Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e-/h+), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

State-of-the-art developments in carbon-based metal nanocomposites as a catalyst: photocatalysis

The rapid progress of state-of-the-art carbon-based metals as a catalyst is playing a central role in the research area of chemical and materials engineering for effective visible-light-induced catalytic applications. Numerous admirable catalysts have been fabricated, but significant challenges persist to lower the cost and increase the action of catalysts. The development of carbon-based nanostructured materials (i.e., activated carbon, carbon nitride, graphite, fullerenes, carbon nanotubes, diamond, graphene, etc.) represents an admirable substitute to out-of-date catalysts. Significant efforts have been made by researchers toward the improvement of various carbon-based metal nanostructures as catalysts. Moreover, incredible development has been achieved in several fields of catalysis, such as visible-light-induced catalysis, electrochemical performance, energy storage, and conversion, etc. This review gives an overview of the up-to-date developments in the strategy of design and fabrication of carbon-based metal nanostructures as photo-catalysts by means of several methods within the green approach, including chemical synthesis, in situ growth, solution mixing, and hydrothermal approaches. Moreover, the photocatalytic effects of the resulting carbon-based nanostructure classifications are similarly deliberated relative to their eco-friendly applications, such as photocatalytic degradation of organic dye pollutants.

Vitex negundo assisted green synthesis of metallic nanoparticles with different applications: a mini review

Background

Several attempts have been made for green synthesis of nanoparticles of different metals and metal oxides, revealing the significance of plant extracts in reducing metal source to nanoparticles and applications in various scientific domains.

Main body

The present article focus on applications of Vitex negundo leaves extract in fabrication of nanoparticles of various metals like silver, gold, zinc oxide, and copper oxide. Vitex negundo is evergreen, perennial shrub, belonging to family Verbenaceae. Its leaves are reported to contain several phytochemicals like iridoids, flavonoids, and their glycosides, terpenoids. In respective research attempts, these metallic nanoparticles were evaluated for one or more applications like anti-microbial activity and/or photocatalytic activity.

Conclusions

Use of V. negundo polar extract indicated involvement of its polar phytocompounds in reducing the metal source and stabilizing the nanoparticles. In conclusion, it could be noted that metal nanoparticles have better antimicrobial activity and photocatalytic potential over aqueous leaves extract.

Insights into Advancements and Electrons Transfer Mechanisms of Electrogens in Benthic Microbial Fuel Cells

Benthic microbial fuel cells (BMFCs) are a kind of microbial fuel cell (MFC), distinguished by the absence of a membrane. BMFCs are an ecofriendly technology with a prominent role in renewable energy harvesting and the bioremediation of organic pollutants through electrogens. Electrogens act as catalysts to increase the rate of reaction in the anodic chamber, acting in electrons transfer to the cathode. This electron transfer towards the anode can either be direct or indirect using exoelectrogens by oxidizing organic matter. The performance of a BMFC also varies with the types of substrates used, which may be sugar molasses, sucrose, rice paddy, etc. This review presents insights into the use of BMFCs for the bioremediation of pollutants and for renewable energy production via different electron pathways.

Solar-Driven Carbon Nanoreactor Coupling Gold and Platinum Nanocatalysts for Alcohol Oxidations

This research reports gold (Au) and platinum (Pt) nanocatalysts spatially confined in a porous carbon nanosphere as a new solar-driven carbon nanoreactor (CNR). The CNRs have confined size (≈100 nm), high specific surface area, and high thermal and electrical conductivity. The black color of CNR can improve the energy harvest efficiency of the solar irradiation to thermal energy within each nanoreactor. The localized surface plasmon resonance (LSPR) on Au nanocatalysts-induced electron oscillation causes the localized heating effect inside each CNR. Therefore, the heat will be accumulated in the confined space of CNR and transferred to reaction energy to drive the alcohol oxidation on uniformly dispersed Au and Pt nanoparticles inside the nanoreactor. The energetic electrons induced by LSPR effect on the surface of Au nanoparticles are transferred to the nearby and more active Pt surface via the conductive CNR, which strongly enhances the conversion of cinnamyl alcohol from 14% on Pt-CNR up to 100% on AuPt-CNR after a 3 h reaction. Therefore, the cooperative effect of Au and Pt nanoparticles confined in the CNRs utilized in this work can largely increase the efficiency of harvesting solar energy to drive the important chemical processes.

