Mild activation of CeO2-supported gold nanoclusters and insight into the catalytic behavior in CO oxidation

Advanced Functionalized Nanoclusters (Cu, Ag, and Au) as Effective Catalyst for Organic Transformation Reactions

A considerable amount of research has been carried out in recent years on synthesizing metal nanoclusters (NCs), which have wide applications in the field of optical materials with non-linear properties, bio-sensing, and catalysis. Aside from being structurally accurate, the atomically precise NCs possess well-defined compositions due to significant tailoring, both at the surface and the core, for certain functionalities. To illustrate the importance of atomically precise metal NCs for catalytic processes, this review emphasizes 1) the recent work on Cu, Ag, and Au NCs with their synthesis, 2) the parameters affecting the activity and selectivity of NCs catalysis, and 3) the discussion on the catalytic potential of these metal NCs. Additionally, metal NCs will facilitate the design of extremely active and selective catalysts for significant reactions by elucidating catalytic mechanisms at the atomic and molecular levels. Future advancements in the science of catalysis are expected to come from the potential to design NCs catalysts at the atomic level.

Structural evolution after oxidative pretreatment and CO oxidation of Au nanoclusters with different ligand shell composition: a view on the Au core

The reactivity of supported monolayer protected Au nanoclusters is directly affected by their structural dynamics under pretreatment and reaction conditions. The effect of different types of ligands of Au clusters supported on CeO₂ on their core structure evolution, under oxidative pretreatment and CO oxidation reaction, was investigated. X-ray absorption and X-ray photoelectron spectroscopy studies revealed that the clusters evolve to a similar core structure above 250 °C in all the cases, indicating the active role of the ligand-support interaction in the reaction.

Hydrogen generation of single alloy Pd/Pt quantum dots over Co3O4 nanoparticles via the hydrolysis of sodium borohydride at room temperature

To satisfy global energy demands and decrease the level of atmospheric greenhouse gases, alternative clean energy sources are required. Hydrogen is one of the most promising clean energy sources due to its high chemical energy density and near-zero greenhouse gas emissions. A single alloyed phase of Pd/Pt nanoclusters as quantum dots (QDs) was prepared and loaded over Co₃O₄ nanoparticles with a low loading percentage (1 wt.%) for hydrogen generation from the hydrolysis of NaBH₄ at room temperature. L-glutathione (SG) was used as a capping ligand. It was found that the single alloy catalyst (Pd_0.5–Pt_0.5)_n(SG)_m/Co₃O₄ caused a significant enhancement in hydrogen generation in comparison to the monometallic clusters (Pd_n(SG)_m and Pt_n(SG)_m). Moreover, the Pd/Pt alloy showed a positive synergistic effect compared to the physical mixture of Pd and Pt clusters (1:1) over Co₃O₄. The QDs alloy and monometallic Pd and Pt clusters exhibited well-dispersed particle size in ~ 1 nm. The (Pd_0.5–Pt_0.5)_n(SG)_m)/Co₃O₄ catalyst offers a high hydrogen generation rate (HGR) of 8333 mL min^− 1 g^− 1 at room temperature. The synergistic effect of Pd and Pt atoms in the nanoclusters alloy is the key point beyond this high activity, plus the prepared clusters' unique atomic packing structure and electronic properties. The effect of the NaBH₄ concentration, catalyst amount, and reaction temperature (25–60 °C) were investigated, where HGR reaches 50 L min^− 1 g^− 1 at 60 °C under the same reaction conditions. The prepared catalysts were analyzed by UV–Vis, TGA, HR-TEM, XRD, and N₂ adsorption/desorption techniques. The charge state of the Pd and Pt in monometallic and alloy nanoclusters is zero, as confirmed by X-ray photoelectron spectroscopy analysis. The catalysts showed high recyclability efficiency for at least five cycles due to the high leaching resistance of the alloy nanoclusters within the Co₃O₄ host. The prepared catalysts are highly efficient for energy-based applications.

A Review of State of the Art in Phosphine Ligated Gold Clusters and Application in Catalysis

Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.

