Enhanced Antibacterial Activity of CuS-BSA/Lysozyme under Near Infrared Light Irradiation

The synthesis of multifunctional photothermal nanoagents for antibiotic loading and release remains a challenging task in nanomedicine. Herein, we investigated a simple, low-cost strategy for the preparation of CuS-BSA nanoparticles (NPs) loaded with a natural enzyme, lysozyme, as an antibacterial drug model under physiological conditions. The successful development of CuS-BSA NPs was confirmed by various characterization tools such as transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Lysozyme loading onto CuS-BSA NPs was evaluated by UV/vis absorption spectroscopy, Fourier-transform infrared spectroscopy (FTIR), zeta potential, and dynamic light scattering measurements. The CuS-BSA/lysozyme nanocomposite was investigated as an effective means for bacterial elimination of B. subtilis (Gram-positive) and E. coli (Gram-negative), owing to the combined photothermal heating performance of CuS-BSA and lysozyme release under 980 nm (0.7 W cm-2) illumination, which enhances the antibiotic action of the enzyme. Besides the photothermal properties, CuS-BSA/lysozyme nanocomposite possesses photodynamic activity induced by NIR illumination, which further improves its bacterial killing efficiency. The biocompatibility of CuS-BSA and CuS-BSA/Lysozyme was elicited in vitro on HeLa and U-87 MG cancer cell lines, and immortalized human hepatocyte (IHH) cell line. Considering these advantages, CuS-BSA NPs can be used as a suitable drug carrier and hold promise to overcome the limitations of traditional antibiotic therapy.

Deep Drug Penetration of Nanodrug Aggregates at Tumor Tissues by Fast Extracellular Drug Release

Herein, a new nanodrug of azobenzene-functionalized interfacial cross-linked reverse micelles (AICRM) with 5-fluorouracil loading (5-FU@AICRM) is reported. Upon irradiation with 530 nm light in water, the surface azobenzenes of the nanoparticles change from polar cis-conformation to nonpolar trans-conformation, resulting in the aggregation of 5-FU@AICRM within minutes. Simultaneously, the conformation change unlocks hydrophilic 5-FU with a strong water immigration propensity, allowing them to spray out from the AICRM quickly. This fast release ensures a thorough release of the drug, before the aggregates are internalized by adjacent cells, making it possible to achieve deep tissue penetration. A study of in vivo anticancer activity in A549 tumor-bearing nude mice shows that the tumor inhibition rate (TIR) of 5-FU@AICRM is up to ≈86.2%, 31.6% higher than that of group without green light irradiation and 20.7% higher than that of carmofur (CF, a hydrophobic analog of 5-FU)-loaded AICRM (CF@AICRM), in which CF is released slowly under light irradiation because of its hydrophobicity. Fast drug release upon nanodrug aggregation provides a good solution for balancing the contradiction of "aggregation and penetration" in tumor treatment with nanodrugs.

Stimuli-Responsive Micelles with Detachable Poly(2-ethyl-2-oxazoline) Shell Based on Amphiphilic Polyurethane for Improved Intracellular Delivery of Doxorubicin

Polyurethanes (PUs) have various biomedical applications including controlled drug delivery. However, the incompletely release of drug at tumor sites limits the efficiency of these drug loaded polyurethane micelles. Here we report a novel polymer poly(2-ethyl-2-oxazoline)-SS-polyurethane-SS-poly(2-ethyl-2-oxazoline) triblock polyurethane (PEtOz-PU(PTMCSS)-PEtOz). The hydrophilic pH-responsive poly(2-ethyl-2-oxazoline) was used as an end-block to introduce pH responsiveness, and the hydrophobic PU middle-block was easily synthesized by the reaction of poly (trimethylene carbonate) diol containing disulfide bonds (PTMC-SS-PTMC diol) and bis (2-isocyanatoethyl) disulfide (CDI). PEtOz-PU(PTMCSS)-PEtOz could self-assemble to form micelles (176 nm). The drug release profile of PEtOz-PU(PTMCSS)-PEtOz micelles loaded with Doxorubicin (DOX) was studied in the presence of acetate buffer (10 mM, pH 5.0) and 10 mM dithiothreitol (DTT). The results showed that under this environment, DOX-loaded polyurethane micelles could release DOX faster and more thoroughly, about 97% of the DOX was released from the DOX-loaded PEtOz-PU(PTMCSS)-PEtOz micelle. In addition, fluorescent microscopy and cell viability assays validated that the DOX-loaded polyurethane micelle strongly inhibits the growth of C6 cells, suggesting their potential as a new nanomedicine against cancer.

