Pot economy and one-pot synthesis

One-pot, microwave (MW)-assisted production of furfural from almond-, oil-, and wine-derived co-products through biorefinery-based approaches

This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H2SO4, as opposed to a 37 % yield with AlCl3·6H2O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl3·6H2O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl3·6H2O in contrast to H2SO4, thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles.

Heteropolyaromatic Covalent Organic Frameworks via One-Pot Multicomponent Reactions

Multicomponent reactions (MCRs) offer a platform to create different chemical structures and linkages for highly stable covalent organic frameworks (COFs). As an illustrative example, the multicomponent Povarov reaction generates 2,4-phenylquinoline from aldehydes and amines in the presence of electron-rich alkenes. In this study, we introduce a new domino reaction to generate unprecedented 2,3-phenylquinoline COFs in the presence of epoxystyrene. This work thus presents, for the first time, structural isomeric COFs produced by multicomponent domino and Povarov reactions. Furthermore, 2,3-phenylquinolines can undergo a Scholl reaction to form extended aromatic linkages. With this approach, we synthesize two thermally and chemically stable MCR-COFs and two heteropolyaromatic COFs using both domino and in situ domino and Scholl reactions. The structure and properties of these COFs are compared with the corresponding 2,4-phenylquinoline-linked COF and imine-COF, and their activity toward benzene and cyclohexane sorption and separation is investigated. The position of the pendant phenyl groups within the COF pore plays a crucial role in facilitating the industrially important sorption and separation of benzene over cyclohexane. This study opens a new avenue to construct heteropolyaromatic COFs via MCR reactions.

A Domino Dearomative ipso-Annulation/Desymmetrization Approach: Stereoselective Access to Tricyclic Alkaloid Skeletons

Herein, we reveal an unprecedented domino annulation of N-benzyl-acrylamides with 1,3-dicarbonyls for the assembly of fused tricyclic alkaloid frameworks incorporating a spirocycle via an alkylation/dearomative ipso-annulation/Michael addition (desymmetrization) sequence. This conversion involves three carbon-carbon bond formations, generating four chiral carbons, including three quaternary carbon centers, in a single diastereomer in one pot under identical reaction conditions. The synthetic potential of this atom-economic method is illustrated by modifications of the functional groups present in the products obtained.

An insight into sustainable and green chemistry approaches for the synthesis of quinoline derivatives as anticancer agents

Quinolones, a key class of heterocyclics, are gaining popularity among organic and medicinal chemists due to their promising properties. Quinoline, with its broad spectrum of action, plays a primordial role in chemotherapy for cancer. Drugs include lenvatinib and its structural derivatives carbozantinib and bosutinib, and tipifarnib are the popular anticancer agents. Owing to the importance of quinoline, there are several classical methods for the synthesis such as, such as Gould-Jacobs, Conrad-Limpach, Camps cyclization, Skraup, Doebnervon Miller, Combes, Friedlander, Pfitzinger, and Niementowski synthesis. These methods are well-commended for developing an infinite variety of quinoline analogues. However, these procedures are associated with several drawbacks such as long reaction times, use of hazardous chemicals or stoichiometric proportions, difficulty of working up conditions, high temperatures, organic solvents, and the presence of numerous steps, all of which have an impact on the environment and the economy. As a result, researchers are working hard to develop green quinoline compounds in the hopes of making groundbreaking discoveries in the realm of cancer. In this review, we have highlighted significant research on quinoline-based compounds and their structure-activity relationship (SAR). Furthermore, because of the significant economic and environmental health and safety (EHS) concerns, more research is being dedicated to the green synthesis of quinolone derivatives. The current review offers recent advances in quinoline derivatives as anticancer agents for green synthesis using microwave, ultrasound, and one-pot synthesis. We believe that our findings will provide useful insight and inspire more green research on this framework to produce powerful and selective quinoline derivatives.

Seven-membered N-heterocycles as approved drugs and promising leads in medicinal chemistry as well as the metal-free domino access to their scaffolds

Azepanes or azepines are structural motifs of many drugs, drug candidates and evaluated lead compounds. Even though compounds having N-heterocyclic 7-membered rings are often found in nature (e.g. alkaloids), the natural compounds of this group are rather rare as approved therapeutics. Thus, recently studied and approved azepane or azepine-congeners predominantly consist of semi-synthetically or synthetically-obtained scaffolds. In this review a comparison of approved drugs and recently investigated leads was proposed taking into regard their structural aspects (stereochemistry), biological activities, pharmacokinetic properties and confirmed molecular targets. The 7-membered N-heterocycles reveal a wide range of biological activities, not only against CNS diseases, but also as e.g. antibacterial, anticancer, antiviral, antiparasitic and against allergy agents. As most of the approved or investigated potential drugs or lead structures, belonging to 7-membered N-heterocycles, are synthetic scaffolds, this report also reveals different and efficient metal-free cascade approaches useful to synthesize both simple azepane or azepine-containing congeners and those of oligocyclic structures. Stereochemistry of azepane/azepine fused systems, in view of biological data and binding with the targets, is discussed. Apart from the approved drugs, we compare advances in SAR studies of 7-membered N-heterocycles (mainly from 2018 to 2023), whereas the related synthetic part concerning various domino strategies is focused on the last ten years.

