Enhanced fluorescent detection of oxaliplatin via BSA@copper nanoclusters: a targeted approach for cancer drug monitoring

A new fluorescence sensing approach has been proposed for the precise determination of the anti-cancer drug oxaliplatin (Oxal-Pt). This method entails synthesizing blue-emitting copper nanoclusters (CuNCs) functionalized with bovine serum albumin (BSA) as the stabilizing agent. Upon excitation at 360 nm, the resultant probe exhibits emission at 460 nm. Notably, the fluorescence response of BSA@CuNCs substantially increases upon incubation with Oxal-Pt due to multiple binding interactions between the drug and the fluorescent probe. These interactions involve hydrogen bonding, hydrophobic interaction, and the high affinity between the SH groups (cysteine residues of BSA) and platinum (in Oxal-Pt). Consequently, this interaction induces aggregation-induced emission enhancement (AIEE) of BSA@CuNCs. The probe demonstrates a broad response range from 0.08 to 140.0 μM, along with a low detection limit of 20.0 nM, determined based on a signal-to-noise ratio of 3. Furthermore, the probe effectively detects Oxal-Pt in injections, human serum, and urine samples, yielding acceptable results. This study represents a significant advancement in the development of a straightforward and efficient sensor for monitoring platinum-containing anti-cancer drugs during chemotherapy.

One-pot preparation of supramolecularly functionalized silver nanoparticles for surface plasmon resonance based dual-modal sensing of phytotoxic polychlorinated biphenyl

Polychlorinated biphenyls (PCBs), as a member of persistent organic pollutants (POPs), have posed a risk to humans and the environment until today. The monitoring of phytotoxic PCB which is toxic to plants, is especially important for ecological early warning and pollution management. In this work, β-cyclodextrin modified silver nanoparticles are prepared in a one-pot method, integrating the synthesis and surface modification in one step. The nanoparticles can supramolecularly immobilize 2,4,4'-trichlorobiphenyl (PCB 28) on their surface and construct a surface plasmon resonance-based nanosensor. Surface plasmon-resonance light scattering and surface-enhanced Raman scattering sensing of PCB 28 are realized using the nanosensor. The dual-modal sensing shows excellent performance for the potential practical monitoring of phytotoxic POPs in the plant and its growing environment.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Preparation of blue fluorescent copper nanoclusters for sensitive and selective sensing of apigenin in pharmaceutical samples

One-pot means was performed for the rapid preparation of copper nanoclusters (Cu NCs), which were employed as a fluorescence system for the sensitive apigenin measurement in pharmaceutical samples. Herein, CuCl₂ aqueous solution was reduced to Cu NCs through ascorbic acid and the Cu NCs were protected through trypsin under 65 ℃ for 4 h. The entire preparation process was rapid, facile and environmentally friendly. The trypsin-capped Cu NCs were demonstrated through ultraviolet-visible spectroscopy, fluorescence spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and fluorescence lifetime, respectively. The Cu NCs revealed blue fluorescence with emission wavelength around 465 nm under the excitation wavelength of 380 nm. The fluorescence weakening feature of Cu NCs with apigenin was observed. On this basis, a facile and sensitive turn-off fluorescent nanoprobe for the sensing of apigenin in real samples was developed. The logarithm of relative fluorescence intensity revealed a good linear relationship with apigenin contents from 0.5 μM to 300 μM with the detection limit of 0.079 μM. The Cu NCs-based fluorescent nanosensor have been employed to measure the apigenin amounts in real samples such as medical saline, bovine and human serum. The results revealed excellent potential of this Cu NCs-based fluorescent nanoprobe for the convention computation of apigenin amounts in real samples.

