Porous ionic liquids: synthesis and application

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Non-cationic hyper-crosslinked ionic polymers with hierarchically ordered porous structures: facile synthesis and applications for highly efficient CO2 capture and conversion

Hyper-crosslinked porous ionic polymers (HCPIPs) have garnered significant attention due to their unique ionic properties and high specific surface areas. However, the limited variety of monomers, low ionic density, and difficulty in functionalization restrict their development. Herein, a series of functionalized non-cationic HCPIPs with high ionic density are designed and directly synthesized via an innovative and straightforward approach - anion (and cation) hyper-crosslinking of tetraphenylborate-based ionic liquids (ILs). These HCPIPs offer controllable hydroxyl group content (0-2.40 mmol g-1), high IL content (1.20-1.78 mmol g-1), and large specific surface area (636-729 m2 g-1) with hierarchically ordered porous structures. These HCPIPs demonstrate exceptional CO2 adsorption capacities and CO2/N2 adsorption selectivities, reaching up to 2.68-3.01 mmol g-1 and 166-237, respectively, at 273 K and 1 bar. Furthermore, these ionic porous materials serve as highly efficient heterogeneous catalysts for CO2 cycloaddition to epoxides under mild conditions (1 bar CO2, 60-80 °C, 12-24 h). Notably, the CO2 adsorption performances and catalytic activities of these HCPIPs are regulated by the hydroxyl groups within their structures, with enhancements observed as the number of hydroxyl groups increases. This work presents a facile and widely applicable method for constructing high-performance and task-specific HCPIPs.

Tunable temperature-responsive photonic ionogels with dual signals output

Photonic ionogels with dual electrical and optical output have been intensively studied. However, tunable temperature-responsive photonic ionogel assembled by thermosensitive nanogels has not been studied yet. Herein, an innovative approach to fabricate photonic ionogels has been developed for smart wearable devices with tunable temperature sensitivity and structural color. Firstly, poly(isopropylacrylamide-r-phenylmaleanilic acid) P(NIPAm-r-NPMA) nanogels self-assemble into photonic crystals in 2-hydroxyethyl acrylate (HEA), water, and the ionic liquid of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. And then robust photonic ionogels are developed through a polymerization of 2-hydroxyethyl acrylate crosslinked by poly(ethylene glycol) diacrylate (PEGDA). The incorporation of the ionic liquid, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, enhances the mechanical strength of photonic ionogels and tunes the temperature-sensitivity of the ionogels, making them adaptable to various environmental conditions. The findings demonstrate that these ionogels can serve dual functions in smart wearable devices, combining electrical and optical signal outputs due to the conductivity of the ionic liquid and structural color from the nanogel assembly. The resultant photonic ionogels exhibit exceptional substrate adhesion, mechanical stability, and fast resilience. More significantly, the nanogels within these ionogels serve as the building blocks of photonic crystals (PCs) endow with angle-independent coloration and enhance stretchability beyond 200 %, while the stretchability of the ionogles without the nanogels is only about 100 %. Our photonic ionogels with tunable temperature-sensitivity and dual outputs will open an avenue to the development of the innovative smart wearable devices.

Porous ionic liquids for oxidative desulfurization influenced by electrostatic solvent effect

Developing a highly efficient strategy for the stabilization of the solid-liquid interface is a persistent pursuit for researchers. Herein, porous ionic liquids based on UiO-66 (Zr) porous materials were synthesized and applied to the selective desulfurization catalysis, which integrates the permanent pores of porous solids with the exceptional properties of ionic liquids. Results show that porous ionic liquids possess high activity and selectivity for dibenzothiophene. Experimental analysis and density functional theory calculations revealed that the ionic liquids moiety served as an extractant to enrich dibenzothiophene into the porous ionic liquids phase through the π···π and CH···π interactions. Additionally, the electrostatic solvent effect in the porous ionic liquids contributes to the stabilization solid-liquid interface, which was favorable for UiO-66 moiety to catalytically activate hydrogen peroxide (H2O2) to generate ·OH radicals, and subsequently oxidized dibenzothiophene to the corresponding sulfone. It is hoped that the development of porous ionic liquids could pave a new route to the stabilization of the solid-liquid interface for catalytic oxidation.

