A Facile Approach to Construct Novel Polyesters as Soft Midblock for Thermoplastic Elastomers

The development of innovative synthetic strategies to create functional polycaprolactones is highly demanded for advanced material applications. In this contribution, we reported a facile synthetic strategy to prepare a class of CL-based monomers (R-TO) derived from epoxides. They readily polymerize via well-controlled ring-opening polymerization (ROP) to afford a series of polyesters P(R-TO) with high molecular weight (Mn up to 350 kDa). Sequential addition copolymerization of MTO and L-lactide (L-LA) allowed to access of a series of ABA triblock copolymers with composition-dependent mechanical properties. Notably, P(L-LA)100-b-P(MTO)500-b-P(L-LA)100 containing the amorphous P(MTO) segment as a soft midblock and crystalline P(L-LA) domain as hard end block behaved as an excellent thermoplastic elastomer (TPE) with high elongation at break (1438±204 %), tensile strength (23.5±1.7 MPa), and outstanding elastic recovery (>88 %).

Cutinase-Catalyzed Polyester-Polyurethane Degradation: Elucidation of the Hydrolysis Mechanism

Polyurethanes (PU) are one of the most-used classes of synthetic polymers in Europe, having a considerable impact on the plastic waste management in the European Union. Therefore, they represent a major challenge for the recycling industry, which requires environmentally friendly strategies to be able to re-utilize their monomers without applying hazardous and polluting substances in the process. In this work, enzymatic hydrolysis of a polyurethane-polyester (PU-PE) copolymer using Humicola insolens cutinase (HiC) has been investigated in order to achieve decomposition at milder conditions and avoiding harsh chemicals. PU-PE films have been incubated with the enzyme at 50 °C for 168 h, and hydrolysis has been followed throughout the incubation. HiC effectively hydrolysed the polymer, reducing the number average molecular weight (M_n) and the weight average molecular weight (M_w) by 84% and 42%, respectively, as shown by gel permeation chromatography (GPC), while scanning electron microscopy showed cracks at the surface of the PU-PE films as a result of enzymatic surface erosion. Furthermore, Fourier Transform Infrared (FTIR) analysis showed a reduction in the peaks at 1725 cm⁻¹, 1164 cm⁻¹ and 1139 cm⁻¹, indicating that the enzyme preferentially hydrolysed ester bonds, as also supported by the nuclear magnetic resonance spectroscopy (NMR) results. Liquid chromatography time-of-flight/mass spectrometry (LC-MS-Tof) analysis revealed the presence in the incubation supernatant of all of the monomeric constituents of the polymer, thus suggesting that the enzyme was able to hydrolyse both the ester and the urethane bonds of the polymer.

Polyurethanes based on lignin-derived metabolic intermediate with strong adhesion to metals

Polyurethanes based on lignin-derived 2-pyrone-4,6-dicarboxylic acid (PDC) were successfully synthesized in one-pot, and their thermal, mechanical, and adhesive properties were investigated.

Heterogeneous Double Metal Cyanide Catalyzed Synthesis of Poly(ε-caprolactone) Polyols for the Preparation of Thermoplastic Elastomers

A series of polycaprolactones (PCLs) with molecular weights of 950–10,100 g mol−1 and Ð of 1.10–1.87 have been synthesized via one-pot, solvent-free ring-opening polymerization (ROP) of ε-caprolactone (CL) using a heterogeneous double metal cyanide (DMC) catalyst. Various initiators, such as polypropylene glycol, ethylene glycol, propylene glycol, glycerol, and sorbitol, are employed to tune the number of hydroxyl end groups and properties of the resultant PCLs. Kinetic studies indicate that the DMC-catalyzed ROP of CL proceeds via a similar mechanism with the coordination polymerization. Branched PCLs copolymers are also synthesized via the DMC-catalyzed copolymerization of CL with glycidol. The α,ω-hydroxyl functionalized PCLs were successfully used as telechelic polymers to produce thermoplastic poly(ester-ester) and poly(ester-urethane) elastomers with well-balanced stress and strain properties.

Engineered ε-decalactone lipomers bypass the liver to selectively in vivo deliver mRNA to the lungs without targeting ligands

RNA drugs hold real potential for tackling devastating diseases that are currently resistant to small molecule drugs or monoclonal antibodies. However, since these drugs are unstable in vivo and unable to pass through cellular membranes their clinical realization is limited by their successful delivery to target sites. Herein we report on the design of a combinatorial library of polyester lipomers based on the renewable monomer, ε-decalactone (ε-DL), via organocatalytic ring-opening polymerization for mRNA delivery. The ε-DL lipomers showed a surprisingly efficient ability to target the lungs upon intravenous administration. Interestingly, most of the lipomers achieved functional EGFP expression in the lungs, while minimally transfecting hepatocytes and splenic cells. This simple approach for the design of biodegradable materials has the potential for the clinical translation of genetic medicines for the treatment of lung diseases.

