Silkworm-derived carbon nano rods (swCNR) for detection of bismuth ions (Bi3+) in aquatic medium and their antiradical properties

The extensive utilization of bismuth and its derivatives in many industries, such as chemical, semiconductor, pharmaceutical, and cosmetics, leads to their accumulation in wastewater, posing a risk to both human health and the environment. Carbon nanorods (CNR) are fluorescent nanoparticles with an ability to detect various analytes as sensing probes. This study focuses on the production, structure, and chemical composition characterization of silkworm-derived CNR (swCNR) and their ability to detect bismuth ions (Bi3+) and inhibit radicals. The optimum wavelength for exciting the fluorescence of swCNR was 370 nm, and the resulting emission peak was observed at 436 nm. The prepared swCNR showed static fluorescence quenching mechanism-based sensing of Bi3+ ions with a limit of detection of 175 nM and two linear ranges from 0.5 to 5 μM (R2 = 0.9997) and 10-50 μM (R2 = 0.9995). The swCNR demonstrated high selectivity in detecting Bi3+ ions in the spiked river water samples, thus establishing the swCNR's role as a nano fluorescence probe designed for the selective detection of Bi3+ ions among other metal ions. Favorable results for the antiradical ability of swCNR were obtained against hydroxyl, 2,2 diphenyl-1 picrylhydrazyl, and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radicals with scavenging percentages of 15, 32, and 90, respectively. The possible applications of swCNR in the environmental and antioxidant sectors are proposed in this study.

Sustainable carbon nano-onions as an adsorbent for the efficient removal of oxo-anions

The increasing threats of oxo-anions in drinking water have posed a serious threat to human health, aquatic environment, ecology, and sustainability. Accordingly, developments of cost-effective and sustainable nanomaterials for water remediation are on top priority and highly sought in global research community. Carbon nano-onions (CNOs) are one of the emerging nanomaterials for water purification because of its unique morphology, surface reactivity, high density of surface-active sites, and microporous structure. Herein, flaxseed oil-derived CNOs are utilized as efficient adsorbent for the removal of toxic oxo-anions. Aside from the green and economic nature, CNOs provide high adsorption efficiency ~ 806.45 mg g^-1 for the removal of [Formula: see text] (99.9%) from aqueous system at ambient temperature, neutral pH in 70 min. The adsorption of [Formula: see text] onto CNOs was well fitted in pseudo-second order kinetics and followed the Langmuir adsorption isotherm model. The adsorption process was determined to be exothermic and spontaneous from the resulting thermodynamic characteristics. Furthermore, the high hydrophobic nature of CNOs make it recycling simpler. The real-life applicability of CNOs towards [Formula: see text] removal was tested in tap water, river water, and dam water. With all these observed results, CNOs show promise for practical water remediation applications.

Life Cycle Assessment-Based Comparative Study between High-Yield and "Standard" Bottom-Up Procedures for the Fabrication of Carbon Dots

Carbon dots (CDs) are carbon-based nanomaterials with remarkable properties that can be produced from a wide variety of synthesis routes. Given that "standard" bottom-up procedures are typically associated with low synthesis yields, different authors have been trying to devise alternative high-yield fabrication strategies. However, there is a doubt if sustainability-wise, the latter should be really preferred to the former. Herein, we employed a Life Cycle Assessment (LCA) approach to compare and understand the environmental impacts of high-yield and "standard" bottom-up strategies, by applying different life cycle impact assessment (LCIA) methods. These routes were: (1) production of hydrochar, via the hydrothermal treatment of carbon precursors, and its alkaline peroxide treatment into high-yield CDs; (2) microwave treatment of carbon precursors doped with ethylenediamine; (3) and (6) thermal treatment of carbon precursor and urea; (4) hydrothermal treatment of carbon precursor and urea; (5) microwave treatment of carbon precursor and urea. For this LCA, four LCIA methods were used: ReCiPe, Greenhouse Gas Protocol, AWARE, and USEtox. Results identified CD-5 as the most sustainable synthesis in ReCiPe, Greenhouse Gas Protocol, and USEtox. On the other hand, in AWARE, the most sustainable synthesis was CD-1. It was possible to conclude that, in general, high-yield synthesis (CD-1) was not more sustainable than "standard" bottom-up synthesis, such as CD-5 and CD-6 (also with relatively high-yield). More importantly, high-yield synthesis (CD-1) did not generate much lower environmental impacts than "standard" approaches with low yields, which indicates that higher yields come with relevant environmental costs.

