Polymerized-Small-Molecule Acceptors Featuring Siloxane-Terminated Side Chains for Mechanically Robust All-Polymer Solar Cells

Flexible and stretchable organic solar cells (OSCs) show great promise in wearable and stretchable electronic applications. However, current high-performance OSCs consisting of polymer donors (PDs) and small-molecule acceptors (SMAs) face significant challenges in achieving both high power conversion efficiency (PCE) and excellent stretch-ability. In this study, we synthesized a new polymerized-small-molecule acceptor (P-SMA) PY-SiO featuring siloxane-terminated side chains and compared its photovoltaic and mechanical performance to that of the reference PY-EH with ethylhexyl-terminated side chains. We found that the incorporation of siloxane-terminated side chains in PY-SiO enhanced the molecular aggregation and charge transport, leading to an optimized film morphology. The resultant of all-polymer solar cells (all-PSCs) based on PBDB-T/PY-SiO showed a higher PCE of 12.04% than the PY-EH-based one (10.85%). Furthermore, the siloxane-terminated side chains also increased the interchain distance and provided a larger free volume for chain rotation and reconfiguration, resulting in a higher film crack-onset strain (COS: 18.32% for PBDB-T/PY-SiO vs 11.15% for PBDB-T/PY-EH). Additionally, the PY-SiO-based stretchable all-PSCs exhibited an impressive PCE of 9.8% and retained >70% of its original PCE even under a substantial 20% strain, exceeding the performance of the PY-EH-based stretchable all-PSCs. Our result suggests the great potential of the siloxane-terminated side chain for achieving high-performance and stretchable OSCs.

Enhanced sub-1 eV detection in organic photodetectors through tuning polymer energetics and microstructure

One of the key challenges facing organic photodiodes (OPDs) is increasing the detection into the infrared region. Organic semiconductor polymers provide a platform for tuning the bandgap and optoelectronic response to go beyond the traditional 1000-nanometer benchmark. In this work, we present a near-infrared (NIR) polymer with absorption up to 1500 nanometers. The polymer-based OPD delivers a high specific detectivity D^* of 1.03 × 10¹⁰ Jones (-2 volts) at 1200 nanometers and a dark current J_d of just 2.3 × 10^-6 ampere per square centimeter at -2 volts. We demonstrate a strong improvement of all OPD metrics in the NIR region compared to previously reported NIR OPD due to the enhanced crystallinity and optimized energy alignment, which leads to reduced charge recombination. The high D^* value in the 1100-to-1300-nanometer region is particularly promising for biosensing applications. We demonstrate the OPD as a pulse oximeter under NIR illumination, delivering heart rate and blood oxygen saturation readings in real time without signal amplification.

Variation in the Optical Properties of PEO-Based Composites via a Green Metal Complex: Macroscopic Measurements to Explain Microscopic Quantum Transport from the Valence Band to the Conduction Band

In this study, a green chemistry method was used to synthesize polymer composites based on polyethylene oxide (PEO). The method of the remediation of metal complexes used in this study is an environmentally friendly procedure with a low cost. Zinc metal ion (Zn²⁺)-polyphenol (PPHNL) complexes were synthesized for two minutes via the combination of a black tea leaf (BTL) extract solution with dissolved Zn-acetate. Then, UV-Vis and FTIR were carried out for the Zn-PPHNL complexes in a liquid and solid. The FTIR spectra show that BTLs contain sufficient functional groups (O-H, C-H, C=O, C=C, C-O, C-N, and N-H), PPHNL, and conjugated double bonds to produce metal complexes by capturing the cations of Zn-acetate salt. Moreover, FTIR of the BTL and Zn-PPHNL complexes approves the formation of the Zn-PPHNL complex over the wide variation in the intensity of bands. The UV absorption spectra of BTL and Zn-PPHNL indicate complex formation among tea PPHNL and Zn cations, which enhances the absorption spectra of the Zn-PPHNL to 0.1 compared to the figure of 0.01 associated with the extracted tea solution. According to an XRD analysis, an amorphous Zn-PPHNL complex was created when Zn²⁺ ions and PPHNL interacted. Additionally, XRD shows that the structure of the PEO composite becomes a more amorphous structure as the concentration of Zn-PPHNL increases. Furthermore, morphological study via an optical microscope (OM) shows that by increasing the concentration of Zn-PPHNL in a PEO polymer composite the size of the spherulites ascribed to the crystalline phase dramatically decreases. The optical properties of PEO: Zn-PPHNL films, via UV-Vis spectroscopy, were rigorously studied. The E_g is calculated by examining the dielectric loss, which is reduced from 5.5 eV to 0.6 eV by increasing the concentration of Zn-PPHNL in the PEO samples. In addition, Tauc's form was used to specify the category of electronic transitions in the PEO: Zn-PPHNL films. The impact of crystalline structure and morphology on electronic transition types was discussed. Macroscopic measurable parameters, such as the refractive index and extinction coefficient, were used to determine optical dielectric loss. Fundamental optical dielectric functions were used to determine some key parameters. From the viewpoint of quantum transport, electron transitions were discussed. The merit of this work is that microscopic processes related to electron transition from the VB to the CB can be interpreted interms of measurable macroscopic quantities.

