Potential for curdlan recovery from aerobic granular sludge wastewater treatment systems - A review

The aerobic granular sludge (AGS) biotechnology has been explored for wastewater treatment for over two decades. AGS is gaining increased interest due to its enhanced treatment performance ability and the potential for resource recovery from AGS-based wastewater treatment systems. Resource recovery from AGS is a promising approach to sustainable wastewater treatment and attaining a circular economy in the wastewater management industry. Currently, research is at an advanced stage on recovering value-added resources such as phosphorus, polyhydroxyalkanoates, alginate-like exopolysaccharides, and tryptophan from waste aerobic granules. Recently, other value-added resources, including curdlan, have been identified in the aerobic granule matrix, and this may increase the sustainability of biotechnology in the wastewater industry. This paper provides an overview of AGS resource recovery potential. In particular, the potential for enhanced curdlan biosynthesis in the granule matrix and its recovery from AGS wastewater treatment systems is outlined.

Do Curdlan Hydrogels Improved with Bioactive Compounds from Hop Exhibit Beneficial Properties for Skin Wound Healing?

Chronic wounds, among others, are mainly characterized by prolonged inflammation associated with the overproduction of reactive oxygen species and pro-inflammatory cytokines by immune cells. As a consequence, this phenomenon hinders or even precludes the regeneration process. It is known that biomaterials composed of biopolymers can significantly promote the process of wound healing and regeneration. The aim of this study was to establish whether curdlan-based biomaterials modified with hop compounds can be considered as promising candidates for the promotion of skin wound healing. The resultant biomaterials were subjected to an evaluation of their structural, physicochemical, and biological in vitro and in vivo properties. The conducted physicochemical analyses confirmed the incorporation of bioactive compounds (crude extract or xanthohumol) into the curdlan matrix. It was found that the curdlan-based biomaterials improved with low concentrations of hop compounds possessing satisfactory hydrophilicity, wettability, porosity, and absorption capacities. In vitro, tests showed that these biomaterials were non-cytotoxic, did not inhibit the proliferation of skin fibroblasts, and had the ability to inhibit the production of pro-inflammatory interleukin-6 by human macrophages stimulated with lipopolysaccharide. Moreover, in vivo studies showed that these biomaterials were biocompatible and could promote the regeneration process after injury (study on Danio rerio larvae model). Thus, it is worth emphasizing that this is the first paper demonstrating that a biomaterial based on a natural biopolymer (curdlan) improved with hop compounds may have biomedical potential, especially in the context of skin wound healing and regeneration.

Melt processing of paramylon using a water:ionic liquid mixture as plasticizer

Paramylon is a linear β-1,3-glucan produced by the microalgae Euglena Gracilis. Due to its native crystalline structure, involving hexagonally packed triple helices, paramylon is neither water soluble nor thermoplastic. While such properties are generally obtained by chemical modification of paramylon, the present work demonstrates that using ionic liquid/water mixtures as solvents or plasticizers may be an alternative: A mixture of water with cholinium glycinate (40:60) allowed: i) obtaining paramylon solutions at 80 °C, that form reversible ionogels upon cooling at 20 °C, when used as a solvent, and ii) the thermomechanical processing of paramylon below 100 °C by extrusion and hot-press into transparent films, when used as a plasticizer. The thermoplastic paramylon obtained consists of an amorphous matrix, self-reinforced by oriented triple helices packed as nanofibers. This results in a storage modulus ranging from 300 to 450 MPa at 25 °C, depending on the plasticizer content, and in a tensile strain at break of 27 %. For storage times larger than 1 month, a recrystallization of paramylon is observed, with an unidentified crystalline structure different from the native one. Recrystallized samples can be reprocessed into amorphous films by hot pressing.

