Colloidal Quantum Dots for Explosive Detection: Trends and Perspectives

Sensitive, accurate, and reliable detection of explosives has become one of the major needs for international security and environmental protection. Colloidal quantum dots, because of their unique chemical, optical, and electrical properties, as well as easy synthesis route and functionalization, have demonstrated high potential to meet the requirements for the development of suitable sensors, boosting the research in the field of explosive detection. Here, we critically review the most relevant research works, highlighting three different mechanisms for explosive detection based on colloidal quantum dots, namely photoluminescence, electrochemical, and chemoresistive sensing. We provide a comprehensive overview and an extensive discussion and comparison in terms of the most relevant sensor parameters. We highlight advantages, limitations, and challenges of quantum dot-based explosive sensors and outline future research directions for the advancement of knowledge in this surging research field.

A review of nanomaterials for biosensing applications

A biosensor is a device that reacts with the analyte to be analyzed, detects its concentration, and generates readable information, which plays an important role in medical diagnosis, detection of physiological indicators, and disease prevention. Nanomaterials have received increasing attention in the fabrication and improvement of biosensors due to their unique physicochemical and optical properties. In this paper, the properties of nanomaterials such as the size effect, optical and electrical properties, and their advantages in the field of biosensing are briefly summarized, and the application of nanomaterials can effectively improve the sensitivity and reduce the detection limit of biosensors. The advantages of commonly used nanomaterials such as gold nanoparticles (AuNPs), carbon nanotubes (CNTs), quantum dots (QDs), graphene, and magnetic nanobeads for biosensor applications are also reviewed. Besides, the two main types of biosensors using nanomaterials involved in their construction and their working principles are described, and the toxicity and biocompatibility of nanomaterials and the future direction of nanomaterial biosensors are discussed.

Machine learning predicted emission of water-stable CdTe quantum dots

Quantum dots (QDs) have attracted much attention and exhibit many attractive properties, including high absorption coefficient, adjustable bandgap, high brightness, long-term stability, and size-dependent emission. It is known that to obtain high-quality luminescent properties (i.e. emission color, color purity, quantum yield, and stability), the synthesis parameters must be precisely controlled. In this work, we have constructed a database with CdTe aqueous synthesis parameters and spectroscopic results and applied machine learning algorithms to better understand the influence of the main synthesis parameters of CdTe QDs on their final emission properties. A strong dependence of the final emission wavelength with the reaction time and surface ligands and precursors concentrations was demonstrated. These parameters adjusted synchronously were shown to be very useful for provide ideal synthesis conditions for the preparation of CdTe QDs with desirable emission wavelengths. Moreover, applying the algorithms correctly allows for obtaining information and insights into the growth kinetics of QDs under different synthetic conditions.

A fluorescence nanoprobe of N-Acetyl-L-Cysteine capped CdTe QDs for sensitive detection of nitrofurazone

A method was established for detecting the content of nitrofurazone (NFZ) by fluorescence quenching of N-Acetyl-L-Cysteine (NAC) coated cadmium telluride quantum dots (CdTe QDs). By means of transmission electron microscopy (TEM) and multispectral methods such as fluorescence and ultraviolet visible spectra (UV-vis), the synthesized CdTe QDs were characterized. The quantum yield (φ) of CdTe QDs was measured as 0.33 by reference method. The CdTe QDs had a better stability, the RSD of fluorescence intensity was 1.51% in three months. NFZ quenching the emission light of CdTe QDs was observed. The analyses of Stern-Volmer and time-resolved fluorescence suggested the quenching was static. The binding constants (K_a) between NFZ and CdTe QDs were 1.14 × 10⁴ (293 K), 0.74 × 10⁴ (303 K) and 0.51 × 10⁴ (313 K) L mol^-1. The hydrogen bond or van der Waals force was the dominated binding force between NFZ and CdTe QDs. The interaction was further characterized by UV-vis absorption as well as Fourier transform infrared spectra (FT-IR). Using fluorescence quenching effect, a quantitative determination of NFZ was carried out. The optimal experimental conditions were studied and determined as following: pH was 7 and contact time was 10 min. The effects of reagent addition sequence, temperature and the foreign substances including some metals (Mg²⁺; Zn²⁺; Ca²⁺; K⁺; Cu²⁺), glucose, bovine serum albumin (BSA) and furazolidone on the determination were studied. There was a high correlation between the concentration of NFZ (0.40 - 39.63 μg mL^-1) and F₀/F with the standard curve F₀/F = 0.0262c + 0.9910 (r = 0.9994). The detection limit (LOD) reached 0.04 μg mL^-1 (3S₀/S). The contents of NFZ in beef and bacteriostatic liquid were detected. The recovery of NFZ was 95.13% - 103.03% and RSD was 0.66% - 1.37% (n = 5).