Tailoring Type III Porous Ionic Liquids for Enhanced Liquid-Liquid Two-Phase Catalysis

Porous Ionic Liquids (PILs) have gained attention but facing challenges in catalysis, especially in liquid-liquid two-phase reactions due to limited catalytic sites and hydrophilicity control. This work engineered a Type III PILs (PILS-M) using zeolitic imidazolate framework-8 (ZIF-8) confined phosphomolybdic acid (HPMo) as the microporous framework and N-butyl pyridine bis(trifluoromethane sulfonyl) imide ionic liquid ([Bpy][NTf2]) as the solvent. The PILS-M not only combines the advantages of traditional ionic liquids and microporous frameworks, including excellent extraction, high dispersion of catalytically active species, remarkable stability, etc., but also can make the inner surface of ZIF-8 turned to be hydrophilic that favors the contact between aqueous hydrogen peroxide oxidant and catalytically active sites for the promotion of catalytic performance in reactive extractive desulfurization (REDS) processes of fuel oils. This study demonstrates Type III PILs' potential as catalysts for sustainable chemical processes, offering insights into versatile PILs applications in diverse fields.

Constructing protic porous ionic liquids via one-step coupling neutralization reaction for extraction-adsorption coupled desulfurization

Porous ionic liquids (PILs) offer a distinctive combination of liquid-like fluidity and solid porosity, making them well-suited for various applications including separation, catalysis, and energy storage. Nevertheless, the design limitations and complex synthesis processes have hindered the development of PILs. Here, the one-step coupling neutralization reaction (OCNR) method has been first proposed for the controllable synthesis of functionalized protic porous ionic liquids (PPILs). Specifically, three types of PPILs have been synthesized based on tuning the position of the corona amino functional groups. The results indicate the crucial role of protic ion pairs in the formation of pure liquid PPILs with low viscosity. The extraction efficiency has obviously increased after introducing the porous materials from 38.5% to 51.9%. The results showed PPILs play good extraction-adsorption coupled desulfurization (EADS) performance. The density functional theory (DFT) results show that both the protic ion pairs and the porous structure have significant roles in EADS, with the former offering CH···π interactions, while the latter provides hydrogen bonding (CH···O) interactions. Ultimately, the strategy simplifies the synthesis process, providing a new idea for the directional design of low-viscosity PILs with specific functions.

Gas Permeation through Mechanically Resistant Self-Standing Membranes of a Neat Amorphous Organic Cage

The synthesis and characterization of a novel film-forming organic cage and of its smaller analogue are here described. While the small cage produced single crystals suitable for X-ray diffraction studies, the large one was isolated as a dense film. Due to its remarkable film-forming properties, this latter cage could be solution processed into transparent thin-layer films and mechanically stable dense self-standing membranes of controllable thickness. Thanks to these peculiar features, the membranes were also successfully tested for gas permeation, reporting a behavior similar to that found with stiff glassy polymers such as polymers of intrinsic microporosity or polyimides. Given the growing interest in the development of molecular-based membranes, for example for separation technologies and functional coatings, the properties of this organic cage were investigated by thorough analysis of their structural, thermal, mechanical and gas transport properties, and by detailed atomistic simulations.

