Efficient phosphate sequestration for water purification by unique sandwich-like MXene/magnetic iron oxide nanocomposites

Nitrogen-doped activated carbon composite electrode for deionization of phosphate removal and DFT model adsorption of phosphates

Phosphate discharge in sewage can result in water eutrophication, posing a threat to aquatic ecosystems. Membrane capacitive deionization (MCDI) has demonstrated outstanding performance and significant potential for salt removal and nutrient recovery. In this study, a nitrogen-doped activated carbon electrode material (NAC) was synthesized through one-step pyrolysis to selectively remove phosphate from MCDI. At a voltage of 1.2V, a flow rate of 20 mL/min, and a pH of 6.51, the phosphate adsorption capacity of the NAC electrode was determined to be 1.60 mg/g. The study revealed that NAC pHpzc increased from 4.14 to 6.44, effectively broadening the pH range for phosphate removal. In the presence of competing ions (NO3-, Cl-, and SO42-) at a concentration of 0.5 M, the electroadsorption capacity of phosphate decreased to 1.21 mg/g, 1.14 mg/g, and 1.02 mg/g, respectively. The kinetic parameters of adsorption indicated that NAC electroadsorbed phosphate through physical adsorption, with the maximum adsorption capacity achieved at 303K. Data from the Freundlich isothermal model suggested that phosphate adsorption by the NAC electrode involves a multilayer adsorption process. A carbon structure model of density functional theory (DFT), incorporating doped nitrogen, was constructed based on XPS analysis. Following nitrogen doping, the electrostatic potential (ESP) of unsaturated carbon atoms became more positive, enhancing the ability of nitrogen-doped activated carbon to adsorb phosphate. This study provides compelling evidence that nitrogen doping facilitates the adsorption of phosphate by carbon materials.

MXene-Derived Oxide Nanoheterostructures for Photocatalytic Sulfamethoxazole Degradation

Herein, we report for the first time the use of ternary oxide nanoheterostructure photocatalysts derived from (Nb y , Ti1-y )2CT x MXene in the treatment of water. Three different compositions of binary MXenes, viz., (Ti0.75Nb0.25)2CT x , (Ti0.5Nb0.5)2CT x , and (Ti0.25Nb0.75)2CT x (with T x = OH, F, and Cl), were used as single-source precursor to produce TiNbO x -3:1, TiNbO x -1:1, and TiNbO x -1:3 by controlled-atmosphere thermal oxidation. Phase identification and Le Bail refinements confirmed the presence of a mixture of rutile TiO2 and monoclinic Ti2Nb10O29. Morphological investigations through scanning and transmission electron microscopies revealed the retention of layered nanostructures from the MXene precursors and the fusion of TiO2 and Ti2Nb10O29 nanoparticles in forming nanosheets. Among the three oxide nanoheterostructures, TiNbO x -3:1 exhibited the best photocatalytic performance by the removal of 83% of sulfamethoxazole (SMX) after 2 h of reaction. Such a result is explained by a complex influence of structural, morphological, and electronic properties since TiNbO x -3:1 consisted of small-sized crystallites (40-70 nm) and possessed a higher surface area. The suggested electronic band structure is a type-II heterojunction, where the recombination of electrons and holes is minimized during photocatalytic reactions. The photocatalytic degradation of SMX was promoted by the attack of •OH, as evidenced by the detection of 2.2 μM •OH, using coumarin as a probe. This study highlights the potential application of MXene-derived oxide nanoheterostructures in wastewater treatment.

MXenes as emerging adsorbents for removal of environmental pollutants

MXenes are a recently emerging class of two-dimensional nanomaterials that have gained considerable interest in the field of environmental protection. Owing to their high surface area, abundant terminal groups, and unique two-dimensional layered structures, MXenes have demonstrated high efficacy as adsorbents for various pollutants. Here we focused on the latest developments in the field of MXene-based adsorbents, including the structure and properties of MXenes, their synthesis and modification methods, and their adsorption performance and mechanisms for various pollutants. Among the pollutants that have been reported to be adsorbed by MXenes are radionuclides (U(VI), Sr(II), Cs(I), Eu(III), Ba(II), Th(IV), and Tc(VII)/Re(VII)), heavy metals (Hg(II), Cu(II), Cr(VI), and Pb(II)), dyes, per- and polyfluoroalkyl substances (PFAS), antibiotics (tetracycline, ciprofloxacin, and sulfonamides), antibiotic resistance genes (ARGs), and other contaminates. Moreover, future directions in MXene research are also suggested in this review.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

A novel and ultrasensitive electrochemical immunosensor based on nanocellulose-Ti3C2Tx@ZrO2 nano framework for the detection of ovalbumin

A versatile and highly sensitive sensing platform based on nanocellulose/MXene/ZrO2 nano framework has been developed at the surface of a glassy carbon electrode (GCE) for detecting ovalbumin (Ova). To create this innovative nano framework, dialdehyde groups were introduced onto the surface of cellulose nanofibers (CNFs), which were then decorated with MXene nanosheets and nanostructured zirconia. Nanocellulose/MXene/ZrO2 nano framework was used as electrochemical mediator and immobilization environment that provided the large surface area and 197 % increment in the electrochemical signal which allowed the Ova detection in the femtomolar range. Ovalbumin antibody was immobilized on the surface of dialdehyde cellulose nanofiber through covalent bonding between amino groups of Ova and dialdehyde groups of CNFs. The assembly process of nano framework, anti-Ova, and Ova antigen were characterized using electrochemical approaches (CV and DPV). The fabricated immunosensor is further applied to DPV detection of Ova and it demonstrated a linear response to Ova antigen in the linear range of 0.01-1000 pg/mL. With optimal experimental conditions, the detection limit, quantification limit and sensitivity of Ova were found to be 1.1 fg/mL, 0.01 pg/mL and 0.1497 μA pg/mL cm-2, respectively. The fabricated immunosensor exhibited high selectivity, reproducibility, and interference resistance and achieved excellent recoveries in real food samples spiked with Ova, indicating its potential applicability in food safety monitoring.