From Facile One-Pot Synthesis of Semi-Degradable Amphiphilic Miktoarm Polymers to Unique Degradation Properties

We report a one-pot synthesis of well-defined A5B and A8B miktoarm star-shaped polymers where N,N-dimethylaminoethyl methacrylate (DMAEMA) and various cyclic esters such as ε-caprolactone (ε-CL), lactide (LA) and glycolide (GA) were used for the synthesis. Miktopolymers were obtained by simultaneously carrying out atom transfer radical polymerization (ATRP) of DMAEMA, ring-opening polymerization (ROP) of cyclic esters, and click reaction between the azide group in gluconamide-based (GLBr5-Az) or lactonamide-based (GLBr8-Az) ATRP initiators and 4-pentyn-1-ol. The relatively low dispersity indices of the obtained miktoarm stars (Đ = 1.2-1.6) indicate that control over the polymerization processes was sustained despite almost complete monomers conversions (83-99%). The presence of salts from phosphate-buffered saline (PBS) in polymer solutions affects the phase transition, increasing cloud point temperatures (TCP) values. The critical aggregation concentration (CAC) values increased with a decreasing number of average molecular weights of the hydrophobic fraction. Hydrolytic degradation studies revealed that the highest reduction of molecular weight was observed for polymers with PCL and PLGCL arm. The influence of the composition on the miktopolymers hydrophilicity was investigated via water contact angle (WCA) measurement. Thermogravimetric analysis (TGA) disclosed that the number of arms and their composition in the miktopolymer affects its weight loss under the influence of temperature.

Covalent Organic Framework/Graphene Hybrids: Synthesis, Properties, and Applications

To address current energy crises and environmental concerns, it is imperative to develop and design versatile porous materials ideal for water purification and energy storage. The advent of covalent organic frameworks (COFs), a revolutionary terrain of porous materials, is underscored by their superlative features such as divinable structure, adjustable aperture, and high specific surface area. However, issues like inferior electric conductivity, inaccessible active sites impede mass transfer and poor processability of bulky COFs restrict their wider application. As a herculean stride forward, COF/graphene hybrids amalgamate the strengths of their constituent components and have in consequence, enticed significant scientific intrigue. Herein, the current progress on the structure and properties of graphene-based materials and COFs are systematically outlined. Then, synthetic strategies for preparing COF/graphene hybrids, including one-pot synthesis, ex situ synthesis, and in situ growth, are comprehensively reviewed. Afterward, the pivotal attributes of COF/graphene hybrids are dissected in conjunction with their multifaceted applications spanning adsorption, separation, catalysis, sensing, and energy storage. Finally, this review is concluded by elucidating prevailing challenges and gesturing toward prospective strides within the realm of COF/graphene hybrids research.

Interrupted Corey-Chaykovsky Reaction of Tethered Bis-Enones to Access 2,3-Epoxy-hexahydrofluoren-9-ones

The Corey-Chaykovsky reaction is usually employed to synthesize cyclopropanes from activated olefins. We intercepted the intermediates prevailing during this transformation and diverted the process for the creation of intricate molecular motifs. We describe an unusual skeletal remodelling of tethered bis-enones to 2,3-epoxy-hexahydrofluoren-9-ones via an "interrupted Corey-Chaykovsky reaction". The strategy rationally merges the nucleophilic features of sulfur ylides with electronically biased olefins to achieve the regio- and stereoselective synthesis of several new classes of hydrofluorenones. We have demonstrated the synthetic utility of the products in accessing several highly functionalized molecules.

Eosin, blue LEDs and DIPEA are employed in a simple synthesis of (poly)cyclic O,O- and N,O-acetals

A simple procedure for the synthesis of (poly)cyclic O,O- and N,O-acetals from various enol ethers, N-acyl enamines or Boc-protected enamines has been developed. The key step is a photocatalytic Stork-Ueno-type cylization using the very simple metal-free conditions of catalytic eosin, diisopropylamine in the green solvent ethanol with blue LED irradition.

Cascade Sequence of Photooxygenation-Epoxidation for the Flow Synthesis of Epoxy Alcohols

A photooxygenation-epoxidation cascade sequence converting alkenes to epoxy alcohols was developed and evaluated in batch and continuous-flow systems. In the batch system, the undesired interactions between the photooxygenation and epoxidation catalysts resulted in suboptimal yields, whereas the fine control of reaction parameters in the flow system allowed the allyl hydroperoxides produced through photooxygenation of alkenes to be rapidly converted to epoxy alcohols in yields of up to 93%. The developed procedure allows one to avoid an important synthetic bottleneck, works well where traditional batch synthesis fails, and can be scaled up to meet the needs of industrial production, thus presenting a valuable addition to the toolbox of practicing organic chemists.

Access to chiral dihydrophenanthridines via a palladium(0)-catalyzed Suzuki coupling and C-H arylation cascade reaction using new chiral-bridged biphenyl bifunctional ligands

A class of chiral-bridged biphenyl phosphine-carboxylate bifunctional ligands CB-Phos has been developed and successfully applied to Pd(0)-catalyzed single enantioselective C-H arylation and a one pot cascade reaction involving Suzuki cross-coupling and C-H arylation. The catalytic system provides a new and convenient way for the synthesis of versatile chiral dihydrophenanthridines with rich structures and broad functional group tolerance. Good to excellent yields with high enantioselectivities were generally achieved. The reaction mechanism of the cascade reaction was also preliminarily discussed.

A one-pot telescopic synthesis of benzo[b]carbazoles and exploration of their liquid crystalline properties

We describe a diversity-oriented one-pot telescopic synthesis of various benzo[b]carbazoles with the naphthannulation of indoles as the key step, enabled by an intramolecular furan-olefin Diels-Alder reaction. This strategy is general and efficient across a wide range of substrates. We applied this method to synthesize and characterize the first benzo[b]carbazole-based liquid crystalline materials, where the unique molecular design led to the formation of a rare nematic phase at room temperature.

