Impact of dewatering inorganic coagulants on anaerobic digestion treating food waste leachate

Anaerobic digestion of food waste leachate (FWL) provides a viable solution for waste treatment and energy production. Returning solids from digested sludge to the reactor maintains a high microbial concentration and enhances digestion efficiency. However, this requires coagulants because the digestate has low dewaterability. This study analyzed methane production and microbial communities using biochemical methane potential tests for inorganic coagulants (AlCl3, Al2(SO4)3, FeCl3, and Fe2(SO4)3) in FWL treatment. Cumulative methane production was the highest in the control and decreased in the order of Fe2(SO4)3, AlCl3, FeCl3, and Al2(SO4)3. Iron ions inhibited H2S production while aluminum ions increased it compared to the control group. Despite the absence of significant changes in microbial communities following coagulant injection, a substantial increase in damaged cells was observed. These findings highlight the intricate repercussions of coagulant introduction in anaerobic digestion, emphasizing notable alterations in methane production dynamics and the integrity of microbial cells.

A review of application of combined biochar and iron-based materials in anaerobic digestion for enhancing biogas productivity: Mechanisms, approaches and performance

Strengthening direct interspecies electron transfer (DIET), via adding conductive materials, is regarded as an effective way for improving methane productivity of anaerobic digestion (AD). Therein, the supplementation of combined materials (composition of biochar and iron-based materials) has attracted increasing attention in recent years, because of their advantages of promoting organics reduction and accelerating biomass activity. However, as far as we known, there is no study comprehensively summarizing the application of this kind combined materials. Here, the combined methods of biochar and iron-based materials in AD system were introduced, and then the overall performance, potential mechanisms, and microbial contribution were summarized. Furthermore, a comparation of the combinated materials and single material (biochar, zero valent iron, or magnetite) in methane production was also evaluated to highlight the functions of combined materials. Based on these, the challenges and perspectives were proposed to point the development direction of combined materials utilization in AD field, which was hoped to provide a deep insight in engineering application.

Enhancing sulfate reduction and hydrogen sulfide removal through gas stripping in the acidogenesis phase of a two-phase anaerobic process

This study aims at evaluating two-phase and single-phase reactors for treating sulfate wastewater with low COD/SO₄^2- ratios. Additionally, a new process of gas stripping in an acidogenesis phase is proposed to reduce hydrogen sulfide (H₂S) inhibition and enhance biomethanation. The two-phase performed better than the single-phase in terms of COD removal, CH₄ production and H₂S resistance. After 30 days of stripping, the COD and sulfate degradation rates increased from 85.16% to 91.09% and from 49.39% to 63.07% in the two-phase, respectively. In contrast, without stripping, they were from 79.21% to 64.37% and from 50.26% to 53.15% in the single-phase, respectively. The microbial biodiversity was augmented via stripping, including norank_f__Spirochaetaceae, Petrimonas, Desulfurella and Blvii28_wastewater-sludge_group. Stripping operation enhanced the dissimilatory sulfate reduction, amino acid metabolism and possibly sulfate-dependent anaerobic ammonia oxidation (S-ANAMMOX). This study provides a promising strategy to improve sulfate reduction and reduce H₂S inhibition under a low COD/SO₄^2- ratio.

Advancement of biochar-aided with iron chloride for contaminants removal from wastewater and biogas production: A review