MXene-based electrochemical devices applied for healthcare applications

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

Removing DOM from chloride modified hydrochar could improve Cu2+ adsorption capacity from aqueous solution

The behavior and composition of hydrochar-based dissolved organic matter (DOM) would affect the efficiency of copper (Cu) removal from wastewater through adsorption. In this study, the reed was hydrolyzed in the presence of feedwater with and without ZnCl2, FeCl3, and SnCl4 to produce pristine hydrochars (PHCs), which were named H2O-HC, ZnCl2-HC, FeCl3-HC, and SnCl4-HC. After removal of DOM, washed hydrochars (WHCs) were obtained, labelled as W-H2O-HC, W-ZnCl2-HC, W-FeCl3-HC, and W-SnCl4-HC. The release dynamics of DOM from PHCs were analyzed, and the adsorption behaviors of Cu2+ on both PHCs and WHCs were investigated. The results showed that chloride-modifications were beneficial for the porosity, specific surface area (SSA), and functional groups of WHCs. Meanwhile, the quantity of hydrochar-based DOM was significantly affected by chloride-modifications. In particular, the relative contents of Ar-P and Fa-L in the DOM released from hydrochars varied with time and modification. Furthermore, the Qe of Cu2+ adsorption on WHCs followed the order of W-SnCl4-HC > W-FeCl3-HC > W-ZnCl2-HC > W-H2O-HC at 15 °C. Compared to PHCs, the adsorption capacity of Cu2+ on WHCs was improved by 7.15-119.77% at the temperature of 35 °C. Simultaneously, the adsorption capacity of Cu2+ in WHCs showed a significant correlation with the SSA via physical adsorption (P < 0.05). Moreover, XPS analysis revealed that Cu2+ adsorption also occurred via complexation and chelation through newly formed Cu-O group between W-SnCl4-HC and Cu2+. Notably, the increase of Cu2+ adsorption in WHCs was significantly correlated with the release of Fa-L and Ar-P from PHCs (P < 0.05). This study found that the content and composition of hydrochar-based DOM could be a major driving factor for Cu2+ adsorption.

Ti3C2Tx MXene -facilitated non-selective trapping effect: Efficient SERS detection of exosomal PD-L1

Biosensors developed through a sandwich approach have demonstrated favorable detection performance for exosomal programmed cell death 1 ligand 1 (ExoPD-L1) detection. However, the reported PD-L1 antibodies, peptides, and aptamers utilized in these biosensors typically bind to the extracellular region, with overlapping binding sites that severely constrain the fabrication of biosensors. In this study, we present a simple approach to specifically identify and analyze ExoPD-L1 through the non-selective trapping effect of Ti3C2TX (X=-O, -F, -OH) MXene on exosomes via the formation of Ti-O-P complexation, and the selective capture of peptide-functionalized Au@MPBA (4-Mercaptophenylboronic acid) @SiO2 surface enhanced Raman scattering (SERS) tags on ExoPD-L1. The biosensor delivered a both hypersensitive and reliable performance in exosome detection with a low limit of detection (20.74 particles/mL) in the linear range of 102 to 5×106 particles/mL. Furthermore, the biosensor demonstrated excellent stability and interference resistance in detecting ExoPD-L1 in clinical serum samples, enabling the easy differentiation of breast cancer patients from healthy controls. This work provides new insights into the design of biosensors for exosome detection and can serve as a replicable template for sandwich immunoassay detection for other types of sensors, including but not limited to SERS.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Can MXene be the Effective Nanomaterial Family for the Membrane and Adsorption Technologies to Reach a Sustainable Green World?

Environmental pollution has intensified and accelerated due to a steady increase in the number of industries, and exploring methods to remove hazardous contaminants, which can be typically divided into inorganic and organic compounds, have become inevitable. Therefore, the development of efficacious technology for the separation processes is of paramount importance to ensure the environmental remediation. Membrane and adsorption technologies garnered attention, especially with the use of novel and high performing nanomaterials, which provide a target-specific solution. Specifically, widespread use of MXene nanomaterials in membrane and adsorption technologies has emerged due to their intriguing characteristics, combined with outstanding separation performance. In this review, we demonstrated the intrinsic properties of the MXene family for several separation applications, namely, gas separation, solvent dehydration, dye removal, separation of oil-in-water emulsions, heavy metal ion removal, removal of radionuclides, desalination, and other prominent separation applications. We highlighted the recent advancements used to tune separation potential of the MXene family such as the manipulation of surface chemistry, delamination or intercalation methods, and fabrication of composite or nanocomposite materials. Moreover, we focused on the aspects of stability, fouling, regenerability, and swelling, which deserve special attention when the MXene family is implemented in membrane and adsorption-based separation applications.

Anion Storage of MXenes

Recently, anion storage materials have gained significant attention owing to the widened cell voltage and additional anion storing capacity for a large energy density. MXenes are considered as the emerging anion storing materials owing to their sufficient interlayer spacing, rich surface chemistries, tunable structures, remarkable electrochemical properties, and mechanical integrity. Herein, a comprehensive review on the anion storage of MXenes covering their anion storage mechanism and state-of-the-art chemical strategies for the improved anion storage performances is reported. The recent progress of MXenes on aluminum ion batteries, metal halogen batteries, halogen ion batteries, and electrochemical electrode deionization is addressed. The scientific and technical challenges and the research direction into the anion storage of MXenes are also addressed and finally the authors' perspective on anion storage of MXenes is provided. Therefore, this review offers an insight into the rational design of MXenes for anion storage materials and the correlation of surface chemistries and structural modifications with anion storage properties for the applications into electrochemical energy storage and water purification.

Enhancing arsenate metabolism in Microcystis aeruginosa and relieving risks of arsenite and microcystins by nano-Fe2O3 under dissolved organic phosphorus conditions

Little information is available on how nano-Fe₂O₃ substituted iron ions as a possible iron source impacting on algal growth and arsenate (As(V)) metabolism under dissolved organic phosphorus (DOP) (D-glucose-6-phosphate (GP)) conditions. We investigated the growth of Microcystis aeruginosa and As(V) metabolism together with their metabolites in As(V) aquatic environments with nano-Fe₂O₃ and GP as the sole iron and P sources, respectively. Results showed that nano-Fe₂O₃ showed inhibitory effects on M. aeruginosa growth and microcystin (MCs) release under GP conditions in As(V) polluted water. There was little influence on As species changes in GP media under different nano-Fe₂O₃ concentrations except for obvious total As (TAs) removal in 100 mg L^-1 nano-Fe₂O₃ levels. As(V) metabolism dominated with As(V) biotransformation in algal cells was facilitated and arsenite (As(III)) releasing risk was relieved clearly by nano-Fe₂O₃ under GP conditions. The dissolved organic matter (DOM) in media exhibited more fatty acid analogs containing -CO, -CH₂ =CH₂, and -CH functional groups with increasing nano-Fe₂O₃ concentrations, but the fluorescent analogs were relatively reduced especially for the fluorescent DOM dominated by aromatic protein-like tryptophan which was significantly inhibited by nano-Fe₂O_3. Thus, As methylation that was facilitated in M. aeruginosa by nano-Fe₂O₃ in GP environments also caused more organic substances to release that absorb infrared spectra while reducing the release risks of As(III) and MCs as well as protein-containing tryptophan fractions. From ¹H-NMR analysis, this might be caused by the increased metabolites of aromatic compounds, organic acid/amino acid, and carbohydrates/glucose in algal cells. The findings are vital for a better understanding of nano-Fe₂O₃ role-playing in As bioremediation by microalgae and the subsequent potential aquatic ecological risks.