One-pot Ugi-azide and Heck reactions for the synthesis of heterocyclic systems containing tetrazole and 1,2,3,4-tetrahydroisoquinoline

A new method for the synthesis of heterocyclic systems containing tetrazole and tetrahydroisoquinoline is developed via the performance of one-pot Ugi-azide and Heck cyclization reactions. The integration of the multicomponent and post-condensation reactions in one-pot maximizes the pot-, atom-, and step-economy (PASE).

Organocatalyst-mediated asymmetric one-pot/two domino/three-component coupling reactions for the synthesis of trans-hydrindanes

Highly substituted trans-hydrindanes were synthesized by the three-component coupling reactions of 1,3-diethyl 2-(2-oxopropylidene)propanedioate and two different α,β-unsaturated aldehydes catalyzed by diphenylprolinol silyl ether. The reaction proceeds via two successive independent catalytic domino reactions in a one-pot reaction by a single chiral catalyst. Domino reactions involve Michael/Michael and Michael/aldol reactions to afford trans-hydrindanes with excellent diastereoselectivity and nearly optically pure form.

Impact of Nonionic Surfactants on Reactions of IREDs. Applications to Tandem Chemoenzymatic Sequences in Water

The influence of added surfactant to aqueous reaction mixtures containing various IREDs has been determined. Just the presence of a nonionic surfactant tends to increase both rates and extent of conversion to the targeted amines. The latter can be as much as >40% relative to buffer alone. Several tandem sequences featuring several steps that combine use of an IRED together with various types of chemocatalysis are also presented, highlighting the opportunities for utilizing chemoenzymatic catalysis, all in water.

Catalytic Light-Driven Strategy for Transforming Oximes to Carbonyls

Oxime and carbonyl functional groups serve as powerful chemical hubs for constructing complex synthetic targets and valuable molecular scaffolds. In furthering this value, we report a photopromoted catalytic deoximation protocol for converting oximes and their derivatives to carbonyl functional groups. This strategic approach benefits from the use of renewable light energy input and ambient air conditions, in addition to demonstrating good substrate scope, functional group tolerance, and product yields. In offering, insights into these reactivity mechanistic studies are communicated, and the value of this protocol is further shown through one-pot operations.

Curation and cheminformatics analysis of a Ugi-reaction derived library (URDL) of synthetically tractable small molecules for virtual screening application

Virtual screening (VS) is an important approach in drug discovery and relies on the availability of a virtual library of synthetically tractable molecules. Ugi reaction (UR) represents an important multi-component reaction (MCR) that reliably produces a peptidomimetic scaffold. Recent literature shows that a tactically assembled Ugi adduct can be subjected to further chemical modifications to yield a variety of rings and scaffolds, thus, renewing the interest in this old reaction. Given the reliability and efficiency of UR, we collated an UR derived library (URDL) of small molecules (total = 5773) for VS. The synthesis of the majority of URDL molecules may be carried out in 1-2 pots in a time and cost-effective manner. The detailed analysis of the average property and chemical space of URDL was also carried out using the open-source Datawarrior program. The comparison with FDA-approved oral drugs and inhibitors of protein-protein interactions (iPPIs) suggests URDL molecules are 'clean', drug-like, and conform to a structurally distinct space from the other two categories. The average physicochemical properties of compounds in the URDL library lie closer to iPPI molecules than oral drugs thus suggesting that the URDL resource can be applied to discover novel iPPI molecules. The URDL molecules consist of diverse ring systems, many of which have not been exploited yet for drug design. Thus, URDL represents a small virtual library of drug-like molecules with unexplored chemical space designed for VS. The structures of all molecules of URDL, oral drugs, and iPPI compounds are being made freely accessible as supplementary information for broader application.

Enhancing chemical synthesis: a two-stage deep neural network for predicting feasible reaction conditions

In the field of chemical synthesis planning, the accurate recommendation of reaction conditions is essential for achieving successful outcomes. This work introduces an innovative deep learning approach designed to address the complex task of predicting appropriate reagents, solvents, and reaction temperatures for chemical reactions. Our proposed methodology combines a multi-label classification model with a ranking model to offer tailored reaction condition recommendations based on relevance scores derived from anticipated product yields. To tackle the challenge of limited data for unfavorable reaction contexts, we employed the technique of hard negative sampling to generate reaction conditions that might be mistakenly classified as suitable, forcing the model to refine its decision boundaries, especially in challenging cases. Our developed model excels in proposing conditions where an exact match to the recorded solvents and reagents is found within the top-10 predictions 73% of the time. It also predicts temperatures within ± 20 [Formula: see text] of the recorded temperature in 89% of test cases. Notably, the model demonstrates its capacity to recommend multiple viable reaction conditions, with accuracy varying based on the availability of condition records associated with each reaction. What sets this model apart is its ability to suggest alternative reaction conditions beyond the constraints of the dataset. This underscores its potential to inspire innovative approaches in chemical research, presenting a compelling opportunity for advancing chemical synthesis planning and elevating the field of reaction engineering. Scientific contribution: The combination of multi-label classification and ranking models provides tailored recommendations for reaction conditions based on the reaction yields. A novel approach is presented to address the issue of data scarcity in negative reaction conditions through data augmentation.

Straightforward Access to Free β2,3,3 -Amino Acids through One Pot C-H Activation/C-C Cleavage

The first synthesis of unnatural β2,3,3 -amino acids with a spirocyclic backbone by one-pot protocol has been presented. This reaction features wide functional group tolerance and feasibility of post-functionalization of natural products and biologically important molecules. Novel dipeptide and tripeptide structures were assembled using this newly developed β2,3,3 -amino acid in high efficiency. The combination of C-H activation and C-C cleavage for the synthesis of β-amino acids would trigger more promising synthetic routes for this compound.

