Rapid synthesis of a PtRu nano-sponge with different surface compositions and performance evaluation for methanol electrooxidation

One-Pot Microwave-Assisted Synthesis of Graphene-Supported PtCoM (M = Mn, Ru, Mo) Catalysts for Low-Temperature Fuel Cells

In this study, one-pot microwave-assisted synthesis was used to fabricate the graphene (GR)-supported PtCoM catalysts where M = Mn, Ru, and Mo. The catalysts with the molar ratios of metals Pt:Co:Mn, Pt:Co:Ru, and Pt:Co:Mo equal to 1:3:1, 1:2:2, and 7:2:1, respectively, were prepared. Catalysts were characterized using Transmission Electron Microscopy (TEM). The electrocatalytic activity of the GR-supported PtCoMn, PtCoRu, and PtCoMo catalysts was evaluated toward methanol oxidation in an alkaline medium employing cyclic voltammetry and chrono-techniques. The most efficient electrochemical characteristics demonstrated the PtCoMn/GR catalyst with a current density value of 144.5 mA cm−2, which was up to 4.8 times higher than that at the PtCoRu(1:2:2)/GR, PtCoMo(7:2:1)/GR, and bare Pt/GR catalysts.

A New ternary organometallic Pd(ii)/Fe(iii)/Ru(iii) self-assembly monolayer: the essential ensemble synergistic for improving catalytic activity

The synergistic catalytic effect in a hetero-trimetallic catalytic monolayer is one of the intriguing topics because the additive effects of the second or third component play an important role in improving the activity. In this paper, a new Schiff-base organometallic nanosheet containing Pd/Fe/Ru immobilized on graphene oxide (GO@H-Pd/Fe/Ru) was prepared and characterized. The catalytic performance of GO@H-Pd/Fe/Ru and synergistic effect were systematically investigated. GO@H-Pd/Fe/Ru was found to be an efficient catalyst with higher turnover frequency (TOF) (26 892 h-1) and stability with recyclability of at least 10 times in the Suzuki-Miyaura coupling reaction. The deactivation mechanism was caused by the aggregation of the active species, loss of the active species, the changes of the organometallic complex, and active sites covered by adsorbed elements during the catalytic process. GO@H-Pd/Fe/Ru was a heterogeneous catalyst, as confirmed by kinetic studies with in situ FT-IR, thermal filtration tests and poisoning tests. The real active center containing Pd, Ru and Fe arranged as Fe(iii)-Ru(iii)-Pd(ii)-Fe(iii) was proposed. Although Ru(iii) and Fe(iii) were shown to be less active or inactive, the addition of Fe and Ru could effectively improve the entire activity by their ''indirect'' function, in which Fe or Ru made Pd more negative and more stable. The ensemble synergistic effect between metals, the ligand and support was described as a process in which the electron was transferred from GOvia ligand to Ru, and then to Pd or from Fe to Pd to make Pd more negative, promoting the oxidation addition with aryl halide. Also, the vicinity of Ru around Pd as the promoter adsorbed aryl boronic acid, which facilitates its synergism to react with the oxidation intermediate to the trans-metallic intermediate.

Terpyridine-based Pd(ii)/Ni(ii) organometallic framework nano-sheets supported on graphene oxide-investigating the fabrication, tuning of catalytic properties and synergetic effects

Tailoring the structures of catalysts and the arrangement of organic bimetallic catalysts are essential in both fundamental research and applications. However, they still impose enormous challenges such as size and active species distribution, ordered uniformity, and controllable composition, which are critical in determining their specific activities and efficiency. Herein, a novel terpyridine-based hetero-bimetallic Ni/Pd nanosheet supported on graphene oxide (denoted as GO@Tpy-Ni/Pd) was fabricated, which exhibited higher catalytic activity, substrate applicability and recyclability for the Suzuki coupling reaction under mild conditions. The catalytic mechanism was heterogeneous catalysis at the interface and the synergetic effect between Pd and Ni resulted in a little Ni(0)/Pd(0) cluster including Pd(ii)/Ni(ii) as a whole being formed through electron transfer on the catalytic surface. This phenomenon could be interpreted as the nanoscale clusters of Ni/Pd being the real active centre stabilized by the ligand and GO and the synergetic effect. The absorption and desorption of different substrates and products on Ni/Pd clusters, as calculated by DFT, was proved to be another key factor.