In-situ synthesis of ionic liquid-based-carbon quantum dots as fluorescence probe for hemoglobin detection

Carbon quantum dots (CQDs) have emerged as a potential fluorescent probe in bio/analytical chemistry in the present decade. The optical characteristics of CQDs may be tuned by their functional groups, which can also be used to selectively produce stable bonds with target molecules. Along with them, ionic liquids (ILs) are now demonstrating their important relevance in the field of pharmaceuticals for the creation of potent therapeutics. In the article, we have discussed the use of high fluorescent ILs-decorated-CQDs (CQDs-IM@OTf) as a straightforward and quick-acting fluorescence probe for sensitive and precise hemoglobin (Hb) determination with minimum detectability of 6.7 nM. The proposed mechanism behind this involves static mode of quenching which leads to the formation of a ground state complex [CQDs-IM@OTf-Hb complex] between the Hb protein and the drug. Despite the fact that Hb can quench the fluorescence of CQDs due to the inner filter effect (IFE) of the protein, which effects both the excitation and emission spectra of the CQDs, the addition of H₂O₂ improved the sensitivity of Hb detection. The present assay predicated on Hb interaction with H₂O₂, which produces reactive oxygen species such as hydroxyl (OH^.) and superoxide (O₂^.-) radicals under heme degradation and/or iron release from Hb. The subsequent reaction of hydroxyl radicals with CQDs, which acts as a strong oxidising agent, causes a high fluorescence quenching. The designed fluorescence probe was used to measure Hb in the concentration range of 3-90 nM with a precise detection limit of 0.33 nM. The quantification of hemoglobin (Hb) in diluted human blood samples is done using this observation.

POLITAG-M-F as Heterogeneous Organocatalyst for the Waste-Minimized Synthesis of β-Azido Carbonyl Compounds in Batch and under Flow Conditions

We herein report a waste minimization protocol for the β-azidation of α,β-unsaturated carbonyl compounds using TMSN3. The selection of the appropriate catalyst (POLITAG-M-F), in combination with the reaction medium, resulted in enhanced catalytic efficiency and a low environmental footprint. The thermal and mechanical stability of the polymeric support allowed us to recover the POLITAG-M-F catalyst for up to 10 consecutive runs. The CH3CN:H2O azeotrope has a 2-fold positive effect on the process, increasing the efficiency of the protocol and minimizing waste generation. Indeed, the azeotropic mixture, used as a reaction medium and for the workup procedure, was recovered by distillation, leading to an easy and environmentally friendly procedure for product isolation in high yield and with a low E-factor. A comprehensive evaluation of the environmental profile was performed by the calculation of different green metrics (AE, RME, MRP, 1/SF) and a comparison with other literature available protocols. A flow protocol was defined to scale-up the process, and up to 65 mmol of substrates were efficiently converted with a productivity of 0.3 mmol/min.

Imperative persistent interaction analysis of anticancer noscapine-ionic liquid with calf thymus DNA

In this study, we have shown the interaction between opium poppy alkaloid noscapine-based ionic liquid [Pip-Nos]OTf and ct-DNA using UV-visible absorption spectroscopy, fluorescence spectroscopy, CD, and computational studies. The absorption spectra showed a hypochromic shift with no shift in the absorption maxima suggesting groove or electrostatic binding. Fluorescence spectra showed an enhancement in fluorescence emission suggesting that the probable mode of binding should be groove binding. Ethidium bromide (EB) competitive and Ionic strength study showed the absence of intercalative and electrostatic modes of interaction. Further, CD analysis of ct-DNA suggested a groove binding mode of interaction of [Pip-Nos]OTf with ct-DNA. [Pip-Nos]OTf displayed a strong binding with the target ct-DNA with a molecular docking score of -41.47 kJ/mol with all 3D coordinates and full conformation. Also, molecular binding contact analyses depicted the stable binding of drug and ct-DNA with potential hydrogen bonds and hydrophobic interactions. The structural superimposition dynamics analysis showed the stable binding of [Pip-Nos]OTf with the ct-DNA model through RMSD statistics. Moreover, the ligand interaction calculations revealed the involvement of large binding energy along with a high static number of molecular forces including the hydrogen bonds and hydrophobic interactions in their complexation. These significant results report the potency of [Pip-Nos]OTf and its important futuristic role in cancer therapeutics.