One-Pot Synthesis and Surfactant Removal from MCM-41 Using Microwave Irradiation

This research pioneers the application of microwave irradiation as an innovative strategy for one-pot synthesis and surfactant elimination (cetyltrimethylammonium bromide-CTAB) from MCM-41, introducing a rapid and efficient methodology. MCM-41 silica is widely utilized in various applications due to its unique textural and structural properties. Nonetheless, the presence of residual surfactants after synthesis poses a challenge to its effective application. MCM-41 synthesis, conducted in a microwave reactor at 60 °C, provided a result within 0.5 to 1 h. Comprehensive analyses of structural, chemical, morphological, and surface characteristics were undertaken, with a focus on the impact of synthesis time on these properties. Surfactant extraction involved the use of ethanol as a solvent at 120 °C for 6 min within the microwave reactor. The acquired particles, coupled with the properties of textural and structural features, affirmed the efficacy of the synthesis process, resulting in the synthesis of MCM-41 within 36 min. This study presents the first instance of one-pot synthesis and surfactant removal from MCM-41 using a microwave reactor. The proposed method not only addresses the surfactant removal challenge, but also substantially accelerates the synthesis process, thereby enhancing the potential for MCM-41's application in diverse fields.

Two-step, high-yielding total synthesis of antibiotic pyrones

A simple two-step dialkylation protocol was developed to synthesize biologically active antibiotics photopyrones, pseudopyronines, and violapyrones from bio-renewable triacetate lactone in excellent yields. These pyrones are functionally modified into another set of pyrone natural products by a single O-methylation reaction. The high-yielding gram scale synthesis of four natural products [pseudopyronine A, photopyrone A, pseudopyronine B and photopyrone C] demonstrated the viability for industrial applications.

Iodobenzene-Catalyzed Synthesis of Fully Functionalized NH-Pyrazoles and Isoxazoles from α,β-Unsaturated Hydrazones and Oximes via 1,2-Aryl Shift

An iodine(III)-catalyzed general method for the synthesis of fully functionalized NH-pyrazoles and isoxazoles from α,β-unsaturated hydrazones and oximes, respectively, via cyclization/1,2-aryl shift/aromatization/detosylation, has been developed. The reaction progresses through an anti-Baldwin 5-endo-trig cyclization. It gives direct access to an advanced intermediate for the preparation of valdecoxib and parecoxib, drugs used for COX-inhibition. In addition, a method for N-alkynylation of pyrazoles has also been developed in the presence of TIPS-EBX.

Base-Catalyzed One-Pot Synthesis of Selenosulfides: A Base Basicity-Controlled Approach

We developed a novel and efficient sequential one-pot synthesis of selenosulfides via a base-catalyzed methodology utilizing readily available starting compounds, under mild reaction conditions. This method eliminated the need for excess oxidants or additives and simplified the synthesis procedure. Furthermore, organic amine bases served as exceptional catalysts for synthesizing the target products. The performance of a catalytic system depends on the basicity of the bases. The selection of suitable bases, based on their pKaH values, is crucial for the selective synthesis of selenosulfides without the formation of byproducts. This method provides a direct route for the preparation of selenosulfides, which are important scaffolds in organic chemistry.

Potassium tert-Butoxide-Mediated Cascade Synthesis of Rutaecarpine Alkaloid Analogues: Access to Molecular Complexity on Multigram Scales

In this study, we present a novel and cost-effective approach for synthesizing biologically significant analogues of rutaecarpine alkaloid through a one-step cascade reaction. The pentacyclic core of rutaecarpine alkaloid analogues is efficiently constructed using 2-aminobenzonitriles and substituted indole-2-carbaldehydes in the presence of the affordable base KOtBu. The salient feature of this approach is the promotion of a sequential cascade process within a single reaction vessel including the formation of a dihydroquinazolinone ring, oxidation, and cyclization. This method can be successfully applied on a larger scale, making it economically viable.

Development and Applications of Water-Compatible Reactions: A Journey to Be Continued

ConspectusThe pursuit of novel and eco-friendly methods in organic synthesis is gaining prominence, with a strong emphasis on green transformations using renewable and sustainable resources. Among these environmentally conscious approaches, water-compatible reactions stand out for their many advantages. Water, as a solvent, offers unmatched abundance, cost-efficiency, and environmental compatibility compared to organic solvents. Its use eliminates the need for complex protection and deprotection steps for reactive functional groups in multistep synthesis and enables the use of water-soluble substrates like proteins and carbohydrates. Water-compatible reactions also provide opportunities to combine with enzymes, resulting in chemoenzymatic transformations that can increase efficiency. Additionally, these reactions facilitate site-specific modification and the bioconjugation of biomolecules, leading to bioconjugate therapeutics.Over nearly three decades, our research group has been dedicated to developing innovative water-compatible methodologies and concepts. This Account provides a comprehensive overview of our contributions since 1994. Our central strategy revolves around integrating green chemistry principles into our methods, focusing on (i) developing reactions that can operate under mild conditions, including room temperature, atmospheric pressure, and physiological pH; (ii) designing atom-economical reactions that minimize waste production; (iii) replacing toxic and flammable organic solvents with eco-friendly alternatives like water and ethanol; and (iv) reducing reliance on metals or halogenated compounds in specific reactions.In this Account, we detail our achievements in developing efficient methodologies in aqueous media, highlighting their scope, limitations, asymmetric control, and applications for synthesizing complex molecules and functionalizing peptides and proteins. Mechanistic investigations underlying these developments are also discussed when applicable. Furthermore, we offer insights into the reasoning behind our work and address future opportunities and challenges in this area of research. We hope that this Account will inspire continued interest and foster new breakthroughs. By exploring innovative and broadly applicable strategies that expand the water-compatible synthetic toolbox, we aim to pave the way for the truly green and sustainable synthesis of complex molecules and pharmaceuticals.