The synergistic effect between Ni and Pd atom was the crucial factor for enhancing catalytic activity.

Synthesis of PtCoNiRu/C nanoparticles by spray drying combined with reduction sintering for methanol electro-oxidation

The controllable synthesis of carbon-supported platinum-based multicomponent alloys is important for the development and application of direct methanol fuel cells (DMFCs). In this paper, controllable synthesis of carbon-supported PtCoNiRu quaternary alloy is realized by spray drying and reduction sintering. The effects of reduction temperature on the size, morphology and catalytic properties of the metal nanoparticles were investigated. The electrochemical performance of the as-synthesized PtCoNiRu/C catalysts towards methanol electro-oxidation was studied using cyclic voltammetry (CV) and chronoamperometry. The results show that metal nanoparticles with uniform size and dispersity on the carbon surface can be obtained at a suitable sintering temperature, while the catalyst has a higher electrochemical active surface area (ECSA) and shows better catalytic activity and stability for methanol electro-oxidation. The method described in this study provides a new route for the manufacture of Pt alloy nanoparticles with higher catalytic activity and stability.

Structurally ordered PtSn intermetallic nanoparticles supported on ATO for efficient methanol oxidation reaction

The development of cost-effective methanol oxidation reaction (MOR) catalysts with a high activity and stability is highly desirable for direct methanol fuel cells. In this study, the structurally ordered PtSn intermetallic nanoparticles supported on Sb-doped SnO₂ (ATO) have been successfully synthesized in ethylene glycol (EG) solution at 200 °C. Pt NPs were firstly formed on ATO, followed by the transformation from Pt into hexagonal PtSn on the surface of ATO. The obtained structurally ordered PtSn intermetallic NPs supported on ATO demonstrate significantly enhanced MOR activity and durability in comparison with commercial Pt/C. Our PtSn intermetallic NPs supported on ATO show a MOR activity 4.1 times higher than that of commercial Pt/C catalysts. Accelerated durability tests indicate that the commercial Pt/C catalysts lose about 50% of their initial current density after 500 cycles while the Pt/ATO-200-3 h catalyst loses only about 15% of its initial current density. Our PtSn intermetallic NPs supported on ATO are also found to have higher CO tolerance than commercial Pt/C. This work demonstrates an important strategy to rationally design high-performance structurally ordered Pt-based intermetallic NP catalysts for fuel cells and other applications.

Pt and RhPt dendritic nanowires and their potential application as anodic catalysts for fuel cells

Fuel cells have a number of benefits over conventional combustion-based technologies and can be used in a range of important applications, including transportation, as well as stationary, portable and emergency backup power systems. One of the major challenges in this field, however lies in controlling catalyst design which is critical for developing efficient and cost-effective fuel cell technology. Herein, for the first time, we report a facile controlled synthesis of Pt and RhPt dendritic nanowires using ultrathin AuAg nanowires as sacrificial templates. These dendritic nanowires exhibit remarkable catalytic performance in the elecrochemical oxidation of methanol and formic acid. In particular, the RhPt dendritic nanostructures show very high resistance to catalyst poisoning in methanol oxidation. This research demonstrates the advantages of using bimetallic dendritic nanostructures and we believe that these materials and electrocatalytic studies are important for further advancement of fuel cell research and technology.

Ternary PtRuCu aerogels for enhanced methanol electrooxidation

Ternary PtRuCu aerogels are facilely synthesized by one-step in situ reduction. The formation of ternary PtRuCu aerogels can be completed within 2 hours owing to the accelerated gelation kinetics. Because of the unique porous architectures and synergistic effect, the optimized Pt4Ru1Cu5 aerogels exhibited good electrochemical performance for methanol oxidation reaction.