Practical considerations in the design and use of porous liquids

The possibility of creating well-controlled empty space within liquids is conceptually intriguing, and from an application perspective, full of potential. Since the concept of porous liquids (PLs) arose several years ago, research efforts in this field have intensified. This review highlights the design, synthesis, and applicability of PLs through a thorough examination of the current state-of-the-art. Following a detailed examination of the fundamentals of PLs, we examine the different synthetic approaches proposed to date, discuss the nature of PLs, and their pathway from the laboratory to practical application. Finally, possible challenges and opportunities are outlined.

One-pot construction of nitrogen-rich polymeric ionic porous networks for effective CO2 capture and fixation

Facile preparation of ionic porous networks (IPNs) with large and permanent porosity is highly desirable for CO₂ capture and transformation but remains a challenge. Here we report a one-pot base-mediated construction of nitrogen-rich IPNs through a combination of nucleophilic substitution and quaternisation chemistry from H-imidazole. This strategy, as proven by the model reactions of 1H-imidazole or 1-methyl-1H-imidazole with cyanuric chloride, allows for fine regulation of porosity and physicochemical properties, leading to nitrogen-rich IPNs featuring abundant ionic units and radicals. The as-prepared networks, termed IPN-CSUs, efficiently capture CO₂ (80.1 cc g^-1 at 273 K/1 bar) with an ideal CO₂/N₂ selectivity of 139.7. They can also effectively catalyse the cycloaddition reaction between CO₂ and epoxides with high yields of up to 99% under mild conditions (0.1 MPa, 298 K), suggesting their possible applications in the fields of both selective molecular separation and conversion. Unlike the previously known strategies generally involving single coupling chemistry, our strategy combining two coupling routes in one pot appears to be unique and potentially applicable to other building blocks.

Abnormal Enhanced Free Ions of Ionic Liquids Confined in Carbon Nanochannels

Revealing the structure and behavior of confined ionic liquids (ILs) is essential for their applications in green chemical processes. Here, we explore the electroconductivity (σ) and ionic correlation of imidazole ILs confined in graphene nanochannels via joint molecular dynamics simulation and theoretical analysis. The ideal and actual σ of ILs are first calculated, showing a growing tendency and up to the bulk value as the nanochannel size ranges from 1 to 10 nm. To account for the ionic correlation, the ionicity was determined by the ratio of the actual to ideal σ, reflecting the average fraction of free ions in the confined ILs. Amazingly, the ionicity of all three ILs shows an abnormal changing tendency, which first increases and reaches the maximum at 2 nm and then decreases to the bulk value. The conformational analysis, pair dissociating energy, and residence time are further obtained, proving that the abnormal enhanced ionicity should be attributed to the structure reconstruction of ILs near the graphene wall. The analytical model of ionicity herein can guide the rational design of efficient IL-based nanoporous electrodes and solid catalysts.

"Giant" Nitrogen Uptake in Ionic Liquids Confined in Carbon Pores

Ionic liquids are well known for their high gas absorption capacity. It is shown that this is not a solvent constant, but can be enhanced by another factor of 10 by pore confinement, here of the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate (EmimOAc) in the pores of carbon materials. A matrix of four different carbon compounds with micro- and mesopores as well as with and without nitrogen doping is utilized to investigate the influence of the carbons structure on the nitrogen uptake in the pore-confined EmimOAc. In general, the absorption is most improved for IL in micropores and in nitrogen-doped carbon. This effect is so large that it is already seen in TGA and DSC experiments. Due to the low vapor pressure of the IL, standard volumetric sorption experiments can be used to quantify details of this effect. It is reasoned that it is the change of the molecular arrangement of the ions in the restricted space of the pores that creates additional free volume to host molecular nitrogen.