CeO2 Supported Gold Nanocluster Catalysts for CO oxidation: Surface Evolution Influenced by the Ligand Shell

Monolayer protected Au nanocluster catalysts are known to undergo structural changes during catalytic reactions, including dissociation and migration of ligands onto the support, which strongly affects their activity and stability. To better understand how the nature of ligands influences the catalytic activity of such catalysts, three types of ceria supported Au nanoclusters with different kinds of ligands (thiolates, phosphines and a mixture thereof) have been studied, employing CO oxidation as model reaction. The thiolate‐protected Au₂₅/CeO₂ showed significantly higher CO conversion after activation at 250 °C than the cluster catalysts possessing phosphine ligands. Temperature programmed oxidation and in situ infrared spectroscopy revealed that while the phosphine ligands seemed to decompose and free Au surface was exposed, temperatures higher than 250 °C are required to efficiently remove them from the whole catalyst system. Moreover, the presence of residues on the support seemed to have much greater influence on the reactivity than the gold particle size.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

Toward the creation of high-performance heterogeneous catalysts by controlled ligand desorption from atomically precise metal nanoclusters

Ligand-protected metal nanoclusters controlled by atomic accuracy (i. e. atomically precise metal NCs) have recently attracted considerable attention as active sites in heterogeneous catalysts. Using these atomically precise metal NCs, it becomes possible to create novel heterogeneous catalysts based on a size-specific electronic/geometrical structure of metal NCs and understand the mechanism of the catalytic reaction easily. However, to create high-performance heterogeneous catalysts using atomically precise metal NCs, it is often necessary to remove the ligands from the metal NCs. This review summarizes previous studies on the creation of heterogeneous catalysts using atomically precise metal NCs while focusing on the calcination as a ligand-elimination method. Through this summary, we intend to share state-of-art techniques and knowledge on (1) experimental conditions suitable for creating high-performance heterogeneous catalysts (e.g., support type, metal NC type, ligand type, and calcination temperature), (2) the mechanism of calcination, and (3) the mechanism of catalytic reaction over the created heterogeneous catalyst. We also discuss (4) issues that should be addressed in the future toward the creation of high-performance heterogeneous catalysts using atomically precise metal NCs. The knowledge and issues described in this review are expected to lead to clear design guidelines for the creation of novel heterogeneous catalysts.

Ligand-Protected Ultrasmall Pd Nanoclusters Supported on Metal Oxide Surfaces for CO Oxidation: Does the Ligand Activate or Passivate the Pd Nanocatalyst?

Herein, we report on the synthesis of ultrasmall Pd nanoclusters (∼2 nm) protected by L-cysteine [HOCOCH(NH₂ )CH₂ SH] ligands (Pd_n (L-Cys)_m ) and supported on the surfaces of CeO₂ , TiO₂ , Fe₃ O₄ , and ZnO nanoparticles for CO catalytic oxidation. The Pd_n (L-Cys)_m nanoclusters supported on the reducible metal oxides CeO₂ , TiO₂ and Fe₃ O₄ exhibit a remarkable catalytic activity towards CO oxidation, significantly higher than the reported Pd nanoparticle catalysts. The high catalytic activity of the ligand-protected clusters Pd_n (L-Cys)_m is observed on the three reducible oxides where 100 % CO conversion occurs at 93-110 °C. The high activity is attributed to the ligand-protected Pd nanoclusters where the L-cysteine ligands aid in achieving monodispersity of the Pd clusters by limiting the cluster size to the active sub-2-nm region and decreasing the tendency of the clusters for agglomeration. In the case of the ceria support, a complete removal of the L-cysteine ligands results in connected agglomerated Pd clusters which are less reactive than the ligand-protected clusters. However, for the TiO₂ and Fe₃ O₄ supports, complete removal of the ligands from the Pd_n (L-Cys)_m clusters leads to a slight decrease in activity where the T_100% CO conversion occurs at 99 °C and 107 °C, respectively. The high porosity of the TiO₂ and Fe₃ O₄ supports appears to aid in efficient encapsulation of the bare Pd_n nanoclusters within the mesoporous pores of the support.

