Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond

Synthetic, Electrochemical, DFT, and Synchrotron X-ray Charge-Density Studies on Oxo-centered Triruthenium Clusters Supported by Electron-Withdrawing Carboxylates

We herein report the synthesis, characterizations, and synchrotron X-ray charge-density studies of oxo-centered triruthenium(II,III,III) clusters [Ru3O(CHCl2COO)6(py)3] (1) and [Ru3O(CHCl2COO)6(CO)(py)2] (2) (py = pyridine). Dichloroacetate was chosen for its large scattering factor of the Cl atom, and its electron-withdrawing nature results in significant stabilization of the targeted lower-valent Ru3II,III,III state in the cluster framework. Multipole analysis revealed that the difference in electron populations between two crystallographically independent Ru centers is small for 1 (Δ = 0.30 e) but large for 2 (Δ = 1.46 e). Remarkable differences between 1 and 2 are also found in their static deformation density maps; substantial local charge depletion was found around the central μ3O atom for 1, which is less pronounced for 2. According to the topological characterization of Ru-μ3O bonds associated with the bond critical point, bcp, the electron density, ρbcp, is in the range of 0.79-0.89 e Å-3, and the total energy density, Hbcp, is in the range of -0.21 to -0.05 hartree Å-3. These findings represent the first charge-density distribution analysis of mixed-valence multinuclear Ru complexes including comparison between 3d and 4d transition-metal systems.

Four Redox Isomers of a [3 × 3] Copper-Iron Heterometal Grid

A mixed-valence heterometallic nonanuclear [3 × 3] grid complex, [CuI2CuII6FeIII(L)6](BF4)5·MeOH·9H2O (1; MeOH = methanol), was synthesized by a one-pot reaction of copper and iron ions with multidentate ligand 2,6-bis[5-(2-pyridinyl)-1H-pyrazol-3-yl]pyridine (H2L). 1 showed five quasi-reversible one-electron redox processes centered at +0.74, +0.60, +0.39, +0.27, and -0.13 V versus SCE, assignable to four CuI/CuII processes and one FeII/FeIII couple, respectively. The two-electron-oxidized species [CuII8FeIII(L)6](PF6)7·4MeOH·7H2O (12eOx), the two-electron-reduced species [CuI4CuII4FeIII(L)6](PF6)3·2H2O (12eRed), and the three-electron-reduced species [CuI4CuII4FeII(L)6](PF6)2·5MeOH·H2O (13eRed) were isolated electrochemically. The four redox isomers were characterized by single-crystal X-ray analysis, SQUID magnetometry, and Mössbauer spectroscopy.

Immobilizing a π-Conjugated Catecholato Framework on Surfaces of SiO2 Insulator Films via a One-Atom Anchor of a Platinum Metal Center to Modulate Organic Transistor Performance

Chemical modification of insulating material surfaces is an important methodology to improve the performance of organic field-effect transistors (OFETs). However, few redox-active self-assembled monolayers (SAMs) have been constructed on gate insulator film surfaces, in contrast to the numerous SAMs formed on many types of conducting electrodes. In this study, we report a new approach to introduce a π-conjugated organic fragment in close proximity to an insulating material surface via a transition metal center acting as a one-atom anchor. On the basis of the reported coordination chemistry of a catecholato complex of Pt(II) in solution, we demonstrate that ligand exchange can occur on an insulating material surface, affording SAMs on the SiO₂ surface derived from a newly synthesized Pt(II) complex containing a benzothienobenzothiophene (BTBT) framework in the catecholato ligand. The resultant SAMs were characterized in detail by water contact angle measurements, X-ray photoelectron spectroscopy, atomic force microscopy, and cyclic voltammetry. The SAMs served as good scaffolds of π-conjugated pillars for forming thin films of a well-known organic semiconductor C8-BTBT (2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene), accompanied by the engagements of the C8-BTBT molecules with the SAMs containing the common BTBT framework at the first layer on SiO₂. OFETs containing the SAMs displayed improved performance in terms of hole mobility and onset voltage, presumably because of the unique interfacial structure between the organic semiconducting and inorganic insulating layers. These findings provide important insight into creating new elaborate interfaces through installing coordination chemistry in solution to solid surfaces, as well as OFET design by considering the compatibility between SAMs and organic semiconductors.

