Agglomerated serum albumin adsorbed protocatechuic acid coated superparamagnetic iron oxide nanoparticles as a theranostic agent

Iron oxide nanoparticles have been one of the most widely used nanomaterials in biomedical applications. However, the incomplete understanding of the toxicity mechanisms limits their use in diagnosis and treatment processes. Many parameters are associated with their toxicity such as size, surface modification, solubility, concentration and immunogenicity. Further research needs to be done to address toxicity-related concerns and to increase its effectiveness in various applications. Herein, colloidally stable nanoparticles were prepared by coating magnetic iron oxide nanoparticles (MIONPs) with protocatechuic acid (PCA) which served as a stabilizer and a linkage for a further functional layer. A new perfusion agent with magnetic imaging capability was produced by the adsorption of biocompatible passivating agent macro-aggregated albumin (MAA) on the PCA-coated MIONPs. PCA-coated MIONPs were investigated using infrared spectroscopy, thermogravimetric analysis and dynamic light scattering while adsorption of MAA was analysed by transmission electron microscopy, Fourier-transform infrared spectroscopy and x-ray diffraction methods. Magnetic measurements of samples indicated that all samples showed superparamagnetic behaviour. Cytotoxicity results revealed that the adsorption of MAA onto PCA-coated MIONPs provided an advantage by diminishing their toxicity against the L929 mouse fibroblast cell line compared to bare Fe₃O₄.

Optimization studies of BTX removal by magnetite coated oleic acid obtained from microwave-assisted synthesis using response surface methodology

Benzene, toluene and xylene (BTX) are volatile organic compounds released into the environment, that require urgent removal to avoid adverse health effects. In this work, the modelling and optimization of the preparation factors for magnetite coated oleic acid (MNP-OA) composite from microwave synthesis using response surface methodology were conducted to maximize BTX removal, and iron content. The influence of five crucial preparation variables: the Fe^3+/Fe²⁺ solution volumes, microwave power, volume of ammonia water (VAW), reaction time and volume of oleic acid (VOA) on the iron content (% Fe), and BTX adsorption capacity were investigated. The analysis of variance results revealed that VOA and VAW were the most influential factors for high % Fe content, and improved BTX removal. The % Fe, and BTX adsorption capacity for MNP-OA composite at optimized experimental conditions were estimated to be 85.57%, 90.02 mg/g (benzene), 90.07 mg/g (toluene), and 96.31 mg/g (xylene).

Kinetic and statistical perspectives on the interactive effects of recalcitrant polyaromatic and sulfur heterocyclic compounds and in-vitro nanobioremediation of oily marine sediment at microcosm level

A halotolerant biosurfactant producer Pseudomonas aeruginosa strain NSH3 (NCBI Gene Bank Accession No. MN149622) was isolated to degrade high concentrations of recalcitrant polyaromatic hydrocarbons (PAHs) and polyaromatic heterocyclic sulfur compounds (PASHs). In biphasic batch bioreactors, the biodegradation and biosurfactant-production activities of NSH3 have been significantly enhanced (p < 0.0001) by its decoration with eco-friendly prepared magnetite nanoparticles (MNPs). On an artificially contaminated sediment microcosm level, regression modeling and statistical analysis based on a 2³ full factorial design of experiments were trendily applied to provide insights into the interactive impacts of such pollutants. MNPs-coated NSH3 were also innovatively applied for nanobioremediation (NBR) of in-vitro diesel oil-polluted sediment microcosms. Gravimetric, chromatographic, and microbial respiratory analyses proved the significantly enhanced biodegradation capabilities of MNPs-coated NSH3 (p < 0.001) and the complete mineralization of various recalcitrant diesel oil components. Kinetic analyses showed that the biodegradation of iso- and n-alkanes was best fitted with a second-order kinetic model equation. Nevertheless, PAHs and PASHs in biphasic batch bioreactors and sediment microcosms followed the first-order kinetic model equation. Sustainable NBR overcome the toxicity of low molecular weight hydrocarbons, mass transfer limitation, and steric hindrance of hydrophobic recalcitrant high molecular weight hydrocarbons and alkylated polyaromatic compounds.