Dynamics of Pd Dopant Atoms inside Au Nanoclusters during Catalytic CO Oxidation

Doping gold nanoclusters with palladium has been reported to increase their catalytic activity and stability. PdAu24 nanoclusters, with the Pd dopant atom located at the center of the Au cluster core, were supported on titania and applied in catalytic CO oxidation, showing significantly higher activity than supported monometallic Au25 nanoclusters. After pretreatment, operando DRIFTS spectroscopy detected CO adsorbed on Pd during CO oxidation, indicating migration of the Pd dopant atom from the Au cluster core to the cluster surface. Increasing the number of Pd dopant atoms in the Au structure led to incorporation of Pd mostly in the S-(M-S) n protecting staples, as evidenced by in situ XAFS. A combination of oxidative and reductive thermal pretreatment resulted in the formation of isolated Pd surface sites within the Au surface. The combined analysis of in situ XAFS, operando DRIFTS, and ex situ XPS thus revealed the structural evolution of bimetallic PdAu nanoclusters, yielding a Pd single-site catalyst of 2.7 nm average particle size with improved CO oxidation activity.

Precisely modulating the surface sites on atomically monodispersed gold-based nanoclusters for controlling their catalytic performances

Atomically precise gold nanoclusters protected by ligands are being intensely investigated in current catalysis science, due to the definitive correlation between the catalytic properties and structures at an atomic level. By solving the crystal structures of the nanoclusters, coupled with in situ and ex situ spectroscopy, a very fundamental understanding can be achieved to learn what controls the catalytic activation, active site structure, and catalytic mechanism. Herein, we mainly focus on the recent progress in catalysis controlled by precisely modulating the surface structures of the nanoclusters, including the alteration of the surface motifs, the doping of heterogeneous atoms in the surface of the nanoclusters, and the surface ligand engineering. The article is expected to help not only gain deep insight into the crucial roles of surface motifs of the nanoclusters in regulating the catalytic properties, but also explore the wide catalytic applications of atomically precise nanoclusters by elaborately tailoring the surface of the nanoclusters.

Sub-monolayer Au9 cluster formation via pulsed nozzle cluster deposition

Submonolayer coverages of chemically synthesised triphenylphosphine-protected Au₉ clusters on mica and TiO₂ substrates were achieved through the development of a Pulsed Nozzle Cluster Deposition (PNCD) technique under high vacuum conditions. This method offers the deposition of pre-prepared, solvated clusters directly onto substrates in a vacuum without the potential for contamination from the atmosphere. AFM and TEM were used to investigate the rate of gold cluster deposition as a function of cluster solution concentration and the number of pulses, with pulse number showing the most effective control of the final deposition conditions. TEM and XPS were used to determine that the clusters retained their unique properties through the deposition process. Methanol solvent deposited in the PNCD process has been shown to be removable through post-deposition treatments. A physical model describing the vapour behaviour and solvent evaporation in a vacuum is also developed and presented.

The Dynamic Structure of Au38(SR)24 Nanoclusters Supported on CeO2 upon Pretreatment and CO Oxidation

Atomically precise thiolate protected Au nanoclusters Au38(SC2H4Ph)24 on CeO2 were used for in-situ (operando) extended X-ray absorption fine structure/diffuse reflectance infrared fourier transform spectroscopy and ex situ scanning transmission electron microscopy-high-angle annular dark-field imaging/X-ray photoelectron spectroscopy studies monitoring cluster structure changes induced by activation (ligand removal) and CO oxidation. Oxidative pretreatment at 150 °C "collapsed" the clusters' ligand shell, oxidizing the hydrocarbon backbone, but the S remaining on Au acted as poison. Oxidation at 250 °C produced bare Au surfaces by removing S which migrated to the support (forming Au+-S), leading to highest activity. During reaction, structural changes occurred via CO-induced Au and O-induced S migration to the support. The results reveal the dynamics of nanocluster catalysts and the underlying cluster chemistry.

Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO₂ hydrogenation, C–C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

Gold Nanoclusters as Electrocatalysts for Energy Conversion

Gold nanoclusters (Aun NCs) exhibit a size-specific electronic structure unlike bulk gold and can therefore be used as catalysts in various reactions. Ligand-protected Aun NCs can be synthesized with atomic precision, and the geometric structures of many Aun NCs have been determined by single-crystal X-ray diffraction analysis. In addition, Aun NCs can be doped with various types of elements. Clarification of the effects of changes to the chemical composition, geometric structure, and associated electronic state on catalytic activity would enable a deep understanding of the active sites and mechanisms in catalytic reactions as well as key factors for high activation. Furthermore, it may be possible to synthesize Aun NCs with properties that surpass those of conventional catalysts using the obtained design guidelines. With these expectations, catalyst research using Aun NCs as a model catalyst has been actively conducted in recent years. This review focuses on the application of Aun NCs as an electrocatalyst and outlines recent research progress.

