Mechanical properties, and in vitro biocompatibility assessment of biomimetic dual layered keratin/ hydroxyapatite scaffolds

A novel biomimetic dual layered keratin/hydroxyapatite (keratin/HA) scaffold was designed using iterative freeze-drying technique. The prepared scaffolds were studied using several analytical techniques to better understand the biological, structural, and mechanical properties. The developed multilayered, interconnected, porous keratin scaffold with different hydroxyapatite (HA) content in the outer and inner layer, mimics the inherent gradient structure of alveolar bone. SEM studies showed an interconnected porous architecture of the prepared scaffolds with seamless integration between the upper and lower layers. The incorporation of HA improved the mechanical properties keratin/HA scaffolds. The keratin/HA scaffolds exhibited superior mechanical properties in terms of Young's modulus and compressive strength in comparison to pure keratin scaffolds. The biocompatibility studies suggested that both keratin and keratin/HA scaffolds were cyto-compatible, in terms of cell proliferation. Furthermore, it showed that both the tested materials can served as an ideal substrate for the differentiation of Saos-2 cells, leading to mineralization of the extracellular matrix. In summary, ionic liquid based green technique was employed for keratin extraction to fabricate keratin/HA scaffolds and our detailed in vitro investigations suggest the great potential for these composite scaffolds for bone tissue engineering in future.

Polysaccharide-bioceramic composites for bone tissue engineering: A review

Limitations associated with conventional bone substitutes such as autografts, increasing demand for bone grafts, and growing elderly population worldwide necessitate development of unique materials as bone graft substitutes. Bone tissue engineering (BTE) would ensure therapy advancement, efficiency, and cost-effective treatment modalities of bone defects. One way of engineering bone tissue scaffolds by mimicking natural bone tissue composed of organic and inorganic phases is to utilize polysaccharide-bioceramic hybrid composites. Polysaccharides are abundant in nature, and present in human body. Biominerals, like hydroxyapatite are present in natural bone and some of them possess osteoconductive and osteoinductive properties. Ion doped bioceramics could substitute protein-based biosignal molecules to achieve osteogenesis, vasculogenesis, angiogenesis, and stress shielding. This review is a systemic summary on properties, advantages, and limitations of polysaccharide-bioceramic/ion doped bioceramic composites along with their recent advancements in BTE.

Mussel-Inspired Gold Nanoparticle and PLGA/L-Lysine-g-Graphene Oxide Composite Scaffolds for Bone Defect Repair

PURPOSE

Insufficient biological activity heavily restricts the application and development of biodegradable bone implants. Functional modification of bone implants is critical to improve osseointegration and bone regeneration.

METHODS

In this study, L-lysine functionalized graphene oxide (Lys-g-GO) nanoparticles and polydopamine-assisted gold nanoparticle (AuNPs-PDA) coatings were applied to improve the biological function of PLGA scaffold materials. The effects of Lys-g-GO nanoparticles and AuNPs-PDA functionalized coatings on the physicochemical properties of PLGA scaffolds were detected with scanning electron microscopy (SEM), contact angle measurement, and mechanical testing instruments. In vitro, the effects of composite scaffolds on MC3T3-E1 cell proliferation, adhesion, and osteogenic differentiation were studied. Finally, a radial defect model was used to assess the effect of composite scaffolds on bone defect healing.

RESULTS

The prepared AuNPs-PDA@PLGA/Lys-g-GO composite scaffolds exhibited excellent mechanical strength, hydrophilicity and antibacterial properties. In vitro, this composite scaffold can significantly improve osteoblast adhesion, proliferation, osteogenic differentiation, calcium deposition, and other cell behaviour. In vivo, this composite scaffold can significantly promote the new bone formation and collagen deposition in the radial defect site and presented good biocompatibility.

CONCLUSION

The combination of bioactive nanoparticles and surface coatings shows considerable potential to enhance the osseointegration of bone implants.