Assessment of Antioxidant Activity of Pure Graphene Oxide (GO) and ZnO-Decorated Reduced Graphene Oxide (rGO) Using DPPH Radical and H2O2 Scavenging Assays

In this work, zinc oxide-decorated graphene oxide (ZnO–rGO) was successfully synthesized with a fast reflux chemical procedure at 100 °C. An equal mass ratio of graphene oxide (GO) and zinc acetate was used as starting materials dissolved, respectively, in ultrapure distilled water and dimethylformamide (DMF). Particularly, pure GO was synthesized using Hummers modified protocol by varying the mass ratio of (graphite:potassium permanganate) as follows: 1:2, 1:3, and 1:4, which allow us to obtain six types of pure and decorated samples, named, respectively, GO1:2, GO1:3, GO1:4, ZnO–rGO1:2, ZnO–rGO1:3, and ZnO–rGO1:4 using reflux at 100 °C. X-ray diffraction, FTIR, and Raman spectroscopy spectra confirm the formation of wurzite ZnO in all ZnO-decorated samples with better reduction of GO in ZnO–rGO1:4, confirming that a higher degree of graphene oxidation allows better reduction during the decoration process with ZnO metal oxide. Antioxidant activity of pure and zinc oxide-decorated graphene oxide samples were compared using two different in vitro assays (DPPH radical and H2O2 scavenging activities). Considerable in vitro antioxidant activities in a concentration-dependent manner were recorded. Interestingly, pristine GO showed more elevated scavenging efficiency in DPPH tests while ZnO-decorated GO was relatively more efficient in H2O2 antioxidant assays.

X-ray Photospectroscopy and Electronic Studies of Reactor Parameters on Photocatalytic Hydrogenation of Carbon Dioxide by Defect-Laden Indium Oxide Hydroxide Nanorods

In the study reported herein, glovebox-protected X-ray photoelectron spectroscopy (XPS) and in situ Hall charge carrier measurements provide new insights into the surface physical chemistry of gaseous H₂, CO₂, and H₂+CO₂ combined with nanostructured In₂O_(3−x)(OH)_y nanorods, which ensue under photochemical and thermochemical operating conditions. Heterolytic dissociation of H₂ in H₂-only atmosphere appears to occur mainly under dark and ambient temperature conditions, while the greatest amount of OH shoulder expansion in H₂+CO₂ atmosphere appears to mainly occur under photoilluminated conditions. These results correlate with those of the Hall measurements, which show that the prevalence of homolytic over heterolytic dissociation at increasing temperatures leads to a steeper rate of increase in carrier concentrations; and that H₂ adsorption is more prevalent than CO₂ in H₂+CO₂ photoillumination conditions.

Surfactant-free synthesis of hollow mesoporous carbon spheres and their encapsulated Au derivatives using biopolymeric chitosan

To realize surfactant-free synthesis of biomass-derived hollow mesoporous carbon spheres and their derivatives, choice of synthetic methodology and carbon precursor is crucial. Herein, a brand-new hollow mesoporous carbon sphere (HMCS) is first synthesized from 8-quinolinol modified chitosan via an in situ stöber templating approach without surfactant followed by pyrolysis and alkali washing. The resultant HMCS is uniform, and shows a cavity size of 417 nm, a shell thickness of 5 nm, and a narrow mesopore size distribution centered at 3.9 nm. The HMCS is then upgraded by encapsulation of a single Au nanocrystal (NC) into the void of HMCS to form a yolk-shell architecture, YS-Au@HMCS. Its cavity size and shell thickness are decreased to 187 and 3 nm, while the mesopore size is increased to 4.3 nm, the surface area (215 m² g^-1) and mesoporosity (74.7%) are triple and twice that of HMCS, respectively, just by halving the delay time of carbon source addition. Owing to the unique hollow interiors and mesopores, as well as their synergism with the encapsulated Au NCs, the elaborately fabricated YS-Au@HMCS exhibits appealing catalytic performances towards the deposal of sewage. It delivers a large activity factor of 34.32, 13.29 and 0.05 s^-1 g^-1 in the reduction of 4-nitrophenol and methylene blue using sodium borohydride, and in the photodegradation of methylene blue under visible light irradiation, respectively. These advances shed new light on the synthesis of hollow mesoporous carbon spheres and the designed synthesis of functional carbon materials with versatile applications.