Introduction of Curdlan Optimizes the Comprehensive Properties of Methyl Cellulose Films

The good oxygen barrier and hydrophobic properties of curdlan (CL) film might be suitable complements for MC film, and its similar glucose unit and thermal-gel character might endow the methyl cellulose (MC)/CL blended system with compatibility and good comprehensive properties. Thus, MC/CL blended films were developed. The effects of MC/CL blend ratios on the microstructures and physical properties of the blends were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), oxygen and water vapor permeability testing, dynamic mechanical analysis (DMA), light transmittance testing, tensile testing, hydrophilic property testing, and water solubility testing. The introduction of CL affected the molecular aggregation and crystallization of the MC molecules, suggesting MC-CL molecular interactions. The cross-sectional roughness of the MC/CL film increased with an increase in CL content, while the surface of the MC/CL 5:5 film was smoother than those of the MC/CL 7:3 and 3:7 films. Only one glass transition temperature, which was between that of the MC and CL films, was observed for the MC/CL 7:3 and MC/CL 5:5 films, indicating the good compatibility of the MC and CL molecules at these two blend ratios. The hydrophobicity and water insolubility increased with the CL content, which was due to the combined effects of more hydrophobic cavities in the CL triple-helix and increased surface roughness. Increased oxygen barrier properties with increasing CL content might be a combined effect of the increased hydrogen bonds and hydrophilic ektexines of the CL triple-helix. The elongations of the blended films were higher than those of the MC film, which might be related to its increased water content. The MC/CL 7:3 and MC/CL 5:5 films retained the good light transmittance and tensile strength of the MC film, which corresponded well to their good compatibility and might be due to the effects of the MC-CL molecular interactions and the relative smooth morphologies. MC/CL 5:5 showed improved water vapor barrier properties, which might be due to its smooth surface morphologies. This research offers new MC based films with improved properties and good compatibility, providing great potential for use as edible coatings, capsules, and packaging materials.

Enzymatically modified quinoa starch-based Pickering emulsion: Effect of enzymolysis and emulsifying conditions

Both the effects of enzymolysis condition on the microstructures and emulsifying property of enzymatic modified quinoa starch (EMQS) and the effects of emulsion formulation on the EMQS based emulsions were investigated. The emulsifying capacity (EC) and stability (ES) of EMQS were positive correlated with enzyme amount (0-2.4 % w/w_starch). The particle sizes of EMQS decreased and its hydrophobicity increased with increasing enzyme amount (0-2.4 % w/w_starch), which were the main reasons for the increasing emulsifying performance of EMQS. With the increasing starch concentration, the EC of the EMQS increased, the oil droplet size of the emulsion decreased. With the oil/water ratios ranging from 1:9 to 6:4, the emulsification index (EI) and oil droplet size of the emulsion increased. EMQS based emulsion had a relatively good stability in the pH range of 2-10. This study lays the foundation for the application of EMQS as a stable clean-label Pickering emulsifier.

Preparation of a novel curdlan/bacterial cellulose/cinnamon essential oil blending film for food packaging application

With the increasing attention to food preservation and environmental safety, there is great pressing demand to explore novel edible and environment-friendly food packaging films. In the present study, a new kind natural curdlan (CD) film was developed with the addition of bacterial cellulose (BC) and cinnamon essential oil (CEO) at 2% and 10% (w/w) amounts, with regard to improve mechanical properties and investigate potential food applications. Our results showed that the tensile strength, the crystallinity and the thermal stability of the CD/BC blending film were improved, while the water vapor permeability, moisture content and the lightness were reduced. Moreover, the CEO addition to the CD/BC film further increased the barrier properties and also mechanical properties. The results of FTIR and XRD were applied for analyzing the potential interactions of the film matrix. Finally, addition of CEO endowed the blending films with good antibacterial activity and antioxidant capacity, which could effectively inhibit the bacterial growth and the lipid oxidation of chilled chicken during the preservative period. Thus, this work demonstrates that the novel CD/BC/CEO blending film with improved mechanical and barrier properties can be of great potential for developing food packaging material for promising applications.

