two-step oxidation approach (K₂FeO₄ pre-oxidation and H₂O₂ oxidation) was proposed to fabricate bandgap tunable CQDs from anthracite. The K₂FeO₄ pre-oxidation can not only weaken the non-bonding forces among coal molecules which cause the expansion of coal particles, but also form a large number of active sites on the surface of coal particles. The above effects make the bandgap tunable CQDs (blue, green, or yellow fluorescence) can be quickly obtained from anthracite within 1 h in the following H₂O₂ oxidation by simply adjusting the concentration of H₂O₂. All the as-prepared CQDs contain more than 30 at% oxygen, and the average diameters of which are <10 nm. The results also indicate that the high oxygen content only can create new energy states inside the band gap of CQDs with average diameter more than 3.2 ± 0.9 nm, which make the as-prepared CQDs emit green or yellow fluorescence.

Charcoal derived graphene quantum dots for flexible supercapacitor oriented applications

In this article, charcoal is used as a new raw material for the synthesis of high yield graphene quantum dots (GQDs) for supercapacitor application.

Regulating the properties of carbon dots via a solvent-involved molecule fusion strategy for improved sensing selectivity

Carbon dots (CDs) were prepared by a solvent-involved molecular fusion strategy using o-phenylenediamine (OPD) as the carbon source and formamide as the reaction solvent. The CDs possessed not only the functional groups inherited from the carbon source and the reaction solvent, but also numerous C=N groups in the structure, resulting from the Schiff base reaction between -NH₂ of OPD and C=O of formamide. These functional groups endowed the final CDs with a favorable soft-base property, leading to the high tolerance level toward hard-acid type metal ions and prominent detection selectivity toward Ag⁺. Moreover, the obtained CDs displayed outstanding biocompatibility and low cytotoxicity, and demonstrated potential as an effective photoluminescence probe for intercellular Ag⁺ and Cys imaging, preventing the interference of autofluorescence from living tissues. This study focused on the solvent-involved molecular fusion strategy could provide new insights into the design of novel carbon-based nanostructures and optimization of the structure-property relationship of CDs.

Predicting the Time of Entry of Nanoparticles in Lipid Membranes

The number of engineered nanoparticles for applications in the biomedical arena has grown tremendously over the last years due to advances in the science of synthesis and characterization. For most applications, the crucial step is the transport through a physiological cellular membrane. However, the behavior of nanoparticles in a biological matrix is a very complex problem that depends not only on the type of nanoparticle but also on its size, shape, phase, surface charge, chemical composition, and agglomeration state. In this paper, we introduce a streamlined theoretical model that predicts the average time of entry of nanoparticles in lipid membranes, using a combination of molecular dynamics simulations and statistical approaches. The model identifies four parameters that separate the contributions of nanoparticle characteristics (i.e., size, shape, solubility) from the membrane properties (density distribution). This factorization allows the inclusion of data obtained from both experimental and computational sources, as well as a rapid estimation of large sets of permutations in membranes. The robustness of the model is supported by experimental data carried out in lipid vesicles encapsulating graphene quantum dots as nanoparticles. Given the high level of interest across multiple areas of study in modulating intracellular targets, and the need to understand and improve the applications of nanoparticles and to assess their effect on human health (i.e., cytotoxicity, bioavailability), this work contributes to the understanding and prediction of interactions between nanoparticles and lipid membranes.

One-Step Green Hydrothermal Synthesis of Few-Layer Graphene Oxide from Humic Acid

The conventional synthesis route of graphene oxide (GO^G), based on Hummers method, suffers from explosion risk, environmental concerns and a tedious synthesis process, which increases production costs and hinders its practical applications. Herein, we report a novel strategy for preparing few-layer graphene oxide (GO^H) from humic acid via simple hydrothermal treatment. The formation of GO^H is mainly attributed to the hydrolysis, oxidation and aromatization of humic acid under hydrothermal conditions. The as-prepared few-layer GO^H has typical morphology (thin and crumpled sheets with the thickness of ~3.2 nm), crystal structure (a Raman I_D/I_G ratio of 1.09) and chemical composition (an X-ray Photoelectron Spectroscopy (XPS) O/C atomic ratio of 0.36) of few-layer GO^G. The thermally reduced GO^H (r-GO^H) delivers considerable area capacitance of 28 µF·cm⁻², high rate capability and low electrochemical resistance as supercapacitor electrodes. The described hydrothermal process shows great promise for the cheap, green and efficient synthesis of few-layer graphene oxide for advanced applications.

Graphene quantum dot based "switch-on" nanosensors for intracellular cytokine monitoring

The detection of cytokines in body fluids, cells, tissues and organisms continues to attract considerable attention due to the importance of these key cell signalling molecules in biology and medicine. We report a graphene quantum dot (GQD) based aptasensor able to specifically detect ultra-small amounts of cytokine molecules intracellularly. Graphene quantum dots modified with cytokine aptamers (Ap-GQDs) and epitope modified GQDs (Ep-GQDs) were prepared; both are normally fluorescent at sufficient dilution. However, the fluorescence of the conjugates of Ap-GQDs and Ep-GQDs is quenched due to aggregation between Ap-GQDs and Ep-GQDs. After incubation of the cytokine-secreting cells with the conjugates of Ap-GQDs and Ep-GQDs, the cytokines secreted in cells compete for binding with the epitope which is then displaced. The ensuing binding of cytokines with the aptamers results in the disaggregation of Ap-GQDs and Ep-GQDs, and the recovery of fluorescence. The conjugates of Ap-GQDs and Ep-GQDs were used as nanosensors for monitoring intracellular cytokine IFN-γ secretion with very high sensitivity (2 pg mL^-1). The disaggregation based sensing strategy in this nanosensor design is simple and universal; similar nanosensors can be used for the detection of a broad spectrum of cell-secreted molecules. Such nanosensors will serve as potential biomaterials for in vivo devices to monitor a variety of biological phenomena, in particular to understand cytokine secretion pathways in live cells.

Two Silver Coordination Network Compounds with Colorful Photoluminescence

The excitation-wavelength-dependent photoluminescence (EWDP) property of flexible organic ligand 1,4-bis(2-methyl-imidazol-1-yl)butane (Bmib) was observed. Herein, Bmib was chosen as a bridge linker to react with AgX (X = Br and I) to synthesize novel coordination network compounds (CNCs) with interesting EWDP properties. As anticipated, under the same hydrothermal synthesis conditions, two new isomorphic CNCs, i.e. [Ag2(Bmib)Br2]∞ (IAM16-1) and [Ag2(Bmib)I2]∞ (IAM16-2), as the first examples of CNCs showing EWDP properties, have been obtained. The EWDP properties may be attributed to the stretch and rotation of the long -(CH2)4- chains of Bmib and the spatial orientation adjustment of the methyl group of each imidazole ring at different excitation wavelengths. It is a great challenge to point out the emission mechanisms of CNCs merely from the experimental results due to their multiple charge transfer routes. To address this issue, we adopt DFT calculations to pursue in-depth investigation of the emission mechanisms for IAM16-1 and IAM16-2, respectively.

Graphene quantum dots: recent progress in preparation and fluorescence sensing applications

This paper reviews recent activities in the preparation and fluorescence sensing applications of graphene quantum dots.

Effects of optical and magnetic fields on the electrical characteristics of colloidal graphene quantum dots

The effects of optical, magnetic fields and microwave heating time (MHT) have a pronounced influence on the electrical performance of graphene quantum dots (GQDs).