Activation of atom-precise clusters for catalysis

The use of atom-precise, ligand-protected metal clusters has exceptional promise towards the fabrication of model supported-nanoparticle heterogeneous catalysts which have controlled sizes and compositions. One major challenge in the field involves the ease at which metallic clusters sinter upon removal of protected ligands, thus destroying the structural integrity of the model system. This review focuses on methods used to activate atom-precise thiolate-stabilized clusters for heterogeneous catalysis, and strategies that can be used to mitigate sintering. Thermal activation is the most commonly employed approach to activate atom-precise metal clusters, though a variety of chemical and photochemical activation strategies have also been reported. Material chemistry methods that can mitigate sintering are also explored, which include overcoating of clusters with metal oxide supports fabricated by sol-gel chemistry or atomic layer deposition of thin oxide films or encapsulating clusters within porous supports. In addition to focusing on the preservation of the size and morphology of deprotected metal clusters, the fate of the removed ligands is also explored, because detached and/or oxidized ligands can also greatly influence the overall properties of the catalyst systems. We also show that modern characterization techniques such as X-ray absorption spectroscopy and high-resolution electron microscopy have the capacity to enable careful monitoring of particle sintering upon activation of metal clusters.

Reversible Control of Chemoselectivity in Au38(SR)24 Nanocluster-Catalyzed Transfer Hydrogenation of Nitrobenzaldehyde Derivatives

Chemoselective hydrogenation of nitrobenzaldehyde derivatives is one of the important catalytic processes being studied in hydrogenation catalysis. In this work, we report for the first time the catalytic reaction over atomically precise gold nanocluster catalysts (Au₂₅, Au₃₈, Au₅₂, and Au₁₄₄) using potassium formate as the hydrogen source. A complete selectivity for hydrogenation of the aldehyde group, instead of the nitro group, is obtained. A distinct dependence on the size of nanocluster catalysts is also observed, in which the Au₃₈(SCH₂CH₂Ph)₂₄ gives rise to the highest catalytic activity. The catalyst also shows good versatility and recyclability. Interestingly, the ligand-off nanocluster changes its catalytic selectivity to the nitro hydrogenation, which is in contrast with the ligand-on catalyst. In addition, the selectivity can be restored by treating the ligand-off nanocluster catalyst with thiol. This reversible control of chemoselectivity is remarkable and may stimulate future work on the exploitation of such nanoclusters for hydrogenation catalysis with control over selectivity.

Ligand Migration from Cluster to Support: A Crucial Factor for Catalysis by Thiolate-protected Gold Clusters

Thiolate protected metal clusters are valuable precursors for the design of tailored nanosized catalysts. Their performance can be tuned precisely at atomic level, e. g. by the configuration/type of ligands or by partial/complete removal of the ligand shell through controlled pre-treatment steps. However, the interaction between the ligand shell and the oxide support, as well as ligand removal by oxidative pre-treatment, are still poorly understood. Typically, it was assumed that the thiolate ligands are simply converted into SO2, CO2 and H2O. Herein, we report the first detailed observation of sulfur ligand migration from Au to the oxide support upon deposition and oxidative pre-treatment, employing mainly S K-edge XANES. Consequently, thiolate ligand migration not only produces clean Au cluster surfaces but also the surrounding oxide support is modified by sulfur-containing species, with pronounced effects on catalytic properties.