Magnetic Ti3C2 MXene Nanosheets Prepared for Enrichment of Phosphopeptides

MXenes have received lots of attention since discovered and have been applied in various fields. In this work, Ti₃C₂-Fe₃O₄ composites with exposed non-modified Ti₃C₂ MXene nanosheets were designed and prepared by an in situ growth strategy and then applied in the enrichment of phosphopeptides. The two-dimensional composites could interact with the phosphopeptides through a metal oxide affinity chromatography mechanism provided by Ti-O and Fe-O bonds and a hydrophilic interaction chromatography mechanism by surface hydroxyl groups. This magnetic nanomaterial with a specific surface area of 66.1 m²·g^-1 had high sensitivity to phosphopeptides (0.5 nmol·L^-1) and high selectivity (1:1000 of the molar ratio of β-casein to bovine serum albumin). Non-fat milk was adopted as a real sample to preliminarily examine the applicability of the Ti₃C₂-Fe₃O₄-based protocol. Subsequently, Qingkailing injection, a kind of traditional Chinese medicine injection, was introduced to further explore the suitability of the nanocomposites for phosphopeptide enrichment from more complex matrices and satisfactory results were obtained.

Novel three-dimensional Ti3C2-MXene embedded zirconium alginate aerogel adsorbent for efficient phosphate removal in water

Excessive phosphorus in water causes environmental security problems like eutrophication. Advanced two-dimensional material MXene has attracted raising attention in aquatic adsorption, while lack of selectivity and difficult recovery limit its application in phosphate removal. In this study, Ti₃C₂-MXene embedded zirconium-crosslinked SA (MX-ZrSA) beads were synthesized and their phosphate adsorption performance under different conditions was assessed. Investigations using SEM/EDS, XRD, BET, TGA and contact angle meter reveal that the addition of Ti₃C₂-MXene enhanced the thermal stability, mechanical strength, hydrophilicity, and formed loose network-like mesoporous inner structure with large surface area. The theoretical maximum adsorption capacity was 492.55 mg P/g and was well fitted by Freundlich and optimized Langmuir models. The Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis showed that chemisorption was involved, and the formation of Zr-O-P and Ti-O-P complexes accounted for high selectivity and affinity to phosphate. The adsorption experiments in real waters and lab-scale continuous flow Anaerobic-Anoxic-Oxic reactor further indicated the application potential of MX-ZrSA beads. Our study will provide insight into MXene and SA aerogel synergistic adsorption of aquatic contaminants and help with the removal and recovery of finite phosphorus resource.

In situ reduction of gold nanoparticles-decorated MXenes-based electrochemical sensing platform for KRAS gene detection

In this work, gold nanoparticles@Ti3C2 MXenes nanocomposites with excellent properties were combined with toehold-mediated DNA strand displacement reaction to construct an electrochemical circulating tumor DNA biosensor. The gold nanoparticles were synthesized in situ on the surface of Ti3C2 MXenes as a reducing and stabilizing agent. The good electrical conductivity of the gold nanoparticles@Ti3C2 MXenes composite and the nucleic acid amplification strategy of enzyme-free toehold-mediated DNA strand displacement reaction can be used to efficiently and specifically detect the non-small cell cancer biomarker circulating tumor DNA KRAS gene. The biosensor has a linear detection range of 10 fM −10 nM and a detection limit of 0.38 fM, and also efficiently distinguishes single base mismatched DNA sequences. The biosensor has been successfully used for the sensitive detection of KRAS gene G12D, which has excellent potential for clinical analysis and provides a new idea for the preparation of novel MXenes-based two-dimensional composites and their application in electrochemical DNA biosensors.

Retrospective on Exploring MXene-Based Nanomaterials: Photocatalytic Applications

Nanostructural two-dimensional compounds are grabbing the attention of researchers all around the world. This research is progressing quickly due to its wide range of applications in numerous industries and enormous promise for future technological breakthroughs. Growing environmental consciousness has made it vital to treat wastewater and avoid releasing hazardous substances into the environment. Rising consumer expectations have led to the emergence of new, frequently nonbiodegradable compounds. Due to their specific chemical and physical properties, MXenes have recently been identified as promising candidates. MXenes are regarded as a prospective route for environmental remediation technologies, such as photocatalysis, adsorption, and membrane separation, and as electrocatalytic sensors for pollution recognition because of their high hydrophilicity, inherent chemical nature, and robust electrochemistry. The development of catalysts based on MXene materials for the photocatalytic breakdown of pharmaceutical wastes in polluted water is critically evaluated in this study. With an emphasis on the degradation mechanism, the photocatalytic degradation of antibiotics using MXenes and MXene-based nanocomposites is explained in depth. We emphasize the significant difficulties in producing MXenes and their composites, as well as in the degradation of drugs. The successful use of MXenes in water filtration and suggestions for future study are also presented.

Efficient phosphate elimination from aqueous media by La/Fe bimetallic modified bentonite: Adsorption behavior and inner mechanism

Nowadays, eutrophication problem in surface waterbodies has attracted specific attention. Herein, we reported facile synthesis and application of La/Fe engineered bentonite (LFB) for efficient phosphate elimination. Results indicated that bimetallic modified LFB composite could achieve efficient phosphate removal at pH 2-6, and satisfactory selectivity was implied by stable phosphate capturing within the interference of competing species (Cl^-, NO₃^-, HCO₃^-, SO₄^2-, F^- and HA). Pseudo-second-order model could satisfactorily depict the kinetic behavior at different initial concentrations, indicating chemisorption of phosphate on LFB surface. Isotherm study suggested that phosphate adsorption behavior could be fitted well with Sips isotherm equation, indicating that both homogeneous monolayer adsorption and heterogeneous multilayer coverage of phosphate on LFB surface occurred within the investigated conditions. Adsorption thermodynamics implied the spontaneous and endothermic feature of phosphate loading on LFB composite. Characterization analysis confirmed successful La and Fe loading on bentonite, and electrostatic attraction and ligand exchange were the main adsorption mechanism. The high adsorption capacity, cost-effective feature and strong affinity towards phosphate demonstrated certain potential of as-prepared LFB composite for phosphate separation from eutrophic water.