Superparamagnetic Iron Oxide Nanoparticles Decorated Mesoporous Silica Nanosystem for Combined Antibiofilm Therapy

A crucial challenge to face in the treatment of biofilm-associated infection is the ability of bacteria to develop resistance to traditional antimicrobial therapies based on the administration of antibiotics alone. This study aims to apply magnetic hyperthermia together with controlled antibiotic delivery from a unique magnetic-responsive nanocarrier for a combination therapy against biofilm. The design of the nanosystem is based on antibiotic-loaded mesoporous silica nanoparticles (MSNs) externally functionalized with a thermo-responsive polymer capping layer, and decorated in the outermost surface with superparamagnetic iron oxide nanoparticles (SPIONs). The SPIONs are able to generate heat upon application of an alternating magnetic field (AMF), reaching the temperature needed to induce a change in the polymer conformation from linear to globular, therefore triggering pore uncapping and the antibiotic cargo release. The microbiological assays indicated that exposure of E. coli biofilms to 200 µg/mL of the nanosystem and the application of an AMF (202 kHz, 30 mT) decreased the number of viable bacteria by 4 log10 units compared with the control. The results of the present study show that combined hyperthermia and antibiotic treatment is a promising approach for the effective management of biofilm-associated infections.

Iron oxide-mediated photo-Fenton catalysis in the inactivation of enteric bacteria present in wastewater effluents at neutral pH

The pressure on natural water resources associated with increasing water scarcity highlights the value of using reclaimed water through the development of efficient and environmentally friendly treatment technologies. In this work, the use of magnetic nanoparticles in photo-Fenton catalysis for water disinfection was considered to inactivate natural enteric bacteria present in municipal wastewater effluents under white light and neutral pH. The most recommended ranges were evaluated in key variables such as the loading and composition of nanoparticles (NPs), hydrogen peroxide (H₂O₂) concentration, the light source (UV and visible) and treatment time were evaluated in wastewater disinfection expressed in terms of total coliforms and Escherichia coli colony forming units (CFU). The magnetic separation of NPs allowed the disinfection process to be carried out in different cycles, facilitating the recovery of the nanocatalyst and avoiding its discharge with the treated effluent.

Magnetite Hydrosols with Positive and Negative Surface Charge of Nanoparticles: Stability and Effect on the Lifespan of Drosophila melanogaster

This paper presents sols of uncoated and citric acid-coated Fe₃O₄ nanoparticles obtained by a combination of coprecipitation and sonochemistry methods. A stable concentrated CA-Fe₃O₄ sol synthesized by a combination of coprecipitation with an inconvenient Fe²⁺/Fe³⁺ ratio, modification with citric acid and US treatment was obtained for the first time. A comparative analysis of the composition and morphology of nanoparticles was performed. The sols are oppositely charged and behave as a typical ferrofluid. The citric acid-modified sol is aggregatively stable over wider ranges of pH and electrolyte concentration, but it becomes less stable with the temperature increase. DLVO calculations showed that steric repulsion forces are a vital factor contributing to increased aggregative stability in a modified Fe₃O₄ sol. The experiments have revealed the magneto-optical effect in a modified Fe₃O₄ sol with an electrolyte concentration of 0.025-0.075 M caused by a high potential barrier and a deep secondary minimum in pairwise interaction curves. The "pK spectroscopy" mathematical model to describe the potentiometric curves of synthesized magnetite sols was used for the first time. According to potentiometric titration, the ions of the electrolyte practically do not contribute to formation of a surface charge in modified Fe₃O₄ with a change in pH due to blocking the magnetite surface by citric acid molecules. Drosophila melanogaster was used as a model to show that Fe₃O₄ in chronic exposure has a low toxic effect.