Au25(SR)18: the captain of the great nanocluster ship

Noble metal nanoclusters are in the intermediate state between discrete atoms and plasmonic nanoparticles and are of significance due to their atomically accurate structures, intriguing properties, and great potential for applications in various fields. In addition, the size-dependent properties of nanoclusters construct a platform for thoroughly researching the structure (composition)-property correlations, which is favorable for obtaining novel nanomaterials with enhanced physicochemical properties. Thus far, more than 100 species of nanoclusters (mono-metallic Au or Ag nanoclusters, and bi- or tri-metallic alloy nanoclusters) with crystal structures have been reported. Among these nanoclusters, Au25(SR)18-the brightest molecular star in the nanocluster field-is capable of revealing the past developments and prospecting the future of the nanoclusters. Since being successfully synthesized (in 1998, with a 20-year history) and structurally determined (in 2008, with a 10-year history), Au25(SR)18 has stimulated the interest of chemists as well as material scientists, due to the early discovery, easy preparation, high stability, and easy functionalization and application of this molecular star. In this review, the preparation methods, crystal structures, physicochemical properties, and practical applications of Au25(SR)18 are summarized. The properties of Au25(SR)18 range from optics and chirality to magnetism and electrochemistry, and the property-oriented applications include catalysis, chemical imaging, sensing, biological labeling, biomedicine and beyond. Furthermore, the research progress on the Ag-based M25(SR)18 counterpart (i.e., Ag25(SR)18) is included in this review due to its homologous composition, construction and optical absorption to its gold-counterpart Au25(SR)18. Moreover, the alloying methods, metal-exchange sites and property alternations based on the templated Au25(SR)18 are highlighted. Finally, some perspectives and challenges for the future research of the Au25(SR)18 nanocluster are proposed (also holding true for all members in the nanocluster field). This review is directed toward the broader scientific community interested in the metal nanocluster field, and hopefully opens up new horizons for scientists studying nanomaterials. This review is based on the publications available up to March 2018.

Structural and catalytic properties of the Au25−xAgx(SCH3)18(x= 6, 7, 8) nanocluster

The structural trends in Ag_xAu_25−xalloyed nanoclusters are studied with exhaustive high-throughput calculations and the experimental catalytic activity is explained.

Thermally stable and highly active Pt/CeO2@SiO2 catalysts with a porous/hollow structure

One robust selective-etching approach is used to encapsulate Pt/CeO₂ composites into SiO₂ with a porous/hollow structure for enhanced thermal stability and catalytic activity.

Insight into the chemical adsorption properties of CO molecules supported on Au or Cu and hybridized Au-CuO nanoparticles

Although nanosized Au clusters have been well developed for many applications, fundamental understanding of their adsorption/activation behaviors in catalytic applications is still lacking, especially when other elements provide promotion or hybridization functions. Au hybridized with Cu element is a highly investigated system; Cu is in the same element group as Au and thus displays similar physicochemical properties. However, their hybrids are not well understood in terms of their chemical states and adsorption/activation properties. In this work, typical γ-Al₂O₃-supported Au and CuO as well as Au-CuO nanoparticles were prepared and characterized to explore their adsorption/activation properties in depth using CO as a probe molecule using advanced techniques, such as XPS, HR-TEM, temperature programmed experiments and operando DRIFT combined with mass spectra. It was found that gold and copper can both act as active sites during CO adsorption and activation. The CO-TPD and operando DRIFT results also revealed that CO molecules were able to react with surface oxygenated species, resulting in the direct formation of CO₂ over the three samples in the absence of gaseous O₂. The gold step sites (Au^step) participated more readily in the reaction, especially under gaseous O₂-free conditions. During adsorption, CO molecules were more preferentially adsorbed on Au⁰ sites at lower temperature comparing with those on the Cu⁰ sites. However, competitive adsorption occurred between CO adsorbed on Au⁰ and Cu⁰ with increased reaction temperature, and the synergy between the Au and Cu compositions was too strong to suppress the adsorption and activation of the CO molecules. The dynamic adsorption equilibrium over 120 °C to 200 °C resulted in the appearance of a hysteresis performance platform.

In Situ Assembly of Au Nanoclusters within Protein Hydrogel Networks

We report a new approach of in situ assembling gold nanoclusters (AuNCs) into hydrogel networks by exploiting the triple roles of protein as a gelator, a reducing agent as well as a template. The strategy simply involves the mixing of BSA and AuCl₄^- under alkaline condition. The obtained AuNCs-protein nanocomposite hydrogels with injectable and moldable features can be made into semi-transparent films or N-doped C/Au composites. Our work demonstrates the feasibility of fabricating AuNCs in situ embedded in hybrid hydrogels, which can serve as multifunctional precursors for constructing diverse nanocomposite materials.