Recent advances in ligand-enabled palladium-catalyzed divergent synthesis

Developing efficient and straightforward strategies to rapidly construct structurally distinct and diverse organic molecules is one of the most fundamental tasks in organic synthesis, drug discovery and materials science. In recent years, divergent synthesis of organic functional molecules from the same starting materials has attracted significant attention and has been recognized as an efficient and powerful strategy. To achieve this objective, the proper adjustment of reaction conditions, such as catalysts, solvents, ligands, etc., is required. In this review, we summarized the recent efforts in chemo-, regio- and stereodivergent reactions involving acyclic and cyclic systems catalyzed by palladium complexes. Meanwhile, the reaction types, including carbonylative reactions, coupling reactions and cycloaddition reactions, as well as the probable mechanism have also been highlighted in detail.

Cu-Catalyzed Synthesis of 2-Silyl-1,3-butadienes from Allenols and Applications to One-Pot Synthesis of Tetrasubstituted Arylsilanes

A copper-catalyzed chemo- and stereoselective method for the synthesis of (E)-2-silyl-1,3-butadienes from a broad range of allenols using mild Si-B reagents is reported in this study. Our protocol required a short reaction time at ambient temperature to produce the desired dienes in high yields. Synthetic applications are highlighted by the one-pot synthesis of tetrasubstituted arylsilanes from allenols as well as the further functionalization of C-Si bonds.

An efficient one-pot synthesis of pyrazole complexes formed in situ: synthesis, crystal structure, Hirshfeld surface analysis and in vitro biological properties

The molecular crystals of monomeric and dimeric pyrazole complexes were prepared via one-pot syntheses. These are dichloridobis(3,5-dimethyl-1H-pyrazole-κN1)cobalt/zinc(0.2/0.8), [Co0.20Zn0.80Cl2(C5H8N2)2] or [Co0.2Zn0.8Cl2(3,5-dmp)2] (1), and bis(μ-3,5-dimethyl-1H-pyrazole)-κ2N1:N2;κ2N2:N1-bis[bromido/chlorido(0.7/0.3)bis(3,5-dimethyl-1H-pyrazole-κN1)cobalt/zinc(0.1/0.9)], [Co0.20Zn1.80Br1.40Cl0.60(C5H7N2)2(C5H8N2)2] or [Co0.1Zn0.9Br0.7Cl0.3(μ-3,5-dmp)(3,5-dmp)]2 (2). The isolated complexes contain 3,5-dimethylpyrazole (3,5-dmp) ligands formed in situ from the decomposition of 1-hydroxymethyl-3,5-dimethylpyrazole. In both isolated complexes, some positional disorder is observed at the metal ions and halogen ligands. The molecular crystals of 1 and 2 are centrosymmetric, with the space groups C2/c and P-1, respectively. Additionally, in the dinuclear complex, the pyrazole ring has a bridging coordination function with respect to the metal ions. Both complexes have good biological activities against cancer cells. The results of an in vitro cytotoxicity study indicated that compounds 1 and 2 showed significant cytotoxicity for cancer cell lines, including hepatic (HepG2 cells), lung (A549 cells) and colon cancer cells (SW 480 and SW 620). Based on the calculated IC50 values against human cancer cell lines, it was found that both complexes demonstrated potent antiproliferative activity combined with great selectivity towards cancer cells. Complex 2 was a more effective cytotoxic agent which, at the same time, exhibited high cytocompatibility. The obtained data are very encouraging and could be useful for anticancer drug discovery.

Synthesis of 2,3-Dihydropyrroles by Rhodium(II)-Catalyzed Transannulation of N-Sulfonyl-1,2,3-triazoles: Diversity Generation by One-Pot Methodologies

A versatile one-pot strategy for the generation of compounds of synthetic interest has been presented, promoting the development of practical processes. First, the transannulation of N-sulfonyltriazoles through alkenes and rhodium catalysis was described, giving 2,3-dihydropyrroles in 13-76% yield. As contributions of the strategy, the evaluation of alkenes with different properties, and the use of only drops of solvent (0.40 M) was highlighted. In addition, we described a methodology for the modulation of the N-sulfonyltriazoles, to obtain selectively cyclopropyl tosylimines or 2,3-dihydropyrroles. For the latter products, neat conditions were also included. Finally, the potential of the methodology was demonstrated by the synthesis of six structurally different analogues starting from the same substrates and late-stage transformation of bioactive molecules. These compounds were generated in 38-63% yield, after two or more conversion steps carried out in the same reaction vessel.

One-pot cascade synthesis of dibenzothiophene-based heterobiaryls from dibenzothiophene-5-oxide

A sulfoxide directed C-H metalation/boration/B2Pin2 mediated reduction/Suzuki coupling process to synthesize 4-substituted dibenzothiophene (DBT) in one-pot from dibenzothiophene-5-oxide (DBTO) was developed. A variety of DBT-based heterobiaryls were prepared in satisfactory to good yields. A mechanism was proposed. The application of this methodology was demonstrated by synthesizing a luminescent material.