The use of fossil fuels, emission of greenhouse gases (GHG) into the atmosphere, and waste pose a problem to the environment and public health that urgently needs to be dealt with. Among numerous chemical activating agents that can be added to anaerobic digestion (AD) to enhance nutrient removal and increase the quality and quantity of biomethane, iron chloride (FeCl₃) is the one that has the lowest cost and is the most environmentally friendly. This state-of-the-art review aims to revise the influence of FeCl₃ on the Brunauer-Emmett-Teller (BET) surface area of biochar and its ability to increase methane (CH₄) yield and remove contaminants from biogas and wastewater. The novelty of the study is that FeCl₃, an activating agent, can increase the BET surface area of biochar, and its efficacy increases when combined with zinc chloride or phosphoric acid. Regarding the removal of contaminants from wastewater and biogas, FeCl₃ has proven to be an effective coagulant, reducing the chemical oxygen demand (COD) of wastewater and hydrogen sulfide in biogas. The performance of FeCl₃ depends on the dosage, pH, and feedstock used. Therefore, FeCl₃ can increase the BET surface area of biochar and CH₄ yield and remove contaminants from wastewater and biogas. More research is needed to investigate the ability of FeCl₃ to remove water vapor and carbon dioxide during biogas production while accounting for a set of other parameters, including FeCl₃ size.

Effects of Metal and Metal Ion on Biomethane Productivity during Anaerobic Digestion of Dairy Manure

To overcome major limiting factors of microbial processes in anaerobic digestion (AD), metal and metal ions have been extensively studied. However, there is confusion about the effects of metals and metal ions on biomethane productivity in previous research. In this study, Zn and Zn2+ were selected as representatives of metals and metal ions, respectively, to investigate the effects on biomethane productivity. After the metals and metal ions at different concentrations were added to the batch AD experiments under the same mesophilic conditions, a Zn dose of 1 g/L and a Zn2+ dose of 4 mg/L were found to cause the highest biomethane production, respectively. The results indicate that metal (Zn) and metal ion (Zn2+) have different mechanisms to improve AD performance. There may be two possible explanations. To act as conductive materials in interspecies electron transfer (IET), relatively high doses of metals (e.g., 1 g/L of Zn, 10 g/L of Fe) are needed to bridge the electron transfer from syntrophic bacteria to methanogenic archaea in the AD process. As essential mineral nutrients, the AD system requires relatively low doses of metal ions (e.g., 4 mg/L of Zn2+, 5 mg/L of Fe2+) to supplement the component of various enzymes that catalyze anaerobic reactions and transformations. This research will provide clear insight for selecting appropriate amounts of metals or metal ions to enhance biomethane productivity for industrial AD processes.

Effects of Magnetic Biochar Addition on Mesophilic Anaerobic Digestion of Sewage Sludge

As a low-cost additive to anaerobic digestion (AD), magnetic biochar (MBC) can act as an electron conductor to promote electron transfer to enhance biogas production performance in the AD process of sewage sludge and has thus attracted much attention in research and industrial applications. In the present work, Camellia oleifera shell (COS) was used to produce MBC as an additive for mesophilic AD of sewage sludge, in order to explore the effect of MBC on the mesophilic AD process and its enhancement mechanism. Analysis by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectrometry (FTIR), and X-ray diffraction (XRD) further confirmed that biochar was successfully magnetized. The yield of biogas from sewage sludge was enhanced by 14.68-39.24% with the addition of MBC, and the removal efficiency of total solid (TS), volatile solids (VS), and soluble chemical oxygen demand (sCOD) were 28.99-46.13%, 32.22-48.62%, and 84.18-86.71%, respectively. According to the Modified Gompertz Model and Cone Model, the optimum dosage of MBC was 20 mg/g TS. The maximum methane production rate (R_m) was 15.58% higher than that of the control reactor, while the lag-phase (λ) was 43.78% shorter than the control group. The concentration of soluble Fe²⁺ and Fe³⁺ were also detected in this study to analyze the function of MBC for improving biogas production performance from sewage sludge. The biogas production was increased when soluble Fe³⁺ was reduced to soluble Fe²⁺. Overall, the MBC was beneficial to the resource utilization of COS and showed a good prospect for improving mesophilic AD performance.

Can radicals-orientated chemical oxidation improve the reduction of antibiotic resistance genes (ARGs) by mesophilic anaerobic digestion of sludge?