Visual Detection and Sensing of Mercury Ions and Glutathione Using Fluorescent Copper Nanoclusters

Visual detection of mercury ions and glutathione is of great significance to public health and environmental issues. Herein, we developed a fluorescent sensor (l-Cys/CuNCs@ESM) based on the eggshell membrane (ESM) and red-emitting copper nanoclusters (CuNCs) by the in situ strategy via l-cysteine (l-Cys) as the reducing and protective agent for mercury ions and glutathione sensing visually. The as-prepared fluorescent product had good stability, portability, large Stokes shift (250 nm), and long fluorescence lifetime (7.3 μs). Notably, the l-Cys/CuNCs@ESM exhibited a specific fluorescence quenching response toward Hg²⁺. Moreover, the interaction between glutathione (GSH) and Hg²⁺ could subsequently recover the fluorescence effectively. Inspired by this "on-off-on" switch, the l-Cys/CuNCs@ESM was applied as the dual-sensing system for visual detection of mercury ions and glutathione integrating with the portable smartphone. The limit of detection (LOD) of Hg²⁺ is 1.1 μM for visualization and 0.52 μM for the fluorescence spectrometer. The corresponding LODs of GSH are 2.8 and 0.59 μM, respectively. This platform presents significant sensitivity, specificity, and stability, offering a promising potential for real-time/on-site sensing.

Designing of robust and sensitive assay via encapsulation of highly emissive and stable blue copper nanocluster into zeolitic imidazole framework (ZIF-8) with quantitative detection of tetracycline

Metal–organic frameworks (MOFs) with high stability and porosity have gained great attention in bioanalysis due to their potential in improving sensitivity and robustness of assays. Herein, to improve both the stability and the emission intensity of Cu nanoclusters (CuNCs), in situ entrapment strategy of CuNCs into zeolitic imidazolate framework-8 (ZIF-8) is described. Blue emissive and stable CuNCs was prepared, for the first time, using thiamine hydrochloride as capping agents, and showed strong and stable emission at 440 nm when excited at 375 nm with fluorescence quantum yields 12%. Encapsulation of CuNC into ZIF-8 showed dramatic enhancement of the fluorescence intensity up to 53% fluorescence quantum yield. Furthermore, the CuNCs@ZIF-8 possesses better stability (more than three months) due to protective and confinement effect of MOFs. Upon the addition of tetracycline to CuNCs@ZIF-8 solution, the blue emission intensity was significantly decreased. The fluorescence ratio (Fo/F) against the concentration of tetracycline exhibited a satisfactory linear relationship from 1.0 to 10.0 µM with a detection limit (LOD) of 0.30 µM. The current probe was applied for quantification of tetracycline in drug sample with satisfactory accuracy and precision.

Graphical abstract

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

Synthesis of Copper Nanocluster and Its Application in Pollutant Analysis

Copper nanoclusters (Cu NCs) with their inherent optical and chemical advantages have gained increasing attention as a kind of novel material that possesses great potential, primarily in the use of contaminants sensing and bio-imaging. With a focus on environmental safety, this article comprehensively reviews the recent advances of Cu NCs in the application of various contaminants, including pesticide residues, heavy metal ions, sulfide ions and nitroaromatics. The common preparation methods and sensing mechanisms are summarized. The typical high-quality sensing probes based on Cu NCs towards various target contaminants are presented; additionally, the challenges and future perspectives in the development and application of Cu NCs in monitoring and analyzing environmental pollutants are discussed.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Biodegradation of malachite green by a novel laccase-mimicking multicopper BSA-Cu complex: Performance optimization, intermediates identification and artificial neural network modeling

In this work, a soluble biopolymer was prepared by conjugating the bovine serum albumin (BSA) with transition metal ion (Cu²⁺). BSA-Cu complex was synthesized and characterized using UV-vis absorption, fluorescence and ATR-FTIR spectroscopies. A colorimetric guaiacol oxidation based method, was used to study the catalytic activity of complex and the results indicated its laccase-like activity. Compared with laccase, BSA-Cu complex showed a higher K_m value and a similar V_max value at the same mass concentration. Also, the ability of the BSA-Cu complex to decolorize malachite green (MG) was tested and the results showed that the complex was able to complete the decolorization process of MG within 30 min. Using gas chromatography/mass spectrometry (GC-MS) the resultant metabolites of MG degradation were analyzed and the toxicity of degradation products was assessed against Escherichia coli and Bacillus subtilis. The results confirmed the formation of less toxic products after degradation of MG by BSA-Cu complex. To predict the decolorization efficiency (DE%) of MG, an artificial neural network (ANN) was designed with five, five and one neurons in the input, hidden and output layers, respectively. The obtained results showed the ability of the designed ANN to predict MG removal successfully.