One-step green synthesis of composition-tunable Pt-Cu alloy nanowire networks with high catalytic activity for 4-nitrophenol reduction

Controlling the structure, morphology, and composition of noble metals is of great significance to improve the catalytic activity and stability of catalysts. Herein, we have successfully synthesized self-interconnecting Pt-Cu alloy nanowire networks (NWNs) with controllable compositions via the co-reduction of the metal precursors potassium chloroplatinate (K2PtCl6) and CuCl2 with sodium borohydride (NaBH4). Owing to the hydrogen bubbles formed by NaBH4 hydrolysis and oxidation as a dynamic template, the facile strategy was carried out without any organic solvent, capping agent, polymer, or special experimental device, ensuring that the surfaces of NWNs were definitely "clean". The performance of the as-prepared Pt-Cu alloy NWNs for the reduction of 4-NP was dramatically improved compared with that of pure Pt NWNs and the commercial Pt/C catalyst. Particularly, the PtCu NWNs with a Pt/Cu atomic ratio of 1 : 1 exhibited excellent catalytic activity and reusability for the reduction of toxic 4-NP. The reaction rate constant and activity factor of the PtCu NWNs reached 1.339 × 10-2 s-1 and 66.95 s-1 g-1, respectively, which were dramatically better than those of pure Pt NWNs (11.5-fold) and commercial Pt/C (13-fold). The superior catalytic activity and reusability can mainly be attributed to the clean surface, the synergistic effect of Cu and Pt atoms and the self-interconnecting nanowire network structure.

Facile Surfactant-Free Synthesis of Composition-Tunable Bimetallic PtCu Alloy Nanosponges for Direct Methanol Fuel Cell Applications

Sponge-like metal nanomaterials have been paid great attention due to their unique structure for wide applications in hydrogen storage, filtration, sensors, heterogeneous catalysis, and fuel cells. Here, we first use a facile, bottom-up method to successfully prepare composition-tunable PtCu alloy nanosponges constructed with sub-4.5 nm particle building blocks. Due to the porous structure, structure defects, and synergetic effect of Pt and Cu, the PtCu alloy nanosponges exhibit good electrocatalytic performances towards methanol oxidation. Compared with pure Pt nanosponges, the specific/mass activity on PtCu2 alloy nanosponges is 5.84/2.93 times that on pure Pt nanosponges. Furthermore, the stability and reactivation ability of PtCu alloy nanosponges are also superior to pure Pt nanosponges.

Facile Fabrication of Ordered Component-Tunable Heterobimetallic Self-Assembly Nanosheet for Catalyzing "Click" Reaction

How to maximize the number of desirable active sites on the surface of the catalyst and minimize the number of sites promoting undesirable side reactions is currently an important research topic. In this study, a new way based on the synergism to achieve the successful fabrication of an ordered heterobimetallic self-assembled monolayer (denoted as BMSAM) with a controlled composition and an excellent orientation of metals in the monolayer was developed. BMSAM consisting of phenanthroline and Schiff-base groups was prepared, and its novel heterobimetallic (Cu and Pd) self-assembled monolayer anchored in silicon (denoted as Si-Fmp-Cu-Pd BMSAM) with a controlled composition and a fixed position was fabricated and characterized by UV, cyclic voltammetry, Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and water-drop contact angle (WDCA) analyses. The effects of Si-Fmp-Cu-Pd BMSAM on its catalytic properties were also systematically investigated using "click" reaction as a template by WDCA, XPS, SEM, XRD, ICP-AES and in situ Fourier transform infrared analyses in a heterogeneous system. The results showed that the excellent catalytic characteristic could be attributed to the partial (ordered or proper distance) isolation of active sites displaying high densities of specific atomic ensembles. The catalytic reaction mechanism of the click reaction interpreted that the catalytic process mainly occurred on the surface of the monolayer, internal active site (Pd) and rationalized that the Cu(I) species and Pd(0) reduced from the Cu(II) and Pd(II) catalyst were active species, which had a proper distance between two different metals. The cuprate-triazole intermediate and the palladium intermediate, whose production is the key step, should lie in a proper position between the copper and active palladium sites, with which the reaction rate of transmetalation would be improved to increase the amount of the undesired Sonogashira coupling product.