An In Situ Coupling Strategy toward Porous Carbon Liquid with Permanent Porosity

An in situ coupling approach is used to fabricate the porous carbon liquid with permanent porosity by directly dispersing hollow carbon nanospheres in polymerized ionic liquids. It is a kind of homogenous and stable type III porous liquid at room temperature. Because of the well-preserved permanent porosity, this unique porous carbon liquid is capable of absorbing the largest quantity of carbon dioxide than the reference PILs and solid carbon liquid, thus, can function as a promising candidate for application in gas storage. More importantly, this approach not only provides an easy method to tune the properties of those specific porous liquids, but also is suitable for fabricating other porous liquid based on varied porous structures (e.g., porous carbon nitride, porous boron nitride, and polymer with intrinsic microporosity), thus paving a viable path for the rational design and synthesis of novel porous liquids with functional properties for specific applications.

A facile fabrication of a multi-functional and hierarchical Zn-based MOF as an efficient catalyst for CO2 fixation at room-temperature

Multi-functional and hierarchical Zn-MOF was rapidly synthesized by room-temperature stirring using an organic amine as a protonation agent and exhibited remarkable improvement for CO₂ cycloaddition to bulky epoxides.

Multi-Interactions in Ionic Liquids for Natural Product Extraction

Natural products with a variety of pharmacological effects are important sources for commercial drugs, and it is very crucial to develop effective techniques to selectively extract and isolate bioactive natural components from the plants against the background of sustainable development. Ionic liquids (ILs) are a kind of designable material with unique physicochemical properties, including good thermal stability, negligible vapor pressure, good solvation ability, etc. ILs have already been used in pharmaceuticals for extraction, purification, drug delivery, etc. It has been reported that multi-interactions, like hydrogen bonding, hydrophobic interactions, play important roles in the extraction of bioactive components from the plants. In this review, recent progress in the understanding of scientific essence of hydrogen bonding, the special interaction, in ILs was summarized. The extraction of various natural products, one important area in pharmaceutical, by conventional and functional ILs as well as the specific roles of multi-interactions in this process were also reviewed. Moreover, problems existing in bioactive compound extraction by ILs and the future developing trends of this area are given, which might be helpful for scientists, especially beginners, in this field.

Molecular simulation on the stability and adsorption properties of choline-based ionic liquids/IRMOF-1 hybrid composite for selective H2S/CO2 capture

The compatibility and performance of an Isoreticular Metal-Organic Frameworks (IRMOF-1) impregnated with choline-based ionic liquids (ILs) for selective adsorption of H₂S/CO₂, were studied by molecular dynamics (MD) simulation. Cholinium alanate ([Chl][Ala]) was nominated as the suitable IL for impregnation into IRMOF-1, consistent with the low RMSD values (0.546 nm, 0.670 nm, 0.776 nm) at three IL/IRMOF-1 w/w ratios (W_IL/IRMOF-1 = 0.4, 0.8, and 1.2). The [Chl]⁺ and [Ala]^- ion pair was located preferentially around the carboxylate group within the IRMOF-1 framework, with the latter interacting strongly with the host than the [Chl]⁺. Results of radius of gyration (Rg) and root mean square displacement (RMSD) revealed that a ratio of 0.4 w/w of IL/IRMOF-1 (Rg = 1.405 nm; RMSD = 0.546 nm) gave the best conformation to afford an exceptionally stable IL/IRMOF-1 composite. It was discovered that the IL/IRMOF-1 composite was more effective in capturing H₂S and CO₂ compared to pristine IRMOF-1. The gases adsorbed in higher quantities in the IL/IRMOF-1 composite phase compared to the bulk phase, with a preferential adsorption for H₂S, as shown by the uppermost values of adsorption ( [Formula: see text] = 17.954 mol L^-1 bar^-1) and an adsorption selectivity ( [Formula: see text] = 43.159) at 35 IL loading.