Novel synthesis of orange-red emitting copper nanoclusters stabilized by methionine as a fluorescent probe for norfloxacin sensing

In the present work, we report a novel chemical approach for the synthesis of orange-red emitting copper nanoclusters (Cu NCs) using L-methionine as stabilizing agent at room temperature for the first time. The synthetic route is facile, economical and viable. The methionine stabilized copper nanoclusters (Cu NCs/Met) were thoroughly characterized by TEM, FT-IR, XPS, UV-Vis, steady state and transient fluorescence spectroscopy. The results show the synthesized Cu NCs/Met with a fluorescence quantum yield of 4.37% possessed high stability and excellent optical features such as large Stokes shift and long fluorescence lifetime (8.3 μs). Significantly, the fluorescence intensity of Cu NCs/Met could be efficiently quenched by norfloxacin (NOR) pharmaceutical. A fast and cost-effective NOR sensor was proposed employing Cu NCs/Met as the fluorescent nanoprobe, and the quenching mechanisms were attributed to inner filter effect and agglomeration-induced quenching. The developed sensor exhibited a high sensitivity and selectivity towards NOR in a wide linear range from 0.05 to 250 μM with a detection limit as low as 17 nM. Moreover, the practicability of the developed NOR sensor for real sample assay was validated with satisfactory recoveries, indicating this sensing platform with great potential for label-free pharmaceutical detection in complex systems.

Developing fluorescent copper nanoclusters: Synthesis, properties, and applications

Metal nanoclusters exhibit strong fluorescence emission, providing immense potential for developments in biological labeling and imaging. Copper nanoclusters in particular, due to their unique optical properties such as molecular-like absorption and strong luminescence, represent a novel fluorescent nanomaterial for sensing and bioimaging applications. This review describes research progress on Cu nanoclusters in recent years, investigating the synthesis techniques, their properties, and their promising applications. A concluding summary provides an outlook on the future research challenges for Cu nanoclusters and their corresponding synthesis techniques.

Recent progress in copper nanocluster-based fluorescent probing: a review

Copper nanoclusters (CuNCs) are an attractive alternative to other metal nanoclusters. The synthesis of CuNCs is highly efficient and fast, with low-cost and without any complicated manipulation. Because of their tunable fluorescence and low toxicity, CuNCs have been highly exploited for biochemical sensing. This review (with 172 refs.) summarizes the progress that has been made in the field in the past years. Following an introduction into the fundamentals of CuNCs, the review first focuses on synthetic methods and the fluorescence properties of CuNCs (with subsections on the use of proteins, peptides, DNA and other molecules as templates). This is followed by a section on the use of CuNCs in fluorometric assays, with subsections on the detection of small molecules, proteins, nucleic acids, various other biomolecules including drugs, and of pH values. A further large chapter summarizes the work related to environmental analyses, specifically on determination of metal ions, anions and pollutants. Graphical abstract Schematic representation of the synthesis and potential applications of copper nanocluster (CuNCs) in biochemical analysis, emphatically reflected in some vital areas such as small molecule analysis, biomacromolecule monitoring, cell imaging, ions detection, toxic pollutant, etc.

Green synthesis of a plant-derived protein protected copper quantum cluster for intrauterine device application

Fluorescent copper quantum clusters (CuQCs) have received great interest in recent times due to their attractive features, such as water solubility, low cost, wide availability of Cu and good biocompatibility. Recently, considerable efforts have been devoted to the preparation and applications of CuQCs. Herein, we report a simple one-pot green method for the preparation of fluorescent CuQCs using a plant-derived protein, gluten, as a stabilizing agent. Gluten, a naturally abundant, low-cost and sustainable plant-protein derived from wheat, was employed both as a reducing and stabilizing agent to produce blue emitting CuQCs. The CuQCs were characterized by UV-Vis absorption, fluorescence, FT-IR, TEM, and XPS. We further incorporated CuQCs into a polymer to study the release rate of Cu2+ ions from a CuQC-polymer composite, since copper ions are well known for their fungicidal properties and contraceptive action in copper-T (CuT). The CuQCs were incorporated into a model polymer, polyurethane (PU), by melt compounding, and the mixtures were extruded in the form of a wire. It was observed that the CuQCs were uniformly dispersed within the polymer matrix. An in vitro experiment was carried out to quantify the potential release of Cu(ii) ions for contraceptive applications. The developed nanocomposite releases Cu(ii) ions for 90 days, which suggests the potential application of the CuQCs in the medical field like the development of short-term intrauterine devices (IUDs). Compared to conventional IUDs, here the CuQC-PU nanocomposite reduces the burst release of the Cu2+, and the release rates can be tuned by changing the composition of the materials. These results suggest that the CuQC-PU nanocomposites have great potential to replace current commercial intrauterine devices.