A novel recyclable organocatalyst for the gram-scale enantioselective synthesis of (S)-baclofen

Synthesizing organocatalysts is often a long and cost-intensive process, therefore, the recovery and reuse of the catalysts are particularly important to establish sustainable organocatalytic transformations. In this work, we demonstrate the synthesis, application, and recycling of a new lipophilic cinchona squaramide organocatalyst. The synthesized lipophilic organocatalyst was applied in Michael additions. The catalyst was utilized to promote the Michael addition of cyclohexyl Meldrum's acid to 4-chloro-trans-β-nitrostyrene (quantitative yield, up to 96% ee). Moreover, 1 mol % of the catalyst was feasible to conduct the gram-scale preparation of baclofen precursor (89% yield, 96% ee). Finally, thanks to the lipophilic character of the catalyst, it was easily recycled after the reaction by replacing the non-polar reaction solvent with a polar solvent, acetonitrile, with 91-100% efficiency, and the catalyst was reused in five reaction cycles without the loss of activity and selectivity.

A potential strategy against clinical carbapenem-resistant Enterobacteriaceae: antimicrobial activity study of sweetener-decorated gold nanoparticles in vitro and in vivo

BACKGROUND

Carbapenem-resistant Enterobacteriaceae (CRE) present substantial challenges to clinical intervention, necessitating the formulation of novel antimicrobial strategies to counteract them. Nanomaterials offer a distinctive avenue for eradicating bacteria by employing mechanisms divergent from traditional antibiotic resistance pathways and exhibiting reduced susceptibility to drug resistance development. Non-caloric artificial sweeteners, commonly utilized in the food sector, such as saccharin, sucralose, acesulfame, and aspartame, possess structures amenable to nanomaterial formation. In this investigation, we synthesized gold nanoparticles decorated with non-caloric artificial sweeteners and evaluated their antimicrobial efficacy against clinical CRE strains.

RESULTS

Among these, gold nanoparticles decorated with aspartame (ASP_Au NPs) exhibited the most potent antimicrobial effect, displaying minimum inhibitory concentrations ranging from 4 to 16 µg/mL. As a result, ASP_Au NPs were chosen for further experimentation. Elucidation of the antimicrobial mechanism unveiled that ASP_Au NPs substantially elevated bacterial reactive oxygen species (ROS) levels, which dissipated upon ROS scavenger treatment, indicating ROS accumulation within bacteria as the fundamental antimicrobial modality. Furthermore, findings from membrane permeability assessments suggested that ASP_Au NPs may represent a secondary antimicrobial modality via enhancing inner membrane permeability. In addition, experiments involving crystal violet and confocal live/dead staining demonstrated effective suppression of bacterial biofilm formation by ASP_Au NPs. Moreover, ASP_Au NPs demonstrated notable efficacy in the treatment of Galleria mellonella bacterial infection and acute abdominal infection in mice, concurrently mitigating the organism's inflammatory response. Crucially, evaluation of in vivo safety and biocompatibility established that ASP_Au NPs exhibited negligible toxicity at bactericidal concentrations.

CONCLUSIONS

Our results demonstrated that ASP_Au NPs exhibit promise as innovative antimicrobial agents against clinical CRE.

Decarboxylative 1,3-dipolar cycloaddition of amino acids for the synthesis of heterocyclic compounds

The [3 + 2] cycloadditions of stabilized azomethine ylides (AMYs) derived from amino esters are well-established. However, the reactions of semi-stabilized AMYs generated from decarboxylative condensation of α-amino acids with arylaldehydes are much less explored. The [3 + 2] adducts of α-amino acids could be used for a second [3 + 2] cycloaddition as well as for other post-condensation modifications. This article highlights our recent work on the development of α-amino acid-based [3 + 2] cycloaddition reactions of N-H-type AMYs in multicomponent, one-pot, and stepwise reactions for the synthesis of diverse heterocycles related to some bioactive compounds and natural products.

Synthesis of Enamines, Aldehydes, and Nitriles from CO2: Scope of the One-Pot Strategy via Formamides

Tetrabutylammonium acetate (TBAA) and Cu(OAc)2 worked as a binary catalytic system for the solvent-free N-formylation of amines with CO2 and PhSiH3. This catalysis making C-H and C-N bonds with CO2 was coupled with the C-C bond-forming reactions to achieve the one-pot synthesis of enamines, aldehydes, and nitriles. The X-ray crystal structure of a Cu(OAc)2-TBAA complex was also revealed.

Recent advances in synthesizing and utilizing nitrogen-containing heterocycles

The use of organocatalysts and a pot economy has strengthened recent organic syntheses. Synthetic methodologies may be applicable in laboratory preparation or in the industrial production of valuable organic compounds. In most cases, synthetic challenges are overcome by highly efficient and environmentally benign organocatalysts in a pot-economical manner. This is exemplified by the recent synthesis of tetrahydropyridine-containing (-)-quinine.

Visible-light-mediated synthesis of oxime esters via multicomponent reactions of aldehydes, aryl amines, and N-hydroxyphthalimide esters

Oxime esters are useful scaffolds in many organic chemistry transformations. Herein, a novel visible-light-mediated three-component reaction for synthesis of oxime esters is reported. Aldehydes, aniline, and N-hydroxyphthalimide (NHPI) esters were used as substrates in this three-component reaction, and eosin Y was used as a crucial photocatalyst for the reaction. Wide ranges of aldehydes and NHPI esters were well tolerated in this reaction method, generating various oxime esters with high efficiency under mild reaction conditions. This visible-light-mediated methodology will be a promising approach to synthesize useful oxime esters in a single step.

Aluminium-catalysed synthesis of aryl enol ethers from phenols and dimethyl ketals

We report an environmentally friendly, aluminium-catalysed, halide- and transition metal-free method for the synthesis of aryl enol ethers from phenols and dimethyl ketals that involves ketal exchange driven by the removal of methanol. The obtained aryl enol ethers were transformed into the corresponding diaryl ethers by Pd/C-catalysed dehydrogenation or DDQ oxidation.