Recent progress of metal-graphene nanostructures in photocatalysis

Metal-graphene nanostructures (NSs) as photocatalysts, prepared using simple and scalable synthesis methods, are gaining heightened attention as novel materials for water treatment and environmental remediation applications. Graphene, the unique few layers sheet-like arrangement of sp2 hybridized carbon atoms, has an inimitable two-dimensional (2D) structure. The material is highly conductive, has high electron mobility and an extremely high surface area, and can be produced on a large scale at low cost. Accordingly, it has been considered as an essential base component for producing various metal-based NSs. In particular, metal-graphene NSs as photocatalysts have attracted considerable attention because of their special surface plasmon resonance (SPR) effect that can improve their performance for the removal of toxic dyes and other pollutants. This review summarizes the recent and advanced progress for the easy fabrication and design of graphene-based NSs as photocatalysts, as a novel tool, using a range of approaches, including green and biogenic approaches.

Environmentally sustainable biogenic fabrication of AuNP decorated-graphitic g-C3N4 nanostructures towards improved photoelectrochemical performances

Noble-metal gold (Au) nanoparticles (NPs) anchored/decorated on polymeric graphitic carbon nitride (g-C3N4), as a nanostructure, was fabricated by a simple, single step, and an environmentally friendly synthesis approach using single-strain-developed biofilm as a reducing tool. The well deposited/anchored AuNPs on the sheet-like structure of g-C3N4 exhibited high photoelectrochemical performance under visible-light irradiation. The Au-g-C3N4 nanostructures behaved as a plasmonic material. The nanostructures were analyzed using standard characterization techniques. The effect of AuNPs deposition on the photoelectrochemical performance of the Au-g-C3N4 nanostructures was examined by linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), incident photon-to-current efficiency (IPCE) and cyclic voltammetry (CV) in the dark and under visible-light irradiation. The optimal charge transfer resistance for Au-g-C3N4 nanostructures (6 mM) recorded at 18.21 ± 1.00 Ω cm-2 and high electron transfer efficiency, as determined by EIS. The improved photoelectrochemical performance of the Au-g-C3N4 nanostructures was attributed to the synergistic effects between the conduction band minimum of g-C3N4 and the plasmonic band of AuNPs, including high optical absorption, uniform distribution, and nanoscale particle size. This simple, biogenic approach opens up new ways of producing photoactive Au-g-C3N4 nanostructures for potential practical applications, such as visible light-induced photonic materials for real device development.

The performance of immobilized Candida rugosa lipase on various surface modified graphene oxide nanosheets

In this study, we have reported the synthesis of graphene oxide nanosheets (GON) and its functionalization with 2, 4, 6-trichloro-1, 3, 5-triazine (TCT) through two routes, (a) directly reaction of GON with TCT (GON-1), and (b) reaction of GON with pre-functionalized TCT with 3-aminopropyltriethoxysilane (APTS) (GON-2). Subsequently, GON, GON-1 and GON-2 have been used as supports for immobilization of Candida rugosa lipase (CRL). Several techniques such as XRD, SEM, EDS, UV-Vis, CHNS, FTIR and AFM were applied to characterize the nano-structures and success of synthesis, functionalization and CRL immobilization processes. The results corresponding to optimization of immobilization process revealed the following order for values of loading capacity, immobilization yield and leaching of CRL: GON > GON-1 > GON-2, while this order is reversed for, specific activity and recovery activity. The assessment of operational parameters represents the high storage stability and reasonable reusability for all the immobilized CRL while the pH and thermal stability of CRL@GON-2 are higher than two others. It seems the longer linker of GON-2 could more effectively prevent the unfavorable interaction between enzyme-enzyme and enzyme-product that consequently resulted the best catalytic performance, pH and thermal stability. The advantages of these supports make them suitable candidates for practical applications.