Theoretical prediction of the SO2 absorption by hollow silica based porous ionic liquids

As an acid gas, sulfur dioxide (SO₂) has caused serious pollution to the environment. Therefore, SO₂ capture is crucial. The silica-based porous ionic liquid possesses not only the porosity and high specific surface area of hollow silica, but also the fluidity of the liquid. The absorption mechanism of SO₂ absorption by porous ionic liquids through density functional theory (DFT) was systematically studied in this paper. First six kinds of absorption sites were predicted, and then various analyses such as structure, energy, and electrostatic potential analysis (ESP) were employed after optimization. The results show that SO₂ has the strongest adsorptive interaction between the canopy and the silica sphere. In addition, the main force between the porous ionic liquid and SO₂ is hydrogen bonding and π-hole bonding. Finally, by increasing the degree of polymerization of the canopy, that is, increasing the number of ether groups, will be beneficial to the absorption of SO₂.

Heterogeneous Catalysis with the Participation of Ionic Liquids

This mini-review briefly describes the recent progress in the design and development of catalysts based on the presence of ionic liquids. In particular, the focus was on heterogeneous systems (supported ionic liquid (IL) phase catalysts (SILPC), solid catalysts with ILs (SCILL), porous liquids), which due to the low amounts of ionic liquids needed for their production, eliminate basic problems observed in the case of the employment of ionic liquids in homogeneous systems, such as high price, high viscosity, and efficient isolation from post-reaction mixtures.

Nanocage formation and structural anomalies in imidazolium ionic liquid glasses governed by alkyl chains of cations

Intriguing nanostructuring anomalies have been recently observed in imidazolium ionic liquids (ILs) near their glass transition points, where local density around a nanocaged solute progressively grows up with temperature. Herewith, we for the first time demonstrate experimentally and theoretically, that these anomalies are governed by alkyl chains of cations and crucially depend on their length. Electron Paramagnetic Resonance (EPR) spectroscopy on a series of ILs [C_nmim]BF₄ (n = 0-12) shows that only the chains with n = 3-10 favor anomaly. Moreover, remarkable even vs. odd n peculiarities were systematically observed. Finally, similar anomaly was for the first time observed for a non-IL glass of dibutyl phthalate, which structurally mimics cations of imidazolium ILs. Therefore, such anomalous density behavior in a glassy state nanocage goes far beyond ILs and proves to be a more general phenomenon, which can be structurally tuned and rationally adjusted for various potential applications in nanoscale materials.

Poly (deep eutectic solvents) as a new class of sustainable sorbents for solid phase extraction: application for preconcentration of Pb (II) from food and water samples

A new class of polymeric sorbents based on deep eutectic solvents (DESs) is introduced. These materials are obtained from simple and inexpensive precursors via an energy-efficient process. The primary benefit of these sorbents is that they possess the unique characteristics of DESs and porous materials simultaneously. Moreover, the possibility of tailoring deep eutectic solvents allows designing a specific polymer for a desired analyte, based on its physical and chemical properties. In this work, the deep eutectic solvent of tetrabutylammonium bromide and acrylic acid (1:2 molar ratio) was prepared and then polymerized under solventless condition. The synthesized polymer was characterized by FT-IR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), and Brunauer, Emmett and Teller analysis (BET) to evaluate the properties of the sorbent. The poly (TBAB-2AA DES) was applied as a selective sorbent for preconcentration of lead from food and water samples prior to its quantification by flame atomic absorption spectroscopy (FAAS). Variable factors affecting the extraction were optimized, and under the optimum conditions, the calibration plot was linear in the range 5.0-250.0 μg L^-1. The relative standard deviation was (for n = 5) (RSD) < 3%. The limit of detection (LOD) and the enhancement factor were found to be 2.0 μg L^-1 and 50, respectively. Finally, the accuracy of the method was assessed by comparison of the results with those obtained by direct determination of lead using inductively coupled plasma mass spectrometry (ICP-MS) and spiked real samples. The obtained recoveries were between 92 and 106%. Graphical abstract.