RF hyperthermia by encapsulated Fe3O4 nanoparticles induces cancer cell death via time-dependent caspase-3 activation

Aim: To explore the optimum temperature for cancer cell death using magnetic hyperthermia (MH), which in turn will affect the mode of cell death. Method: The focus of this study is to improve upon the existing methodology for the synthesis of chitosan encapsulated Fe3O4. MH was done at different temperatures. The cell death pathway was explored using flow cytometry and western blot. Results: Coated Fe3O4 exhibited low cytotoxicity, high stability and heating efficiency. MH at 43°C was the optimum temperature for robust cell death. Cell death pathway suggested that during the initial stages of recovery, apoptosis was the main mode of cell death. While at later stages, major apoptosis and minor necrosis were observed. Conclusion: It is important to find out the long-term effect of hyperthermia treatment on cancer cells and their consequences on surrounding healthy cells.

Hydrothermal synthesis and photocatalytic activity of butterfly-like CaTiO3 dendrites with dominant {101} facets

Novel butterfly-like CaTiO₃ dendrites dominantly bounded by {101} facets have been synthesized via a conventional hydrothermal by using tetramethylammonium hydroxide (TMAH) as a mineralizer and surface modifier. The wing-branches of the butterfly-like CaTiO₃ dendrites are composed of primary block tetragonal plates with dominant {101} facets overlapping and ranking around the stem of 〈131〉 directions in the same plane belonging to the group of {101}. With the basis of the experimental results and the lattice structure, a possible formation mechanism of the butterfly-like CaTiO₃ dendrites has been discussed and proposed. The preferential adsorption of the organic [Formula: see text] ions released by the ionization of TMAH on {101} planes suppresses the deposition of the calcium titanate species on {101} planes, which induces the formation of the primary block tetragonal plates and their overlapping as well as ranking around 〈131〉 direction along {101} planes, resulting in the butterfly-like CaTiO₃ dendrites bounded with {101} facets. The investigation on the degradation of rhodamine-B demonstrates, due to the dominant exposition of the {101} facets, the butterfly-like CaTiO₃ dendrites display superior photocatalytic activity of more than four time that of CaTiO₃ microcuboids bounded with smart {101} and (010) facets.

Fabrication of Magnetic Pd/MOF Hollow Nanospheres with Double-Shell Structure: Toward Highly Efficient and Recyclable Nanocatalysts for Hydrogenation Reaction

MNPs@MOF catalysts obtained by encapsulating metal nanoparticles (NPs) into metal-organic frameworks (MOFs) show fascinating performance in heterogeneous catalysis. The improvement of catalytic activity and reusability of MNPs@MOF catalysts has been a great challenge for a long time. Herein, we demonstrate well-designed Pd/MOFs, featuring hollow double-shell structure and magnetic property, exhibiting high reusability, efficient catalytic activity, and size selectivity for hydrogenation reaction. The as-synthesized Pd/MOF, denoted as Void nFe₃O₄@Pd/ZIF-8@ZIF-8, possesses diverse functional structural features. The hollow cavity can improve mass transfer; superparamagnetic Fe₃O₄ NPs embedded in the inner MOF shell can enhance the separation and recyclability; Pd NPs are highly dispersed in the matrix of the inner MOF shell, and the outer MOF shell acts as a protector to prevent the leaching of Pd NPs and a sieve to achieve size selectivity. As a proof of concept, the Void nFe₃O₄@Pd/ZIF-8@ZIF-8 catalyst exhibited excellent performance for the hydrogenation of styrene at room temperature. The activity only reduced 10% after 20 cycles for the higher conversions (>90%), and the lower conversion only decreased 3.6% (from 32.5 to 28.9% conversion) after twenty consecutive cycles, indicating the good and intrinsic reusability of the catalyst. The proposed structure in this work provides a strategy to effectively improve the reusability of MNPs@MOF catalysts, which would increase their practical applications.