Selective detection of aspartic acid in human serum by a fluorescent probe based on CuInS2@ZnS quantum dots

The importance of amino acids identification in biological systems has created expectation to develop a sensitive method for their detection. In this work, an efficient core-shell fluorescent quantum dots (QDs) probe based on CuInS₂ (CIS) core and ZnS shell with the formula of CIS@ZnS QDs were synthesised and characterised by FT-IR, UV-Vis, TEM and DLS techniques. The probe was used for detection of Aspartic Acid (Asp) in an aqueous media. The probe shows a remarkable fluorescence response toward Asp over the other amino acids such as valine (Val), glycine (Gly), phenylalanine (Phe), leucine (Leu), alanine (Ala), serine (Ser), isoleucine (Iso), threonine (Thr), methionine (Met), Glutamic acid (Glu), histidine (His), arginine (Arg), cysteine (Cys), asparagine (Asn), glutamine (Gln), citrolline (Cit), sarcosine (Sar) and ornithine (Orn) the fluorescence intensity quenches significantly upon addition of Asp in an aqueous media. The CIS@ZnS QDs probe showed a selective and sensitive response by fluorescence quenching toward Asp in the concentration range of 8.3 × 10^-7 M to 3.3 × 10^-4 M with the detection limit of 7.8 × 10^-8 M. The application of the sensor in determination of Asp in real human serum sample was also investigated. Based on our library search, the all reported fluorescent sensors for detection of Asp, either show a remarkable sensitivity to Glu acid. Luckily, this is the first presented optical probe able to detect just Asp from the solutions containing various amino acids.

Phase transferred and non-coated, water soluble perovskite quantum dots for biocompatibility and sensing

Despite the excellent optoelectronic properties exhibited by CsPbBr₃ QDs (PQDs) for sensing applications, their poor resistance to water does not allow their utilization as probes to detect analytes in aqueous media. The present work provides water soluble PQDs (dispersed in water) prepared by an appropriate phase engineering of the ligand. The dicarboxylate functional ligands at a particular pH allow the protonated state to form solvated carboxyl dimers, which interconnects PQDs, thus avoiding Ostwald ripening and enhancing the photoluminescence quantum yield (PLQY). As a proof of concept, this probe was applied to detect bioamines in water, namely histamine, hexamethylenediamine, phenethylamine, dopamine and thiamine. The probe is highly selective to histamine at concentrations below 500 nM and this selectivity of histamine over dopamine is very interesting and rarely reported. More importantly, this work offers a standard protocol for transferring PQDs from the organic to aqueous phase, for the detection of such biomolecules in water.

Bubble-pen lithography: Fundamentals and applications: Nanoscience: Special Issue Dedicated to Professor Paul S. Weiss

Developing on-chip functional devices requires reliable fabrication methods with high resolution for miniaturization, desired components for enhanced performance, and high throughput for fast prototyping and mass production. Recently, laser-based bubble-pen lithography (BPL) has been developed to enable sub-micron linewidths, in situ synthesis of custom materials, and on-demand patterning for various functional components and devices. BPL exploits Marangoni convection induced by a laser-controlled microbubble to attract, accumulate, and immobilize particles, ions, and molecules onto different substrates. Recent years have witnessed tremendous progress in theory, engineering, and application of BPL, which motivated us to write this review. First, an overview of experimental demonstrations and theoretical understandings of BPL is presented. Next, we discuss the advantages of BPL and its diverse applications in quantum dot displays, biological and chemical sensing, clinical diagnosis, nanoalloy synthesis, and microrobotics. We conclude this review with our perspective on the challenges and future directions of BPL.