Assessment of nano-hydroxyapatite and poly (lactide-co-glycolide) nanocomposite microspheres fabricated by novel airflow shearing technique for in vivo bone repair

A novel airflow shearing method was introduced to prepare microspheres efficiently with precisely control of microsphere size and homogeneity. The effects of technical parameters in the formation of the microspheres, such as solution concentration, nozzle size and airflow strength, were investigated. By optimizing the technical parameters (8% PLGA concentration, 27-32 G nozzle size, 6-8 l/min airflow strength), nano-hydroxyapatite and poly(lactide-co-glycolide) nanocomposite (nHA/PLGA) microspheres with a diameter around 250 μm and up to 40 wt% nHA content was prepared successfully. Especially, the microspheres possessed revealed great homogeneity and unique "acorn" appearance with two sides: A hard smooth side as well as a crumpled rough side, generated in the preparation process. Furthermore, the nHA/PLGA microspheres' potential application in bone tissue engineering was studied. In vitro, enhanced proliferation and osteogenic differentiation of the MC3T3-E1 cells was observed on as-prepared nHA/PLGA microspheres with high nHA content. In vivo, the BV/TV value of the microspheres with 20 wt% nHA was up to 75% and similar to the clinical products' performance. Moreover, beside high nHA content, the rough porous surface leads to bone ingrowth, which plays an important role in accelerating bone repair. Therefore, airflow shearing method could be an effective approach to fabricate biocompatible microsphere, and the as-prepared microspheres showed unique surface state and bone repair ability and making them as potential candidates for bone tissue engineering and bone implantation clinical applications.

Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering

Growth factors play a critical role in tissue repair and regeneration. However, their clinical success is limited by their low stability, short half-life, and rapid diffusion from the delivery site. Supraphysiological growth factor concentrations are often required to demonstrate efficacy but can lead to adverse reactions, such as inflammatory complications and increased cancer risk. These issues have motivated the development of delivery systems that enable sustained release and controlled presentation of growth factors. This review specifically focuses on bioconjugation strategies to enhance growth factor activity for bone, cartilage, and osteochondral applications. We describe approaches to localize growth factors using noncovalent and covalent methods, bind growth factors via peptides, and mimic growth factor function with mimetic peptide sequences. We also discuss emerging and future directions to control spatiotemporal growth factor delivery to improve functional tissue repair and regeneration.

Stem Cell Seeded and Silver Nanoparticles Loaded Bilayer PLGA/PVA Dressings for Wound Healing

Antibacterial activity and promoting wound healing are two important characteristics of ideal dressings. The previous work has successfully prepared a stem cell seeded polyvinyl alcohol (PVA) hydrogel dressing, which could promote wound healing by active factors secreted from the dressing. However, a lack of antibacterial activity might limit its better application. In this study, a photo-active gelatin (Az-Gel) modified stem cell seeded bilayer PVA hydrogel dressings with silver nanoparticles loaded poly(lactic-co-glycolic acid) (PLGA) electrospinning films (Ag-PLGA) in it is prepared. The physical properties of the dressings show the dressings are mechanically enhanced by the addition of Ag-PLGA film. The addition of Ag-PLGA film does not alter the moisture content of PVA, but extends the moisture of the dressing. Obviously, antibacterial activity is observed and Ag-PLGA/PVA scaffold is biocompatible and low toxic to murine dermal fibroblasts (NIH-3T3). When seeded with Adipose-derived stem cells (ADSCs), bioactive factors secreted by ADSCs could penetrate the dressing and promote cell growth and wound healing. It is speculated that the stem cells seeded bilayer dressing would be of great potential for skin tissue engineering, because of its antibacterial activity and safe application of stem cells.