Extracellular Synthesis and Characterization of Gold Nanoparticles Using Mycobacterium sp. BRS2A-AR2 Isolated from the Aerial Roots of the Ghanaian Mangrove Plant, Rhizophora racemosa

Through the use of genomes that have undergone millions of years of evolution, marine Actinobacteria are known to have adapted to rapidly changing environmental pressures. The result is a huge chemical and biological diversity among marine Actinobacteria. It is gradually becoming a known fact that, marine Actinobacteria have the capability to produce nanoparticles which have reasonable sizes and structures with possible applications in biotechnology and pharmacology. Mycobacterium sp. BRS2A-AR2 was isolated from the aerial roots of the mangrove plant Rhizophora racemosa. The Mycobacterium was demonstrated for the first time ever to produce AuNPs with sizes that range between 5 and 55 nm. The highest level absorbance of the biosynthesized AuNPs was typical for actinobacterial strains (2.881 at 545 nm). The polydispersity index was measured as 0.207 in DLS and the zeta potential was negatively charged (- 28.3 mV). Significant vibration stretches were seen at 3314, 2358, 1635 and 667 cm^-1 in FT-IR spectra. This demonstrated the possible use of small aliphatic compounds containing -COOH, -OH, -Cl and -NH₂ functional groups in the stabilization of the AuNPs. The effect of the biosynthesized AuNPs on HUVEC and HeLA cell lines was measured at 48 h. IC₅₀ values were determined at 3500 µg/ml concentration for HUVEC and HeLA cell lines at 45.25 and 53.41% respectively.

Ce3+-ion, Surface Oxygen Vacancy, and Visible Light-induced Photocatalytic Dye Degradation and Photocapacitive Performance of CeO2-Graphene Nanostructures

Cerium oxide nanoparticles (CeO₂ NPs) were fabricated and grown on graphene sheets using a facile, low cost hydrothermal approach and subsequently characterized using different standard characterization techniques. X-ray photoelectron spectroscopy and electron paramagnetic resonance revealed the changes in surface states, composition, changes in Ce⁴⁺ to Ce³⁺ ratio, and other defects. Transmission electron microscopy (TEM) and high resolution TEM revealed that the fabricated CeO₂ NPs to be spherical with particle size of ~10–12 nm. Combination of defects in CeO₂ NPs with optimal amount of two-dimensional graphene sheets had a significant effect on the properties of the resulting hybrid CeO₂-Graphene nanostructures, such as improved optical, photocatalytic, and photocapacitive performance. The excellent photocatalytic degradation performances were examined by monitoring their ability to degrade Congo red ~94.5% and methylene blue dye ~98% under visible light irradiation. The photoelectrode performance had a maximum photocapacitance of 177.54 Fg⁻¹ and exhibited regular capacitive behavior. Therefore, the Ce³⁺-ion, surface-oxygen-vacancies, and defects-induced behavior can be attributed to the suppression of the recombination of photo-generated electron–hole pairs due to the rapid charge transfer between the CeO₂ NPs and graphene sheets. These findings will have a profound effect on the use of CeO₂-Graphene nanostructures for future energy and environment-related applications.