Surface-Modified Colloid CdTe/CdS Quantum Dots by a Biocompatible Thiazolidine Derivative as Promising Platform for Immobilization of Glucose Oxidase: Application to Fluorescence Sensing of Glucose

This work focuses on the synthesis of novel modified core-shell CdTe/CdS quantum dots (QDs) and develops as a fluorescence sensor for glucose determination. The (E)-2,2'-(4,4'-dioxo-2,2'-dithioxo-2H,2'H-[5,5'-bithiazolylidene]-3,3'(4H,4'H)-diyl)bis(3- mercaptopropanoic acid) (DTM) as a new derivative of thiazolidine was synthesized and characterized and used to surface-modification of CdTe/CdS QDs. DTM-capped CdTe/CdS QDs used to immobilization of glucose oxidase (GOD). The intensity fluorescence emission of the CdSe/CdS-DTM/GOD is highly sensitive to the concentration of H₂O₂ as a byproduct of the catalytic oxidation of glucose. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 10 nM-0.32 μM under optimized experimental conditions. The limit of detection of this system was found to be 4.3 nM. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, and good sensitivity.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Molecularly imprinted polymers in toxicology: a literature survey for the last 5 years

The science of toxicology dates back almost to the beginning of human history. Toxic chemicals, which are encountered in different forms, are always among the chemicals that should be investigated in criminal field, environmental application, pharmaceutic, and even industry, where many researches have been carried out studies for years. Almost all of not only drugs but also industrial dyes have toxic side and direct effects. Environmental micropollutants accumulate in the tissues of all living things, especially plants, and show short- or long-term toxic symptoms. Chemicals in forensic science can be known by detecting the effect they cause to the body with the similar mechanism. It is clear that the best tracking tool among analysis methods is molecularly printed polymer-based analytical setups. Different polymeric combinations of molecularly imprinted polymers allow further study on detection or extraction using chromatographic and spectroscopic instruments. In particular, methods used in forensic medicine can detect trace amounts of poison or biological residues on the scene. Molecularly imprinted polymers are still in their infancy and have many variables that need to be developed. In this review, we summarized how molecular imprinted polymers and toxicology intersect and what has been done about molecular imprinted polymers in toxicology by looking at the studies conducted in the last 5 years.

Optical chemosensors for the detection of proximally phosphorylated peptides and proteins

Proximal multi-site phosphorylation is a critical post-translational modification in protein biology. The additive effects of multiple phosphosite clusters in close spatial proximity triggers integrative and cooperative effects on protein conformation and activity. Proximal phosphorylation has been shown to modulate signal transduction pathways and gene expression, and as a result, is implicated in a broad range of disease states through altered protein function and/or localization including enzyme overactivation or protein aggregation. The role of proximal multi-phosphorylation events is becoming increasingly recognized as mechanistically important, although breakthroughs are limited due to a lack of detection technologies. To date, there is a limited selection of facile and robust sensing tools for proximal phosphorylation. Nonetheless, there have been considerable efforts in developing optical chemosensors for the detection of proximal phosphorylation motifs on peptides and proteins in recent years. This review provides a comprehensive overview of optical chemosensors for proximal phosphorylation, with the majority of work being reported in the past two decades. Optical sensors, in the form of fluorescent and luminescent chemosensors, hybrid biosensors, and inorganic nanoparticles, are described. Emphasis is placed on the rationale behind sensor scaffolds, relevant protein motifs, and applications in protein biology.

Quantum Dots as Biosensors in the Determination of Biochemical Parameters in Xenobiotic Exposure and Toxins

Quantum dots (QDs) have been exploited for a range of scientific applications where the analytes can be expected to have significant photoluminescent properties. Previously, the applications of QDs as nanosensors for the detection of toxics in biospecimens, especially in cases of poisoning, have been discussed. This review focuses on the applications of QDs as biosensors for the detection of phytotoxins, vertebrate and invertebrate toxins, and microbial toxins present in biospecimens. Further, the role of QDs in the measurement of biochemical parameters of patient/victim as an indirect method of poison detection is also highlighted.