Novel Technology for the Removal of Brilliant Green from Water: Influence of Post-Oxidation, Environmental Conditions, and Capping

Chemical dyes are used in a wide range of anthropogenic activities and are generally not biodegradable. Hence, sustainable recycling processes are needed to avoid their accumulation in the environment. A one-step synthesis of Fe_core-maghemite_shell (Fe-MM) for facile, instantaneous, cost-effective, sustainable, and efficient removal of brilliant green (BG) dye from water has been reported here. The homogenous and monolayer type of adsorption is, to our knowledge, the most efficient, with a maximum uptake capacity of 1000 mg·g^-1, for BG on Fe-MM. This adsorbent was shown to be efficient in occurring in time-scales of seconds and to be readily recyclable (ca. 91%). As iron/iron oxide possesses magnetic behavior, a strong magnet could be used to separate Fe-MM coated with BG. Thus, the recycling process required a minimum amount of energy. Capping Fe-MM by hydrophilic clay minerals further enhanced the BG uptake capacity, by reducing unwanted aggregation. Interestingly, capping the adsorbent by hydrophobic plastic (low-density polyethylene) had a completely inverse effect on clay minerals. BG removal using this method is found to be quite selective among the five common industrial dyes tested in this study. To shed light on the life cycle analysis of the composite in the environment, the influence of selected physicochemical factors (T, pH, hν, O₃, and NO₂) was examined, along with four types of water samples (melted snow, rain, river, and tap water). To evaluate the potential limitations of this technique, because of likely competitive reactions with metal ion contaminants in aquatic systems, additional experiments with 13 metal ions were performed. To decipher the adsorption mechanism, we deployed four reducing agents (NaBH₄, hydrazine, LiAlH₄, and polyphenols in green tea) and NaBH₄, exclusively, favored the generation of an efficient adsorbent via aerial oxidation. The drift of electron density from electron-rich Fe_core to maghemite shells was attributed to be responsible for the electrostatic adsorption of N⁺ in BG toward Fe-MM. This technology is deemed to be environmentally sustainable in environmental remediation, namely, in waste management protocol.

Enhanced removal of basic violet 10 by heterogeneous sono-Fenton process using magnetite nanoparticles

The removal of basic violet 10 (BV10), which is known as a cationic dye, from aqueous solution was studied by employing a heterogeneous sono-Fenton process over the nano-sized magnetite (Fe₃O₄) which had been prepared by the milling of magnetite mineral using a high-energy planetary ball milling process. The magnetite samples were characterized using the X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and inductively couple plasma mass spectrometer (ICP-MS). It was found that the catalytic activity of the ball-milled magnetite sample was enhanced along with the improvement in its physicochemical properties; also, the ball-milled magnetite of 6 h displayed the highest catalytic activity in BV10 removal by the heterogeneous sono-Fenton process as compared with that for 4 h (66.12% after 120 min) and 2 h (48% after 120 min).The effect of operational parameters, namely, pH solution, catalyst dosage, the initial H₂O₂ concentration, ultrasonic power and the initial BV10 concentration, on the removal efficiency (RE%) of BV10 was investigated. The optimum conditions for the BV10 RE% were: the pH value of 3, the catalyst dosage of 1.5 g L^-1, the initial H₂O₂ concentration of 36 mM, the ultrasonic power of 450 W L^-1, and the initial BV10 concentration of 30 mg L^-1. The RE% of BV10 was 75.94% at these conditions after the reaction time of 120 min. The trapping experiments revealed that OH radicals were the dominant oxidative species, but O₂^-/HO₂ radicals also had a partial role in the removal of BV10.The reusability of the magnetite nanoparticles revealed about 28% decrease in the removal efficiency within five consecutive runs. The results obtained through GC-MS analysis also confirmed the efficient removal of BV10 molecules in the aqueous solution during the process.

Fabrication of magnetite nanocrystals in alcohol/water mixed solvents: catalytic and colloid property evaluation

Size tailoring in alcohol–water mixed solvents produces small magnetite nanocrystals with appreciably high catalytic activities that form ultrastable colloids when suspended in water.