Multidentate Anchors for Surface Functionalization

The bottom-up functionalization of solid surfaces shows increasing importance for a wide range of interdisciplinary applications. Multidentate anchors with more than two contact points can bind to solid surfaces with strong chemisorption, well-defined upright configuration, and tailored functionality. The surface functionalization using multidentate anchors with three (tripodal), four (quadripodal), or more binding points is summarized herein, with a focus on those beyond classical tripodal anchors. In particular, the molecular design on how to achieve multisite interaction between anchor and substrate and the introduction of functional groups to thin films are discussed.

Bio-inspired protonic memristor devices based on metal complexes with proton-coupled electron transfer

A new type of memristor inspired by bio-membranes is presented, based on the proton movement resulting from proton-coupled electron transfer (PCET) processes in dinuclear Ru complexes, whereby a two-terminal device based on said Ru complexes and a proton-conducting polymer was constructed as a proof-of-concept. Two ITO electrodes were modified separately with dinuclear Ru complexes that bear tetraphosphonic acid linkers at both ends and a 2,6,2',6'-tetrakis(benzimidazol-2-yl)-4,4'-bipyridine (RuNH-OH) or 1,3,1',3'-tetrakis(benzimidazol-2-yl)-5,5'-biphenyl (RuCH-OH) bridging ligand, and both ITO electrodes exhibit PCET processes with different Ru(ii/iii) redox potentials and pKa values. Poly(4-vinylpyridine) (P4VP; pKa = 4-5), a proton-conducting polymer, was sandwiched between the two modified ITO electrodes to construct a two-terminal device of the type ITO|(RuNH-OH)3|P4VP|(RuCH-OH)3|ITO. Initially, the oxidation state of the metal centers in RuNH-OH and RuCH-OH is Ru(ii) and Ru(iii), respectively. Upon applying a bias voltage between the two ITO electrodes, the high and low current states switch at approximately ±1.10 V due to Ru(ii/iii) redox reactions. At the RuNH-OH|P4VP and RuCH-OH|P4VP interfaces, a proton is released from Ru(ii)NH-OH and subsequently captured by Ru(iii)CH-OH through the hydrogen-bonding interaction with the P4VP polymer, which is driven by the changes in the pKa values of the Ru complexes from 4.1-8.8 [Ru(ii)NH-OH] to <3.8 [Ru(iii)NH-OH] and from <8.4 [Ru(ii)CH-OH] to 5.2-9.8 [Ru(iii)CH-OH] under these conditions. The redox reactions on the modified Ru films create a large proton gradient between the two electrodes, enhancing the proton conductivity through the P4VP layer (pKa = 4-5). When the applied bias potential was inverted, the pKa gradient returned to the original state and the current decreased. Such a proton-conductivity enhancement is relevant to the transport of protons by proton gradients in bio-membranes. Therefore, the present protonic coordination-network films containing metal complexes that exhibit PCET should open new avenues for the design of a new type of memristor devices mimicking the function of synapses.

Understanding the charge transport properties of redox active metal-organic conjugated wires

For Rh₂-organic molecular wires, we found that weaker coupling systems built using longer bridging ligands exhibit better electrical conductance.