Targeted Bioimaging of Cancer Cells Using Free Folic Acid-Sensitive Molybdenum Disulfide Quantum Dots through Fluorescence "Turn-Off"

In the present study, a proficient way for targeted bioimaging of folate receptor (FR)-positive cancer cells using free folic acid (FA)- and MoS₂ QD-based nanoprobes is discussed along with its advantages over the preparation of orthodox direct FA-nanoprobe bioconjugates for the imaging. The water-soluble MoS₂ QDs of size 4-5 nm with cysteine functionalization are synthesized by a simplistic bottom-up hydrothermal method. The as-prepared MoS₂ QDs exhibit the blue emission with the highest emission intensity at 444 nm upon excitation of 370 nm. The MoS₂ QDs are too sensitive toward FA to produce an effective and stable nanofiber structure through supramolecular interaction, which demonstrates ∼97% quenching of fluorescence. Moreover, the high selectivity and sensitivity of MoS₂ QDs toward FA make the MoS₂ QD-based nanoprobe an appropriate candidate for FA-targeted "turn-off" imaging probes for in vivo study of FA-pretreated FR-overexpressed cancer cells. It is obvious from the confocal microscopy images that the FA-pretreated B16F10 cancer cells show higher population of dimmed fluorescence compared to untreated cancer cells and HEK-293 normal cells. The flow cytometry study quantitatively reveals the significant difference of the geometric mean of fluorescence between FA-pretreated and untreated B16F10 cancer cells. Hence, these MoS₂ QD-based nanoprobes can be applied as potential nanoprobes for the prediagnosis of cancer through targeted bioimaging.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Quantum dots as nanosensors for detection of toxics: a literature review

Great advances have been made in sensor-based methods for chemical analysis owing to their high sensitivity, selectivity, less testing time, and minimal usage of chemical reagents. Quantum Dots (QDs) having excellent optical properties have been thoroughly explored for variety of scientific applications wherein light plays an important role. In recent years, there have been an increasing number of publications on the applications of QDs as photoluminescent nanosensors for the detection of chemicals and biomolecules. However, there has been hardly any publication describing the use of QDs in the detection of various toxic chemicals at one place. Hence, a literature survey has been made on the applications of QDs as chemosensors for the detection of gaseous, anionic, phenolic, metallic, drug-overdose, and pesticide poison so as to open a new perspective towards the role of sensors in analytical toxicology. In this review, the QD-based analysis of biospecimens for poison detection in clinical and forensic toxicology laboratories is highlighted.

FRET probe for selective and sensitive detection of vitamin A by cadmium free quantum dots (ZnS)

Vitamin A as a powerful antioxidant plays an important role in human body functions including bone remodeling regulation, healthy immune system and cell growth reproduction. An accurate determination of vitamin A is taken into consideration because of its importance for human health. In this paper, we reported a fluorescence resonance energy transfer (FRET) probe, MPS-capped ZnS QDs, for sensitive and selective detection of vitamin A. The colloidal MPS-capped ZnS QDs were prepared from Zinc acetate and sodium sulfide by employing 3-mercaptopropyltrimethoxysilane (MPS) molecules as the stabilizer or capping agent at the pH condition of 10. The synthesized MPS-capped ZnS QDs were characterized by means of FT-IR, UV-Vis, DLS, and TEM techniques. The sensing behavior of MPS-capped ZnS QDs for selective and sensitive detection of vitamin A, vitamin B₂, vitamin B₆, vitamin E, vitamin K, vitamin H, vitamin D₃ and vitamin C was investigated using fluorescence spectroscopy. The detection mechanism involves photoinduced charge transfer from the surface of ZnS QDs to Vitamin resulting in the fluorescence quenching of ZnS QDs followed by nonradiative fluorescence resonance energy transfer. An excellent selectivity was observed for vitamin A versus other tested species. A linear relationship was observed between the fluorescence intensity of MPS-capped ZnS QDs and the concentration of vitamin A in the range of 3.33-36.66 μM with detection limit of 1.062 μM.

Heterostructural CsPbX3-PbS (X = Cl, Br, I) Quantum Dots with Tunable Vis-NIR Dual Emission

Perovskite and chalcogenide quantum dots (QDs) are important nano semiconductors. It has been a challenge to synthesize heterostructural QDs combining perovskite and chalcogenide with tailorable photoelectronic properties. In this report, heterostructural CsPbX₃-PbS (X = Cl, Br, I) QDs were successfully synthesized via a room temperature in situ transformation route. The CsPbX₃-PbS QDs show a tunable dual emission feature with the visible and near-infrared (NIR) photoluminescence (PL) corresponding to CsPbX₃ and PbS, respectively. Typically, the formation and evolution of the heterostructural CsPbBr₃-PbS QDs with reaction time was investigated. Femtosecond transient absorption spectroscopy (TAS) was applied to illuminate the exciton dynamics in CsPbBr₃-PbS QDs. The mild synthetic method and TAS proved perovskite to PbS energy transfer may pave the way toward highly efficient QD photovoltaic and optoelectronic devices.