Preparation of a Fe3O4-Au-GO nanocomposite for simultaneous treatment of oil/water separation and dye decomposition

A nanocomposite capable of simultaneously controlling multiple water pollutants (soluble organic dye and insoluble chemical solvent) has been obtained. The Au and Fe₃O₄ nanoparticles (NPs) were modified on a graphene oxide (GO) surface via light reduction and covalent attachment. The obtained Fe₃O₄-Au-GO nanocomposite has magnetic driving ability and catalytic applications. The nanocomposite can form emulsions after wrapping an insoluble and volatile organic solvent inside; moreover, the multi-layer graphene shell structure may delay volatilization of the solvent, ensuring that the oil droplets are collected efficiently and completely by the Fe₃O₄-Au-GO nanocomposite. At the same time, the Au NPs on the surface of the composite can effectively catalyze the decomposition of an organic dye in water and the recovery of the nanocomposite catalyst can also be realized using an external magnetic field. The simultaneous treatment of non-soluble oil (organic solvents) and organic dyes in water can be realized by the Fe₃O₄-Au-GO nanocomposite. Therefore, based on surface modification of GO, one material with two types of water pollution treatment functions was realized. This provides a new way for the simultaneous treatment of oil separation and dye decomposition, and the assembled structure may result in emulsions to give new applications in fuel cells and other fields.

CdS-graphene Nanocomposite for Efficient Visible-light-driven Photocatalytic and Photoelectrochemical Applications

This paper reports cadmium sulphide nanoparticles-(CdS NPs)-graphene nanocomposite (CdS-Graphene), prepared by a simple method, in which CdS NPs were anchored/decorated successfully onto graphene sheets. The as-synthesized nanocomposite was characterized using standard characterization techniques. A combination of CdS NPs with the optimal amount of two-dimensional graphene sheets had a profound influence on the properties of the resulting hybrid nanocomposite, such as enhanced optical, photocatalytic, and photo-electronic properties. The photocatalytic degradation ability of the CdS-Graphene nanocomposite was evaluated by degrading different types of dyes in the dark and under visible light irradiation. Furthermore, the photoelectrode performance of the nanocomposite was evaluated by different electrochemical techniques. The results showed that the CdS-Graphene nanocomposite can serve as an efficient visible-light-driven photocatalyst as well as photoelectrochemical performance for optoelectronic applications. The significantly enhanced photocatalytic and photoelectrochemical performance of the CdS-Graphene nanocomposite was attributed to the synergistic effects of the enhanced light absorption behaviour and high electron conductivity of the CdS NPs and graphene sheets, which facilitates charge separation and lengthens the lifetime of photogenerated electron-hole pairs by reducing the recombination rate. The as-synthesized narrow band gap CdS-Graphene nanocomposite can be used for wide range of visible light-induced photocatalytic and photoelectrochemical based applications.

OH-initiated tropospheric photooxidation of allyl acetate: a theoretical study

The mechanisms of OH-initiated oxidation of allyl acetate in the presence of O2/NO have been investigated by performing density functional theory calculations. Two patterns (OH-addition and H-abstraction) of the initial reaction and the subsequent reactions of the primarily produced intermediates (IM1, IM2, and IM4) have been proposed. The OH-addition reactions are more favorable than the H-abstraction reactions, but H-abstraction from the CH2 group cannot be ignored. The major degradation products have been identified. The rate coefficients and the branching ratios of the primary reactions are obtained over the temperature of 200–500 K and the pressure range of 0.001–1000 atm. The total rate coefficient is 3.17 × 10−11 cm3 molecule−1 s−1 at 298 K and 1 atm. With respect to the typical concentration of OH radical (2.0 × 106 molecule cm−3), the atmospheric lifetime of AAC is estimated to be 4.40 h.

Fabrication of WO3 nanorods on graphene nanosheets for improved visible light-induced photocapacitive and photocatalytic performance

Visible light-induced photocatalytic degradation of organic pollutants using WO₃ nanorods–graphene nanocomposite.

Biogenic synthesis of a Ag–graphene nanocomposite with efficient photocatalytic degradation, electrical conductivity and photoelectrochemical performance

Visible light-driven photocatalytic degradation of organic pollutants using the Ag–graphene nanocomposite.

Au-loaded porous graphitic C3N4/graphene layered composite as a ternary plasmonic photocatalyst and its visible-light photocatalytic performance

A novel ternary plasmonic photocatalyst, Au-loaded porous graphitic C₃N₄/graphene layered composite (Au/pg-C₃N₄/GR), was fabricated by a facile sonication-photodeposition technique.