Layer-by-layer assembly of the dirhodium complex [Rh₂(O₂CCH₃)₄] (Rh₂) with linear N,N′-bidentate ligands pyrazine (L_S) or 1,2-bis(4-pyridyl)ethene (L_L) on a gold substrate has developed two series of redox active molecular wires, (Rh₂L_S)_n@Au and (Rh₂L_L)_n@Au (n = 1–6). By controlling the number of assembling cycles, the molecular wires in the two series vary systematically in length, as characterized by UV-vis spectroscopy, cyclic voltammetry and atomic force microscopy. The current–voltage characteristics recorded by conductive probe atomic force microscopy indicate a mechanistic transition for charge transport from voltage-driven to electrical field-driven in wires with n = 4, irrespective of the nature and length of the wires. Whilst weak length dependence of electrical resistance is observed for both series, (Rh₂L_L)_n@Au wires exhibit smaller distance attenuation factors (β) in both the tunneling (β = 0.044 Å^–1) and hopping (β = 0.003 Å^–1) regimes, although in (Rh₂L_S)_n@Au the electronic coupling between the adjacent Rh₂ centers is stronger. DFT calculations reveal that these wires have a π-conjugated molecular backbone established through π(Rh₂)–π(L) orbital interactions, and (Rh₂L_L)_n@Au has a smaller energy gap between the filled π*(Rh₂) and the empty π*(L) orbitals. Thus, for (Rh₂L_L)_n@Au, electron hopping across the bridge is facilitated by the decreased metal to ligand charge transfer gap, while in (Rh₂L_S)_n@Au the hopping pathway is disfavored likely due to the increased Coulomb repulsion. On this basis, we propose that the super-exchange tunneling and the underlying incoherent hopping are the dominant charge transport mechanisms for shorter (n ≤ 4) and longer (n > 4) wires, respectively, and the Rh₂L subunits in mixed-valence states alternately arranged along the wire serve as the hopping sites.

Humidity-controlled rectification switching in ruthenium-complex molecular junctions

Although molecular rectifiers were proposed over four decades ago ^1,2 , until recently reported rectification ratios (RR) were rather moderate ^2-11 (RR ~ 10¹). This ceiling was convincingly broken using a eutectic GaIn top contact ¹² to probe molecular monolayers of coupled ferrocene groups (RR ~ 10⁵), as well as using scanning tunnelling microscopy-break junctions ^13-16 and mechanically controlled break junctions ¹⁷ to probe single molecules (RR ~ 10²-10³). Here, we demonstrate a device based on a molecular monolayer in which the RR can be switched by more than three orders of magnitude (between RR ~ 10⁰ and RR ≥ 10³) in response to humidity. As the relative humidity is toggled between 5% and 60%, the current-voltage (I-V) characteristics of a monolayer of di-nuclear Ru-complex molecules reversibly change from symmetric to strongly asymmetric (diode-like). Key to this behaviour is the presence of two localized molecular orbitals in series, which are nearly degenerate in dry circumstances but become misaligned under high humidity conditions, due to the displacement of counter ions (PF₆^-). This asymmetric gating of the two relevant localized molecular orbital levels results in humidity-controlled diode-like behaviour.

Robust resistive memory devices using solution-processable metal-coordinated azo aromatics

Non-volatile memories will play a decisive role in the next generation of digital technology. Flash memories are currently the key player in the field, yet they fail to meet the commercial demands of scalability and endurance. Resistive memory devices, and in particular memories based on low-cost, solution-processable and chemically tunable organic materials, are promising alternatives explored by the industry. However, to date, they have been lacking the performance and mechanistic understanding required for commercial translation. Here we report a resistive memory device based on a spin-coated active layer of a transition-metal complex, which shows high reproducibility (∼350 devices), fast switching (≤30 ns), excellent endurance (∼10¹² cycles), stability (>10⁶ s) and scalability (down to ∼60 nm²). In situ Raman and ultraviolet-visible spectroscopy alongside spectroelectrochemistry and quantum chemical calculations demonstrate that the redox state of the ligands determines the switching states of the device whereas the counterions control the hysteresis. This insight may accelerate the technological deployment of organic resistive memories.