Diketo-Pyrrolo Pyrrole-Based Acceptor-Acceptor Copolymers with Deep HOMO and LUMO Levels Absorbing in the Near Infrared

A series of acceptor-acceptor (A-A’) alternated copolymers based on dithienodiketopyrrolo pyrrole were synthesized by copolymerizing it with itself and other different electron-poor monomers. The experimental and computed optoelectronic properties of four DPP-based copolymers, P(DPP-DPP) (with linear and branched chains), copolymer with diazapentalene P(DPP-DAP) and also with dioxothienopyrrolebenzodifurandione P(DPP-BTPBF), as well as thermal characterizations were described. UV-visible spectrophotometry and cyclic voltammetry were used to estimate the optical and electrochemical bandgaps, and were found as very small: 1.3, 1.0, and 0.9 eV for P(DPP-DPP), P(DPP-DAP), and P(DPP-BTPBF), respectively. The BTPBF unit allowed a strong reduction of the bandgap, leading to a broad absorption in the visible and near infra-red regions from 650 to 1450 nm. These results were compared to analogous donor-acceptor (D-A) copolymers previously reported, in which DPP is replaced by DTS, P(DTS-DPP), P(DTS-DAP), and P(DTS-BTPBF). The same trend was observed. By comparing A-A’ to D-A’ copolymers analogues, it was shown that the bandgap remained the same while both HOMO and LUMO levels were lowered by roughly 0.2 eV.

Intrinsic Detectivity Limits of Organic Near-Infrared Photodetectors

Organic photodetectors (OPDs) with a performance comparable to that of conventional inorganic ones have recently been demonstrated for the visible regime. However, near-infrared photodetection has proven to be challenging and, to date, the true potential of organic semiconductors in this spectral range (800-2500 nm) remains largely unexplored. In this work, it is shown that the main factor limiting the specific detectivity (D*) is non-radiative recombination, which is also known to be the main contributor to open-circuit voltage losses. The relation between open-circuit voltage, dark current, and noise current is demonstrated using four bulk-heterojunction devices based on narrow-gap donor polymers. Their maximum achievable D* is calculated alongside a large set of devices to demonstrate an intrinsic upper limit of D* as a function of the optical gap. It is concluded that OPDs have the potential to be a useful technology up to 2000 nm, given that high external quantum efficiencies can be maintained at these low photon energies.

Functionalized NIR-II Semiconducting Polymer Nanoparticles for Single-cell to Whole-Organ Imaging of PSMA-Positive Prostate Cancer