Emergence of MXene and MXene-Polymer Hybrid Membranes as Future- Environmental Remediation Strategies

The continuous deterioration of the environment due to extensive industrialization and urbanization has raised the requirement to devise high-performance environmental remediation technologies. Membrane technologies, primarily based on conventional polymers, are the most commercialized air, water, solid, and radiation-based environmental remediation strategies. Low stability at high temperatures, swelling in organic contaminants, and poor selectivity are the fundamental issues associated with polymeric membranes restricting their scalable viability. Polymer-metal-carbides and nitrides (MXenes) hybrid membranes possess remarkable physicochemical attributes, including strong mechanical endurance, high mechanical flexibility, superior adsorptive behavior, and selective permeability, due to multi-interactions between polymers and MXene's surface functionalities. This review articulates the state-of-the-art MXene-polymer hybrid membranes, emphasizing its fabrication routes, enhanced physicochemical properties, and improved adsorptive behavior. It comprehensively summarizes the utilization of MXene-polymer hybrid membranes for environmental remediation applications, including water purification, desalination, ion-separation, gas separation and detection, containment adsorption, and electromagnetic and nuclear radiation shielding. Furthermore, the review highlights the associated bottlenecks of MXene-Polymer hybrid-membranes and its possible alternate solutions to meet industrial requirements. Discussed are opportunities and prospects related to MXene-polymer membrane to devise intelligent and next-generation environmental remediation strategies with the integration of modern age technologies of internet-of-things, artificial intelligence, machine-learning, 5G-communication and cloud-computing are elucidated.

Recent Advancement in Rational Design Modulation of MXene: A Voyage from Environmental Remediation to Energy Conversion and Storage

Use of MXenes (Ti₃ C₂ T_x ), which belongs to the family of two-dimensional transition metal nitrides and carbides by encompassing unique combination of metallic conductivity and hydrophilicity, is receiving tremendous attention, since its discovery as energy material in 2011. Owing to its precursor selective chemical etching, and unique intrinsic characteristics, the MXene surface properties are further classified into highly chemically active compound, which further produced different surface functional groups i. e., oxygen, fluorine or hydroxyl groups. However, the role of surface functional groups doesn't not only have a significant impact onto its electrochemical and hydrophilic characteristics (i. e., ion adsorption/diffusion), but also imparting a noteworthy effect onto its conductivity, work function, electronic structure and properties. Henceforth, such kind of inherent chemical nature, robust electrochemistry and high hydrophilicity ultimately increasing the MXene application as a most propitious material for overall environment-remediation, electrocatalytic sensors, energy conversion and storage application. Moreover, it is well documented that the role of MXenes in all kinds of research fields is still on a progress stage for their further improvement, which is not sufficiently summarized in literature till now. The present review article is intended to critically discuss the different chemical aptitudes and the diversity of MXenes and its derivates (i. e., hybrid composites) in all aforesaid application with special emphasis onto the improvement of its surface characteristics for the multidimensional application. However, this review article is anticipated to endorse MXenes and its derivates hybrid configuration, which is discussed in detail for emerging environmental decontamination, electrochemical use, and pollutant detection via electrocatalytic sensors, photocatalysis, along with membrane distillation and the adsorption application. Finally, it is expected, that this review article will open up new window for the effective use of MXene in a broad range of environmental remediation, energy conversion and storage application as a novel, robust, multidimensional and more proficient materials.

Recent progress in use of MXene in perovskite solar cells: for interfacial modification, work-function tuning and additive engineering

The use of perovskites in photovoltaic and related industries has achieved tremendous success over the last decade. However, there are still obstacles to overcome in terms of boosting their performance and resolving stability issues for future commercialization. The introduction of a new 2D material of halide perovskites is now the key advancement in boosting the solar energy conversion efficiency. The implication of a new 2D material (MXene) in perovskite solar cells has been initiated since its first report in 2018, showing excellent transparency, electrical conductivity, carrier mobility, superior mechanical strength, and tunable work function. Based on distinctive features at the hetero-interface, halide perovskite and MXene heterostructures (HPs/Mx) have recently exhibited exceptional improvements in both the performance and stability of perovskite solar cells. Furthermore, the wide families of HPs and MXene materials allow playing with the composition and functionalities of HP/Mx interfaces by applying rational designing and alterations. In this review a comprehensive study of implementing MXenes in perovskite solar cells is presented. First, the implementation of MXenes in perovskites as an additive, and then in charge extraction layers (HTL/ETL), is described in detail. It is worth noting that still only Ti₃C₂T_x, Nb₂CT_x,V₂CT_x MXene is being incorporated into perovskite photovoltaics. Finally, the present obstacles in the use of MXenes in PSCS are discussed, along with the future research potential. This review is expected to provide a complete and in-depth description of the current state of research and to open up new opportunities for the study of other MXenes in PSCs.

Magnetic Ti3C2 MXene Nanomaterials for Doxorubicin Adsorption from Aqueous Solutions: Kinetic, Isotherms, and Thermodynamic Studies

In this work, the magnetic Ti₃C₂ MXene functionalized with β-cyclodextrin was prepared and characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometry, and thermogravimetric analysis. The synthesized nanomaterial was used as an adsorbent to adsorb doxorubicin from aqueous solutions, and the experimental parameters that affected the adsorption efficiency were investigated. In addition, the adsorption characteristics including adsorption kinetics, adsorption isotherm, and thermodynamics were researched comprehensively. The adsorption kinetics of doxorubicin followed a pseudo-second-order kinetic model, which indicated that adsorption was the rate-limiting step, and the maximum adsorption capacity was 7.35 μg mg^-1 by shaking for 60 min at pH 7.0. The adsorption isotherm was well described using the Freundlich model, which implied that multilayer adsorption took place over the prepared nanomaterial for doxorubicin adsorption. The negative values of Gibbs free energy change (ΔG ⁰ < 0) demonstrated that doxorubicin adsorption was a spontaneous process. The positive values of entropy change (ΔS ⁰ > 0) implied that doxorubicin adsorption was an increasing random process. Enthalpy change values were positive (ΔH ⁰ > 0) and indicated that the adsorption of doxorubicin was endothermic. The adsorption percentage of doxorubicin remained in the range of 41.05-44.09%, and the relative standard deviation (RSD) based on the adsorption percentage through five replicate adsorption and desorption processes was 2.8%. These results indicated that the magnetic Ti₃C₂ MXene nanomaterials can be an effective adsorbent to adsorb DOX from aqueous solutions.