Insight into the formation and permeability of ionic liquid unilamellar vesicles by molecular dynamics simulation

Unilamellar vesicles in solution could open up new horizons for reaction and material delivery, but the formation mechanism especially for the permeability of the small molecule through the vesicle membrane is still unknown. In this study, the formation and permeability of the unilamellar vesicles formed by the ionic liquid 1-dodecyl-3-methylimidazolium salicylate ([C12mim][Sal]) have been investigated by molecular dynamics simulation. Starting from a random distribution of ionic liquids, the entire process of vesicle formation could be observed on a nanosecond time scale, during which planar and cup-like structures are formed at the intermediate stage. Energy analysis reveals that the electrostatic interactions between cations and anions play a dominant role in forming and stabilizing the vesicle. Radial density distribution functions indicate that the final stable vesicle is a spherical bilayer structure. Besides, it was found that the structure of vesicles is maintained with the increase of temperature, while the water molecules in the vesicles could be completely exchanged quickly. These results suggest that vesicles may be beneficial for the enrichment or release of molecules.

Multicomponent Radziszewski Emulsion Polymerization toward Macroporous Poly(ionic liquid) Catalysts

Interconnected macroporous imidazolium-based monoliths are produced via the modified Radziszewski multicomponent reaction (MCR) applied to triamines under high internal phase emulsion (HIPE) conditions. This straightforward one-pot synthesis combines the efficiency and versatility of MCRs with the ease of implementation of the emulsion templating polymerization process. The characterization of the chemical structure and morphology of the resulting materials confirms the formation of the expected macroporous poly(ionic liquid)s (PILs) networks. The promising catalytic activity and recyclability of these porous PIL monoliths are illustrated for the transesterification reaction and the decarboxylation of caffeic acid. In these cases, almost complete conversion is reached while benefiting from the advantages associated with a heterogeneous catalyst.

Pd nanoparticles stabilized with phosphine-functionalized porous ionic polymer for efficient catalytic hydrogenation of nitroarenes in water

Small palladium nanoparticles stabilized with phosphine-functionalized PIP displayed high catalytic activity for nitroarenes hydrogenation. Nano-size Pd particles, electron-donation effect of phosphine ligand, and surface wettability account for its excellent catalytic performance.

A Porous Polymer-Based Solid Acid Catalyst with Excellent Amphiphilicity: An Active and Environmentally Friendly Catalyst for the Hydration of Alkynes

Developing efficient solid acid catalysts for aqueous organic reactions is of great importance for the development of sustainable chemistry. In this work, a porous polymeric acid catalyst was synthesized via a solvothermal copolymerization and a successive ion-exchange method. Physicochemical characterizations suggested that the prepared polymers possessed large Brunauer-Emmett-Teller (BET) surface areas, a hierarchically porous structure, excellent surface amphiphilicity, and nice swelling properties. Notably, an activity test in phenylacetylene hydration indicated that the prepared solid acid exhibited high catalytic activity in water, which outperformed commercial amberlyst-15, sulfuric acid, and benzenesulfonic acid. Moreover, the prepared solid acid can be easily recovered and reused at least four times. Additionally, a variety of aromatic and aliphatic alkynes could be effectively transformed into corresponding ketones under optimal reaction conditions.

Porous ionic liquid polymer: A reusable adsorbent with broad operating pH range for speciation of nitrate and nitrite