A Tale of Drug-Carrier Optimization: Controlling Stimuli Sensitivity via Nanoparticle Hydrophobicity through Drug Loading

Interactions between drug molecules, nanocarrier components, and surrounding media influence the properties and therapeutic efficacies of nanomedicines. In this study, we investigate the role that reversible covalent loading of a hydrophobic drug exerts on intra-nanoparticle physical properties and explore the utility of this payload control strategy for tuning the access of active agents and, thereby, the stimuli sensitivity of smart nanomaterials. Glutathione sensitivity was controlled via altering the degree of hydrophobic payload loading of disulfide-linked camptothecin-conjugated sugar-based nanomaterials. Increases in degrees of camptothecin conjugation (f_CPT) decreased aqueous accessibility and reduced glutathione-triggered release. Although the lowest f_CPT gave the fastest camptothecin release, it resulted in the lowest camptothecin concentration. Remarkably, the highest f_CPT resulted in a 5.5-fold improved selectivity against cancer vs noncancerous cells. This work represents an advancement in drug carrier design by demonstrating the importance of controlling the amount of drug loading on the overall payload and its availability.

Anti-P0 Antibody-Conjugated Nanoscale Contrast Agent Targeting the Myelin Sheath for Intraoperative Visible Delineation of Cranial Nerves

The preservation of cranial nerves is a major problem that surgeons encounter when resecting a tumor in the posterior cranial fossa. Most cranial nerve injuries occur because the tight adhesion between the tumor capsule and cranial nerves renders the nerves indistinguishable. In this study, a nerve-specific nanoscale contrast agent was developed for visually distinguishing cranial nerves from the tumor surface in real time. To enable the contrast agent to specifically bind peripheral nerves, a previously reported biodegradable multiblock polyurethane nanoparticle (BMPU NP) was conjugated with an antibody against myelin protein zero (MPZ, P0), which is expressed on myelin sheaths in peripheral nerve fibers. Coomassie brilliant blue G (CB) was encapsulated into the BMPU NP for visual contrast. The CB-BMPU NP specifically stained mouse peripheral nerve fibers blue when directly applied to the nerve surface ex vivo and in vivo. The CB-BMPU NP also achieved satisfactory visual contrast of the trigeminal nerve in a mouse nerve-tissue adhesion model. This study offers new insights for the development of intraoperatively applied nerve-specific contrast agents for delineating cranial nerves adhered to tumors.

Tailor-made chalcogen-rich polycarbonates: experimental and computational insights into chalcogen group-dependent ring opening polymerization

A versatile strategy to poly(chalcogen-carbonate) library is presented by organic base catalytic macrocarbonate polymerization. Polymerization depends sensitively on chalcogen groups.

Dandelion flower-like micelles

Dandelion flower-like micelles (DFMs) were prepared by self-assembly of polycaprolactone (PCL) functionalized surface cross-linked micelles (SCMs). Upon reductive stimuli, the SCMs can be released from the DFMs by non-Brownian motion at an average speed of 19.09 μm s-1. Similar to the property of dandelion flowers dispersing their seeds over a long distance, the DFMs demonstrated enhanced multicellular tumor spheroid (MTS) penetration, a useful property in the treatment of many diseases including cancer, infection-of-biofilm diseases and ocular problems.

pH and reduction dual-responsive micelles based on novel polyurethanes with detachable poly(2-ethyl-2-oxazoline) shell for controlled release of doxorubicin

We describe a biodegradable amphiphilic polyurethane (PU) with disulfide bonds in the main chain [PEtOz-b-PU(SS)-b-PEtOz]. This multi-block PU was synthesized using poly (ε-caprolactone) diol (PCL-SS-PCL) and poly (2-ethyl-2-oxazoline) (PEtOz-OH) as soft segments, and bis (2-isocyanatoethyl) disulfide as the hard segment. Acid-sensitive PEtOz-OH was used as a hydrophilic segment for pH sensitivity. And reduction sensitivity was induced via disulfide bonds incorporated into the hydrophobic poly (ε-caprolactone) segment of the amphiphilic PUs. The system can self-assemble to form micelles responsive to pH and reducing conditions. The properties of the micelle were studied with dynamic light scattering and scanning electron microscopy. Doxorubicin (DOX) was chosen as a model drug. The in vitro release studies showed that PEtOz-b-PU(SS)-b-PEtOz micelle could degrade more rapidly and completely in a reductive and acidic environment [10 mM dl-Dithiothreitol, pH 5.0]. The methyl tetrazolium (MTT) assay and fluorescent microscopy confirmed the cytotoxicity of the DOX-loaded micelles. This work provides a promising dual-responsive drug carrier based on amphiphilic PU to achieve efficient drug delivery.

