Syntheses of Iminophosphomamido Chlorogermylenes and Their Complexation with a Rhodium(I) Complex

Three-coordinated chlorogermylenes of the type [Ph2 P(RN)2 ]GeCl (3: R=t Bu; 4: R=Dip=2,6-i Pr2 C6 H3 ), which bear an N,N-substituted iminophosphonamide ligand, were synthesized. The coordination behavior of 3 and 4 toward rhodium(I) complex was investigated. When 3 was treated with 1/2 of an equivalent of [RhCl(cod)]2 (cod=1,5-cyclooctadiene), the corresponding chlorogermylene-Rh(I) complex 5 was obtained as orange crystals. In contrast, the reaction of 4 with a half equivalent of [RhCl(cod)]2 under a CO atmosphere resulted in the formation of a five-membered germarhodacycle 7. Compounds 3, 4, 5, and 7 were characterized using NMR spectroscopies and single-crystal X-ray diffraction. Complex 5 can be employed as a catalyst for the hydrosilylation and hydroboration reactions of diphenylacetylene, thus demonstrating the utility of germylene ligands comparable to those of NHCs in the major transition metal catalytic processes.

Lithium Triethylborohydride (LiHBEt3)-Promoted Hydrosilylation of Allenes to Prepare (E)-Allylsilanes

A transition-metal-free hydrosilylation of allenes is reported herein by using commercially available lithium triethylborohydride (LiHBEt3) as the catalyst. Both mono- and disubstituted allenes could be hydrosilylated with primary or secondary silanes effectively. This reaction represents an environmental and economic method to prepare (E)-allylsilanes in good yields along with decent selectivities.

Diverse Synthesis of Alkenylsilanes via Pd-Catalyzed Alkenyl C-H Silylation

Here, we disclose a general approach for the diverse synthesis of alkenylsilanes in a highly efficient, stereoselective, and atom-economic manner by leveraging the palladium-catalyzed disilylation reaction of 2-bromostyrene derivatives with hexamethyldisilane, which is suitable for the preparation of a series of disubstituted, trisubstituted, and tetrasubstituted alkenylsilanes. Furthermore, the resulting tetrasubstituted alkenylsilanes could be readily transformed into the corresponding diarylated benzosiloles, which have been proven to be a potential AIE material and a fluorene material.

Silylium-Catalyzed Regio- and Stereoselective Carbosilylation of Ynamides with Allylic Trimethylsilanes

The regio- and stereoselective carbosilylation of tosylynamides with allylic trimethylsilanes takes place under mild conditions in the presence of catalytic TMSNTf₂ or HNTf₂ to give (Z)-α-allyl-β-trimethylsilylenamides with good yields. Theoretical calculations show the activation of the C-C triple bond of the ynamides by the trimethylsilylium ion and formation of a β-trimethylsilylketenimonium cation. Further transformations of the products demonstrate the synthetic utility of this reaction.

Ligand-controlled regiodivergence in cobalt-catalyzed hydrosilylation of isoprene

An atom-economical, regiodivergent hydrosilylation reaction of isoprene was developed using an Earth-abundant cobalt catalyst through variation of ligands.

Introducing the Catalytic Amination of Silanes via Nitrene Insertion

The direct functionalization of Si–H bonds by the nitrene insertion methodology is described. A copper(I) complex bearing a trispyrazolylborate ligand catalyzes the transfer of a nitrene group from PhI=NTs to the Si–H bond of silanes, disilanes, and siloxanes, leading to the exclusive formation of Si–NH moieties in the first example of this transformation. The process tolerates other functionalities in the substrate such as several C–H bonds and alkyne and alkene moieties directly bonded to the silicon center. Density functional theory (DFT) calculations provide a mechanistic interpretation consisting of a Si–H homolytic cleavage and subsequent rebound to the Si-centered radical.

Construction of sulfur-containing N-vinylimides: N-addition of imides to propargyl sulfonium salts

An N-addition reaction between imides and propargyl sulfonium salts was developed to afford sulfur-containing N-vinylimides with moderate to excellent yields. Under the activation of NaOAc·3H₂O, imides could undergo deprotonation and propargyl sulfonium salts could isomerize to allenic sulfonium salts. The N-nucleophilic attack initiates the reaction and gives the desired products. Various imides, including arylimides, aliphatic imides and N-(arylsulfonyl) alkyl acylamides, and even bioactive saccharin, thalidomide and pomalidomide could provide organosulfur N-vinylimides compounds. The simple, mild and metal-free reaction conditions, the broad scope of substrates, gram-scale synthesis and convenient transformation embody the synthetic superiority of this process.

An N-addition reaction between imides and propargyl sulfonium salts was developed to afford sulfur-containing N-vinylimides with moderate to excellent yields.