Ionic liquids (ILs) are a class of fluids with unique physicochemical properties employing polymeric substances emerging new materials. Solidification of ILs into porous materials generates porous ionic liquid polymers that combine the unique characteristics of ILs with common porous materials and polymers. In this study, it's the first time the porous ionic liquid polymer was chosen as a sorbent for extraction and speciation of nitrite and nitrate. Porous IL was prepared through polymerization of 1-allyl-3-methylimidazolium bromide monomers in the presence of azobisisobutyronitrile (AIBN) and crosslinking of ethylene glycol dimethyl acrylate (EGDMA). Parameters affecting the adsorbent performance were optimized. Under the optimal conditions, correlation coefficient (R²) was 0.9996 and LOD was 0.1 µg L^-1. This method presented the linearity in the concentration range between 0.1-100 µg L^-1 and the relative standard deviation was 3.2%. Finally, the adsorption behavior of the obtained sorbent for nitrate and nitrite determination in various real samples was evaluated. The result indicates that the porous ionic liquid polymer showed high adsorption capacity (233 mg g^-1). The convenient preparation of the porous ionic liquid material, as well as high adsorption capacity for anionic pollutants predicted its broad application potential in anion removal materials.

Poly(ionic liquid)s as a distinct receptor material to create a highly-integrated sensing platform for efficiently identifying numerous saccharides

A highly-integrated sphere-based sensing platform for directly identifying numerous saccharides very efficiently is developed.

Saccharides have strong hydrophilicities, and are complex molecular structures with subtle structure differences, and tremendous structural variations. The creation of one sensing platform capable of efficiently identifying such target systems presents a huge challenge. Using the integration of unique multiple noncovalent interactions simultaneously occurring in poly(ionic liquid)s (PILs) with multiple signaling channels, in this research an aggregation-induced emission (AIE)-doped photonic structured PIL sphere is constructed. It is found that such a sphere can serve as a highly integrated platform to provide abundant fingerprints for directly sensing numerous saccharides with an unprecedented efficiency. As a demonstration, 23 saccharides can be conveniently identified using only one sphere. More importantly, by using simple ion-exchanges of PIL receptors or/and increasing the AIE signaling channels, this platform is able to perform, on demand, different sensing tasks very efficiently. This is demonstrated by using it for the detection of difficult targets, such as greatly extended saccharides as well as mixed targets, in real-life examples on one or two spheres. The findings show that this new class of platform is very promising for addressing the challenges of identifying saccharides.

A cationic porous organic polymer for high-capacity, fast, and selective capture of anionic pollutants

The emerging ionic porous organic materials have achieved various applications in different fields, however, there is limited study on using them to capture ionic pollutants from water. Here we demonstrate a facile method to prepare a cationic porous organic polymer via catalyst-free Schiff base reaction. The imidazolium-based polymer (ImPOP-1) was constructed through copolymerizing cationic molecules with low-cost benzidine. The as-prepared ImPOP-1 exhibits high capacity (e.g., 476.2 mg g^-1 for Pd (II) and 578.5 mg g^-1 for AO7^-), excellent selectivity (e.g., more than 99% removal efficiency for Pd (II) in the presence of 100 times excess of SO₄^2-), and fast kinetics (e.g., 98.6% removal efficiency within 5 min for Pd (II) ions) to the anionic pollutants including organic dyes and heavy metal ions. The excellent performance on scavenging anionic pollutants from water suggests that ImPOP-1 holds promising potential as an ion exchange material for water remediation.

Does poly(ionic liquid) modulate the non-covalent interactions of chicken egg white lysozyme? Elucidation of biomolecular interactions between biomolecules and macromolecular solvents

Stabilizing and destabilizing effects of different poly(ionic liquid) (PIL) concentrations on chicken egg white lysozyme as a reason for bimolecular interactions.

A succinct strategy for construction of nanoporous ionic organic networks from a pyrylium intermediate

A two-step strategy under metal- and template-free conditions is presented for the fabrication of hydroxyl group and pyridinium salt-bifunctionalized nanoporous ionic organic networks with high surface area.

Three birds, one stone - photo-/piezo-/chemochromism in one conjugated nanoporous ionic organic network

A nanoporous material bearing a high ion density and inherent organic radical character was synthesized by a facile one-pot process, which exhibits photo-, piezo- and chemochromism, driven by the diverse electron transfer processes between the acceptor framework and different electron donors. The responsive behavior is useful for its sensing application, as demonstrated here for pressure, anion and gas sensing.