Facile Transfer of Reverse Micelles from the Organic to the Aqueous Phase for Mimicking Enzyme Catalysis and Imaging-Guided Cancer Therapy

Reverse micelles (RMs) with confined water pools have been applied in many fields. However, the water insolubility of RMs seriously limits the scope of their application, especially those needed to operate in aqueous environments. Here, we report the first successful transfer of RMs from the organic phase to water phase without disturbing their confined water pools and hydrophobic alkyl region. This transfer was achieved by virtue of a mild host-guest interaction between the hydrophobic tails of interfacial cross-linked reverse micelles (ICRMs) and the hydrophobic cavity of (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD). Benefitting from the maintained confined water pools and the hydrophobic scaffold, the obtained water-soluble ICRMs served as multifunctional nanoplatforms for enzyme-mimicking catalysis and image-guided cancer therapy, which were impossible for normal RMs lacking water solubility or confined pool-buried water-soluble nanoparticles without a hydrophobic alkyl chain. This mild transfer approach thus surmounts the application obstacle of RMs and opens up new avenues for their application in aqueous environments.

Facile preparation of biodegradable dual stimuli-responsive micelles from waterborne polyurethane for efficient intracellular drug delivery

A novel waterborne polyurethane based on main chain degradation under acidic and reductive conditions of tumors was synthesized.

Synthesis and Self-Assembly of the pH-Responsive Anionic Copolymers for Enhanced Doxorubicin-Loading Capacity

Polyelectrolyte complex micelles self-assembled from an ionic polymer and oppositely charged small molecules are a promising drug delivery system. In this study, the anionic block copolymers composed of poly(ethylene glycol), poly(ε-caprolactone), and carboxyl modified poly(ε-caprolactone), COOH-PCEC, were designed to encapsulate doxorubicin (DOX) via electrostatic and hydrophobic interactions to form spherical micelles with a particle size of 90-140 nm. The higher payload capacity of these micelles than noncharged micelles of PCL-poly(ethylene glycol)-PCL (PCEC) was achieved, and it was strongly dependent on the composition of the micelles. In vitro drug release studies showed that the release of DOX from the micelles was faster at pH 5.5 than at pH 7.4, which was mainly due to the protonation of carboxyl groups and the solubility of DOX. Studies of intracellular uptake demonstrated that the DOX-loaded micelles could be internalized effectively by HeLa cells. In vitro cytotoxicity revealed that the blank COOH-PCEC micelles had a low cytotoxicity against both L929 and HeLa cells. However, the DOX-loaded micelles inhibited the growth of HeLa cells remarkably, demonstrating their potential for use as an efficient carrier for the delivery of DOX.

Enhanced bioreduction-responsive biodegradable diselenide-containing poly(ester urethane) nanocarriers

Stimuli-responsive nanocarriers have been limited for bench-to-bedside translation mainly because the stimuli sensitivity and responsive rate are not high enough to ensure sufficient drug concentration at the target sites for superior therapeutic benefits. Herein, we reported an enhanced bioreduction-responsive and biodegradable nanocarrier based on the amphiphilic poly(ester urethane) copolymers (PAUR-SeSe) bearing multiple diselenide groups on the backbone. The copolymer could spontaneously self-assemble into stable micelles in aqueous medium with an average diameter of 68 nm, which could be rapidly disassembled in a reductive environment as a result of the reduction-triggered cleavage of diselenide groups. Furthermore, the PAUR-SeSe micelles showed an enhanced drug release profile and cellular uptake compared with the disulfide-containing analogue (PAUR-SS). CCK8 assays revealed that the antitumor activity of DOX-loaded PAUR-SeSe micelles was much higher than that of DOX-loaded PAUR-SS micelles. Besides, the blank micelles and degradation products were nontoxic up to a tested concentration of 50 μg mL^-1. Therefore, the enhanced therapeutic efficacy and good biocompatibility demonstrated that this drug nanocarrier had great potential for smart antitumor drug delivery applications.

Biodegradable polyurethane micelles with pH and reduction responsive properties for intracellular drug delivery

Polyurethane micelles with disulfide linkage located at the interface of hydrophilic shell and hydrophobic core (PU-SS-I) have been shown enhanced drug release profiles. However, the payloads could not be released completely. The occurrence of aggregation of hydrophobic cores upon shedding hydrophilic PEG coronas was considered as the reason for the incomplete release. To verify the above hypothesis and to develop a new polyurethane based micelles with dual stimuli respond properties and controllable location of pH and reduction responsive groups in the PU main chains, a tertiary amine was incorporated into the hydrophobic core PU-SS-I, which resulted polyurethane with both reduction and pH sensitive properties (PU-SS-N). Biodegradable polyurethane with only disulfide linkages located between the hydrophilic PEG segment and the hydrophobic PCL segments (PU-SS-I) and polyurethane with only pH sensitive tertiary amine at the hydrophobic core (PU-N-C) were used as comparisons. Paclitaxel (PTX) was chosen as mode hydrophobic drug to evaluate the loading and redox triggered release profiles of the PU micelles. It was demonstrated that PU-SS-N micelles disassembled instantly at the presence of 10mM GSH and at an acidic environment (pH=5.5), which resulted the nearly complete release (~90%) of the payloads within 48h, while about ~70% PTX was released from PU-SS-I and PU-SS-N micelles at neutral environment (pH=7.4) with the presence of 10mM GSH. The rapid and complete redox and pH stimuli release properties of the PU-SS-N nanocarrier will be a promising anticancer drug delivery system to ensure sufficient drug concentration to kill the cancer cells and to prevent the emergency of MDR. The in vitro cytotoxicity and cell uptake of the PTX-loaded micelles was also assessed in H460 and HepG2 cells.