Effect of Fe(III) Modification on the Phosphorus Removal Behavior of Ce(III) Carbonate Adsorbents

Excessive phosphorus (P) in water is the main reason for eutrophication, which has been a global problem for many years. For the adsorption treatment of phosphorus-containing wastewater, adsorbents are key research topics. In this study, we develop the synthesis of a series of Ce/Fe adsorbents by modifying the commercial cerium carbonate with Fe₂(SO₄)₃. By conducting comprehensive analysis with XRD, FTIR, and SEM, we find that the amorphous granular structure and large chunky structure created by the high and low Fe content, respectively, both had a negative effect on the adsorption capacity of phosphate. Among different adsorbents, Ce/Fe-15/3, with Ce loading of 28.33 wt % and Fe loading of 5.66 wt %, exhibits high P adsorption capacity of 58 mg P/g (in pH = 7, 30 mg P/L solution). It also demonstrates excellent selectivity toward phosphate adsorption in Cl^-, SO₄ ^2-, and NO₃ ^- solution (up to 20 times of the phosphate molarity) and good adsorption stability in acidic environments (pH = 3-6). The adsorption behavior of Ce/Fe-15/3 can be modeled well by the Langmuir model and pseudo-second-order (PSO) model. By conducting the XPS analysis, we conclude that the adsorption mechanism is a combination effect of Ce/PO₄ ^3- and Fe/PO₄ ^3- chemical interactions.

Adsorption of chromium, copper, lead and mercury ions from aqueous solution using bio and nano adsorbents: A review of recent trends in the application of AC, BC, nZVI and MXene

Recent trends in adsorption of Chromium (Cr), Copper (Cu), Lead (Pb) and Mercury (Hg) in wastewater using (i) carbonaceous materials including activated carbon (AC) and biochar (BC), and (ii) nanomaterials including nano zero-valent iron (nZVI) and MXenes have been discussed in this paper. It has been found that adsorption capacity depends largely on the adsorbent modification technique, initial pH of wastewater, dosage of adsorbent, contact time and initial concentration of the pollutants. The pH value ranges for maximum removal of Cr, Cu, Pb and Hg have been reported as 2-4, 5-6, 5-8 and 3-8, respectively. Up to 99% removal of metals has been reported using AC, BC, nZVI and MXene. The mechanism involves the reduction and chemical adsorption of metals. AC and BC have a higher surface area (up to 5000 m²/g) compared to nZVI (up to 500 m²/g) and MXene (up to 67.66 m²/g). However, the higher reactivity and regeneration capacity of nZVI and MXene make them suitable adsorbents. From a practical point of view the application of adsorbents for real effluents, cost analysis, regeneration capability and reuse of heavy metals are some aspects that need attention in future studies. The removal efficiencies of AC and BC are comparable to the nZVI and MXene. The cost analysis may be an attractive aspect to decide the future application of these adsorbents at large scale.

The physio-chemical properties and applications of 2D nanomaterials in agricultural and environmental sustainability

Global hunger and nutritional deficiency demand the advancement of existing and conventional approaches to food production. The application of nanoenabled strategies in agriculture has opened up new avenues for enhancing crop yield and productivity. Recently, two-dimensional (2D) nanomaterials (NMs) have manifested new possibilities for increasing food production and nutrition. Graphene nanosheets, the 2D form of graphene has been exemplary in enhancing the loading capacity of agro-active ingredients, their target-specific delivery, bioavailability, and controlled release with slow degradation, resulting in the increased shelf-life/active time of the agro-active components. Also, the development of novel formulations/composites of MXenes and Transition Metal Dichalcogenides (TMDs) can foster plant growth, metabolism, crop production, protection and improvement of soil quality. Additionally, the 2D NM-based biosensors can monitor the nutrient levels and other parameters affecting agronomical traits in plants. This review provides an insight into the details of 2D NM synthesis and functionalization methods. Notably, the review highlights the broad-range of 2D NM applications and their suitability in the development of nanotechnology-based agriformulations. The 2D NM-based derivatives have shown immense potential in enhancing the pedologic parameters, crop productivity, pest-protection and nutritional value. Thus, assisting in achieving food and environmental sustainability goals.

Evaluation of MXene as an adsorbent in dispersive solid phase extraction of several pesticides from fresh fruit juices prior to their determination by HPLC-MS/MS

This study aimed to introduce a dispersive solid phase extraction method based on MXene nanoparticles as a novel sorbent for the simultaneous extraction and determination of twelve pesticides from fresh fruit juices. In the following, a high performance liquid chromatography-tandem mass spectrometry was used for their determination in the samples. In this method, two-dimensional nanomaterials of Ti₂AlC were exfoliated in an acidic solution and then they were added into the sample solution. To enhance the sample solution and sorbent contact area, the mixture was vortexed for a few minutes. Then the adsorbed analytes onto the sorbent were eluted using acetone and then analyzed. Under optimal conditions, the calibration curves of the method were linear within the range of 3.0-1000 µg L^-1. The limits of detection, intra- and inter-day relative standard deviations, and extraction recoveries were in the ranges of 0.08-1.0 µg L^-1, 2.5-4.2%, 2.5-5.5%, and 69-75%, respectively. Performing the method verified the presence of some of the analytes in several samples. This method can help to monitor pesticides in juice samples as well as to improve our understanding the safety of foods.