N-Doped Carbon Nanorods from Biomass as a Potential Antidiabetic Nanomedicine

Insufficient glucose control remains a critical challenge for type 2 diabetes mellitus (T2DM) patients with currently used therapeutic drugs, which can also have detrimental side effects. The facile synthesis of nitrogen-doped carbon nanorods (N-CNRs) as therapeutic agents in a T2DM transgenic db/db mouse model is reported herein. N-CNRs are synthesized from silkworm powder without the assistance of any template and possess a hollow graphitic nature, rough surface, and good aqueous solubility, which make them ideal candidates for fabricating nanomedicines. N-CNRs are employed to reduce fasting blood glucose and ameliorate serum biomarker levels linked to oxidative stress and inflammation. Interestingly, through the downregulation of enhanced expression of glutathione peroxidase, superoxide dismutase, and catalase as well as inflammatory responses, N-CNRs reverse pancreatic dysfunction and normalize the secretory functions of pancreatic cells. Moreover, hepatic steatosis is attenuated by downregulating lipogenesis and increasing fatty acid oxidation. This finding may help in designing novel therapeutics for T2DM treatment.

Electrically Switchable Anisometric Carbon Quantum Dots Exhibiting Linearly Polarized Photoluminescence: Syntheses, Anisotropic Properties, and Facile Control of Uniaxial Orientation

Carbon quantum dots (CQDs) have been extensively explored in diverse fields because of their exceptional features. The nanometric particles with photoluminescence (PL) benefit various optical and photonic applications. However, the majority of previous reports have mainly focused on either unpolarized or circular-polarized (CP) PL. Linearly polarized (LP) emission of CQDs is limited mainly because of their isometric shape and difficulties in macroscopic orientation control. Herein, we report syntheses of anisometric CQDs and facile control of the uniaxial orientation on a macroscopic scale, which results in linearly polarized photoluminescence (LP-PL). The anisometric CQDs are synthesized from rigid-rod-shaped precursors and evenly dispersed in the rod-like liquid crystal (LC) host. As-synthesized CQDs exhibit a PL quantum yield as high as 35% in chloroform. In addition to uniform alignment, facile directional switching of the elongated CQD is established by employing the electrical responsiveness of the CQD and host LC. Therefore, the dichroic photophysical properties of anisometric CQDs have been beneficially adopted for fabrications of polarization-sensitive and electrically switchable PL devices. Also, anisometric CQDs are embedded in polymer films with molecular orientational patterns and clearly recognized by LP-PL.

Comparative life cycle assessment of high-yield synthesis routes for carbon dots

Carbon dots (CDs) are carbon-based nanomaterials with advantageous luminescent properties, making them promising alternatives to other molecular and nanosized fluorophores. However, the development of CDs is impaired by the low synthesis yield of standard fabrication strategies, making high-yield strategies essential. To help future studies to focus on cleaner production strategies, we have employed a Life Cycle Assessment (LCA) to compare and understand the environmental impacts of available routes for the high-yield synthesis of carbon dots. These routes were: (1) production of hydrochar, via hydrothermal treatment of carbon precursors, and its alkaline-peroxide treatment into high-yield carbon dots; (2) thermal treatment of carbon precursors mixed in a eutectic mixture of salts. Results show that the first synthesis route is associated with the lowest environmental impacts. This is attributed to the absence of the mixture of salts in the first synthesis route, which offsets its higher electricity consumption. Sensitivity analysis showed that the most critical parameter in the different synthetic strategies is the identity of the carbon precursor, with electricity being also relevant for the first synthesis route. Nevertheless, the use of some carbon precursors (as citric acid) with higher associated environmental impacts may be justified by their beneficial role in increasing the luminescent performance of carbon dots. Thus, the first synthesis route is indicated to be the most environmental benign and should be used as a basis in future studies aimed to the cleaner and high-yield production of carbon dots.