Magnetic targeted nanoparticles based on β-cyclodextrin and chitosan for hydrophobic drug delivery and a study of their mechanism

Magnetic nanoparticles double coated with β-cyclodextrin and chitosan were prepared for hydrophobic drug delivery, and its related mechanism was discussed.

Glutathione responsive polymers and their application in drug delivery systems

Materials which respond to biological cues are the subject of intense research interest due to their possible application in smart drug delivery vehicles.

Recent advances in hybrid measurement methods based on atomic force microscopy and surface sensitive measurement techniques

This review summaries the recent progress of the combination of optical and non-optical surface sensitive techniques with the atomic force microscopy.

Surface charge switchable and core cross-linked polyurethane micelles as a reduction-triggered drug delivery system for cancer therapy

The core cross-linked polyurethane micelles with redox sensitive and pH-responsive surface charge switchable properties were prepared by using diisocyanates as crosslinkers and studied as anticancer drug carriers.

Fully glutathione degradable waterborne polyurethane nanocarriers: Preparation, redox-sensitivity, and triggered intracellular drug release

Polyurethanes are important class of biomaterials that are extensively used in medical devices. In spite of their easy synthesis, polyurethanes that are fully degradable in response to the intracellular reducing environment are less explored for controlled drug delivery. Herein, a novel glutathione degradable waterborne polyurethane (WPU) nanocarrier for redox triggered intracellular delivery of a model lipophilic anticancer drug, doxorubicin (DOX) is reported. The WPU was prepared from polyaddition reaction of isophorone diisocyanate (IPDI) and a novel linear polyester polyol involving disulfide linkage, disulfide labeled chain extender, dimethylolpropionic acid (DMPA) using dibutyltin dilaurate (DBTDL) as a catalyst. The resulting polyurethane self-assembles into nanocarrier in water. The dynamic light scattering (DLS) measurements and scanning electron microscope (SEM) revealed fast swelling and disruption of nanocarriers under an intracellular reduction-mimicking environment. The in vitro release studies showed that DOX was released in a controlled and redox-dependent manner. MTT assays showed that DOX-loaded WPU had a high in vitro antitumor activity in both HDF noncancer cells and MCF- 7 cancer cells. In addition, it is found that the blank WPU nanocarriers are nontoxic to HDF and MCF-7 cells even at a high concentration of 2mg/mL. Hence, nanocarriers based on disulfide labeled WPU have appeared as a new class of biocompatible and redox-degradable nanovehicle for efficient intracellular drug delivery.

Inspired by nonenveloped viruses escaping from endo-lysosomes: a pH-sensitive polyurethane micelle for effective intracellular trafficking

A multifunctional drug delivery system (DDS) for cancer therapy still faces great challenges due to multiple physiological barriers encountered in vivo. To increase the efficacy of current cancer treatment a new anticancer DDS mimicking the response of nonenveloped viruses, triggered by acidic pH to escape endo-lysosomes, is developed. Such a smart DDS is self-assembled from biodegradable pH-sensitive polyurethane containing hydrazone bonds in the backbone, named pHPM. The pHPM exhibits excellent micellization characteristics and high loading capacity for hydrophobic chemotherapeutic drugs. The responses of the pHPM in acidic media, undergoing charge conversion and hydrophobic core exposure, resulting from the detachment of the hydrophilic polyethylene glycol (PEG) shell, are similar to the behavior of a nonenveloped virus when trapped in acidic endo-lysosomes. Moreover, the degradation mechanism was verified by gel permeation chromatography (GPC). The endo-lysosomal membrane rupture induced by these transformed micelles is clearly observed by transmission electron microscopy. Consequently, excellent antitumor activity is confirmed both in vitro and in vivo. The results verify that the pHPM could be a promising new drug delivery tool for the treatment of cancer and other diseases.

Biodegradable pH-sensitive polyurethane micelles with different polyethylene glycol (PEG) locations for anti-cancer drug carrier applications

Biodegradable pH sensitive polyurethane micelles with a dense brush like coating of PEG were prepared. The PTX-loaded PEG-g-PU-3 micelles exhibited potent cytotoxicity against H460 cancer cells compared to PEG-b-PU-3 and PEG-c-PU-3 micelles.