Microwave-assisted Synthesis of N,S-co-carbon Dots as Switch-on Fluorescent Sensor for Rapid and Sensitive Detection of Ascorbic Acid in Processed Fruit Juice

To achieve a rapid, sensitive, and economical method for the detection of ascorbic acid (AA) in the presence of Fe³⁺, a nitrogen and sulfur co-doped carbon dots (N,S-co-CDs) based fluorescence sensing system was developed. In this work, N,S-co-CDs were successfully synthesized via a one-step microwave-assisted method within 2.5 min using ammonium citrate and L-cysteine as precursors. The fluorescence of N,S-co-CDs was quenched (off ) by Fe³⁺ through a static-quenching mechanism. Subsequently, the fluorescence was recovered (on) after introducing AA into the quenched system, which was attributed to the reduction effect of AA for Fe³⁺. Therefore, a switch-on sensor (N,S-co-CDs/Fe³⁺ system) was developed for AA detection. Under optimal conditions, the limit of detection (LOD) of 2.31 μmol/L for AA was obtained over a linear range from 0 to 150 μmol/L. Furthermore, the proposed sensing method was successfully applied to detect AA in processed fruit juice with satisfactory results. The most important is that the sensor derived from a microwave-assisted method has simple and eco-friendly synthesis processes, is rapid, and has high detection efficiency. Therefore, such a switch-on sensor may be a promising candidate sensor for AA detection in processed fruit samples.

Development of a quantum dot molecularly imprinted polymer sensor for fluorescence detection of atrazine

Atrazine is a common agricultural pesticide which has been reported to occur widely in surface drinking water, making it an environmental pollutant of concern. In the quest for developing sensitive detection methods for pesticides, the use of quantum dots (QDs) as sensitive fluorescence probes has gained momentum in recent years. QDs have attractive and unique optical properties whilst coupling of QDs to molecularly imprinted polymers (MIPs) has been shown to offer excellent selectivity. Thus, the development of QD@MIPs based fluorescence sensors could provide an alternative for monitoring herbicides like atrazine in water. In this work, highly fluorescent CdSeTe/ZnS QDs were fabricated using the conventional organometallic synthesis approach and were then encapsulated with MIPs. The CdSeTe/ZnS@MIP sensor was characterized and applied for selective detection of atrazine. The sensor showed a fast response time (5 min) upon interaction with atrazine and the fluorescence intensity was linearly quenched within the 2-20 mol L^-1 atrazine range. The detection limit of 0.80 × 10^-7  mol L^-1 is comparable to reported environmental levels. Lastly, the sensor was applied in real water samples and showed satisfactory recoveries (92-118%) in spiked samples, hence it is a promising candidate for use in water monitoring.

Specific quantification of atropine using molecularly imprinted polymer on graphene quantum dots

Herein, development of a reliable and specific fluorometric assay was disclosed for the sensitive detection of atropine. The method was designed using the surface molecularly imprinted polymer on high fluorescent graphene quantum dots (GQDs). Molecularly imprinted polymer capped GQDs (MIP-GQDs) were prepared through the common co-polymerization reaction of 3-(3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS), act as the main functional and cross-linking monomers, respectively. The used template for this reaction was atropine. The created blue luminescent MIP-GQDs composite, which had a great affinity to adsorb atropine from the sample solution, could lead to a notable fluorescence quenching. In fact, GQDs act as the recognizing antenna for adsorbed atropine into the specific MIP sites. The linear association between the observed quenching effect and atropine concentration was exploited to design a selective assay to the detection of atropine. After optimization process, a linear calibration graph was achieved in the atropine concentration range of 0.5-300 ng mL^-1 with a detection limit of 0.22 ng mL^-1. Exploitation of high specific MIP technique along with high fluorescent GQDs provided a highly selective and sensitive assay for atropine as a model analyte. It was adequately utilized for the analysis of atropine in biological samples.