Supramolecular photocatalysts constructed with a photosensitizer unit with two tridentate ligands for CO2 reduction

New supramolecular photocatalysts comprising an asymmetric bis-tridentate Ru(ii) complex that functions as a photosensitizer and a Ru(ii) carbonyl complex as the catalyst were designed. The complexes photocatalyzed the reduction of CO₂ to CO or formic acid with high selectivity. The product distribution depended on the catalyst unit. CO and formic acid were the main products when using [Ru(BL)(Clbpy)(CO)]²⁺ (BL = bridging ligand, Clbpy = 4,4′-dichloro-2,2′-bipyridine) and Ru(BL)(CO)₂Cl₂ catalysts, respectively.

Stepwise fabrication of donor/acceptor thin films with a charge-transfer molecular wire motif

Novel thin films composed of a donor (D)/acceptor (A) charge-transfer chain compound were fabricated by a layer-by-layer technique using complexation of a paddlewheel-type diruthenium(ii, ii) complex with an N,N'-dicyanoquinonediimine derivative on an ITO substrate with a pyridine-substituted phosphonate anchor. The stepwise growth of an electron-transfer D⁺A^--chain thin film was confirmed.

Innovation in Layer-by-Layer Assembly

Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.

A redox-active radical as an effective nanoelectronic component: stability and electrochemical tunnelling spectroscopy in ionic liquids

A redox-active persistent perchlorotriphenylmethyl (PTM) radical chemically linked to gold exhibits stable electrochemical activity in ionic liquids. Electrochemical tunnelling spectroscopy in this medium demonstrates that the PTM radical shows a highly effective redox-mediated current enhancement, demonstrating its applicability as an active nanometer-scale electronic component.

Free-standing α-Co(OH)2/graphene oxide thin films fabricated through delamination and reassembling of acetate anions intercalated α-Co(OH)2 and graphene oxide in water

A novel hydrothermal process is demonstrated to prepare acetate anions intercalated α-Co(OH)2 that can be delaminated in water without any additional anion exchange processes. Positively charged Co(OH)2 nanosheets with lateral size of hundreds of nanometers and thickness less than 2 nm can be obtained by dispersing the as-obtained α-Co(OH)2 into water followed by sonication. The exfoliated Co(OH)2 nanosheets can be restacked into its original structure with different interlayer d-spacings. A flexible free-standing film with stacking Co(OH)2 nanosheets and graphene oxide (GO) layers can be obtained through flocculation of the Co(OH)2 nanosheets with GO nanosheets suspensions followed by a vacuum filtration, but the content of Co(OH)2 has to be kept under a low value so as to obtain films with flexible nature. Electrochemical tests show that this kind of film is not suitable to be used as electrode material for supercapacitor and lithium ion battery, because the content of active material is not high and the compacted junction between opposite charged nanosheets will prevent the electrolyte from diffusing into the interlayer space.

Anion-induced palladium nanoparticle formation during the on-surface growth of molecular assemblies

We demonstrate a process that results in the formation of palladium nanoparticles during the assembly of molecular thin films. These nanoparticles are embedded in the films and are generated by a chemical reaction of the counter anions of the molecular components with the metal salt that is used for cross-linking these components.

Observation of an Orientation Change in Highly Oriented Layer-by-Layer Films of a Ruthenium Complex upon Oxidation Reaction

Layer-by-layer films composed of redox-active ruthenium dimer and Zr(IV) ions were fabricated on an indium tin oxide electrode. The fabricating behavior was monitored by cyclic voltammetry and UV-vis absorption spectral measurements. The orientation of the film was also monitored by grazing-incidence small-angle and wide-angle X-ray scattering (GISAXS) measurements, and it has been clarified that this film has a crystalline structure. The peaks obtained by GISAXS were changed upon oxidation reaction, which indicates that a change in the orientation of the ruthenium dimer occurred in the film.