Electrochemical DNA detection of hepatitis E virus genotype 3 using PbS quantum dot labelling

The aim of this study was to develop a highly specific electrochemical DNA sensor using functionalized lead sulphide (PbS) quantum dots for hepatitis E virus genotype 3 (HEV3) DNA target detection. Functionalized-PbS quantum dots (QDs) were used as an electrochemical label for the detection of HEV3-DNA target by the technique of square wave anodic stripping voltammetry (SWASV). The functionalized-PbS quantum dots were characterized by UV-vis, FTIR, XRD, TEM and zeta potential techniques. As-prepared, functionalized-PbS quantum dots have an average size of 4.15 ± 1.35 nm. The detection platform exhibited LOD and LOQ values of 1.23 fM and 2.11 fM, respectively. HEV3-DNA target spiked serum is also reported.Graphical abstract.

Nitrogen and Phosphorus Co-Doped Carbon Dots for Selective Detection of Nitro Explosives

In this work, a highly selective and sensitive method has been developed for the detection of trinitrophenol (TNP), which is a dangerous explosive. For this purpose, N and P co-doped carbon dots (NP-Cdots) have been used. Synthesis of N and P co-doped carbon dots has been carried out by a simple and quick method. X-ray photoelectron spectroscopy analysis was carried out to detect the doping of N and P. These carbon dots are insoluble in water (inNP-Cdots). These carbon dots were functionalized by treating them with conc. HNO3 so that they become water-soluble (wsNP-Cdots). These dots were characterized by different analytical techniques such as IR, UV-vis, and fluorescence spectroscopy. The as-prepared wsNP-Cdots have good fluorescence properties. The average diameter of wsNP-Cdots is found to be 5.7 nm with an interlayer spacing (d-spacing) of 0.16 nm. The as-prepared wsNP-Cdots are highly sensitive and selective toward TNP, as observed using a fluorescence quenching technique. The quenching constant for TNP is found to be very high (8.06 × 104 M-1), which indicates its high quenching ability. The limit of detection is found to be 23 μM.

Surface-passivated, soluble and non-toxic graphene nano-sheets for the selective sensing of toxic Cr(vi) and Hg(ii) metal ions and as a blue fluorescent ink

Non-toxic amine-functionalized soluble graphene nano-sheets (f-GNS) were synthesized by using an old and well-known simple organic procedure. The f-GNS exhibited enhanced optical properties, such as strong blue fluorescence emission with a high value of quantum yield (∼13%). The O,O'-bis-(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol 800 as block polymeric amine (BPA)-passivized surface of f-GNS exhibited high aqueous solubility and excitation-dependent fluorescence emission behavior with a strong photo-stability performance. These f-GNS were tested for the significant selective sensing of toxic metal ions Cr(vi) and Hg(ii) from various tested toxic metal ions. The sensing experiment was supported by cyclic voltammetry analysis. The dual metal ion sensing method based on fluorescence showed the limit of detection (LOD) of ∼56 nM for Cr(vi) and ∼45 nM for Hg(ii) through a fluorescence quenching process. f-GNS were found to be non-toxic when tested over Escherichia coli (E.coli) cells. Additionally, the strong blue emission properties of f-GNS enabled their use as a suitable blue fluorescent ink under UV light illumination.

Chemically Synthesized Carbon Nanorods with Dual Polarized Emission

We realized the synthesis of carbon nanorods-monodisperse colloidal particles with a length of 50 nm and a width of 20 nm-which can be considered an addition to the family of light-emitting carbon-based nanostructures. Their anisotropic shape is determined by the use of the surfactant aminopropylisobutyl polyhedral oligomeric silsesquioxane, and their optical properties originate from domains of polycyclic aromatic hydrocarbons incorporated within an inorganic framework. The nanorods show dual polarized emission with a quantum yield of 15-20% and emission anisotropy of ∼0.3, which changes from blue (460 nm) to yellow (565 nm) depending on the excitation wavelength. These carbon nanorods expand the range of light-emitting carbon nanomaterials available for optoelectronic and biolabeling applications.