Quantum dot-decorated semiconductor micro- and nanoparticles: A review of their synthesis, characterization and application in photocatalysis

Quantum dot (QD)-decorated semiconductor micro- and nanoparticles are a new class of functional nanomaterials that have attracted considerable interest for their unique structural, optical and electronic properties that result from the large surface-to-volume ratio and the quantum confinement effect. In addition, because of QDs' excellent light-harvesting capacity, unique photoinduced electron transfer, and up-conversion behaviour, semiconductor nanoparticles decorated with quantum dots have been used widely in photocatalytic applications for the degradation of organic pollutants in both the gas and aqueous phases. This review is a comprehensive overview of the recent progress in synthesis methods for quantum dots and quantum dot-decorated semiconductor composites with an emphasis on their composition, morphology and optical behaviour. Furthermore, various approaches used for the preparation of QD-based composites are discussed in detail with respect to visible and UV light-induced photoactivity. Finally, an outlook on future development is proposed with the goal of overcoming challenges and stimulating further research into this promising field.

A fluorescent sensor based on thioglycolic acid capped cadmium sulfide quantum dots for the determination of dopamine

A fluorescent sensor based on thioglycolic acid-capped cadmium sulfide quantum dots (TGA-CdS QDs) has been designed for the sensitive and selective detection of dopamine (DA). In the presence of dopamine (DA), the addition of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) activates the reaction between the carboxylic group of the TGA and the amino group of dopamine to form an amide bond, quenching the fluorescence of the QDs. The fluorescence intensity of TGA-CdS QDs can be used to sense the presence of dopamine with a limit of detection of 0.68μM and a working linear range of 1.0-17.5μM. This sensor system shows great potential application for dopamine detection in dopamine drug samples and for future easy-to-make analytical devices.

Synthesis, Characterization, and Biodistribution of Quantum Dot-Celecoxib Conjugate in Mouse Paw Edema Model

Increased risk of cardiovascular side effects has been reported with many of the drugs in the market, including nonsteroidal anti-inflammatory drugs (NSAIDs). Hence, it is critical to thoroughly evaluate the biodistribution and pharmacokinetic properties of the drugs. Presently nanotechnology in combination with noninvasive imaging techniques such as magnetic resonance imaging (MRI), computed axial tomography (CAT), and positron emission tomography (PET) provides a better estimate of the spatio-temporal distribution of therapeutic molecules. Optical imaging using quantum dot- (QD-) tagged biological macromolecules is emerging as a fast, economical, sensitive, and safer alternative for theranostic purposes. In the present study, we report the nanoconjugates of mercaptopropionic acid- (MPA-) capped CdTe quantum dots (QDs) and Celecoxib for bio-imaging in carrageenan-induced mouse paw edema model of inflammation. QD-Celecoxib conjugates were characterized by fluorescence, FT-IR, NMR, and zeta-potential studies. In vivo imaging of QD-Celecoxib conjugates showed clear localization in the inflamed tissue of mouse paw within 3 h, with a gradual increase reaching a maximum and a later decline. This decrease of fluorescence in the paw region is followed by an increase in urinary bladder region, suggesting the possible excretion of QD-drug conjugates from mice within 24 h.

Ligand-Capped CdTe Quantum Dots as a Fluorescent Nanosensor for Detection of Copper Ions in Environmental Water Sample

In this work, as a novel fluorescent nano-sensor, a ligand-capped CdTe QDs (CdTe-L QDs) was designed for the detection and quantification of Cu²⁺ ions in environmental water samples. The synthesized QDs were characterized by transmission electron microscopy (TEM), thermo-gravimetric (TG) analysis, Fourier transform infrared (FTIR), UV-Vis spectrophotometry and fluorescence spectroscopy. Optical properties of the produced nanosensor were monitored by UV-Vis and fluorescence spectrophotometry. It was observed that fluorescence intensity of the produced nano-sensor selectively quenched by adding Cu²⁺ ions in comparison to other metal ions tested. Using CdTe-L QDs, a rapid and facile analytical method was developed to determine Cu²⁺ ions in the concentration range of 5.16 ± 0.07 × 10^- 8 mol L^- 1-1.50 ± 0.03 × 10^- 5 mol L^- 1 with a detection limit of 1.55 ± 0.05 × 10^- 8 mol L^- 1. The nanosensor was successfully applied for the determination of Cu²⁺ ions in various water samples, and the results were compared with the standard method. Graphical Abstract.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Novel fluorescent CdTe quantum dot-thymine conjugate-synthesis, properties and possible application