Facile hydrothermal synthesis of MXene@antimony nanoneedle composites for toxic pollutants removal

A new 2D transition metal carbides family noted that MXene with antimony (Sb) nano-needles composites have demonstrated potential applications for photocatalytic dye degradations applications. Single-step synthesis of novel structures two/one-dimensional MXene@antimony nanoneedle (MX@Sb-H) nanocomposite-based photocatalysts is produced employing hydrothermal technique. The preparations and characterizations were compared with hand mixture preparations of pure TiO₂@Sb and MXene (MX@Sb-M). The crystallographic structure was identified employing X-ray diffraction (XRD) studies and main sharp XRD peaks were observed with diffraction angle with orientations planes for all three samples TiO₂@Sb, MX@Sb-M and MX@Sb-H. The micro-Raman spectroscopy explored key vibration modes centered at 151.72 and 637.52 cm^-1 corresponding to Ti and Sb hybrid composites respectively. Fourier transform infrared spectroscopy (FTIR) spectrum of functional group peaks at 609.16 and 868.80 cm^-1 revealed Ti-OH/Sb-O-C stretching. The morphological investigations of horizontal growth for "Sb" nanoneedle on MXene nanosheets were explored by scanning electron microscopy (SEM). The degradation efficiency was calculated. The efficiency calculated were 27%, 38%, 68% and 82% for MB solution, TiO₂@Sb added MB, MX-Sb-M added MB and MX-Sb-H added MB solution and the efficiency were 32%, 38%, 50% and 65% for pure RhB solution, TiO₂@Sb added RhB, MX-Sb-M added RhB and MX-Sb-H added RhB solution. The photocatalytic activity of TiO₂@Sb, MX@Sb-M and MX@Sb-H was examined. Among these MX@Sb-H nanocomposite was demonstrated the high photocatalytic action in expressions of rate stability of photocatalytic dye degradations.

An overview of MXene-Based nanomaterials and their potential applications towards hazardous pollutant adsorption

With the massive development of industrialization, multiple ecological contaminants in gaseous, liquid, and solid forms are vented into habitats, which is currently at the forefront of worldwide attention. Because of the possible damage to public health and eco-diversity, high-efficiency clearance of these environmental contaminants is a serious concern. Improved nanomaterials (NMs) could perform a significant part in the exclusion of contaminants from the atmosphere. MXenes, a class of two-dimensional (2D) compounds that have got tremendous consideration from researchers for a broad array of applications in a variety of industries and are viewed as a potential route for innovative solutions to identify and prevent a variety of obstreperous hazardous pollutants from environmental compartments due to their exceptional innate physicochemical and mechanical features, including high specific surface area, physiological interoperability, sturdy electrodynamics, and elevated wettability. This paper discusses the recent progress in MXene-based nanomaterials' applications such as environmental remediation, with a focus on their adsorption-reduction characteristics. The removal of heavy metals, dyes, and radionuclides by MXenes and MXene-based nanomaterials is depicted in detail, with the adsorption mechanism and regeneration potential highlighted. Finally, suggestions for future research are provided to ensure that MXenes and MXene-based nanomaterials are synthesized and applied more effectively.

Coupled electrochemiluminescent and resonance energy transfer determination of microRNA-141 using functionalized Mxene composite

The electrochemiluminescence and resonance energy transfer (ECL-RET) method was adopted to detect miRNAs, in which the two-dimensional Ti₃C₂ Mxenes with high surface area modified with CdS:W nanocrystals (CdS:W NCs) were used as ECL signal emitter. Mxenes with a specific surface area of 5.2755 m²/g carried more emitters and promote ECL intensity. As an energy acceptor, BiOCl nanosheets (BiOCl NSs) have a wide UV-Vis absorption peak in the range 250 nm-700 nm, including the emission band of CdS:W NCs with 520 nm emission wavelength. Hence, BiOCl NSs are covalently bound to hairpin DNA 2 by amide bond to quench the ECL signal of CdS:W NCs. In the presence of miRNA-141, the hairpin DNA 1 modified on the GCE was unfold and then paired with hairpin DNA 2 to release miRNA-141 and quench the signal of the ECL biosensor. Then, the concentration signal of miRNA-141 was amplified by catalytic hairpin assembly. The novel specific biosensor demonstrated a satisfactory linear relationship with miRNA-141 in the range 0.6 pM to 4000 pM; the detection limit was as low as 0.26 pM (3 s/m) under the potential of 0 ~ -1.3 V and showed outstanding RSD of 1.19%. The findings of the present work with high accuracy and sensitivity will be of positive significance for the clinical diagnosis of miRNA in the future work. The construction process of the biosensor and electrochemiluminescence mechanism.

Well-defined bimetal oxides derived from Prussian blue analogues with regulable active sites for phosphate removal

Two well-defined CoFe bimetal oxides are prepared from Prussian blue analogues (PBAs) as precursors with designable structures, which are further explored for phosphate removal. A speed-controlled coordination strategy is used to fabricate two CoFe PBA microcrystals with different morphologies, then two regular CoFe oxides are obtained via an intermediate-temperature calcination. CoFeS, a slow-speed coordination product with truncated microcube structure, contains less coordinated water and Fe³⁺ in its framework, but can create more mesopores and Fe³⁺ in its oxidative product of CoFeST300. CoFeST300 has been demonstrated to have higher adsorption capacity and affinity for phosphate adsorption compared to that of the fast-speed coordination product, due to its more Fe³⁺ as effective adsorption sites via ligand exchange. Besides, the inner-sphere complexation mechanism makes CoFeST300 high selectivity for phosphate removal compared to other co-existing anions. The application performance of CoFeST300 is examined by multiple continuous treatment of actual sewage, and the result of all effluent concentrations below 0.5 mg P/L verifies a promising potential of the fabricated adsorbent for phosphorus removal. Thus, design or regulation of the precursors is an efficiency method to fabricate an ideal metal oxide for phosphate adsorption.

Phosphate removal from actual wastewater via La(OH)3-C3N4 adsorption: Performance, mechanisms and applicability

In this study, La(OH)₃ nanoparticles were immobilized on C₃N₄ to effectively restrict their aggregation and subsequently enhance the La utilization efficiency to promote phosphate adsorption. The prepared La(OH)₃-C₃N₄ nanocomposite was characterized by SEM, XRD, FTIR, XPS, BET and Zeta potential analysis. Batch and continuously-fed (fixed-bed column) experiments to assess the adsorption performance of La(OH)₃-C₃N₄ showed that the composite exhibits superior utilization efficiency, resulting to relatively quick adsorption with a short equilibrium time of 30 min. The theoretical maximum P adsorption capacity reached the 148.35 mg·g^-1, efficiency that remained unaffected by the anions and HA present. The adsorption mechanism showed stability in a wide pH range (4.0-11.0) and is considered effective even after extensive use (five-cycles). The dynamics of the adsorption capacity and the half-penetration time values were estimated by 'Thomas' and 'Yoon-Nelson' models showed that are better represented from the experimental values obtained from the fixed-bed column trial. The adsorption mechanisms were attributed to surface precipitation, electrostatic attraction, and inner-sphere complexation via ligand exchange. Furthermore, La(OH)₃-C₃N₄ demonstrated high efficiency in scavenging phosphate from both diluted and concentrated wastewater (natural pond and swine wastewater respectively). The above confirm that La(OH)₃-C₃N₄ is a promising composite material for phosphate management in aqueous environments.