Blue and green luminescent carbon nanodots from controllable fuel-rich flame reactors

The continuous synthesis in controlled gas flame reactors is here demonstrated as a very effective approach for the direct and easy production of structurally reproducible carbon nanodots. In this work, the design of a simple deposition system, inserted into the reactor, is introduced. A controlled flame reactor is employed in the present investigation. The system was optimized for the production of carbon nanoparticles including fluorescent nanocarbons. Blue and green fluorescent carbon could be easily separated from the carbon nanoparticles by extraction with organic solvents and characterized by advanced chemical (size exclusion chromatography and mass spectrometry) and spectroscopic analysis. The blue fluorescent carbon comprised a mixture of molecular fluorophores and aromatic domains; the green fluorescent carbon was composed of aromatic domains (10–20 aromatic condensed rings), bonded and/or turbostratically stacked together. The green-fluorescent carbon nanodots produced in the flame reactor were insoluble in water but soluble in N-methylpyrrolidinone and showed excitation-independent luminescence. These results provide insights for a simple and controlled synthesis of carbon nanodots with specific and versatile features, which is a promising pathway for their use in quite different applicative sectors of bioimaging.

Soluble non-toxic carbon nano-rods for the selective sensing of iron(iii) and chromium(vi)

A simpler methodology has reported for the fabrication of non-toxic functionalized soluble carbon nano-rods for the sensing of Fe(iii) and Cr(vi) in aqueous media.

Carbon-based quantum particles: an electroanalytical and biomedical perspective

Carbon-based quantum particles, especially spherical carbon quantum dots (CQDs) and nanosheets like graphene quantum dots (GQDs), are an emerging class of quantum dots with unique properties owing to their quantum confinement effect.

Exploration of nano carbons in relevance to plant systems

The potential applications of nano-carbons and biochar towards plant growth are highlighted and discussed in this perspective article.

Detection of trace concentrations of S-nitrosothiols by means of a capacitive sensor

Small molecule S-nitrosothiols are a class of endogenous chemicals in the body, which have been implicated in a variety of biological functions. However, the labile nature of NO and the limits of current detection assays have made studying these molecules difficult. Here we present a method for detecting trace concentrations of S-nitrosothiols in biological fluids. Capacitive sensors when coupled to a semiconducting material represent a method for detecting trace quantities of a chemical in complex solutions. We have taken advantage of the semiconducting and chemical properties of polydopamine to construct a capacitive sensor and associated method of use, which specifically senses S-nitrosothiols in complex biological solutions.

Enhanced-quantum yield sulfur/nitrogen co-doped fluorescent carbon nanodots produced from biomass Enteromorpha prolifera: synthesis, posttreatment, applications and mechanism study

Enteromorpha prolifera (E. prolifera), one of the main algae genera for green tide, significantly influences both the coastal ecological environment and seawater quality. How to effectively utilize this waste as reproducible raw resource with credible application mechanism are urgent environmental issues to be solved. Herein, E. prolifera was converted to attractive fluorescent carbon nanodots (CNDs) by one-pot green hydrothermal process. The purity and quantum yields for the as-prepared CNDs can be enhanced upon the post-treatment of ethanol sedimentation. The CNDs can be well dispersed in aqueous medium with uniform spherical morphology, narrow size distribution and average size of 2.75 ± 0.12 nm. The ease synthesis and relatively high quantum yields of the CNDs make E. prolifera inexpensive benefit to the human and nature, such as applications in efficient cell imaging and fiber staining. Furthermore, it was discovered that the fluorescence intensity of the CNDs can be selectively quenched upon Fe3+ addition, which can be used for specific sensitive assay and removal of Fe3+ in aqueous medium. More importantly, it was reasonably proposed that the quenching was resulted from the synergistic effects of CNDs aggregation and Fe3+-CNDs charge-transfer transitions due to the coordination interactions between Fe3+ and the oxygenous groups on the CNDs.

Temperature dependent, shape variant synthesis of photoluminescent and biocompatible carbon nanostructures from almond husk for applications in dye removal

The effect of the carbonization temperature on the morphology and properties of synthesized water soluble photoluminescent carbon nanostructures from almond husks have been investigated.

Green synthesis of carbon quantum dots from lemon peel waste: applications in sensing and photocatalysis

Water soluble carbon quantum dots were synthesized from lemon peel waste and were used for Cr⁶⁺ detection and photocatalytic degradation of methylene blue dye.

From the traditional way of pyrolysis to tunable photoluminescent water soluble carbon nano-onions for cell imaging and selective sensing of glucose

Water soluble photoluminescent carbon nano-onions were synthesized from vegetable ghee using traditional pyrolytic approach for imaging cells and selective-immediate detection of glucose via fluorescent “turn-off”/“turn-on” technique.