Solvent-Free Chemical Approach to Synthesize Various Morphological Co3O4 for CO Oxidation

Co₃O₄ nanomaterials with diverse morphologies were usually synthesized in liquid phase accompanied by the template or surfactant under harsh conditions, which further restricted their practical application. Herein, we reported an extremely simple and practical solid-state chemical method to synthesize Co₃O₄-octahedrons, -plates, and -rods. Among these, the shape control of Co₃O₄-octahedrons and Co₃O₄-plates involve variation of the amount of reactant, and the formation of Co₃O₄-rods with {110} facet can be achieved by replacing the reactant. The formation of the Co₃O₄ nanomaterials with different morphologies originated from the different microenvironments of reaction and the structure of reactants. The catalytic activity of Co₃O₄ samples for CO oxidation was evaluated in normal feed gas. The as-prepared Co₃O₄-rods exposed {110} facet exhibited superior catalytic activity for CO oxidation, which can be attributed to more oxygen defects on Co₃O₄-rods surface. Additionally, Co₃O₄-rods exhibited excellent durablility (without pretreatment) in normal feed gas, even in the presence of moisture, comparable or better than that reported in the literature. The practical and environmental friendly solvent-free strategy provided a new promising route for large-scale preparation of (metal) oxide with remarkable CO oxidation performance for practical application.

From Galvanic to Anti-Galvanic Synthesis of Bimetallic Nanoparticles and Applications in Catalysis, Sensing, and Materials Science

The properties of two alloyed metals have been known since the Bronze Age to outperform those of a single metal. How alloying and mixing metals applies to the nanoworld is now attracting considerable attention. The galvanic process, which is more than two centuries old and involves the reduction of a noble-metal cation by a less noble metal, has not only been used in technological processes, but also in the design of nanomaterials for the synthesis of bimetallic transition-metal nanoparticles. The background and nanoscience applications of the galvanic reactions (GRs) are reviewed here, in particular with emphasis on recent progress in bimetallic catalysis. Very recently, new reactions have been discovered with nanomaterials that contradict the galvanic principle, and these reactions, called anti-galvanic reactions (AGRs), are now attracting much interest for their mechanistic, synthetic, catalytic, and sensor aspects. The second part of the review deals with these AGRs and compares GRs and AGRs, including the intriguing AGRs mechanism and the first applications.

Diphosphine-Protected Au22 Nanoclusters on Oxide Supports Are Active for Gas-Phase Catalysis without Ligand Removal

Investigation of atomically precise Au nanoclusters provides a route to understand the roles of coordination, size, and ligand effects on Au catalysis. Herein, we explored the catalytic behavior of a newly synthesized Au₂₂(L⁸)₆ nanocluster (L = 1,8-bis(diphenylphosphino) octane) with in situ uncoordinated Au sites supported on TiO₂, CeO₂, and Al₂O₃. Stability of the supported Au₂₂ nanoclusters was probed structurally by in situ extended X-ray absorption fine structure (EXAFS) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and their ability to adsorb and oxidize CO was investigated by IR absorption spectroscopy and a temperature-programmed flow reaction. Low-temperature CO oxidation activity was observed for the supported pristine Au₂₂(L⁸)₆ nanoclusters without ligand removal. Density functional theory (DFT) calculations confirmed that the eight uncoordinated Au sites in the intact Au₂₂(L⁸)₆ nanoclusters can chemisorb both CO and O₂. Use of isotopically labeled O₂ demonstrated that the reaction pathway occurs mainly through a redox mechanism, consistent with the observed support-dependent activity trend of CeO₂ > TiO₂ > Al₂O₃. We conclude that the uncoordinated Au sites in the intact Au₂₂(L⁸)₆ nanoclusters are capable of adsorbing CO, activating O₂, and catalyzing CO oxidation reaction. This work is the first clear demonstration of a ligand-protected intact Au nanocluster that is active for gas-phase catalysis without the need of ligand removal.

Heavily doped Au25–xAgx(SC6H11)18− nanoclusters: silver goes from the core to the surface

The Au₂₅(SR)₁₈ nanocluster (where R = c-C₆H₁₁) can be heavily doped with silver through Ag(i)–thiolate complex induced size/structure transformation of Au₂₃(SR)₁₆⁻ into Au_25–xAg_x(SR)₁₈⁻.