Molecularly imprinted ratiometric electrochemical sensor based on carbon nanotubes/cuprous oxide nanoparticles/titanium carbide MXene composite for diethylstilbestrol detection

Conventional molecularly imprinted polymers (MIP)-based electrochemical sensors are generally susceptible to the changes of personal operation, electrode surface, and solution conditions. Herein, a ratiometric strategy was employed through introducing Cu₂O nanoparticles (NPs) as inner reference probe to realize the reliable detection of diethylstilbestrol (DES). MIP film was prepared by electropolymerization of 1H-pyrrole-3-carboxylicacid in the presence of DES on carbon nanotubes/cuprous oxide/titanium carbide (CNT/Cu₂O NPs/Ti₃C₂T_x) modified electrodes. The Ti₃C₂T_x with accordion-like structure not only possessed good electrical conductivity, but also facilitated the immobilization of Cu₂O NPs, which contributed to stabilizing the signal. CNT was introduced to further improve the sensitivity of the sensor. Under optimum conditions, the MIP/CNT/Cu₂O NPs/Ti₃C₂T_x electrochemical sensors showed a broad linear response range of 0.01 to 70 μM, and a low detection limit of 6 nM (S/N = 3). Moreover, the sensor was applied to detect DES in real samples including lake water, milk, and pork, and the recoveries for spiked standard were 88-112%. Thus, this work provides a new way for reliable DES detection.

Heterogeneous Structure Regulated by Selection Pressure on Bacterial Adhesion Optimized the Viability Stratification Structure of Electroactive Biofilms

As the core of microbial fuel cells (MFCs), the components and structure of electroactive biofilms (EABs) are essential for MFC performance. Bacterial adhesion plays a vital role in shaping the structure of EABs, but the effect of bacterial adhesion under selection pressure on EABs has not been systematically studied. Here, the response of the composition, structure, and electrochemical performance of EABs to the selective adhesion pressure due to the selective coordination of Fe(III) and Co(II) with thiol and the different affinities for bacteria on hybrid electrodes (Fe₁Co, Fe₄Co, and Fe₁₀Co) were comprehensively investigated. Compared with carbon cloth (CC), the appropriate selective adhesion pressure of Fe₄Co activated the dead inner core of EABs and optimized their viability stratification structure. Both the total viability and the viability of the inner core layer in the Fe₄Co EAB (0.67, 0.70 ± 0.01) were higher than those of the CC (0.46, 0.54 ± 0.01), Fe₁Co (0.50, 0.48 ± 0.03), and Fe₁₀Co (0.51, 0.51 ± 0.03). Moreover, a higher proportion of proteins was detected in the Fe₄Co EAB, enhancing the redox activity of extracellular polymeric substances. Fe₄Co enriched Geobacter and stimulated microbial metabolism. Electrochemical analysis revealed that the Fe₄Co EAB was the most electroactive EAB, with a maximum power density of 2032.4 mW m^-2, which was 1.7, 1.3, and 1.1 times that of the CC (1202.6 mW m^-2), Fe₁Co (1610.3 mW m^-2), and Fe₁₀Co (1824.4 mW m^-2) EABs, respectively. Our findings confirmed that highly active EABs could be formed by imposing selection pressure on bacterial adhesion.

Removal of phosphate from water by paper mill sludge biochar

Biochar modification by metals and metal oxides is considered a practical approach for enhancing the adsorption capacity of anionic compounds such as phosphate (P). This study obtained paper mill sludge (PMS) biochar (PMSB) via a one-step process by pyrolyzing PMS waste containing ferric salt to remove anionic P from water. The ferric salt in the sludge was transformed into ferric oxide and zero-valent-iron (Fe⁰) in N₂ atmosphere at pyrolysis temperatures ranging from 300 to 800 °C. The maximum adsorption (Q_m) of the PMSBs for P ranged from 9.75 to 25.19 mg P/g. Adsorption is a spontaneous and endothermic process, which implies chemisorption. PMSB obtained at 800 °C (PMSB800) exhibited the best performance for P removal. Fe⁰ in PMSB800 plays a vital role in P removal via adsorption and coprecipitation, such as forming the ≡Fe-O-P ternary complex. Furthermore, the possible chemical precipitation of P by CaO decomposed from calcite (CaCO₃; an additive of paper production that remains in PMS) may also contribute to the removal of P by PMSB800. Moreover, PMSBs can be easily separated magnetically from water after application and adsorption. This study achieved a waste-to-wealth strategy by turning waste PMS into a metal/metal oxide-embedded biochar with excellent P removal capability and simple magnetic separation properties via a one-step pyrolysis process.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.

Enhanced pseudocapacitive energy storage and thermal stability of Sn2+ ion-intercalated molybdenum titanium carbide (Mo2TiC2) MXene

Electrochemical energy-storage (EES) devices are a major part of energy-storage systems for industrial and domestic applications.

Hierarchical Ti3 C2 Tx MXene/Carbon Nanotubes Hollow Microsphere with Confined Magnetic Nanospheres for Broadband Microwave Absorption

Hierarchical hollow structure with unique interfacial properties holds great potential for microwave absorption (MA). Ti₃ C₂ T_x MXene has been a hot topic due to rich interface structure, abundant defects, and functional groups. However, its overhigh permittivity and poor aggregation-resistance limit the further application. Herein, a hierarchical MXene-based hollow microsphere is prepared via a facile spray drying strategy. Within the microsphere, few-layered MXene nanosheets are separated by dispersed carbon nanotubes (CNTs), exposing abundant dielectric polarization interfaces. Besides, numerous magnetic Fe₃ O₄ nanospheres are uniformly dispersed and confined within nano-cavities between 1D network and 2D framework. Such a novel structure simultaneously promotes interfacial polarization by ternary MXene/CNTs/Fe₃ O₄ interfaces, enhances magnetic loss by microscale and nanoscale coupling network, enlarges conduction loss by MXene/CNTs dual-network, and optimizes impedance matching by hierarchical porous structure. Therefore, Fe₃ O₄ @Ti₃ C₂ T_x /CNTs composite achieves excellent MA property with a maximum reflection loss of -40.1 dB and an effective bandwidth of 5.8 GHz at the thickness of only 2 mm. This work demonstrates a feasible hierarchical structure design strategy for multi-dimension MXene composite to realize the high-efficiency MA performance.

