Amination-modified lignin recovery of aqueous phosphate for use as binary slow-release fertilizer

To address the global phosphorus crisis and solve the problem of eutrophication in water bodies, the recovery of phosphate from wastewater for use as a slow-release fertilizer and to improve the slow-release performance of fertilizers is considered an effective way. In this study, amine-modified lignin (AL) was prepared from industrial alkali lignin (L) for phosphate recovery from water bodies, and then the recovered phosphorus-rich aminated lignin (AL-P) was used as a slow-release N and P fertilizer. Batch adsorption experiments showed that the adsorption process was consistent with the Pseudo-second-order kinetics and Langmuir model. In addition, ion competition and actual aqueous adsorption experiments showed that AL had good adsorption selectivity and removal capacity. The adsorption mechanism included electrostatic adsorption, ionic ligand exchange and cross-linked addition reaction. In the aqueous release experiments, the rate of nitrogen release was constant and the release of phosphorus followed a Fickian diffusion mechanism. Soil column leaching experiments showed that the release of N and P from AL-P in soil followed the Fickian diffusion mechanism. Therefore, AL recovery of aqueous phosphate for use as a binary slow-release fertilizer has great potential to improve the environment of water bodies, enhance nutrient utilization and address the global phosphorus crisis.

Vanadium removal from mining ditch water using commercial iron products and ferric groundwater treatment residual-based materials

Removal of vanadium from liquid waste streams protects the environment from toxic vanadium species and promotes the recovery of the valuable metal. In this study, real mining ditch water was sampled from a closed vanadium mine (V-Fe-Ti oxide deposit, Finland) and used in sorption experiments at prevailing vanadium concentration (4.66-6.85 mg/L) and pH conditions (7.02-7.83). The high concentration of vanadium in the water represents a potential health concern according to the initial risk assessment carried out in this study. Vanadium was efficiently removed using four different iron sorbents: ferric oxyhydroxide with some goethite (CFH-12), poorly crystallized akaganéite (GEH 101), ferric groundwater treatment residual (GWTR), and GWTR-modified peat (GWTR-Peat). Higher dosage (6 g/L with 24 h contact time) and longer contact time (72 h using 1 g/L dosage) resulted in removal efficiencies of higher than 85%. Kinetic data were well represented by the Elovich model while intra-particle diffusion and Boyd models suggested that the sorption process in a real water matrix was significantly controlled by both film diffusion and intra-particle diffusion. Column studies with CFH-12, GEH 101, and GWTR-Peat showed that the breakthrough started earlier with the mining ditch water compared to a synthetic vanadium solution (investigated only with CFH-12), whereas GEH 101 proved to have the best performance in column mode. The Thomas and Yoon-Nelson column models were found to agree with the experimental data fairly well with the 50% breakthrough time being close to the experimental value for all the studied sorbents.

Recent Progress on Adsorption Materials for Phosphate Removal

BACKGROUND

High concentration of phosphate has been threatening human health and the ecosystem. Adsorption is one of high-efficiency and low-cost techniques to reduce the concentration of phosphate. This mini review aims to summarize the recent development of adsorption materials for phosphate removal.

METHOD

We conducted a detailed search of "adsorption of phosphate" in the published papers and the public patents on the adsorbents for phosphate based on Web of Science database in the period from January 1 2012 to December 31 2017. The corresponding literature was carefully evaluated and analyzed.

RESULTS

One hundred and forty one papers and twenty two recent patents were included in this review. An increased trend in scientific contributions was observed in the development of adsorption materials for phosphate removal. Three kinds of promising adsorbents: layered double hydroxides, natural materials, and metal oxides were paid special attention including removal mechanism, performance as well as the relationship between adsorption performance and structure. Both the chemical composition and the morphology play a key role in the removal capacity and rate.

CONCLUSION

The findings of this review confirm the importance of phosphate removal, show the development trend of high-performance and low-cost adsorption materials for phosphate removal, and provide a helpful guide to design and fabricate high-efficiency adsorbents.

Capture of perchlorate by a surface-modified bio-sorbent and its bio-regeneration properties: Adsorption, computations and biofouling

A magnetic amine-crosslinked reed (MACR) was synthesized by an insitu precipitation method and used for perchlorate uptake. The morphological properties of clean MACR, perchlorate-saturated MACR and bio-regenerated MACR samples were determined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. The adsorption capacities of perchlorate by clean and bio-regenerated MACRs were determined. The density functional theory (DFT) method was employed to evaluate the binding free energies between various anions and ammonium/hydroxy groups. The maximum adsorption (Q_max) of perchlorate by MACR was calculated to be 195.5-232.8 mg/g at 30-50 °C. The theoretical computation of adsorption-free energies indicated that ammonium groups were dominant in the process of perchlorate adsorption; other anions, such as [H₂PO₄]^-, [NO₃]^- and [SO₄]^2-, showed relatively higher binding free energies than [ClO₄]^-, which corresponded to the results of competitive adsorption. The spent MACR was then bio-regenerated in a sealed 250-ml conical flask with perchlorate-reducing bacteria (30 °C, 160 rpm) and reached 81.4% of recovery within 3 days. Some hydrophobic macromolecules of extracellular polymeric substances (EPS) might have attached to the surface of MACR, which was validated by the zeta potential, SEM and excitation emission matrix (EEM) fluorescence spectroscopy results.

Highly effective adsorption of xanthene dyes (rhodamine B and erythrosine B) from aqueous solutions onto lemon citrus peel active carbon: characterization, resolving analysis, optimization and mechanistic studies

Erythrosine B (EB) and rhodamine B (RB) dyes that were selected as model of xanthene dyes for dye adsorption from aqueous solution, were removed effectively.

Removal of phosphate and chromium(vi) from liquids by an amine-crosslinked nano-Fe3O4 biosorbent derived from corn straw

A magnetic biocomposite based bio-sorbent (corn straw) was prepared after in situ co-precipitation with Fe²⁺ and Fe³⁺ solutions and amine functionalization.