Applications of Microbial Exopolysaccharides in the Food Industry

Exopolysaccharides (EPSs) are high molecular weight polysaccharides secreted by microorganisms in the surrounding environment. In addition to the favorable benefits of these compounds for microorganisms, including microbial cell protection, they are used in various food, pharmaceutical, and cosmetic industries. Investigating the functional and health-promoting characteristics of microbial EPS, identifying the isolation method of these valuable compounds, and their applications in the food industry are the objectives of this study. EPS are used in food industries as thickeners, gelling agents, viscosifiers, and film formers. The antioxidative, anticancer, prebiotic, and cholesterol-lowering effects of some of these compounds make it possible to use them in functional food production.

Preparation and characterization of curdlan/nanocellulose blended film and its application to chilled meat preservation

In this study, to improve the mechanical and thermal properties of curdlan film, a curdlan/nanocellulose (NC) blended film was prepared and characterized for the first time. NC was successfully prepared from microcrystalline cellulose (MCC) with NaOH/urea treatment. The particle size of NC was observed to be 70-140 nm by cryo-electron microscope (cryo-EM). The blended film was prepared by adding the NC to curdlan solution. The tensile strength (TS) of the blended film reached the maximum value of 38.6 MPa, and the elongation at break (EB) was 40%. The DSC curve showed that the heat absorption peak of the film was 240 °C, indicating that the blended film has good temperature stability. Additionally, some other film properties were also improved, including gas barrier properties and transparency. Obvious morphological and molecular differences between the blended film and the pure curdlan film were discovered by SEM and FTIR analysis. Finally, the blended film was used for the preservation of chilled meat and extended the storage time of meat to 12 days. These results provided a theoretical basis for future application and development of biodegradable film.

Rapid Non-Destructive Quantification of Eugenol in Curdlan Biofilms by Electronic Nose Combined with Gas Chromatography-Mass Spectrometry

Eugenol is hepatotoxic and potentially hazardous to human health. This paper reports on a rapid non-destructive quantitative method for the determination of eugenol concentration in curdlan (CD) biofilms by electronic nose (E-nose) combined with gas chromatography-mass spectrometry (GC-MS). Different concentrations of eugenol were added to the film-forming solution to form a series of biofilms by casting method, and the actual eugenol concentration in the biofilm was determined. Analysis of the odor collected on the biofilms was carried out by GC-MS and an E-nose. The E-nose data was subjected to principal component analysis (PCA) and linear discriminant analysis (LDA) in order to establish a discriminant model for determining eugenol concentrations in the biofilms. Further analyses involving the application of all sensors and featured sensors, the prediction model-based partial least squares (PLS) and support vector machines (SVM) were carried out to determine eugenol concentration in the CD biofilms. The results showed that the optimal prediction model for eugenol concentration was obtained by PLS at R²_p of 0.952 using 10 sensors. The study described a rapid, non-destructive detection and quantitative method for determining eugenol concentration in bio-based packaging materials.

Fruit and vegetable waste management: Conventional and emerging approaches

Valorization of Fruit and Vegetable Wastes (FVW) is challenging owing to logistic-related problems, as well as to their perishable nature and heterogeneity, among other factors. In this work, the main existing routes for food waste valorization are critically reviewed. The study focuses on FVW because they constitute an important potential source for valuable natural products and chemicals. It can be concluded that FVW management can be carried out following different processing routes, though nowadays the best solution is to find an adequate balance between conventional waste management methods and some emerging valorization technologies. Presently, both conventional and emerging technologies must be considered in a coordinated manner to enable an integral management of FVW. By doing so, impacts on food safety and on the environment can be minimized whilst wasting of natural resources is avoided. Depending on the characteristics of FVW and on the existing market demand, the most relevant valorization options are extraction of bioactive compounds, production of enzymes and exopolysaccharides, synthesis of bioplastics and biopolymers and production of biofuels. The most efficient emergent processing technologies must be promoted in the long term, in detriment of the conventional ones used nowadays. In consequence, future integral valorization of FVW will probably comprise two stages: direct processing of FVW into value-added products, followed by processing of the residual streams, byproducts and leftover matter by means of conventional waste management technologies.