Finely Composition-Tunable Synthesis of Ultrafine Wavy PtRu Nanowires as Effective Electrochemical Sensors for Dopamine Detection

Preparing Pt-based one-dimensional (1D) ultrafine nanowires with abundant structural defects/grain boundaries and exploring their novel applications have attracted great interest in real-world applications. Here we introduce an environmentally friendly, facile aqueous solution approach to directly prepare a series of sub-3.0 nm PtRu ultrafine wavy nanowires. Characterizations show that the PtRu nanowires are alloy polycrystalline structures with abundant structural defects/grain boundaries. We first introduce the as-synthesized PtRu nanowires into electrochemical biosensors for the detection of DA and find that the Pt₇Ru₃ nanowires exhibit excellent electrocatalytic activity to DA with fast response, ultralow limit of detection, and excellent selectivity at a potential of 0.3 V in 0.1 M phosphate buffered solution (pH 7.2). This study shows an effective approach to the development of ultrafine PtRu nanowires as electrocatalysts for electrochemical nonenzymatic dopamine biosensors.

Monodispersed sub-5.0 nm PtCu nanoalloys as enhanced bifunctional electrocatalysts for oxygen reduction reaction and ethanol oxidation reaction

The development of effective electrocatalysts with enhanced activity and stability for both the anode and the cathode reaction in fuel cells still remains a challenge. Here, we report a one-pot route to prepare monodispersed, uniform sub-5.0 nm PtCu alloy polyhedra with a narrow size distribution. These PtCu alloy polyhedra exhibit enhanced electrocatalytic activity for both cathode and anode reactions as compared to the commercial Pt/C catalyst under alkaline conditions. The specific activity and mass activity on Pt₆₈Cu₃₂ nanoalloys are 15 and 2.8 times that on Pt/C catalyst toward oxygen reduction reaction (ORR), respectively. And the peak current density and mass activity on Pt₆₈Cu₃₂ nanoalloys are 11.8 and 2.12 times that on Pt/C catalyst toward ethanol oxidation reaction (EOR), respectively. Furthermore, the as-synthesized Pt₆₈Cu₃₂ nanoalloys have much higher stability than commercial Pt/C black for both ORR and EOR. These experimental results show an effective approach to the development of monodispersed, sub-5.0 nm PtCu nanoalloys as bifunctional electrocatalysts for both the cathode and the anode reaction in fuel cells.

A porous ternary PtPdCu alloy with a spherical network structure for electrocatalytic methanol oxidation

A porous ternary alloy Pt₅PdCu₅ was prepared, which exhibits a unique spherical network structure with a high specific surface area of 86.9 m² g⁻¹ and enhanced electrocatalytic activity towards methanol oxidation.

Novel Metal Nanomaterials and Their Catalytic Applications

In the rapidly developing areas of nanotechnology, nano-scale materials as heterogeneous catalysts in the synthesis of organic molecules have gotten more and more attention. In this review, we will summarize the synthesis of several new types of noble metal nanostructures (FePt@Cu nanowires, Pt@Fe₂O₃ nanowires and bimetallic Pt@Ir nanocomplexes; Pt-Au heterostructures, Au-Pt bimetallic nanocomplexes and Pt/Pd bimetallic nanodendrites; Au nanowires, CuO@Ag nanowires and a series of Pd nanocatalysts) and their new catalytic applications in our group, to establish heterogeneous catalytic system in "green" environments. Further study shows that these materials have a higher catalytic activity and selectivity than previously reported nanocrystal catalysts in organic reactions, or show a superior electro-catalytic activity for the oxidation of methanol. The whole process might have a great impact to resolve the energy crisis and the environmental crisis that were caused by traditional chemical engineering. Furthermore, we hope that this article will provide a reference point for the noble metal nanomaterials' development that leads to new opportunities in nanocatalysis.