Patterned Polyvinyl Alcohol Hydrogel Dressings with Stem Cells Seeded for Wound Healing

Polyvinyl alcohol (PVA) hydrogel and stem cell therapy have been widely used in wound healing. However, the lack of bioactivity for PVA and security of stem therapy limited their application. In this study, an adipose-derived stem cells (ADSCs)-seeded PVA dressing (ADSCs/PVA) was prepared for wound healing. One side of the PVA dressing was modified with photo-reactive gelatin (Az-Gel) via ultraviolet (UV) irradiation (Az-Gel@PVA), and thus ADSCs could adhere, proliferate on the PVA dressings and keep the other side of the dressings without adhering to the wound. The structure and mechanics of Az-Gel@PVA were determined by scanning electron microscopy (SEM) and material testing instruments. Then, the adhesion and proliferation of ADSCs were observed via cell counts and live-dead staining. Finally, in vitro and in vivo experiments were utilized to confirm the effect of ADSCs/PVA dressing for wound healing. The results showed that Az-Gel was immobilized on the PVA and showed little effect on the mechanical properties of PVA hydrogels. The surface-modified PVA could facilitate ADSCs adhesion and proliferation. Protein released tests indicated that the bioactive factors secreted from ADSCs could penetrated to the wound. Finally, in vitro and in vivo experiments both suggested the ADSCs/PVA could promote the wound healing via secreting bioactive factors from ADSCs. It was speculated that the ADSCs/PVA dressing could not only promote the wound healing, but also provide a new way for the safe application of stem cells, which would be of great potential for skin tissue engineering.

Aloin promotes osteogenesis of bone-marrow-derived mesenchymal stem cells via the ERK1/2-dependent Runx2 signaling pathway

Osteoporosis is characterized by low bone mass and the degeneration of bone structure, conditions which increase the risk of fracture. Aloin has been shown to affect bone metabolism, but its role in osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) remains unclear. The aim of our study was to determine whether aloin promotes the proliferation and osteogenic differentiation of BMSCs and, if so, whether it acts via activation of the ERK1/2-Runx2 signaling pathway. We found that the different concentrations of aloin tested had no obvious cytotoxic effects on the viability of BMSCs. Under osteogenic induction conditions, aloin increased cellular alkaline phosphatase activity, promoted BMSC mineralization, and increased osteogenic-related gene expression. In addition, treating the BMSCs with the signal transduction inhibitor PD98059 (ERK1/2) effectively attenuated Runx2 activation in these cells and also suppressed osteoblastic differentiation. Overall, our study demonstrates that aloin promotes osteogenic differentiation of BMSCs through activation of the ERK1/2-Runx2 signaling pathway.

In situ polymerization of poly(γ-benzyl-l-glutamate) on mesoporous hydroxyapatite with high graft amounts for the direct fabrication of biodegradable cell microcarriers and their osteogenic induction

Large-scale cell culture for cell expansion in tissue engineering is currently a major focus of research. One method to achieve better cell amplification is to utilize microcarriers. In this study, different amounts of poly(γ-benzyl-l-glutamate) (PBLG) (from 11 wt% to 50 wt%) were grafted on mesoporous hydroxyapatite (MHA) by the in situ ring opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA), and biodegradable and biocompatible PBLG-g-MHA microcarriers were directly fabricated using the oil-in-water (O/W) solvent-evaporation technique for bone tissue engineering. The amount of grafted PBLG could be controlled by adjusting the feed ratio of MHA and BLG-NCA. The relationships between sphere morphology and graft amount or solution concentration were explored. Furthermore, cytological assays were performed to evaluate the biological properties of the PBLG-g-MHA microcarriers. For a solution concentration of 3% (w/v) and PBLG graft amounts of 33 wt% and 50 wt%, the microspheres could be harvested with optimal spherical shapes. In vitro cell culture revealed that the PBLG-g-MHA microspheres had favorable properties for cell proliferation and significantly enhanced the osteogenic differentiation of MC3T3-E1 cells and bone matrix formation.

Synergistic delivery of bFGF and BMP-2 from poly(l-lactic-co-glycolic acid)/graphene oxide/hydroxyapatite nanofibre scaffolds for bone tissue engineering applications

One of the goals of bone tissue engineering is to create scaffolds with excellent biocompatibility, osteoinductive ability and mechanical properties.