l-Cysteine-Terminated Triangular Silver Nanoplates/MXene Nanosheets are Used as Electrochemical Biosensors for Efficiently Detecting 5-Hydroxytryptamine

5-Hydroxytryptamine (5-HT) is an important neurotransmitter, and its content in the human body is of great significance to human health. In this study, an l-cysteine-terminated triangular silver nanoplate loaded on a MXene (two-dimensional transition metal carbide or nitride) (Tri-AgNP/l-Cys/MXene) electrochemical sensor was used to detect 5-HT. As an electrically active amino acid with a sulfhydryl group, l-cysteine (l-Cys) forms a more stable Ag-S bond with silver nanoparticles, which can selectively substitute trisodium citrate (TSC) in TSC-capped triangular silver nanoplates (Tri-Ag-NP/TSC). Due to the good conductivity, biocompatibility, and large surface area, MXenes provide a good platform for loading Tri-AgNP/l-Cys. Under optimized conditions, the concentration range for detecting 5-HT with the sensor is 0.5-150 μM, and the limit of detection (LOD) is 0.08 μM (S/N = 3). For detecting 5-HT in actual serum samples, the sensor also showed a good recovery rate (95.38-102.3%), and the relative standard deviation was 2.2-3.4%.

Hierarchical MXene/transition metal chalcogenide heterostructures for electrochemical energy storage and conversion

MXenes have gained rapidly increasing attention owing to their two-dimensional (2D) layered structures and unique mechanical and physicochemical properties. However, MXenes have some intrinsic limitations (e.g., the restacking tendency of the 2D structure) that hinder their practical applications. Transition metal chalcogenide (TMC) materials such as SnS, NiS, MoS₂, FeS₂, and NiSe₂ have attracted much interest for energy storage and conversion by virture of their earth-abundance, low costs, moderate overpotentials, and unique layered structures. Nonetheless, the intrinsic poor electronic conductivity and huge volume change of TMC materials during the alkali metal-ion intercalation/deintercalation process cause fast capacity fading and poor-rate and poor-cycling performances. Constructing heterostructures based on metallic conductive MXenes and highly electrochemically active TMCs is a promising and effective strategy to solve these problems and enhance the electrochemical performances. This review highlights and discusses the recent research development of MXenes and hierarchical MXene/TMC heterostructures, with a focus on the synthesis strategies, surface/heterointerface engineering, and potential applications for lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, supercapacitors, electrocatalysis, and photocatalysis. The critical challenges and perspectives of the future development of MXenes and hierarchical MXene/TMC heterostructures for electrochemical energy storage and conversion are forecasted.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

New insight into the bioinspired sub-10 nm Sn(HPO4)2 confinement for efficient heavy metal remediation in wastewater

Heavy metal pollution poses a severe threat to the water environment. Engineering sub-10 nm active functional materials is an important approach to address the problems, and nanocomposites, developed in recent years by pore confinement always present weaken diffusion and low utilization of nanoparticles. In this study, we successfully prepared the polydopamine confined high-density sub-10 nm Sn(HPO₄)₂ coating for toxic lead(II) removal and its unique external coating structure and superior active sub-10 nm size achieved remarkable performances for heavy metal remediation. The hybrid sub-10 nm coating exhibits an extended acidic environment application (pH = 2.0-7.0) as well as significant selectivity with a superior K_d values (9.4 × 10⁴ mL/g, which is 450 times greater than that of commercial sulfonated polystyrene. Ultrafast filtrations by vacuum further validate its superior sequestration (near to 100%) to Pb and Cd ions at different concentrations (10-100 mg/L) for 2 mins. The real column application further demonstrates the remarkable capacity of 11800 kg/kg sorbents, the trace effluents with three orders (∼10³) reduction to below 1 ppb (> 99.9% Pb removal) and efficient stability for several cycles. The effective performances are mainly driven by the PDA motivated external nanoparticles arrangement and strong inner-sphere complexation by small size of Sn(HPO₄)₂. These results set a new benchmark for removing toxic metals and the proposed approach (engineering sub-10 nm coating design) is unique for heavy metal removal.

A Brief Review of the Role of 2D Mxene Nanosheets toward Solar Cells Efficiency Improvement

This article discusses the application of two-dimensional metal MXenes in solar cells (SCs), which has attracted a lot of interest due to their outstanding transparency, metallic electrical conductivity, and mechanical characteristics. In addition, some application examples of MXenes as an electrode, additive, and electron/hole transport layer in perovskite solar cells are described individually, with essential research issues highlighted. Firstly, it is imperative to comprehend the conversion efficiency of solar cells and the difficulties of effectively incorporating metal MXenes into the building blocks of solar cells to improve stability and operational performance. Based on the analysis of new articles, several ideas have been generated to advance the exploration of the potential of MXene in SCs. In addition, research into other relevant MXene suitable in perovskite solar cells (PSCs) is required to enhance the relevant work. Therefore, we identify new perspectives to achieve solar cell power conversion efficiency with an excellent quality-cost ratio.

A decade of exploring MXenes as aquatic cleaners: Covering a broad range of contaminants, current challenges and future trends

Clean water, the elixir of life, is of tremendous importance in achieving environmental sustainability and the balanced functioning of our ecosystem. Coupled with population growth, several anthropogenic activities and environmental catastrophes have together contributed to an alarming increase in the concentration of toxic pollutants in water bodies. Diversified physiochemical conditions of water matrices, ranging from mining drainage to seawater, is the critical challenge in designing adsorbents. MXenes, a new class of 2D layered materials, are transition metal nitrides, carbides, carbonitrides or borides formed through selective etching process. MXenes are known to have high surface area and activity with biological compatibility and chemical stability and therefore are promising adsorbents and have been explored for a broad range of contaminants. This review starts with a brief about environmental contaminants followed by synthesis and modifications of MXenes. It then revolves around their so far explored adsorbing and degradation properties for different contaminants ranging from toxic metals, inorganic ions, and radionuclides to various organic pollutants, including dyes, pharmaceuticals, aromatic hydrocarbons, and pesticides, etc. Finally, we have discussed associated toxicity, secondary contamination, future trends, and challenges in ascertaining scalability and wide-range applicability of MXenes in natural environmental conditions to make them a warrior of water sustainability.