Direct synthesis of haloaromatics from nitroarenes via a sequential one-pot Mo-catalyzed reduction/Sandmeyer reaction

Herein, we report the direct synthesis of a wide variety of functionalized aromatic bromides, chlorides, iodides, and fluorides from nitroarenes in a sequential one-pot operation. This protocol is based on an air- and moisture-tolerant dioxomolybdenum-catalyzed reduction of nitroaromatics, employing pinacol as a reducing agent, which enables subsequent diazotization and halogenation steps. This methodology represents a step-economical, practical, and alternative procedure for synthesizing haloaromatics directly from nitroaromatics.

Synthesis and Biological Evaluation of Novel Uracil Derivatives as Thymidylate Synthase Inhibitors

Cell division is driven by nucleic acid metabolism, and thymidylate synthase (TYMS) catalyzes a rate-limiting step in nucleotide synthesis. As a result, thymidylate synthase has emerged as a critical target in chemotherapy. 5-Fluorouracil (5-FU) is currently being used to treat a wide range of cancers, including breast, pancreatic, head and neck, colorectal, ovarian, and gastric cancers The objective of this study was to establish a new methodology for the low-cost, one-pot synthesis of uracil derivatives (UD-1 to UD-5) and to evaluate their therapeutic potential in BC cells. One-pot organic synthesis processes using a single solvent were used for the synthesis of drug analogues of Uracil. Integrated bioinformatics using GEPIA2, UALCAN, and KM plotter were utilized to study the expression pattern and prognostic significance of TYMS, the key target gene of 5-fluorouracil in breast cancer patients. Cell viability, cell proliferation, and colony formation assays were used as in vitro methods to validate the in silico lead obtained. BC patients showed high levels of thymidylate synthase, and high expression of thymidylate synthase was found associated with poor prognosis. In silico studies indicated that synthesized uracil derivatives have a high affinity for thymidylate synthase. Notably, the uracil derivatives dramatically inhibited the proliferation and colonization potential of BC cells in vitro. In conclusion, our study identified novel uracil derivatives as promising therapeutic options for breast cancer patients expressing the augmented levels of thymidylate synthase.

Silver-Containing Biomaterials for Biomedical Hard Tissue Implants

Bacterial infection caused by biomaterials is a very serious problem in the clinical treatment of implants. The emergence of antibiotic resistance has prompted other antibacterial agents to replace traditional antibiotics. Silver is rapidly developing as an antibacterial candidate material to inhibit bone infections due to its significant advantages such as high antibacterial timeliness, high antibacterial efficiency, and less susceptibility to bacterial resistance. However, silver has strong cytotoxicity, which can cause inflammatory reactions and oxidative stress, thereby destroying tissue regeneration, making the application of silver-containing biomaterials extremely challenging. In this paper, the application of silver in biomaterials is reviewed, focusing on the following three issues: 1) how to ensure the excellent antibacterial properties of silver, and not easy to cause bacterial resistance; 2) how to choose the appropriate method to combine silver with biomaterials; 3) how to make silver-containing biomaterials in hard tissue implants have further research. Following a brief introduction, the discussion focuses on the application of silver-containing biomaterials, with an emphasis on the effects of silver on the physicochemical properties, structural properties, and biological properties of biomaterials. Finally, the review concludes with the authors' perspectives on the challenges and future directions of silver in commercialization and in-depth research.

Organocatalyst-mediated, pot-economical total synthesis of latanoprost

The enantioselective total synthesis of latanoprost, an antiglaucoma agent, has been accomplished with excellent diastereo- and enantioselectivities in a pot-economical manner using six reaction vessels. An enantioselective Krische allylation was conducted in the first pot. In the second pot, olefin metathesis, silyl protection, and hydrogenolysis proceeded efficiently. In the third pot, an organocatalyst-mediated Michael reaction proceeded with excellent diastereoselectivity. The fourth pot involved a substrate-controlled Mukaiyama intramolecular aldol reaction and elimination of HNO2 to afford a methylenecyclopentanone, also with excellent diastereoselectivity. The fifth pot involved a Michael reaction of vinyl cuprate. In the sixth pot, three reactions, a cis-selective olefin metathesis, diastereoselective reduction, and deprotection, afforded latanoprost. Nearly optically pure latanoprost was obtained, and the total yield was 24%.

Alkynylated and triazole-linked aroyl-S,N-ketene acetals: one-pot synthesis of solid-state emissive dyes with aggregation-induced enhanced emission characteristics

Alkynylated aroyl-S,N-ketene acetals are readily synthesized in mostly excellent yields by a Sonogashira reaction resulting in a substance library of more than 20 examples. Upon expansion of the reaction sequence by deprotection and concatenating of the copper-click reaction in a one-pot fashion, a library of 11 triazole-ligated aroyl-S,N-ketene acetals is readily accessible. All derivatives show pronounced solid-state emission and aggregation-induced emission properties depending on the nature of the alkynyl or the triazole substituents.

Oxidative Cycloaddition Reactions of Arylboron Reagents via a One-pot Formal Dehydroboration Sequence

Arylboron compounds are widely available and synthetically useful reagents in which the boron group is typically substituted. Herein, we show that the boron group and ortho-hydrogen atom are substituted in a formal cycloaddition reaction. This transformation is enabled by a one-pot sequence involving diaryliodonium and aryne intermediates. The scope of arylboron reagents and arynophiles is demonstrated, and the method is applied to the formal synthesis of an investigational drug candidate.