Development of molecular probes holds great promise for early diagnosis of aggressive prostate cancer. Here, 2-[3-(1,3-dicarboxypropyl) ureido] pentanedioic acid (DUPA)-conjugated ligand and bis-isoindigo-based polymer (BTII) are synthesized to formulate semiconducting polymer nanoparticles (BTII-DUPA SPN) as a prostate-specific membrane antigen (PSMA)-targeted probe for prostate cancer imaging in the NIR-II window. Insights into the interaction of the imaging probes with the biological targets from single cell to whole organ are obtained by transient absorption (TA) microscopy and photoacoustic (PA) tomography. At single-cell level, TA microscopy reveals the targeting efficiency, kinetics, and specificity of BTII-DUPA SPN to PSMA-positive prostate cancer. At organ level, PA tomographic imaging of BTII-DUPA SPN in the NIR-II window demonstrates superior imaging depth and contrast. By intravenous administration, BTII-DUPA SPN demonstrates selective accumulation and retention in the PSMA-positive tumor, allowing noninvasive PA detection of PSMA overexpressing prostate tumors in vivo. The distribution of nanoparticles inside the tumor tissue is further analyzed through TA microscopy. These results collectively demonstrate BTII-DUPA SPN as a promising probe for prostate cancer diagnosis by PA tomography.

Asymmetric Siloxane Functional Side Chains Enable High-Performance Donor Copolymers for Photovoltaic Applications

In this work, three benzodithiophene-benzotriazole alternated wide band gap copolymers attaching symmetric or asymmetric conjugated side chains, namely, PDBTFBTA-2T, PBDTFTBA-TSi, and PBDTFBTA-2Si, were developed for efficient nonfullerene polymer solar cells. The symmetry effect of the side chains was investigated in detail on the overall properties of these donor polymers. The results demonstrated that the introduced siloxane functional groups showed less effect on the absorption and frontier orbital levels of the prepared polymers but had a significant effect on the miscibility between these polymer donors and the nonfullerene acceptor. When increasing the content of siloxane functional groups, the miscibility of the polymer donors and Y6 would be improved, leading to the decreased domain size and more mixed domains. Interestingly, the active blend based on PBDTFTBA-TSi with asymmetric side chains exhibited more balanced miscibility, carrier mobility, and phase separation, benefiting exciton diffusion and dissociation. Therefore, a champion power conversion efficiency (PCE) of 14.18% was achieved finally in PBDTFTBA-TSi devices, which was 20.6 and 19.0% higher than the symmetric counterparts of PBTFBTA-2T devices (PCE = 11.76%) and PBDTFBTA-2Si devices (PCE = 11.92%), respectively. This work highlights that the asymmetric side-chain engineering based on siloxane functional groups is a promising design strategy for high-performance polymer donor semiconductors.

The Effects of Side Chains on the Charge Mobilities and Functionalities of Semiconducting Conjugated Polymers beyond Solubilities

Recent decades have witnessed the rapid development of semiconducting polymers in terms of high charge mobilities and applications in transistors. Significant efforts have been made to develop various conjugated frameworks and linkers. However, studies are increasingly demonstrating that the side chains of semiconducting polymers can significantly affect interchain packing, thin film crystallinity, and thus semiconducting performance. Ways to modify the side alkyl chains to improve the interchain packing order and charge mobilities for conjugated polymers are first discussed. It is shown that modifying the branching chains by moving the branching points away from the backbones can boost the charge mobilities, which can also be improved through partially replacing branching chains with linear ones. Second, the effects of side chains with heteroatoms and functional groups are discussed. The siloxane-terminated side chains are utilized to enhance the semiconducting properties. The fluorinated alkyl chains are beneficial for improving both charge mobility and air stability. Incorporating H bonding group side chains can improve thin film crystallinities and boost charge mobilities. Notably, incorporating functional groups (e.g., glycol, tetrathiafulvalene, and thymine) into side chains can improve the selectivity of field-effect transistor (FET)-based sensors, while photochromic group containing side chains in conjugated polymers result in photoresponsive semiconductors and optically tunable FETs.

Development of a quantum chemical descriptor expressing aromatic/quinoidal character for designing narrow-bandgap π-conjugated polymers

Guidance for designing narrow-bandgap copolymers was established by developing a chemical descriptor (QSE) that considers only the monomer and linking sites.