Enhanced cell proliferation and osteogenic differentiation in electrospun PLGA/hydroxyapatite nanofibre scaffolds incorporated with graphene oxide

One of the goals of bone tissue engineering is to mimic native ECM in architecture and function, creating scaffolds with excellent biocompatibility, osteoinductive ability and mechanical properties. The aim of this study was to fabricate nanofibrous matrices by electrospinning a blend of poly (L-lactic-co-glycolic acid) (PLGA), hydroxyapatite (HA), and grapheme oxide (GO) as a favourable platform for bone tissue engineering. The morphology, biocompatibility, mechanical properties, and biological activity of all nanofibrous matrices were compared. The data indicate that the hydrophilicity and protein adsorption rate of the fabricated matrices were significantly increased by blending with a small amount of HA and GO. Furthermore, GO significantly boosted the tensile strength of the nanofibrous matrices, and the PLGA/GO/HA nanofibrous matrices can serve as mechanically stable scaffolds for cell growth. For further test in vitro, MC3T3-E1 cells were cultured on the PLGA/HA/GO nanofbrous matrices to observe various cellular activities and cell mineralization. The results indicated that the PLGA/GO/HA nanofibrous matrices significantly enhanced adhesion, and proliferation in MCET3-E1 cells and functionally promoted alkaline phosphatase (ALP) activity, the osteogenesis-related gene expression and mineral deposition. Therefore, the PLGA/HA/GO composite nanofibres are excellent and versatile scaffolds for applications in bone tissue regeneration.

Enhancing Cell Proliferation and Osteogenic Differentiation of MC3T3-E1 Pre-osteoblasts by BMP-2 Delivery in Graphene Oxide-Incorporated PLGA/HA Biodegradable Microcarriers

Lack of bioactivity has seriously restricted the development of biodegradable implants for bone tissue engineering. Therefore, surface modification of the composite is crucial to improve the osteointegration for bone regeneration. Bone morphogenetic protein-2 (BMP-2), a key factor in inducing osteogenesis and promoting bone regeneration, has been widely used in various clinical therapeutic trials. In this study, BMP-2 was successfully immobilized on graphene oxide-incorporated PLGA/HA (GO-PLGA/HA) biodegradable microcarriers. Our study demonstrated that the graphene oxide (GO) facilitated the simple and highly efficient immobilization of peptides on PLGA/HA microcarriers within 120 min. To further test in vitro, MC3T3-E1 cells were cultured on different microcarriers to observe various cellular activities. It was found that GO and HA significantly enhanced cell adhesion and proliferation. More importantly, the immobilization of BMP-2 onto the GO-PLGA/HA microcarriers resulted in significantly greater osteogenic differentiation of cells in vitro, as indicated by the alkaline phosphate activity test, quantitative real-time polymerase chain reaction analysis, immunofluorescence staining and mineralization on the deposited substrates. Findings from this study revealed that the method to use GO-PLGA/HA microcarriers for immobilizing BMP-2 has a great potential for the enhancement of the osseointegration of bone implants.

Development and characterization of heparin-immobilized polycaprolactone nanofibrous scaffolds for tissue engineering using gamma-irradiation

Polycaprolactone (PCL) has been considered a useful material for orthopedic devices and osseous implants because of its biocompatibility and bone-forming activity.

Tethering of rhBMP-2 upon calcium phosphate cement via alendronate/heparin for localized, sustained and enhanced osteoactivity

rhBMP-2 was tethered on surface of calcium phosphate cement via alendronate–heparin. This novel delivery system can concurrently satisfy high bioactive immobilization and sustainable release of rhBMP-2, and consequently induce rapid bone regeneration.

Serum-free culturing of human mesenchymal stem cells with immobilized growth factors

Growth factors were immobilized with photo-reactive gelatin and used for serum-free human mesenchymal stem cell (hMSC) culturing.

Enhanced proliferation and osteogenic differentiation of MC3T3-E1 pre-osteoblasts on graphene oxide-impregnated PLGA–gelatin nanocomposite fibrous membranes

Currently, combining biodegradable polymeric scaffolds with living cells for bone repair has received significant attention.