Bimetallic AuCu nanoclusters-based florescent chemosensor for sensitive detection of Fe3+ in environmental and biological systems

Assays of ferric ion (Fe³⁺) with high sensitivity and selectivity have been required to evaluate its amount in environmental and biological systems. Herein, a novel fluorometric penicillamine-capped bimetallic gold-copper nanoclusters (PA-AuCu bi-MNCs) sensor was constructed for facile, environmentally friendly and quantitative detection of Fe³⁺ through inner filter effect (IFE) mechanism. One-step green synthetic approach was applied for the synthesis of AuCu bi-MNCs by using d-penicillamine (D-PA) as template and stabilizer. In the presence of Fe³⁺, the emission of the PA-AuCu bi-MNCs was hindered that caused selective quenching of the fluorescence intensity. The response to Fe³⁺ allows for two linear dynamic ranges of 5.0 × 10^-7 M-7.0 × 10^-6 M and 7.0 × 10^-6 M-1.0 × 10^-4 M with a detection limit of 0.1 μM, which is approximately 53 times lower than the maximum level (5.37 μM) of Fe³⁺ in drinking water that had been reported by the World Health Organization. The independency of the system from most of the interferences is the important feature of this work. Beside the appropriate selectivity of the proposed method, it shows a considerable operation in various environmental samples including rain water, three types of river water and also in human blood serum as a biological matrix.

Fluorescence-tunable copper nanoclusters and their application in hexavalent chromium sensing

Generally, metal nanoclusters are synthesized using only a single ligand. Thus, the properties and applications of these nanomaterials are limited by the nature of the ligand used. In this study, we have developed a new synthetic strategy to prepare bi-ligand copper nanoclusters (Cu NCs). These bi-ligand Cu NCs are synthesized from copper ions, thiosalicylic acid, and cysteamine by a simple one-pot method, and they exhibit high quantum yields (>18.9%) and good photostability. Most interestingly, the fluorescence intensities and surface properties of the Cu NCs can be tailored by changing the ratio of the two ligands. Consequently, the bi-ligand Cu NCs show great promise as fluorescent probes. Accordingly, the Cu NCs were applied to the inner-filter-effect-based detection of hexavalent chromium in water. A wide linear range of 0.1–1000 μM and a low detection limit (signal-to-noise ratio = 3) of 0.03 μM was obtained. The recoveries for the real sample analysis were between 98.3 and 105.0% and the relative standard deviations were below 4.54%, demonstrating the repeatability and practical utility of this assay.

Generally, metal nanoclusters are synthesized using only a single ligand.

Highly Sensitive and Selective Fluorescent Detection of Gossypol Based on BSA-Stabilized Copper Nanoclusters

In this paper, fluorescent copper nanoclusters (NCs) are used as a novel probe for the sensitive detection of gossypol for the first time. Based on a fluorescence quenching mechanism induced by interactions between bovine serum albumin (BSA) and gossypol, fluorescent BSA-Cu NCs were seen to exhibit a high sensitivity to gossypol in the range of 0.1–100 µM. The detection limit for gossypol is 25 nM at a signal-to-noise ratio of three, which is approximately 35 times lower than the acceptable limit (0.9 µM) defined by the US Food and Drug Administration for cottonseed products. Moreover, the proposed method for gossypol displays excellent selectivity over many common interfering species. We also demonstrate the application of the present method to the measurement of several real samples with satisfactory recoveries, and the results agree well with those obtained using the high-performance liquid chromatography (HPLC) method. The method based on Cu NCs offers the followings advantages: simplicity of design, facile preparation of nanomaterials, and low experimental cost.