Crystallization-induced mechanofluorescence for visualization of polymer crystallization

The growth of lamellar crystals has been studied in particular for spherulites in polymeric materials. Even though such spherulitic structures and their growth are of crucial importance for the mechanical and optical properties of the resulting polymeric materials, several issues regarding the residual stress remain unresolved in the wider context of crystal growth. To gain further insight into micro-mechanical forces during the crystallization process of lamellar crystals in polymeric materials, herein, we introduce tetraarylsuccinonitrile (TASN), which generates relatively stable radicals with yellow fluorescence upon homolytic cleavage at the central C-C bond in response to mechanical stress, into crystalline polymers. The obtained crystalline polymers with TASN at the center of the polymer chain allow not only to visualize the stress arising from micro-mechanical forces during polymer crystallization via fluorescence microscopy but also to evaluate the micro-mechanical forces upon growing polymer lamellar crystals by electron paramagnetic resonance, which is able to detect the radicals generated during polymer crystallization.

1,3-Dioxolan-4-Ones as Promising Monomers for Aliphatic Polyesters: Metal-Free, in Bulk Preparation of PLA

The first example of solvent-free, organocatalyzed, polymerization of 1,3-dioxolan-4-ones, used as easily accessible monomers for the synthesis of polylactic acid (PLA), is described here. An optimization of reaction conditions was carried out, with p-toluensulfonic acid emerging as the most efficient Brønsted acid catalyst. The reactivity of the monomers in the tested conditions was studied following the monomer conversion by 1H NMR and the molecular weight growth by SEC analysis. A double activation polymerization mechanism was proposed, pointing out the key role of the acid catalyst. The formation of acetal bridges was demonstrated, to different extents depending on the nature of the aldehyde or ketone employed for lactic acid protection. The polymer shows complete retention of stereochemistry, as well as good thermal properties and good polydispersity, albeit modest molecular weight.

Alicyclic polyesters from a bicyclic 1,3-dioxane-4-one

Ring-opening polymerisation of cyclopentyl-decorated dioxaneone rings accesses fully alicyclic polyesters through elimination of formaldehyde.

Monodisperse oligo(δ-valerolactones) and oligo(ε-caprolactones) with docosyl (C22) end-groups

Two different families of monodisperse oligoesters with α-hydroxyl-ω-docosyl (C₂₂) terminal groups [oligo(δ-valerolactone) and oligo(ϵ-caprolactone)] were isolated by flash column chromatography (FCC).

Turning natural δ-lactones to thermodynamically stable polymers with triggered recyclability

Extending the use of natural δ-lactones in circular materials via a synthetic strategy yielding thermodynamically stable polyesters with triggered recyclability.

Heterolepic β-Ketoiminate Zinc Phenoxide Complexes as Efficient Catalysts for the Ring Opening Polymerization of Lactide

Zinc phenoxide complexes L1ZnOAr 1-4 (L1=Me2NC2H4NC(Me)CHC(Me)O) and L2ZnOAr 5-8 (L2=Me2NC3H6NC(Me)CHC(Me)O) with donor-functionalized β-ketoiminate ligands (L1/2) and OAr substituents (Ar=Ph 1, 5; 2,6-Me2-C6H3 2, 6; 3,5-Me2-C6H3 3, 7; 4-Bu-C6H4 4, 8) with tuneable electronic and steric properties were synthesized and characterized. 1-8 adopt binuclear structures in the solid state except for 5, while they are monomeric in CDCl3 solution. 1-8 are active catalysts for the ring opening polymerization (ROP) of lactide (LA) in CH2Cl2 at ambient temperature and the catalytic activity is controlled by the electronic and steric properties of the OAr substituent, yielding polymers with high average molecular weight (M n) and moderately controlled molecular weight distribution (MWDs). 1 and 5 showed a living polymerization character and kinetic studies on the ROP of L-LA with 1 and 5 proved first order dependencies on the monomer concentration. Homonuclear decoupled 1H-NMR analyses of polylactic acid (PLA) formed with rac-LA proved isotactic enrichment of the PLA microstructure.

Hyper-Cross-Linked Polymer on the Hollow Conjugated Microporous Polymer Platform: A Heterogeneous Catalytic System for Poly(caprolactone) Synthesis

This work shows that the shape-controlled microporous organic polymer (MOP) can be utilized for the morphological engineering of another class of MOP materials. The morphology of a hyper-cross-linked polymer (HCP) was successfully engineered on the hollow conjugated microporous polymer (CMP). Through the postsynthetic modification of HCP bearing BINOLs (HCP-B) on the hollow CMP-like material (H-CMPL), the HCP bearing BINOL phosphoric acid (HCP-BP) was engineered on the H-CMPL platform. The resultant H-CMPL@HCP-BP showed good catalytic performance as a heterogeneous catalytic system and excellent recyclability in the ring-opening polymerization of ε-caprolactones to poly(caprolactone).