Recent Advances in Isoindigo-Inspired Organic Semiconductors

Over the past decade, isoindigo has become a widely used electron-deficient subunit in donor-acceptor organic semiconductors, and these isoindigo-based materials have been widely used in both organic photovoltaic (OPV) devices and organic field effect transistors (OFETs). Shortly after the development of isoindigo-based semiconductors, researchers began to modify the isoindigo structure in order to change the optoelectronic properties of the resulting materials. This led to the development of many new isoindigo-inspired compounds; since 2012, the Kelly Research Group has synthesized a number of these isoindigo analogues and produced a variety of new donor-acceptor semiconductors. In this Personal Account, recent progress in the field is reviewed. We describe how the field has evolved from relatively simple donor-acceptor small molecules to structurally complex, highly planarized polymer systems. The relevance of these materials in OPV and OFET applications is highlighted, with particular emphasis on structure-property relationships.

Thiazoloisoindigo: A Building Block that Merges the Merits of Thienoisoindigo and Diazaisoindigo for Conjugated Polymers

Thiazoloisoindigo, a novel structural variation of isoindigo, is for the first time utilized to synthesize conjugated polymers. The polymer based on thiazoloisoindigo merges the advantages of the one based on thienoisoindigo and diazaisoindigo; it not only exhibits a greatly redshifted UV/Vis absorption to the near-infrared region owing to its strong tendency to form quinoidal structures, similar to that based on thienoisoindigo, but also shows excellent ambipolar mobility (hole: 3.93, electron: 1.07 cm²  V^-1  s^-1 ) in organic field-effect transistors (OFETs), superior to that based on diazaisoindigo, showing the strong electron-withdrawing capability of thiazoloisoindigo.

Semiconducting Polymer Nanoparticles for Centimeters-Deep Photoacoustic Imaging in the Second Near-Infrared Window

Thienoisoindigo-based semiconducting polymer with a strong near-infrared absorbance is synthesized and its water-dispersed nanoparticles (TSPNs) are investigated as a contrast agent for photoacoustic (PA) imaging in the second near-infrared (NIR-II) window (1000-1350 nm). The TSPNs generate a strong PA signal in the NIR-II optical window, where background signals from endogenous contrast agents, including blood and lipid, are at the local minima. By embedding a TSPN-containing tube in chicken-breast tissue, an imaging depth of more than 5 cm at 1064 nm excitation is achieved with a contrast-agent concentration as low as 40 µg mL^-1 . The TSPNs under the skin or in the tumor are clearly visualized at 1100 and 1300 nm, with negligible interference from the tissue background. TSPN as a PA contrast in the NIR-II window opens new opportunities for biomedical imaging of deep tissues with improved contrast.

Lewis Acid-Base Chemistry of 7-Azaisoindigo-Based Organic Semiconductors

Low-band-gap organic semiconductors are important in a variety of organic electronics applications, such as organic photovoltaic devices, photodetectors, and field effect transistors. Building on our previous work, which introduced 7-azaisoindigo as an electron-deficient building block for the synthesis of donor-acceptor organic semiconductors, we demonstrate how Lewis acids can be used to further tune the energies of the frontier molecular orbitals. Coordination of a Lewis acid to the pyridinic nitrogen of 7-azaisoindigo greatly diminishes the electron density in the azaisoindigo π-system, resulting in a substantial reduction in the lowest unoccupied molecular orbital (LUMO) energy. This results in a smaller highest occupied molecular orbital-LUMO gap and shifts the lowest-energy electronic transition well into the near-infrared region. Both H⁺ and BF₃ are shown to coordinate to azaisoindigo and affect the energy of the S₀ → S₁ transition. A combination of time-dependent density functional theory and UV/vis and ¹H NMR spectroscopic titrations reveal that when two azaisoindigo groups are present and high concentrations of acid are used, both pyridinic nitrogens bind Lewis acids. Importantly, we demonstrate that this acid-base chemistry can be carried out at the solid-vapor interface by exposing thin films of aza-substituted organic semiconductors to vapor-phase BF₃·Et₂O. This suggests the possibility of using the BF₃-bound 7-azaisoindigo-based semiconductors as n-type materials in various organic electronic applications.

Influence of structure–property relationships of two structural isomers of thiophene-flanked diazaisoindigo on carrier-transport properties

Two structural isomers of thiophene-flanked diazaisoindigo, 6,6′-substituted 6,6′-T-DAII and 5,5′-substituted 5,5′-T-DAII, have been synthesized to study the influence of the connecting modes on the carrier-transport properties.