Effects of carbon sources on production and properties of curdlan using Agrobaterium sp. DH-2

Curdlan has wide potential application in the food and biomedical fields due to its unique thermal gel and biological activity. This study investigated the effect of six sugars including glucose, fructose, lactose, maltose, sucrose and xylose as carbon sources on production and properties of curdlan using Agrobacterium sp. DH-2. The maximum production (38.1 g/L and 37.4 g/L, respectively) and yield (0.58 g curdlan/g sucrose and 0.53 g curdlan/g maltose, respectively) of curdlan were achieved by sucrose and maltose, followed by glucose, fructose, lactose and xylose. Scanning electron micrographs showed that the surface of cells was smooth in strain growth phase, while cells were covered by curdlan matrix acted as a net in the curdlan synthesis phase. The highest glucosyltransferase activity (19.9 U/g biomass) corresponded to the maximum curdlan production using the sucrose medium. The molecular weight and gel strength of curdlan were influenced by the carbon sources. The curdlan from xylose medium resulted in a maximum molecular weight of 1.59 × 10⁶ Da and the highest gel strength of 989.2 g/cm², while the curdlan from sucrose medium resulted in a lowest molecular weight of 1.10 × 10⁶ Da and gel strength of 672.8 g/cm². The high molecular weight of curdlan had high gel strength.

Chemistry and microbial sources of curdlan with potential application and safety regulations as prebiotic in food and health

Curdlan - a homopolysaccharide is comprised of glucose using β-1,3-glycosidic bond and produced by different types of microorganisms as exopolysaccharide. Curdlan gel is stable during freezing and thawing processes which find several applications in food and pharmaceutical industries. It acts as a prebiotic, stabilizer and water-holding, viscosifying and texturing agent. Additionally, curdlan gel is used as a food factor to develop the new products e.g. milk fat substitute, non-fat whipped cream, retorting (freeze-drying) process of Tofu, low-fat sausage, and low-fat hamburger. However, a great variation exists among different countries regarding the regulatory aspects of curdlan as food additives, dietary components or prebiotic substances. Therefore, the present review paper aims to discuss safety issues and the establishment of common guidelines and legislation globally, focusing on the use the applications of curdlan in the food sector including the development of noodles, meat-based products, and fat-free dairy products. This review analyzes and describes in detail the potential of curdlan as a sustainable alternative additive in health and food industries, emphasizing on the chemical composition, production, properties, and potential applications.

Preparation of chitosan/curdlan/carboxymethyl cellulose blended film and its characterization

In this study, to improve the thermal and mechanical properties of chitosan films, a chitosan/curdlan/carboxymethyl cellulose (CS/CD/CMC) ternary blended film was prepared and characterized. To prepare a uniform CS/CD/CMC ternary blended film, an effective method of blending CD with other materials was established as the following conditions: the ternary solution temperature was maintained at 60 °C, and the pH was controlled in the range from 12 to 4. Compared to the pure chitosan, the CS/CD/CMC blended films exhibited better mechanical properties, permeability, and thermal stability. In addition, visible light properties of the ternary blending film were improved. Scanning electron microscope and Fourier transform-infrared spectroscopy analyses indicated good compatibility among the CS, CD and CMC, which led to a corresponding improvement in the properties owing to interactions among the three components in the blending process. So, an effective method of blending CD with CS and CMC was established, and the blending film has good thermal and mechanical properties.

Molecular characteristics of collagen extracted from the starry triggerfish skin and its potential in the development of biodegradable packaging film

Novel biodegradable collagen films from starry trigger skin were fabricated and characterised for food packaging applications.

Characterisation of composite films fabricated from collagen/chitosan and collagen/soy protein isolate for food packaging applications

Composite films fabricated from collagen/chitosan and collagen/soy protein isolate for food packaging applications.