The dissemination of antibiotic resistance genes (ARGs) increases risks towards human health and environmental safety. This work investigates the control of ARGs abundance and bacterial community evolution involved in waste activated sludge (WAS) treatment by chemical conditioning and subsequent mesophilic anaerobic digestion (MAD). The different chemical oxidation processes of ferrous iron-activated oxone and hydrogen peroxide (PMS-Fe²⁺ and H₂O₂-Fe²⁺) and thermal-activated oxone (PMS@80 ℃) were investigated, and the ferric chloride (FeCl₃) and inactivated oxone (PMS) were compared. PMS@80 ℃ decreased the absolute abundance of most ARGs by 10.6-99.3% and that of total ARGs by 66.3%. Interestingly, oxidation pretreatment increased rather than decreased the relative abundance of most ARGs. MAD with PMS@80 ℃ pretreatment increased the absolute abundance of total ARGs by 51.6%, and other MAD processes decreased it by 8.6-47.4%. PMS-Fe²⁺ and PMS@80 ℃ negatively inhibited methane production from 98.3 to 81.7 and 94.4 mL/g VSS in MAD. MAD effluent showed high abundance of Arcobacter genus in the range of 8.1-17.4% upon PMS-based pretreatment, possibly related to sulfur oxidation, nitrate reduction, and blaVEB enrichment. The radicals-orientated chemical oxidation can hardly improve the ARGs elimination by MAD due to the extremely high competitive organics in sludge.

Enhancing anaerobic digestion performance of synthetic brewery wastewater with direct voltage

Different voltages were applied to anaerobic treatment to investigate the enhancement effects and the changes of microbial community structure. The results indicated that the best appropriate voltage was 0.10 V, COD removal increased by 16.72% at first 6 h and cumulative CH₄ production increased by 23.39%. Average methane yield was 15.69% higher than that of control. The sludge measurements indicated that voltage addition could promote the interspecies electron transfer to produce more methane. The strengthening effect of voltage could be sustained for a short period of time when the voltage was removed. Microbial community analysis revealed that the changes of Methanothrix and Methanolinea resulted in higher biogas production. The increases of Smithella and Geobacter improved the possibility of "electronic syntrophism" between microorganisms and promoted the performance of DIET process. The results would provide the theoretical supports for enhancing the anaerobic treatment efficiency by voltages.

Correlations between microbial population dynamics, bamA gene abundance and performance of anaerobic sequencing batch reactor (ASBR) treating increasing concentrations of phenol

The relevant microorganims driving efficiency changes in anaerobic digestion of phenol remains uncertain. In this study correlations were established between microbial population and the process performance in an anaerobic sequencing batch reactor (ASBR) treating increasing concentrations of phenol (from 120 to 1200 mg L^-1). Sludge samples were taken at different operational stages and microbial community dynamics was analyzed by 16S rRNA sequencing. In addition, bamA gene was quantified in order to evaluate the dynamics of anaerobic aromatic degraders. The microbial community was dominated by Anaerolineae, Bacteroidia, Clostridia, and Methanobacteria classes. Correlation analysis between bamA gene copy number and phenol concentration were highly significant, suggesting that the increase of aromatic degraders targeted by bamA assay was due to an increase in the amount of phenol degraded over time. The incremental phenol concentration affected hydrogenotrophic archaea triggering a linear decrease of Methanobacterium and the growth of Methanobrevibacter. The best performance in the reactor was at 800 mg L^-1 of phenol. At this stage, the highest relative abundances of Syntrophorhabdus, Chloroflexus, Smithella, Methanolinea and Methanosaeta were observed and correlated positively with initial degradation rate, suggesting that these microorganisms are relevant players to maintain a good performance in the ASBR.