Ultrasound-assisted-one-pot synthesis and antiplasmodium evaluation of 3-substituted-isoindolin-1-ones

As the attempts to control malaria through chemotherapy strategies are restricted, we have prepared a small library of 3-substituted-isoindolinones from (Z)-3-benzylideneisobenzofuran-1(3H)-ones in one-pot fashion under ultrasound irradiation. The one-pot reaction was scalable and efficiently produced the desired products (1a-m) in high yields in a short reaction time. Evaluation of their in vitro antiplasmodium assay against the 3D7 (chloroquine-sensitive) and FCR3 (chloroquine-resistant) strains of Plasmodium falciparum demonstrated that they displayed moderate to strong antiplasmodium activities (the IC50 values ranging from 4.21-34.80 μM) and low resistance indices. The in silico prediction of ADME and physicochemical properties showed that the synthesized compounds met the drug-likeliness requirements and featured low toxicity effects. Based on the evaluation of the antiplasmodium profiles, 3-substituted-isoindolinone derivatives of 1a, 1d, 1h, and 1l may become potential antiplasmodium candidates.

Construction of Octahydro-4H-cyclopenta[b]pyridin-6-one Skeletons using Pot, Atom, and Step Economy (PASE) Synthesis

Cascade aza-Piancatelli reaction and [3+3]/[4+2] cycloaddition reactions are carried out using the ideality principles of pot, atom, and step economy (PASE) synthesis. The reaction resulted in generation of octahydro-4H-cyclopenta[b]pyridin-6-one scaffolds. Moreover, octahydro-5,7a-epoxycyclopenta[cd]isoindol-4-one frameworks of gracilamine alkaloid and a novel decahydro-1H-dicyclopenta[cd,hi]isoindol-6-one were also realized in good yields with excellent regio- and diastereo-selectivities.

Copper-Mediated Intramolecular Interrupted CuAAC Selanylation

We, herein, describe a copper-mediated domino CuAAC intramolecular selanylation for the synthesis of unprecedented fused benzo[4,5][1,3]selenazolo[3,2-c][1,2,3]triazoles from 1,2-bis(2-azidoaryl)diselenides and terminal alkynes under microwave irradiation. This is the seminal method for the synthesis of these fused heterocycles, and it proceeds under mild conditions, tolerates several functional groups, and can be carried out using environmentally benign solvents such as dimethyl carbonate. This transformation has been successfully extended to TMS-protected alkynes and to bioactive alkynes. A plausible reaction mechanism is proposed based on several control experiments and previous reports.

Ceftazidime-Decorated Gold Nanoparticles: a Promising Strategy against Clinical Ceftazidime-Avibactam-Resistant Enterobacteriaceae with Different Resistance Mechanisms

Nanoparticle-based antibiotic delivery systems are essential in combating antibiotic-resistant bacterial infections arising from acquired resistance and/or biofilm formation. Here, we report that the ceftazidime-decorated gold nanoparticles (CAZ_Au NPs) can effectively kill clinical ceftazidime-avibactam-resistant Enterobacteriaceae with various resistance mechanisms. Further study of underlying antibacterial mechanisms suggests that CAZ_Au NPs can damage the bacterial cell membrane and increase the level of intracellular reactive oxygen species. Moreover, CAZ_Au NPs show great potential in inhibiting biofilm formation and eradicating mature biofilms via crystal violet and scanning electron microscope assays. In addition, CAZ_Au NPs demonstrate excellent performance in improving the survival rate in the mouse model of abdominal infection. In addition, CAZ_Au NPs show no significant toxicity at bactericidal concentrations in the cell viability assay. Thus, this strategy provides a simple way to drastically improve the potency of ceftazidime as an antibiotic and its use in further biomedical applications.

Multistep Cascade Catalytic Reactions Employing Bifunctional Framework Compounds

Multistep cascade reactions are important to achieve atom as well as step economy over conventional synthesis. This approach, however, is limited due to the incompatibility of the available reactive centers in a catalyst. In the present study, new MOF compounds, [Zn₂(SDBA)(3-ATZ)₂]·solvent, I and II, with tetrahedral Zn centers as good Lewis acidic sites and the free amino group of the 3-amino triazole ligand as a strong Lewis base center were shown to perform 4-step cascade/tandem reaction in a facile manner. Effective conversion of benzaldehyde dimethyl acetal in the presence of excess nitromethane at 100 °C in water to 1-(1,3-dinitropropan-2-yl) benzene was achieved in 10 h with yields of ∼95% (I) and ∼94% (II). This 4-step cascade reaction proceeds via deacetalization (Lewis acid), Henry (Lewis base), and Michael (Lewis base) reactions. The present work highlights the importance of spatially separated functional groups in multistep tandem catalysis─the examples of which are not common.

A Streamlined, Green, and Sustainable Synthesis of the Anticancer Agent Erdafitinib

Erdafitinib, an anticancer drug, was synthesized in a three-step two-pot sequence involving ppm levels of Pd catalyst run under aqueous micellar conditions enabled by a biodegradable surfactant. This process features both pot- and time-economies and eliminates egregious organic solvents and toxic reagents associated with existing routes.

A sustainable, efficient, and potentially cost-effective approach to the antimalarial drug candidate MMV688533

A 6-step synthesis of the antimalarial drug candidate MMV688533 is reported. Key transformations carried out under aqueous micellar conditions include two Sonogashira couplings and amide bond formation. Compared with the first-generation manufacturing process reported by Sanofi, the current route features ppm levels of palladium loading, less material input, less organic solvent, and no traditional amide coupling reagents. The overall yield is improved ten-fold, from 6.4% to 67%.