Palladium-Catalyzed Silylcyanation of Ynamides: Regio- and Stereoselective Access to Tetrasubstituted 3-Silyl-2-Aminoacrylonitriles

The palladium-catalyzed silylcyanation of ynamides is described. This reaction is fully regioselective, delivering tetrasubstituted 2-aminoacrylonitriles derivatives exclusively. Unexpectedly, the nature (aryl or alkyl) of the substituent located at the β-position of the ynamide directly controls the stereoselectivity. The reaction tolerates a number of functional groups and can be considered as the first general access to fully substituted 2-aminoacrylonitriles. Given the singular reactivity observed, a computational study was performed to shed light on the mechanism of this intriguing transformation. Relying on the specific reactivity of the newly installed vinylsilane functionality, the scope of 2-aminoacrylonitriles has been enlarged by postfunctionalization.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)–carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)–metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM–E and TM–H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid–hydrogen and metalloid–metalloid bonds to unsaturated compounds; activation and functionalization of C–H bonds and C–X bonds with hydrometalloids and bismetalloids; activation and functionalization of C–H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

Cu-catalyzed C(sp2)-N-bond coupling of boronic acids and cyclic imides

A general Cu-catalyzed strategy for coupling cyclic imides and alkenylboronic acids by forming C(sp²)-N-bonds is reported. The method enables the practical and mild preparation of (E)-enimides. A large range of cyclic imides are allowed, and di- and tri-substituted alkenylboronic acids can be used. Full retention was observed in the configuration of the alkene double bond in the coupled products. The method is also applicable for preparing N-arylimides, using arylboronic acids as coupling partners. The usefulness of this strategy is exemplified by the convenient derivatization of the chemotherapy medication 5-flurouracil, the nucleoside uridine and the anti-epileptic drug phenytoin.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the β(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable β-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent β-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the β(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high β(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Asymmetric synthesis of chiral organosilicon compounds via transition metal-catalyzed stereoselective C-H activation and silylation

This feature article details the progress of transition metal-catalyzed stereoselective sp² and sp³ C-H activation and silylation in the synthesis of chiral organosilicon compounds, and the asymmetric C-H silylation includes intramolecular cyclizing silylation and intermolecular silylation. The silylating reagents include monohydrosilanes, dihydrosilanes, silacylcobutanes and disilanes. In general, catalytic systems include a transition metal salt as the catalyst and a chiral ligand. No external chiral ligand is required in some cases where the chiral substrates act as the source of chirality. Many kinds of silylated compounds with central, axial, planar, or helical chirality have been constructed via C-H activation by asymmetric rhodium, iridium or palladium catalysis. Some pharmacophores and material building blocks were successfully introduced into the target molecules. Some silylated products proved to be useful in medicinal chemistry, synthetic organic chemistry, and materials science. Besides reaction development, mechanisms for stereoselective C-H activation and silylation are also discussed.

(Z)-Selective Hydrosilylation and Hydroboration of Terminal Alkynes Enabled by Ruthenium Complexes with an N-Heterocyclic Carbene Ligand

Metal-catalyzed trans-1,2-hydrosilylations and hydroborations of terminal alkynes that generate synthetically valuable (Z)-alkenylsilanes and (Z)-alkenylboranes remain challenging due to the (E)-selective nature of the reactions and the formation of the thermodynamically unfavorable (Z)-isomer. The development of new, efficient catalytic systems for the (Z)-selective hydrosilylation and hydroboration of terminal alkynes is thus highly desirable from a fundamental perspective as it would deepen our understanding of the metal-catalyzed (Z)-selective hydrosilylation and hydroboration of terminal alkynes. This personal account describes our research for developing a ruthenium complex that can efficiently catalyze the hydrosilylation and hydroboration of terminal alkynes, and for exploring the factors controlling (Z)-selectivity of the reactions. Our effort into the activation of B-protected boronic acids, R-B(dan) (dan=naphthalene-1,8-diaminato), that was believed not to participate in Suzuki-Miyaura cross-coupling, is also discussed.

Treating octasilanol [Si8O12][OH]8 with tetramethoxysilane and trimethoxyvinylsilane: a halogen-free synthetic route to alkoxysilyl-substituted double-four-ring siloxanes

The synthesis of methoxysilyl-substituted siloxanes with a double-four-ring (D4R) framework [Si8O12][OSiR(OMe)2]8 (R = OMe or vinyl) via the dealcoholative coupling between silanol [Si8O12][OH]8 and alkoxysilane was accomplished and achieved a halogen-free synthetic process. The solid-state structure of [Si8O12][OSi(OMe)3]8 was determined via a single-crystal X-ray diffraction analysis.