A need for a standardization in anaerobic digestion experiments? Let's get some insight from meta-analysis and multivariate analysis

An important variability in the experimental results in anaerobic digestion lab test has been reported. This study presents a meta-analysis coupled with multivariate analysis aiming to assess the impact of this experimental variability in batch and continuous operation at mesophilic and thermophilic anaerobic digestion of waste activated sludge. An analysis of variance showed that there was no significant difference between mesophilic and thermophilic conditions in both continuous and batch conditions. Concerning the operation mode, the values of methane yield were significantly higher in batch experiment than in continuous reactors. According to the PCA, for both cases, the methane yield is positive correlated to the temperature rises. Interestingly, in the batch experiments, the higher the volatile solids in the substrate was, the lowest was the methane production, which is correlated to experimental flaws when setting up those tests. In continuous mode, unlike the batch test, the methane yield is strongly (positively) correlated to the organic content of the substrate. Experimental standardization, above all, in batch conditions are urgently necessary or move to continuous experiments for reporting results. The modeling can also be a source of disturbance in batch test.

Effectiveness of piggery waste treatment using microbial fuel cells coupled with elutriated-phased acid fermentation

The present study evaluates the feasibility of increased power generation in microbial fuel cells (MFCs) coupled with acid elutriation fermentation. Raw piggery waste (RPW) and acid elutriation effluents (AEE) of piggery waste were used to generate bioelectricity in single-chambered air-cathode MFCs. RPW-fed MFCs exhibited stable performance after 12-days of operation, generating 540mV of open circuit voltage (OCV). RPW fed-MFCs displayed peak potential and maximal power density (PD_max) of 0.364V and 192mW/m² with 980Ω external resistance (R_ext), respectively. AEE-fed MFCs documented 818mV of maximum OCV. Furthermore, the peak potential and PD_max of 0.329V and 1553mW/m² were generated with 100Ω R_ext, respectively. RPW and AEE-fed MFCs exhibited 84% and 93% substrate removal efficiency, respectively. These findings suggest that a two-stage process including acid elutriation reactor asa pre-fermentation and MFCs greatly enhances substrate removal and electricity generation from piggery waste.

Simultaneous addition of zero-valent iron and activated carbon on enhanced mesophilic anaerobic digestion of waste-activated sludge

The performance of biogas generation and sludge degradation was studied under different zero-valent iron/activated carbon (ZVI/AC) ratios in detail in mesophilic anaerobic digestion of sludge. A good enhancement of methane production was obtained at the 10:1 ZVI/AC ratio, and the cumulative methane production was 132.1 mL/g VS, 37.6% higher than the blank. The methane content at the 10:1 ZVI/AC ratio reached 68.8%, which was higher than the blank (55.2%) and the sludge-added AC alone (59.6%). For sludge degradation, the removal efficiencies of total chemical oxygen demand (TCOD), proteins, and polysaccharides were all the highest at the 10:1 ZVI/AC ratio. The concentration of available phosphorus (AP) decreased after anaerobic digestion process. On the other hand, the concentrations of available nitrogen (AN) and available potassium (AK) increased after the anaerobic digestion process and showed a gradually decreasing trend with increasing ZVI/AC ratio. The concentrations of AN and AK were 2303.1-4200.3 and 274.7-388.3 mg/kg, showing a potential for land utilization.

The synthetic effect on volatile fatty acid disinhibition and methane production enhancement by dosing FeCl3in a sludge thermophilic anaerobic digestion system

A dosage gradient of FeCl₃was adopted and 9.92 mg Fe per g DS was favorable for the disinhibition of VFAs in sludge thermophilic digestion system.

Biostimulation by direct voltage to enhance anaerobic digestion of waste activated sludge

Electrical stimulation has been used conventionally for stimulation of microorganisms, and also as a promising technology to manage wastewater treatment by stimulating microbial metabolism.

Response of sludge fermentation liquid and microbial community to nano zero-valent iron exposure in a mesophilic anaerobic digestion system

NZVI could promote hydrolysis-acidification, facilitate the release of biodegradable compounds and enrich hydrogenotrophic methanogenesis by Clostridia and Methanosarcina.

Toward bioenergy recovery from waste activated sludge: improving bio-hydrogen production and sludge reduction by pretreatment coupled with anaerobic digestion–microbial electrolysis cells

A novel and attractive technology for renewable bioenergy recovery from WAS and sludge reduction has been investigated.