Size-controlled atomically precise copper nanoclusters: Synthetic protocols, spectroscopic properties and applications

Noble metal nanoclusters (NCs) are a new class of nanomaterials which are considered being a missing link between isolated metal atoms and metal nanoparticles (NPs). The sizes of the NCs are comparable to the Fermi wavelength of the conduction electrons, and this renders them to be luminescent in nature. They exhibit size-dependent fluorescence properties spanning almost the entire breath of the visible spectrum. Among all the noble metal NCs being explored, copper NCs (CuNCs) are the most rarely investigated primarily because of their propensity of getting oxidised. In this chapter, we have given a comprehensive understanding as to why these NCs are luminescent in nature. We have also given a detailed overview regarding the various templates used for the synthesis of these CuNCs along with the respective protocols being followed. The various instrumental techniques used to characterize these CuNCs are discussed which provides an in-depth understanding as to how these CuNCs can be properly examined. Finally, we have highlighted some of the most recent applications of these CuNCs which make them unique to serve as the next-generation fluorophores.

Graphical Abstract:

In Situ Generation of Fluorescent Copper Nanoclusters Embedded in Monolithic Eggshell Membrane: Properties and Applications

Luminescent metal nanoclusters have attracted considerable research attention in recent years due to their unique properties and extensive usage in many fields. Three different synthetic routes were developed to in situ generate orange and red emitting copper nanoclusters embedded in monolithic eggshell membrane (Cu NCs@ESM) using different reducing reagents including N₂H₄·H₂O, NH₂OH·HCl and Vitamin C at room temperature for the first time. The routes are extremely facile, low-cost and versatile. The obtained Cu NCs@ESM nanocomposites exhibit excellent photostability and chemical stability, laying the foundation for various practical applications. Fluorescent surface patterning was demonstrated based on the proposed strategy easily. Significantly, the Cu NCs@ESM shows selective fluorescence quenching response to Hg2+ ions and good catalytic activity for methylene blue (MB) reduction degradation making it ideal as portable sensing strip and recyclable catalyst. The work provides a general strategy for the fabrication of other various monolithic nanomaterials with potential applications.

Fast synthesis of porous copper nanoclusters for fluorescence detection of iron ions in water samples

Copper nanoclusters (Cu NCs) have attracted great research interest in recent years owing to its unique physical, electrical and optical properties. Macromolecules have been widely used as templates to synthesize fluorescent Cu NCs. In this study, a simple method for synthesis of albumin chicken egg capped porous copper nanoclusters (p-Cu NCs) was developed for the first time. The obtained p-Cu NCs exhibited intense emission and excitation peaks at 280 nm and 340 nm, respectively. Besides, the p-Cu NCs fluorescence probe could be quenched by Fe³⁺ ions in aqueous solutions. Therefore, the p-Cu NCs can be excellently candidated as fluorescent probe for the detection of Fe³⁺ ions. Under optimized conditions, this fluorescent probe exhibited a wide linear response concentration range (0.2 to 100 μM) to Fe³⁺ with a detection limit of 0.0234 μM. In addition, the fluorescent probe has been successfully used for the detection of Fe³⁺ in natural water samples with satisfactory result.

Copper nanoclusters as fluorescence-quenching probes for the quantitative analysis of total iodine

Tannic acid-coated copper nanoclusters (CuNCs@TA) were synthesized and used quantitatively to analyze iodine in kelp. Compared with other methods for iodine detection, the proposed method showed excellent performance. The iodine-induced linear decrease in the fluorescence intensity of CuNCs@TA allowed the quantitative detection of iodine in the range 20-100 μM, and the limit of detection for iodine was 18 nM. The probe can be used for the determination of iodine in real samples with reliable and accurate results. Modified Stern-Volmer equation and thermodynamic calculation studies were used to discuss the quenching mechanism.

Blue emitting copper nanoclusters as colorimetric and fluorescent probe for the selective detection of bilirubin

Hurdles to develop point of care diagnostic methods restrict the translation of progress in the health care sector from bench side to bedside. In this article a simple, cost effective fluorescent as well as colorimetric nanosensor was developed for the early and easy detection of hyperbilirubinemia. A stable, water soluble bovine serum albumin stabilised copper nanocluster (BSA CuNC) was used as the fluorescent probe which exhibited strong blue emission (404nm) upon 330nm excitation. The fluorescence of the BSA CuNC can be effectively quenched by the addition of bilirubin by the formation of copper-bilirubin complex. Meanwhile the copper-bilirubin complex resulted in an observable colour change from pale violet to green facilitating colorimetric detection. The prepared sensor displayed good selectivity and sensitivity over other co-existing molecules, and can be used for quantifying bilirubin with a detection limit down to 257fM. Additionally, the as-prepared probe was coated on a paper strip to develop a portable paper strip sensor of bilirubin. Moreover, the method was successfully applied in real sample analysis and obtained promising result.