Novel, highly fluorescent cadmium telluride quantum dots conjugated with thymine and stabilized with thioglycolic acid were obtained and characterized. Successful formation of the conjugate was confirmed by elemental analysis, and UV-vis, fluorescence and Fourier transform infrared spectroscopies. Crystal structure and composition of the conjugates were characterized with xray diffraction and x-ray photoelectron spectroscopy. The size of the conjugates was 4-6 nm as demonstrated using atomic force microscopy and high resolution transmission electron microscopy imaging. The plasmon resonance fluorescence band at 540 nm on excitation at 351 nm was observed for these nanoparticles. The intensity of this band increased with the increase in the amount of conjugated thymine with no shift in its position. Based on the fluorescence measurements it was found that the CdTe-thymine conjugate interacted efficiently and selectively not only with adenine, a nucleobase complementary to thymine, but also with adenine-containing modified nucleosides, i.e., 5'-deoxy-5'-(methylthio)adenosine and 2'-O-methyladenosine, the urinary tumor markers which allow monitoring of the disease progression. To the best of our knowledge, as yet, there have been no studies presented in literature on that type of the interaction with CdTe-thymine conjugates. Therefore, the system presented can be considered as a working component of a selective adenine/adenosine biosensor with potential application in cancer diagnosis.

Selective chemiluminescence method for the determination of trinitrotoluene based on molecularly imprinted polymer-capped ZnO quantum dots

A novel molecularly imprinted polymer (MIP) based chemiluminescence (CL) assay is described for the determination of TNT in environmental samples.

Molecularly imprinted polymers on CdS quantum dots for sensitive determination of cefixime after its preconcentration by magnetic graphene oxide

A sensitive and selective method was developed for the simple monitoring of cefixime based on its preconcentration by magnetic Fe₃O₄@SiO₂modified graphene oxide (Fe₃O₄@SiO₂-GO) and fluorimetric detection using molecularly imprinted polymer coated CdS quantum dots (MIP-CdS QDs).

Photoluminescence Architectures for Disease Diagnosis: From Graphene to Thin-Layer Transition Metal Dichalcogenides and Oxides

Ever since the discovery of graphene, increasing efforts have been devoted to the use of this stellar material as well as the development of other graphene-like materials such as thin-layer transition metal dichalcogenides and oxides (TMD/Os) for a variety of applications. Because of their large surface area and unique optical properties, these two-dimensional materials with a size ranging from the micro- to the nanoscale have been employed as the substrate to construct photoluminescence architectures for disease diagnosis as well as theranostics. These architectures are built through the simple self-assembly of labeled biomolecular probes with the substrate material, leading to signal quenching. Upon the specific interaction of the architecture with a target biomarker, the signal can be spontaneously restored in a reversible manner. Meanwhile, by co-loading therapeutic agents and employing the inherent photo-thermal properties of the material substrates, a combined disease imaging and therapy (theranostics) can be achieved. This review highlights the latest advances in the construction and application of graphene and TMD/O based thin-layer material composites for single-target and multiplexed detection of a variety of biomarkers and theranostics. These versatile material architectures, owing to their ease in preparation, low cost and flexibility in functionalization, provide promising tools for both basic biochemical research and clinical applications.

Metal-based quantum dots: synthesis, surface modification, transport and fate in aquatic environments and toxicity to microorganisms

The intense interest in metal-based QDs is diluted by the fact that they cause risks to aquatic environments.

Characterization of amine stabilized CdSe/ZnS core–shell quantum dots by using triarylpyrylium dyes

A new method to study the stabilizing primary amine ligands coordinated to the surface of CdSe/ZnS core–shell quantum dots has been developed.

Construction of biomolecular sensors based on quantum dots

At this post-genomic era, the focus of life science research has shifted from life genetic information to general biofunctions. Biomolecular sensors based on QDs will play an important role in the identification and detection of biomolecules.

Quantification of residual liquid on repellent cotton fabrics after liquid roll off

A new method to detect and quantify any residual liquid left on coated cotton fabrics after liquid roll off using fluorescence microscopy.