Schiff Base Cobalt(II) Complex-Catalyzed Highly Markovnikov-Selective Hydrosilylation of Alkynes

A bench-stable cobalt(II) complex, with 3N-donor socket-type benzimidazole-imine-2H-imidazole ligand is reported as a precatalyst for regioselective hydrosilylation of terminal alkynes. Both aromatic and aliphatic alkynes could be effectively hydrosilylated with primary, secondary, and tertiary silane to give α-vinylsilanes in high yields with excellent Markovnikov selectivity and extensive functional-group tolerance. Catalyst loading varies within 0.5–0.05 mol %, which is one of the most efficient reported so far in the literature on cobalt-catalyzed alkyne hydrosilylation.

A library of new bifunctional alkenes obtained by a highly regiodivergent silylation of 1,5-hexadiene

An efficient methodology for the synthesis of two groups of silicon-containing alkenes is reported. It includes a highly regioselective functionalization of 1,5-hexadiene through hydrosilylation and dehydrogenative silylation with organofunctional silanes and siloxanes. The established conditions enable selective monofunctionalization of 1,5-hexadiene regardless of the organosilicon modifier used as well as the type of functional group bonded to the silicon-based compound. All products were isolated and fully characterized by NMR spectroscopy and MS techniques.

An efficient methodology for the synthesis of two groups of silicon-containing alkenes is reported.

Highly regio- and stereo-selective heterogeneous 1,3-diyne hydrosilylation controlled by a nickel-metalated porous organic polymer

A porous organic polymer (POL-xantphos) was synthesized and employed as a heterogeneous ligand for nickel catalyzed highly regio- and stereo-selective 1,3-diyne hydrosilylation.

Cu-Catalyzed highly selective silylation and borylation of alkenylsulfonium salts

A Cu-catalyzed highly selective silylation and borylation of alkenylsulfonium salts under mild conditions is reported providing various alkenylsilanes and alkenylboranes.

Application of Green Solvents: PEG and scCO2 in the Mono- or Biphasic Catalytic Systems for the Repetitive Batch Coupling of Vinylsilanes with Vinyl Boronates toward 1-Boryl-1-silylethenes

A new method for the repetitive batch silylative coupling (trans-silylation) of vinylsilanes with vinyl boronates in the presence of Ru(CO)Cl(H)(PCy3)2 immobilized in poly(ethylene glycols) (PEGs) has been developed. Three PEGs (PEG600, PEG2000, and MPEG2000) with different molecular weights and end groups (MW = 600-2000) were tested as solvents and immobilization media, while an aliphatic solvent (n-hexane or n-heptane) or supercritical CO2 was used for product extraction. By applying 2 mol % of the Ru-H catalyst, it was possible to carry out up to 15 complete runs, with the predominant formation of 1-boryl-1-silylethenes. This immobilization strategy permitted for catalyst reuse and obtaining higher TON values (approximately 660-734) compared to the reaction in conventional solvents (∼50). Detailed kinetic studies of the most effective catalytic system were performed to determine catalyst activity and stability. Moreover, the reactions were carried out in an MPEG2000/scCO2 biphasic system, positively influencing the process sustainability.

Divergent reactivity of divinylsilanes toward sulfonamides in different oxidative systems

Oxidative sulfonamidation of divinylsilanes with various sulfonamides in different solvents is reported. With t-BuOI as an oxidant, halogenation is the main process, whereas aziridines are the minor products. With NBS in CH₂Cl₂ the products of bromination or bromosulfonamidation were obtained, whereas in MeCN or THF the Ritter-type solvent interception products are formed. The obtained bromosulfonamidation products undergo base-induced cyclization to various heterocycles, including imidazolines, 1,4-oxazocanes, or Si,N-containing heterocycles of a new type, 1,3,5-diazasilinanes, in up to quantitative yield.

Highly β( Z)-Selective Hydrosilylation of Terminal Alkynes Catalyzed by Thiolate-Bridged Dirhodium Complexes

A series of novel monothiolate-bridged dirhodium complexes, [Cp*Rh(μ-SR)(μ-Cl)₂RhCp*][BF₄] {Cp* = η⁵-C₅Me₅, R = tertiary butyl ( ^tBu), 1a; R = ferrocenyl (Fc), 1b; R = adamantyl (Ad), 1c} were designed and successfully synthesized, which can smoothly facilitate highly regioselective and stereoselective hydrosilylation of terminal alkynes to afford β( Z) vinylsilanes with good functional group compatibility. Furthermore, the hydride bridged dirhodium complex [Cp*Rh(μ-S ^tBu)(μ-Cl)(μ-H)RhCp*][BF₄] (5) as a potential intermediate was obtained by the reaction of 1a with excess HSiEt₃.