Synthesis, optical properties and applications of light-emitting copper nanoclusters

Metal nanoclusters (NCs) containing a few to a few hundreds of atoms bridge the gap between nanoparticles and molecular compounds. The last decade evidenced impressive developments of noble metal NCs such as Au and Ag. Copper is an earth abundant, inexpensive metal from the same group of the periodic table, which is increasingly coming into focus for NC research. This review specifically addresses wet chemical synthesis methods, optical properties and some emerging applications of Cu NCs. As surface protecting templates/ligands play an important role in the stability and properties of Cu NCs, we classified the synthetic methods by the nature of the capping agents. The optical properties of Cu NCs are discussed from the point of view of the effects of the metal core, surface ligands and environment (solvents and aggregation) on the emission of the clusters. Applications of luminescent Cu NCs in biological imaging and light emitting devices are considered.

Fabrication of valine-functionalized graphene quantum dots and its use as a novel optical probe for sensitive and selective detection of Hg2

The functionalization of graphene quantum dots has become a powerful method to modulate its chemical, electronic and optical properties for various applications. In the study, we reported a facile synthesis of valine-functionalized graphene quantum dots (Val-GQDs) and its use as a novel fluorescent probe for optical detection of Hg²⁺. Herein, Val-GQDs was synthesized by the thermal pyrolysis of citric acid and valine. The resulting Val-GQDs has an average size of 3nm and the edge of graphene sheets contains the rich of hydrophilic groups, leading to a high water-solubility. Compared to the GQDs prepared by thermal pyrolysis of citric acid, Val-GQDs exhibits a stronger fluorescence (>10-fold) and better photostability (>4-fold). Interestingly, the existence of valine moieties in the Val-GQDs results in a more sensitive fluorescent response to Hg²⁺. The fluorescent signal will linearly decrease with the increase of Hg²⁺ concentration in the range from 0.8nM to 1μM with the correlation coefficient of 0.992. The detection limit is 0.4nM (S/N=3), which the sensitivity is >14-fold that of GQDs. The analytical method provides the prominent advantage of sensitivity, selectivity and stability. It has been successfully applied in the optical detection of Hg²⁺ in real water samples. The study also provides a promising approach for the design and synthesis of functionalized GQDs to meet the needs of further applications in sensing and catalysis.

Synthesis and properties enhancement of metal nanoclusters templated on a biological molecule/ionic liquids complex

Two biological template molecules and two short-chain imidazolium ionic liquids with amphipathy were selected to synthesize four different types of metal nanoclusters, which were templated on a biological molecule/imidazolium ionic liquids complex.

Fluorescent copper nanoparticles: recent advances in synthesis and applications for sensing metal ions

Fluorescent copper nanoparticles (F-CuNPs) have received great attention due to their attractive features, such as water solubility, wide availability, ease of functionalization and good biocompatibility, and considerable efforts have been devoted to the preparation and applications of F-CuNPs. This review article comprises three main parts. In the first part, we briefly present the fluorescence properties of F-CuNPs. Then we cover the fabrication strategies of various F-CuNPs functionalized by different ligands. In the third part, we focus on the applications of F-CuNPs for sensing metal ions, including Hg(2+), Pb(2+), Cu(2+), Fe(3+) and other metal ions. Lastly, we further discuss the opportunities and challenges of F-CuNPs in the synthetic strategies and applications for sensing metal ions.

d-Penicillamine and bovine serum albumin co-stabilized copper nanoclusters with remarkably enhanced fluorescence intensity and photostability for ultrasensitive detection of Ag+

This study reports the synthesis of d-penicillamine and bovine serum albumin co-stabilized copper nanoclusters. The nanoclusters show high fluorescence intensity, stability and response towards silver ion.

A new application of the traditional Fenton process to gold cyanide synthesis using acetonitrile as a cyanide source

We introduced a general Fenton-reaction synthesis of metal cyanide solids using acetonitrile as a green cyanide source. This Fenton-improved cyanation method gets rid of CN⁻ ions and UV-light efficiently, which is green and facile.