Porous Polystyrene Monoliths Prepared from in Situ Simultaneous Interpenetrating Polymer Networks: Modulation of Morphology by Polymerization Kinetics

Semi-interpenetrating polymer networks (semi-IPNs) were prepared by in situ simultaneous orthogonal polymerizations, where the linear poly(ε-caprolactone) (PCL) was synthesized by ring-opening polymerization of ε-caprolactone and the poly(styrene-co-divinylbenzene) (PS) network was formed by free-radical polymerization of styrene/divinylbenzene. Semi-IPNs were used as the precursors for the preparation of porous PS monoliths. To this end, the PCL domains were selectively removed by hydrolysis under basic conditions. By changing the amount of organocatalyst used for the ring-opening polymerization of ε-caprolactone, the relative polymerization kinetics of both monomers was varied, which has a pronounced effect on the morphology of thus-obtained PS frameworks.

Microphase separation of carbohydrate-based star-block copolymers with sub-10 nm periodicity

Star-block copolymers consisting of polycaprolactone and maltotriose segments with three, four, and six arms were synthesized to achieve sub-10 nm microphase-separated structures.

Organocatalyzed ring-opening copolymerization of α-bromo-γ-butyrolactone with ε-caprolactone for the synthesis of functional aliphatic polyesters - pre-polymers for graft copolymerization

Diphenyl phosphate (DPP) was exploited as an organocatalyst to synthesize copolymers by ring-opening polymerization with α-bromo-γ-butyrolactone (αBrγBL) and ε-caprolactone (εCL) as monomers and polyethylene glycol (PEG) as initiator. The conversion rates of monomers and molecular weights of copolymers synthesized under different conditions were determined by ¹H-NMR. The ¹H-NMR results showed that the copolymers of αBrγBL and εCL initiated by PEG (PEGCB) were successfully synthesized and the conversions of εCL were relatively high (＞70%), while the conversions of αBrγBL were relatively low (＜26%). The highest molar ratio of αBrγBL to εCL units in these copolymers is 0.17, when the copolymerization was carried out at 100℃ for 17h.

The bromine atoms hanged on the chain of the copolymers PEGCB provide a good opportunity to construct graft copolymers via atom transfer radical polymerization (ATRP). The subsequent grafting of 2-(dimethylamino)ethyl methacrylate (DMAEMA) was conducted by using PEGCB3 as macroinitiator, CuBr/N,N’,N’,N”,N”- pentamethyldiethylenetriamine (PMDETA) as catalysts and toluene/anisole as solvents via ATRP. According to the analysis of ¹H-NMR, the grafting efficiency, grafting ratio and grafting frequency were 22.4%, 160.7% and 1133.8, respectively.

Metallic organophosphate catalyzed bulk ring-opening polymerization

Metallic organophosphates have catalyzed the bulk ring-opening polymerization of cyclic esters and cyclic carbonates through a bifunctional mode.

Ring-opening polymerization of trimethylene carbonate to poly(trimethylene carbonate) diol over a heterogeneous high-temperature calcined CeO2 catalyst

CeO₂ calcined at 1273 K was an effective reusable heterogeneous catalyst for the synthesis of poly(trimethylene carbonate) diol by ring-opening polymerization of trimethylene carbonate under neat conditions without any additives.

Thermodynamic Presynthetic Considerations for Ring-Opening Polymerization

The need for polymers for high-end applications, coupled with the desire to mimic nature's macromolecular machinery fuels the development of innovative synthetic strategies every year. The recently acquired macromolecular-synthetic tools increase the precision and enable the synthesis of polymers with high control and low dispersity. However, regardless of the specificity, the polymerization behavior is highly dependent on the monomeric structure. This is particularly true for the ring-opening polymerization of lactones, in which the ring size and degree of substitution highly influence the polymer formation properties. In other words, there are two important factors to contemplate when considering the particular polymerization behavior of a specific monomer: catalytic specificity and thermodynamic equilibrium behavior. This perspective focuses on the latter and undertakes a holistic approach among the different lactones with regard to the equilibrium thermodynamic polymerization behavior and its relation to polymer synthesis. This is summarized in a monomeric overview diagram that acts as a presynthetic directional cursor for synthesizing highly specific macromolecules; the means by which monomer equilibrium conversion relates to starting temperature, concentration, ring size, degree of substitution, and its implications for polymerization behavior are discussed. These discussions emphasize the importance of considering not only the catalytic system but also the monomer size and structure relations to thermodynamic equilibrium behavior. The thermodynamic equilibrium behavior relation with a monomer structure offers an additional layer of complexity to our molecular toolbox and, if it is harnessed accordingly, enables a powerful route to both monomer formation and intentional macromolecular design.

Polymerization of trimethylene carbonates using organic phosphoric acids

1,1′-Binaphthyl-2,2′-diyl hydrogen phosphate (BNPH) catalyzed a controlled/living ROP of TMC through a bifunctional activation mechanism, leading to end-functionalized PTMC and block polymers.

Synthesis, characterization, and catalytic activity of sodium ketminiate complexes toward the ring-opening polymerization of l-lactide

Na complexes bearing ketiminate ligands revealed the greater catalytic activity and polymer controllability than that of Na complexes bearing Schiff base ligands.